50 MHz to 4.0 GHz RF/IF Gain Block ADL5602

advertisement
50 MHz to 4.0 GHz
RF/IF Gain Block
ADL5602
Data Sheet
FEATURES
FUNCTIONAL BLOCK DIAGRAM
GND
Fixed gain of 20 dB
Operation from 50 MHz to 4.0 GHz
Highest dynamic range gain block
Input/output internally matched to 50 Ω
Integrated bias control circuit
OIP3 of 42.0 dBm at 2.0 GHz
P1dB of 19.3 dBm at 2.0 GHz
Noise figure of 3.3 dB at 2.0 GHz
Single 5 V power supply
Low quiescent current of 89 mA
Thermally efficient SOT-89 package
ESD rating of ±1.5 kV (Class 1C)
(2)
ADL5602
1
2
3
RFIN
GND
RFOUT
08190-001
BIAS
Figure 1.
GENERAL DESCRIPTION
The ADL5602 is a broadband 20 dB linear amplifier that operates
at frequencies up to 4 GHz. The device can be used in a wide
variety of cellular, CATV, military, and instrumentation equipment.
The ADL5602 is fabricated on an InGaP HBT process and has
an ESD rating of ±1.5 kV (Class 1C). The device is available in a
thermally efficient SOT-89 package.
The ADL5602 provides the highest dynamic range available
from an internally matched gain block. This is accomplished
by providing extremely low noise figures and very high OIP3
specifications simultaneously, across the entire 4 GHz
frequency range.
The ADL5602 consumes 89 mA on a single 5 V supply and is
fully specified for operation from −40°C to +85°C.
A fully populated RoHS-compliant evaluation board is available.
The ADL5602 provides a gain of 20 dB, which is stable over
frequency, temperature, power supply, and from device to
device. The device is internally matched to 50 Ω at the input
and output, making the ADL5602 very easy to implement in a
wide variety of applications. Only input/output ac coupling
capacitors, power supply decoupling capacitors, and an external
inductor are required for operation.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2009–2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
ADL5602
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Basic Connections .......................................................................... 12
Functional Block Diagram .............................................................. 1
General Description ......................................................................... 1
Soldering Information and Recommended
PCB Land Pattern ....................................................................... 12
Revision History ............................................................................... 2
W-CDMA ACPR Performance .................................................... 13
Specifications..................................................................................... 3
Evaluation Board ............................................................................ 14
Typical Scattering Parameters (S Parameters) .......................... 5
Outline Dimensions ....................................................................... 15
Absolute Maximum Ratings............................................................ 7
Ordering Guide .......................................................................... 15
ESD Caution .................................................................................. 7
Pin Configuration and Function Descriptions ............................. 8
Typical Performance Characteristics ............................................. 9
REVISION HISTORY
11/13—Rev. 0 to Rev. A
Changes to Figure 2 ........................................................................... 8
Added Figure 15, Renumbered Sequentially ...............................11
Changes to Figure 17 .......................................................................12
Updated Outline Dimensions ........................................................15
6/09—Revision 0: Initial Version
Rev. A | Page 2 of 16
Data Sheet
ADL5602
SPECIFICATIONS
VCC = 5 V and TA = 25°C, unless otherwise noted.
Table 1.
Parameter
OVERALL FUNCTION
Frequency Range
FREQUENCY = 50 MHz
Gain
Output 1 dB Compression Point (P1dB)
Output Third-Order Intercept (OIP3)
Second Harmonic
Third Harmonic
Noise Figure
FREQUENCY = 140 MHz
Gain
vs. Frequency
vs. Temperature
vs. Supply Voltage
Output 1 dB Compression Point (P1dB)
Output Third-Order Intercept (OIP3)
Second Harmonic
Third Harmonic
Noise Figure
FREQUENCY = 350 MHz
Gain
vs. Frequency
vs. Temperature
vs. Supply Voltage
Output 1 dB Compression Point (P1dB)
Output Third-Order Intercept (OIP3)
Second Harmonic
Third Harmonic
Noise Figure
FREQUENCY = 700 MHz
Gain
vs. Frequency
vs. Temperature
vs. Supply Voltage
Output 1 dB Compression Point (P1dB)
Output Third-Order Intercept (OIP3)
Second Harmonic
Third Harmonic
Noise Figure
Conditions
Min
Typ
50
Δf = 1 MHz, output power (POUT) = 0 dBm per tone
POUT = 0 dBm
POUT = 0 dBm
±50 MHz
−40°C ≤ TA ≤ +85°C
4.75 V to 5.25 V
Δf = 1 MHz, output power (POUT) = 0 dBm per tone
POUT = 0 dBm
POUT = 0 dBm
±50 MHz
−40°C ≤ TA ≤ +85°C
4.75 V to 5.25 V
Δf = 1 MHz, output power (POUT) = 0 dBm per tone
POUT = 0 dBm
POUT = 0 dBm
19.0
±50 MHz
−40°C ≤ TA ≤ +85°C
4.75 V to 5.25 V
19.0
Δf = 1 MHz, output power (POUT) = 0 dBm per tone
POUT = 0 dBm
POUT = 0 dBm
Rev. A | Page 3 of 16
Max
Unit
4000
MHz
18.3
18.0
27.5
−40.5
−46.1
2.9
dB
dBm
dBm
dBc
dBc
dB
17.0
±1.2
±0.03
±0.04
18.3
25.0
−45.1
−55.1
2.9
dB
dB
dB
dB
dBm
dBm
dBc
dBc
dB
19.7
±0.20
±0.31
±0.01
20.0
36.5
−49.9
−83.7
3.0
dB
dB
dB
dB
dBm
dBm
dBc
dBc
dB
20.2
±0.01
±0.28
±0.01
20.1
38.5
−50.3
−78.4
3.0
21.0
dB
dB
dB
dB
dBm
dBm
dBc
dBc
dB
ADL5602
Parameter
FREQUENCY = 900 MHz
Gain
vs. Frequency
vs. Temperature
vs. Supply Voltage
Output 1 dB Compression Point (P1dB)
Output Third-Order Intercept (OIP3)
Second Harmonic
Third Harmonic
Noise Figure
FREQUENCY = 2000 MHz
Gain
vs. Frequency
vs. Temperature
vs. Supply Voltage
Output 1 dB Compression Point (P1dB)
Output Third-Order Intercept (OIP3)
Second Harmonic
Third Harmonic
Noise Figure
FREQUENCY = 2600 MHz
Gain
vs. Frequency
vs. Temperature
vs. Supply Voltage
Output 1 dB Compression Point (P1dB)
Output Third-Order Intercept (OIP3)
Second Harmonic
Third Harmonic
Noise Figure
FREQUENCY = 3500 MHz
Gain
vs. Frequency
vs. Temperature
vs. Supply Voltage
Output 1 dB Compression Point (P1dB)
Output Third-Order Intercept (OIP3)
Second Harmonic
Third Harmonic
Noise Figure
FREQUENCY = 4000 MHz
Gain
vs. Frequency
vs. Temperature
vs. Supply Voltage
Output 1 dB Compression Point (P1dB)
Output Third-Order Intercept (OIP3)
Second Harmonic
Third Harmonic
Noise Figure
Data Sheet
Conditions
Min
Typ
Max
Unit
19.0
20.2
±0.01
±0.28
±0.01
20.1
40.0
−59.4
−77.3
2.9
21.0
dB
dB
dB
dB
dBm
dBm
dBc
dBc
dB
±50 MHz
−40°C ≤ TA ≤ +85°C
4.75 V to 5.25 V
19.0
Δf = 1 MHz, output power (POUT) = 0 dBm per tone
POUT = 0 dBm
POUT = 0 dBm
±50 MHz
−40°C ≤ TA ≤ +85°C
4.75 V to 5.25 V
Δf = 1 MHz, output power (POUT) = 0 dBm per tone
POUT = 0 dBm
POUT = 0 dBm
±50 MHz
−40°C ≤ TA ≤ +85°C
4.75 V to 5.25 V
Δf = 1 MHz, output power (POUT) = 0 dBm per tone
POUT = 0 dBm
POUT = 0 dBm
±50 MHz
−40°C ≤ TA ≤ +85°C
4.75 V to 5.25 V
Δf = 1 MHz, output power (POUT) = 0 dBm per tone
POUT = 0 dBm
POUT = 0 dBm
±50 MHz
−40°C ≤ TA ≤ +85°C
4.75 V to 5.25 V
Δf = 1 MHz, output power (POUT) = 0 dBm per tone
POUT = 0 dBm
POUT = 0 dBm
Rev. A | Page 4 of 16
19.5
±0.04
±0.35
±0.04
19.3
42.0
−53.1
−60.7
3.3
dB
dB
dB
dB
dBm
dBm
dBc
dBc
dB
19.2
±0.01
±0.28
±0.05
18.7
36.5
−52.8
−67.4
3.4
dB
dB
dB
dB
dBm
dBm
dBc
dBc
dB
19.3
±0.03
±0.37
±0.07
17.4
31.5
−42.9
−66.4
3.8
dB
dB
dB
dB
dBm
dBm
dBc
dBc
dB
18.5
±0.19
±0.73
±0.08
15.2
28.0
−44.1
−64.0
4.2
dB
dB
dB
dB
dBm
dBm
dBc
dBc
dB
Data Sheet
ADL5602
Parameter
POWER INTERFACE
Supply Voltage (VCC)
Supply Current
vs. Temperature
Power Dissipation
Conditions
VCC
Min
Typ
Max
Unit
4.5
5
89
±3
0.45
5.5
106
V
mA
mA
W
−40°C ≤ TA ≤ +85°C
VCC = 5 V
TYPICAL SCATTERING PARAMETERS (S PARAMETERS)
VCC = 5 V and TA = 25°C, the effects of the test fixture have been de-embedded up to the pins of the device.
Table 2.
Frequency
(MHz)
50
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
1550
1600
1650
1700
1750
1800
1850
1900
1950
S11
Magnitude (dB)
−12.75
−8.98
−10.11
−11.97
−13.85
−15.69
−17.40
−19.17
−20.86
−22.52
−24.32
−26.07
−27.89
−30.79
−34.53
−42.59
−46.49
−34.26
−29.55
−25.87
−23.03
−21.25
−19.31
−17.72
−16.13
−14.81
−13.65
−12.68
−11.72
−10.92
−10.21
−9.58
−9.05
−8.52
−8.13
−7.76
−7.46
−7.19
−6.98
Angle (°)
+32.81
−7.00
−34.04
−50.46
−62.42
−72.90
−81.30
−88.48
−97.45
−107.32
−112.89
−120.03
−128.79
−133.19
−136.03
−130.76
−2.93
+15.99
+9.83
+5.52
+1.85
+0.10
−1.89
−4.09
−6.53
−8.71
−10.01
−11.33
−12.65
−13.56
−14.37
−15.37
−15.74
−16.73
−17.13
−17.59
−17.76
−17.92
−17.84
S21
Magnitude (dB)
18.14
15.77
17.27
18.50
19.21
19.64
19.90
20.07
20.18
20.25
20.32
20.35
20.39
20.42
20.42
20.46
20.47
20.47
20.48
20.48
20.47
20.45
20.45
20.40
20.35
20.31
20.24
20.18
20.11
20.04
19.97
19.88
19.80
19.72
19.64
19.57
19.50
19.43
19.39
Angle (°)
+163.00
−179.92
−169.01
−168.73
−171.01
−173.77
−176.45
−178.86
+178.79
+176.86
+174.84
+173.09
+171.35
+169.67
+167.93
+166.48
+164.85
+163.17
+161.77
+160.25
+158.65
+157.18
+155.50
+153.93
+152.44
+150.88
+149.35
+147.91
+146.40
+145.13
+143.86
+142.58
+141.40
+140.23
+139.13
+138.12
+137.16
+136.25
+135.31
Rev. A | Page 5 of 16
S12
Magnitude (dB)
−25.27
−27.59
−26.11
−24.84
−24.14
−23.70
−23.43
−23.26
−23.14
−23.08
−23.00
−22.97
−22.93
−22.91
−22.91
−22.88
−22.88
−22.86
−22.86
−22.86
−22.89
−22.90
−22.92
−22.96
−23.04
−23.07
−23.16
−23.22
−23.32
−23.39
−23.49
−23.57
−23.69
−23.76
−23.87
−23.94
−24.05
−24.13
−24.18
Angle (°)
−9.54
+4.56
+16.05
+16.55
+14.79
+12.89
+11.02
+9.65
+8.07
+7.11
+6.15
+5.24
+4.35
+3.72
+2.93
+2.30
+1.67
+0.98
+0.39
−0.21
−0.84
−1.43
−2.06
−2.72
−3.38
−4.04
−4.60
−5.06
−5.76
−6.16
−6.54
−6.93
−7.16
−7.45
−7.60
−7.80
−7.88
−7.91
−7.94
S22
Magnitude (dB)
−8.96
−7.07
−7.89
−9.33
−10.87
−12.23
−13.56
−14.79
−15.99
−17.02
−18.21
−19.45
−20.73
−22.22
−23.91
−26.35
−29.40
−34.27
−40.86
−31.44
−26.19
−23.27
−20.70
−18.67
−16.92
−15.44
−14.14
−13.12
−12.04
−11.20
−10.49
−9.77
−9.21
−8.66
−8.26
−7.91
−7.56
−7.35
−7.13
Angle (°)
−145.86
−178.96
+159.89
+147.22
+140.02
+136.16
+134.03
+132.79
+132.72
+133.33
+133.04
+135.06
+136.29
+136.96
+135.39
+136.07
+132.08
+116.48
+41.72
−10.36
−18.99
−22.34
−22.26
−24.44
−24.75
−25.79
−25.36
−25.73
−25.59
−25.40
−25.60
−25.59
−25.31
−25.42
−25.32
−24.96
−24.77
−24.46
−23.92
ADL5602
Frequency
(MHz)
2000
2050
2100
2150
2200
2250
2300
2350
2400
2450
2500
2550
2600
2650
2700
2750
2800
2850
2900
2950
3000
3050
3100
3150
3200
3250
3300
3350
3400
3450
3500
3550
3600
3650
3700
3750
3800
3850
3900
3950
4000
Data Sheet
S11
Magnitude (dB)
−6.85
−6.74
−6.63
−6.66
−6.65
−6.69
−6.77
−6.87
−7.05
−7.22
−7.45
−7.64
−7.95
−8.29
−8.62
−8.95
−9.31
−9.67
−9.99
−10.28
−10.53
−10.69
−10.86
−10.91
−10.70
−10.57
−10.38
−9.92
−9.48
−8.98
−8.44
−7.92
−7.34
−6.79
−6.29
−5.82
−5.37
−4.93
−4.56
−4.23
−3.97
Angle (°)
−18.00
−17.93
−17.57
−17.34
−17.26
−17.10
−16.90
−16.65
−16.25
−16.11
−16.00
−15.84
−15.66
−15.64
−15.95
−15.92
−16.23
−16.74
−17.33
−18.00
−19.16
−20.29
−21.94
−23.61
−25.42
−27.33
−29.60
−31.76
−34.25
−36.47
−38.18
−40.32
−42.20
−43.72
−45.15
−46.51
−47.51
−48.36
−48.94
−49.33
−49.71
S21
Magnitude (dB)
19.35
19.31
19.29
19.25
19.29
19.30
19.33
19.36
19.42
19.49
19.53
19.58
19.66
19.74
19.81
19.89
19.94
20.03
20.07
20.14
20.18
20.21
20.25
20.27
20.28
20.28
20.26
20.21
20.15
20.08
20.00
19.90
19.74
19.57
19.41
19.23
19.00
18.78
18.55
18.32
18.08
Angle (°)
+134.44
+133.61
+132.74
+132.06
+131.19
+130.47
+129.54
+128.72
+127.81
+126.89
+125.82
+124.74
+123.61
+122.46
+121.20
+119.91
+118.47
+117.02
+115.47
+113.95
+112.28
+110.53
+108.77
+107.15
+105.16
+103.09
+101.20
+99.05
+96.98
+94.93
+92.80
+90.88
+88.69
+86.66
+84.80
+82.83
+81.05
+79.53
+78.02
+76.71
+75.39
Rev. A | Page 6 of 16
S12
Magnitude (dB)
−24.26
−24.29
−24.37
−24.42
−24.40
−24.41
−24.42
−24.40
−24.38
−24.35
−24.31
−24.31
−24.25
−24.19
−24.17
−24.13
−24.08
−24.05
−24.07
−24.02
−24.03
−24.10
−24.04
−24.09
−24.18
−24.17
−24.22
−24.39
−24.49
−24.61
−24.72
−24.88
−25.15
−25.35
−25.56
−25.90
−26.16
−26.46
−26.81
−27.08
−27.50
Angle (°)
−7.99
−7.91
−7.81
−7.58
−7.63
−7.59
−7.40
−7.46
−7.50
−7.46
−7.75
−7.86
−8.20
−8.54
−8.90
−9.35
−9.95
−10.55
−11.17
−11.71
−12.51
−13.72
−14.66
−15.23
−16.23
−17.39
−18.24
−20.06
−20.74
−21.69
−23.44
−24.35
−25.31
−26.95
−27.76
−28.90
−29.05
−30.35
−29.93
−31.04
−30.65
S22
Magnitude (dB)
−6.96
−6.86
−6.75
−6.76
−6.78
−6.82
−6.87
−7.04
−7.20
−7.42
−7.66
−7.91
−8.29
−8.66
−8.97
−9.41
−9.87
−10.34
−10.83
−11.28
−11.69
−12.17
−12.54
−12.83
−12.92
−13.04
−12.99
−12.57
−12.19
−11.64
−11.00
−10.34
−9.59
−8.90
−8.29
−7.69
−7.12
−6.65
−6.20
−5.83
−5.50
Angle (°)
−23.55
−22.70
−22.45
−22.01
−21.42
−20.82
−20.25
−19.57
−18.85
−18.17
−17.76
−17.18
−16.64
−16.15
−15.97
−15.67
−15.96
−16.17
−16.68
−17.66
−19.15
−21.42
−24.24
−27.07
−32.00
−36.71
−42.66
−48.16
−54.36
−59.44
−64.07
−68.43
−72.77
−76.09
−79.17
−81.76
−84.30
−86.42
−88.14
−89.69
−91.14
Data Sheet
ADL5602
ABSOLUTE MAXIMUM RATINGS
ESD CAUTION
Table 3.
Parameter
Supply Voltage, VCC
Input Power (re: 50 Ω)
Internal Power Dissipation (Paddle Soldered)
θJA (Junction to Air)
θJC (Junction to Paddle)
Maximum Junction Temperature
Lead Temperature (Soldering, 60 sec)
Operating Temperature Range
Storage Temperature Range
Rating
6.5 V
16 dBm
600 mW
30.7°C/W
5.0°C/W
150°C
240°C
−40°C to +85°C
−65°C to +150°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Rev. A | Page 7 of 16
ADL5602
Data Sheet
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
RFIN
1
GND
2
RFOUT
3
ADL5602
(2) GND
NOTES
1. EXPOSED PADDLE. INTERNALLY
CONNECTED TO GND. SOLDER TO A
LOW IMPEDANCE GROUND PLANE.
08190-002
TOP VIEW
(Not to Scale)
Figure 2. Pin Configuration
Table 4. Pin Function Descriptions
Pin No.
1
2
3
Mnemonic
RFIN
GND
RFOUT
(2)
Exposed Paddle
Description
RF Input. This pin requires a dc blocking capacitor.
Ground. Connect this pin to a low impedance ground plane.
RF Output and Supply Voltage. DC bias is provided to this pin through an inductor that is connected to
the external power supply. The RF path requires a dc blocking capacitor.
Exposed Paddle. Internally connected to GND. Solder to a low impedance ground plane.
Rev. A | Page 8 of 16
Data Sheet
ADL5602
30
40
28
OIP3
35
45
26
35
–40°C
30
24
P1dB (dBm)
30
25
GAIN
20
P1dB
15
+85°C
25
22
20
20
–40°C
15
18
+25°C
10
16
10
+85°C
0
0
0.4
0.8
1.2
1.6
2.0
2.4
2.8
3.2
5
14
3.6
4.0
FREQUENCY (GHz)
0
4.0
12
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
FREQUENCY (GHz)
Figure 3. Noise Figure, Gain, P1dB, and OIP3 vs. Frequency
08190-006
NF
5
Figure 6. P1dB and OIP3 vs. Frequency and Temperature
21.0
44
900MHz
42
20.5
700MHz
350MHz
40
20.0
38
–40°C
19.5
36
+25°C
OIP3 (dBm)
GAIN (dB)
40
+25°C
OIP3 (dBm)
45
08190-003
NF, GAIN, P1dB, OIP3 (dB, dBm)
TYPICAL PERFORMANCE CHARACTERISTICS
19.0
+85°C
18.5
18.0
2000MHz
34
2600MHz
32
30
28
26
17.5
3500MHz
24
0.4
0.8
1.2
1.6
2.0
2.4
2.8
3.2
3.6
4.0
FREQUENCY (GHz)
20
–5
–3
–1
1
3
5
7
9
11
13
15
17
4.0
POUT PER TONE (dBm)
Figure 4. Gain vs. Frequency and Temperature
Figure 7. OIP3 vs. Output Power (POUT) and Frequency
0
5.6
–5
5.2
–10
4.8
NOISE FIGURE (dB)
–15
S11
–20
S12
–25
–30
–35
+85°C
4.4
4.0
+25°C
3.6
3.2
–40°C
2.8
–40
S22
2.4
–45
–50
0
0.4
0.8
1.2
1.6
2.0
2.4
2.8
3.2
3.6
4.0
FREQUENCY (GHz)
2.0
08190-005
S-PARAMETERS (dB)
50MHz
08190-007
0
08190-004
16.5
4000MHz
140MHz
22
08190-008
17.0
0
0.4
0.8
1.2
1.6
2.0
2.4
2.8
3.2
3.6
FREQUENCY (GHz)
Figure 5. Input Return Loss (S11), Output Return Loss (S22), and
Reverse Isolation (S12) vs. Frequency
Figure 8. Noise Figure vs. Frequency and Temperature
Rev. A | Page 9 of 16
ADL5602
Data Sheet
–30
45
40
–40
35
–50
PERCENTAGE (%)
HARMONICS (dBc)
H2
–60
H3
–70
30
25
20
15
10
–80
0
0.5
2.0
1.5
1.0
2.5
3.5
3.0
0
08190-009
–90
4.0
FREQUENCY (GHz)
32
34
38
36
40
42
44
46
50
48
OIP3 (dBm)
Figure 9. Single Tone Harmonics vs. Frequency , POUT = 0 dBm
08190-020
5
Figure 12. OIP3 Distribution at 2000 MHz, POUT = 0 dBm
80
30
70
25
PERCENTAGE (%)
PERCENTAGE (%)
60
20
15
10
50
40
30
20
5
0
18.8
19.0
19.4
19.2
19.6
19.8
20.0
GAIN (dB)
2.6
08190-010
0
2.8
3.2
3.0
3.4
3.6
4.0
3.8
NOISE FIGURE (dB)
08190-021
10
Figure 13. Noise Figure Distribution at 2000 MHz
Figure 10. Gain Distribution at 2000 MHz
98
30
96
5.25V
SUPPLY CURRENT (mA)
94
20
15
10
92
5V
90
88
86
4.75V
84
5
0
18.5
18.7
18.9
19.1
19.3
19.5
19.7
P1dB (dBm)
19.9
80
–40 –30 –20 –10
0
10
20
30
40
50
60
70
TEMPERATURE (°C)
Figure 11. P1dB Distribution at 2000 MHz
Figure 14. Supply Current vs. Temperature
Rev. A | Page 10 of 16
80
90
08190-014
82
08190-011
PERCENTAGE (%)
25
Data Sheet
ADL5602
100
98
94
92
90
+25°C
88
+85°C
86
–40°C
84
82
80
–5
–3
–1
1
3
5
7
9
11
13
15
17
19
21
POUT (dBm)
08190-100
SUPPLY CURRENT (mA)
96
Figure 15. Supply Current vs. POUT and Temperature VCC = 5 V
Rev. A | Page 11 of 16
ADL5602
Data Sheet
BASIC CONNECTIONS
The basic connections for operating the ADL5602 are shown in
Figure 16. Recommended components are listed in Table 5. The
input and output should be ac-coupled with appropriately sized
capacitors (device characterization was performed with 0.1 μF
capacitors). A 5 V dc bias is supplied to the amplifier through
the bias inductor connected to RFOUT (Pin 3). The bias voltage
should be decoupled using a 1 µF capacitor, a 1.2 nF capacitor,
and a 68 pF capacitor.
GND VCC
C6
(2)
GND
1µF
ADL5602
SOLDERING INFORMATION AND RECOMMENDED
PCB LAND PATTERN
Figure 17 shows the recommended land pattern for the ADL5602.
To minimize thermal impedance, the exposed paddle on the
package underside should be soldered down to a ground plane
along with Pin 2. If multiple ground layers exist, they should be
stitched together using vias. For more information on land
pattern design and layout, refer to the AN-772 Application
Note, A Design and Manufacturing Guide for the Lead Frame
Chip Scale Package (LFCSP).
1.80mm
C5
1.2nF
C4
68pF
2
3
C2 RFOUT
0.1µF
0.1µF
08190-015
1
RFOUT
C1
GND
RFIN
RFIN
L1
470nH
0.762mm
Figure 16. Basic Connections
0.635mm
3.48mm
5.37mm
0.20mm
0.62mm
0.86mm
1.27mm
0.86mm
08190-101
1.50mm
3.00mm
Figure 17. Recommended Land Pattern
Table 5. Recommended Components for Basic Connections
Frequency (MHz)
50 to 4000
C1
0.1 µF
C2
0.1 µF
L1
470 nH (Coilcraft 0603LS-NX or equivalent)
Rev. A | Page 12 of 16
C4
68 pF
C5
1.2 nF
C6
1 µF
Data Sheet
ADL5602
W-CDMA ACPR PERFORMANCE
–45
–50
–55
–60
–65
–70
–75
–80
–20
–15
–10
–5
POUT (dBm)
0
5
10
08190-017
The ADL5602 achieves an ACPR of −75 dBc at −5 dBm output,
at which point device noise and not distortion is beginning to
dominate the power in the adjacent channels. At an output
power of +5 dBm, ACPR is still very low at −61 dBc, making
the device particularly suitable for PA driver applications.
–40
ACPR AT 5MHz CARRIER OFFSET (dBc)
Figure 18 shows a plot of adjacent channel power ratio (ACPR)
vs. POUT for the ADL5602. The signal type being used is a single
W-CDMA carrier (Test Model 1-64) at 2140 MHz. This signal is
generated by a very low ACPR source. ACPR is measured at the
output by a high dynamic range spectrum analyzer, which
incorporates an instrument noise correction function.
Figure 18. ACPR vs. POUT, Single Carrier W-CDMA (Test Model 1-64) at
2140 MHz Evaluation Board
Rev. A | Page 13 of 16
ADL5602
Data Sheet
EVALUATION BOARD
Figure 20 shows the schematic for the ADL5602 evaluation
board. The board is powered by a single 5 V supply.
GND VCC
C6
(2)
GND
1µF
The components used on the board are listed in Table 6.
Power can be applied to the board through clip-on leads
(VCC and GND).
ADL5602
C5
1.2nF
C4
68pF
3
C2 RFOUT
0.1µF
08190-019
0.1µF
1
RFOUT
C1
GND
RFIN
RFIN
L1
470nH
2
08190-018
Figure 20. Evaluation Board Schematic
Figure 19. Evaluation Board Layout (Top)
Table 6. Evaluation Board Configuration Options
Component
C1, C2
L1
VCC and GND
C4, C5, C6
Description
AC-coupling capacitors
DC bias inductor
Clip-on terminals for power supply
Power supply decoupling capacitors
Default Value
0.1 μF, 0402
470 nH, 0603 (Coilcraft 0603LS-NX or equivalent)
C4 = 68 pF, 0603; C5 = 1.2 nF, 0603; C6 = 1 μF, 1206
Rev. A | Page 14 of 16
Data Sheet
ADL5602
OUTLINE DIMENSIONS
1.75
1.55
(2)
4.25
3.94
1
2
2.413
2.380
2.337
2.60
2.30
3
1.20
0.75
1.50 TYP
1.270
1.252
1.219
BOTTOM VIEW
0.635
0.569
0.508
3.00 TYP
TOP VIEW
2.29
2.14
4.60
4.40
1.60
1.40
0.44
0.35
END VIEW
0.52
0.32
COMPLIANT TO JEDEC STANDARDS TO-243
09-12-2013-C
PKG-003480
0.56
0.36
Figure 21. 3-Lead Small Outline Transistor Package [SOT-89]
(RK-3)
Dimensions shown in millimeters
ORDERING GUIDE
Model 1
ADL5602ARKZ-R7
ADL5602-EVALZ
1
Temperature Range
−40°C to +85°C
Package Description
3-Lead SOT-89, 7“ Tape and Reel
Evaluation Board
Z = RoHS Compliant Part.
Rev. A | Page 15 of 16
Package Option
RK-3
ADL5602
Data Sheet
NOTES
©2009–2013 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D08190-0-11/13(A)
Rev. A | Page 16 of 16
Download