Ensuring The High Availability
Of Mission-Critical Data And Applications.
About Emerson Network Power
Thermal Management
Locations
Emerson Network Power, a business of Emerson (NYSE:EMR),
delivers software, hardware and services that maximize availability,
capacity and efficiency for data centers, healthcare and industrial
facilities. A trusted industry leader in smart infrastructure
technologies, Emerson Network Power provides innovative data
center infrastructure management solutions that bridge the gap
between IT and facility management and deliver efficiency and
uncompromised availability regardless of capacity demands. Our
solutions are supported globally by local Emerson Network Power
service technicians. Learn more about Emerson Network Power
products and services at
www.EmersonNetworkPower.eu
Emerson Network Power
Global Headquarters
1050 Dearborn Drive
P.O. Box 29186
Columbus, OH 43229, USA
Tel: +1 614 8880246
Emerson Network Power
Europe Middle East And Africa
Thermal Management
Customer Experience Center
Via Leonardo Da Vinci, 16/18
Zona Industriale Tognana
35028 Piove di Sacco (PD) Italy
Tel: +39 049 9719 111
Fax: +39 049 5841 257
ThermalManagement.NetworkPower.Eu@Emerson.com
AC Power
Customer Experience Center
Via Fornace, 30
40023 Castel Guelfo (BO) Italy
Tel: +39 0542 632 111
Fax: +39 0542 632 120
ACpower.NetworkPower.EMEA@Emerson.com
While every precaution has been taken to ensure accuracy and completeness
herein, Emerson assumes no responsibility, and disclaims all liability,
for damages resulting from use of this information or for any errors or omissions.
Specifications subject to change without notice.
MKA4L0UKCECTM Rev.1-03/2015
Emerson Network Power.eu
Follow us on Social Media:
Emerson. Consider it Solved, Liebert®, Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. or one of its affiliated
companies ©2015 Emerson Electric Co. All rights reserved.
Thermal
Management
Emerson Network Power’s Customer Experience Center located in Tognana (Padova - Italy), is specifically designed for
customers to interact with Thermal Management data center technologies. The center gives our customers the unique
opportunity to witness pre-installation demonstrations, covering technical performance, interoperability and efficiency of
Emerson Network Power’s Thermal Management solutions under a broad range of real field conditions.
Customers visiting the center may also benefit from a comprehensive consultation from our R&D, engineering and
application specialists.
4 Showroom
3 Floor-Mount Validation Area
The Floor-Mount Validation Area meets the
increasing requests for witness tests and
specific product-type approvals.
Equipped with a highly automated testing
chamber, this validation area can balance
a thermal load of up to 200 kW and can
simulate a test environment within a
temperature range of 0°C to 60°C.
The Customer Experience Center provides customers, consultants and data center specialists with the most complete testing
area to experience the capabilities of our technologies at peak conditions. All our measuring tools are periodically tested to
adhere to current international quality procedures.
Every customer visit is accompanied by a complete final report which includes each and every tested parameter as well as
the relevant outputs for the specific Thermal Management unit validated. With our constant focus on our customers’ needs,
we guide them through a first-hand experience with full transparency and flexibility, enabling them to achieve the highest
standards of technical excellence.
6
The Academy
1 R&D Validation Area
5
The Academy is designed with the purpose of investing in Emerson Network Power’s
greatest asset: People. The Academy offers value by providing business specific training
courses and innovative learning solutions to develop the knowledge and skills of
Emerson Network Power employees.
5 Evaporative Cooling
Validation Area
4
The Research & Development Validation
Area n. 1 is specifically designed to test
floor-mount units and can balance a
thermal load of up to 150 kW with a
chamber air temperature between 0°C and
60°C.
3
Welcome Area
2 R&D Validation Area
1
2
Designed for conditioners belonging
to the Telecom sector, the Research &
Development Validation Area n. 2 includes
two different testing chambers: one
simulating internal ambient conditions
from 0°C to 60°C and the other simulating
external ambient conditions from -32°C
to 60°C. This validation area can balance
a thermal load of up to 100 kW (50 kW in
each room).
The Customer Experience Center’s
Showroom is specifically designed for
customers to interact with Thermal
Management units:
Liebert® PDX, available from 15 to 120 kW.
The direct expansion solution ideal for small
and medium data centers.
Liebert® CRV, available from 11 to 50 kW.
The row-based cooling unit designed to
deliver the highest availability.
Liebert® MC, available up to 160 kW.
The highly efficient Microchannel
Condenser.
Entrance
Our Thermal Management Customer
Experience Center features a dedicated area
to test the state-of-the-art Liebert® EFC Emerson Network Power’s highly efficient
indirect evaporative freecooling unit.
The Evaporative Cooling Validation Area
testing parameters include IT loads of up
to 400 kW and an airflow of up to 100,000
m3 per hour at any external ambient
temperature required to simulate typical
peak conditions across the EMEA region.
6 Freecooling Chiller Validation Area
The Freecooling Chiller Validation Area,
which houses both freecooling and
adiabatic freecooling chillers, is able to
balance a thermal load of up to 2000 kW
with a chamber air temperature between
20°C and 50°C and chiller water set point
between 5°C and 20°C.