Edition 2014
PELLVIT® LSG
Soaking Agent for Greasy Hides to Optimize Unhairing & Cutting Yield
Features
®
PELLVIT LSG is a soaking agent in powder form with pH regulating
properties.
Handling:
Avoid dust formation during weighing and handling.
We recommend the use of a protective facemask.
Storage stability:
Can be stored for about 2 years (from date of production) if kept in a cool,
dry place.
Benefits
Application
®
PELLVIT LSG
•
Prepares the hide in 4 to 8 hours soaking for unhairing with excellent
consistency, providing the perfect preconditions for good hair-root and
fine-hair removal, even with a reduced sulfide offer.
•
Improves the effect of the immunisation and the accessibility of sulfide
to the hair root in such a way that a low sulfide hair save unhairing
process can be applied without hair-root problems.
•
Provides particularly clean, smooth pelts with good lay-out and high
®
area yield, if subsequent liming includes an ERHAVIT liming agent to
improve the efficiency and penetration of all liming chemicals.
•
Effectively performs the soaking of all kinds of hides and skins without
having a negative effect on the integrity of bellies and flanks.
•
Promotes the removal of dirt, blood and dung.
•
Ecological, salt free product design, free of hazardous and restricted
substances.
®
PELLVIT LSG is added undiluted to the soaking bath.
A quantity of about 0.2 – 0.4% should slowly develop a stable pH between
9.5 and 10, in about 120 mins. At this pH the hide is optimally prepared for
®
subsequent unhairing. The greasier the hides, the more PELLVIT LSG
will be needed. The product is especially designed to soak in 4 to 8 hours,
but total soaking time depends on the tannery needs.
®
It is best to completely avoid the combination of PELLVIT LSG with soda
ash, caustic soda or sodium sulfide in soaking.
®
®
The use of a preserving agent (e.g. ARACIT KL new or ARACIT DA)
during soaking is highly recommended.
To boost the soaking effect 0.1 – 0.2% of a proteolytic soaking agent like
®
PELLVIT C might also be added.
1
Our application recommendations are in line with our present state of knowledge. They do not, however, exempt the customer from
performing his own tests to determine the suitability of the supplied products for their intended purposes. Application of the products lies
outside the scope of our control and therefore comes within the customer’s sphere of responsibility. We guarantee the satisfactory
quality of our products subject to general terms of sale and delivery.
Product INformation continued
Edition 2014
PELLVIT® LSG - Product characteristics
Trade form at 20°C
powder
Appearance at 20°C
white to beige powder
pH-value (10%)
approx. 11
This information is for guidance only.
A Product Specification is available on request.
2
Regarding toxicological and ecological data see the safety data sheet of above product.
®
®
®
ARACIT , PELLVIT and ERHAVIT are registered or filed trademarks owned by or licensed to TFL in most countries.
Above data are based on the current state of knowledge. However, buyer is not released from his obligation to examine the material on
receipt. Seller makes no warranty of merchantability or fitness for practical use or application.