Energy
Data Record for Used Industrial Steam Turbines / Turbosets
Turbine
Machine No.:
Original Equipment Manufacturer (OEM): Siemens
Year of manufacture: 1997
Turbine model: ATP 2 V45A
Design output (MW) 6,6 MW electrical output
[at best turbine efficiency]:
Maximum output (MW): 6,62 MW output of
Generator
Steam consumption at design output (kg/kWh):
Steam consumption at max. output (kg/kWh):
1)
_
Max. main steam temperature (°C) : 450
Main steam temperature (°C)1): 405
Main steam pressure (bar g)1): 20-25
Main steam flow (t/h)1): 21,6
Exhaust steam temperature (°C)1):
Exhaust steam flow (t/h)1): 24,5-32,4
Exhaust steam pressure (bar): 0,036-0,057
Extraction pressure (bar g)2):
Extraction flow (t/h)2):
Speed (rpm): 6804
Allowable frequency range (Hz): 50
Direction of rotation: ccw
Exhaust steam nozzle (downward, upward, right, left or axial):
Non-drive end of turbine (HP/LP end):
Package (yes/no), if yes, please state configuration (turbine, gear unit, generator, compressor): Yes
In case of package, is integral lube oil system provided? (yes/no): Yes
or extract from Operating Manual
Load points
1
2
3
Main steam parameters
Main steam flow (t/h)
18
11,9
5,8
0,036
0,021
0,02
5210 kW
2855 kW
1240 kW
Extraction pressure (bar)
Extraction flow (t/h)
Exh. steam pressure (bar)
Exh. steam temp. (°C)
Terminal output (kW)
1)
Turbine condition Ok
Last minor overhaul:
Last major overhaul:
Operating hours: 1000
Date of turbine shutdown and preservation details: 2008
Expected to be available as from: Immediately as is where is.
1) in accordance with turbine design
2) where applicable
Siemens AG
Energy Sector; Management: Michael Süss
Energy Service Division; Management: Randy Zwirn
Oil & Gas and Industrial Applications Services; Management: Willibald Meixner
Frankenstr. 70-80
90461 Nuremberg
Germany
Phone: +49 (911) 4130 0
Fax: +49 (911) 4130 440
Siemens Aktiengesellschaft: Chairman of the Supervisory Board: Gerhard Cromme; Managing Board: Peter Löscher, Chairman, President and Chief Executive
Officer; Roland Busch, Brigitte Ederer, Klaus Helmrich, Joe Kaeser, Barbara Kux, Hermann Requardt, Siegfried Russwurm, Peter Y. Solmssen, Michael Süss
Registered offices: Berlin and Munich, Germany; Commercial registries: Berlin Charlottenburg, HRB 12300; Munich, HRB 6684
WEEE Reg. No. DE 23691322
SCF 04/2011 V08.12
Page 1 of 3
Energy
Are spare parts available? If yes, which ones?
No
Turbine control and protection system:
Original Equipment Manufacturer (OEM): ABB
Hydraulic or electronic:
Overspeed protection system (hydraulic [bolt]/electronic):
Axial shaft position monitoring system (hydraulic [nozzle]/electronic):
_
Vibration monitoring system (yes/no):
Actuators for control and stop valve(s) (HP/LP hydraulic system):
Magnet wheel installed on turbine shaft (yes/no, if yes, please state number of teeth):
Electrohydraulic converter installed (yes/no):
Condenser:
Original Equipment Manufacturer (OEM):
Condenser model:
Condensing capacity (t/h):
Condenser pressure (bar):
3
Cooling water flow (m /h):
Cooling water velocity (m/s):
Cooling water inlet temperature (°C):
Thermal capacity (MW):
Supply lines:
Complete operating documentation available (yes/no): Yes
Complete machine file available (yes/no): Yes
Is the driven machine also available for purchase (yes/no):
SCF 04/2011 V08.12
Page 2 of 3
Energy
_
Driven generator
Machine No.:
Original Equipment Manufacturer (OEM): ABB
Rating (MVA):
Generator type (cooling system):
Generator model: HSG 710LR4
Voltage (kV): 6500
Frequency (Hz): 50
Current (A): 341
Power factor (cos phi):
Speed (rpm): 1500
Design:
Insulation class: F
Type of enclosure:
Cooling water inlet temperature (°C):
Cooling water flow (m3/h):
Compound excitation (… V - … A):
Generator condition Ok
Last minor overhaul:
Last major overhaul:
Operating hours: 1000
Date of turbine shutdown and preservation details:
Expected to be available as from: Immediately as is where is
Gear unit:
Original Equipment Manufacturer (OEM):
Gear unit model:
Rating (HP)
Speed (rpm):
Complete scope of supply available for purchase:









Size (footprint) / dimensions:
Please provide photographs of the turboset / turbine separately in electronic form.
SCF 04/2011 V08.12
Page 3 of 3