Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC-C005 v03.1007 CONNECTORIZED MODULES - FREQUENCY DIVIDERS 12 Features Ultra Low SSB Phase Noise: -150 dBc/Hz Very Wide Bandwidth Output Power: -4 dBm Single DC Supply: +5V Typical Applications Prescaler for 0.5 to 18 GHz PLL Applications: • Point-to-Point / Multi-Point Radios • VSAT Radios Hermetically Sealed Module Field Replaceable SMA Connectors -55 to +85 °C Operating Temperature General Description • Fiber Optic • Test Equipment • Military & Space Functional Diagram The HMC-C005 is a low noise Divide-by-2 Static Divider utilizing InGaP GaAs HBT technology packaged in a miniature, hermetic module with replaceable SMA connectors. This device operates from 0.5 to 18 GHz input frequency from a single +5V DC supply. The low additive SSB phase noise of -150 dBc/ Hz at 100 kHz offset helps the user maintain excellent system noise performance. Electrical Specifi cations, TA = +25° C, 50 Ohm System, Vcc= +5V Parameter Conditions Maximum Input Frequency Minimum Input Frequency Input Power Range Min. Typ. 18 19 Sine Wave Input Max. Units GHz 0.5 GHz Fin = 2 to 4 GHz -15 -10 +10 dBm Fin = 4 to 14 GHz -20 -15 +10 dBm Fin = 14 to 16 GHz -20 -15 +5 dBm Fin = 16 to 18 GHz -15 -10 0 dBm Output Power Fin = 0.5 to 18 GHz -7 Reverse Leakage Fin = 0.5 to 18 GHz 55 dB Pin = 0 dBm, Fin = 4.8 GHz -150 dBc/Hz Pin = 0 dBm, Fout = 882 MHz 100 ps 75 mA SSB Phase Noise (100 kHz offset) Output Transition Time Supply Current (Icc) 12 - 2 DIVIDE-BY-2 PRESCALER MODULE, 0.5 - 18 GHz -4 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com dBm HMC-C005 v03.1007 DIVIDE-BY-2 PRESCALER MODULE, 0.5 - 18 GHz 15 10 10 5 5 Recommended Operating Window -5 -10 -15 -20 Min Pin +25C Max Pin +25C Min Pin +85C Max Pin +85C Min Pin -55C Max Pin -55C 0 -5 -10 -15 -20 -25 -25 0 2 4 6 8 10 12 14 16 18 20 0 2 4 6 INPUT FREQUENCY (GHz) 0 -20 SSB PHASE NOISE (dBc/Hz) OUTPUT POWER (dBm) 0 -1 -2 -3 -4 -5 -6 +25C +85C -55C -8 -9 -10 0 2 4 6 8 10 12 14 16 18 14 16 18 20 -60 -80 -100 -120 -140 -160 2 10 20 3 4 10 5 10 6 10 7 10 10 OFFSET FREQUENCY (Hz) Output Harmonic Content, Pin= 0 dBm, T= 25 °C Reverse Leakage, Pin= 0 dBm, T= 25 °C 0 0 -5 -10 -10 OUTPUT LEVEL (dBm) OUTPUT LEVEL (dBm) 12 -40 INPUT FREQUENCY (GHz) -15 -20 -25 Pfeedthru -30 10 SSB Phase Noise Performance, Pin= 0 dBm, T= 25 °C Output Power vs. Temperature -7 8 INPUT FREQUENCY (GHz) 3rd Harmonic -20 -30 CONNECTORIZED MODULES - FREQUENCY DIVIDERS 15 0 12 Input Sensitivity vs. Temperature INPUT POWER (dBm) INPUT POWER (dBm) Input Sensitivity Window, T= 25 °C -40 -50 -60 -35 -40 -70 0 2 4 6 8 10 12 14 INPUT FREQUENCY (GHz) 16 18 20 0 2 4 6 8 10 12 14 16 18 20 INPUT FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 12 - 3 HMC-C005 v03.1007 DIVIDE-BY-2 PRESCALER MODULE, 0.5 - 18 GHz 12 - 4 Output Voltage Waveform, Pin= 0 dBm, Fout= 882 MHz, T= 25 °C AMPLITUDE (mV) CONNECTORIZED MODULES - FREQUENCY DIVIDERS 12 Absolute Maximum Ratings 200 Supply Voltage (Vcc) 150 RF Input (Vcc = +5V) +13 dBm 100 Storage Temperature -65 to +150 °C Operating Temperature -55 to +85 °C ESD Sensitivity (HBM) Class 1A 50 0 +5.5V -50 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS -100 -150 -200 23 23.2 23.4 23.6 23.8 24 24.2 24.4 24.6 24.8 TIME (nS) 25 Typical Supply Current vs. Vcc Vcc Icc (mA) 4.75 66 5.00 75 5.25 84 Note: Divider will operate over full voltage range shown above Pin Description Pin Number Function Description 1 RFIN & RF Ground RF input connector, SMA female, field replaceable. RF Input is AC coupled. 2 RFOUT & RF Ground RF output connector, SMA female, field replaceable. Divided output is AC coupled.. 3 Vcc Supply voltage 5V ± 0.25V. 4 GND Power supply ground. Interface Schematic For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com HMC-C005 v03.1007 DIVIDE-BY-2 PRESCALER MODULE, 0.5 - 18 GHz Package Information Package Type C-1 Package Weight [1] 10.2 gms [2] Spacer Weight N/A NOTES: CONNECTORIZED MODULES - FREQUENCY DIVIDERS 12 Outline Drawing 1. PACKAGE, LEADS, COVER MATERIAL: KOVAR™ 2. BRACKET MATERIAL: ALUMINUM 3. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN., OVER [1] Includes the connectors [2] ±1 gms Tolerance ELECTROLYTIC NICKEL 75 MICROINCHES MIN. 4. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. TOLERANCES ±.005 [0.13] UNLESS OTHERWISE SPECIFIED. 6. FIELD REPLACEABLE SMA CONNECTORS. TENSOLITE 5602 - 5CCSF OR EQUIVALENT. 7. TO MOUNT MODULE TO SYSTEM PLATFORM REPLACE 0 -80 HARDWARE WITH DESIRED MOUNTING SCREWS. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 12 - 5