Site Monitoring and Services
for Business-Critical Continuity
Virtual Ntegrity Gateway
The Liebert Virtual Ntegrity Gateway (VNG) enables a set of services that
promise to enhance the availability of your mission-critical equipment
infrastructure, while ensuring the security of your network way beyond
standard industry options.
VNG Technical Specifications
Protocols Supported:
Encapsulation
TCP/IP, ICMP, SNMP
Interfaces:
WAN
LAN
10/100 auto-sensing
10/100 auto-sensing
Power Requirements:
Model 400 – Input Voltage
Model 401 – Input Voltage
Current Draw
Connection
90 to 264VAC
16 to 24 VDC
1.2 Amps Max
Standard 115/110V Plug-in
Compliance:
Safety
Emissions
Standards
Dimensions:
Model 400 - H x W x D
(1U Rack-Mountable)
Model 401 - H x W x D
Weight
Environment Specifications:
Operating Temperature
Operating Humidity
Model 400
UL, CSA
FCC Class B
IEEE 802.3i 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
Connects via standard ethernet connection
Model 401
1.7” x 16” x 10” (400)
1.7” x 7” x 9” (401)
4 lbs
0˙ to 50˙ C (32˙ to 122˙ F)
10% to 90%, relative humidity,
noncondensing
Electromagnetic Compliance:
CE mark
FCC Part 15, Class B
EN 55024/EN 55022
Safety Agency Approvals:
CE mark
CSA 60950 US, CA
EN 60950
Standard Warranty:
One Year
This brochure is intended to be read only by Dell Sales staff
Notice for the USA
Liebert Global Services
Compliance Information Statement (Declaration of Conformity Procedure)
Global Headquarters
DoC FCC Part 15: This device complies with Part 15 of the FCC Rules.
610 Executive Campus Drive
Westerville, Ohio 43082 USA
800 LIEBERT or 614 841 6400 Phone
614 841 6405 FAX
service@ liebert.com Email
Operation is subject to the following conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including interference
that may cause television reception, which can be determined by turning
liebert.com
the equipment off and on, the user is encouraged to try one or more
of the following measures:
Customer Response Center
800 LIEBERT Phone
n
Reorient or relocate the receiving antenna.
n
Increase the separation between the equipment and receiver.
n
Plug the equipment into an outlet on a circuit different from
that of the receiver.
n
Consult the dealer or an experienced radio/television technician for help.
While every precaution has been taken to ensure accuracy
and completeness in this literature, Liebert Global Services,
Inc. and Emerson Electric Power Co. assume no
responsibility, and disclaim all liability for damages resulting
from use of this information or for any errors or omissions.
Liebert Global Services, Inc. is a division of
Emerson Electric Power.
CS-00091 (02/06)
Printed in USA
Notice for Canada
This apparatus complies with the Class B limits for radio interference
as specified in the Canadian Department of Communications Radio
Interference Regulations. (Cet appareil est conforme aux norms de Classe B
d’interference radio tel que specifie par le Ministere Candien des
Communications dans les reglements d’inteference radio.)
“Le present appareil numerique n’emet pas de bruits radioelectriques
depassant les limitas applicables aux appareils numeriques de la Class A
prescrites dans le Reglement sur le brouillage radioelectrique edicte par le
ministere des Communications du Canada.”
Notice for Europe (CE Mark)
Emerson Network Power.
The global leader in enabling
business-critical continuity.
This product is in conformity with the Council Directive
89/336/EEC, 92/31/EEC (EMC).
CAUTION: Lithium battery included with this product. Do not puncture,
mutilate, or dispose of battery in fire. Danger of explosion if battery
is incorrectly replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used battery according
to manufacturer instructions and in accordance with your local regulations.
AC Power Systems
Connectivity
DC Power Systems
Embedded Power
Power Protection
Integrated Cabinet Solutions
Outside Plant
Precision Cooling
Site Monitoring and Services
EmersonNetworkPower.com
Emerson Network Power and the Emerson
Network Power logo are trademarks and
service marks of Emerson Electric Co.
©2006 Emerson Electric Co.