Blackfin® Audio EZ-Extender®
Manual
Revision 2.0, April 2006
Part Number
82-000195-01
Analog Devices, Inc.
One Technology Way
Norwood, Mass. 02062-9106
a
Copyright Information
©2006 Analog Devices, Inc., ALL RIGHTS RESERVED. This document
may not be reproduced in any form without prior, express written consent
from Analog Devices, Inc.
Printed in the USA.
Limited Warranty
The Blackfin Audio EZ-Extender is warranted against defects in materials
and workmanship for a period of one year from the date of purchase from
Analog Devices or from an authorized dealer.
Disclaimer
Analog Devices, Inc. reserves the right to change this product without
prior notice. Information furnished by Analog Devices is believed to be
accurate and reliable. However, no responsibility is assumed by Analog
Devices for its use; nor for any infringement of patents or other rights of
third parties which may result from its use. No license is granted by implication or otherwise under the patent rights of Analog Devices, Inc.
Trademark and Service Mark Notice
The Analog Devices logo, Blackfin, VisualDSP++, EZ-KIT Lite, and
EZ-Extender are registered trademarks of Analog Devices, Inc.
All other brand and product names are trademarks or service marks of
their respective owners.
Regulatory Compliance
The Blackfin Audio EZ-Extender has been certified to comply with the
essential requirements of the European EMC directive 89/336/EEC
(inclusive 93/68/EEC) and, therefore, carries the “CE” mark.
The Blackfin Audio EZ-Extender had been appended to Analog Devices
Development Tools Technical Construction File referenced
“DSPTOOLS1” dated December 21, 1997 and was awarded CE Certification by an appointed European Competent Body and is on file.
The EZ-KIT Lite evaluation system contains ESD
(electrostatic discharge) sensitive devices. Electrostatic charges readily accumulate on the human
body and equipment and can discharge without
detection. Permanent damage may occur on devices
subjected to high-energy discharges. Proper ESD
precautions are recommended to avoid performance
degradation or loss of functionality. Store unused
EZ-KIT Lite boards in the protective shipping
package.
CONTENTS
PREFACE
Product Overview .......................................................................... vii
Purpose of This Manual ................................................................ viii
Intended Audience .......................................................................... ix
Manual Contents ............................................................................ ix
What’s New in This Manual ............................................................. x
Technical or Customer Support ........................................................ x
Supported Products ......................................................................... xi
Product Information ....................................................................... xi
Related Documents ................................................................... xi
Notation Conventions ................................................................... xiii
AUDIO EZ-EXTENDER INTERFACES
Audio EZ-Extender Setup ............................................................. 1-1
Analog Audio Interface .................................................................. 1-2
Digital Audio Interface .................................................................. 1-4
AUDIO EZ-EXTENDER HARDWARE REFERENCE
System Architecture ...................................................................... 2-2
Configuration Jumpers and Switches ............................................. 2-4
Blackfin Audio EZ-Extender Manual
v
CONTENTS
ADSP-BF537 EZ-KIT Lite Select Jumper (JP1.1/2) ................. 2-5
EZ-KIT Lite SPORT0 Enable Jumper (JP1.3/4) ...................... 2-6
EZ-KIT Lite SPORT1 Enable Jumper (JP1.5/6) ...................... 2-6
SPORT Select Jumper (JP1.7/8) .............................................. 2-6
AD1938 MCLK Source Jumper (JP2) ...................................... 2-6
SPDIF Loopback Jumper (JP4) ............................................... 2-7
Analog Input Gain Switches (SW1–4) ..................................... 2-7
AUDIO EZ-EXTENDER BILL OF MATERIALS
AUDIO EZ-EXTENDER SCHEMATIC
Title Page ..................................................................................... B-1
Expansion Interface (1 and 2) ....................................................... B-2
Expansion Interface (3) ................................................................. B-3
Configuration ............................................................................... B-4
ADAV801–Digital Audio .............................................................. B-5
AD1938–Analog Audio ................................................................ B-6
Analog In 1 .................................................................................. B-7
Analog In 2 .................................................................................. B-8
Analog In 3 .................................................................................. B-9
Analog In 4 ................................................................................ B-10
Analog Out 1 ............................................................................. B-11
Analog Out 2 ............................................................................. B-12
INDEX
vi
Blackfin Audio EZ-Extender Manual
PREFACE
Thank you for purchasing the Blackfin® Audio EZ-Extender®, Analog
Devices, Inc. (ADI) daughter board to the EZ-KIT Lite® evaluation system for the ADSP-BF533, ADSP-BF537, and ADSP-BF561 Blackfin
processors.
The Blackfin processors are embedded processors that support a Media
Instruction Set Computing (MISC) architecture. This architecture is the
natural merging of RISC, media functions, and digital signal processing
characteristics towards delivering signal processing performance in a
microprocessor-like environment.
The EZ-KIT Lite and Audio EZ-Extender are designed to be used in conjunction with the VisualDSP++® development environment.
VisualDSP++ offers a powerful programming tool with new flexibility that
significantly decreases the time required to port software code to a processor, reducing time-to-market.
To learn more about Analog Devices development software, go to
http://www.analog.com/processors/tools/.
Product Overview
The Blackfin Audio EZ-Extender is a separately sold daughter board that
plugs onto the expansion interface of the ADSP-BF533, ADSP-BF537, or
ADSP-BF561 EZ-KIT Lite evaluation system. The daughter board aids
the design and prototyping phases of ADSP-BF533, ADSP-BF537, and
ADSP-BF561 processor targeted applications.
Blackfin Audio EZ-Extender Manual
vii
Purpose of This Manual
The board extends the capabilities of the evaluation system by providing a
connection to thee audio codecs, including two analog audio codecs and
one dual analog/digital audio codec with an interface to digital Sony Philips Digital Interface (SPDIF) audio.
The following is a list of the Blackfin Audio EZ-Extender interfaces.
• Analog audio interface
D
D
D
AD1938 – Analog Devices 192 kHz audio codecs
Four stereo analog audio inputs via RCA jacks
Eight stereo analog audio outputs via RCA jacks
• Digital audio interface
One ADAV801 – Analog Devices SPDIF transceiver with sample
rate converter
D One SPDIF input via a RCA jack
D
One SPDIF output via a RCA jack
• Expansion interface on both sides of the board for stacking other
EZ-Extender boards
Before using any of the interfaces, follow the setup procedure in “Audio
EZ-Extender Setup” on page 1-1.
Example programs are available to demonstrate the capabilities of the
Blackfin Audio EZ-Extender board.
Purpose of This Manual
The Blackfin Audio EZ-Extender Manual describes the operation and configuration of the components on the extension board. A schematic and a
bill of materials are provided as a reference for future Blackfin processor
board designs.
viii
Blackfin Audio EZ-Extender Manual
Preface
Intended Audience
This manual is a user’s guide and reference to the Blackfin Audio
EZ-Extender. Programmers who are familiar with the Analog Devices
Blackfin processor architecture, operation, and development tools are the
primary audience for this manual.
Programmers who are unfamiliar with VisualDSP++ or EZ-KIT Lite evaluation software should refer to the ADSP-BF533, ADSP-BF537, or
ADSP-BF561 Evaluation System Manual, VisualDSP++ online Help, and
user’s or getting started guides. For the locations of these documents, refer
to “Related Documents”.
Manual Contents
The manual consists of:
• Chapter 1, “Audio EZ-Extender Interfaces” on page 1-1
Provides basic board information.
• Chapter 2, “Audio EZ-Extender Hardware Reference” on page 2-1
Provides information on the hardware aspects of the board.
• Appendix A, “Audio EZ-Extender Bill Of Materials” on page A-1
Provides a list of components used to manufacture the
EZ-Extender board.
• Appendix B, “Audio EZ-Extender Schematic” on page B-1
Provides the resources to allow EZ-KIT Lite board-level debugging
or to use as a reference design.
B now is part of the online Help. The lastest schematics
L Appendix
for the product can be found on the Analog Devices Web site,
www.analog.com/processors.
Blackfin Audio EZ-Extender Manual
ix
What’s New in This Manual
What’s New in This Manual
This Blackfin Audio EZ-Extender Manual has been updated for the latest
revision of VisualDSP++.
Technical or Customer Support
You can reach Analog Devices, Inc. Customer Support in the following
ways:
• Visit the Embedded Processing and DSP products Web site at
http://www.analog.com/processors/technicalSupport
• E-mail tools questions to
processor.tools.support@analog.com
• E-mail processor questions to
processor.support@analog.com (World wide support)
processor.europe@analog.com (Europe support)
processor.china@analog.com (China support)
• Phone questions to 1-800-ANALOGD
• Contact your Analog Devices, Inc. local sales office or authorized
distributor
• Send questions by mail to:
Analog Devices, Inc.
One Technology Way
P.O. Box 9106
Norwood, MA 02062-9106
USA
x
Blackfin Audio EZ-Extender Manual
Preface
Supported Products
The Blackfin Audio EZ-Extender is designed as an extension board to the
ADSP-BF533, ADSP-BF537, and ADSP-BF561 EZ-KIT Lite evaluation
systems.
Product Information
You can obtain product information from the Analog Devices Web site,
from the product CD-ROM, or from the printed publications (manuals).
Analog Devices is online at www.analog.com. Our Web site provides information about a broad range of products—analog integrated circuits,
amplifiers, converters, and digital signal processors.
Related Documents
For information on product related development software, see the following publications.
Table 1. Related Processor Publications
Title
Description
•
•
General functional description, pinout, and
timing.
•
ADSP-BF533 Embedded Processor Datasheet
ADSP-BF536/ADSP-BF537 Embedded Processor Datasheet
ASP-BF561 Blackfin Embedded Symmetric
Multi-Processor Datasheet
Blackfin Audio EZ-Extender Manual
xi
Product Information
Table 1. Related Processor Publications (Cont’d)
Title
Description
•
Description of internal processor architecture
and all register functions
•
•
ADSP-BF533 Blackfin Processor Hardware
Reference
ADSP-BF537 Blackfin Processor Hardware
Reference
ASP-BF561 Blackfin Processor Hardware
Reference
Blackfin Processor Instruction Set Reference
Description of all allowed processor assembly
instructions.
Table 2. Related VisualDSP++ Publications
Title
Description
•
Description of the EZ-KIT Lite features and
usage.
Note: For the ADSP-BF537 EZ-KIT Lite,
there is additional Getting Started with
ADSP-BF537 EZ-KIT Lite.
•
•
xii
ADSP-BF533 EZ-KIT Lite Evaluation System Manual
ADSP-BF537 EZ-KIT Lite Evaluation System Manual
ADSP-BF561 EZ-KIT Lite Evaluation System Manual
VisualDSP++ User’s Guide
Description of VisualDSP++ features and usage
VisualDSP++ Assembler and Preprocessor Manual
Description of the assembler function and
commands
VisualDSP++ C/C++ Complier and Library
Manual for Blackfin Processors
Description of the complier function and commands for Blackfin processors
VisualDSP++ Linker and Utilities Manual
Description of the linker function and commands
VisualDSP++ Loader and Utilities Manual
Description of the loader function and commands
Blackfin Audio EZ-Extender Manual
Preface
All documentation is available online. Most documentation is available in
printed form.
Visit the Technical Library Web site to access all processor and tools manuals and data sheets:
http://www.analog.com/processors/resources/technicalLibrary.
Notation Conventions
Text conventions used in this manual are identified and described as
follows.
Example
Description
{this | that}
Alternative required items in syntax descriptions appear within curly
brackets and separated by vertical bars; read the example as this or
that. One or the other is required.
[this | that]
Optional items in syntax descriptions appear within brackets and separated by vertical bars; read the example as an optional this or that.
[this,…]
Optional item lists in syntax descriptions appear within brackets
delimited by commas and terminated with an ellipse; read the example
as an optional comma-separated list of this.
.SECTION
Commands, directives, keywords, and feature names are in text with
letter gothic font.
filename
Non-keyword placeholders appear in text with italic style format.
Blackfin Audio EZ-Extender Manual
xiii
Notation Conventions
Example
L
a
[
Description
Note: For correct operation, ...
A Note provides supplementary information on a related topic. In the
online version of this book, the word Note appears instead of this
symbol.
Caution: Incorrect device operation may result if ...
Caution: Device damage may result if ...
A Caution identifies conditions or inappropriate usage of the product
that could lead to undesirable results or product damage. In the online
version of this book, the word Caution appears instead of this symbol.
Warning: Injury to device users may result if ...
A Warning identifies conditions or inappropriate usage of the product
that could lead to conditions that are potentially hazardous for the
devices users. In the online version of this book, the word Warning
appears instead of this symbol.
conventions, which apply only to specific chapters, may
L Additional
appear throughout this document.
xiv
Blackfin Audio EZ-Extender Manual
1 AUDIO EZ-EXTENDER
INTERFACES
This chapter provides the Audio EZ-Extender setup procedure and
describes two types of interfaces the extender supports.
The information is presented in the following order.
• “Audio EZ-Extender Setup” on page 1-1
• “Analog Audio Interface” on page 1-2
• “Digital Audio Interface” on page 1-4
Audio EZ-Extender Setup
It is very important to set up all of the components of the system containing the Audio EZ-Extender before applying power to that system. The
following procedure is recommended for the correct setup.
Power your system when these steps are completed:
1. Read the applicable design interface section in this chapter—the
text provides an overview of the capabilities of the interface.
2. Read “System Architecture” on page 2-2 to understand the physical
connections of the daughter board. For detailed information, refer
to “Audio EZ-Extender Schematic” on page B-1.
3. Refer to the readme text files in the
subdirectories of the
VisualDSP++ installation directory for information on how to con…\Blackfin\Examples\Audio EZ-EXTENDER
Blackfin Audio EZ-Extender Manual
1-1
Analog Audio Interface
figure jumpers and switches on both the Audio EZ-Extender and
EZ-KIT Lite boards. For custom setups use “System Architecture”
on page 2-2 in conjunction with “Configuration Jumpers and
Switches” on page 2-4.
Analog Audio Interface
For analog audio applications, the Audio EZ-Extender uses two AD1938
multichannel 192 kHz audio codecs. The AD1938 is a high-performance,
single-chip codec chip that provides four analog-to-digital converters
(ADCs) with differential inputs and eight digital-to-analog converters
(DACs) with single-ended outputs. The DAC outputs operate using
ADI’s patented multibit sigma-delta architecture. The chip provides auxiliary input and output SPORTs for connecting to other codecs, increasing
the number of channels a single SPORT uses. A serial peripheral interface
(SPI) port is included, allowing the microcontroller to adjust volume and
many other audio parameters.
For a picture of the audio interface connections, see Figure 2-1 on
page 2-3. For more detailed information, see “Audio EZ-Extender Schematic” on page B-1. The two AD1938 chips (referred to as AD1938_A
and AD1938_B in the block diagrams) connect in parallel to a single
SPORT. The chips connect for a time-division multiplexed (TDM) output mode:
• At a 48 kHz sample rate, TDM mode allows up to 16 channels of
data to be sent from each chip in each direction. Each chip uses
four of the 16 input channels and eight of the 16 output channels.
The number of channels can be set up in the control registers and
is dependant on the sample rate. As the sample rate increases, the
number of possible channels decreases.
1-2
Blackfin Audio EZ-Extender Manual
Audio EZ-Extender Interfaces
• At 96 kHz, the AD1938 operates with a maximum of eight channels in each direction. At 96 kHz, all of the TDM channels are
used by all analog outputs, but there are still four extra input channels, two of which can be used by the digital inputs.
• At the 192 kHz sample rate, a maximum of four channels in each
direction can be used, meaning that four of the output channels
cannot be used.
The auxiliary SPORTs of the AD1938_A codec connect to the
ADAV801’s auxiliary SPORT (see “System Architecture” on page 2-2 for
more information). The Sony Philips Digital Interface (SPDIF) stream
requires two channels of the TDM stream for each direction: two channels
for left and right input audio, and two channels for left and right output
audio.
If the AD1938 runs at the 48 kHz sample rate, both the input and output
digital streams can be put into the TDM stream. In this case, all of the
clocks in the system must be set up relative to the recovered clock from the
SPDIF input.
At the 96 kHz sample rate, only the SPDIF inputs is able to be added to
the TDM stream. This is because at 96 kHz, only eight outputs channels
are available and they are all being used by the outputs.
The internal phase-locked loop (PLL) of the AD1938 codec can be configured to generate all of the clocking and frame sync signals. The source
clock of the PLL can be from either the serial port frame sync or an externally supplied clock. The external master clock (MCLK) comes from the
ADAV801 codec. A jumper (JP2) allows the master clock to come directly
from the SYSCLK3 pin of the ADAV801 or from a divided version of the
SYSCLK1, either divided by 2 or 4. The divided clocks are necessary when a
sample rate less than 32 kHz is required. Otherwise, a signal clock frequency at the MCLK pin of the AD1938 can generate the 48 kHz, 96 kHz,
or 192 kHz sample rate.
Blackfin Audio EZ-Extender Manual
1-3
Digital Audio Interface
The analog input pins of the AD1938’s input signals operate in the range
from 0 Vrms to 1 Vrms. To allow larger signals to be input at the RCA
jacks, the input amplifiers (external to the AD1938) are capable of attenuating the signals. See “Configuration Jumpers and Switches” on page 2-4
for more information.
The analog output pins of the AD1938’s output signals operate in the
range from 0 Vrms to 1 Vrms. The output amplifiers are set to a gain of
1.5x, giving the system unity gain when switches SW1–4 are all ON.
Example programs demonstrating the capabilities of the audio interface
are included in the …\Blackfin\Examples\Audio EZ-EXTENDER subdirectories of the VisualDSP++ installation directory.
For more information about the AD1938 codecs, go to http://www.analog.com and search for AD1938.
Digital Audio Interface
For digital audio applications, the Audio EZ-Extender uses the ADAV801
codec chip. The ADAV801 chip has an analog stereo input, analog stereo
output, digital stereo input, and a digital stereo output. In addition to
these inputs and outputs, the ADAV801 also has an internal sample rate
converter, which can be used to change the sample rate between the different interfaces. On the Audio EZ-Extender, the analog input and outputs
are not used. The digital interface can operate at up to a 200 kHz sample
rate. The ADAV801 operates in the I2S mode, which allows only two
channels (left and right) of input and two channels of output. It also has
an auxiliary serial port for connecting to other devices. The configuration
registers are configured using an SPI port connected to the processor.
The ADAV801 has two internal PLLs, which can produce all of the necessary internal clocks for the different interfaces of the chip. An external
27 MHz oscillator is used as a clock source for the PLLs. The external
clocks, which also go to the AD1938 codecs, are generated from the PLLs.
1-4
Blackfin Audio EZ-Extender Manual
Audio EZ-Extender Interfaces
The recovered clock from the SPDIF input can be used as a clock input
for the serial ports, as well as for the generated external clock output
SYSCLK3.
The primary serial port of the ADAV801 codec connects to the processor
on the mother board, while the secondary serial port connects to the
AD1938_A codec. For a picture of the digital audio interface connections,
see “System Architecture” on page 2-3. For more detailed information, see
“Audio EZ-Extender Schematic” on page B-1. The internal routing of the
different interfaces of the ADAV801 is completely configurable. The
SPDIF input and output can be separately routed to either or both the
primary and secondary serial ports.
Example programs demonstrating the capabilities of the digital audio
interface are included in the in the
…\Blackfin\Examples\Audio EZ-EXTENDER subdirectories of the VisualDSP++ installation directory.
For more information about the ADAV801 codecs, go to
http://www.analog.com and search for ADAV801.
Blackfin Audio EZ-Extender Manual
1-5
Digital Audio Interface
1-6
Blackfin Audio EZ-Extender Manual
2 AUDIO EZ-EXTENDER
HARDWARE REFERENCE
This chapter describes the hardware design of the Blackfin Audio
EZ-Extender.
The following topics are covered.
• “System Architecture” on page 2-2
Describes the configuration of the daughter board and explains
how the board components interface with the processor and
EZ-KIT Lite.
• “Configuration Jumpers and Switches” on page 2-4
Describes the function of the configuration jumpers and switches.
Blackfin Audio EZ-Extender Manual
2-1
System Architecture
System Architecture
A picture of the board layout, connector and jumper locations is shown in
Figure 2-2 on page 2-5. A block diagram of the Audio EZ-Extender is
shown in Figure 2-1.
The analog audio interface consists of two AD1938 audio codecs (referred
to as AD1938_A and AD1938_B codecs), which use one of the processor’s serial ports (SPORTs). All of the clock and frame sync signals must
be driven by one of the AD1938 chips. The analog audio interface is configured for the time-division multiplexed (TDM) serial mode. In the
TDM mode, a single clock and frame sync are used to transmit and
receive the data. The data signals of the AD1938_A codec connect to the
processor’s primary SPORT TX and RX pins, and the data signals of the
AD1938_B codec connect to the secondary SPORT TX and RX pins (see
“Analog Audio Interface” on page 1-2).
The digital audio interface consists of the ADAV801 codec. The codec
chip communicates in the I2S mode. In the I2S mode, the transmit and
receive clock, along with the frame sync signals, are set individually to
transmit sample rate that is different from the receive sample rate.
The ADAV801 codec has a secondary transmit and receive SPORT,
which is interfaced with the auxiliary SPORT of the AD1938_A codec.
The interface operates in the I2S mode and is mastered by the ADAV801
chip. The interface allows the digital audio data steams to be multiplexed
into the analog audio data stream, facilitating access to all of the data signals via a single SPORT. This is dependent on the sample rate, as
described in “Analog Audio Interface” on page 1-2.
A jumper setting allows the routing of the processor’s SPORTs to be
swapped with the SPORTs of the analog and digital interfaces. If the
SPORT on the mother board is already in use, this feature allows either of
2-2
Blackfin Audio EZ-Extender Manual
Audio EZ-Extender Hardware Reference
Figure 2-1. System Architecture
Blackfin Audio EZ-Extender Manual
2-3
Configuration Jumpers and Switches
the audio interfaces to be used instead. In addition, each SPORT individually can be disabled and not driven by the Audio EZ-Extender on the
mother board. For more information, see the following sections:
• “SPORT Select Jumper (JP1.7/8)” on page 2-6
• “EZ-KIT Lite SPORT1 Enable Jumper (JP1.5/6)” on page 2-6
• “EZ-KIT Lite SPORT0 Enable Jumper (JP1.3/4)” on page 2-6.
Each of the Audio EZ-Extender’s ICs (AD1938_A, AD1938_B, and
ADAV801) is configured using the SPI interface of the processor. Each
chip includes its own chip select pin. On the ADSP-BF537 EZ-KIT Lite,
the location of the chip select signals on the expansion interface is different from that location on the ADSP-BF533 and ADSP-BF561 EZ-KIT
Lites. A jumper is used to define for which EZ-KIT Lite to set up the SPI
select signals. For more information, see “ADSP-BF537 EZ-KIT Lite
Select Jumper (JP1.1/2)” on page 2-5.
All of the expansion interface signals are passed directly through the board
from the EZ-KIT Lite to another set of expansion interface connectors.
This allows other EZ-Extender boards to be attached to the Audio
EZ-Extender.
Configuration Jumpers and Switches
Before using the Blackfin Audio EZ-Extender, follow the steps in “Audio
EZ-Extender Setup” on page 1-1.
Figure 2-2 shows the locations of all of the jumper headers. The jumper
headers are divided to show the placement and rotation of each jumper.
The jumpers are described by the pins of the header on which the jumpers
can be placed. For example, JP1.1/2 refers to a single jumper that can be
placed across pins 1 and 2 of JP1. The dark pin indicates pin 1 of each
header.
2-4
Blackfin Audio EZ-Extender Manual
Audio EZ-Extender Hardware Reference
Figure 2-2. Jumper Locations
ADSP-BF537 EZ-KIT Lite Select Jumper (JP1.1/2)
When interfacing the Audio EZ-Extender with the ADSP-BF537 EZ-KIT
Lite, insert the JP1.1/2 jumper to route the ADSP-BF537 EZ-KIT Lite
SPI select signals to the corresponding codec.
Blackfin Audio EZ-Extender Manual
2-5
Configuration Jumpers and Switches
EZ-KIT Lite SPORT0 Enable Jumper (JP1.3/4)
Installing a jumper at this location enables the SPORT0 signals of the
EZ-KIT Lite to drive and be driven by the Audio EZ-Extender. Do not
install this jumper if SPORT0 is used elsewhere on the mother board.
EZ-KIT Lite SPORT1 Enable Jumper (JP1.5/6)
Installing a jumper at this location enables the SPORT1 signals of the
EZ-KIT Lite to drive and be driven by the Audio EZ-Extender. Do not
install this jumper if SPORT0 is used elsewhere on the mother board.
SPORT Select Jumper (JP1.7/8)
The JP1.7/8 jumper determines how SPORT0 and SPORT1 are routed to the
analog SPORT (SPORT_A) and the digital SPORT interface (SPORT_B). See
Figure 2-1 on page 2-3 for more details. The following table describes the
jumper connections.
SPORT_SEL (JP1.7/8) Setting
Connection
Not installed
SPORT0
SPORT1
= SPORT_B (digital)
= SPORT_A (analog)
Installed
SPORT0
SPORT1
= SPORT_A (analog)
= SPORT_B (digital)
AD1938 MCLK Source Jumper (JP2)
The JP2 jumper determines the source of the master clock (MCLK) of the
AD1938 audio codecs. The standard configuration connects the SYSCLK3
pin of the ADAV801 codec to MCLK by installing the JP2.5/6 jumper.
Two other jumper positions, JP2.1/2 and JP2.3/4, connect MCLK to the
ADAV801 codec’s SYSCLK1 pin divided by 4 and 2, respectively. These
positions can be used to supply the AD1938 codec with lower master
clock frequencies to reach the lower sample rates. For more information
2-6
Blackfin Audio EZ-Extender Manual
Audio EZ-Extender Hardware Reference
about the SYSCLK1 and SYSCLK3 pins, refer to the ADAV801 datasheet.
For more information on the MCLK frequencies and sample rates, see the
AD1938 datasheet.
SPDIF Loopback Jumper (JP4)
The JP4 jumpers are used for test purposes only; the SPDIF jumpers
loop-back the digital output signals to the digital input.
Analog Input Gain Switches (SW1–4)
The SW1–4 switches allow the gain of each analog input to be changed
from 1/(1.5) to 1/(2.12). This is useful when the input signals are too
large for the AD1938 codec to handle. The following table shows which
switch position corresponds to each analog input channel.
Switch Position
Analog Input Channel
SW1.1
AIN1_L
SW1.2
AIN1_R
SW2.1
AIN2_L
SW2.2
AIN2_R
SW3.1
AIN3_L
SW3.2
AIN3_R
SW4.1
AIN4_L
SW4.2
AIN4_R
When the switch is ON, the gain is set to 1/(1.5). When the switch is OFF,
the gain is set to 1/(2.12).
Blackfin Audio EZ-Extender Manual
2-7
Configuration Jumpers and Switches
2-8
Blackfin Audio EZ-Extender Manual
A AUDIO EZ-EXTENDER BILL OF
MATERIALS
The bill of materials corresponds to “Audio EZ-Extender Schematic” on
page B-1. Please check the latest schematic on the Analog Devices Web
site:
http://www.analog.com/Processors/Processors/DevelopmentTools/tec
hnicalLibrary/manuals/DevToolsIndex.html#Evaluation%20Kit%20Manuals.
Ref. Qty.
Description
Reference Designator
Manufacturer
Part Number
1
1
SN74LVC1G08
SOT23-5
U1
TI
SN74LVC1G08DBVR
2
1
74LVC74A
TSSOP14
U9
PHILIPS
74LVC74APW
3
1
27MHZ OSC011
Y1
DIGI-KEY
300-8571-1-ND
4
6
74LVC157 TSSOP16
U3,U6,U10-11,U13,
U16
DIGI-KEY
296-1225-1-ND
5
2
AD1938XSTZ
LQFP48
U7,U18
ANALOG
DEVICES
AD1938XSTZ
6
1
ADAV801ASTZ
LQFP64
U14
ANALOG
DEVICES
ADAV801ASTZ
7
8
AD8608ARUZ
TSSOP14
U4-5,U8,U12,U15,U ANALOG
19,U21-22
DEVICES
AD8608ARUZ
8
3
RCA 4X2 CON011
J4,J7-8
SWITCHCRAFT
PJRAS4X2U01X
9
2
RCA 1X1 CON012
J5-6
SWITCHCRAFT
PJRAN1X1U01X
10
3
0.05 45x2 CON018
P1-3
SAMTEC
TFC-145-32-F-D
Blackfin Audio EZ-Extender Manual
A-1
Ref. Qty.
Description
Reference Designator
Manufacturer
Part Number
11
3
.05 45X2 CON019
J1-3
SAMTEC
SFC-145-T2-F-D-A
12
2
0.05 10X2 CON040
J9-10
SAMTEC
SFC-110-T2-F-D-A
13
4
DIP2 SWT020
SW1-4
C&K
TDA02H0SB1
14
1
IDC 2X1 IDC2X1
JP4
FCI
90726-402HLF
15
5
IDC 1X1 IDC1X1
TP1-2,TP6,TP8-9
SULLINS
PEC01SAAN
16
2
IDC 4X2 IDC4X2
JP1-2
SULLINS
GEC04DAAN
17
2
22PF 50V 5% 0805
C152-153
AVX
08055A220JAT
18
16
600 100MHZ
200MA 0603
FER1-16
DIGI-KEY
490-1014-2-ND
19
1
750 1/10W 5% 0805
R72
VISHAY
CRCW0805750RJNEA
20
1
.082UF 50V 5%
0805
C73
AVX
08055C823JAT2A
21
15
10UF 6.3V 10%
0805
C22,C34-35,C52,
C61,C85,C87,C158,
C161,C167,C172,
C174-175,C182,
C185
AVX
080560106KAT2A
22
1
2.2UF 10V 10%
0805
C72
AVX
0805ZD225KAT2A
23
1
107.0 1/10W 1%
0805
R110
DIGI-KEY
311-107CRTR-ND
24
48
0.1UF 16V 10%
0603
C31,C55,C58,C76,
AVX
C86,C125-130,
C135,C138,
C140-143,C146-147,
C149-150,C154,
C157,C162-165,
C169-171,C176-177,
C179,C183-184,
C189-191,C194-195,
C197,C199-200,
C203,C205-206,
C209-210
A-2
0603YC104KAT2A
Blackfin Audio EZ-Extender Manual
Audio EZ-Extender Bill Of Materials
Ref. Qty.
Description
Reference Designator
Manufacturer
Part Number
25
1
0.01UF 16V 10%
0603
C116
AVX
0603YC103KAT2A
26
4
10UF 10V +80/-20%
0805
C9,C134,C186,C207
PANASONIC
ECJ-2FF1A106Z
27
40
4.7UF 6.3V 20%
0603
C20-21,C28-29,
C38-39,C50-51,
C59-60,C68-69,
C77-78,C88-89,
C117-124,C137,
C144,C155,C159,
C173,C180,C196,
C201,C212-219
PANASONIC
ECJ-1VB0J475M
28
2
.033UF 25V 10%
0603
C44-45
AVX
06033C333KAT2A
29
12
22 1/10W 5% 0603
R27,R55,R58-60,
R65,R128,R130-131,
R133,R142-143
VISHAY
CRCW060322R0JNEA
30
9
0 1/10W 5% 0603
R31,R36,R45,R51,
R63,R68,R77,R81,
R203
PHYCOMP
232270296001L
31
16
237.0 1/10W 1%
0603
R25-26,R39-42,
R53-54,
R56-57,R70-71,
R73-74,R83-84
DIGI-KEY
311-237HRTR-ND
32
16
3.32K 1/10W 1%
0603
R171-178,R186-193
DIGI-KEY
311-3.32KHRTR-ND
33
16
49.9K 1/10W 1%
0603
R111-118,R144-151
DIGI-KEY
311-49.9KHRTR-ND
34
16
604.0 1/10W 1%
0603
R1-8,R101-108
DIGI-KEY
311-604HRTR-ND
35
6
10.0K 1/10W 1%
0603
R119-120,R122-123,
R153-154
DIGI-KEY
311-10.0KHRTR-ND
Blackfin Audio EZ-Extender Manual
A-3
Ref. Qty.
Description
Reference Designator
Manufacturer
Part Number
36
16
5.76K 1/10W 1%
0603
R29-30,R34-35,
R43-44,R49-50,
R61-62,R66-67,
R75-76,R79-80
DIGI-KEY
311-5.76KHRTR-ND
37
8
120PF 50V 5% 0603
C23,C26,C41,C46,C
62,
C65,C80,C82
AVX
06035A121JAT2A
38
16
100PF 50V 5% 0603
C25,C30,C43,C48,
C64,C67,C79,C84,
C133,C148,C151,
C166,C168,C188,
C193,C204
AVX
06035A101JAT2A
39
16
1000PF 50V 5%
0603
C18-19,C32-33,
C36-37,C53-54,
C56-57,C70-71,
C74-75,C90-91
PANASONIC
ECJ-1VC1H102J
40
16
220PF 50V 5% 0603
C5-8,C10-13,
C96-103
PANASONIC
ECJ-1VC1H221J
41
16
2200PF 50V 5%
0603
C108-115,C220-227
PANASONIC
ECJ-1VB1H222K
42
1
75.0 1/10W 1%
0603
R109
DALE
CRCW060375R0FKEA
43
16
270PF 50V 5% 0603
C1-4,C14-17,
C92-95,C104-107
DIGI-KEY
311-1185-2-ND
44
1
243.0 1/10W 1%
0603
R121
VISHAY
CRCW0603243RFKEA
45
3
732.0 1/10W 1%
0603
R47-48,R152
VISHAY
CRCW0603732RFKEA
46
2
562.0 1/10W 1%
0603
R125,R136
VISHAY
CRCW0603562RFKEA
47
2
390PF 25V 5% 0603
C136,C192
AVX
06033A391FAT2A
48
2
1800PF 50V 5%
0805
C40,C49
PANASONIC
ECJ2VB1H182K
A-4
Blackfin Audio EZ-Extender Manual
Audio EZ-Extender Bill Of Materials
Ref. Qty.
Description
Reference Designator
Manufacturer
Part Number
49
2
5600PF 16V 5%
0805
C132,C187
AVX
0805YA562JAT2A
50
8
28.0K 1/10W 1%
0603
R155,R157-158,
R161-162,R165-166,
R169
DIGI-KEY
311-28.0KHTR-ND
51
48
4.99K 1/16W 1%
0603
R9-24,R85-100,
R170,R179-185,
R194-201
VISHAY
CRCW06034K99FKEA
52
8
24.9K 1/10W 1%
0603
R126-127,R129,
R132,R134-135,
R138,R140
DIGI-KEY
311-24.9KHTR-ND
53
1
47UF 6.3V 10% B
CT1
PANASONIC
EEE0JA470WR
54
8
22.6K 1/16W 1%
0603
R124,R156,
R159-160,
R163-164,R167-168
VISHAY
CRCW060322K6FKEA
55
1
GREEN LED001
LED1
PANASONIC
LN1361CTR
Blackfin Audio EZ-Extender Manual
A-5
A-6
Blackfin Audio EZ-Extender Manual
A
B
C
D
1
1
2
2
Blackfin Audio EZ-Extender
Schematic
3
3
8
SPDIF_IN
7
6
5
SPDIF_OUT
ANALOG_OUT
J1
4
ANALOG_IN
J2
3
2
1
ANALOG
DEVICES
J3
4
ANALOG_OUT
RIGHT = RED
LEFT = WHITE
1
2
3
Title
4
Size
A
B
C
Nashua, NH 03063
4
PH: 1-800-ANALOGD
BLACKFIN AUDIO EZ-EXTENDER
TITLE
Board No.
C
Date
20 Cotton Road
Rev
A0195-2005
1.2B
Sheet
4-24-2006_9:56
D
1
of
12
A
B
C
D
3.3V
EXPANSION INTERFACE (TYPE B)
3.3V
5V
R137
10.0K
0603
DNP
3.3V
Expansion Connector 1
Bottom Of Board
Top Of Board
R141
10.0K
0603
DNP
Expansion Connector 2
Bottom Of Board
Top Of Board
1
1
P1_[5:86]
2
3
P1
1
2
2
1
3
4
4
3
P1_5
5
6
P1_6
6
5
P1_5
P1_7
7
8
P1_8
P1_8
8
7
P1_7
P1_9
9
10
P1_10
P1_10
10
9
P1_9
P1_11
11
12
P1_12
P1_12
12
11
P1_11
P1_13
13
14
P1_14
P1_14
14
13
P1_13
P1_15
15
16
P1_16
P1_16
16
15
P1_15
P1_17
17
18
P1_18
P1_18
18
17
P1_19
19
20
P1_20
P1_20
20
19
P1_21
21
22
P1_22
P1_22
22
P1_23
23
24
P1_24
P1_24
24
P1_25
25
26
P1_26
P1_26
P1_27
27
28
P1_28
P1_29
29
30
P1_30
P1_31
31
32
P1_33
33
P1_35
1
2
J2
2
1
3
4
4
3
P2_5
5
6
P2_6
P2_6
6
5
P2_5
P2_7
7
8
P2_8
P2_8
P2_7
9
10
J1
11
12
13
14
P2_15
15
16
P2_16
P1_17
P2_17
17
18
P1_19
P2_19
19
20
21
P1_21
P2_21
21
23
P1_23
P2_23
23
26
25
P1_25
P2_25
P1_28
28
27
P1_27
P1_30
30
29
P1_29
P1_32
P1_32
32
31
P1_31
34
P1_34
P1_34
34
33
P1_33
35
36
P1_36
P1_36
36
35
P1_35
37
38
38
37
P1_39
39
40
P1_40
P1_40
40
39
P1_39
P1_41
41
42
P1_42
P1_42
42
41
P1_41
P1_43
43
44
P1_44
P1_44
44
43
P1_43
P2_43
P1_45
45
46
P1_46
P1_46
46
45
P1_45
P1_47
47
48
P1_48
P1_48
48
47
P1_49
49
50
P1_50
P1_50
50
49
P1_51
51
52
P1_52
P1_52
52
P1_53
53
54
P1_54
P1_54
54
P1_55
55
56
P1_56
P1_56
P1_57
57
58
P1_58
P1_59
59
60
P1_61
61
P1_63
63
P1_65
P1_6
P2
R139
10.0K
0603
DNP
8
7
10
9
12
11
14
13
P2_16
16
15
P2_15
P2_18
P2_18
18
17
P2_17
P2_20
P2_20
20
19
P2_19
22
P2_22
P2_22
22
21
P2_21
24
P2_24
P2_24
24
23
P2_23
25
26
P2_26
P2_26
26
25
P2_25
27
28
28
27
29
30
30
29
31
32
32
31
33
34
34
33
35
36
36
35
37
38
38
37
39
40
40
39
41
42
42
41
43
44
P2_44
P2_44
44
43
P2_43
P2_45
45
46
P2_46
P2_46
46
45
P2_45
P1_47
P2_47
47
48
P2_48
P2_48
48
47
P2_47
P1_49
P2_49
49
50
P2_50
P2_50
50
49
P2_49
51
P1_51
P2_51
51
52
P2_52
P2_52
52
51
P2_51
53
P1_53
P2_53
53
54
P2_54
P2_54
54
53
P2_53
56
55
P1_55
55
56
56
55
ADAV801_SPISEL_BF533_BF561_PF3
P1_58
58
57
P1_57
57
58
58
57
AD1938_B_SPISEL_BF533_BF561_PF1
P1_60
P1_60
60
59
P1_59
P2_59
59
60
P2_60
P2_60
60
59
P2_59
62
P1_62
P1_62
62
61
P1_61
P2_61
61
62
P2_62
P2_62
62
61
P2_61
64
P1_64
P1_64
64
63
P1_63
P2_63
63
64
P2_64
P2_64
64
63
P2_63
65
66
P1_66
P1_66
66
65
P1_65
P2_65
65
66
P2_66
P2_66
66
65
P2_65
P1_67
67
68
P1_68
P1_68
68
67
P1_67
P2_67
67
68
P2_68
P2_68
68
67
P2_67
P1_69
69
70
P1_70
P1_70
70
69
P1_69
P2_69
69
70
P2_70
P2_70
70
69
P2_69
P1_71
71
72
P1_72
P1_72
72
71
P1_71
P2_71
71
72
P2_72
P2_72
72
71
P2_71
P1_73
73
74
P1_74
P1_74
74
73
P1_73
P2_73
73
74
P2_74
P2_74
74
73
P2_73
P1_75
75
76
P1_76
P1_76
76
75
P1_75
75
76
76
75
P1_77
77
78
P1_78
P1_78
78
77
P1_77
P2_77
77
78
P2_78
P2_78
78
77
P2_77
P1_79
79
80
P1_80
P1_80
80
79
P1_79
P2_79
79
80
P2_80
P2_80
80
79
P2_79
P1_81
81
82
P1_82
P1_82
82
81
P1_81
P2_81
81
82
P2_82
P2_82
82
81
P2_81
83
84
P1_84
P1_84
84
83
P2_83
83
84
P2_84
P2_84
84
83
P2_83
85
86
P1_86
P1_86
86
85
P2_85
85
86
P2_86
P2_86
86
85
P2_85
87
88
88
87
87
88
88
87
89
90
90
89
89
90
90
89
AD1938_A_SPISEL_BF537_PF5
P1_85
CON018
SCK
P2_11
DR1SEC
DR1PRI
RFS1
RSCLK1
DR0SEC
DR0PRI
RFS0
RSCLK0
ADAV801_SPISEL_BF533_BF561_PF3
AD1938_B_SPISEL_BF533_BF561_PF1
AD1938_A_SPISEL_BF537_PF5
P1_85
CON019
C207
10UF
0805
MOSI
MOSI
MISO
MISO
DT1SEC
DT1SEC
DT1PRI
DT1PRI
TFS1
TFS1
TSCLK1
TSCLK1
DT0SEC
DT0SEC
DT0PRI
DT0PRI
TFS0
TFS0
TSCLK0
TSCLK0
AD1938_B_SPISEL_BF537_PF4
AD1938_A_SPISEL_BF533_BF561_PF0
CON018
5V
4
P2_[5:86]
SCK
P2_11
DR1SEC
DR1PRI
RFS1
RSCLK1
DR0SEC
DR0PRI
2
RFS0
RSCLK0
3
CON019
3.3V
C206
0.1UF
0603
C22
10UF
0805
ANALOG
DEVICES
C205
0.1UF
0603
Title
Size
A
B
C
Nashua, NH 03063
4
PH: 1-800-ANALOGD
BLACKFIN AUDIO EZ-EXTENDER
EXPANSION INTERFACE (1 + 2)
Board No.
C
Date
20 Cotton Road
Rev
A0195-2005
1.2B
Sheet
4-24-2006_9:56
D
2
of
12
A
B
C
D
EXPANSION INTERFACE (TYPE B)
5V
3.3V
Expansion Connector 3
1
Bottom Of Board
1
Top Of Board
P3_[1:90]
P3_1
2
P3
1
2
P3_2
P3_2
P3_6
J3
2
1
4
3
6
5
P3_5
P3_1
3
4
P3_5
5
6
P3_6
P3_7
7
8
P3_8
P3_8
8
7
P3_7
P3_9
9
10
P3_10
P3_10
10
9
P3_9
P3_11
11
12
P3_12
P3_12
12
11
P3_11
P3_13
13
14
P3_14
P3_14
14
13
P3_13
P3_15
15
16
P3_16
P3_16
16
15
P3_15
P3_17
17
18
18
17
P3_17
P3_19
19
20
P3_20
P3_20
20
19
P3_19
P3_21
21
22
P3_22
P3_22
22
21
P3_23
23
24
24
23
25
26
26
25
27
28
28
27
P3_29
29
30
30
29
P3_31
31
32
P3_32
P3_32
32
P3_33
33
34
P3_34
P3_34
P3_35
35
36
P3_36
P3_37
37
38
P3_39
39
40
P3_41
41
42
ADAV801_SPISEL_BF537_PF10
For Test Purposes Only
J9
2
1
4
3
P3_21
6
5
P3_23
8
7
10
9
12
11
P3_29
14
13
31
P3_31
16
15
34
33
P3_33
18
17
P3_36
36
35
P3_35
20
19
P3_38
P3_38
38
37
P3_37
P3_40
P3_40
40
39
P3_39
P3_42
P3_42
42
41
P3_41
RESET
AIN1_L_CON
AIN1_R_CON
AIN2_L_CON
AIN2_R_CON
43
44
44
43
P3_45
45
46
P3_46
P3_46
46
45
P3_45
P3_47
47
48
P3_48
P3_48
48
47
P3_47
P3_49
49
50
P3_50
P3_50
50
49
P3_49
P3_51
51
52
P3_52
P3_52
52
51
P3_51
P3_53
53
54
P3_54
P3_54
54
53
P3_55
55
56
P3_56
P3_56
56
P3_57
57
58
P3_58
P3_58
P3_59
59
60
P3_60
P3_61
61
62
P3_63
63
64
65
66
P3_67
67
68
P3_68
P3_69
69
70
P3_70
P3_71
71
72
P3_73
73
P3_75
75
P3_77
AOUT1_L_CON
AOUT1_R_CON
AOUT2_L_CON
AOUT2_R_CON
AOUT3_L_CON
AOUT3_R_CON
AOUT4_L_CON
AOUT4_R_CON
2
CON040
J10
3
2
1
4
3
P3_53
6
5
55
P3_55
8
7
58
57
P3_57
10
9
P3_60
60
59
P3_59
12
11
P3_62
P3_62
62
61
P3_61
14
13
P3_64
P3_64
64
63
P3_63
16
15
66
65
18
17
P3_68
68
67
P3_67
P3_70
70
69
P3_69
P3_72
P3_72
72
71
P3_71
74
P3_74
P3_74
74
73
P3_73
76
P3_76
P3_76
76
75
P3_75
77
78
P3_78
P3_78
78
77
P3_77
P3_79
79
80
P3_80
P3_80
80
79
P3_79
P3_81
81
82
P3_82
P3_82
82
81
P3_81
P3_83
83
84
P3_84
P3_84
84
83
P3_83
P3_85
85
86
P3_86
P3_86
86
85
P3_85
87
88
88
87
89
90
P3_90
P3_90
90
89
P3_89
CON018
AIN3_L_CON
AIN3_R_CON
AIN4_L_CON
AIN4_R_CON
20
AOUT5_L_CON
AOUT5_R_CON
AOUT6_L_CON
AOUT6_R_CON
AOUT7_L_CON
AOUT7_R_CON
AOUT8_L_CON
AOUT8_R_CON
19
CON040
3
5V
P3_89
CON019
POWER
LED1
GREEN
LED001
TP9
MH1
MH2
IDC1X1
3.3V
4
C9
10UF
0805
R152
732.0
0603
5V
C127
0.1UF
0603
C134
10UF
0805
TP2
TP6
IDC1X1
IDC1X1
TP8
TP1
IDC1X1
IDC1X1
ANALOG
DEVICES
AGND
C130
0.1UF
0603
Title
Size
A
B
C
Nashua, NH 03063
4
PH: 1-800-ANALOGD
BLACKFIN AUDIO EZ-EXTENDER
EXPANSION INTERFACE (3)
Board No.
C
Date
20 Cotton Road
Rev
A0195-2005
1.2B
Sheet
4-24-2006_9:56
D
3
of
12
A
B
C
D
U11
2
1A
5
2A
11
3A
14
4A
SPORT_A_CLK
SPORT_A_FS
SPORT_A_DIN1
SPORT_A_DIN2
3
1B
6
2B
10
3B
13
4B
SPORT_B_RX_CLK
SPORT_B_RX_LRCLK
SPORT_B_RX_DIN1
1
4
1Y
7
2Y
9
3Y
12
4Y
RSCLK0
RFS0
DR0PRI
DR0SEC
1
15
EN
1
~A/B
SPORT0_EN
74LVC157
TSSOP16
U16
2
1A
5
2A
11
3A
14
4A
3
1B
6
2B
10
3B
13
4B
R202
0
0603
DNP
4
1Y
7
2Y
9
3Y
12
4Y
U10
RSCLK1
RFS1
AD1938_A_SPISEL_BF537_PF5
DR1PRI
AD1938_B_SPISEL_BF537_PF4
DR1SEC
ADAV801_SPISEL_BF537_PF10
2
1A
5
2A
11
3A
14
4A
R203
0
0603
2Y
15
EN
1
~A/B
3Y
3
1B
6
2B
10
3B
13
4B
AD1938_A_SPISEL_BF533_BF561_PF0
SPORT1_EN
1Y
AD1938_B_SPISEL_BF533_BF561_PF1
ADAV801_SPISEL_BF533_BF561_PF3
74LVC157
TSSOP16
4Y
4
AD1938_A_SSEL
7
AD1938_B_SSEL
9
ADAV801_SSEL
12
15
2
U3
2
1A
5
2A
11
3A
14
4A
3
1B
6
2B
10
3B
13
4B
SPORT_B_TX_CLK
SPORT_B_TX_LRCLK
2
EN
1
~A/B
BF537_SEL
74LVC157
TSSOP16
4
1Y
7
2Y
9
3Y
12
4Y
TSCLK0
TFS0
15
EN
1
~A/B
74LVC157
TSSOP16
3.3V
U13
2
1A
5
2A
11
3A
14
4A
3
3
1B
6
2B
10
3B
13
4B
4
1Y
7
2Y
9
3Y
12
4Y
TSCLK1
TFS1
R123
10.0K
0603
R120
10.0K
0603
BF537_SEL
SPORT0_EN
15
EN
1
~A/B
SPORT_SEL
R122
10.0K
0603
SPORT1_EN
SPORT_SEL
74LVC157
TSSOP16
R119
10.0K
0603
JP1
1
2
3
4
5
6
7
8
SPORT_SEL
(JP1.7/8)
Connection
Not Installed
SPORT0 = SPORT_B (Digital)
SPORT1 = SPORT_A (Analog)
Installed
SPORT0 = SPORT_A (Analog)
SPORT1 = SPORT_B (Digital)
3
IDC4X2
U6
DT0PRI
DT0SEC
DT1PRI
DT1SEC
4
2
1A
5
2A
11
3A
14
4A
3
1B
6
2B
10
3B
13
4B
4
1Y
7
2Y
9
3Y
12
4Y
SPORT_A_DOUT1
SPORT_A_DOUT2
SPORT_B_TX_DOUT1
15
EN
1
~A/B
3.3V
C126
0.1UF
0603
C154
0.1UF
0603
C176
0.1UF
0603
C142
0.1UF
0603
C189
0.1UF
0603
ANALOG
DEVICES
C165
0.1UF
0603
Title
74LVC157
TSSOP16
20 Cotton Road
Nashua, NH 03063
4
PH: 1-800-ANALOGD
BLACKFIN AUDIO EZ-EXTENDER
CONFIG
PI3B3257
Size
Board No.
C
Date
A
B
C
Rev
A0195-2005
1.2B
Sheet
4-24-2006_9:56
D
4
of
12
A
B
C
D
3.3V
3.3V
AVDD4
FER15
600
0603
C76
0.1UF
0603
1
C125
0.1UF
0603
U1
1
J6
CON012
R121
243.0
0603
4
SPDIF_OUT
SPDIF_OUT
2
1
2
SN74LVC1G08
SOT23-5
3.3V
AVDD4
R59
22
0603
1
R110
107.0
0805
U2
1
4
2
SN74LVC1G08
SOT23-5
DNP
SPORT_B_TX_CLK
18
48
ADVDD
SPORT_B_TX_DOUT1
59
AVDD3
53
AVDD2
4
AVDD1
U14
SPORT_B_TX_LRCLK
24
ODVDD
34
DVDD2
15
DVDD1
R65
22
0603
26
D_OUT
I_BCLK
R58
22
0603
17
I_LRCLK
19
SPORT_B_RX_CLK
I_SDATA
23
D_IN
R60
22
0603
SPDIF_IN
SPDIF_IN
O_BCLK
SPORT_B_RX_LRCLK
1
AVDD4
O_LRCLK
R109
75.0
0603
22
SPORT_B_RX_DIN1
O_SDATA
R133
22
0603
51
VOUTL
49
VOUTR
31
IAUX_BCLK
AUX_CLK
R72
750
0805
30
IAUX_LRCLK
R55
22
0603
32
IAUX_SDATA
2
VINL
1
VINR
AUX_LRCLK
28
OAUX_BCLK
C72
2.2UF
0805
OAUX_LRCLK
29
AUX_DOUT1
OAUX_SDATA
13
ZEROL_INT
14
ZEROR
11
57
VREF
55
FILTD
64
CAPLN
63
CAPLP
60
CAPRN
61
CAPRP
CCLK
10
MOSI
CIN
12
MISO
COUT
9
CLATCH
ADAV801_SSEL
8
RESET
RESET
R130
22
0603
41
50
SYSCLK1
ADAV801_SYSCLK1
NC1
40
C40
1800PF
0805
C49
1800PF
0805
C44
.033UF
0603
C45
.033UF
0603
JP4
1
SPDIF_OUT
2
SPDIF_IN
IDC2X1
C55
0.1UF
0603
C52
10UF
0805
C58
0.1UF
0603
C61
10UF
0805
AVDD4
NC2
AGND2
39
SYSCLK3
7
DIR_VDD
6
DIR_GND
38
XIN
3
2
52
SYSCLK2
R131
22
0603
R48
732.0
0603
5
DIR_LF
45
PLL_LF1
46
PLL_LF2
AUX_DIN1
SCK
R47
732.0
0603
C73
.082UF
0805
27
ADAV801_SYSCLK3
2
21
20
2
J5
CON012
C116
0.01UF
0603
3
37
XOUT
TP5
43
PLL_VDD
44
PLL_GND
35
MCLKI
TP4
47
ADGND
62
AGND5
58
AGND4
56
AGND3
54
AGND2
3
AGND1
DGND3
DGND2
42
ADAV801ASTZ
LQFP64
33
C153
22PF
0805
16
FER8
600
0603
DGND1
MCLKO
C152
22PF
0805
ODGND
36
25
Y1
27MHZ
OSC011
AGND2
AGND2
3.3V
4
C171
0.1UF
0603
C158
10UF
0805
C164
0.1UF
0603
AVDD4
C179
0.1UF
0603
C186
10UF
0805
C172
10UF
0805
C184
0.1UF
0603
C161
10UF
0805
C163
0.1UF
0603
C167
10UF
0805
C169
0.1UF
0603
C174
10UF
0805
C170
0.1UF
0603
C175
10UF
0805
C183
0.1UF
0603
C182
10UF
0805
C162
0.1UF
0603
ANALOG
DEVICES
C185
10UF
0805
Title
Size
Date
A
B
C
Nashua, NH 03063
4
PH: 1-800-ANALOGD
BLACKFIN AUDIO EZ-EXTENDER
ADAV801 - DIGITAL AUDIO
Board No.
C
AGND2
20 Cotton Road
Rev
A0195-2005
1.2B
Sheet
4-24-2006_9:56
D
5
of
12
A
3.3V
B
C
D
A3V
3.3V
3.3V
FER1
600
0603
4SD
FER13
600
0603
R128
22
0603
2
12
D
5
Q
D
10SD
U9
U9
AVDD2
R27
22
0603
9
Q
8
6
3
CLK
FER4
600
0603
74LVC74A
TSSOP14
74LVC74A
TSSOP14
1
13
RD
AVDD3
1
RD
ADAV801_SYSCLK1
1
QN
11
CLK
QN
RESET
ADAV801_SYSCLK1_DIV4
JP2
1
2
ADAV801_SYSCLK1_DIV2
3
4
5
6
7
8
ADAV801_SYSCLK3
FER11
600
0603
AD1938_MCLK
IDC4X2
FER2
600
0603
AGND
3.3V
AVDD2
3.3V
A3V
AVDD3
AUX_LRCLK
AUX_DIN1
AUX_DOUT1
DVDD
A
MISO
AD1938_A_SSEL
17
18
AIN2_RN
15
AIN2_RP
OR1
AOUT2_L
31
OR2
AOUT3_L
7
OR3
AOUT4_L
MCLKO_XO
LF
CM
47
AD1938_A_LF
38
AUX_DOUT2
CCLK
CIN
COUT
CLATCH
2
MCLKI_XI
3
MCLKO_XO
TP3
AD1938_B_MCLK_0
10
RESET
C203
0.1UF
0603
AGND
C87
10UF
0805
C86
0.1UF
0603
AIN3_RN
AIN3_RP
AIN4_LN
AVDD3
AIN4_LP
AIN4_RN
AIN4_RP
AOUT5_L
R125
562.0
0603
AOUT5_R
AOUT6_L
C136
390PF
0603
AOUT6_R
AOUT7_L
C132
5600PF
0805
AOUT7_R
AOUT8_L
AOUT8_R
47
LF
38
CM
35
FILTR
RESET
AD1938XSTZ
LQFP48
AGND
AIN3_LP
28
OL1
29
OR1
30
OL2
31
OR2
6
OL3
7
OR3
8
OL4
9
OR4
AUX_DOUT1
AD1938_B_LF
3
AD1938_B_CM
C34
10UF
0805
36
AGND5
B
AIN3_LN
AUX_DIN2
4
AGND2
AUX_DIN1
32
AGND3
AUX_LRCLK
34
AGND4
AUX_CLK
1
AGND1
TDM_DOUT
AD1938_A_CM
C85
10UF
0805
36
4
32
34
1
AD1938XSTZ
LQFP48
TDM_DIN
AOUT4_R
35
FILTR
12
DGND1
25
DGND2
10
RESET
RESET
27
AD1938_B_SSEL
AD1938_MCLK
3
24
MISO
MCLKI_XI
TP7
23
MOSI
2
AD1938_MCLK
26
SCK
C187
5600PF
0805
AOUT3_R
8
11
C192
390PF
0603
AOUT2_R
6
OL4
R136
562.0
0603
AOUT1_R
30
OL3
19
AOUT1_L
29
9
AD1938_A_MCLK_0
20
AVDD2
AIN2_LP
OR4
3
SPORT_A_DIN2
TDM_FS
AIN2_LN
28
OL1
26
CCLK
23
CIN
24
COUT
27
CLATCH
MOSI
SPORT_A_DOUT2
AIN1_RP
16
14
OL2
SCK
AIN1_RN
22
40
ADC1LN
39
ADC1LP
42
ADC1RN
41
ADC1RP
44
ADC2LN
43
ADC2LP
46
ADC2RN
45
ADC2RP
AGND5
AUX_CLK
SPORT_A_FS
TDM_CLK
2
AGND2
17
AUX_CLK
18
AUX_LRCLK
15
AUX_DIN1
14
AUX_DIN2
19
AUX_DOUT1
11
AUX_DOUT2
AIN1_LP
21
AGND3
SPORT_A_DIN1
SPORT_A_CLK
AGND4
SPORT_A_DOUT1
AIN1_LN
AGND1
SPORT_A_FS
40
ADC1LN
39
ADC1LP
42
ADC1RN
41
ADC1RP
44
ADC2LN
43
ADC2LP
46
ADC2RN
45
ADC2RP
5
AVDD1
33
AVDD2
37
AVDD3
48
AVDD4
21
TDM_CLK
22
TDM_FS
16
TDM_DIN
20
TDM_DOUT
U7
12
DGND1
25
DGND2
DVDD
R142
22
0603
13
U18
SPORT_A_CLK
5
AVDD1
33
AVDD2
37
AVDD3
48
AVDD4
R143
22
0603
13
2
A3V
AGND
C150
0.1UF
0603
C35
10UF
0805
C31
0.1UF
0603
AGND
3.3V
3.3V
4
C190
0.1UF
0603
A3V
C194
0.1UF
0603
AVDD2
C191
0.1UF
0603
C199
0.1UF
0603
C200
0.1UF
0603
3.3V
C195
0.1UF
0603
C143
0.1UF
0603
A3V
C138
0.1UF
0603
C135
0.1UF
0603
AVDD3
C146
0.1UF
0603
C140
0.1UF
0603
C147
0.1UF
0603
ANALOG
DEVICES
C149
0.1UF
0603
Title
74LVC74
20 Cotton Road
Nashua, NH 03063
4
PH: 1-800-ANALOGD
BLACKFIN AUDIO EZ-EXTENDER
AD1938 - ANALOG AUDIO
AD1938 A
Size
AD1938 B
AGND
Date
A
B
Board No.
C
AGND
C
Rev
A0195-2005
1.2B
Sheet
4-24-2006_9:56
D
6
of
12
A
B
C
D
A5V_AMP
5V
A5V_AMP
THIS JUMPER ALLOWS FOR POWERING THE
OP-AMPS FROM AN EXTERNAL SUPPLY
WHEN A HIGHER PEAK TO PEAK INPUT OR
OUTPUT VOLTAGE IS REQUIRED
SEE MANUAL FOR MORE DETAILS
FER17
600
0603
DNP
FER16
600
0603
R153
10.0K
0603
JP3
1
2
IDC2X1
DNP
AIN_VREF
1
AGND
R82
DNP
0603
R81
0
0603
1
R154
10.0K
0603
CT1
47UF
B
C83
DNP
0603
C202
DNP
0603
AGND
AGND
J7
CON011
FER12
600
0603
2
IN1 LEFT
R155
28.0K
0603
2
C89
4.7UF
0603
U19
C201
4.7UF
0603
R84
237.0
0603
1
AIN1_L_CON
AIN1_LP
3
AD8608ARUZ
TSSOP14
3
C79
100PF
0603
R79
5.76K
0603
C91
1000PF
0603
R80
5.76K
0603
C204
100PF
0603
C82
120PF
0603
R140
24.9K
0603
AGND
AGND
13
C88
4.7UF
0603
U19
C90
1000PF
0603
R83
237.0
0603
14
AIN_VREF
2
AIN1_LN
12
2
AD8608ARUZ
TSSOP14
R124
22.6K
0603
SW1
1
ON
1
NOTE: WHEN SW1.1 OR SW1.2 ARE OFF, GAIN = (1/1.5)
WHEN SW1.1 OR SW1.2 ARE ON, GAIN = (1/2.12)
DEFAULT = OFF
3
2
2
4
SWT020
DIP2
R156
22.6K
0603
R78
DNP
0603
R77
0
0603
C81
DNP
0603
C198
DNP
0603
AGND
J7
CON011
3
FER14
600
0603
1
IN1 RIGHT
R157
28.0K
0603
6
C78
4.7UF
0603
U19
C196
4.7UF
0603
R74
237.0
0603
7
AIN1_R_CON
AIN1_RP
3
5
AD8608ARUZ
TSSOP14
3
C84
100PF
0603
R75
5.76K
0603
C75
1000PF
0603
R76
5.76K
0603
C193
100PF
0603
C80
120PF
0603
R138
24.9K
0603
AGND
AGND
9
C77
4.7UF
0603
U19
C74
1000PF
0603
R73
237.0
0603
8
AIN_VREF
AIN1_RN
10
AD8608ARUZ
TSSOP14
ANALOG INPUT SIGNAL SPECS CAN BE FOUND IN THE MANUAL
A5V_AMP
ANALOG
DEVICES
4
C197
0.1UF
0603
Title
Size
Date
A
B
C
Nashua, NH 03063
4
PH: 1-800-ANALOGD
BLACKFIN AUDIO EZ-EXTENDER
ANALOG IN 1
Board No.
C
AGND
20 Cotton Road
Rev
A0195-2005
1.2B
Sheet
4-24-2006_9:56
D
7
of
12
A
B
C
R69
DNP
0603
D
R68
0
0603
1
1
C66
DNP
0603
C181
DNP
0603
AGND
J7
CON011
FER9
600
0603
5
IN2 LEFT
R158
28.0K
0603
2
C69
4.7UF
0603
U15
C180
4.7UF
0603
R71
237.0
0603
1
AIN2_L_CON
AIN2_LP
3
AD8608ARUZ
TSSOP14
6
C64
100PF
0603
R66
5.76K
0603
C71
1000PF
0603
R67
5.76K
0603
C188
100PF
0603
C65
120PF
0603
R135
24.9K
0603
AGND
AGND
13
C68
4.7UF
0603
U15
C70
1000PF
0603
R70
237.0
0603
14
AIN_VREF
2
AIN2_LN
12
2
AD8608ARUZ
TSSOP14
R159
22.6K
0603
SW2
1
2
4
3
2
NOTE: WHEN SW2.1 OR SW2.2 ARE OFF, GAIN = (1/1.5)
WHEN SW2.1 OR SW2.2 ARE ON, GAIN = (1/2.12)
DEFAULT = OFF
ON
1
SWT020
DIP2
R160
22.6K
0603
R64
DNP
0603
R63
0
0603
C63
DNP
0603
C178
DNP
0603
AGND
J7
CON011
3
FER10
600
0603
4
IN2 RIGHT
R161
28.0K
0603
6
C60
4.7UF
0603
U15
C173
4.7UF
0603
R57
237.0
0603
7
AIN2_R_CON
AIN2_RP
3
5
AD8608ARUZ
TSSOP14
6
C67
100PF
0603
R61
5.76K
0603
C57
1000PF
0603
R62
5.76K
0603
C168
100PF
0603
C62
120PF
0603
R134
24.9K
0603
AGND
AGND
9
C59
4.7UF
0603
U15
C56
1000PF
0603
R56
237.0
0603
8
AIN_VREF
AIN2_RN
10
AD8608ARUZ
TSSOP14
ANALOG INPUT SIGNAL SPECS CAN BE FOUND IN THE MANUAL
A5V_AMP
ANALOG
DEVICES
4
C177
0.1UF
0603
Title
Size
Date
A
B
C
Nashua, NH 03063
4
PH: 1-800-ANALOGD
BLACKFIN AUDIO EZ-EXTENDER
ANALOG IN 2
Board No.
C
AGND
20 Cotton Road
Rev
A0195-2005
1.2B
Sheet
4-24-2006_9:56
D
8
of
12
A
B
C
R52
DNP
0603
D
R51
0
0603
1
1
C47
DNP
0603
C160
DNP
0603
AGND
J7
CON011
FER6
600
0603
8
IN3 LEFT
R162
28.0K
0603
2
C51
4.7UF
0603
U12
C159
4.7UF
0603
R54
237.0
0603
1
AIN3_L_CON
AIN3_LP
3
AD8608ARUZ
TSSOP14
9
C43
100PF
0603
R49
5.76K
0603
C54
1000PF
0603
R50
5.76K
0603
C166
100PF
0603
C46
120PF
0603
R132
24.9K
0603
AGND
AGND
13
C50
4.7UF
0603
U12
C53
1000PF
0603
R53
237.0
0603
14
AIN_VREF
2
AIN3_LN
12
2
AD8608ARUZ
TSSOP14
R163
22.6K
0603
SW3
1
2
4
3
2
NOTE: WHEN SW3.1 OR SW3.2 ARE OFF, GAIN = (1/1.5)
WHEN SW3.1 OR SW3.2 ARE ON, GAIN = (1/2.12)
DEFAULT = OFF
ON
1
SWT020
DIP2
R164
22.6K
0603
R46
DNP
0603
R45
0
0603
C42
DNP
0603
C156
DNP
0603
AGND
J7
CON011
3
FER7
600
0603
7
IN3 RIGHT
R165
28.0K
0603
6
C39
4.7UF
0603
U12
C155
4.7UF
0603
R42
237.0
0603
7
AIN3_R_CON
AIN3_RP
3
5
AD8608ARUZ
TSSOP14
9
C48
100PF
0603
R43
5.76K
0603
C37
1000PF
0603
R44
5.76K
0603
C151
100PF
0603
C41
120PF
0603
R129
24.9K
0603
AGND
AGND
9
C38
4.7UF
0603
U12
C36
1000PF
0603
R41
237.0
0603
8
AIN_VREF
AIN3_RN
10
AD8608ARUZ
TSSOP14
ANALOG INPUT SIGNAL SPECS CAN BE FOUND IN THE MANUAL
A5V_AMP
ANALOG
DEVICES
4
C157
0.1UF
0603
Title
Size
Date
A
B
C
Nashua, NH 03063
4
PH: 1-800-ANALOGD
BLACKFIN AUDIO EZ-EXTENDER
ANALOG IN 3
Board No.
C
AGND
20 Cotton Road
Rev
A0195-2005
1.2B
Sheet
4-24-2006_9:56
D
9
of
12
A
B
C
R37
DNP
0603
D
R36
0
0603
1
1
C27
DNP
0603
C145
DNP
0603
AGND
J7
CON011
FER3
600
0603
R166
28.0K
0603
2
C144
4.7UF
0603
R40
237.0
0603
1
11 AIN4_L_CON
IN4 LEFT
C29
4.7UF
0603
U8
AIN4_LP
3
AD8608ARUZ
TSSOP14
12
C25
100PF
0603
R34
5.76K
0603
C33
1000PF
0603
R35
5.76K
0603
C148
100PF
0603
C26
120PF
0603
R127
24.9K
0603
AGND
AGND
13
C28
4.7UF
0603
U8
C32
1000PF
0603
R39
237.0
0603
14
AIN_VREF
2
AIN4_LN
12
2
AD8608ARUZ
TSSOP14
R167
22.6K
0603
SW4
1
2
4
3
2
NOTE: WHEN SW4.1 OR SW4.2 ARE OFF, GAIN = (1/1.5)
WHEN SW4.1 OR SW4.2 ARE ON, GAIN = (1/2.12)
DEFAULT = OFF
ON
1
SWT020
DIP2
R168
22.6K
0603
R32
DNP
0603
R31
0
0603
C24
DNP
0603
C139
DNP
0603
AGND
J7
CON011
3
FER5
600
0603
R169
28.0K
0603
6
C137
4.7UF
0603
R26
237.0
0603
7
10 AIN4_R_CON
IN4 RIGHT
C21
4.7UF
0603
U8
AIN4_RP
3
5
AD8608ARUZ
TSSOP14
12
C30
100PF
0603
R29
5.76K
0603
C19
1000PF
0603
R30
5.76K
0603
C133
100PF
0603
C23
120PF
0603
R126
24.9K
0603
AGND
AGND
9
C20
4.7UF
0603
U8
C18
1000PF
0603
R25
237.0
0603
8
AIN_VREF
AIN4_RN
10
AD8608ARUZ
TSSOP14
ANALOG INPUT SIGNAL SPECS CAN BE FOUND IN THE MANUAL
A5V_AMP
ANALOG
DEVICES
4
C141
0.1UF
0603
Title
Size
Date
A
B
C
Nashua, NH 03063
4
PH: 1-800-ANALOGD
BLACKFIN AUDIO EZ-EXTENDER
ANALOG IN 4
Board No.
C
AGND
20 Cotton Road
Rev
A0195-2005
1.2B
Sheet
4-24-2006_9:56
D
10
of
12
A
B
C
C104
270PF
0603
C92
270PF
0603
R178
3.32K
0603
1
6
R97
4.99K
0603
D
R102
604.0
0603
U21
R93
4.99K
0603
C213
4.7UF
0603
2
7
AOUT1_L_CON
R85
4.99K
0603
2
5
AOUT1_L
C221
2200PF
0603
1
AD8608ARUZ
TSSOP14
R145
49.9K
0603
C96
220PF
0603
AGND
3
R179
4.99K
0603
C220
2200PF
0603
R144
49.9K
0603
AGND
C105
270PF
0603
R177
3.32K
0603
13
R104
604.0
0603
U21
R87
4.99K
0603
9
14
AOUT2_L
AOUT2_L_CON
R98
4.99K
0603
5
C97
220PF
0603
C223
2200PF
0603
J8
CON011
C214
4.7UF
0603
8
AOUT2_R_CON
4
10
AD8608ARUZ
TSSOP14
6
R181
4.99K
0603
R103
604.0
0603
U21
R94
4.99K
0603
AOUT2_R
AD8608ARUZ
TSSOP14
2
R172
3.32K
0603
J8
CON011
C215
4.7UF
0603
12
R147
49.9K
0603
C101
220PF
0603
AGND
6
R180
4.99K
0603
C222
2200PF
0603
R146
49.9K
0603
2
AGND
C106
270PF
0603
C94
270PF
0603
R176
3.32K
0603
13
R99
4.99K
0603
AOUT1_R_CON
1
3
C93
270PF
0603
R88
4.99K
0603
J8
CON011
C212
4.7UF
0603
1
3
R170
4.99K
0603
R101
604.0
0603
U21
R86
4.99K
0603
AOUT1_R
AD8608ARUZ
TSSOP14
C100
220PF
0603
R171
3.32K
0603
J8
CON011
R106
604.0
0603
U22
R95
4.99K
0603
9
14
AOUT3_L_CON
R89
4.99K
0603
8
12
AOUT3_L
C225
2200PF
0603
J8
CON011
C216
4.7UF
0603
8
AOUT3_R_CON
7
10
AD8608ARUZ
TSSOP14
9
R183
4.99K
0603
R105
604.0
0603
U22
R90
4.99K
0603
AOUT3_R
AD8608ARUZ
TSSOP14
C102
220PF
0603
R173
3.32K
0603
J8
CON011
C217
4.7UF
0603
R149
49.9K
0603
C98
220PF
0603
9
R182
4.99K
0603
C224
2200PF
0603
R148
49.9K
0603
3
3
AGND
AGND
C95
270PF
0603
C107
270PF
0603
R175
3.32K
0603
6
R92
4.99K
0603
R91
4.99K
0603
R108
604.0
0603
U22
C219
4.7UF
0603
2
7
AOUT4_L_CON
R100
4.99K
0603
11
5
AOUT4_L
C227
2200PF
0603
J8
CON011
C218
4.7UF
0603
1
AOUT4_R_CON
10
3
AD8608ARUZ
TSSOP14
12
R185
4.99K
0603
R107
604.0
0603
U22
R96
4.99K
0603
AOUT4_R
AD8608ARUZ
TSSOP14
C99
220PF
0603
R174
3.32K
0603
J8
CON011
R151
49.9K
0603
C103
220PF
0603
12
R184
4.99K
0603
C226
2200PF
0603
R150
49.9K
0603
ANALOG OUTPUT SIGNAL SPECS CAN BE FOUND IN THE MANUAL
AGND
A5V_AMP
AGND
A5V_AMP
ANALOG
DEVICES
4
C209
0.1UF
0603
C210
0.1UF
0603
Title
Size
AGND
Date
A
B
C
Nashua, NH 03063
4
PH: 1-800-ANALOGD
BLACKFIN AUDIO EZ-EXTENDER
ANALOG OUT 1
Board No.
C
AGND
20 Cotton Road
Rev
A0195-2005
1.2B
Sheet
4-24-2006_9:56
D
11
of
12
A
B
C
C4
270PF
0603
C17
270PF
0603
R186
3.32K
0603
1
6
R16
4.99K
0603
D
R7
604.0
0603
U5
R15
4.99K
0603
C123
4.7UF
0603
2
7
AOUT5_L_CON
R24
4.99K
0603
2
5
AOUT5_L
C114
2200PF
0603
1
AD8608ARUZ
TSSOP14
R117
49.9K
0603
C13
220PF
0603
AGND
3
R198
4.99K
0603
C115
2200PF
0603
R118
49.9K
0603
AGND
C3
270PF
0603
R193
3.32K
0603
13
R5
604.0
0603
U5
R19
4.99K
0603
9
14
AOUT6_L
AOUT6_L_CON
R13
4.99K
0603
5
C12
220PF
0603
C112
2200PF
0603
J4
CON011
C122
4.7UF
0603
8
AOUT6_R_CON
4
10
AD8608ARUZ
TSSOP14
6
R200
4.99K
0603
R6
604.0
0603
U5
R14
4.99K
0603
AOUT6_R
AD8608ARUZ
TSSOP14
2
R188
3.32K
0603
J4
CON011
C121
4.7UF
0603
12
R115
49.9K
0603
C7
220PF
0603
AGND
6
R197
4.99K
0603
C113
2200PF
0603
R116
49.9K
0603
2
AGND
C2
270PF
0603
C15
270PF
0603
R192
3.32K
0603
13
R12
4.99K
0603
AOUT5_R_CON
1
3
C16
270PF
0603
R23
4.99K
0603
J4
CON011
C124
4.7UF
0603
1
3
R199
4.99K
0603
R8
604.0
0603
U5
R20
4.99K
0603
AOUT5_R
AD8608ARUZ
TSSOP14
C8
220PF
0603
R187
3.32K
0603
J4
CON011
R3
604.0
0603
U4
R11
4.99K
0603
9
14
AOUT7_L_CON
R22
4.99K
0603
8
12
AOUT7_L
C110
2200PF
0603
J4
CON011
C120
4.7UF
0603
8
AOUT7_R_CON
7
10
AD8608ARUZ
TSSOP14
9
R201
4.99K
0603
R4
604.0
0603
U4
R18
4.99K
0603
AOUT7_R
AD8608ARUZ
TSSOP14
C6
220PF
0603
R189
3.32K
0603
J4
CON011
C119
4.7UF
0603
R113
49.9K
0603
C11
220PF
0603
9
R196
4.99K
0603
C111
2200PF
0603
R114
49.9K
0603
3
3
AGND
AGND
C14
270PF
0603
C1
270PF
0603
R191
3.32K
0603
6
R21
4.99K
0603
R17
4.99K
0603
R1
604.0
0603
U4
C117
4.7UF
0603
2
7
AOUT8_L_CON
R9
4.99K
0603
11
5
AOUT8_L
C108
2200PF
0603
J4
CON011
C118
4.7UF
0603
1
AOUT8_R_CON
10
3
AD8608ARUZ
TSSOP14
12
R194
4.99K
0603
R2
604.0
0603
U4
R10
4.99K
0603
AOUT8_R
AD8608ARUZ
TSSOP14
C10
220PF
0603
R190
3.32K
0603
J4
CON011
R111
49.9K
0603
C5
220PF
0603
12
R195
4.99K
0603
C109
2200PF
0603
R112
49.9K
0603
ANALOG OUTPUT SIGNAL SPECS CAN BE FOUND IN THE MANUAL
AGND
A5V_AMP
AGND
A5V_AMP
ANALOG
DEVICES
4
C129
0.1UF
0603
C128
0.1UF
0603
Title
Size
AGND
Date
A
B
C
Nashua, NH 03063
4
PH: 1-800-ANALOGD
BLACKFIN AUDIO EZ-EXTENDER
ANALOG OUT 2
Board No.
C
AGND
20 Cotton Road
Rev
A0195-2005
1.2B
Sheet
4-24-2006_9:56
D
12
of
12
I
INDEX
A
AD1938 analog audio codecs, -viii, 1-2, 1-4,
2-2, 2-6, 2-7
MCLK source jumper (JP2), 2-6
ADAV801 dual analog/digital audio codecs,
-viii, 1-3, 1-4, 2-2
ADSP-BF537 EZ-KIT Lite select jumper
(JP1.1/2), 2-5
analog
audio data streams, 1-3, 2-2
audio interface, -viii, 1-2, 2-2
input gain switches (SW1-4), 2-7
input/output pins, 1-4
stereo input/output, 1-4
analog-to-digital converters (ADCs), 1-2
architecture, of this Audio EZ-Extender, 2-2
audio interfaces, See analog audio interface,
digital audio interface
auxiliary serial ports, 1-3, 1-4
B
bill of materials, A-1
board
layout, 2-2
schematic, B-1
configuration, of this Audio EZ-Extender, 1-1
connectors, locations of, 2-2
customer support, -x
D
digital
audio data steams, 2-2
audio interface, -viii, 1-4, 2-2
input channels, 1-3
stereo input/output, 1-4
digital-to-analog converters (DACs), 1-2
E
expansion interface, of EZ-KIT Lite, -vii
external
clocks, 1-4
master clock (MCLK) signal, 1-3
oscillators, 1-4
EZ-KIT Lites
SPORT0 enable jumper (JP1.3/4), 2-6
SPORT1 enable jumper (JP1.5/6), 2-6
F
frame sync signals, 1-3, 2-2
C
I
clock
frequencies, 1-3, 2-6
signals, 1-3, 2-2
I2S mode, 1-4, 2-2
input/output digital streams, 1-3
Blackfin Audio EZ-Extender Manual
I-1
INDEX
interfaces
analog audio, -viii
analog audio interface, 1-2
digital audio, -viii, 1-4
internal clocks, 1-4
J
jumpers
locations of, 2-2, 2-5
JP1.1/2 jumper (ADSP-BF537 EZ-KIT Lite
select), 2-5
JP1.3/4 (EZ-KIT Lite SPORT0 enable), 2-6
JP1.5/6 (EZ-KIT Lite SPORT1 enable), 2-6
JP1.7/8 (SPORT select), 2-6
JP2 (MCLK source), 1-3, 2-6
JP4 (SPDIF loopback), 2-7
M
master clock (MCLK), 2-6
MCLK source jumper (JP2), 2-6
multibit sigma-delta architecture, 1-2
N
R
RCA jacks, -viii, 1-4
S
sample rates, 1-2, 1-4, 2-2, 2-6
schematic, B-1
secondary serilal port, 1-5
serial peripheral interface (SPI), 1-2, 1-4, 2-4
select signals, 2-5
serial ports (SPORTs), 1-2, 1-3, 2-2
select jumper (JP1.7/8), 2-6
setup, of this Audio EZ-Extender, 1-1
Sony Philips Digital Interface, See SPDIF
SPDIF
input/output, 1-5
loopback jumper (JP4), 2-7
transceiver, -viii
SPORT0 signals, 2-6
SPORT1 signals, 2-6
supported EZ-KIT Lites, -xi
SW1-4 (analog input gain) switches, 2-7
SYSCLK1 pin, 1-3, 2-6
SYSCLK3 pin, 1-3, 1-5, 2-6
system architecture, 2-2
notation conventions, -xiii
T
P
phase-locked loop (PLL), 1-3, 1-4
primary serial port, 1-5
product overview, -vii
I-2
time-division multiplexed (TDM) mode, 1-2,
2-2
TX/RX pins, 2-2
Blackfin Audio EZ-Extender Manual