Analog Devices Welcomes
Hittite Microwave Corporation
NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
www.analog.com
www.hittite.com
THIS PAGE INTENTIONALLY LEFT BLANK
HMC-C007
v03.1007
CONNECTORIZED MODULES - FREQUENCY DIVIDERS
12
Features
Ultra Low SSB Phase Noise: -150 dBc/Hz
Very Wide Bandwidth
Output Power: -4 dBm
Single DC Supply: +5V
Typical Applications
Prescaler for 0.5 to 18 GHz PLL Applications:
• Point-to-Point / Multi-Point Radios
• VSAT Radios
Hermetically Sealed Module
Field Replaceable SMA Connectors
-55 to +85 °C Operating Temperature
General Description
• Fiber Optic
• Test Equipment
• Military & Space
Functional Diagram
The HMC-C007 is a low noise Divide-by-8 Static
Divider utilizing InGaP GaAs HBT technology packaged in a miniature, hermetic module with replacable
SMA connectors. This device operates from 0.5 to 18
GHz input frequency from a single +5V DC supply.
The low additive SSB phase noise of -150 dBc/Hz
at 100 kHz offset helps the user maintain excellent
system noise performance.
Electrical Specifi cations, TA = +25° C, 50 Ohm System, Vcc= +5V
Parameter
Conditions
Maximum Input Frequency
Minimum Input Frequency
Input Power Range
Min.
Typ.
18
19
Sine Wave Input
Max.
Units
GHz
0.5
GHz
Fin = 2 to 4 GHz
-15
-10
+10
dBm
Fin = 4 to 12 GHz
-20
-15
+10
dBm
Fin = 12 to 14 GHz
-20
-15
+5
dBm
Fin = 14 to 18 GHz
-15
-10
0
dBm
Output Power
Fin = 0.5 to 18 GHz
-7
Reverse Leakage
Fin = 0.5 to 18 GHz
55
dB
Pin = 0 dBm, Fin = 4.8 GHz
-150
dBc/Hz
Pin = 0 dBm, Fout = 882 MHz
100
ps
98
mA
SSB Phase Noise (100 kHz offset)
Output Transition Time
Supply Current (Icc)
12 - 10
DIVIDE-BY-8 PRESCALER
MODULE, 0.5 - 18 GHz
-4
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
dBm
HMC-C007
v03.1007
DIVIDE-BY-8 PRESCALER
MODULE, 0.5 - 18 GHz
15
10
10
5
5
Recommended
Operating Window
-5
-10
-15
-20
0
Min Pin +25C
Max Pin +25C
Min Pin +85C
Max Pin +85C
Min Pin -55C
Max Pin -55C
-5
-10
-15
-20
-25
-25
0
2
4
6
8
10
12
14
16
18
20
0
2
4
6
INPUT FREQUENCY (GHz)
0
-20
SSB PHASE NOISE (dBc/Hz)
OUTPUT POWER (dBm)
0
-1
-2
-3
-4
-5
-6
+25C
+85C
-55C
-8
-9
-10
0
2
4
6
8
10
12
14
16
18
16
18
20
-80
-100
-120
-140
3
4
10
5
10
6
10
7
10
10
OFFSET FREQUENCY (Hz)
Reverse Leakage, Pin= 0 dBm, T= 25 °C
0
0
-10
-10
OUTPUT LEVEL (dBm)
OUTPUT LEVEL (dBm)
14
-60
-160
2
10
20
Output Harmonic Content,
Pin= 0 dBm, T= 25 °C
-20
-30
-40
Pfeedthru
2nd Harmonic
3rd Harmonic
-60
12
-40
INPUT FREQUENCY (GHz)
-50
10
SSB Phase Noise Performance,
Pin= 0 dBm, T= 25 °C
Output Power vs. Temperature
-7
8
INPUT FREQUENCY (GHz)
-20
-30
-40
CONNECTORIZED MODULES - FREQUENCY DIVIDERS
15
0
12
Input Sensitivity vs. Temperature
INPUT POWER (dBm)
INPUT POWER (dBm)
Input Sensitivity Window, T= 25 °C
-50
-60
-70
-80
-70
0
2
4
6
8
10
12
14
INPUT FREQUENCY (GHz)
16
18
20
0
2
4
6
8
10
12
14
16
18
20
INPUT FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
12 - 11
HMC-C007
v03.1007
DIVIDE-BY-8 PRESCALER
MODULE, 0.5 - 18 GHz
12 - 12
Output Voltage Waveform,
Pin= 0 dBm, Fout= 882 MHz, T= 25 °C
AMPLITUDE (mV)
CONNECTORIZED MODULES - FREQUENCY DIVIDERS
12
Absolute Maximum Ratings
200
Supply Voltage (Vcc)
150
RF Input (Vcc = +5V)
+13 dBm
100
Storage Temperature
-65 to +150 °C
Operating Temperature
-55 to +85 °C
ESD Sensitivity (HBM)
Class 1A
50
0
+5.5V
-50
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
-100
-150
-200
23
23.2 23.4 23.6 23.8
24
24.2 24.4 24.6 24.8
25
Typical Supply Current vs. Vcc
TIME (nS)
Vcc
Icc (mA)
4.75
87
5.00
98
5.25
110
Note: Divider will operate over full voltage range shown above
Pin Description
Pin Number
Function
Description
1
RFIN &
RF Ground
RF input connector, SMA female, field replaceable.
RF Input is AC coupled.
2
RFOUT &
RF Ground
RF output connector, SMA female, field replaceable.
Divided output is AC coupled.
3
Vcc
Supply voltage 5V ± 0.25V.
4
GND
Power supply ground.
Interface Schematic
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
HMC-C007
v03.1007
DIVIDE-BY-8 PRESCALER
MODULE, 0.5 - 18 GHz
NOTES:
Package Information
Package Type
C-1
Package Weight [1]
10.2 gms [2]
Spacer Weight
N/A
[1] Includes the connectors
[2] ±1 gms Tolerance
CONNECTORIZED MODULES - FREQUENCY DIVIDERS
12
Outline Drawing
1. PACKAGE, LEADS, COVER MATERIAL: KOVAR™
2. BRACKET MATERIAL: ALUMINUM
3. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN., OVER
ELECTROLYTIC NICKEL 75 MICROINCHES MIN.
4. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. TOLERANCES ±.005 [0.13] UNLESS OTHERWISE SPECIFIED.
6. FIELD REPLACEABLE SMA CONNECTORS.
TENSOLITE 5602 - 5CCSF OR EQUIVALENT.
7. TO MOUNT MODULE TO SYSTEM PLATFORM REPLACE 0 -80
HARDWARE WITH DESIRED MOUNTING SCREWS.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
12 - 13