GAF MATERIALS CORPORATION MSDS #2082 MATERIAL SAFETY DATA SHEET

advertisement
GAF MATERIALS CORPORATION
MATERIAL SAFETY DATA SHEET
MSDS #2082
MSDS DATE: 11/06
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME:
TRADE NAME:
CHEMICAL NAME/SYNONYM:
CHEMICAL FAMILY:
MANUFACTURER:
Deck-Armor
NA
NA
NA
GAF Materials Corporation
1361 Alps Road, Wayne, NJ 07470
ADDRESS:
24 HOUR EMERGENCY
PHONE: (CHEMTREC)
INFORMATION ONLY:
PREPARED BY:
800-424-9300
800-766-3411
PHCurry
PHCurry
APPROVED BY:
NFPA HAZARD RATING:
0
0
0
none
Yes
OSHA HAZARDOUS:
Health
Flammable
Reactive
Special Hazards
HMIS HAZARD RATING:
0
0
0
none
No X
SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS
CHEMICAL NAME
Crystalline Silica
Polymer/Solids
Proprietary – Termed
“Active Ingredient”
CAS #
68855-54-9
% (BY WT)
<1%
Proprietary
<5%
Proprietary
<1%
OSHA
OCCUPATIONAL EXPOSURE LIMITS
ACGIH
OTHER
0.025 mg/m3
SECTION 3: HAZARDS IDENTIFICATION
PRIMARY ROUTE OF EXPOSURE:
SIGNS & SYMPTONS OF EXPOSURE
Eyes:
Skin:
Ingestion:
Inhalation:
ACUTE HEALTH HAZARDS:
n/a
CHRONIC HEALTH HAZARDS:
CARCINOGENICITY:
not known
not known
PAGE 1 OF 4
n/a
n/a
n/a
n/a
May cause irritation to the throat, mouth, and stomach and/or may cause nausea.
GAF MATERIALS CORPORATION
MATERIAL SAFETY DATA SHEET
MSDS #2082
MSDS DATE: 11/06
SECTION 4: FIRST AID MEASURES
For minor burns caused by molten plastic material, treat with cool running water immediately.
If swallowed, contact a physician.
none
FIRST AID PROCEDURES:
NOTES TO PHYSICIANS OR FIRST AID
PROVIDERS:
SECTION 5: FIRE-FIGHTING PROCEDURES
H2O, Dry Chemical, CO2 or Foam
CO, CO2, Oxides of Nitrogen, Aldehydes and unidentified organic compounds may
be formed upon combustion. The nature and quantity of by-products formed upon
combustion will vary under various conditions -temperature, available oxygen, the
presence of other materials, and the nature of combustion (flame or carbonization).
Use self-contained breathing apparatus.
Deck-Armor fabric is a combustible
SUITABLE EXTINGUISHING MEDIA:
HAZARDOUS COMBUSTION PRODUCTS:
RECOMMENDED FIRE FIGHTING PROCEDURES:
UNUSUAL FIRE & EXPLOSION HAZARDS:
SECTION 6: ACCIDENTAL RELEASE MEASURES
n/a
ACCIDENTAL RELEASE MEASURES:
SECTION 7: HANDLING AND STORAGE
Adequately restrain rolls to prevent shifting during handling and storage. Store
below 60°C.
Avoid contact with dripping molten plastic.
HANDLING AND STORAGE:
OTHER PRECAUTIONS:
STEPS TO BE TAKEN IN CASE MATERIAL IS
RELEASED OR SPILLED:
Clean up material and properly dispose of.
PRECAUTIONS TO BE TAKEN IN HANDLING &
STORAGE:
Avoid sources of ignition.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS:
VENTILATION:
RESPIRATORY PROTECTION:
EYE PROTECTION:
SKIN PROTECTION:
OTHER PROTECTIVE EQUIPMENT:
WORK HYGIENIC PRACTICES:
EXPOSURE GUIDELINES:
PAGE 2 OF 4
n/a
not required
not required under normal use circumstances
wear appropriate eye protection
long sleeve shirt and trousers
n/a
avoid generating dusts
n/a
GAF MATERIALS CORPORATION
MATERIAL SAFETY DATA SHEET
MSDS #2082
MSDS DATE: 11/06
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE & ODOR:
FLASH POINT:
METHOD USED:
EVAPORATION RATE:
Ph (undiluted product):
SOLUBILITY IN WATER:
VAPOR DENSITY:
VAPOR PRESSURE:
VOC WITH WATER (LBS/GAL):
Lamination of Grey and Black Nonwoven Faint Acrylic Odor
>300ºC
LOWER EXPOSURE LIMIT:
closed cup
UPPER EXPLOSIVE LIMIT:
n/a
BOILING POINT:
n/a
MELTING POINT:
insoluable
SPECIFIC GRAVITY:
n/a
PERCENT VOLATILE:
n/a
MOLECULAR WEIGHT:
n/a
WITHOUT WATER (LBS/GAL):
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
SECTION 10: STABILITY AND REACTIVITY
THERMAL STABILITY:
CONDITIONS TO AVOID (STABILITY):
INCOMPATIBILITY (MATERIAL TO
AVOID):
HAZARDOUS DECOMPOSITION OR BYPRODUCTS:
STABLE X
UNSTABLE
Contact with strong oxidants, acids, and bases; temperatures above 250ºC
CO, CO2, Oxides of Nitrogen, Aldehydes and unidentified organic compounds
may be formed upon combustion.
Will not occur.
HAZARDOUS POLYMERIZATION:
_________________________________________________________________________________________________________________
SECTION 11: TOXICOLOGICAL INFORMATION
TOXICOLOGICAL INFORMATION:
n/a
SECTION 12: ECOLOGICAL INFORMATION
ECOLOGICAL INFORMATION:
No data.
_________________________________________________________________________________________________________________
SECTION 13: DISPOSAL CONSIDERATIONS
WASTE DISPOSAL METHOD:
RCRA HAZARD CLASS:
Dispose of in accordance with federal, state, and local health and pollution laws and regulations in landfill
or by incineration.
n/a
SECTION 14: TRANSPORT INFORMATION
U.S. D0T Transportation
PAGE 3 OF 4
This product not regulated by DOT for transportation (not HAZMAT)
NA
PROPER SHIPPING NAME:
NA
HAZARD CLASS:
NA
ID NUMBER:
NA
PACKING GROUP:
NA
LABEL STATEMENT:
GAF MATERIALS CORPORATION
MATERIAL SAFETY DATA SHEET
MSDS #2082
MSDS DATE: 11/06
SECTION 15: REGULATORY INFORMATION
U.S. FEDERAL REGULATIONS:
TSCA:
CERCLA:
SARA:
311/312 HAZARD CATEGORIES:
313 REPORTABLE INGREDIENTS:
Not regulated.
Not regulated.
Not regulated.
Not regulated.
This product contains no known toxic chemicals subject to the requirements of Section 313 of the
Emergency Planning and Community Right-To-Know Act of 1986 and 40 CFR 372.
_________________________________________________________________________________________________________________
SECTION 16: OTHER INFORMATION
ADDITIONAL COMMENTS:
DATE OF PREVIOUS MSDS:
CHANGES SINCE PREVIOUS MSDS:
None
12-01-2006
new
This information relates to the specific material designated and may not be valid for such material used on combination with any
other materials or in any process. Such information is to the best of our knowledge and belief accurate and reliable as of the date
compiled. However, no representation, warranty or guarantee, expressed or implied, is made as to its accuracy, reliability, or
completeness. It is the user’s responsibility to satisfy himself as to the suitability and completeness of such information for his
particular use. We do not accept liability for any loss or damage that may occur from the use of this information. Nothing herein
shall be construed as a recommendation for uses which infringe valid patents or as extending a license of valid patents.
PAGE 4 OF 4
Download