Resinex CH-80-2 ™ Weak acidic cation exchange resin Resinex™ CH-80-2 is a high purity, premium grade, weakly acidic macroporous type cation exchange resin with -Thiourea groups. The product offers an excellent selectivity to mercury - unaffected by high contents of sulphates and/or chlorides - and is designed for industrial application. Beside the high selectivity to mercury, the product is used to remove metals like gold, platinium and palladium. Key Features and Benefits Typical Properties Type Crosslinked polystyrene divinylbenzene Form macroporous, light yellow, spherical beads Functional group Whole bead count Ionic form, as shipped Bead size Thiourea 95% min. H+ 0.42 - 1.25 mm Uniformity coefficient 1.60 max. Bulk density, as shipped 710 kg/m3 Real density Water retention Total capacity Stability, temperature Stability, pH 1.06 g/cm3 52 - 60% 1.00 eq/l min. 0-90°C 0 - 14 • High Integrity Beads Excellent resistance to mechanical degradation ensures low pressure drop • High Selectivity For Mercury Separation of heavy metal cations from solutions containing chloride and sulphate • High Operating Capacity Economical advantage • Resistance To Osmotic Shock Extended lifetime and very low number of broken beads Typical Applications • Selective removal of mercury • Waste water treatment • Removal of heavy metals from ground water Standard Design Conditions Standard Packaging Bed depth > 1.000 mm • 25 lit. PE valve bag Service flow rate 10 - 40 BV/h • 1000 litre big bag Backwash expansion 80% Resinex CH-80-2 ™ Weak acidic cation exchange resin °C 60 40 0.6 40 0.4 20 0.2 0 0 20 40 60 80 100 0 60 F) 80 8° 0.8 ) °F 4 (10 (6 6 (8 100 F) 6° °C °C 30 1.0 ) °F 20 °F (50 (40 °C °C 20 10 5°C 80 F) 8° (6 120 Pressure Drop, bar/m Pressure Drop, kPa/m °F) ) 100 1.2 Backwash Expansion, % 120 5 °C (40° F) 10 °C (50 °F) Backwash Expansion Pressure Drop C 0° (8 3 40 20 0 0 4 8 12 16 20 Flow Rate, m/h Flow Rate, m/h Product Packing 25 lit. polyethylene valve bag Polypropylene FIBCs 48 bags per pallet CAUTION (big bag), 1.000 lit. Strong oxidizing agents such as nitric acid can react violently with ion exchange resins and cause explosive type reactions. Before using strong oxidants, consult sources knowledgeable in the handling of these materials. NOTICE Due to the progressive nature of the Jacobi Carbons Group and the continually improving design and performance of our products, we reserve the right to change product specifications without prior notification. The information contained in this datasheet is intended to assist a customer in the evaluation and selection of products supplied by Jacobi Carbons. The customer is responsible for determining whether products and the information contained in this document are appropriate for customer’s use. Jacobi Carbons assumes no obligation or liability for the usage of the information in this datasheet, no guarantees or warranties, expressed or implied, are provided. Jacobi Carbons disclaims responsibility and the user must accept full responsibility for performance of systems based on this data. © Copyright 2013. Jacobi, Jacobi Carbons, Resinex, the Resinex and the Jacobi logos are trademarks of Jacobi Carbons, all of which may or may not be used in certain jurisdictions. RX-CH80_2_e_Rev10_20131129 Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 abcdef