POLY-FINE XLDC Series Filter Capsules Data Sheet

advertisement
Data Sheet 1845-C
POLY-FINE® XLDC Series
Filter Capsules
Disposable Pleated Polypropylene Capsule
• 100% Polypropylene Materials of Construction
• Retention Ratings from 1.5 to 90 microns (µm)
• Biologically and Chemically Inert Materials for Wide
Compatibility
• Fast Rinse-Up to 18 Megohm-cm
• Four Inlet and Outlet Connection Options Allow for Easy
Retrofits
• Proprietary Filter Media Provides High Product
Consistency
Performance Specifications
Retention Ratings:
1.5, 3, 4.5, 10, 20, 30, 40, 70, 90 micron (µm)
Maximum Operating Pressure (liquid only)1:
100 psig (6.9 bar) @ 68°F (20°C)
25 psig (1.7 bar) @ 176°F (80°C)
Maximum Differential Pressure:
50 psid (3.5 bard) @ 68°F (20°C)
25 psid (1.7 bard) @ 176°F (80°C)
Chemical Compatibility:
Capsules resist most acids and bases (pH 1-14), and most
oxidizing agents.
Sanitizing Agents:
Capsules may be sanitized in place with common sanitizing
agents. Consult factory for compatibility information.
Product Specifications
Materials of Construction:
Polypropylene
Filter Media:
Support Material:
Polypropylene
Housing & Internal
Hardware:
Polypropylene
Vent Ports:
Polypropylene
Sealing:
Thermal Bond
Connection Sizes:
1
⁄4" (0.64 cm) or 1⁄2" (1.27 cm)
Dimensions:
Overall Height:
4.3" (10.92 cm)
Diameter:
3.7" (9.40 cm)
1
- With compatible fluids only.
Typical Capsule D.I. Water Flow vs. Differential
Pressure for Application Sizing
Flow Rate (lpm)
8
11
15
0
19
0.552
7
0.483
1.5
6
µm
0.414
5
0.345
4
0.276
3 µm
3
2
4.5 µm
1
10 µm
0.207
0.138
0.069
0
0
0
1
2
3
4
4
8
11
19
15
1.00
Differential Pressure (psid)
4
Bard (x100 = kPa)
Differential Pressure (psid)
0
8
0.069
0.75
0.052
µm
20
0.034
0.50
30 µm
40 µm
70 µm
0.25
0.017
90 µm
0
0
0
5
Flow Rate (gpm), Water at 68˚F (20˚C)
Bard (x100 = kPa)
Flow Rate (lpm)
1
2
3
4
5
15
19
Flow Rate (gpm), Water at 68˚F (20˚C)
Part Numbers/Ordering Information
XLDC n – t
(e.g., XLDC3–C1)
Code
t
C1
C4
C5
C6
2
3
Connection Type
Inlet
1
⁄2" NPT2
1
⁄4" NPT
1
⁄4" HB3
1
⁄4" NPT
- National Pipe Thread.
- Hosebarb.
Outlet
Flow Rate (lpm)
⁄2" NPT
4
0
1
⁄4" NPT
8
1
⁄4" HB
7
1
⁄4" HB
6
1
8
11
0.552
1.5
0.483
µm
0.414
5
0.345
4
Bard (x100 = kPa)
Filter
Grades
1.5 µm
3 µm
4.5 µm
10 µm
20 µm
30 µm
40 µm
70 µm
90 µm
Differential Pressure (psid)
Code
n
1.5
3
4.5
10
20
30
40
70
90
0.276
3 µm
3
2
4.5 µm
1
10 µm
0
0.207
0.138
0.069
0
0
1
2
3
4
5
Flow Rate (gpm), Water at 68˚F (20˚C)
2200 Northern Boulevard.
East Hills, New York 11548-1289
1.800.FILTERS toll free
516.484.5400 phone
516.484.3216 fax
www.pall.com
Visit us on the Web at www.pall.com
Pall Corporation has offices and plants throughout the world in locations including:
Argentina, Australia, Austria, Belgium, Brazil, Canada, China, France, Germany, India,
Indonesia, Ireland, Italy, Japan, Korea, Malaysia, Mexico, the Netherlands, New Zealand,
Norway, Poland, Puerto Rico, Russia, Singapore, South Africa, Spain, Sweden, Switzerland,
Taiwan, Thailand, United Kingdom, United States, and Venezuela. Distributors are located in all
major industrial areas of the world.
© Copyright 2005, Pall Corporation. Pall,
trademark registered in the USA.
Bulletin #1845-C
and Poly-Fine are trademarks of Pall Corporation. ® Indicates a Pall
is a service mark of Pall Corporation.
4/05
Download