Data Sheet MEUKKCENa
UltiKleen™ Filters
and KC Assemblies
Description
Pall’s UltiKleen filter is an advanced all-fluoropolymer
cartridge that is highly recommended for critical chemical
filtration. Prewet filters are guaranteed extractable levels
and particle cleanliness levels. The UltiKleen KC
Assembly is a completely disposable filter unit, consisting
of an all fluoropolymer UltiKleen filter.
Features
• Utilizes an all fluoropolymer filter cartridge ensuring
excellent effluent cleanliness
• Eliminates O-rings for KC assemblies
• Low differential pressure
• Low extractable
• Compatible with virtually all chemicals
• 100% integrity tested
• Available in In-line and T-flow styles
• High pressure and temperature capability
UltiKleen Filters
Specifications
Materials of Construction1
Operating Recommendations
• Available prewet as an option
• Proper wetting procedures should be followed if
prewet option is not selected. IPA or other low surface
tension wetting liquids need to be completely flushed
prior to chemical contact.
• Must allow for proper venting
1
Removal Ratings
Configurations (KC Assemblies)
UltiKleen KC Assemblies
Components
Materials
Filter Medium
PTFE
Media Support
PTFE / PFA
Inner Core / Outer Cage
PFA
End Caps
PFA
Sealing methods
Melt seal
O-ring (for cartridge)
FEP Encapsulated fluoroelastomer
Housing (for KC type)
PFA
All Fluoropolymer components made without PFOA.
FD
FT
FR
FX
0.05 μm
0.1 μm
0.2 μm
0.45 μm
T-Flow, In-line
Configurations (Cartridge Filters)
ABF04
Nominal Filter Areas
2
0.48 m / 5.17 ft
1.2 m / 13 ft
2.4 m / 26 ft
3.6 m / 39 ft2
Nominal Length
102 mm / 4 in
254 mm / 10 in
508 mm / 20 in
762 mm / 30 in
Maximum Operating Temperature
AB1
2
2
170 ºC / 338 ºF
Maximum Forward Differential Pressure
0.59 MPa < 50 ˚C / 85 psid < 120 ˚F
Maximum Operating Pressure
0.49
0.39
0.34
0.20
0.15
0.12
MPaG
MPaG
MPaG
MPaG
MPaG
MPaG
(
(
(
(
(
(
<
<
<
<
<
<
25 ˚C / 77 ˚F )
60 ˚C / 140 ˚F )
90 ˚C / 194 ˚F )
120 ˚C / 248 ˚F )
150 ˚C / 302 ˚F )
170 ˚C / 338 ˚F )
AB2
2
2
AB3
2
2
UltiKleenTM Filters
Pressure Drop vs. Liquid Flow Rate (Water 20 ºC )2
ABF04 (102 mm / 4 in type)
Clean pressure drop (kPa)
Clean pressure drop (kPa)
ABF1 (254mm / 10 in type)
50
0.05 µm
40
0.1 µm
30
20
0.2 µm
10
0.45 µm
0
0
10
20
30
40
60
0.05 µm
50
40
0.2 µm
20
0.45 µm
10
0
Flow rate (L/min)
2
0.1 µm
30
0
5
10
Flow rate (L/min)
Typical flow rates. For liquids with viscosity differing from water, multiply the pressure drop by the viscosity in centipoise.
Unit conversion: 1 bar = 0.1 MPa
Dimensions
AB Type
68 mm
2.8 in
L
MR Type
68 mm
2.8 in
L
AB04 Type
68 mm
2.8 in
L
Part Numbers / Ordering Information3
1
UCF
2
3EH1 3
MRF 1
UCF
2
25EH1 3
ABF
Table 1
Code
Table 2
Cartridge Length
Nominal
04
4 in
Code Removal Ratings
AB type
MR type
130 mm / 5.1 in
-
1
10 in
284 mm / 11.2 in
262 mm / 10.3 in
2
20 in
544 mm / 21.4 in
503 mm / 19.8 in
3
30 in
794 mm / 31.3 in
-
D
0.05 µm
T
0.1 µm
R
0.2 µm
X
0.45 µm
Table 3
Code
Prewet Option
blank
Without Prewet
-K3
Prewet filter ( packaged in DI water)
-K7
Prewet filter ( packaged in DI water), Low metal extractables4
3
Part numbers in conbination with all codes are not always availbale. Please contact Pall for the part number availability.
4
Please contact Pall on the extractable conditions.
15
20
UltiKleenTM KC Assemblies
Pressure Drop vs. Liquid Flow Rate (Water, 20℃)
5 inch T-flow (3/4 inch)
Clean pressure drop (kPa)
Clean pressure drop (kPa)
10 inch T-flow (3/4 inch)
60
0.05μm
40
0.10μm
0.20μm
0.45μm
20
0
0
10
20
30
60
0.05μm
40
0.10μm
0.20μm
20
0.45μm
0
0
5
Flow rate (L/min)
Clean pressure drop (kPa)
Clean pressure drop (kPa)
0.05μm
40
0.10μm
0.20μm
20
0.45μm
0
10
15
20
5 inch In-line (3/4 inch)
10 inch In-line (3/4 inch)
60
0
10
Flow rate (L/min)
20
30
60
0.05μm
40
0.10μm
0.20μm
0.45μm
20
0
0
2
Flow rate (L/min)
4
6
8
10
12
Flow rate (L/min)
Dimensions by Configurations
10 inch T-flow
L5
5 inch T-flow
10 inch In-line
5 inch In-line
L5
L6
L6
L2
L4
L1
L3
L6
L6
Nominal Length (mm)
Length
Tube size 3/4 in (Code 13)
Tube size 1/2 in (Code 09)
L1
416
-
L2
281
-
L3
430
420
L4
292
282
L5
180
-
L6
105
106
UltiKleenTM KC Assemblies
Part Numbers / Ordering Information5
LDF 1
2 UCF 3
4
Table 1
5
6
Table 2
Code
Flow
Code
T
T-flow
1
10 in
N
In-line
05
5 in
Table 3
Code
D
T
Cartridge Size
Table 4
Removal Ratings
Code
6
0.05 μm
09
0.1 μm
13
Table 4
Tube Size
1/2 in female
3/4 in female
Code
Connection Size
7
3/8 in male
7
1/2 in male
8
06
08
R
0.2 μm
12
3/4 in male
X
0.45 μm
649
3/8 in male
Table 5
Table 6
Code
Connections
Code
Prewet Option
1
20 series (Flowell)
blank
Without Prewet
2
Super Pillar Type (Nippon Pillar)
-K3
Prewet filter (packaged in DI water)
51
Flare style
-K7
Prewet filter (packaged in DI water), Low metal extractables11
610
FinalLock
71
Super Pillar 300 P series (Nippon Pillar)
72
Super Pillar 300 P series L type (Nippon Pillar)
8
60 series (Flowell)
5
Disposable capsules are not available with every option. Please contact Pall for the part number availability.
Only for In-line type.
7
Only for flare style of In-line type.
8
Only for flare style.
9
Only for Super Pillar 300 series.
10
Only for T-flow type.
11
Contact your local Pall representative for information about extractables.
6
Microelectronics
Visit us on the Web at www.pall.com/micro
25 Harbor Park Drive
Port Washington, NY 11050
+1 800 360 7255
toll free US
+1 516 484 3600
telephone
+1 516 801 9700
fax
Microelectronics@pall.com
Nihon Pall Ltd.
6-5-1, Nishishinjuku,
Shinjuku-ku
Tokyo 163-1325 Japan
+81 3 6901 5700
telephone
+81 3 5322 2109
fax
Pall Corporation has offices and plants throughout the world. For Pall representatives in your
area, please go to www.pall.com/corporate_contact.asp.
Because of technological developments related to the products, systems, and/or
services described herein, the data and procedures are subject to change without
notice. Please consult your Pall representative or visit www.pall.com to verify that this
information remains valid.
Products in this document may be covered by one or more
of the following patent numbers: US5543047; US5690765; US6113784; US7083564;
US7318800; EP0982061; EP0667800; EP1380331.
© Copyright 2016, Pall Corporation. Pall,
, Kleen-Change and UltilKleen are trademarks
of Pall Corporation.
® indicates a trademark registered in the USA. Filtration. Separation. Solution.
is a service mark of Pall Corporation.
MEUKKCENa
March 2016