Analog Devices Welcomes Hittite Microwave Corporation www.analog.com www.hittite.com

advertisement
Analog Devices Welcomes
Hittite Microwave Corporation
NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
www.analog.com
www.hittite.com
THIS PAGE INTENTIONALLY LEFT BLANK
HMC604LP3 / 604LP3E
v00.0308
Amplifiers - Low Noise - SMT
7
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER w/ BYPASS MODE, 4.8 - 6.0 GHz
Typical Applications
Features
The HMC604LP3 / HMC604LP3E is ideal for:
Noise Figure: 1.5 dB
• WiMAX/C-band Radio
Output IP3: +26 dBm
• Fixed Wireless
Gain: 15 dB
• Tower Mounted Amplifiers
Integrated Low Loss LNA Bypass Path
• Public Safety Infrastructure
Single Supply: +3V or +5V
• Telematics & DSRC
50 Ohm Matched Output/Input
16 Lead 3x3mm QFN Package: 9 mm2
Functional Diagram
General Description
The HMC604LP3(E) is a versatile, high dynamic
range GaAs MMIC Low Noise Amplifier that integrates
a low loss LNA bypass mode on the IC. The amplifier
is ideal for WiMAX & C-band Radio receivers
operating between 4.8 and 6.0 GHz and provides
1.5 dB noise figure, 15 dB of gain and +26 dBm IP3
from a single supply of +5V @ 42mA. Input and output
return losses are 12 and 14 dB respectively with no
external matching components required. A single
control line (0/Vdd) is used to switch between LNA
mode and a low loss bypass mode which reduces the
current consumption to 10 µA.
Electrical Specifications, TA = +25° C
Vdd = +3V
Parameter
LNA Mode
Min.
Typ.
Frequency Range
Gain
Bypass Mode
Max.
Min.
Typ.
Max.
LNA Mode
Min.
Typ.
Bypass Mode
Max.
4.8 - 6.0
10
Gain Variation Over Temperature
Vdd = +5V
12.5
-3
0.026
2.1
Min.
Typ.
4.8 - 6.0
-2
13
15
0.002
0.026
-3
2
Max.
Units
GHz
-2
dB
0.002
dB / °C
Noise Figure
1.6
2
1.5
2
dB
Input Return Loss
14
20
12
20
dB
Output Return Loss
15
20
14
20
dB
Reverse Isolation
28
-
30
-
dB
Power for 1dB Compression (P1dB)*
10
24
14
24
dBm
Saturated Output Power (Psat)
10.5
25
14.5
25
dBm
Third Order Intercept (IP3)*
(-20 dBm Input Power per tone,
1 MHz tone spacing)
21
23
26
23
dBm
Supply Current (Idd)
17
0.01
42
0.01
mA
Switching
Speed
LNA Mode to Bypass Mode
Bypass Mode to LNA Mode
25
7
55
6
50
ns
150
ns
* P1dB and IP3 for LNA Mode are referenced to RFOUT while P1dB for Bypass Mode is referenced to RFIN.
7-1
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC604LP3 / 604LP3E
v00.0308
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER w/ BYPASS MODE, 4.8 - 6.0 GHz
20
10
10
S21
S11
S22
0
-10
-20
S21
S11
S22
0
-10
-20
4.5
5.0
5.5
6.0
6.5
-30
4.0
7.0
4.5
5.0
FREQUENCY (GHz)
LNA Gain vs. Temperature
NOISE FIGURE (dB)
2
GAIN (dB)
15
14
13
12
+25C
+85C
-40C
Vdd = 3V
4.8
5
5.2
5.4
5.6
T=+25C
1.5
T=-40C
1
Vdd=3V
Vdd=5V
0.5
5.8
0
4.6
6
4.8
5
5.2
5.4
5.6
5.8
6
FREQUENCY (GHz)
FREQUENCY (GHz)
LNA Gain vs. Vdd
LNA Noise Figure vs. Vdd
16
2
NOISE FIGURE (dB)
15
14
GAIN (dB)
7.0
T=+85C
16
13
12
11
2.7V
3.0V
3.3V
10
9
4.6
6.5
2.5
Vdd = 5V
10
4.6
6.0
LNA Noise Figure vs. Temperature
17
11
5.5
FREQUENCY (GHz)
Amplifiers - Low Noise - SMT
20
-30
4.0
7
LNA Broadband Gain
& Return Loss @ Vdd= 5V
RESPONSE (dB)
RESPONSE (dB)
LNA Broadband Gain
& Return Loss @ Vdd= 3V
4.8
5
5.2
4.5V
5.0V
5.5V
5.4
FREQUENCY (GHz)
5.6
5.8
6
2.7V
3.0V
3.3V
1.8
4.5V
5.0V
5.5V
1.6
1.4
1.2
4.6
4.8
5
5.2
5.4
5.6
5.8
6
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
7-2
HMC604LP3 / 604LP3E
v00.0308
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER w/ BYPASS MODE, 4.8 - 6.0 GHz
LNA Input Return Loss
vs. Temperature @ Vdd= 5V
0
0
-5
-5
RETURN LOSS (dB)
RETURN LOSS (dB)
LNA Input Return Loss
vs. Temperature @ Vdd= 3V
-10
-15
+25C
+85C
-40C
-20
-25
-30
4.6
-10
-15
-20
+25C
+85C
-40C
-25
4.8
5
5.2
5.4
5.6
5.8
-30
4.6
6
4.8
5
5.4
FREQUENCY (GHz)
LNA Output Return Loss
vs. Temperature @ Vdd= 3V
LNA Output Return Loss
vs. Temperature @ Vdd= 5V
0
-5
-5
RETURN LOSS (dB)
0
-10
-15
+25C
+85C
-40C
-20
-25
-30
4.6
4.8
5
5.2
5.4
5.6
5.8
5.6
5.8
6
+25C
+85C
-40C
-20
4.8
5
5.2
5.4
FREQUENCY (GHz)
LNA Output IP3 vs. Vdd
30
28
28
26
Vdd = 5V
26
24
IP3 (dBm)
IP3 (dBm)
6
-15
-30
4.6
6
30
24
22
22
20
18
20
16
4.6
5.8
-25
LNA Output IP3 vs. Temperature
18
5.6
-10
FREQUENCY (GHz)
4.8
5
16
+25 C
+85 C
-40 C
Vdd = 3V
5.2
5.4
FREQUENCY (GHz)
7-3
5.2
FREQUENCY (GHz)
RETURN LOSS (dB)
Amplifiers - Low Noise - SMT
7
5.6
5.8
2.7V
3.0V
3.3V
14
6
12
4.6
4.8
5
5.2
4.5V
5.0V
5.5V
5.4
5.6
5.8
6
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC604LP3 / 604LP3E
v00.0308
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER w/ BYPASS MODE, 4.8 - 6.0 GHz
LNA Psat vs. Temperature
18
Vdd = 5V
16
14
14
12
12
Psat (dBm)
Psat (dBm)
16
10
8
6
4
4
2
0
4.6
8
6
+25 C
+85 C
-40 C
Vdd = 3V
10
2.7V
3.0V
3.3V
2
4.8
5
5.2
5.4
5.6
5.8
0
4.6
6
4.8
5
FREQUENCY (GHz)
5.8
6
18
Vdd = 5V
16
14
12
12
P1dB (dBm)
14
10
8
6
+25 C
+85 C
-40 C
Vdd = 3V
4
10
8
6
4
2
2.7V
3.0V
3.3V
2
4.8
5
5.2
5.4
5.6
5.8
0
4.6
6
4.8
5
FREQUENCY (GHz)
5.2
4.5V
5.0V
5.5V
5.4
5.6
5.8
6
FREQUENCY (GHz)
LNA Reverse Isolation vs. Temperature
-25
Vdd = 3V
-30
ISOLATION (dB)
P1dB (dBm)
5.6
LNA Output P1dB vs. Vdd
18
0
4.6
5.4
FREQUENCY (GHz)
LNA Output P1dB vs. Temperature
16
5.2
4.5V
5.0V
5.5V
Amplifiers - Low Noise - SMT
18
7
LNA Psat vs. Vdd
-35
Vdd = 5V
-40
+25 C
+85 C
-40 C
-45
-50
4.6
4.8
5
5.2
5.4
5.6
5.8
6
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
7-4
HMC604LP3 / 604LP3E
v00.0308
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER w/ BYPASS MODE, 4.8 - 6.0 GHz
0
-5
-5
-10
RESPONSE (dB)
RESPONSE (dB)
0
S21
S11
S22
-15
-20
-25
-30
-35
4.0
-10
S21
S11
S22
-15
-20
-25
-30
4.5
5.0
5.5
6.0
6.5
-35
4.0
7.0
4.5
5.0
FREQUENCY (GHz)
-0.5
-0.5
INSERTION LOSS (dB)
0
-1
-1.5
-2
-2.5
-4
4.6
+25C
+85C
-40C
4.8
5
5.2
FREQUENCY (GHz)
[1] Vdd = 3V
6.5
7.0
-1
-1.5
-2
-2.5
-3
+25C
+85C
-40C
-3.5
5.4
6.0
Bypass Mode
Insertion Loss vs. Temperature [2]
0
-3
5.5
FREQUENCY (GHz)
Bypass Mode
Insertion Loss vs. Temperature [1]
-3.5
7-5
Bypass Mode
Broadband Gain & Return Loss [2]
Bypass Mode
Broadband Gain & Return Loss [1]
INSERTION LOSS (dB)
Amplifiers - Low Noise - SMT
7
5.6
5.8
6
-4
4.6
4.8
5
5.2
5.4
5.6
5.8
6
FREQUENCY (GHz)
[2] Vdd = 5V
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC604LP3 / 604LP3E
v00.0308
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER w/ BYPASS MODE, 4.8 - 6.0 GHz
0
0
-5
-5
+25C
+85C
-40C
-10
-15
-20
-25
-30
4.6
+25C
+85C
-40C
-10
-15
-20
-25
4.8
5
5.2
5.4
5.6
5.8
-30
4.6
6
4.8
5
5.2
FREQUENCY (GHz)
Bypass Mode
Output IP3 vs. Temperature [1]
5.6
5.8
6
5.8
6
Bypass Mode
Output P1dB vs. Temperature [1]
30
30
28
+25C
+85C
-40C
+25C
+85C
-40C
28
P1dB (dBm)
26
IP3 (dBm)
5.4
FREQUENCY (GHz)
24
22
26
24
7
Amplifiers - Low Noise - SMT
Bypass Mode
Output Return Loss vs. Temperature [1]
RETURN LOSS (dB)
RETURN LOSS (dB)
Bypass Mode
Input Return Loss vs. Temperature [1]
20
22
18
16
4.6
4.8
5
5.2
5.4
5.6
5.8
20
4.6
6
4.8
5
5.2
5.4
5.6
FREQUENCY (GHz)
FREQUENCY (GHz)
Bypass Mode
Psat vs. Temperature [1]
30
Psat (dBm)
28
26
24
+25C
+85C
-40C
22
20
4.6
4.8
5
5.2
5.4
5.6
5.8
6
FREQUENCY (GHz)
[1] Vdd = 3V or Vdd = 5V
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
7-6
HMC604LP3 / 604LP3E
v00.0308
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER w/ BYPASS MODE, 4.8 - 6.0 GHz
Amplifiers - Low Noise - SMT
7
7-7
Absolute Maximum Ratings
Drain Bias Voltage (Vdd)
RF Input Power (RFIN)
(Vdd = +5.0 Vdc)
+8 Vdc
LNA Mode +15 dBm
Bypass Mode +30 dBm
Channel Temperature
150 °C
Continuous Pdiss (T = 85 °C)
(derate 13 mW/°C above 85 °C)
850 mW
Thermal Resistance
(channel to ground paddle)
76.9 °C/W
Storage Temperature
-65 to +150° C
Operating Temperature
-40 to +85° C
Typical Supply Current vs. Vdd
Vdd (Vdc)
Idd (mA)
+2.7
13
+3.0
17
+3.3
21
+4.5
37
+5.0
42
+5.5
46
Truth Table
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
LNA Mode
Vctl= Vdd
Bypass Mode
Vctl= 0V
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC604LP3 / 604LP3E
v00.0308
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER w/ BYPASS MODE, 4.8 - 6.0 GHz
7
Amplifiers - Low Noise - SMT
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC604LP3
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
[1]
HMC604LP3E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
[2]
Package Marking [3]
604
XXXX
604
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
7-8
HMC604LP3 / 604LP3E
v00.0308
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER w/ BYPASS MODE, 4.8 - 6.0 GHz
Amplifiers - Low Noise - SMT
7
Pin Descriptions
Pin Number
Function
Description
1, 2, 5,
6, 8, 12
N/C
No connection necessary.
These pins may be connected to RF/DC ground.
3
RFIN
This pin is AC coupled
and matched to 50 Ohms.
4, 7, 9,
11, 15
GND
These pins must be connected to RF/DC ground.
10
RFOUT
This pin is AC coupled
and matched to 50 Ohms.
14
Vdd
Power supply voltage. Bypass capacitors
are required. See application circuit.
16
Vctl
LNA/Bypass Mode Control Voltage. See truth table.
Interface Schematic
Application Circuit
7-9
Components
Value
C1, C2
100pF
C3
10KpF
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC604LP3 / 604LP3E
v00.0308
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER w/ BYPASS MODE, 4.8 - 6.0 GHz
7
Amplifiers - Low Noise - SMT
Evaluation PCB
List of Materials for Evaluation PCB 117160 [1]
Item
Description
J1 - J2
PCB Mount SMA RF Connector
J3 - J6
DC Pin
C1, C2
100 pF Capacitor, 0402 Pkg.
C3
10 KpF Capacitor, 0402 Pkg.
U1
HMC604LP3 / HMC604LP3E Amplifier
PCB [2]
117158 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from
Hittite upon request.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
7 - 10
Download