Lab #10 IMPORTANT: Lab 10 report is due on Dec 5th Wednesday Follow the instruction and procedures in the Student Manual, unless specified differently in this note. Reading: p.229 – 261 in SM Ch. 4.33 – 4.35 in AE Lab #10 10-1 Follow the instruction. You will clearly see the difference between the speed of the LF411 and 311. Try low amplitude and frequency input to see Taj Mahal (e.g. 0.05 Vp-p and 100 Hz). Do you see the Taj Mahal? Try to expand to see the details. Schmitt trigger: Estimate thresholds for on and off, and compare with your measurements. Hysteresis is the difference between two thresholds. 10-2 Follow the instruction. 10-3 Follow the instruction. An alternative astable circuit: try to build a true 50% duty cycle wave. 10-4 Follow the instruction. Look at the waveform on the capacitor. You do not need to use the X 10 probe as suggested by the manual. 10-5 Skip. 10-6 (Wien Bridge) You only need to build the circuit and check the output shape and frequency. Compare with your estimation on the frequency. 10-7 Skip 10-8 Skip