Data Sheet 1844-3C
Poly-Fine® PFC Series
Filter Capsules
Disposable Pleated Polypropylene Capsule
• 100% polypropylene materials of construction
• Retention ratings from 0.2 to 30 µm
• Biologically and chemically inert materials for wide
compatibility
• Fast rinse-up to 18 megohm-cm
• Four inlet and outlet connection options allow for easy
retrofits
• Filter media produced by Pall for high consistency
Performance Specifications
Retention Ratings:
0.25, 0.45, 0.8, 2, 3, 5, 10, 30 µm
Maximum Operating Pressure:
liquid only:100 psig (6.9 bar) @ 68°F (20°C)
liquid only: 25 psig (1.7 bar) @ 176°F (80°C)
Maximum Differential Pressure:
50 psid (3.5 bar) @ 68°F (20°C)
25 psid (1.7 bar) @ 176°F (80°C)
Chemical Compatibility:
Capsules resist most acids and bases (pH 1-14), and
most oxidizing agents.
Sanitizing Agents:
Capsules may be sanitized in place with common
sanitizing agents. Consult factory for compatibility
information.
Product Specifications
Materials of Construction:
Filter Media:
Polypropylene
Support Material:
Polypropylene
Housing & Internal
Hardware:
Polypropylene
Vent Ports:
Polypropylene
Sealing:
Thermal Bond
Connection Sizes:
1
⁄4" (0.64 cm), 1⁄2" (1.27 cm)
Dimensions:
Overall Height:
Diameter:
4.3" (10.9 cm)
3.7" (9.4 cm)
Flow Specifications
0
1.9
Flow Rate (lpm)
3.8
5.7
7.6
9.5
4
0
0.14
0.45 µm
0.07
0
0
0.5
1
1.5
2
Differential Pressure (psid)
2
0.8 µm
3.8
5.7
7.6
9.5
m
2µ m
3µ
0.2
0.21
Bard (X100 = k Pa)
Differential Pressure (psid)
0.25 µm
3
1
1.9
0.25
0.28
0.014
m
5µ m
µ
10 µm
30
0.15
0.010
0.1
0.007
0.05
0.003
0
0
2.5
0.5
Flow Rate (gpm), Water at 68°F (20°C)
0.017
1
1.5
2
2.5
Flow Rate (gpm), Water at 68°F (20°C)
Part Numbers/Ordering Information
PFC ✪ – ▼ (e.g., PFC2–C1)
Code
✪
0.25
0.45
0.8
2
3
5
10
30
Retention
Ratings
0.25 µm
0.45 µm
0.8 µm
2 µm
3 µm
5 µm
10 µm
30 µm
Code
▼
C1
C4
C5
C6
1
2
Connection Type
Inlet
1
⁄2" NPT 1
1
⁄4" NPT
1
⁄4" HB 2
1
⁄4" NPT
Outlet
⁄2" NPT
1
⁄4" NPT
1
⁄4" HB
1
⁄4" HB
1
- National Pipe Thread (NPT).
- Hosebarb (HB).
25 Harbor Park Drive
Port Washington, New York 11050
+1 888 873 7255 toll free (U.S. only)
+1 516 484 3600 phone
+1 516 484 0364 fax
www.pall.com web
Visit us on the Web at www.pall.com
Pall Corporation has offices and plants throughout the world in locations including:
Argentina, Australia, Austria, Belgium, Brazil, Canada, China, France, Germany, India,
Indonesia, Ireland, Italy, Japan, Korea, Malaysia, Mexico, the Netherlands, New Zealand,
Norway, Poland, Puerto Rico, Russia, Singapore, South Africa, Spain, Sweden, Switzerland,
Taiwan, Thailand, United Arab Emirates, United Kingdom, United States, and Venezuela.
Distributors are located in all major industrial areas of the world.
© Copyright 2008, Pall Corporation. Pall,
, and Poly-Fine are trademarks of Pall Corporation.
® Indicates a Pall trademark registered in the USA.
is a service mark of Pall Corporation.
Bulletin #1844-3C
6/08
Bard (X100 = k Pa)
Flow Rate (lpm)