Analog Devices Welcomes
Hittite Microwave Corporation
NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
www.analog.com
www.hittite.com
THIS PAGE INTENTIONALLY LEFT BLANK
HMC-C010
v02.1007
600° Analog Phase Shifter
MODULE, 6 - 15 GHz
Features
Wide Bandwidth: 6 - 15 GHz
>600° Phase Shift
Single Positive Voltage Control
Hermetically Sealed Module
Field Replaceable SMA Connectors
Typical Applications
The HMC-C010 is ideal for:
Phase Shifters
6
• Fiber Optics
• Military
• Test Equipment
Functional Diagram
-55 to +85 °C Operating Temperature
General Description
The HMC-C010 is an Analog Phase Shifter which
is controlled via an analog control voltage from 0 to
+5V. The HMC-C010 provides a continuously variable phase shift of 0 to 800 degrees at 6 GHz, and 0
to 450 degrees at 16 GHz, with consistent insertion
loss versus phase shift. The phase shift is monotonic
with respect to control voltage. The control port has a
modulation bandwidth of 50 MHz. The low insertion
loss and extremely robust packaging enable this part
to be used in a wide range of applications including
the phase adjustment of clocks in fiber optic systems
and test equipment. The HMC-C010 is housed in a
miniature hermetic module with replaceable SMA connectors.
Electrical Specifications, TA = +25° C, 50 Ohm System
Parameter
6-1
Frequency (GHz)
Min.
Typ.
Phase Shift Range:
6 - 10 GHz
10 - 15 GHz
600
360
800
600
Insertion Loss
6 - 15 GHz
Return Loss (Input and Output)
6 - 15 GHz
7
dB
Control Voltage Range
6 - 15 GHz
0-5
Volt
Modulation Bandwidth
6 - 15 GHz
50
MHz
Phase Voltage Sensitivity
6 - 15 GHz
120
deg /Volt
Insertion Phase Temperature Sensitivity
6 - 15 GHz
0.5
deg /°C
7
Max.
Units
degrees
degrees
10
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
dB
HMC-C010
v02.1007
600° Analog Phase Shifter
MODULE, 6 - 15 GHz
Phase Shift vs. Control Voltage
Insertion Loss vs. Control Voltage
NORMALIZED PHASE SHIFT (degrees)
+25C
+85C
-55C
-2
-4
-6
-8
-10
900
6 GHz
11 Ghz
15 GHz
750
600
450
300
150
0
0
1
2
3
4
5
0
1
2
Vctl (Vdc)
4
5
6
Insertion Loss vs. Frequency
0
900
750
INSERTION LOSS (dB)
NORMALIZED PHASE SHIFT (degrees)
Phase Shift vs. Frequency @ Vctl = 5V
(Relative to Vctl = 0V)
600
450
+25C
+85C
-55C
300
150
-4
-8
0V
1V
2V
3V
4V
5V
-12
-16
-20
0
5
6
7
8
9
10
11
12
13
14
15
5
16
6
7
8
9
10
11
12
13
14
15
16
15
16
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Return Loss vs. Frequency,
Vctl = 0 to +5V
Output Return Loss vs. Frequency,
Vctl = 0 to +5V
0
0
0V
1V
2V
-5
3V
4V
5V
RETURN LOSS (dB)
RETURN LOSS (dB)
3
Vctl (Vdc)
Phase Shifters
INSERTION LOSS (dB)
0
-10
-15
-20
0V
1V
2V
-5
3V
4V
5V
-10
-15
-20
5
6
7
8
9
10
11
12
FREQUENCY (GHz)
13
14
15
16
5
6
7
8
9
10
11
12
13
14
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
6-2
HMC-C010
v02.1007
600° Analog Phase Shifter
MODULE, 6 - 15 GHz
Input IP3 vs. Control Voltage
90
35
75
30
45
30
15
5
0
0
0
1
2
6
3
4
5
0
1
2
Vctl (Vdc)
3
4
5
Vctl (Vdc)
Insertion Loss vs. Pin @ 7 GHz
Insertion Loss vs. Pin @ 11 GHz
0
0
-1
-2
0V
2V
5V
-3
INSERTION LOSS (dB)
INSERTION LOSS (dB)
Phase Shifters
20
10
6 GHz
11 GHz
15 Ghz
15
-4
-5
-6
-7
-8
-9
0V
2V
5V
-2
-4
-6
-8
-10
-11
-15
-10
-5
0
5
10
15
20
-10
-15
25
-10
-5
NORMALIZED PHASE SHIFT (degrees)
INSERTION LOSS (dB)
0V
2V
5V
-4
-6
-8
-10
-15
-10
-5
0
5
10
INPUT POWER (dBm)
5
10
15
20
25
Phase Shift vs. Pin @ 7 GHz
0
-2
0
INPUT POWER (dBm)
INPUT POWER (dBm)
Insertion Loss vs. Pin @ 15 GHz
6-3
6 GHz
11 GHz
15 GHz
25
60
IP3 (dBm)
2nd HARMONICS (dBc)
Second Harmonics vs. Control Voltage,
Pin = -10 dBm
15
20
25
50
40
0V
2V
5V
30
20
10
0
-10
-20
-15
-10
-5
0
INPUT POWER (dBm)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5
HMC-C010
v02.1007
600° Analog Phase Shifter
MODULE, 6 - 15 GHz
Phase Shift vs. Pin @ 15 GHz
15
0V
2V
5V
10
5
0
-5
-20
-15
-10
-5
0
INPUT POWER (dBm)
5
5
3
1
-1
0V
2V
5V
-3
-5
-20
-15
-10
-5
0
INPUT POWER (dBm)
Absolute Maximum Ratings
Control Voltage (Vctl)
-1 Vdc to +8 Vdc
Input Power (RFIN)
+25 dBm
Channel Temperature (Tc)
150 °C
Continuous Pdiss (T = 85 °C)
(derate 21 mW/°C above 85 °C)
1.36 W
Thermal Resistance
(junction to ground paddle)
48 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-55 to +85 °C
ESD Sensitivity (HBM)
Class 1B
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5
6
Phase Shifters
20
NORMALIZED PHASE SHIFT (degrees)
NORMALIZED PHASE SHIFT (degrees)
Phase Shift vs. Pin @ 11 GHz
6-4
HMC-C010
v02.1007
600° Analog Phase Shifter
MODULE, 6 - 15 GHz
Outline Drawing
Phase Shifters
6
Package Information
NOTES:
1. PACKAGE, LEADS, COVER MATERIAL: KOVAR™
2. BRACKET MATERIAL: ALUMINUM
Package Type
C-1
Package Weight [1]
10.2 gms [2]
ELECTROLYTIC NICKEL 75 MICROINCHES MIN.
Spacer Weight
N/A
4. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS].
[1] Includes the connectors
[2] ±1 gms Tolerance
3. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN., OVER
5. TOLERANCES ±.005 [0.13] UNLESS OTHERWISE SPECIFIED.
6. FIELD REPLACEABLE SMA CONNECTORS.
TENSOLITE 5602 - 5CCSF OR EQUIVALENT.
7. TO MOUNT MODULE TO SYSTEM PLATFORM REPLACE 0 -80
HARDWARE WITH DESIRED MOUNTING SCREWS.
6-5
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
HMC-C010
v02.1007
600° Analog Phase Shifter
MODULE, 6 - 15 GHz
Pin Descriptions
Function
Description
1
RFIN &
RF Ground
RF input connector, SMA female, field replaceable.
This pin is DC blocked and matched to 50 Ohms.
2
RFOUT &
RF Ground
RF output connector, SMA female, field replaceable.
This pin is DC blocked and matched to 50 Ohms.
3
Vctl
Phase shift control pin. Application of a voltage between 0 and 5 volts causes
the transmission phase to change. The DC equivalent circuit is a series connected diode and resistor.
GND
Power supply ground.
Interface Schematic
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
6
Phase Shifters
Pin Number
6-6