Resinex KW-8 UB
™
Strong acid cation softening resin
Resinex™ KW-8 UB is a high purity, premium grade, pretreated, monospheric, strongly acidic gel-type cation exchange resin
specially designed for residential drinking water treatment. The KW-8 is a bead type, crosslinked, polystyrene divinylbenzene
resin that offers excellent bead integrity and very low extractables. The product is highly suitable for a wide variety of drinking
water treatment applications. Resinex™ KW-8 UB has a light amber color and is specially pretreated to remove taste, odor
and color throw. Resinex™ KW-8 UB meets the requirements of the European ResAP (2004) 3 and WRAS BS 6920.
Key Features and Benefits
Typical Properties
Type
Form
Crosslinked polystyrene divinylbenzene
Gel-type, amber, spherical beads
Functional group
• Pretreated and Rinsed
Guarantees minimal color throw and
eliminates taste and odor
Sulfonic acid
Whole bead count
Ionic form, as shipped
Bead size (95% min.)
Bulk density, as shipped
Real density
95% min.
Na
+
0.50 - 0.71 mm
820 kg/m3
1.28 g/cm3
Water retention
45 - 50%
Total capacity (Na form)
+
Volume change Ca2+ –> Na+
Stability, temperature
1.90 eq/l min.
2% max.
120°C max.
Stability, pH
0 - 14
Color throw
25 APHA max.
• High Integrity Beads
Excellent resistance to mechanical
degradation ensures low pressure drop
• Low Extractables
Specially treated to eliminate leaching of
organic matter
• European ResAP (2004) 3 Approved
Meets European Council Resolution
AP (2004) 3 for use in the processing of
foodstuffs
• WRAS BS 6920 Approved
BS 6920 for cold water and hot water up
to 85°C
Typical Applications
Standard Design Conditions
Bed depth
Service flow rate
Backwash expansion
NaCl concentration for regeneration Regeneration level
NaCl flow rate for regeneration
Rinse rate (slow)
Rinse rate (fast)
• Residential Softening
> 700 mm
8 - 40 BV/h
50 - 75%
8-15%
8 - 300 g/l
5-8 l/h/l
1-3 bed volumes at regeneration flow rate
• Industrial Softening
• Municipal Softening
Standard Packaging
• 25 lit. PE valve bag
• 1000 litre big bag
3-6 bed volumes at service flow rate
Turbidity
<5.0 NTU
Free chlorine
<1.0 ppm
This product has been tested and
certified to NSF/ANSI Standard 44
for materials safety only.
A minimum flow of 0.39 gpm per
cubic foot of media is required.
Resinex KW-8 UB
™
Strong acid cation softening resin
Pressure Drop
Backwash Expansion
2
2
Flow Rate, gpm/ft
Flow Rate, gpm/ft
32
F)
120
1.0
100
°C
30
°C
40
(10
0.8
F)
0.6
40
0.4
20
0.2
0
0
20
40
60
4
8
80
100
80
60
0
0
0
10
20
400
12
1.4
30
1.2
25
1.0
20
0.8
15
5
50
NaCl regeneration, g/l
320
10
15
20
25
0
Hardness Leakage, ppm as CaCO3
240
Capacity, kg/ft3
Capactiy, eq/lit
160
35
0
40
Hardness Leakage Information
1.6
0.6
30
Flow Rate, m/h
NaCl regeneration, g/l
80
20
20
Capacity Information
0
16
40
Flow Rate, m/h
1.8
12
6°
(8
4°
60
0
5°C
(40°
F)
10
°C
(
50
20
°F
°C
)
(6
30
8°
°C
F)
(8
6°
F)
(6
1.2
Pressure Drop, bar/m
2
80
F)
8°
C
0°
40
Bed Expansion, %
(50
°F
)
24
5°C
100
Pressure Drop, kPa/m
16
(40
°F)
8
10
°C
0
120
0
80
0
5
160
240
320
400
10
15
20
25
10
8
6
4
2
0
NaCl Regeneration, lb/ft3
NaCl Regeneration, lb/ft3
Capacity and Hardness Leakage graphs are shown assuming a service flow of 4 gpm/ft3 (32 l/h/l) and total dissolved solids of 400 ppm and 20 grains of total hardness. The hardness leakage will increase
and the capacity will decrease while increasing total dissolved solids and total hardness.
NOTICE If this product is to be used for potable water treatment, or any food grade application, a special procedure must be applied for the initial run. Please ask your nearest Jacobi office for this
technical bulletin.
Product Packing
25 lit. polyethylene valve bag
Polypropylene FIBCs
48 bags per pallet
CAUTION
(big bag), 1.000 lit.
Strong oxidizing agents such as nitric acid can react violently with ion exchange resins and cause explosive type reactions. Before using strong oxidants, consult sources knowledgeable in the handling of these materials.
NOTICE Due to the progressive nature of the Jacobi Carbons Group and the continually improving design and performance of our products,
we reserve the right to change product specifications without prior notification. The information contained in this datasheet is intended to
assist a customer in the evaluation and selection of products supplied by Jacobi Carbons. The customer is responsible for determining whether
products and the information contained in this document are appropriate for customer’s use. Jacobi Carbons assumes no obligation or liability
for the usage of the information in this datasheet, no guarantees or warranties, expressed or implied, are provided. Jacobi Carbons disclaims
responsibility and the user must accept full responsibility for performance of systems based on this data.
© Copyright 2015. Jacobi, Jacobi Carbons, Resinex, the Resinex and the Jacobi logos are trademarks of Jacobi Carbons, all of which may
or may not be used in certain jurisdiction.
RX-KW8UB_e_Rev11_20150602
Lenntech
info@lenntech.com Tel. +31-152-610-900
www.lenntech.com Fax. +31-152-616-289
abcdef