Materials List
Quantity
1
2
10
3
2
4
5
6
7
8
2
6
2
5
2
12
8
4
2
4
1
1
1
1
1
1
1
1
1
2
1
1
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23-26
1
4
Description
Ramp, Grip Strut Safety Grating-1.5" D x 11.75" W x 5' L
Ramp Base- 6 x 6 x 8' timbers with a steel grate deck,
see detail 1, see Item 3 this sheet.
Spacers, recycled plastic lumber-2x8x10' L* "Fiberforce" byBedford Technologies.
PVC water pipe1.5" Sch. 80
Floor, Grip Strut Safety Grating 1.5" D x 11.75" W x10' L
Eyebolts .5" x 1.5" I.D. (motortcycle strap hold)
Fiberglass shower panels 4' x 8' on wash-bay interior walls.
Double Swing Steel Doors. See Detail 2
Heavy duty steel, outdoor hinges 4" x 4" .
Steel Frame -8' x 1.5" x 2" steel tube
Steel brace -8' x 1.5" x 2" steel tube
Heavy duty hasps-8" x 2".
Steel sheet, 27 gauge-3' 11 3/4" x 6' 9 1/2".
Control Panel for washer
Wet/Dry vacuum
Timer Panel
High pressure pump (hand carry pressure washer kit type)
Cutler Hammer 125 amp.max. electric panel
ISO Shipping container 8' (H) x 8' (W)x 20' long
Drum with pump 18"-30 gallon
Centrifugal seperator
*RUWAC main vacuum- ATV wash Down System SO#8094
50 micron filters
Primary Pump-*Flojet
Flush Pump-*Dayton1.5 HP Centrifugal Pump
Partition wall- 2x4x8' stud wall @ 16" o.c. &
Plywood- 4 x 8 x .5" thick and Fiberglass shower siding
Low pressure hose bib
100 gallon Polypropylene tank
Note: * Or approved equal.
Part #
51512-U
51512-U
Supplier
6-Heavy duty steel, outdoor hinges,
weld to steel door.
*Directmetals.com
Local Lumber store
*Directmetals.com
*www.plasticboards.com
Steel Frame 1.5"x 2" steel tube
stitch weld to steel sheet. Prime and
paint to match cargo container.
Local hardware store
*Directmetals.com
*Chicagohardware.com
Local hardware store
Custom steel fabricator
8
Steel brace 1.5"x 2" steel tube
stitch weld to steel sheet.
6'-10"
Item
1500A
ILB
#USFORESTSERVICE.
X100B
4300-043A
2ZWU6
44000115
Local hardware store
Local hardware store
Local hardware store
*Ultimatewasher.com
Local hardware store
*Martin Container-container.com
*ruwac.com
*Lakos.com
*ruwac.com
fsifilters.com
*dultmeier.com
*grainger.com
Local hardware store
Local hardware store
Local hardware store
*Core-Rosion Products
Steel sheet, 27 gauge, typ. stitch weld
all around edges. Grind all sharp & rough
edges smooth.
3'-11 3/4"
Elevation
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
Tank
24.
25.
26.
27.
28.
Entrance/Exit Ramp, (grated steel).
Entrance/Exit ramp base. Pressure treated exit ramp base 6 x
timbers. Steel grate deck with 6x6 timber supports see detail 1.
Spacer 2'x8' Trex or approved equal, cut to size.
Flush water pipe. Run along wall, see detail 1 sheet 13.
Steel grate floor over poly. sump pan.
Eye Bolts with stabilizer motorcycle cam buckle straps
Install a fiberglass shower siding and waterproof on all interior
walls in wash bay. Bond to plywood with waterproof adhesive.
Entrance/exit folding steel door. 27 gauge steel hinge doors
with heavy duty hasp lock, see detail 2.
Washer Control Panel.
Wet/dry vacuum.
Timer panel.
High pressure pump.
Cutler Hammer 125 amp.max. electric panel.
ISO shipping container L-20', W-8', H-8'-6" w/wood floor.
Drum 18"-30 gallon with pump.
Centrifugal separator.
RUWAC main vaccum
50 micron filter units.
Primary pump.
Flush pump.
Framed wall 2' x 4', paneled w/1/2" plywood on wash bay side
with a fiberglass shower siding and waterproof finish.
Low pressure hose bib.
100 gallon watertank (sump flushing) on 24" support rings.
pumps located beneath tank stand. (see sheet 7) tank #1.
100 gallon water settling tank on 24" support rings. Water tank
pumps located beneath tank stand.(see sheet 7) Tank #2
100 gallon fresh water tank on 24" support rings. Water tank
pumps located beneath tank stand.(see sheet 7) Tank #3
100 gallon fresh water tank on 24" support rings. Water tank
pumps located beneath tank stand. (see sheet 7) Tank #4
Lower Tank Support. (See sheet 8)
Poly. sump outline.
2
8
11
4
12
Double Swing Steel Door Detail
Scale 1/2"=1'
Connect a 3/16" galv. 1 1/2" x 2" angle
with 3/8" galv. hex bolts and washers to
each grate end.
5'
Ramp 12% max., Grip Strut Safety
Grating see materials item 1.
1
13
9
2
14
3
Entry deck, Grip Strut Safety Grating
see materials item 1.
6x6 pressure treated (P.T.) timber.
Entry deck 2x6 P.T.
Ramp
outline
See strap
detail "A"
Entry deck Safety
Grate Typ.
2'-6"
4
10
slope to drain 1% min.
15
5
6
16
ATV Wash Bay
with Sump
Water Filtration &
Recycling Room
17
7
28
6x6 P.T. timber
Compacted gravel typ.
4x6 P.T. timber
Side Elevation
Front Elevation
2x6 P.T. lumber typ.
4x6 P.T. timber typ.
19
18
20
3/16" galv. strap
2x6 P.T. lumber typ.
4x6 P.T. timber typ.
18
A
4
8.
B
4
1
A
4
1.
2.
6
3.
4.
5.
6.
7.
3'-11 3/4"
8'
5'
See detail 2, typ.
Notes
Heavy duty hasp, weld to steel door.
26
25
24
23
Tank 4
Tank 3
Tank 2
Tank 1
8'
Entry deck, Grip Strut Safety Grating
1.5" D x 11.75" W x 8' L, see materials
item 1. Connect steel grate sections in pairs
with 1/2" diam. hex bolts, washers and nuts.
Optional deck surface: P.T. 4x8 x8' timbers laid
flat for decking, bolt to 6x6's with 1/2" diam. x 10"
long galv. lag screws, adjust deck height to match
washer grated deck.
2'-6"
3
2'
27
2'-6"
2'
2'
21
See detail 1, typ.
10-galv. straps
see detail "A"
22
2'
6x6 pressure treated (P.T.) timber,
connect timbers with two 1/2" diam.
galv. hex bolts, washers and nuts on each
support.
2
1
B
4
Safety Grating typ.
3/16" angle 1 1/2"x 2"
connect to safety
grating typ.
8
5'
3/16" x2"w galv. spacer typ.
Callout Key
4
Section
Sheet Number
Connect ramp safety grating sections
to deck with galv. strap, 1' L x 2" Wx3/16"
and 1/2" diam. lag hex bolts, washers
and nuts. and to the the wood deck
supports with1/2" diam. lag screws,
washers and nuts. 2 straps per section.
Ramp, Grip Strut Safety Grating
5 sections 5' long see materials item 1.
12 % maximum ramp slope. Connect
sections to deck with galv. strap,
1' L x 2" Wx3/16" and 1/2" diam. lag
screws, washers and nuts. Connect
sections with two 1/2" diam.hex bolts,
washers and nuts.
5'
A
1/2"Lag screws typ.
Plan
8'
ATV Washer Equipment Layout Plan
Detail "A"
Scale 1/2"=1'
1
ATV Washer Ramp Detail
No Scale
Scale 1/2"=1'
NOT TO SCALE
ATV WASHER
.
EQUIPMENT LAYOUT
DESIGN CATALOG
X
2
X
X
X
X
X
X
14