Industrial
Elevating Rack Guard
The InCord Elevating Rack Guard is
an easy to operate vertical gate safety
system designed to protect elevated
rack loading and storage areas.
The Elevating Rack Guard can be
quickly opened and closed from the
floor below using a simple pull rope
providing unrestricted access and protection to the loading area.
Installed between the columns and
cross beams of two bays, Elevating
Rack Guard takes advantage of existing
framework to transform an open bay into
a gated safety system.
The Elevating Rack Guard can easily be
installed and operated in either a drop to
close or drop to open configuration with
a right or left hand pull.
The economical
and simple solution
for maintaining a
safe and productive
Features:
work area
• Quick and easy setup to
existing racks with U-bolt
attachment, no hole drilling
• Simple pull rope to raise
and lower the safety gate
• Steel cable guides for
smooth gate operation
• Economical, durable, low
maintenance design
Fall protection using
InCord safety netting
systems keeps people
safe both above and
below the work area.
InCord • 800.596.1066 • incord.com
The Elevating Rack Guard Safety System is an easy to
operate solution to loading bay safety
Why is the InCord Elevating Rack Guard the best solution for your loading and unloading process?
The manually operated safety gate system has very few moving parts and is easily operated by any
employee on the floor. The lightweight sliding crossbar with pull rope makes the system easy to use
with a simple hand-over hand action.
Protecting Your
World
Turnbuckle
Assembly
Snap Hook
(60 mm)
Guide Cable
Right Column
Left Column
L
R
Beam
Upper
Left Offset
Long Lift
Line
Upper Right
Offset
The safety net gate is constructed
from high strength InCord M1250 yellow two inch
mesh HTPP knotless netting with stitched border
rope.
Safety Net
Short
Lift Line
Snap Hook
(60 mm)
Lower Left
Offset
Lower Right
Offset
Sliding Cross Bar
with 60 mm Snap Hooks
Netting Specifications
Style: Raschel Knotless Netting
Fiber....................High Tenacity, Polypropylene (HTPP)
Beam
Cord Diameter.....1/8 inch (3 mm)
Mesh Size............2 inch (50 mm) square opening
Drop to Close with right hand pull
configuration shown.
Mesh Break.........280 lb (1.25 kN)
R
Drop to open with
right hand pull.
L
Drop to close with
left hand pull.
L
Drop to close with
right hand pull.
R
R
L
L
R
Pull Lanyard
Drop to open with
left hand pull.
Call InCord for all your netting needs at 1-800-596-1066
InCord
226 Upton Road
Colchester, CT 06415
Phone: 860-537-1414 • Fax: 860-537-7393
incord.com • netting@incord.com
InCord is an ISO 9001
registered company
CAGE Code No. 1NPR7