Project Name Page 1 of 94
(FAC 2005-87, March 7th, 2016)
INTEGRATED RESOURCE SERVICE CONTRACT (IRSC) – COMMERCIAL SERVICES
Instructions for use:
•
FAR Clauses have been updated through FAC 2005-87, March 7th, 2016 . Contracting Officers are required to review FAR clause matrix 52.301 and shall make changes as appropriate.
The CO is the signing authority and responsible to ensure the information is up to date and relevant to their project.
•
This is modified commercial requirement – the following template is utilized to keep consistency for the timber industry and meet the requirements specific for stewardship language required under the stewardship authority for the sale of timber products. Assemble stewardship service contracts
(containing retained receipts (SSCC) without product removal) in the same manner as a regular service contract.
•
FAR Clauses have been included for basic commercial services for both IDIQ and stand-alone contracts.
Delete inapplicable clauses. If an equipment rental is anticipated, additional requirements/clauses will need to be added. Refer to FAR clause matrix 52.301(LMV), FAR 7.4, AGAR 408.1103 and
FSH 7103.03. The Contracting Officer must indicate in Block 27 which FAR Clauses are to be incorporated by reference and which clauses are included in the document.
•
Attach the appropriate Appendix A, Technical Specifications for Service Work Activities.
•
Attach the appropriate Appendix B, either Tree Measurement or Scaled.
•
Attach the appropriate Appendix C, Road Maintenance Specifications.
•
Enter Reserved instead of Renumbering Items when clauses/provisions are deleted.
•
Red Type indicates examples of what may need to be edited —the wording provided is not mandatory unless it is a clause. Recommend changing text color from red to black after making edits.
•
Pink Type provides prescriptions for use of specific clauses/provisions and needs to be deleted from final solicitation/contract document, regardless of whether or not the clause/provision is utilized in the document.
•
Comments provide additional commentary or advice. Remove comment/bubble instructions to CO when finalizing document.
•
Double check pagination once all clauses/provisions/comments are added/deleted to assure it makes sense.
•
If a clause is not mandatory, you may exclude. Do not modify clauses without deviation authority.
•
Page breaks were not included (except at the end of sections) because of the information the COR/CO needs to add or delete. So be sure you review your document before finalizing it.
The INTEGRATED RESOURCE SERVICE CONTRACT (IRSC) – will be used for any contract that includes service work and product removal where the contract consists of more service work than product removal. Projects with stewardship funding without product removal use normal service documents but follow coding for FPDS-NG and found in Section 22 of the FSAR.

Project name Solicitation No. Page 2 of 94
SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS
1. REQUISITION NUMBER PAGE 1 OF
OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30
2. CONTRACT NO. 3. AWARD/EFFECTIVE
DATE
4. ORDER NUMBER
7. FOR SOLICITATION
INFORMATION CALL: a. NAME
9. ISSUED BY
, -
Email: @
Phone No.: ( ) - x
CODE
SERVICE-DISABLED VETERAN-
OWNED SMALL BUSINESS
5. SOLICITATION NUMBER 6. SOLICIATION ISSUE
DATE b. TELEPHONE NUMBER(No collect calls)
( ) - x
8. OFFER DUE DATE/
LOCAL TIME
10. THIS ACQUISITON IS
SMALL BUSINESS
UNRESTRICTED OR SET ASIDE % FOR:
WOMEN-OWNED SMALL BUSINESS
HUBZONE SMALL BUSINESS
(WOSB) ELIGIBLE UNDER THE WOMAN-
OWNED SMALL BUSINESS PROGRAM
EDWOSB
NAICS:
11. DELIVERY FOR FOB DESTINATION
UNLESS BLOCK IS MARKED
SEE SCHEDULE
15. DELIVER TO
12. DISCOUNT TERMS
CODE
13a. THIS CONTRACT IS A RATED
ORDER UNDER DPAS (15 CFR 700)
16. ADMINISTERED BY
8(A)
SIZE STANDARD:
13b. Rating
14. METHOD OF SOLICITATION
RFQ IFB RFP
CODE
17A. CONTRACTOR/OFFEROR CODE
FACILITY
CODE
18a. PAYMENT WILL BE MADE BY CODE
, -
Email: @
Telephone No: ( ) - x
DUNS:
Albuquerque Service Center – Miscellaneous Payments
101B Sun Ave N E
Albuquerque, NM 87109
17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER
19.
ITEM N0.
20.
SCHEDULE OF SUPPLIES/SERVICES
STEWARDSHIP PROJECT
18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK
BELOW IS CHECKED
21.
QUANTITY
22.
UNIT
SEE ADDENDUM
23.
UNIT PRICE
24.
AMOUNT
See attached Schedule of items
(Use Reverse and/or Attach Additional Sheets as Necessary)
25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)
27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA
ARE
ARE
ARE NOT ATTACHED
ARE NOT ATTACHED
28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN 29. AWARD OF CONTRACT: REF. OFFER
COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND
DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY
ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED
30a. SIGNATURE OF OFFEROR/CONTRACTOR
DATED , YOUR OFFER ON SOLICITATION
(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE
SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:
31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)
30b. NAME AND TITLE OF SIGNER (Type or print)
/
AUTHORIZED FOR LOCAL REPRODUCTION
PREVIOUS EDITION IS NOT USABLE
30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or print)
/
31c. DATE SIGNED
STANDARD FORM 1449 (REV.2/2012)
Prescribed by GSA - FAR (48 CFR) 53.212

19.
ITEM NO.
20.
SCHEDULE OF SUPPLIES/SERVICES
SEE ATTACHED SCHEDULE OF ITEMS
21.
QUANTITY
22.
UNIT
23.
UNIT PRICE
24.
Amount
Page 3 of 94
32a. QUANTITY IN COLUMN 21 HAS BEEN
RECEIVED INSPECTED ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:
32b. SIGNATURE OF AUTHORIZED GOVERNMENT
REPRESENTATIVE
32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT
REPRESENTATIVE
/
32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE
, -
33. SHIP NUMBER 34. VOUCHER NUMBER 35. AMOUNT VERIFIED
CORRECT FOR
PARTIAL FINAL
38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER
41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT
41 b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41 c. DATE
40. PAID BY
32f. TELPHONE NUMBER OF AUTHORZED GOVERNMENT REPRESENTATIVE
( ) - x
32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE
@
36. PAYMENT
COMPLETE PARTIAL
42a. RECEIVED BY (Print)
42b. RECEIVED AT (Location)
FINAL
37. CHECK NUMBER
42c. DATE RECD (YY/MM/DD) 42d. TOTAL CONTAINERS
STANDARD FORM 1449 (REV.3/2011) BACK

Page 4 of 94
PART I – THE SCHEDULE
SECTION B – SUPPLIES OR SERVICES AND PRICES/COSTS
B.1 GENERAL INFORMATION:
Proposals shall be valid for 60 days after the date of receipt for the solicitation. If additional time is needed, an extension will be requested. Refer to Section L for instructions on preparing your proposal and pricing.
Bonds : Bid Bonds, Payment Bonds, and Performance Bonds are not required for this project.
All Contractors must be actively registered in the System for Award Management (SAM) (https://SAM.gov) to be eligible for award under this solicitation. If not actively registered by time of proposal evaluations, you will be found non-responsive. Registration in SAM is a free service – you do not need to pay to register in this system. If your registration is not active, you will not be considered for award.
B.2 SCHEDULE OF ITEMS
B.2.1 MANDATORY WORK ACTIVITIES:
ITEM
NO.
1
2
3
4
5
Contractor Name
DESCRIPTION OF
MANDATORY WORK ACTIVITIES UNIT
ESTIMATED
QUANTITY
UNIT
PRICE
$
$
$
$
$
TOTAL
$
$
$
$
$
Total All Mandatory Service Items $
B.2.2 OPTIONAL WORK ACTIVITIES:
ITEM
NO.
1
2
3
4
5
Contractor Name
DESCRIPTION OF
OPTIONAL WORK ACTIVITIES UNIT
ESTIMATED
QUANTITY
UNIT
PRICE
$
$
$
$
$
TOTAL
$
$
$
$
$
Total All Optional Service Items $
B.2.3 TIMBER/PRODUCT REMOVAL PRICE SCHEDULE:

SPECIES PRODUCT QUANTITY
UNIT OF
MEASURE
MINIMUM
ACCEPTABLE
OFFER
OFFER
(FLAT)
$
$
Page 5 of 94
TOTAL
OFFER
$
$
Total – All Products $
Note: These schedules are for pricing/payment purposes. See Instructions to Offerors for business proposal requirements.
NOTE: Price Proposals MUST be provided on ALL Items in Schedules: Mandatory Work and
Option Work Activities and Timber or other products Removal Price Schedule. Unit prices prevail.
B.3 LAND MANAGEMENT ACTIVITIES.
Performance of land management activities shall be in accordance with Section C – Project Description and
Work Specifications. Payment for Land Management Work Activities in Schedule B-2.1
will be made in
Stewardship Credits in lieu of cash, as defined in Section G. All Base Work Activities shall be performed.
Option activities are listed in order of planned priority. Award may be made for option items in any order that the Contracting Officer determines is in the best interest of the Government.

SECTION C – DESCRIPTION/ SPECIFICATIONS/STATEMENT OF WORK
C.1 AGAR 452.211-72 Statement of Work/Specifications (FEB 1988)
Page 6 of 94
The Contractor shall furnish the necessary personnel, material, equipment, services and facilities (except as otherwise specified), to perform the Statement of Work/Specifications referenced in Section J.
C.2 Project Description
(a) Description of Work – The Dark Meadow Restoration Project is located on the La Grande Ranger
District of the Wallowa-Whitman National Forest encompassing the area indicated on the Project Area Map
(which includes Contract Area Maps) within Dark Canyon Creek drainage to the east and McIntyre Creek drainage to the west. Restoration objectives for the project area are summarized as follows:
•
Improve Forest Health – Provide growing space for healthy trees and reduce fuel loadings
•
Reintroduce Fire – Provide mechanical fuel treatments and preparatory work to manage the effects of the return of fire as a disturbance mechanism.
•
Increase and Improve Late/Old Forest Structure – Provide maintenance of designated Old
Growth Areas and forest components which trend to historic vegetation and habitat conditions
(snags, down wood, cover, etc.).
•
Improve soil and aquatic conditions – Provide for soil and riparian function and productivity.
Provide timely soil erosion control measures and restorative work.
•
Utilize Timber or other products – Provide wood resource to forest product industry.
•
Improve Road Management – Provide maintenance and obliteration to meet project area transportation plan and resource needs.
To accomplish these objectives, the contract includes the following components: stand cleaning/thinning, mechanical fuels reduction, fire line installation, snag and down wood management, Old Growth Treatment – non-commercial cleaning/thinning, and piling of fuels, timber or other products removal, sub soiling, road work and water source development.
(b) Resulting Contract – Any resultant contract will be a commercial services contract with requirements for timber removal.
(c) Project Location – Project is located in Township 2 South, Range 35 East, Sections 19, 20, 21, 22,
23, 24, 26, 27, 28, 29, 30, 31, 32, 33,34 and 35; Township 3 South, Range 34 East, Section 25; Township 3
South, Range 35 East, Sections 2, 3, 4, 5, 7, 8, 9, 10, 11, 12, 13, 14 and 15.
C.3 Specifications
Specifications for each Stewardship Activity individually described by an item number in Schedule B pages can be found in Appendix A. Specifications for timber removal can be found in Appendix B. Road Maintenance plans and specifications can be found in Appendix C.
C.4 Contract Area Map
The boundaries of Subdivisions or Payment Units and any cutting units thereof, are as shown on the attached
"Contract Area Map," which is made a part hereof, and were, before solicitation, designated on the ground by
Forest Service to meet the anticipated needs of the parties. The location of the Subdivisions or Payment Units and their approximate acreage are stated in Division A/AT. Subdivisions or Payment Units may be revised and additional ones may be established only by written agreement of both parties. Where applicable, the following are also identified on Contract Area Map:
(a) Identified claims limiting Contractor's rights;
(b) Boundaries of cutting units;

Page 7 of 94
(c) Areas where leave trees are marked to be left uncut;
(d) Roads listed
(e) Sources of base course, rock riprap and surface rock;
(f) Roads where log hauling is prohibited or restricted;
(g) Roads and trails to be kept open;
(h) Improvements to be protected;
(i) Locations of known historical sites;
(j) Maximum stump heights when more than one height is listed by areas;
(k) Skidding or yarding methods specified;
(l) Streamcourses to be protected;
(m) Other features required by Appendix B; and
(n) Boundaries of stewardship work activities.
C.5 Government-Furnished Property
The Government will provide the following item(s) of Government property to the Contractor for use in the performance of this contract. This property shall be used and maintained by the Contractor in accordance with the provisions of the "Government Property" FAR clause(s) contained in Section I of the contract.
Description of
Property
• x
Value Quantity Return/Consumable
C.6 Operating Plan and Schedule:
The Contractor will provide a detailed timeline of when the contract requirements will be accomplished while conforming to the requirements within Section F.5. The operating plan should indicate the sequence of activities that will take place to accomplish the tasks described within the solicitation, Appendix A, Appendix
B, Appendix C, and Appendix D including proposed start and completion dates. The operating plan and schedule should contain the following elements:
•
A list of employees/personnel working on this contract identifying each by the Occupational Code/Job
Title for the work as it applies to this contract under the applicable Service Contract Act wage rate.
•
All Subcontractors must also provide a list of all employees/personnel working on this contract identifying each by their Occupational Code/Job Title as it applies to this contract under the applicable
Service Contract Act wage rate.
•
A proposed communication plan regarding findings, progress, information exchange, questions, and concerns of both parties.
Depending upon how the contractor proposes accomplishing the activities within the solicitation, the Operating
Plan and Schedule may be developed by indicating when and how all work activities within individual units will be completed, when and how individual tasks will be completed, or a combination of when and how units or tasks will be completed. The contractor should be able to display through an operating plan and schedule that all of the contract activities will be accomplished in a timeline that will meet the contract requirements.
Key Personnel

Page 8 of 94
{Describe positions which are considered key to successful performance of the contract and the information required to support key personnel qualifications, e.g., experience which correlates to SOW requirements, education (if applicable).
The follow personnel are considered key personnel by the government: [ Insert the titles of the key personnel i.e., operations manager, logging supervisor, fuels treatment supervisor etc.
] The contractor shall provide a
[e.g. project manager] who shall be responsible for the performance of the work. The name of this person and an alternate who shall act for the contractor when the manager is absent shall be designated in writing to the contracting officer. The [project manager] or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract. The contract manager or alternate shall be available between [ Insert the hours, i.e., 8:00 a.m. to 4:30p.m.
], Monday thru Friday except Federal holidays or when the government facility is closed for administrative reasons. Qualifications for all key personnel are listed below:
[ Insert the qualifications for all key personnel, i.e., the government desires that the project manager and
Alternate have___ years of experience in____; and ______. The logging supervisor should have at least____
years of experience
C.7 Sustainable Acquisition
The Contractor shall comply with the Agricultural Act of 2014; the Food, Conservation and Energy Act of 2008
(FCEA), 7 U.S.C. 8102; the Farm Security and Rural Investment Act of 2002 (FSRIA), 7 U.S.C. 8102; the
Federal Acquisition Regulation; Executive Order (EO) 13514, “Federal Leadership in Environmental, Energy and Economic Performance,” dated October 5, 2009; EO 13423, “Strengthening Federal Environmental,
Energy, and Transportation Management,” dated January 24, 2007; and Presidential Memorandum, “Driving
Innovation and Creating Jobs in Rural America through Biobased and Sustainable Product Procurement,” dated
February, 2012 to provide biobased products.
In compliance with FAR Part 23.4 through performance of this contract, the Contractor shall make maximum use of EPA designated and USDA designated biobased in accordance with FAR clause 52.223-2 Affirmative
Procurement of Biobased Products under Service and Construction Contracts and 52.223-17 Affirmative
Procurement of EPA-designated Items in Service and Construction Contracts
The Contractor shall utilize products and material made from biobased materials (e.g. biobased greases, biobased hydraulic fluids, biobased absorbents) to the maximum extent possible in the performance of this contract without jeopardizing the intended end use or detracting from the overall quality delivered to the end user. All supplies and materials shall be of a type and quality that conform to applicable Federal specifications and standards. Information about this requirement and a catalog of products are available at the BioPreferred
Web Site.
The Contractor shall utilize products and material to the maximum extent possible in the performance of this contract from EPA’s list of designated products and the accompanying recommendations for post-consumer content and recovered materials content in the following eight categories: Construction products, Landscaping products, Nonpaper Office Products, Paper and Paper Products, Park and Recreation products, Transportation
Products, Vehicular Products, and Miscellaneous Products.
Compliance with the USDA Biobased requirements requires Contractors to report the purchase of biobased products under service and construction contracts through the System for Award Management
(https://SAM.gov) and provide a copy of the report to the Contracting Officer.
7.1
Sustainable products identified for this solicitation:

Page 9 of 94
The following is a list of categories for biopreferred products and EPA products that that may be used i n t h e performance of this contract. The list is not all inclusive; the Contractor shall research for available products.
7.1.1 BioPreferredProducts: a Diesel Fuel Additives
(1) Any substance, other than one composed solely of carbon and/or hydrogen, that is intentionally added to diesel fuel (including any added to a motor vehicle's fuel system) and that is not intentionally removed prior to sale or use.
(2) Neat biodiesel, also referred to as B100, when used as an additive. Diesel fuel additive does not mean neat biodiesel when used as a fuel or blended biodiesel fuel (e.g., B20). 90% -
Minimum Biobased Content. b Hydraulic Fluids - Mobile Equipment
Hydraulic fluids formulated for general use in nonstationary equipment, such as tractors, end loaders, or backhoes. 44% - Minimum Biobased Content. c Penetrating Lubricants
Products formulated to provide light lubrication and corrosion resistance in close tolerant internal and external applications including frozen nuts and bolts, power tools, gears, valves, chains, and cables. 68% - Minimum Biobased Content. d Greases - Truck
Lubricants composed of oils thickened to a semisolid or solid consistency using soaps, polymers or other solids, or other thickeners. Lubricants that are designed for use on the fifth wheel of tractor trailer trucks onto which the semi-trailer rests and pivots. 71% - Minimum Biobased
Content. e Gear Lubricants
Products, such as greases or oils, that are designed to reduce friction when applied to a toothed machine part (such as a wheel or cylinder) that meshes with another toothed part to transmit motion or to change speed or direction. 58% - Minimum Biobased Content. f Fuel Conditioners
Products formulated to improve the performance and efficiency of engines by providing benefits such as removing accumulated deposits, increasing lubricity, removing moisture, increasing the cetane number, and/or preventing microbial growths within the fuel system. 64% - Minimum
Biobased Content. h Erosion Control
Woven or non-woven fiber materials manufactured for use on construction, demolition, or other sites to prevent wind or water erosion of loose earth surfaces, which may be combined with seed and/or fertilizer to promote growth. 77% - Minimum Biobased Content. g 2-Cycle Engine Oils
Lubricants designed for use in 2-cycle engines to provide lubrication, decreased spark plug fouling, reduced deposit formation, and/or reduced engine wear. 34% - Minimum Biobased
Content.
7.1.2 EPA Designated Products:
Plastic trash bags, printer ribbons, toner cartridges, print & writing papers, Traffic Barricades,
Traffic Cones, Engine Coolants, Rebuilt Vehicular Parts, Re-refined lubricating oils, retread tires, manual grade strapping, signage, sorbents.
C.8 Definitions

Page 10 of 94
Acceptable Quality Level: The allowable leeway or variance from a standard before the government will reject the specific service. An AQL does not say that the contractor may knowingly offer defective service.
It implies that the government recognizes that defective performance sometimes happens unintentionally.
As long as the percent of defective performance does not exceed the AQL, the service will not be rejected by the government. The contractor, however, must re-perform the defective service when possible.
Biobased Products: See Sustainable Acquisitions
Contracting Officer (CO): Individual with authority to bind the government with their signature on the contract.
Contracting Officer Representative (COR): Individual(s) designated to act on the behalf of the CO within the delegation given them in writing.
Period of performance (also Performance period or Contract time): All calendar days allowed for completion of contract work. Includes all days of the week including weekends and holidays.
Quality Assurance: Those actions taken by the government to check goods or services to determine that they meet the requirements of the SOW.
Quality Assurance Surveillance Plan (QASP): An organized written document used for quality assurance surveillance. The document contains information about how the government will assess performance, checklists, and may contain decision tables.
Quality Control : Those actions taken by a contractor to control the production of goods or services so that they will meet the requirements of the Performance Statement of Work. Refer to Inspection and Acceptance in clause 52.212-4 and Contractors Quality Control Plan as described in Section E.
Quality Control Plan: Contractors plan for self-monitoring work prior to Government inspection and acceptance. See Section E.
Random Sampling : A method of looking at a few individual items in a lot to determine the quality of that lot against a standard.
(Acceptable) Service : A job performed to the standard and within the acceptable quality level. The contractor must do the specific job, and meet the standard, and meet the acceptable quality level before one can say that performance has been acceptable and that he/she should be paid.
Standard : An acknowledged measure of comparison.
Stewardship Contracting : An exchange of goods/products for services including construction.
Sustainable Acquisitions (FAR Part 23.4 – Use of recovered materials and biobased products) a.
Biobased Products: Managed by the U.S. Department of Agriculture (USDA), the goal of the
BioPreferred program is to increase the purchase and use of biobased products. The BioPreferred program was created by the 2002 Farm Bill and reauthorized and expanded as part of the
Agricultural Act of 2014 (the 2014 Farm Bill). The program's purpose is to spur economic development, create new jobs and provide new markets for farm commodities. The increased development, purchase, and use of biobased products reduce our nation's reliance on petroleum, increase the use of renewable agricultural resources, and contribute to reducing adverse

Page 11 of 94 environmental and health impacts. Information on biobased/biopreferred products can be found at the BioPreferred Site . The Contractor shall comply with the clause at FAR 52.223-2,
Affirmative Procurement of Biobased Products Under Service and Construction Contracts and the provision at FAR 52.223-1, Biobased Product Certification. b. EPA-designated items: Products that are or can be made with recovered material. The
Comprehensive Procurement Guideline (CPG) program is part of EPA's continuing effort to promote the use of materials recovered from solid waste. Buying recycled-content products ensures that the materials collected in recycling programs will be used again in the manufacture of new products. See FAR 52.223-17 Affirmative Procurement of EPA-designated items in Service and Construction Contracts.
C.8.1 Technical Definitions – See Appendices.

SECTION D – PACKAGING AND MARKING
There are no clauses in this section.
Page 12 of 94

Page 13 of 94
SECTION E - INSPECTION AND ACCEPTANCE
General Clauses and Provisions Pertaining To All Items
E.1 52.252-2 Clauses Incorporated by Reference (FEB 1998)
This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://www.acquisition.gov/far
FEDERAL ACQUISITION REGULATION (48 CFR CHAPTER 1) CLAUSES
E.2 Contractor Quality Control Inspection System
The Contractor shall identify the quality control inspection system it will use to ensure that contract specifications will be achieved. At no time shall the contractor rely upon Government inspections to provide notification of unsatisfactory performance. The Contractor shall produce written inspection records in a format and at times and places satisfactory to the Contracting Officer. Inspection records shall be made available upon request of the Contracting Officer and be maintained until the date of contract closure. The Contracting Officer may observe the Contractor's inspection at any time and shall otherwise have unlimited access to the inspection data.
E.2.1 Quality Control Plan. The Contractor shall provide a general Quality Control Plan (QCP) with the technical proposal. The Contractor shall supplement the QCP within 7 days before start work based on items awarded to the Contractor and Government comments.
The contractor shall conduct quality control inspections on all aspects of work. The field inspections shall be performed on each sub-item listed in each task order.
The general Quality Control Plan must demonstrate how the Contractor will assure quality meets the requirements and specifications of the contract. The Plan shall describe how quality will be monitored to assure the performance standards are met, the supervision of crew and work, and personnel that will be performing the quality control. Quality control shall include monitoring quality while work is in progress, residiual tree care and other associated tasks, an unbiased sample of ……. a) Thinning Sub-items.
1.
E.2.2 Contractor Quality Control Inspection At no time shall the contractor rely upon Government inspections to provide notification of unsatisfactory performance. The Contracting Officer may observe the
Contractor's inspection at any time and shall otherwise have unlimited access to the inspection data.
Inspection procedures must provide the following information:
E.2.2.1 Plot Inspections.
Where the unit of measure is per acre, the Contractor shall maintain a plot system that provides an unbiased sample of …
The plot system shall be consistent with method of work. The Contractor shall sample at least 1percent of the unit, with a minimum of 5 plots per ____ acres unit. a) Plots shall be marked and identifiable on the ground, this includes plot numbers and visible flagging.

Page 14 of 94 b) The Contractor shall provide inspection sheets and a sketch map of the unit with plot locations to the Government. Inspection sheets shall be signed and dated by the person who conducted the inspection and shall certify that the inspection records are complete and accurate.
E.3 Acceptance
The Contractor’s shall provide a written request for inspection and submit inspection sheets in accordance with the QCP. The Government will conduct an inspection and up to one re-inspection for each unit. If the contractor fails to meet the minimum AQL, the contractor shall rework the unit. Anytime more than two inspections are required per unit, the contractor may be assessed for additional inspections, which will include mileage and hourly rate of the COR. If follow-up inspections indicate that the minimum AQL was not met, the work will be deemed unsatisfactory and a deduction in payment may result (Section G-3.4).
Acceptance may be made for all or portions of work.
E.4 Government Quality Assurance Surveillance Plan
Quality assurance specific to individual items will be found in Appendix A.

Page 15 of 94
SECTION F - DELIVERIES OR PERFORMANCE
General Clauses and Provisions Pertaining To All Items
F.1 52.252-2 Clause Incorporated by Reference (FEB 1998)
This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this address: http://www.acquisition.gov/far
FEDERAL ACQUISITION REGULATION (48 CFR CHAPTER 1) CLAUSES
52.242-15 Stop-Work Order (Aug 1989)
52.247-55 F.O.B. Point for Delivery of Government-Furnished Property (JUN 2003) (Govt furnishes property and arranges & pays for transportation)
F. 2 Commencement, Prosecution, and Completion of Work
The Contractor shall be required to (a) commence work under this contract in accordance with the accepted operation plan; starting work when the Contractor receives the Notice to Proceed, (b) prosecute the work diligently, and (c) complete the entire project including final cleanup of the premises by ____________.
F.2.1 Additional information for Issuance of Task Orders
Performance shall be made only as authorized by orders issued in accordance with the Ordering clauses.
Except as this contract otherwise provides, the Government shall order all services within the scope that are required by Government activities specified in the Schedule only with the vendor holding this contract for the specified services. Timber or other products Removal activities shall be scheduled and carried out in accordance with the Timber or other products Removal Specifications in Appendix B and as approved by the Contracting Officer.
F.2.2 Estimated start work date.
It is estimated that work will begin as addressed in the task order. Actual date is negotiable based upon actual award date, prospective work and weather conditions.
See Section F.4 below for special contract time and performance restrictions concerning the performance of work on this contract. Additional restrictions on the Scheduling of Work for resource protection, etc. may be addressed in the Technical Specifications.
F.3 AGAR 452.211-74 Period of Performance (FEB 1988)
The effective period of this contract is from through .
(End of Clause)
F.4 Special Contract Time and Performance Restrictions
The Contractor shall perform this contract according to the following restrictions. Additional performance restrictions may also be found in the Technical Specifications and/or on contract maps.
Contract Item or Area Description Description of Restriction

ALL CONTRACT AREAS
Page 16 of 94
The Contractor shall not perform required road decommissioning services sooner than 18 months after Contracting Officer acceptance of slash piling, unless otherwise approved in writing by the Contracting
Officer. This restriction is to allow the Government the opportunity to burn landing piles after they have cured.
Cache Creek Trailhead
Owl Creek and Hyde Creek Fuels
Reduction Units
Access to Cache Creek Trailhead via Road 17442 shall remain open to the public between the dates of July 15 – December 1 (inclusive). (This is the access to Units 7 and 12)
May 1 st – July 15 th : Operations prohibited.
Dec. 1 st – June 15 th : Operations prohibited.
O’Neil Creek Culvert Removals Culvert Removals in O’Neil Creek shall only be performed from July
15 th
– September 1 st
unless specifically authorized in advance, in writing, by the Contracting Officer. Note: The CO does not anticipate approving performance outside of the timeframe stated here.
F.5 Schedules and Reports
Contractor shall provide the following submittals as stated below unless otherwise mutually agreed upon. The
Contractor shall update all submittals as needed, or as required by the CO, but in no case less than once per calendar year on a date specified by the Contracting Officer:
ITEM DESCRIPTION
Proposed Operation Plan (Overall Schedule): The Contractor shall prepare and submit two copies (or one electronic copy) of a practicable schedule showing the order in which the Contractor proposes to perform the work, and the starting and completion dates of various phases of the work. The schedule shall comply with the contract time requirements in the contract (or
Task Order), including, but not limited to Paragraphs F.2 and F.5
. The schedule shall be provided in either 8.5’x11’ or 11’x17’ format.
Subcontractors: List of proposed sub-contractors and their intended work.
Sub-contractors must have Contracting Officer’s written approval prior to starting work on the project.
Traffic Control Plan. The Contractor shall prepare and submit a Traffic
Control Plan detailing conformance with OSHA requirements, MUTCD requirements, and all other contract requirements, including, but not limited to Paragraph H.9
, “Traffic Control Plan” and the requirements included in the
Appendices, if any.
Soil Erosion and Water Pollution Control Plan. The Contractor shall prepare and submit an Erosion Control Plan detailing permanent and temporary control measures to minimize erosion and sedimentation during and after contract performance. Plan shall conform to all contract requirements, including but not limited to Paragraph H.5
, “Erosion Prevention and
Control”, and the requirements in the Appendices, if any.
Safety Plan. The Contractor shall comply with the requirements of FAR
52.236-13 – Accident Prevention, for all activities under this contract.
( Paragraph I.2
)
Quality Control Plan. Submit original with proposal. Any updates need to be provided for approval to the CO. Refer to E.2
SUMBITAL
DUE
With
Proposal
With
Proposal
10 days after issuance of
Notice to
Proceed
10 days after issuance of
Notice to
Proceed
With
Proposal
With
Proposal
COPIES
REQUIRED
2
2
2
2
1
2

Designation of Contractor personnel describing responsibilities and authorities
BioBased Report. Submit annually. Refer Section C.7
At prework
Meeting
October 31
Page 17 of 94
2
All schedules and reports shall be submitted to the Contracting Officer’s Representative identified by the CO, unless the Contracting Officer directs the Contractor to submit any schedules or reports directly to the CO.

Page 18 of 94
SECTION G – CONTRACT ADMINISTRATION DATA
General Clauses Pertaining To All Items
G. 1. Ordering Procedure - Issuance of Task Orders
Task Orders will be issued in accordance with FAR 52.216-18, FAR 52.216-19, FAR 52.216-22 and AGAR
452.216-73.
Warranted Contracting Officers are authorized to place task orders against this contract within their delegated warrant authority.
1.
2.
Contracting Unit
(Name) Contracting Zone/Area/Province
(Name) National Forest
Contracting Officer(s)
Individual Name(s) or “All COs within the limits of their warrant.”
Copies of all Task Orders and any modifications issued will be submitted to: . Task Order amounts will be tracked to ensure the ceiling amount of the contract is not exceeded.
The Task Order will address specific requirements of a project, schedule of items, specific supplemental specifications within the Scope of the Work, specific site locations, and may include seasonal limitations and resource protection requirements in addition to those listed in Section H. Task Orders: a) may be issued by facsimile or by electronic commerce methods. The Contracting Officer will email the “E-mail Request for Quotation”, Task Order supplemental specifications, and maps to the contractors. b) will be issued during the performance period of this contract. c) will be issued to those individuals awarded a contract under this program of work. d) will include the required due date, specific instructions for the submission for quotes, and other information deemed appropriate. e) will be competitive in nature.  All contractors who are awarded a contract will be required to submit a quote on every task order
.  If a contractor cannot meet the “Desired Start Date” and the
“Contract Completion Time” identified by number of calendar days referenced on the task order, an alternate schedule can be submitted by the contractor and will be considered for award. f) will generally allow 5 working days for contractors to prepare and submit quotes.  However, more or less time may be necessary based on the requirements and will be stated in the task order. The Contractor is encouraged to visit the site.  The Contractor will email their quote on the
“Email Request for Quotation” response form to CO by due date and time indicated therein.  If the emailed electronic .pdf versions of the Task Order maps are inadequate, larger maps can be provided to each contractor if pre-arranged. g) will be issued on a firm-fixed-price basis.
The following procedures will be utilized to provide awardees a fair opportunity in accordance with FAR Part
16.505(b).  Method for selecting a contractor to award a task order will be in descending order as shown in “a” through “c” below for each task order exceeding the minimum order amount. a) Exceptions to the fair opportunity process as provided by FAR 16.505(b)(2). If a Fair Opportunity
Exception applies, the task order quote request will be issued to one contractor.

Page 19 of 94
Note: At certain times during the contracting period, there may be a need for the Forest Service to issue multiple Task Orders on or about the same date.
If contractors’ capacity capabilities indicate that they are currently performing at their individual capacity levels on this contract (determined through consultation with the contractors), the Contracting Officer may decide to forgo the customary procedures for re-competition and negotiate directly with one contractor.
b) The Government will determine the best value based on price, timeframe, and past performance.
Single or multiple awards may be made for individual task orders, as specified on the task order. The
Contracting Officer selects contractor based upon the following:
1.
The contractor will be given the opportunity to quote on the individual task orders.   Contractors cannot exceed the “maximum” price quoted as shown in their master contract awa rded schedule.
The Contractor may provide lower pricing than the “maximum price.” The Task Order pricing should include all associated costs for requested work (you will now have a location and the actual work required for this task to price the work acco rding to the needs of the task). Lower prices enhance the chances to be awarded a task order. i. Failure to provide quotes on issued task orders will be considered under past performance.
Failure to respond to three consecutive orders may result in contract termination.
2. Alternate timeframes for each individual task order may be suggested by the Contractor (this allows you the flexibility to schedule your work to ensure you can meet task order timeframes). The
Government may award at a higher price between the contractors if the alternate timeframe does not meet government’s need.
3. Past performance on earlier task orders under the resultant contract including quality and timeliness.
This is a critical factor not only for each task order but also as consideration to exercise the option periods. Positive past performance will assure continued ability to receive task orders.
Marginal or unsatisfactory performance may be factored in the award decision of individual task orders. c.
The Contracting Officer will email the task order award document with confirming Task Order delivery time frame to successful Contractor and the COR.
d.
The Contracting Officer will notify unsuccessful contractors of the final award decision.
Ombudsman Description.
In accordance with FAR 16.505(a)(8), no protest under FAR subpart 33.1 is authorized in connection with the issuance or proposed issuance of a Task Order under this contract, except for a protest on the grounds that a task order increases the scope, period, or maximum value of the contract. The
Ombudsman will review complaints from the contractors and ensure that all contractors are afforded a fair opportunity to be considered consistent with the procedures in the contract. Complaints to the USDA Forest
Service Ombudsman must be forwarded to:
Assistant Director for Operations,
Acquisition Management, Washington Office
Rosslyn Plaza
1621 N Kent Street, Plaza E, Suite 707
Arlington, VA 22209
Phone (703) 605-4665
Facsimile (703) 605-5100

Page 20 of 94
G.2 Measurement
All linear and area measurements under this contract are measured on a horizontal plane.
G.3 Payment
It is anticipated that funds will be exchanged in the performance of this contract because the value of the timber or other products will not completely offset the value of the work to be performed. Payment shall only be made under this clause to the extent that the work performed will not be offset by the timber or other products value during the contract period. When payment is made to the contractor for work performed, it will be made in accordance with FAR 52.212-4 Contract Terms and Conditions-Commercial Items (i) – Payments and 52.232-
33 Payment by Electronic Funds Transfer – System for Award Management (See clause 52.212-5). Submit certification G.8 with all invoices.
Invoices are to be submitted to:
The value of work completed and timber or other products removed will be documented in a Stewardship
Statement of Account produced by Timber Sale Accounting (TSA) monthly when harvesting operations are underway.
G.3.1 Payment Reductions
G.3.1.1 Payments for tasks meeting stated minimum AQL or above
The Government expects to receive quality services. The minimum AQL is required to achieve a satisfactory performance rating. Full payment will be made for final work meeting at least identified
AQL and above (As identified in Appendix A, Section VII.)
G.3.1.2 Payments for task with AQL between 1% and 10% below minimum AQL
If the task deliverable cannot or will not be reworked to achieve the minimum required AQL, payment of 90% of the unit price will be applied to tasks falling between 1% and 10% below identified AQL.
Example - 90% AQL is achieved on task with 95% AQL requirement (5% below minimum AQL.) Unit price is $10,000.00
10,000 x 90% = 9,000 price to be paid for unit.
G.3.1.3 Payments for task with AQL between 11% and 20% below minimum AQL
If the task deliverable cannot or will not be reworked to achieve the minimum required AQL, payment of 90% of the unit price will be applied to tasks falling between 11% and 20% below identified AQL.
Example - 75% AQL is achieved on task with 95% AQL requirement (20% below minimum
AQL.) Unit price is $10,000.00
10,000 x 90% = 9,000 x 75% = $6,750.00 price to be paid for unit.
G.3.1.4 Payments for tasks with AQL below 21% minimum AQL
If the task deliverable cannot or will not be reworked to achieve the minimum required AQL, payment of 80% of the unit price times the actual AQL received will be made for AQL falling below 21% required AQL.

Page 21 of 94
Example - 70% AQL is achieved on task with 95% AQL requirement (AQL is 25% below minimum
AQL.) Unit price is $10,000.00
10,000 x 80% = 8,000 x 70% = $6,400.00 price to be paid for unit.
G.3.2 Re-Inspection Costs
If rework of task(s) is required, the Contractor will be assessed the costs incurred by the Government in performing such activities. One inspection will be authorized at each of the draft stages and one at the final report stage.
•
Any resubmittals of drafts will be re-inspected and will accrue re-inspection costs.
•
If final report requires rework the resubmittal will be re-inspected and will accrue re-inspection costs.
The table below lists charge rates for Government re-inspection of work.
Activity Charge rate
Government wages
(per employee performing reinspection)
$50.00/hour
*Government mileage
$0.575/mile
*Mileage reimbursement rate in effect January 1, 2016 is $.54 per mile. Mileage rates change periodically and the most current mileage rates for assessed damages at the time will be used. Most current mileage rates can be found at the General Services Administration website GSA Mileage.
G.3.3 FINAL PAYMENT - RELEASE OF CLAIMS
The Government shall pay the amount due the Contractor under this contract after—
(1) Completion and acceptance of all work;
(2) Presentation of a properly executed invoice; and
(3) Presentation of release of all claims against the Government arising by virtue of this contract, other than claims, in stated amounts, that the Contractor has specifically excepted from the operation of the release.
G.4 Incidental Payment Items
The intent of the contract is to provide for the complete performance of the project described in the contract.
Unless otherwise provided, the Contractor shall furnish all labor, materials, equipment, tools, transportation, and supplies and perform all work required to complete the project in accordance with drawings, specifications, and provisions of the contract. Payment for contract work will be made only for and under those pay items included in the Schedule of Items. All other work and materials will be considered as incidental to and included in the payment for items shown.
G.5 Product Payment Guarantee
To guarantee payment for product in advance of cutting, Contractor may earn Stewardship Credits in advance of cutting, or provide a product payment guarantee in the form of an acceptable surety payment bond,

Page 22 of 94 irrevocable letter of credit (ILOC), cash, or a deposit in a Federal Depository negotiable securities of the United
States.
Any earned stewardship credits and product payment guarantee together will maintain a minimum unobligated balance equal to the applicable charges for product the Forest Service estimates will be cut or removed in not less than 30 calendar days and not more than 60 calendar days, plus the value of any outstanding charges for product removed.
Any earned stewardship credits and product payment guarantee together will maintain a minimum unobligated balance equal to the total value of product that has not been paid for from stewardship units released for cutting.
Securities shall be deposited through the Contracting Officer accompanied by a power of attorney and agreement authorizing the bond-approving officer to sell or collect such securities if payment is not made within
15 days of billing by Forest Service. The penal sum of such surety bond or the market value at time of deposit of such negotiable securities shall be the maximum amount of the payment guaranteed.
Product payment guarantee for a single contract shall be provided utilizing Form FS6500-12 Payment Bond.
Blanket Payment Bond: a.
Contractor may furnish an acceptable bond, or deposits securities, to guarantee payment for product from multiple contracts. Contractor shall not start cutting hereunder until this contract receives an allocation that will meet the obligation for product payment guarantee. b.
The amount of such bond or deposited securities shall be allocated to such contracts by the Forest
Service. The Contractor shall provide the contact information for the Forest Service representative administering the blanket payment bond to the Contracting Officer. The Forest Service representative administering the blanket payment bond will provide the Contracting Officer with documentation showing the allocation to this contract. c.
When there is to be no product cutting or removal hereunder for 30 days or more and payment of current charges has been made, the allocation to this contract may be reallocated to other contracts at
Contractor’s request. d.
Payment guaranteed with acceptable blanket payment bond for multiple contracts shall be provided utilizing Form FS-6500-12a Blanket Payment Bond.
G.6 Stewardship Credits
Stewardship Credits are credits that are earned and established when work listed in the B.1 Schedule of
Supplies/Services has been performed and accepted. Stewardship credits shall be earned at the rate as shown in the Schedule. Earned credits may be used to pay for timber or other products value included in Schedule B.2.
Unless otherwise indicated in the Schedules, credits will be earned based upon Actual Quantities accomplished and accepted.
G.7 Establishment of Stewardship Credits
Notwithstanding references to payments in “Payment” clauses of this contract, payment for Stewardship
Activities will be made with Product Value or other funding as indicated in the award document.
Stewardship Credits will be established on a monthly basis. Stewardship credits will be established for the number of units of each activity that have been completed and accepted. Acceptance may be for all, or a reasonable portion of, any specific activity.

Page 23 of 94
Stewardship credits will not be established for work that is in progress that has not been accepted by the Forest
Service. No credits will be established for work performed under terms of Schedule B.2.3.
G.8 Contractor Certification
Contractor will submit certification with every invoice and monthly, as Stewardship Credits are established.
The Contractor shall furnish the following certification indicating if for invoice, stewardship credit or both.
Credit will not be received if certification is not submitted.
CONTRACTOR CERTIFICATION
- Invoice and/or Stewardship Credit Earned
Unit ( Region, Forest, District ) Project:
Page of
Contract No.
Name and Address of
Contractor:
Invoice No. Invoice Date:
,
I hereby certify, to the best of my knowledge and belief, that--
(1) The amounts requested are only for performance in accordance with the specifications, terms, and conditions of the contract;
(2) Payments to subcontractors and suppliers have been made, and timely payments will be made for the work activities covered by this certification, in accordance with subcontract agreements and the requirements of Chapter 39 of Title 31, United States Code;
(3) This request for progress payments/credits does not include any amounts which the prime contractor intends to withhold or retain from a subcontractor or supplier in accordance with the terms and conditions of the subcontract; and
(4) This certification is not to be construed as final acceptance of a subcontractor's performance.
(Name)
(Title)
(Date)
G.9 Excess Stewardship Credits
In the event there are excess (unused) established Stewardship Credits when all of the included timber or other products has been cut and removed the Forest Service, at its option, shall either add more timber or other products or make cash payment for the unused credits.
G.10 Excess Timber or Other Products Value

Page 24 of 94
In the event the value of the included timber or other products exceeds the total value of all of the mandatory activities plus the ordered optional activities, the Contractor shall make cash payment for the excess timber or other products value.
G.11 Refund of Excess Cash
If at any time the credit balance of the Stewardship Statement of Account exceeds the charges for timber or other products removed to date and for timber or other products that the Forest Service estimates will be cut within the next 60 calendar days, any portion of such excess from cash in the account shall be refunded if requested by Contractor. If no cutting is planned within the next 60 calendar days, refund of the entire unencumbered cash balance may be made. After a refund, deposits shall be made to meet the requirements of the clause entitled, “PRODUCT PAYMENT GUARANTEE” before additional timber or other products may be cut.

Page 25 of 94
SECTION H - SPECIAL CONTRACT REQUIREMENTS
General Clauses and Provisions Pertaining To All Items
H.1 AGAR 452.215-73 Post Award Conference (NOV 1996)
A post award conference with the successful offeror is required. It will be scheduled within __ days after the date of contract award. The conference will be held at the _______________ , and will include discussion of contract terms and work performance requirements, work progress schedule and fire prevention/suppression and safety plans.
(End of Clause)
H.2 AGAR 452.236-72 Use of Premises (NOV 1996)
(a) Before any camp, quarry, borrow pit, storage, detour, or bypass site, other than shown on the drawings, is opened or operated on USDA land or lands administered by the USDA, the Contractor shall obtain written permission from the Contracting Officer. A camp is interpreted to include a campsite or trailer parking area of any employee working on the project for the Contractor.
(b) Unless excepted elsewhere in the contract, the Contractor shall (i) provide and maintain sanitation facilities for the work force at the site and (ii) dispose of solid waste in accordance with applicable
Federal, State and local regulations.
(End of Clause)
H.3 AGAR 452.237-74 Key Personnel (FEB 1988)
(a) The Contractor shall assign to this contract the following key personnel:
Overall Project Manager
Logging Supervisor
Fuels Treatment Supervisor
Road Construction Supervisor(s) – supervising work in the timber removal specifications as well as other road work, maintenance and obliteration.
Individual Sub-Managers – Individuals supervising individual sub-contracts for work items not covered by personnel noted previously herein.
Information on key personnel qualifications are found in Section C.
(b) During the first ninety (90) days of performance, the Contractor shall make no substitutions of key personnel unless the substitution is necessitated by illness, death, or termination of employment. The
Contractor shall notify the Contracting Officer within 15 calendar days after the occurrence of any of these events and provide the information required by paragraph (c) below. After the initial 90-day period, the
Contractor shall submit the information required by paragraph (c) to the Contracting Officer at least 15 days prior to making any permanent substitutions.
(c) The Contractor shall provide a detailed explanation of the circumstances necessitating the proposed substitutions, complete resumes for the proposed substitutes, and any additional information requested by

Page 26 of 94 the Contracting Officer. Proposed substitutes should have comparable qualifications to those of the persons being replaced. The Contracting Officer will notify the Contractor within 15 calendar days after receipt of all required information of the decision on substitutions. The contract will be modified to reflect any approved changes of key personnel.
(End of Clause)
H. 4 Employment of Eligible Workers a) Labor standards for contracts involving H-2B workers or migrant and seasonal agricultural workers
1.
General
This contract is subject to the Migrant and Seasonal Agricultural Worker Protection Act ( MSPA), 29
United States Code (U.S.C) 1801-1872, and to the U.S. Department of Labor (DOL) regulations implementing MSPA 29 Code of Federal Regulations (CFR) Part 500. MSPA eliminates activities detrimental to migrant and seasonal agricultural workers, requires registration of Farm Labor
Contractors, and ensures necessary protection for the workers.
Information regarding MSPA can be found at http://www.dol.gov/whd/mspa/index.htm
.
This contract is also subject to the H-2B program under 8 CFR Section 274A provisions of the
Immigration and Nationality Act (INA) for the admission of nonimmigrants to the U.S. to perform temporary labor or services.
A Temporary Employment Certification with the Office of Foreign Labor
Certification (OFLC) in the Department of Labor Employment and Training Administration is required if hiring H-2B workers. For further information on the requirements of the H-2B program, visit OFLC’s website at http://www.foreignlaborcert.doleta.gov/ or Wage and Hour’s website at http://www.dol.gov/whd/immigration/H2BFinalRule/index.htm
.
Compliance with MSPA and the INA is a material condition of this contract. If the contractor employs any unauthorized worker(s) during the performance of this contract that violates section 274A of the
INA, the Government may terminate the contract, in addition to other remedies or penalties prescribed by law.
2.
Definitions a) H-2B worker: as used in this part means a nonimmigrant holding a visa authorizing the individual to legally work in the US to perform temporary labor or services. A worker with an
H-2B visa (“H-2B worker”) may also be considered a migrant agricultural worker under MSPA depending on the type and nature of work performed. b) Migrant Agricultural Worker and Seasonal Agricultural Worker : as used in this part means individuals employed for agricultural (including forestry) work on a seasonal or temporary basis. i.
A worker, moving from one seasonal activity to another, is employed on a seasonal basis even though the worker may continue to be employed during a major portion of the year. ii.
iii.
An overnight absence from the migrant workers permanent place of residence is required.
Members of the contractor's immediate family are not considered migrant or seasonal workers. Immediate family includes:

Page 27 of 94
•
Spouse
•
Children, stepchildren, or foster children
•
Parents, stepparents, or foster parents, or
•
Brothers and sisters c) Farm Labor Contractor (FLC).
As used in this part means a person including an individual, partnership, association, joint stock company or a corporation, who, for any money or other valuable consideration, paid or promised to be paid, performs any recruiting, soliciting, hiring, employing, furnishing, or transporting of any migrant or seasonal agricultural worker.
3. Registration Requirements a) Any contractor providing or hiring H-2B nonimmigrants for work under this contract shall provide a copy of their Temporary Employment Certificate. General information about the H-2B program can be found on Fact Sheet # 78 at http://www.dol.gov/whd/regs/compliance/whdfs78.htm
. Contractors can apply for the certificate through the US DOL Employment & Training Administration‘s on line iCERT Visa Portal System at https://icert.doleta.gov/ . b) Any contractor who meets the definition in (2.iii.) above providing or hiring migrant or seasonal workers to perform agricultural or manual forestry work shall first obtain a Federal DOL Farm
Labor Contractor Certificate of Registration ( http://www.dol.gov/whd/forms/fts_wh530.htm
). The contractor shall carry the certificate at all times while engaged in contract performance and shall display it upon request. Any of the contractor's employees who perform any one or more of the activities defined as an FLC in paragraph (2.iii.) must have their own FLC Employee Certificate.
General information about MSPA can be found on Fact Sheet #49 at DOL Wage and Hour Divisions webpage http://www.dol.gov/whd/regs/compliance/whdfs49.htm
.
4.
Certifications
The Contractor shall provide applicable H-2B Temporary Employment Certificate or Farm Labor
Contractor Certificate as part of their representations, certifications, and acknowledgements.
Subcontractor(s) meeting the definitions above shall follow the same requirements as the Prime
Contractor. It is the Prime Contractor’s responsibility to ensure the Subcontractor’s information is provided to the Contracting Officer.
5.
Worker Protections a) Worker Information Posters i.
A contractor who uses the H-2B program to meet its temporary employment needs must post and maintain the H-2B poster (WH-1505) in a conspicuous location accessible to workers at the job site. ii.
The contractor shall display and maintain the MSPA poster (WH-1376) on the job site in a conspicuous location accessible to workers during the contract performance period. b) Personal protective equipment i.
29 CFR Subpart I, OSHA's personal protective equipment (PPE) standard, which includes 29
CFR 1910.132, contains the general requirements for the provision of personal protective equipment and requires employers to perform a hazard assessment to select appropriate PPE for hazards that are present or likely to be present in the workplace. Specific requirements for
PPE are also presented in many different OSHA standards, published in 29 CFR. ii.
Before a worker begins operating equipment, the contractor shall train the workers on the safe

Page 28 of 94 operation and use of the equipment. iii.
The contractor shall provide the appropriate personal protective equipment for the work required to be performed in the contract, wherever necessary by reason of hazards or processes encountered that may cause injury or impairment in the function of any part of the body. Except for foot protection, all PPE must be provided by the employer at no cost to the employee. Includes:
• Head Protection
•
•
Hearing Protection
•
•
Eye/Face Protection
• Leg Protection
Foot Protection
Hand Protection iv.
PPE must be sanitary and in reliable condition. Do not use defective or damaged PPE. PPE must be inspected prior to use on each work shift to ensure it is in serviceable condition. v.
A checklist of applicable PPE guidelines typical for the work performed under this contract is provided. This does not relieve the contractor of the responsibility of performing a risk assessment or providing the necessary PPE for their operations. Reference https://www.osha.gov/SLTC/personalprotectiveequipment/index.html
or OSHA 3151-12R 2003
Personnel Protective Equipment Booklet.
(Contracting Officer – only include those applicable to your project.)
•
MSPA – Forestry Working Conditions Checklist
•
Manual Logging activities: https://www.osha.gov/SLTC/etools/logging/manual/logger/personal_equip.html
•
General Machine and Vehicles Logging activities: https://www.osha.gov/SLTC/etools/logging/mechanical/machines.html
•
Manual Tree Planting :
•
Spraying:
•
Firefighting: c) Field Sanitation. OSHA established minimum standards for field sanitation in covered agricultural settings.
Refer to FACT Sheet # 51 Field Sanitation Standards under the Occupational Safety and Health Act.
6.
Employment Requirements - Fact Sheets with relevant information may be found at http://www.dol.gov/WHD/fact-sheets-index.htm
. a) Contractors employing workers in forestry related work are required to comply with wage and payroll standards and recordkeeping requirements. Refer to Fact Sheet #63: Application of
Federal Labor Laws to Reforestation found on the DOL Wage and Hour Division webpage. b) Contractor Employee List . Contractors are required to provide/maintain an active list of all employees performing work on the job site under this contract. The Employee List will identify employees by full name (aliases), supervisory duties if applicable, and appropriate labor
Occupation Code for work performed under the Service Contract Act Wage Rates applicable to this contract. If Subcontractors are utilized, all tiers of subcontractor(s) are responsible for providing the same information for their employees to the Prime for submittal to the Contracting
Officer.
7.
Transportation

Page 29 of 94 a) The contractor shall be registered to transport employees, unless employees provide their own transportation or carpool by their own arrangement in one of their own vehicles. Authorization for each vehicle that will be used to transport employees must appear on the contractor's certificate. If the contractor directs or requests employees to carpool, the registration requirement is applicable.
Any driver, who transports workers for a fee or at the direction of the contractor, shall be registered as an FLC or an FLC employee. b) See Fact Sheet #50: Transportation Under MSPA, for more information about the vehicle safety standards, driver’s licensing requirements, and vehicle insurance requirements. Note that separate transportation requirements may apply if there are H-2B workers.
8.
Housing a) The authorization to furnish housing, other than commercial lodging certified by a health authority or other appropriate agency, must appear on the contractor's certificate. Contractors should contact their local Wage and Hour Division of the DOL for further information on the requirements of the Act. b) Camping Requirements.
The Forest Service (FS) has various camping opportunities. Check with local FS unit for camping requirements, camping permits may be required. Verify local fire restriction policies.
If camps will be used to house workers subject to MSPA, they are also subject to the temporary labor camp standards at 29 CFR 1910.142. The Forest Service reserves the right to terminate a camping permit at any time. These requirements are in addition to those contained in or provided for under the clause titled “452.236-72 Use of Premises” in this contract. Any violation of these conditions constitutes a breach of contract and may result in revocation of camping approval. i.
Every structure used as shelter must provide protection from the elements. Where adequate heat is not provided, make other arrangements to protect workers from the cold. Cut firewood only after a District Firewood Permit is obtained. ii.
The campsite must not encroach beyond the boundaries designated by the Forest Service. The campsite location must minimize impacts on streams, lakes, and other bodies of water.
Camping is not permitted within developed recreational sites or along primary recreational roads. iii.
The campsite must have a clean appearance at all times. Upon abandonment of any campsite, or termination, revocation, or cancellation of camping privileges, the contractor shall remove, within 10 calendar days, all structures and improvements except those owned by the United
States, and shall restore the site, unless otherwise agreed upon in writing or in the camping permit. Structures or improvements the contractor fails to remove within the 10 calendar day period becomes the property of the United States, however, the contractor remains liable for the cost of the removal and restoration of the site. iv.
Unless otherwise designated by the CO, the use of the area is not exclusive and may be granted to other permittees, contractors, or recreating public. Disorderly conduct is not permitted. v.
Damaging or removing any natural feature or other property of the Forest Service is prohibited. vi.
Servicing of equipment in the campsite is not permissible unless the campsite is within the project area.

Page 30 of 94 vii.
Provide sanitary facilities for storing food. Provide ice chests or coolers, with ice supply made from potable water, and replenish as necessary. Provide sufficient storage for perishable food items. viii.
Provide an adequate and convenient potable water supply in each camp for drinking and cooking purposes. ix.
Provide adequate toilet facilities and toilet paper for the capacity of the camp. Service a n d maintain facilities in a sanitary condition. x.
Collect, store, and dispose of garbage in a manner to discourage rodent access, minimize attraction of flies, and prevent scattering by wind. xi.
Maintain basic first aid supplies available, which must be under the charge of a person trained to administer first aid.
The basic supplies must include:
•
Gauze pads (at least 4x4 inches)
•
Two large gauze pads (at least 8x10 inches)
•
Box adhesive bandages (band-aids)
•
One package of gauze roller bandage (at least 2-inches in width)
•
Two triangular bandages
•
Scissors
•
At least one blanket
•
Tweezers
•
Adhesive tape
•
Latex gloves, and
•
Resuscitation device such as resuscitation bag, airway, or pocket mask. xii.
Wash laundry in such a way that washing and rinsing will not pollute lakes, streams, or other flowing water. xiii.
Dispose waste water away from living and eating areas and in such a way that minimizes pollution to lakes, streams, and other flowing water. xiv.
The contractor shall take all reasonable precautions to prevent and suppress forest fires. Do not dispose of material by burning in open fires during the closed season established by law or regulation without the written permission from the Forest Service. xv.
If authorized to have an open fire, the Contractor shall comply with the following fire regulations:
•
A shovel, axe or Pulaski, a 10-quart pail, which is full of water for immediate use, and a fire extinguisher with an Underwriters Laboratory (UL) rating of at least 1:A 10:BC is required.
•
All fire rings or outside fireplaces must be approved by the Forest Service representative.
The area must be cleared down to mineral soil for a distance of one foot outside of the ring or fireplace, and it must not have any overhanging material. Fire rings must be dismantled and material disposed prior to leaving the site.
•
All generators and other internal combustion engines must be equipped with Forest
Service approved spark arrestors and/or factory designed muffler and exhaust system in good working order. They will be located in a cleared area with the same requirements as

H.5
Safety
Page 31 of 94 in described in the previous paragraph.
•
All fuel must be stored in UL approved flammable storage containers and be located at least 50 feet from any open flame or other source of ignition.
Contractor’s Operations shall facilitate Forest Service’s safe and practical inspection of Contractor’s Operations and conduct of other official duties on Contract Area. Contractor has all responsibility for compliance with safety requirements for Contractor's employees. In the event that a conflict develops between the requirements of this contract or agreed upon methods of proceeding hereunder and State or Federal safety requirements, the contract shall be modified and Contractor may request an equitable adjustment.
H.6 Requirements of Rights-of-Way
Contractor’s use on rights-of-way shall be confined to said rights-of-way and limited by the related easements and stipulations, if any, unless Contractor makes other arrangements that will not infringe upon or adversely affect the grantee’s rights. Said easements or right-of-way documents are available in the offices of the Forest Supervisor and District Ranger.
The rights-of-way listed below indicate where Contractor is authorized to construct roads in accordance with this contract and/or use roads pursuant to H.7 Use of Roads by Contractor. All construction and/or use shall be subject to the terms of said documents (copies of which are available at the Forest Supervisor's office) unless certain requirements are superseded or added to as set forth below for each right-of-way.
Map Road
No.
777
777.3A
777.3A
Grantor
Rights-of-Way List
Grantee
USDA Forest Service
USDA Forest Service
USDA Forest Service
Date County
Recording Data
Volume
Meade Book
Pennington Book
Pennington Book
Page
USE AGREEMENT BETWEEN FOREST SERVICE AND OWNER
Contractor is authorized to subject to the terms and conditions of a between Forest Service and .
H.7 Use of Roads by Contractor
Contractor is authorized to maintain roads, bridges, and other transportation facilities, as needed for harvesting
Included Timber or other products on National Forest and other lands where Forest Service has such authority.
The location and clearing widths of all Temporary Roads or facilities shall be agreed to before construction is started. Contractor is authorized to cut and use for construction without charge construction timber or other products designated by agreement.
Except as provided herein, Contractor is authorized to use existing National Forest roads and Specified Roads, when such use will not cause damage to the roads or National Forest resources and when hauling can be done safely. If Contractor’s use of an existing temporary or National Forest system road cannot be satisfactorily accommodated without reconstruction, Contractor shall be authorized to use such road upon agreement as to the minimum reconstruction work that Contractor shall perform before hauling.
The Contract Area Map shows existing temporary or permanent roads that for such reasons as limitations in structural capacity, safety, and protection of soil, water, and roads:
(a) Cannot be used for log hauling or

Page 32 of 94
(b) May be used only under the restrictive limitations stated therein.
Contractor's use of existing roads identified on Contract Area Map by the following codes is prohibited or subject to restrictive limitations, unless agreed otherwise:
X
Code Use Limitations
Hauling prohibited
R Hauling restricted
U
P
A
W
Unsuitable for hauling prior to completion of agreed reconstruction
Use prohibited
Public use restriction
Regulation waiver
Roads coded A will be signed by the Forest Service to inform the public of use restrictions. Contractor's use of roads coded R, A, or W shall be in accordance with the following restrictions:
Restricted Road List
Road
Number
126
126.1B
Road Name
Brownie
Brownie Br.
1B
EOR – End of Road
FS/PVT – Forest Service/Private
Termini
From To
NFSR
148
NFSR
126
NFSR
126.1B
Map
NE Unit
34
Description of Restrictions
Legend
R
R
Hauling restricted to protect nesting raptors from April 1 through August
15
Hauling restricted to protect nesting raptors from April 1 through August
15
H.8 Road Maintenance
Contractor shall maintain roads, commensurate with Contractor’s use, in accordance with Road Maintenance
Requirements and the Road Maintenance Specifications (see Appendix C). Performance of road maintenance work by Contractor may be required prior to, during, or after each period of use. The timing of work accomplishment shall be based on Contractor’s Progress Schedule.
H.9 Traffic Control Plan

Page 33 of 94
Unless otherwise agreed in writing, when Contractor’s Operations are in progress adjacent to or on Forest
Service controlled roads and trails open to public travel, Contractor shall furnish, install, and maintain all temporary traffic controls that provide the user with adequate warning of hazardous or potentially hazardous conditions associated with Contractor’s Operations. Contractor and Forest Service shall agree to a specific
Traffic Control plan for each individual project prior to commencing operations. Devices shall be appropriate to current conditions and shall be covered or removed when not needed. Except at otherwise agreed, flagmen and devices shall be as specified in the “Manual on Uniform Traffic Control Devices for Streets and Highways”
(MUCD) and as shown on Plans, Contract Area Map, Traffic Control Plan or in specifications attached hereto.
H.10 Use by Others
Forest Service shall have the right to use any road constructed by Contractor under this contract for any and all purposes in connection with the protection and administration of the National Forest. Other parties, in connection with the logging of tributary National Forest timber, may use roads constructed by Contractor hereunder when such use will not materially interfere with Contractor’s Operations. Such third party use shall be contingent upon the third party paying a fair share of maintenance cost commensurate with such commercial use. Unless otherwise provided, Forest Service shall authorize other uses of roads constructed by Contractor hereunder only if:
(a) Forest Service makes appropriate arrangements to relieve Contractor of related maintenance costs commensurate with such other uses and
(b) Such other uses will not materially interfere with Contractor’s Operations.
Where Contractor reconstructs a road having established use, the use during reconstruction and thereafter by
Contractor shall be such as to reasonably accommodate such established use. Contractor shall have the right to use such reconstructed road without material additional interference from other users.
H.10.1 Closure to Use by Others
A. Closure of Roads During Period of Contract.
Unless otherwise agreed in writing between Contractor and Forest Service, Contractor shall within 15 days of receipt of notice from Forest Service, install gates listed below and close gates on roads designated "To
Be Closed" on Contract Area Map and listed below to effectively block access behind such gates to vehicle traffic except that constituting official use. Installation of gates shall follow closure details attached hereto and made a part hereof.
Official vehicle traffic shall constitute that use by Contractor and his employees when engaged in timber sale activities. It shall also include administrative traffic by Forest Service, and other landowners for the administration of their lands. Contractor will close gates as directed by Forest Service at the completion of daily activities or close gates after passage of each vehicle. Forest Service will monitor and administer closure activities.
Road
Number
777*
Location
MP 0.03
Gate Location(s)
Gate
Furnished By
Gate
Installed By
Forest Service Forest Service
In Place
Y

Page 34 of 94
* Seasonal Closure from December 15 through May 15
B. Closure of Roads at End of Contractor's Use.
Unless otherwise agreed in writing between Contractor and Forest Service, upon completion of use,
Contractor shall effectively close to public use the following roads designated "To Be Closed" on Contract
Area Map and listed below. As an element of final road maintenance and environmental or resource protection, the designated closure shall be accomplished by using the methods required for each road as described below:
Installation of barricades, which may include earth berms, logs, timber, rock, metal railing, etc., in accordance with details attached hereto and made a part hereof, including the proper barricade and closure signing.
Scarify, seed, and fertilize these travel ways full width as described in RO-KT-GT.601# Erosion Control
Seeding (Appendix B).
Recontour or reshape cut or fill slopes in accordance with details attached hereto and made a part hereof; seed, scarify, and fertilize as described under RO-KT-GT.601# Erosion Control Seeding (Appendix B); pull existing drainage structures; haul designated culverts to approved stockpile site, or other work needed to obliterate or put road to bed as described in attached road logs or details.
Construct cross ditches by cutting a dip at least six (6) inches deep in the road surface and mounding the excavated material along the downgrade edge of the dip. Dips shall be cut at a sufficient angle so that they will drain to the outside of the road. They shall cross the entire width of the roadbed and be constructed at the following spacing:
Percent Grade Maximum Spacing
2
5
250’
135’
10
15
20
80’
60’
45’
Road
Number
414.4D
Closure Location(s)
Location Closure Method
MP 0.01 & MP
0.1
Install rock barrier at MP 0.01 and construct earthen berm at MP 0.1
Furnished
By
In
Place
Contractor Y
During the life of this contract, Contractor is authorized to install temporary barricades on the roads designated "To Be Closed." Gates with adequate and protected locks may be considered a temporary

Page 35 of 94 barricade. Temporary barricades shall be installed so that they may be readily opened by Contractor or
Forest Service for access to Contract Area in case of fire or other emergency. Official vehicle traffic shall also include administrative traffic by Forest Service and other landowners for the administration of their lands. Contractor shall provide and post approved signs as authorized by Forest Service.
C. Contractor's Operations in areas otherwise closed to motorized vehicle.
During the period of closure specified in Section A, when Contractor's Operations are in areas otherwise closed to motorized vehicles, Contractor shall not be permitted to hunt, transport hunters, discharge firearms, or transport big game animals with vehicles within the closed areas.
H.11 Protection of Land Survey Monuments
Forest Service shall appropriately designate on the ground all known survey monuments, section corners, and other corner accessories. Forest Service shall post identifying signs on two sides of each known bearing tree.
Forest Service shall arrange protective or perpetuative action that does not cause unnecessary delay to
Contractor in authorized clearings, such as Clearcutting Units and road construction, and in other instances where damage to monuments, section corners, and other corner accessories is unavoidable.
Contractor shall protect all known survey monuments, witness corners, reference monuments, and bearing trees against avoidable destruction, obliteration, or damage during Contractor’s Operations. If any known monuments, corners, or accessories are destroyed, obliterated, or damaged by Contractor’s Operations,
Contractor shall hire the appropriate county surveyor or a registered land surveyor to reestablish or restore at the same location the monuments, corners, or accessories at no additional cost to the Government. Such surveyors shall use procedures in accordance with the Bureau of Land Management “Manual of Instructions for the
Survey of the Public Lands of the United States” for General Land Office surveys and in accordance with State law for others. Contractor shall record such survey in appropriate county records.
H.12 Protection Measures Needed for Plants Animals, Cultural Resources, and Cave Resources
1. Areas, known by Forest Service prior to contract solicitation, needing special measures for the protection of plants, animals, cultural resources, and/or cave resources are shown on Contract Area Map and/or identified on the ground, and shall be treated as follows: a.
Unless agreed otherwise, wheeled or track laying equipment shall not be operated in areas identified as needing special measures except on roads, landings, tractor roads, or skid trails. Contractor may be required to backblade skid trails and other ground disturbed by Contractor’s Operations within such areas in lieu of cross ditching. b.
Unless agreed otherwise, trees will not be felled into areas identified as needing special measures. c.
Contractor shall conduct operations in a manner that does not damage or disturb identified areas. In the event that protective measures identified by the Forest Service are for any reason inadequate,
Contracting Officer may delay or interrupt Contractor’s operations, under this Contract, and/or modify this Contract. d.
Contractor shall immediately notify the Forest Service if its operations disturb or damage any area identified as needing special protection, and shall immediately halt its operations in the vicinity of such area until the Forest Service authorizes continued operations. In the event that Contractor's operations disturb or damage an area identified as needing special protection, then Contractor shall reimburse the Forest Service for the full cost and expense of any evaluative and remedial measures undertaken by the Forest Service in connection with such disturbance or damage. Such payment shall not relieve Contractor from civil or criminal liability under applicable law.

Page 36 of 94
2.
Nothing contained in this clause shall establish, or be deemed to establish any express or implied warranty on the part of the Forest Service that the Forest Service has identified all areas within the Contract Area requiring special protection, or that measures prescribed by the Forest Service for protection of such areas are adequate.
3.
Following contract solicitation, additional areas needing special measures for protection may be discovered or identified; protective measures may be revised or newly prescribed; and, additional species of plants and/or animals may be added to federal lists of protected species. In such event, Contracting
Officer may delay or interrupt Contractor’s operations, under this Contract, and/or modify this Contract.
4.
Discovery, by either the Contractor or the Forest Service, of additional areas, resources, species, or members of species needing special protection shall be promptly reported to the other party.
Label on Contract Area Map
ATP1
ATP2
ATP3
Restrictions
Wheeled or track laying equipment shall not be operated in areas identified. ATP boundaries have been marked with Orange paint and excluded from cutting unit boundaries.
Wheeled or track laying equipment shall not be operated in areas identified, except on existing roads. ATP boundaries are shown on the Contract
Area Map and lie outside of cutting unit boundaries.
Wheeled or track laying equipment shall not be operated in areas identified. NFSR 149.5B terminates prior to entering ATP3. The logging plan calls for a temporary road off of the termini of NFSR 149.5B and shall be located outside of the ATP boundary which will be staked.
ATP4 Wheeled or track laying equipment shall not be operated in areas identified. ATP boundaries are shown on the Contract Area Map and lie outside of cutting unit boundaries.
H.13 Protection of Residual Trees
Contractor's Operations shall not unnecessarily damage young growth or other trees to be reserved.
H.14 Sanitation and Servicing
Contractor shall take all reasonable precautions to prevent pollution of air, soil, and water by Contractor’s
Operations. If facilities for employees are established on Contract Area, they shall be operated in a sanitary manner. In the event that Contractor’s Operations or servicing of equipment result in pollution to soil or water,
Contractor shall conduct cleanup and restoration of the polluted site to the satisfaction of Forest Service.
Contractor shall maintain all equipment operating on Contract Area in good repair and free of abnormal leakage of lubricants, fuel, coolants, and hydraulic fluid. Contractor shall not service tractors, trucks, or other equipment on National Forest lands where servicing is likely to result in pollution to soil or water. Contractor shall furnish oil-absorbing mats for use under all stationary equipment or equipment being serviced to prevent leaking or

Page 37 of 94 spilled petroleum-based products from contaminating soil and water resources. Contractor shall remove from
National Forest lands all contaminated soil, vegetation, debris, vehicle oil filters (drained of free-flowing oil), batteries, oily rags, and waste oil resulting from use, servicing, repair, or abandonment of equipment.
H.15 Prevention of Oil Spills
If Contractor maintains storage facilities for oil or oil products on Contract Area, Contractor shall take appropriate preventive measures to ensure that any spill of such oil or oil products does not enter any stream or other waters of the United States or any of the individual States.
If the total oil or oil products storage exceeds 1,320 gallons in containers of 55 gallons or greater, Contractor shall prepare a Spill Prevention Control and Countermeasures Plan. Such plan shall meet applicable EPA requirements (40 CFR 112), including certification by a registered professional engineer.
Contractor shall notify Contracting Officer and appropriate agencies of all reportable (40 CFR 110) spills of oil or oil products on or in the vicinity of Contract Area that are caused by Contractor’s employees agents, contractors, Subcontractors, or their employees or agents, directly or indirectly, as a result of Contractor’s
Operations. Contractor will take whatever initial action may be safely accomplished to contain all spills.
H.16 Hazardous Substances
Contractor shall notify the National Response Center and Contracting Officer of all releases of reportable quantities of hazardous substances on or in the vicinity of Contract Area that are caused by Contractor’s employees, agents, Subcontractors or their employees or agents, directly or indirectly, as a result of Contractor’s
Operations, in accordance with 40 CFR 302.
H.17 Equipment Cleaning
In order to prevent the spread of noxious weeds into the Contract Area, Contractor shall be required to clean all off-road logging and construction equipment prior to entry on to the Contract Area. This cleaning shall remove all soil, plant parts, seeds, vegetative matter, or other debris that could contain or hold seeds. Only logging and construction equipment so cleaned and inspected by the Forest Service will be allowed to operate within the
Contract Area. All subsequent move-ins of equipment to the Contract Area shall be treated in the same manner as the initial move in. "Off-road equipment" includes all logging and construction machinery, except for log trucks, chip vans, service vehicles, water trucks, pickup trucks, cars, and similar vehicles.
Contractor shall employ whatever cleaning methods are necessary to ensure that off-road equipment is free of noxious weeds. Equipment shall be considered free of soil, seed, and other such debris when a visual inspection does not disclose such material. Disassembly of equipment components or specialized inspection tools is not required.
Unless otherwise agreed, Contractor shall give the Forest Service at least 24 hours’ notice when equipment is ready for inspection. Notification will include an agreed upon location where the equipment will be available for inspection by the forest service.
New infestations of noxious weeds, of concern to Forest Service and identified by either Contractor or Forest
Service, on the Contract Area or on the haul route, shall be promptly reported to the other party. Contractor and
Forest Service shall agree on treatment methods to reduce or stop the spread of noxious weeds when new infestations are found. A current list of noxious weeds of concern to Forest Service is available at each Forest
Service office.
H.18 Erosion Prevention and Control

Page 38 of 94
Contractor’s Operations shall be conducted reasonably to minimize soil erosion. Equipment shall not be operated when ground conditions are such that excessive damage will result. The kinds and intensity of erosion control work done by Contractor shall be adjusted to ground and weather conditions and the need for controlling runoff.
Erosion control work shall be kept current immediately preceding expected seasonal periods of precipitation or runoff.
If Contractor fails to do seasonal erosion control work prior to any seasonal period of precipitation or runoff,
Forest Service may temporarily assume responsibility for the work and any unencumbered deposits hereunder may be used by Forest Service to do the work. If needed for such work, Contractor shall make additional deposits on request by Forest Service. Any money deposited or used for this purpose shall be treated as cooperative deposits.
H.19 Streamcourse Protection
“Streamcourses” that are subject to provisions of this Section are shown on Contract Map. Unless otherwise agreed, the following measures shall be observed to protect Streamcourses:
(a) Contractor’s Operations shall be conducted to prevent debris from entering Streamcourses, except as may be authorized under paragraph (d). In event Contractor causes debris to enter Streamcourses in amounts that may adversely affect the natural flow of the stream, water quality, or fishery resource, Contractor shall remove such debris as soon as practicable, but not to exceed 2 days, and in an agreed manner that will cause the least disturbance to Streamcourses.
(b) Culverts or bridges shall be required on Temporary Roads at all points where it is necessary to cross
Streamcourses. Such facilities shall be of sufficient size and design and installed in a manner to provide unobstructed flow of water and to minimize damage to Streamcourses. Trees or products shall not be otherwise hauled or yarded across Streamcourses unless fully suspended.
(c) Wheeled or track-laying equipment shall not be operated in Streamcourses, except at crossings designated by Forest Service or as essential to construction or removal of culverts and bridges.
(d) Flow in Streamcourses may be temporarily diverted only if such diversion is necessary for Contractor’s planned construction and Forest Service gives written authorization. Such flow shall be restored to the natural course as soon as practicable and, in any event, prior to a major storm runoff period or runoff season.
Label on Contract Area
Map
SMZ
Restrictions
The Streamside Management Zone (SMZ) is shown on the contract area map and designated on the ground with pink “Streamside
Management Zone” flagging (south boundary) and NFSR 777 (north boundary). Equipment operations will be limited to crossings as agreed upon with the Forest Service. No landing piles will be allowed within the SMZ. Logs may be decked within the zone for later loading and hauling, in areas agreed upon with the Forest
Service.
H.20 Meadow Protection
Reasonable care shall be taken to avoid damage to the cover, soil, and water in meadows shown on Contract
Area Map. Vehicular or skidding equipment shall not be used on meadows, except where roads, landings, and

Page 39 of 94 tractor roads are approved. Unless otherwise agreed, trees felled into meadows shall be removed by endlining.
Resulting logging slash shall be removed where necessary to protect cover, soil, and water.
H.21 Wetlands Protection
Wetlands requiring protection under Executive Order 11990 are shown on Contract Area Map. Vehicular or skidding equipment shall not be used in such wetlands, except where roads, landings, and tractor roads are approved by the Contracting Officer. Additional measures needed to protect such areas are provided elsewhere herein .
H.22 Contractor Performance Assessment Reporting System (FEB 2011) *(Reference FAR 42.15; AGAR
442.15; FSAR 4G42.1503 & AGAR Advisory 96 – Applicable for the following Contracts/Orders: Service and Supply Contract/Delivery Order >$150,000
(a) General. This contract is subject to Federal Acquisition Regulations (FAR), Agriculture Acquisition
Regulations (AGAR), and Forest Service Acquisition Reference (FSAR) that require past performance evaluations to be completed and entered into the Contractor Performance Assessment Reporting System
(CPARS).
(b) Contact Information. At the Prework Meeting, the name and email address of the Contractor
Representative will be required.
(c) Assessment. Upon completion of the work associated with the contract/delivery orders (final), or at the end of the year mark(s) if the contract exceeds one year (interim), an evaluation will be initiated by the
Contracting Officer in the CPARS system and the Contractor Representative will receive an auto-email from
CPARS with instructions for completion of the evaluation.
Contractors are encouraged to take training and register in this program. Information can be found at:
•
Contractor Overview (1.5 hours) . View Schedule - This training will give the student an understanding of the Contractor Representative and Contractor Corporate Senior Management levels of access, the policies and regulations governing ACASS/CCASS and CPARS, and the electronic workflow with particular attention to the Contractor comment function.
•
Target Audience: This session is specifically targeted to Contractor users who provide Past
Performance Evaluation comments or who manage the ACASS/CCASS and CPARS process for their company.
Online course: Contractor Performance Assessment Reporting System
H.23 AGAR 452.236-78 Fire Suppression and Liability (MARCH 2016)
(a) Contractor's Responsibility for Fire Fighting . The Contractor, under the provisions of FAR clause
52.236-9, Protection of Existing Vegetation, Structures, Equipment, Utilities, and Improvements, shall immediately extinguish all fires on the work site other than those fires in use as a part of the work. The
Contractor may be held liable for all damages and for all costs incurred by the Government for labor, subsistence, equipment, supplies, and transportation deemed necessary to control or suppress a fire set or caused by the Contractor or the Contractor's agents or employees subject to the following fire classifications:
(b) Fire Suppression Costs.
The Contractor's obligations for cost of fire suppression vary according to three classifications of fires as follows:

Page 40 of 94
(1) Operations Fire . An ``operations fire'' is a fire caused by the Contractor's operations other than a negligent Fire. The Contractor agrees to reimburse Forest Service for such cost for each operations fire, subject to a maximum of the dollar amount of $ .
The cost of the Contractor's actions, supplies, and equipment on any such fire, or otherwise provided at the request of Forest Service, shall be credited toward such maximum. If the Contractor's actual cost exceeds contractor's obligation stated above,
Forest Service shall reimburse the contractor for the excess.
(2) Negligent Fire . A ``negligent fire'' is a fire caused by the negligence or fault of the Contractor's operations including, but not limited to, one caused by smoking by persons engaged in the Contractor's operations during the course of their employment, or during rest or lunch periods; or if the Contractor's failure to comply with requirements under this contract results in a fire starting, or permits a fire to spread. Damages and the cost of suppressing negligent fires shall be borne by the Contractor.
(3) Other Fires on Contract Area . Forest Service shall pay the Contractor, at firefighting rates common in the area or at prior agreed rates, for equipment or personnel furnished by the Contractor at the request of
Forest Service, on any fire on contract area other than an operations fire or a negligent fire.
(c) Contractor's Responsibility for Notification in Case of Fire . The Contractor shall immediately notify the Government of any fires sighted on or in the vicinity of the work site.
(d) Contractor's Responsibility for Responding to Emergencies.
When directed by the Contracting
Officer, the Contractor shall temporarily redirect employees and equipment from the work site for emergency work (anticipated to be restricted to firefighting). This is considered to be within the general scope of the contract. An equitable adjustment for any such redirection of employees and equipment will be made under the
CHANGES clause, FAR 52.243-4.
(e) Performance by the Contractor.
Where the Contractor's employees, agents, contractors, subcontractors, or their employees or agents perform the Contractor's operations in connection with fire responsibilities, the Contractor's obligations shall be the same as if performance was by Contractor.
(f) St ate Law . The Contractor shall not be relieved by the terms of this contact of any liability to the United
States for fire suppression costs recovered in an action based on State law, except for such costs resulting from operations fires. Amounts due to the Contractor for firefighting expenditures on operations fires shall not be withheld pending settlement of any such claim or action based on State law.
(End of Clause)
H.24 Urgent Removal Extensions
Requests for urgent removal contract extensions under 36 CFR 223.53 should be submitted to the
Contracting Officer. The Contracting Officer may , in accordance with 36 CFR 223.53, grant a contract extension via bilateral modification to the contract. The terms of the extension will be determined on a case by case basis in accordance with 36 CFR 223.53 and other Forest Service guidance.

Page 41 of 94
PART II - CONTRACT CLAUSES
SECTION I - CONTRACT CLAUSES
52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1988)
This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this address:
FAR Clauses
AGAR Clauses
FEDERAL ACQUISITION REGULATION (48 CFR CHAPTER 1) CLAUSES
CONTRACT CLAUSES
52.204-18
52.232-40
Commercial and Government Entity Code Maintenance
Providing Accelerated Payments to Small Business Subcontractors
FEDERAL ACQUISITION REGULATION (48 CFR CHAPTER 1) CLAUSES
Clause Number
452.236-73
452.236-74
452.237-70
452.237-75
Title
Archeological or Historic Sites *(If applicable; see AGAR
436.573)
Control of Erosion, Sedimentation and Pollution *(If applicable; see AGAR 436.574)
Loss, Damage, Destruction or Repair
Restrictions Against Disclosure
(JUL 2015)
(DEC 2013)
Date
(FEB 1988)
(NOV 1996)
(FEB 1988)
(FEB 1988)
52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-
Commercial Items.
(Feb 2016)
(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:
(1) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015)
(2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).
(3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77, 108-78
(19 U.S.C. 3805 note)).
(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:
[Contracting Officer check as appropriate.]

Page 42 of 94
___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I
(Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).
___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).
___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of
2009 (Jun 2010) (Section 1553 of Pub L. 111-5) (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009).
___ (4) 52.204-10, Reporting Executive compensation and First-Tier Subcontract Awards (Oct 2015)
(Pub. L. 109-282) (31 U.S.C. 6101 note).
___ (5) [Reserved]
___ (6) 52.204-14, Service Contract Reporting Requirements (Jan 2014) (Pub. L. 111-117, section 743 of Div. C).
___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Jan
2014) (Pub. L. 111-117, section 743 of Div. C).
___ (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors
Debarred, Suspended, or Proposed for Debarment (Oct 2015) (31 U.S.C. 6101 note).
___ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Jul
2013) (41 U.S.C. 2313).
___ (10) [Reserved]
___ (11) (i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011) (15 U.S.C.
657a).
___ (ii) Alternate I (Nov 2011) of 52.219-3.
___ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns
(Oct 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer)(15 U.S.C. 657a).
___ (ii) Alternate I (Jan 2011) of 52.219-4.
___ (13) [Reserved]
___ (14) (i) 52.219-6, Notice of Total Small Business Aside (Nov 2011) (15 U.S.C. 644).
___ (ii) Alternate I (Nov 2011).
___ (iii) Alternate II (Nov 2011).
___ (15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).
___ (ii) Alternate I (Oct 1995) of 52.219-7.

Page 43 of 94
___ (iii) Alternate II (Mar 2004) of 52.219-7.
___ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)).
___ (17) (i) 52.219-9, Small Business Subcontracting Plan (Oct 2015) (15 U.S.C. 637 (d)(4)).
___ (ii) Alternate I (Oct 2001) of 52.219-9.
___ (iii) Alternate II (Oct 2001) of 52.219-9.
___ (iv) Alternate III (Oct 2015) of 52.219-9.
___ (18) 52.219-13, Notice of Set-Aside of Orders (Nov 2011) (15 U.S.C. 644(r)).
___ (19) 52.219-14, Limitations on Subcontracting (Nov 2011) (15 U.S.C. 637(a)(14)).
___ (20) 52.219-16, Liquidated Damages—Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).
___ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Nov 2011)
(15 U.S.C. 657f).
___ (22) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15 U.S.C.
632(a)(2)).
___ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged
Women-Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).
___ (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business
Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)).
___ (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).
___ (26) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Feb 2016) (E.O.
13126).
___ (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).
___ (28) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246).
___ (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).
___ (30) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).
___ (31) 52.222-37, Employment Reports on Veterans (Oct 2015) (38 U.S.C. 4212).
___ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec
2010) (E.O. 13496).
___ (33) (i) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O.
13627).

Page 44 of 94
___ (ii) Alternate I (Mar 2015) of 52.222-50, (22 U.S.C. chapter 78 and E.O. 13627).
___ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)
___ (35) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items
(May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)
___ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)
___ (36) (i) 52.223-13, Acquisition of EPEAT® -Registered Imaging Equipment (Jun 2014) (E.O.s
13423 and 13514
___ (ii) Alternate I (Oct 2015) of 52.223-13.
___ (37) (i) 52.223-14, Acquisition of EPEAT® -Registered Television (Jun 2014) (E.O.s 13423 and
13514).
___ (ii) Alternate I (Jun 2014) of 52.223-14.
___ (38) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).
___ (39) (i) 52.223-16, Acquisition of EPEAT® -Registered Personal Computer Products (Oct 2015)
(E.O.s 13423 and 13514).
___ (ii) Alternate I (Jun 2014) of 52.223-16.
___ (40) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging while Driving (Aug 2011)
(E.O. 13513).
___ (41) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).
___ (42) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub.
L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43).
___ (ii) Alternate I (May 2014) of 52.225-3.
___ (iii) Alternate II (May 2014) of 52.225-3.
___ (iv) Alternate III (May 2014) of 52.225-3.
___ (43) 52.225-5, Trade Agreements (Feb 2016) (19 U.S.C. 2501, et seq.
, 19 U.S.C. 3301 note).
___ (44) 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

Page 45 of 94
___ (45) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul
2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10
U.S.C. 2302 Note).
___ (46) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).
___ (47) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42
U.S.C. 5150).
___ (48) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C.
4505), 10 U.S.C. 2307(f)).
___ (49) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 4505, 10 U.S.C.
2307(f)).
___ (50) 52.232-33, Payment by Electronic Funds Transfer— System for Award Management (Jul
2013) (31 U.S.C. 3332).
___ (51) 52.232-34, Payment by Electronic Funds Transfer—Other Than System for Award
Management (Jul 2013) (31 U.S.C. 3332).
___ (52) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).
___ (53) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).
___ (54) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46
U.S.C. Appx 1241(b) and 10 U.S.C. 2631).
___ (ii) Alternate I (Apr 2003) of 52.247-64.
(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or executive orders applicable to acquisitions of commercial items:
[Contracting Officer check as appropriate.]
___ (1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495)
___ (2) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67 .
).
___ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41
U.S.C. chapter 67).
___ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards -- Price Adjustment
(Multiple Year and Option Contracts) (May 2014) (29 U.S.C.206 and 41 U.S.C. chapter 67).
___ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards -- Price Adjustment
(May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

(d) Comptroller General Examination of Record The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records -- Negotiation.
(1) The Comptroller General of the United States, or an authorized representative of the Comptroller
General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.
(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement.
Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.
(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.
(e)
Page 46 of 94
___ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67).
___ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67).
___ (8) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).
___ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C.
1792).
___ (10) 52.237-11, Accepting and Dispensing of $1 Coin (Sep 2008) (31 U.S.C. 5112(p)(1)).
(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c) and (d) of this clause, the
Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—
(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).
(ii) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

Page 47 of 94
(iii) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). Flow down required in accordance with paragraph (1) of FAR clause 52.222-17.
(iv) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).
(v) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246).
(vi) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).
(vii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).
(viii) 52.222-37, Employment Reports on Veterans (Oct 2015) (38 U.S.C. 4212).
(ix) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec
2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause
52.222-40.
(x) 52.222-41, Service Contract Labor Standards (May 2014), (41 U.S.C. chapter 67).
(xi) ____ (A) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627).
___ (B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 E.O. 13627).
(xii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to
Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May
2014) (41 U.S.C. chapter 67.)
(xiii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to
Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)
(xiv) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989).
(xv) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).
(xvi) 52.225-26, Contractors Performing Private Security Functions Outside the United States
(Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year
2008; 10 U.S.C. 2302 Note).
(xvii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42
U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.
(xviii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46
U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph
(d) of FAR clause 52.247-64.
(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.
(End of Clause)

Page 48 of 94
Alternate I (Feb 2000). As prescribed in 12.301(b)(4)(i), delete paragraph (d) from the basic clause, redesignate paragraph (e) as paragraph (d), and revise the reference to “paragraphs (a), (b), (c), or (d) of this clause” in the redesignated paragraph (d) to read “paragraphs (a), (b), and (c) of this clause.”
Alternate II (Jul 2015). As prescribed in 12.301(b)(4)(ii), substitute the following paragraphs (d)(1) and (e)(1) for paragraphs (d)(1) and (e)(1) of the basic clause as follows:
(d)(1) The Comptroller General of the United States, an appropriate Inspector General appointed under section 3 or 8G of the Inspector General Act of 1978 (5 U.S.C. App.), or an authorized representative of either of the foregoing officials shall have access to and right to-
(i) Examine any of the Contractor’s or any subcontractors’ records that pertain to, and involve transactions relating to, this contract; and
(ii) Interview any officer or employee regarding such transactions.
(e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), and (c), of this clause, the
Contractor is not required to flow down any FAR clause in a subcontract for commercial items, other than-
(i) Paragraph (d) of this clause. This paragraph flows down to all subcontracts, except the authority of the
Inspector General under paragraph (d)(1)(ii) does not flow down; and
(ii) Those clauses listed in this paragraph (e)(1). Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-
(A) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (41 U.S.C. 3509).
(B) 52.203-15, Whistleblower Protections Under the American Recovery and Reinvestment Act of 2009
(Jun 2010) (Section 1553 of Pub. L. 111-5).
(C) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.
(D) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).
(E) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246).
(F) 52.222-35, Equal Opportunity for Veterans (Jul 2014) (38 U.S.C. 4212).
(G) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).
(H) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010)
(E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.
(I) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67).
(J) ___(1) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O
13627).
___(2) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O 13627).
(K) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for
Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter
67).
(L) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for
Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).
(M) 52.222-54, Employment Eligibility Verification (Aug 2013).
(N) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2014) Executive Order 13658).
(O) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C.
1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.
(P) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C.
Appx. 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.
FAR 52.216-18
16.506(a))
Ordering (OCT 1995) *(Use if task orders are required to order services; see FAR

Page 49 of 94
(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the Schedule. Such orders may be issued from __________ through ____________ [insert dates].
(b) All delivery orders or task orders are subject to the terms and conditions of this contract. In the event of conflict between a delivery order or task order and this contract, the contract shall control.
(c) If mailed, a delivery order or task order is considered “issued” when the Government deposits the order in the mail. Orders may be issued orally, by facsimile, or by electronic commerce methods only if authorized in the Schedule.
(End of clause)
FAR 52.216-19 Order Limitations (OCT 1995) *(If applicable; see FAR 16.506(b))
(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than _____________ [insert dollar figure or quantity] , the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.
(b) Maximum order. The Contractor is not obligated to honor-
(1) Any order for a single item in excess of _____________ [insert dollar figure or quantity] ;
(2) Any order for a combination of items in excess of ______________ [insert dollar figure or quantity] ; or
(3) A series of orders from the same ordering office within _____________ days that together call for quantities exceeding the limitation in paragraph (b)(1) or (2) of this section.
(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the
Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph
(b) of this section.
(d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within _____ days after issuance, with written notice stating the Contractor’s intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.
(End of clause)
Definite Quantity (OCT 1995) *(If applicable; see FAR 16.506(c)) FAR 52.216-20
(a) This is a definite-quantity, indefinite-delivery contract for the supplies or services specified, and effective for the period stated, in the Schedule.

Page 50 of 94
(b) The Government shall order the quantity of supplies or services specified in the Schedule, and the
Contractor shall furnish them when ordered. Delivery or performance shall be at locations designated in orders issued in accordance with the Ordering clause and the Schedule.
(c) Except for any limitations on quantities in the Order Limitations clause or in the Schedule, there is no limit on the number of orders that may be issued. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations.
(d) Any order issued during the effective period of this contract and not completed within that time shall be completed by the Contractor within the time specified in the order. The contract shall govern the
Contractor’s and Government’s rights and obligations with respect to that order to the same extent as if the order were completed during the contract’s effective period; provided, that the Contractor shall not be required to make any deliveries under this contract after ________________ [insert date].
(End of clause)
Requirements (OCT 1995) *(If applicable; see FAR 16.506(d)) FAR 52.216-21
(a) This is a requirements contract for the supplies or services specified, and effective for the period stated, in the Schedule. The quantities of supplies or services specified in the Schedule are estimates only and are not purchased by this contract. Except as this contract may otherwise provide, if the Government’s requirements do not result in orders in the quantities described as “estimated” or “maximum” in the
Schedule, that fact shall not constitute the basis for an equitable price adjustment.
(b) Delivery or performance shall be made only as authorized by orders issued in accordance with the
Ordering clause. Subject to any limitations in the Order Limitations clause or elsewhere in this contract, the
Contractor shall furnish to the Government all supplies or services specified in the Schedule and called for by orders issued in accordance with the Ordering clause. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations.
(c) Except as this contract otherwise provides, the Government shall order from the Contractor all the supplies or services specified in the Schedule that are required to be purchased by the Government activity or activities specified in the Schedule.
(d) The Government is not required to purchase from the Contractor requirements in excess of any limit on total orders under this contract.
(e) If the Government urgently requires delivery of any quantity of an item before the earliest date that delivery may be specified under this contract, and if the Contractor will not accept an order providing for the accelerated delivery, the Government may acquire the urgently required goods or services from another source.
(f) Any order issued during the effective period of this contract and not completed within that period shall be completed by the Contractor within the time specified in the order. The contract shall govern the
Contractor’s and Government’s rights and obligations with respect to that order to the same extent as if the

Page 51 of 94 order were completed during the contract’s effective period; provided, that the Contractor shall not be required to make any deliveries under this contract after _________________ [insert date].
(End of clause)
**OR**
FAR 52.216-21 Requirements (OCT 1995) Alternate II (APR 1984) *(If applicable; subsistence/brand name; see FAR 16.506(d)) Add:
(g) The requirements referred to in this contract are for items to be manufactured according to Government specifications. Notwithstanding anything to the contrary stated in the contract, the Government may acquire similar products by brand name from other sources for resale.
(End of clause)
**OR**
FAR 52.216-21 Requirements (OCT 1995) Alternate III (OCT 1995) *(If applicable; partial setaside; see FAR 16.506(d)(4)) Substitute the following:
(c) The Government’s requirements for each item or subitem of supplies or services described in the
Schedule are being purchased through one non-set-aside contract and one set-aside contract. Therefore, the
Government shall order from each Contractor approximately one-half of the total supplies or services specified in the Schedule that are required to be purchased by the specified Government activity or activities. The Government may choose between the set-aside Contractor and the non-set-aside Contractor in placing any particular order. However, the Government shall allocate successive orders, in accordance with its delivery requirements, to maintain as close a ratio as is reasonably practicable between the total quantities ordered from the two Contractors.
(End of clause)
**OR**
FAR 52.216-21 Requirements (OCT 1995) Alternate IV (OCT 1995) *(If applicable; subsistence & set-aside; see FAR 16.505 (d)(5)) Substitue the following paragraphs:
(c) The Government’s requirements for each item or subitem of supplies or services described in the
Schedule are being purchased through one non-set-aside contract and one set-aside contract. Therefore, the
Government shall order from each Contractor approximately one-half of the total supplies or services specified in the Schedule that are required to be purchased by the specified Government activity or activities. The Government may choose between the set-aside Contractor and the non-set-aside Contractor in placing any particular order. However, the Government shall allocate successive orders, in accordance with its delivery requirements, to maintain as close a ratio as is reasonably practicable between the total quantities ordered from the two Contractors.

Page 52 of 94
(g) The requirements referred to in this contract are for items to be manufactured according to the
Government specifications. Notwithstanding anything to the contrary stated in the contract, the Government may acquire similar products by brand name from other sources for resale.
(End of clause)
Indefinite Quantity (OCT 1995) *(If applicable; see FAR 16.506(e)) FAR 52.216-22
(a) This is an indefinite-quantity contract for the supplies or services specified, and effective for the period stated, in the Schedule. The quantities of supplies and services specified in the Schedule are estimates only and are not purchased by this contract.
(b) Delivery or performance shall be made only as authorized by orders issued in accordance with the
Ordering clause. The Contractor shall furnish to the Government, when and if ordered, the supplies or services specified in the Schedule up to and including the quantity designated in the Schedule as the
"maximum." The Government shall order at least the quantity of supplies or services designated in the
Schedule as the "minimum."
(c) Except for any limitations on quantities in the Order Limitations clause or in the Schedule, there is no limit on the number of orders that may be issued. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations.
(d) Any order issued during the effective period of this contract and not completed within that period shall be completed by the Contractor within the time specified in the order. The contract shall govern the
Contractor's and Government's rights and obligations with respect to that order to the same extent as if the order were completed during the contract's effective period; provided, that the Contractor shall not be required to make any deliveries under this contract after *_________________ .
(End of clause)
FAR 52.217-7 Option for Increased Quantity - Separately Priced Line Item (MAR 1989) *(If applicable; see FAR 17.208(e))
The Government may require the delivery of the numbered line item, identified in the Schedule as an option item, in the quantity and at the price stated in the Schedule. The Contracting Officer may exercise the option by written notice to the Contractor within *___________________________________. Delivery of added items shall continue at the same rate that like items are called for under the contract, unless the parties otherwise agree.
(End of clause)
Option to Extend Services (Nov 1999). If applicable, see 17.208(f), 52.217-8
The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total

Page 53 of 94 extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within _____ [insert the period of time within which the
Contracting Officer may exercise the option].
(End of clause)
FAR 52.217-9 Option to Extend the Term of the Contract (MAR 2000) *If applicable; see FAR 17.208(g))
(a) The Government may extend the term of this contract by written notice to the Contractor within
*_________________________________; provided, that the Government gives the Contractor a preliminary written notice of its intent to extend at least 60 days before the contract expires. The preliminary notice does not commit the Government to an extension.
(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.
(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed *_________.
52.222-42 Statement of Equivalent Rates for Federal Hires (MAY 2014)
In compliance with the Service Contract Labor Standards statute and the regulations of the Secretary of Labor
(29 CFR part 4), this clause identifies the classes of service employees expected to be employed under the contract and states the wages and fringe benefits payable to each if they were employed by the contracting agency subject to the provisions of 5 U.S.C. 5341 or 5332.
This Statement is for Information Only:
It is not a Wage Determination
Employee Class
Heavy Equipment Operator WG-8
Crew Leader GS-5
Forestry Tech GS-5
Laborer GS-3 or GS-4
Monetary Wage
$21.31/hr
$15.31/hr
$15.31/hr
$12.19 or $13.68/hr
Fringe Benefits
*
*
*
*
*FRINGE BENEFITS: Life, Accident and Health Insurance and Sick Leave Programs - 5.1 percent of basic hourly rate.

Page 54 of 94
*Paid Holidays - 10 per year: New Year's Day, Martin Luther King, Jr's Birthday, Washington's Birthday,
Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans Day, Thanksgiving Day, and
Christmas Day
*Vacation - 13 days paid vacation per year up to 3 years of service, 20 days after 3 years of service, and 26 after 15 years of service. Retirement - 7 percent basic hourly rate.
(End of clause)
FAR 52.222-55 Minimum Wages Under Executive Order 13658 (DEC 2015)
(a) Definitions . As used in this clause--
“United States'' means the 50 states and the District of Columbia.
“Worker''—
(1) Means any person engaged in performing work on, or in connection with, a contract covered by
Executive Order 13658, and—
(i) Whose wages under such contract are governed by the Fair Labor Standards Act (29 U.S.C. chapter 8), the Service Contract Labor Standards statute (41 U.S.C. chapter 67), or the Wage
Rate Requirements (Construction) statute (40 U.S.C. chapter 31, subchapter IV);
(ii) Other than individuals employed in a bona fide executive, administrative, or professional capacity, as those terms are defined in 29 CFR part 541; and
(iii) Regardless of the contractual relationship alleged to exist between the individual and the employer.
(2) Includes workers performing on, or in connection with, the contract whose wages are calculated pursuant to special certificates issued under 29 U.S.C. 214(c).
(3) Also includes any person working on, or in connection with, the contract and individually registered in a bona fide apprenticeship or training program registered with the Department of Labor's
Employment and Training Administration, Office of Apprenticeship, or with a State Apprenticeship
Agency recognized by the Office of Apprenticeship.
(b) Executive Order Minimum Wage rate.
(1) The Contractor shall pay to workers, while performing in the United States, and performing on, or in connection with, this contract, a minimum hourly wage rate of $10.10 per hour beginning January 1,
2015.
(2) The Contractor shall adjust the minimum wage paid, if necessary, beginning January 1, 2016, and annually thereafter, to meet the applicable annual E.O. minimum wage. The Administrator of the
Department of Labor's Wage and Hour Division (the Administrator) will publish annual determinations

Page 55 of 94 in the Federal Register no later than 90 days before the effective date of the new E.O. minimum wage rate. The Administrator will also publish the applicable E.O. minimum wage on www.wdol.gov
(or any successor Web site) and a general notice on all wage determinations issued under the Service Contract
Labor Standards statute or the Wage Rate Requirements (Construction) statute, that will provide information on the E.O. minimum wage and how to obtain annual updates. The applicable published
E.O. minimum wage is incorporated by reference into this contract.
(3)
(i) The Contractor may request a price adjustment only after the effective date of the new annual
E.O. minimum wage determination. Prices will be adjusted only for increased labor costs
(including subcontractor labor costs) as a result of an increase in the annual E.O. minimum wage, and for associated labor costs (including those for subcontractors). Associated labor costs shall include increases or decreases that result from changes in social security and unemployment taxes and workers' compensation insurance, but will not otherwise include any amount for general and administrative costs, overhead, or profit.
(ii) Subcontractors may be entitled to adjustments due to the new minimum wage, pursuant to paragraph (b)(2). Contractors shall consider any subcontractor requests for such price adjustment.
(iii) The Contracting Officer will not adjust the contract price under this clause for any costs other than those identified in paragraph (b)(3)(i) of this clause, and will not provide duplicate price adjustments with any price adjustment under clauses implementing the Service Contract
Labor Standards statute or the Wage Rate Requirements (Construction) statute.
(4) The Contractor warrants that the prices in this contract do not include allowance for any contingency to cover increased costs for which adjustment is provided under this clause.
(5) A pay period under this clause may not be longer than semi-monthly, but may be shorter to comply with any applicable law or other requirement under this contract establishing a shorter pay period.
Workers shall be paid no later than one pay period following the end of the regular pay period in which such wages were earned or accrued.
(6) The Contractor shall pay, unconditionally to each worker, all wages due free and clear without subsequent rebate or kickback. The Contractor may make deductions that reduce a worker's wages below the E.O. minimum wage rate only if done in accordance with 29 CFR 10.23, Deductions.
(7) The Contractor shall not discharge any part of its minimum wage obligation under this clause by furnishing fringe benefits or, with respect to workers whose wages are governed by the Service Contract
Labor Standards statute, the cash equivalent thereof.
(8) Nothing in this clause shall excuse the Contractor from compliance with any applicable Federal or
State prevailing wage law or any applicable law or municipal ordinance establishing a minimum wage higher than the E.O. minimum wage. However, wage increases under such other laws or municipal ordinances are not subject to price adjustment under this subpart.
(9) The Contractor shall pay the E.O. minimum wage rate whenever it is higher than any applicable collective bargaining agreement(s) wage rate.

Page 56 of 94
(10) The Contractor shall follow the policies and procedures in 29 CFR 10.24(b) and 10.28 for treatment of workers engaged in an occupation in which they customarily and regularly receive more than $30 a month in tips.
(c)
(1) This clause applies to workers as defined in paragraph (a). As provided in that definition--
(i) Workers are covered regardless of the contractual relationship alleged to exist between the contractor or subcontractor and the worker;
(ii) Workers with disabilities whose wages are calculated pursuant to special certificates issued under 29 U.S.C. 214(c) are covered; and
(iii) Workers who are registered in a bona fide apprenticeship program or training program registered with the Department of Labor's Employment and Training Administration, Office of
Apprenticeship, or with a State Apprenticeship Agency recognized by the Office of
Apprenticeship, are covered.
(2) This clause does not apply to--
(i) Fair Labor Standards Act (FLSA)-covered individuals performing in connection with contracts covered by the E.O., i.e. those individuals who perform duties necessary to the performance of the contract, but who are not directly engaged in performing the specific work called for by the contract, and who spend less than 20 percent of their hours worked in a particular workweek performing in connection with such contracts;
(ii) Individuals exempted from the minimum wage requirements of the FLSA under 29 U.S.C.
213(a) and 214(a) and (b), unless otherwise covered by the Service Contract Labor Standards statute, or the Wage Rate Requirements (Construction) statute. These individuals include but are not limited to--
(A) Learners, apprentices, or messengers whose wages are calculated pursuant to special certificates issued under 29 U.S.C. 214(a).
(B) Students whose wages are calculated pursuant to special certificates issued under 29
U.S.C. 214(b).
(C) Those employed in a bona fide executive, administrative, or professional capacity (29
U.S.C. 213(a)(1) and 29 CFR part 541).
(d) Notice . The Contractor shall notify all workers performing work on, or in connection with, this contract of the applicable E.O. minimum wage rate under this clause. With respect to workers covered by the Service
Contract Labor Standards statute or the Wage Rate Requirements (Construction) statute, the Contractor may meet this requirement by posting, in a prominent and accessible place at the worksite, the applicable wage determination under those statutes. With respect to workers whose wages are governed by the FLSA, the
Contractor shall post notice, utilizing the poster provided by the Administrator, which can be obtained at www.dol.gov/whd/govcontracts , in a prominent and accessible place at the worksite. Contractors that customarily post notices to workers electronically may post the notice electronically provided the electronic posting is displayed prominently on any Web site that is maintained by the contractor, whether external or internal, and customarily used for notices to workers about terms and conditions of employment.

Page 57 of 94
(e) Payroll Records.
(1) The Contractor shall make and maintain records, for three years after completion of the work, containing the following information for each worker:
(i) Name, address, and social security number;
(ii) The worker's occupation(s) or classification(s);
(iii) The rate or rates of wages paid;
(iv) The number of daily and weekly hours worked by each worker;
(v) Any deductions made; and
(vi) Total wages paid.
(2) The Contractor shall make records pursuant to paragraph (e)(1) of this clause available for inspection and transcription by authorized representatives of the Administrator. The Contractor shall also make such records available upon request of the Contracting Officer.
(3) The Contractor shall make a copy of the contract available, as applicable, for inspection or transcription by authorized representatives of the Administrator.
(4) Failure to comply with this paragraph (e) shall be a violation of 29 CFR 10.26 and this contract.
Upon direction of the Administrator or upon the Contracting Officer's own action, payment shall be withheld until such time as the noncompliance is corrected.
(5) Nothing in this clause limits or otherwise modifies the Contractor's payroll and recordkeeping obligations, if any, under the Service Contract Labor Standards statute, the Wage Rate Requirements
(Construction) statute, the Fair Labor Standards Act, or any other applicable law.
(f) Access . The Contractor shall permit authorized representatives of the Administrator to conduct investigations, including interviewing workers at the worksite during normal working hours.
(g) Withholding . The Contracting Officer, upon his or her own action or upon written request of the
Administrator, will withhold funds or cause funds to be withheld, from the Contractor under this or any other
Federal contract with the same Contractor, sufficient to pay workers the full amount of wages required by this clause.
(h) Disputes . Department of Labor has set forth in 29 CFR 10.51,Disputes concerning contractor compliance, the procedures for resolving disputes concerning a contractor's compliance with Department of Labor regulations at 29 CFR part 10. Such disputes shall be resolved in accordance with those procedures and not the
Disputes clause of this contract. These disputes include disputes between the Contractor (or any of its subcontractors) and the contracting agency, the Department of Labor, or the workers or their representatives.
(i) Antiretaliation . The Contractor shall not discharge or in any other manner discriminate against any worker because such worker has filed any complaint or instituted or caused to be instituted any proceeding under or related to compliance with the E.O. or this clause, or has testified or is about to testify in any such proceeding.

(j) Subcontractor compliance . The Contractor is responsible for subcontractor compliance with the requirements of this clause and may be held liable for unpaid wages due subcontractor workers.
Page 58 of 94
(k) Subcontracts.
The Contractor shall include the substance of this clause, including this paragraph (k) in all subcontracts, regardless of dollar value, that are subject to the Service Contract Labor Standards statute or the
Wage Rate Requirements (Construction) statute, and are to be performed in whole or in part in the United
States.
(End of clause)
52.223-1 Biobased Product Certification (M AY 2012)
As required by the Farm Security and Rural Investment Act of 2002 and the Energy Policy Act of 2005 (7
U.S.C. 8102(c)(3)), the offeror certifies, by signing this offer, that biobased products (within categories of products listed by the United States Department of Agriculture in 7 CFR part 3201, subpart B) to be used or delivered in the performance of the contract, other than biobased products that are not purchased by the offeror as a direct result of this contract, will comply with the applicable specifications or other contractual requirements.
FAR 52.223-2 Affirmative Procurement of Biobased Products Under Service and Construction Contracts
(SEPT 2013) *(See FAR 23.406(b))
(a) In the performance of this contract, the contractor shall make maximum use of biobased products that are United States Department of Agriculture (USDA)-designated items unless—
(1) The product cannot be acquired—
(i) Competitively within a time frame providing for compliance with the contract performance schedule;
(ii) Meeting contract performance requirements; or
(iii)At a reasonable price.
(2) The product is to be used in an application covered by a USDA categorical exemption (see 7
CFR 3201.3(e)). For example, all USDA-designated items are exempt from the preferred procurement requirement for the following:
(i) Spacecraft system and launch support equipment.
(ii) Military equipment, i.e., a product or system designed or procured for combat or combat-related missions.

(b) Information about this requirement and these products is available at BioPreferred Site.
Page 59 of 94
(c) In the performance of this contract, the Contractor shall—
(1) Report to System for Award Management, with a copy to the Contracting Officer, on the product types and dollar value of any USDA-designated biobased products purchased by the Contractor during the previous Government fiscal year, between October 1 and September 30; and
(2) Submit this report no later than—
(i) October 31 of each year during contract performance; and
(ii) At the end of contract performance.
(End of clause)
FAR 52.223-17 Affirmative Procurement of EPA-designated items in Service and Construction
Contracts (May 2008)
(a) In the performance of this contract, the Contractor shall make maximum use of products containing recovered materials that are EPA-designated items unless the product cannot be acquired—
(1) Competitively within a timeframe providing for compliance with the contract performance schedule;
(2) Meeting contract performance requirements; or
(3) At a reasonable price.
(b) Information about this requirement is available at EPA’s Comprehensive Procurement Guidelines web site, http://www.epa.gov/cpg/ . The list of EPA-designated items is available at http://www.epa.gov/cpg/products.htm
.
(End of clause)
Availability of Funds for the Next Fiscal Year (APR 1984) *(If applicable; see FAR FAR 52.232-19
32.706-1(b))
Funds are not presently available for performance under this contract beyond *_________. The
Government's obligation for performance of this contract beyond that date is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise for performance under this contract beyond
*_________, until funds are made available to the Contracting Officer for performance and until the
Contractor receives notice of availability, to be confirmed in writing by the Contracting Officer.
(End of clause)

Page 60 of 94
AGRICULTURE ACQUISITION REGULATION (48 CFR CHAPTER 4) CLAUSES
AGAR 452.209-71 Assurance Regarding Felony Conviction or Tax Delinquent Status for Corporate
Applicants (FEB 2012) Alternate I (FEB 2012)
(a) This award is subject to the provisions contained in sections 433 and 434 of the Consolidated
Appropriations Act, 2012 (P.L. No. 112-74), Division E, as amended and/or subsequently enacted, regarding corporate felony convictions and corporate federal tax delinquencies. Accordingly, by accepting this award the contractor acknowledges that it –
(1) does not have a tax delinquency, meaning that it is not subject to any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, and
(2) has not been convicted (or had an officer or agent acting on its behalf convicted) of a felony criminal violation under any Federal law within 24 months preceding the award, unless a suspending and debarring official of the United States Department of Agriculture has considered suspension or debarment of the awardee, or such officer or agent, based on these convictions and/or tax delinquencies and determined that suspension or debarment is not necessary to protect the interests of the Government.
(b) If the awardee fails to comply with these provisions, the Forest Service may terminate this contract for default and may recover any funds the awardee has received in violation of sections 433 or 434, amended and/or subsequently enacted.
(End of clause)
452.216-73 Minimum and Maximum Contract Amounts (FEB 1988) *(If applicable; see 416.506(b))
MINIMUM AND MAXIMUM CONTRACT AMOUNTS
During the period specified in FAR clause 52.216-18, ORDERING, the Government shall place orders totaling a minimum of * , but not in excess of * .
(End of Clause)

Page 61 of 94
PART III - LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS
SECTION J - LIST OF ATTACHMENTS
J.1 List of Attachments
The following attachments are made a part of this solicitation and any resultant contract.
1.
Appendices
Appendix A - Work Activity Items, ## pages
Detailed Information Sheet, ## pages
Appendix B - Timber or other products Removal Project Terms and Specifications, ## pages
Appendix C – Road Maintenance
Specification List for Road Maintenance, ## pages
Special Project Specifications (SPS) for Road Maintenance, ## pages
Road Maintenance Requirements Specification Table, # pages
Contract Road Maintenance Requirements Summary Table, ## pages
Drawings for Road Maintenance, #pages
2.
Maps

List if more than one map is included.
3.
Wage Determination No:
Number Revision Date Pages
NOTE: THIS PROJECT IS LOCATED IN ZONE #___, AREA #___
4.
Financial Information Forms: FS-6500-24, Financial Statement – 5 pages
(Include with Business Proposal) FS-6500-25, Request for Verification – 1 page
Page 62 of 94

Page 63 of 94
SECTION K - REPRESENTATIONS, CERTIFICATIONS, AND ACKNOWLEDGEMENTS
K.1 FEDERAL ACQUISITON REGULATION (FAR) PROVISIONS AND CLAUSES
The following is reference in the contract award but does not become part of the contract award.
FEDERAL ACQUISITION REGULATION (48 CFR CHAPTER 1) PROVISIONS
Provision Number
52.204-16
Title
Commercial and Government Entity Code Reporting
Date
(JUL 2015)
FAR 52.209-7 Information Regarding Responsibility Matters (JUL 2013)
*(Applicable when resultant contract is expected to exceed $500,000; See FAR 9.104-7(b))
(a) Definitions . As used in this provision—
“Administrative proceeding” means a non-judicial process that is adjudicatory in nature in order to make a determination of fault or liability ( e.g.
, Securities and Exchange Commission Administrative Proceedings,
Civilian Board of Contract Appeals Proceedings, and Armed Services Board of Contract Appeals Proceedings).
This includes administrative proceedings at the Federal and State level but only in connection with performance of a Federal contract or grant. It does not include agency actions such as contract audits, site visits, corrective plans, or inspection of deliverables.
“Federal contracts and grants with total value greater than $10,000,000” means—
(1) The total value of all current, active contracts and grants, including all priced options; and
(2) The total value of all current, active orders including all priced options under indefinite-delivery, indefinite-quantity, 8(a), or requirements contracts (including task and delivery and multiple-award Schedules).
“Principal” means an officer, director, owner, partner, or a person having primary management or supervisory responsibilities within a business entity ( e.g.
, general manager; plant manager; head of a division or business segment; and similar positions).
(b) The offeror has does not have current active Federal contracts and grants with total value greater than
$10,000,000.
(c) If the offeror checked “has” in paragraph (b) of this provision, the offeror represents, by submission of this offer, that the information it has entered in the Federal Awardee Performance and Integrity Information System
(FAPIIS) is current, accurate, and complete as of the date of submission of this offer with regard to the following information:
(1) Whether the offeror, and/or any of its principals, has or has not, within the last five years, in connection with the award to or performance by the offeror of a Federal contract or grant, been the subject of a proceeding, at the Federal or State level that resulted in any of the following dispositions:
(i) In a criminal proceeding, a conviction.
(ii) In a civil proceeding, a finding of fault and liability that results in the payment of a monetary fine, penalty, reimbursement, restitution, or damages of $5,000 or more.

(iii) In an administrative proceeding, a finding of fault and liability that results in—
Page 64 of 94
(A) The payment of a monetary fine or penalty of $5,000 or more; or
(B) The payment of a reimbursement, restitution, or damages in excess of $100,000.
(iv) In a criminal, civil, or administrative proceeding, a disposition of the matter by consent or compromise with an acknowledgment of fault by the Contractor if the proceeding could have led to any of the outcomes specified in paragraphs (c)(1)(i), (c)(1)(ii), or (c)(1)(iii) of this provision.
(2) If the offeror has been involved in the last five years in any of the occurrences listed in (c)(1) of this provision, whether the offeror has provided the requested information with regard to each occurrence.
(d) The offeror shall post the information in paragraphs (c)(1)(i) through (c)(1)(iv) of this provision in FAPIIS as required through maintaining an active registration in the System for Award Management database via
Federal Acquisition Website (see 52.204-7 ).
(End of provision)
52.212-3 Offeror Representations and Certifications-Commercial Items. (M AR 2016)
The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.acquisition.gov
. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (q) of this provision.
(a) Definitions.
As used in this provision--
“Economically disadvantaged women-owned small business (EDWOSB) concern” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.
“Forced or indentured child labor” means all work or service—
(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or
(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.
“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.
“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management,

Page 65 of 94 identity of interests among family members, shared facilities and equipment, and the common use of employees.
“Inverted domestic corporation,” means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C.
395(c).
“Manufactured end product” means any end product in product and service codes (PSCs) 1000-9999, except—
(1) PSC 5510, Lumber and Related Basic Wood Materials;
(2) Product or Service Group (PSG) 87, Agricultural Supplies;
(3) PSG 88, Live Animals;
(4) PSG 89, Subsistence;
(5) PSC 9410, Crude Grades of Plant Materials;
(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;
(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;
(8) PSC 9610, Ores;
(9) PSC 9620, Minerals, Natural and Synthetic; and
(10) PSC 9630, Additive Metal Materials.
“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.
“Restricted business operations” means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan
Accountability and Divestment Act of 2007) conducting the business can demonstrate—
(1) Are conducted under contract directly and exclusively with the regional government of southern
Sudan;
(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the
Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;
(3) Consist of providing goods or services to marginalized populations of Sudan;
(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

Page 66 of 94
(5) Consist of providing goods or services that are used only to promote health or education; or
(6) Have been voluntarily suspended.
Sensitive technology—
(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—
(i) To restrict the free flow of unbiased information in Iran; or
(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and
(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency
Economic Powers Act (50 U.S.C. 1702(b)(3)).
“Service-disabled veteran-owned small business concern”—
(1) Means a small business concern—
(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and
(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.
(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).
“Small business concern” means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation.
“Small disadvantaged business concern, consistent with 13 CFR 124.1002,” means a small business concern under the size standard applicable to the acquisition, that--
(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--
(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and
(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and
(2) The management and daily business operations of which are controlled (as defined at 13.CFR
124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

Page 67 of 94
“Subsidiary” means an entity in which more than 50 percent of the entity is owned—
(1) Directly by a parent corporation; or
(2) Through another subsidiary of a parent corporation.
“Veteran-owned small business concern” means a small business concern—
(1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and
(2) The management and daily business operations of which are controlled by one or more veterans.
“Women-owned business concern” means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women.
“Women-owned small business concern” means a small business concern --
(1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and
(2) Whose management and daily business operations are controlled by one or more women.
“Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13
CFR part 127),” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.
(b)
(1) Annual Representations and Certifications . Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the
SAMwebsite.
(2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through https://www.acquisition.gov
. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications—Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ____________. [Offeror to identify the applicable paragraphs at (c) through (q) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

Page 68 of 94
(c) Offerors must complete the following representations when the resulting contract is to be performed in the
United States or its outlying areas. Check all that apply.
(1) Small business concern . The offeror represents as part of its offer that it [_] is, [_] is not a small business concern.
(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it
[_] is, [_] is not a veteran-owned small business concern.
(3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a service-disabled veteran-owned small business concern.
(4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002.
(5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not a women-owned small business concern.
Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold.
(6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that—
(i) It [_] is, [_] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and
(ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: _________.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.
(7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that—
(i) It [_] is, [_] is not an EDWOSB concern, has provided all the required documents to the
WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

Page 69 of 94
(ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the
EDWOSB concern and other small businesses that are participating in the joint venture:
_____________.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.
(8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, a women-owned business concern.
(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:
___________________________________________
(10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that--
(i) It [_] is, [_] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the
Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with
13 CFR part 126; and
(ii) It [_] is, [_] is not a HUBZone joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each
HUBZone small business concern participating in the HUBZone joint venture. [ The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture : __________.] Each HUBZone small business concern participating in the
HUBZone joint venture shall submit a separate signed copy of the HUBZone representation.
(d) Representations required to implement provisions of Executive Order 11246 --
(1) Previous contracts and compliance. The offeror represents that --
(i) It [_] has, [_] has not, participated in a previous contract or subcontract subject to the Equal
Opportunity clause of this solicitation; and
(ii) It [_] has, [_] has not, filed all required compliance reports.
(2) Affirmative Action Compliance . The offeror represents that --
(i) It [_] has developed and has on file, [_] has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of
Labor (41 CFR parts 60-1 and 60-2), or

Page 70 of 94
(ii) It [_] has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.
(e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.
(f) Buy American Certificate.
(Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1,
Buy American – Supplies, is included in this solicitation.)
(1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e.
, an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of “domestic end product.” The terms “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “end product,” “foreign end product,” and “United States” are defined in the clause of this solicitation entitled “Buy American—
Supplies.”
(2) Foreign End Products:
LINE ITEM NO. COUNTRY OF ORIGIN
[List as necessary]
(3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25.
(g)
(1) Buy American -- Free Trade Agreements -- Israeli Trade Act Certificate . (Applies only if the clause at FAR 52.225-3, Buy American -- Free Trade Agreements -- Israeli Trade Act, is included in this solicitation.)
(i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or
(g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms “Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product,” “commercially available off-the-shelf (COTS) item,” “component,”

Page 71 of 94
“domestic end product,” “end product,” “foreign end product,” “Free Trade Agreement country,”
“Free Trade Agreement country end product,” “Israeli end product,” and “United States” are defined in the clause of this solicitation entitled “Buy American--Free Trade Agreements--Israeli
Trade Act.”
(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or
Israeli end products as defined in the clause of this solicitation entitled “Buy American—Free
Trade Agreements—Israeli Trade Act”:
Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, Panamanian, or
Peruvian End Products) or Israeli End Products:
LINE ITEM NO. COUNTRY OF ORIGIN
[ List as necessary ]
(iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) or this provision) as defined in the clause of this solicitation entitled “Buy
American—Free Trade Agreements—Israeli Trade Act.” The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e.
, an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of “domestic end product.”
Other Foreign End Products:
LINE ITEM NO. COUNTRY OF ORIGIN
[ List as necessary ]
(iv) The Government will evaluate offers in accordance with the policies and procedures of FAR
Part 25.
(2) Buy American—Free Trade Agreements—Israeli Trade Act Certificate, Alternate I . If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:
(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled “Buy American—Free Trade
Agreements—Israeli Trade Act”:

Page 72 of 94
Canadian End Products:
Line Item No.:
___________________________________________
[List as necessary]
(3) Buy American—Free Trade Agreements—Israeli Trade Act Certificate, Alternate II.
If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:
(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or
Israeli end products as defined in the clause of this solicitation entitled “Buy American--
Free Trade Agreements--Israeli Trade Act'':
Canadian or Israeli End Products:
Line Item No.: Country of Origin:
[ List as necessary ]
(4) Buy American—Free Trade Agreements—Israeli Trade Act Certificate, Alternate III. If Alternate III to the clause at 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:
(g)(1)(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or
Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled “Buy American—Free Trade Agreements—Israeli Trade Act”:
Free Trade Agreement Country End Products (Other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:
Line Item No.: Country of Origin:
[ List as necessary ]
(5) Trade Agreements Certificate . (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.)

Page 73 of 94
(i) The offeror certifies that each end product, except those listed in paragraph (g)(5)(ii) of this provision, is a U.S.-made or designated country end product as defined in the clause of this solicitation entitled “Trade Agreements.”
(ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products.
Other End Products
Line Item No.: Country of Origin:
[ List as necessary ]
(iii) The Government will evaluate offers in accordance with the policies and procedures of FAR
Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.made or designated country end products without regard to the restrictions of the Buy American statute. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation.
(h) Certification Regarding Responsibility Matters (Executive Order 12689) . (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals--
(1) [_] Are, [_] are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency;
(2) [_] Have, [_] have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property; and
(3) [_] Are, [_] are not presently indicted for, or otherwise criminally or civilly charged by a
Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and
(4) [_] Have, [_] have not, within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,500 for which the liability remains unsatisfied.
(i) Taxes are considered delinquent if both of the following criteria apply:
(A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or

Page 74 of 94 judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted.
(B) The taxpayer is delinquent in making payment.
A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded.
(ii) Examples.
(A) The taxpayer has received a statutory notice of deficiency, under I.R.C. §6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appear rights.
(B) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. §6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals Contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights.
(C) The taxpayer has entered into an installment agreement pursuant to I.R.C. §6159. The taxpayer is making timely payments and is in full compliance with the agreement terms.
The taxpayer is not delinquent because the taxpayer is not currently required to make full payment.
(D) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. §362 (the Bankruptcy
Code).
(i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). [The
Contracting Officer must list in paragraph (i)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, unless excluded at 22.1503(b).]
(1) Listed End Product
Listed End Product: Listed Countries of Origin:
(2) Certification. [If the Contracting Officer has identified end products and countries of origin in paragraph (i)(1) of this provision, then the offeror must certify to either (i)(2)(i) or (i)(2)(ii) by checking the appropriate block.]

Page 75 of 94
[_] (i) The offeror will not supply any end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product.
[_] (ii) The offeror may supply an end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that is has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor.
(j) Place of manufacture.
(Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly—
(1) [_] In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or
(2) [_] Outside the United States.
(k) Certificates regarding exemptions from the application of the Service Contract Labor Standards.
(Certification by the offeror as to its compliance with respect to the contract also constitutes its certification as to compliance by its subcontractor if it subcontracts out the exempt services.) [The contracting officer is to check a box to indicate if paragraph (k)(1) or (k)(2) applies.]
(1) [_] Maintenance, calibration, or repair of certain equipment as described in FAR 22.1003-4(c)(1).
The offeror [_] does [_] does not certify that—
(i) The items of equipment to be serviced under this contract are used regularly for other than
Governmental purposes and are sold or traded by the offeror (or subcontractor in the case of an exempt subcontract) in substantial quantities to the general public in the course of normal business operations;
(ii) The services will be furnished at prices which are, or are based on, established catalog or market prices (see FAR 22.1003-4(c)(2)(ii)) for the maintenance, calibration, or repair of such equipment; and
(iii) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract will be the same as that used for these employees and equivalent employees servicing the same equipment of commercial customers.
(2) [_] Certain services as described in FAR 22.1003-4(d)(1). The offeror [_] does [_] does not certify that—
(i) The services under the contract are offered and sold regularly to non-Governmental customers, and are provided by the offeror (or subcontractor in the case of an exempt subcontract) to the general public in substantial quantities in the course of normal business operations;
(ii) The contract services will be furnished at prices that are, or are based on, established catalog or market prices (see FAR 22.1003-4(d)(2)(iii));

Page 76 of 94
(iii) Each service employee who will perform the services under the contract will spend only a small portion of his or her time (a monthly average of less than 20 percent of the available hours on an annualized basis, or less than 20 percent of available hours during the contract period if the contract period is less than a month) servicing the Government contract; and
(iv) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract is the same as that used for these employees and equivalent employees servicing commercial customers.
(3) If paragraph (k)(1) or (k)(2) of this clause applies—
(i) If the offeror does not certify to the conditions in paragraph (k)(1) or (k)(2) and the
Contracting Officer did not attach a Service Contract Labor Standards wage determination to the solicitation, the offeror shall notify the Contracting Officer as soon as possible; and
(ii) The Contracting Officer may not make an award to the offeror if the offeror fails to execute the certification in paragraph (k)(1) or (k)(2) of this clause or to contact the Contracting Officer as required in paragraph (k)(3)(i) of this clause.
(l) Taxpayer identification number (TIN) (26 U.S.C. 6109, 31 U.S.C. 7701) . (Not applicable if the offeror is required to provide this information to the SAM database to be eligible for award.)
(1) All offerors must submit the information required in paragraphs (l)(3) through (l)(5) of this provision to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d), reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M, and implementing regulations issued by the Internal Revenue
Service (IRS).
(2) The TIN may be used by the government to collect and report on any delinquent amounts arising out of the offeror’s relationship with the Government (31 U.S.C. 7701(c)(3)). If the resulting contract is subject to the payment reporting requirements described in FAR 4.904, the TIN provided hereunder may be matched with IRS records to verify the accuracy of the offeror’s TIN.
(3) Taxpayer Identification Number (TIN).
[_] TIN:_____________________.
[_] TIN has been applied for.
[_] TIN is not required because:
[_] Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States;
[_] Offeror is an agency or instrumentality of a foreign government;
[_] Offeror is an agency or instrumentality of the Federal Government;
(4) Type of organization.

Page 77 of 94
[_] Sole proprietorship;
[_] Partnership;
[_] Corporate entity (not tax-exempt);
[_] Corporate entity (tax-exempt);
[_] Government entity (Federal, State, or local);
[_] Foreign government;
[_] International organization per 26 CFR 1.6049-4;
[_] Other ____________________.
(5) Common parent.
[_] Offeror is not owned or controlled by a common parent:
[_] Name and TIN of common parent:
Name ____________________________________
TIN ______________________________________
(m) Restricted business operations in Sudan . By submission of its offer, the offeror certifies that the offeror does not conduct any restricted business operations in Sudan.
(n) Prohibition on Contracting with Inverted Domestic Corporations—
(1) Government agencies are not permitted to use appropriated (or otherwise made available) funds for contracts with either an inverted domestic corporation, or a subsidiary of an inverted domestic corporation, unless the exception at 9.108-2(b) applies or the requirement is waived in accordance with the procedures at 9.108-4.
(2) Representation . The offeror represents that—
(i) It [ ] is, [ ] is not an inverted domestic corporation; and
(ii) It [ ] is, [ ] is not a subsidiary of an inverted domestic corporation.
(o) Prohibition on contracting with entities engaging in certain activities or transactions relating to Iran.
(1) The offeror shall email questions concerning sensitive technology to the Department of State at
CISADA106@state.gov
.
(2) Representation and Certification. Unless a waiver is granted or an exception applies as provided in paragraph (o)(3) of this provision, by submission of its offer, the offeror—

Page 78 of 94
(i) Represents, to the best of its knowledge and belief, that the offeror does not export any sensitive technology to the government of Iran or any entities or individuals owned or controlled by, or acting on behalf or at the direction of, the government of Iran;
(ii) Certifies that the offeror, or any person owned or controlled by the offeror, does not engage in any activities for which sanctions may be imposed under section 5 of the Iran Sanctions Act; and
(iii) Certifies that the offeror, and any person owned or controlled by the offeror, does not knowingly engage in any transaction that exceeds $3,500 with Iran’s Revolutionary Guard Corps or any of its officials, agents, or affiliates, the property and interests in property of which are blocked pursuant to the International Emergency Economic Powers Act (50(U.S.C. 1701 et seq.)
(see OFAC’s Specially Designated Nationals and Blocked Persons List at http://www.treasury.gov/ofac/downloads/t11sdn.pdf
).
(3) The representation and certification requirements of paragraph (o)(2) of this provision do not apply if—
(i) This solicitation includes a trade agreements certification (e.g., 52.212-3(g) or a comparable agency provision); and
(ii) The offeror has certified that all the offered products to be supplied are designated country end products.
(p) Ownership or Control of Offeror . (Applies in all solicitations when there is a requirement to be registered in
SAM or a requirement to have a DUNS Number in the solicitation.
(1) The Offeror represents that it [ ] has or [ ] does not have an immediate owner. If the Offeror has more than one immediate owner (such as a joint venture), then the Offeror shall respond to paragraph (2) and if applicable, paragraph (3) of this provision for each participant in the joint venture.
(2) If the Offeror indicates “has” in paragraph (p)(1) of this provision, enter the following information:
Immediate owner CAGE code:_____________________________________________
Immediate owner legal name:______________________________________________
(Do not use a “doing business as” name)
Is the immediate owner owned or controlled by another entity:
[ ] Yes or [ ] No.
(3) If the Offeror indicates “yes” in paragraph (p)(2) of this provision, indicating that the immediate owner is owned or controlled by another entity, then enter the following information:
Highest level owner CAGE code:_____________________________________________
Highest level owner legal name:______________________________________________

Page 79 of 94
(Do not use a “doing business as” name)
(q) Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any
Federal Law.
(1) As required by section 744 and 745 of Division E of the Consolidated and Further Continuing
Appropriations Act, 2015 (Pub. L. 113-235), and similar provisions, if contained in subsequent appropriations acts, the Government will not enter into a contract with any corporation that—
(i) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless and agency has considered suspension or debarment of the corporation and made a determination that suspension or debarment is not necessary to protect the interests of the Government; or
(ii) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless an agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government.
(2) The Offeror represents that--
(i) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and
(ii) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a
Federal law within the preceding 24 months.
(End of Provision)
Alternate I (Oct 2014). As prescribed in 12.301(b)(2), add the following paragraph (c)(11) to the basic provision:
(11) (Complete if the offeror has represented itself as disadvantaged in paragraph (c)(4) of this provision.)
____ Black American.
____ Hispanic American.
____ Native American (American Indians, Eskimos, Aleuts, or Native Hawaiians).
____ Asian-Pacific American (persons with origins from Burma, Thailand, Malaysia, Indonesia,
Singapore, Brunei, Japan, China, Taiwan, Laos, Cambodia (Kampuchea), Vietnam, Korea, The
Philippines, Republic of Palau, Republic of the Marshall Islands, Federated States of Micronesia, the Commonwealth of the Northern Mariana Islands, Guam, Samoa, Macao, Hong Kong, Fiji,
Tonga, Kiribati, Tuvalu, or Nauru).

Page 80 of 94
____ Subcontinent Asian (Asian-Indian) American (persons with origins from India, Pakistan,
Bangladesh, Sri Lanka, Bhutan, the Maldives Islands, or Nepal).
____ Individual/concern, other than one of the preceding.
(End of Provision)
52.226-3 Disaster or Emergency Area Representation (NOV 2007) (only used When setting aside under the Stafford Act. FAR 26.206)
(a) Set-aside area. The area covered in this contract is:
________________________________________________ [Contracting Officer to fill in with definite geographic boundaries.]
(b) Representations. The offeror represents that it o does o does not reside or primarily do business in the designated set-aside area.
(c) An offeror is considered to be residing or primarily doing business in the set-aside area if, during the last twelve months-
(1) The offeror had its main operating office in the area; and
(2) That office generated at least half of the offeror’s gross revenues and employed at least half of the offeror’s permanent employees.
(d) If the offeror does not meet the criteria in paragraph (c) of this provision, factors to be considered in determining whether an offeror resides or primarily does business in the set-aside area include-
(1) Physical location(s) of the offeror’s permanent office(s) and date any office in the set-aside area(s) was established;
(2) Current state licenses;
(3) Record of past work in the set-aside area(s) (e.g., how much and for how long);
(4) Contractual history the offeror has had with subcontractors and/or suppliers in the set-aside area;
(5) Percentage of the offeror’s gross revenues attributable to work performed in the set-aside area;
(6) Number of permanent employees the offeror employs in the set-aside area;
(7) Membership in local and state organizations in the set-aside area; and
(8) Other evidence that establishes the offeror resides or primarily does business in the set-aside area.
For example, sole proprietorships may submit utility bills and bank statements.
(e) If the offeror represents it resides or primarily does business in the set-aside area, the offeror shall furnish documentation to support its representation if requested by the Contracting Officer. The solicitation may require the offeror to submit with its offer documentation to support the representation.
(End of provision)

Page 81 of 94
AGRICULTURE ACQUISITION REGULATION (48 CFR CHAPTER 4) CLAUSES
K.3 AGAR 452.209-70 Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction (Deviation 2012-01) (FEB 2012) Alternate I (FEB 2012)
(a) Awards made under this solicitation are subject to the provisions contained in sections 433 and 434 in the
Consolidated Appropriations Act, 2012 (P.L. No. 112-74), Division E, as amended and/or subsequently enacted, regarding corporate felony convictions and corporate federal tax delinquencies. To comply with these provisions, all Offerors must complete paragraph (1) of this representation, and all corporate Offerors also must complete paragraphs (2) and (3) of this representation.
(b) The Offeror represents that –
(1) The Offeror is , is not (check one) an entity that has filed articles of incorporation in one of the fifty states, the District of Columbia, or the various territories of the United States including American Samoa,
Federated States of Micronesia, Guam, Midway Islands, Northern Mariana Islands, Puerto Rico, Republic of
Palau, Republic of the Marshall Islands, U.S. Virgin Islands. (Note that this includes both for-profit and nonprofit organizations.)
If the Offeror checked “is” above, the Offeror must complete paragraphs (2) and (3) of the representation. If
Offeror checked “is not” above, Offeror may leave the remainder of the representation blank.
(2) (i) The Offeror has , has not (check one) been convicted of a felony criminal violation under Federal or State law in the 24 months preceding the date of offer.
(ii) Offeror has , has not (check one) had any officer or agent of Offeror convicted of a felony criminal violation for actions taken on behalf of Offeror under Federal law in the 24 months preceding the date of offer.
(3) The Offeror does , does not (check one) have any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability.
(End of provision)
: (Certification to be submitted with response.)
Contractors are required to provide certification under this solicitation in compliance with the Migrant and
Seasonal Agricultural Workers Protection Act (MSPA) and Farm Labor Contractor (FLC) Certificate of
Registration requirements describing the workforce they will utilize to fulfill the contract requirements under this solicitation and any resulting contract. If the Contractor will supply workers under the H-2B Program, the
Contractor is required to provide a copy of the Temporary Employment Certificate issued by DOL.
Subcontractors are bound by the same requirements for licenses and permits under this contract. If a Prime
Contractor identifies a Subcontractor as part of their workforce to accomplish the work under this solicitation, the Prime Contractor shall submit the Subcontractor’s signed certification with their response to the solicitation.
H-2B Workers: ( http://www.foreignlaborcert.doleta.gov/ )
Company certifies it will not be utilizing H2B Workers under any resulting contract of this solicitation.
Company will be utilizing H2B Workers (under any resulting contract of this solicitation. Provide a copy of Temporary Employment Certificate.)

Page 82 of 94
MSPA Workers: ( http://www.dol.gov/whd/mspa/)
Company certifies it will not be utilizing MSPA workers under any resulting contract of this solicitation.
Certifies has valid FLC certificate of registration.
(Attach a copy of current certification.)
Authorization includes:
Transporting workers
Housing workers
Company has applied for certificate of registration on
Contractors not currently having obtained a certificate (for each partner, if partnership) will be requested to furnish proof of having obtained a certificate prior to award of contract. Partnerships must furnish proof of registration of their assumed business name, if any, with the State of registration.
State of No.__ __
Information about licensing requirements and procedures may be obtained from the following:
I, on behalf of said Company, certify to the above responses.
(Signature)
(Printed Name)
(Date)
(Title)
Include if there are specific requirements
**Use in accordance with letter 6300/1580 Consideration for Local Contractors in Evaluating Proposals dated July 7, 2014 and
FSH 2409.19 Chapter 61.13.
(a) The offeror is / is not a local contractor who is from, and who provides employment and training for, dislocated and displaced workers in an economically disadvantaged rural community, including those historically timber-dependent areas that have been affected by reduced timber harvesting on Federal lands and other forest-dependent rural communities isolated from significant alternative employment opportunities, as contemplated by Section 2374 of Public Law 101-624, "The Principal Laws Relating to
USDA Forest Service and Private Forestry Programs." As amended , “The Act”.
(b) The purpose of this acquisition is / is not for forest hazardous fuels reduction, watershed or water quality monitoring or restoration, wildlife or fish population monitoring, or habitat restoration or management.
(c) The offeror does / does not request consideration in the evaluation of bids or proposals for this acquisition pursuant to the Act.
(End of provision)
(Certification to be submitted with quote.)
The offeror/quoter represents and certifies that--
(a) The firm/individual is, is not a current Federal Government employee.

Page 83 of 94
(b) The firm is, is not substantially owned or controlled by a Government employee or retiree. (FAR
Part 3.6)
(c) The firm/individual is, is not a former USDA EMPLOYEE.
(d) The firm/individual is, is not a retired USDA employee.
If retired, give date of retirement _ ________.
(e) The firm/individual is, is not related to a current Forest Service employee on any forest service units within the Rocky Mountain Region.
If so, list employee's name and location. ____________________________.
I, on behalf of said Company, certify the above information is factual.
(Signature)
(Printed Name)
(Date)
(Title)
SECTION L - INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS
L.1 CONSIDERATION FOR LOCAL CONTRACTORS (APR 2010) **Use in accordance with letter
6300/1580 Consideration for Local Contractors in Evaluating Proposals dated July 7, 2014 and FSH
2409.19 Chapter 61.13.
(a) If this solicitation indicates that the selection decision will be made considering only price and pricerelated factors, and if any offeror qualifies for and requests consideration in the evaluation of bids or proposals pursuant to Section 2374 of Public Law 101-624, "The Principal Laws Relating to USDA Forest
Service and Private Forestry Programs." As amended , “The Act”, the contracting officer will evaluate bids or proposals by adding a factor of ___ [contracting officer insert the percentage from 10 to 25] percent to the price of all bids or proposals that do not qualify for and request such consideration.
(b) If this solicitation indicates that the selection decision will be made using a trade-off process of both price and non-price factors, and if any offeror qualifies for and requests consideration in the evaluation of proposals pursuant to Section 2374 of the Act, the contracting officer will evaluate proposals by adding a factor of ___ [contracting officer insert the percentage from 20 to 40] percent to the price of all proposals that do not qualify for and request such consideration.
(End of provision)
FAR 52.215-5 Facsimile Proposals (OCT 1997) *(Use if you will accept facsimile proposals)

Page 84 of 94
(a) Definition . "Facsimile proposal," as used in this provision, means a proposal, revision or modification of a proposal, or withdrawal of a proposal that is transmitted to and received by the Government via facsimile machine.
(b) Offerors may submit facsimile proposals as responses to this solicitation. Facsimile proposals are subject to the same rules as paper proposals.
(c) The telephone number of receiving facsimile equipment is: [* insert telephone number].
(d) If any portion of a facsimile proposal received by the Contracting Officer is unreadable to the degree that conformance to the essential requirements of the solicitation cannot be ascertained from the document-
(1) The Contracting Officer immediately shall notify the offeror and permit the offeror to resubmit the proposal;
(2) The method and time for resubmission shall be prescribed by the Contracting Officer after consultation with the offeror; and
(3) The resubmission shall be considered as if it were received at the date and time of the original unreadable submission for the purpose of determining timeliness, provided the offeror complies with the time and format requirements for resubmission prescribed by the Contracting Officer.
(e) The Government reserves the right to make award solely on the facsimile proposal. However, if requested to do so by the Contracting Officer, the apparently successful offeror promptly shall submit the complete original signed proposal.
AGRICULTURE ACQUISITION REGULATION (48 CFR CHAPTER 4)
AGAR 452.204-70 Inquiries (FEB 1988)
Inquiries and all correspondence concerning this solicitation should be submitted in writing to the Contracting
Officer. Offerors should contact only the Contracting Officer issuing the solicitation about any aspect of this requirement prior to contract award.
L.2.1 – General Instructions
Proposals shall conform to the instructions provided in this section. Proposals shall be neat, clearly and concisely written, indexed and logically assembled. The intent of your proposal is to communicate why you should be selected. Therefore, ensure you address (answer) each instruction element. Failure to properly respond may eliminate you from the competition.
L.2.1.1
Prospective offerors shall concurrently submit two separate documents:
(a) Volume I - Technical Proposal - One original. DO NOT return the entire solicitation with your proposal.
(i) Experience questionnaire should be included with your technical proposal or alternate format that provides all information requested.
(ii) Respond to each evaluation criteria in Section M.3
(b) Volume II - Price Proposal - One original – do not include a copy of your technical proposal with your price proposal. DO NOT return the entire solicitation with your proposal.

Page 85 of 94
Include in your price proposal:
(i) Completed and Signed SF-33.
(ii) Complete Section B, Schedule of Items, for all items listed, both Base and Optional items. The schedule of items with extensions completed
(iii) Complete and return all certifications identified in Section K.
L.2.1.2
All proposals must be complete, self-sufficient, and respond directly to the requirements of this solicitation. Any commitments made in the proposal shall become a part of the resultant contract.
Apparent inconsistencies between promised performance and statement of work shall be fully explained. Any significant inconsistency, if unexplained, raises a fundamental issue of the offeror’s understanding of the statement of work and/or ability to perform the contract. This may be a basis for rejection of the proposal. In no case shall words like “we will comply with the requirements of the contract,” or equivalent statements, be acceptable to meet the requirements of this solicitation.
Failure to comply with these instructions may result in the offeror’s proposal being found nonresponsive.
L.2.1.3
Offeror’s are cautioned that the government intends to award a contract without discussions; thus, initial proposal should represent the best possible effort.
L.2.1.4
Submitted materials should be fully responsive to and consistent with the requirements of the solicitation and the evaluation criteria listed in section M. The format of the proposal shall be: a) Pages shall be 8 ½ x 11.
Typing fonts should be no smaller than 12 pitch in a font that is easily readable such as Times, Times New Roman, or Arial. b) A single staple in the upper left had corner is permissible – do not bind nor place proposal in a folder. Elaborate format color representations, and bindings are not desirable. c) Proposal pages should be numbered and not more than 50 pages in length for each volume .
L.2.1
.
5 Restriction on disclosure and use of data: Offerors that include in their proposals data that they do not want disclosed to the public for any purpose, or used by the Government except for evaluation purposes shall mark the title page with the following legend: “This proposal includes data that shall not be disclosed outside the Government and shall not be duplicated, used, or disclosed, in whole or in part for any purpose other than to include in contract award.” Other pages should reference title page statement. Or any other restriction on release of proposal information..
L.2.1.6 Disposition of Proposals: The original copy of the technical and cost proposal will be retained with the contract file. All copies of technical proposals will be destroyed after completion of technical evaluations.
L.2.2 Proposal Preparation Instructions for Evaluation Factors
NOTE: The following portions of the Offeror’s technical proposal will be incorporated into any resultant contract: [Work Plan and Schedule], [Key Personnel]
FACTOR 1. TECHNICAL APPROACH
1A. Work Plan and Schedule.
Address your proposed work plan as outlined in C.6. Include the sequence and methodology of accomplishing the timber removal, pre-commercial thinning, pre-commercial thinning with decking, and other slash treatments in such manner that your, or your subcontractor’s, approach to, and coordination between, the various operations are clearly described. Address the removal and utilization of non-saw material. Describe your approach for

Page 86 of 94 ensuring resource protection. Address both completion of work within individual units and a general plan for sequence of work across the project, including all work items. What work element(s), if any, will be completed independent of product removal? Address how you will schedule treatments to minimize the impact on local roads and trails.
NOTE: This is NOT a request for a detailed logging plan. After award and prior to beginning work, the
Contractor must, as stated in the timber or other products removal specifications, submit a detailed logging and resource protection plan covering each unit and subject to approval by the Contracting Officer.
1B. Key Personnel. Provide the resumes of the persons to be designated as the Overall Project
Manager, Logging Supervisor, Fuels Treatment Supervisor, and individual sub managers.
Include list of successfully completed projects within the last three years, including reference names and phone numbers for these projects.
1C. Equipment.
Specify the equipment to be used to accomplish work activities involving timber removal, pre-commercial thinning, pre-commercial thinning with decking, and other slash treatments . Include make and model of proposed equipment.
1D. Quality Control Plan.
Address your proposed Quality Control plan as outlined in Section
E.2. a) What supervisory and instruction measures you will employ to ensure that contract specifications will be met prior to requesting a Forest Service inspection? b) What are your self-inspection measures, including how you will inspect work for compliance with specification? c) Fully explain how project management/oversight will be accomplished for this project.
1E. Biopreferred Product Use
Provide requested information below. Refer to C.7 in the specifications.
The Offeror shall identify all recycled-content products, biobased products, environmentally preferable products and services, and non-ozone depleting substances to be acquired, used, and installed in the performance of this contract. For each Biobased product, the Offeror shall specify the percentage of Biobased content, and for the USDA-designated Biobased content products, the offeror shall demonstrate that the products to be used under this contract will contain the percentage specified in the USDA recommendations or the highest level of Biobased material practicable, consistent with USDA's recommended percentages of Biobased content.
If the Contractor proposes utilizing non-designated products, a justification shall be provided for use of those items identified as non-designated products.
The offeror shall identify prior sustainable product management experience in specifying, purchasing, using, and installing Biobased products. Provide a list identifying all relevant contracts performed over the past two years using sustainable products. Include a list of the
Biobased products utilized on the contract.
Provide a breakdown of the cost of items proposed for use and total value of those products to be utilized on this contract.
FACTOR 2. PAST PERFORMANCE.
Furnish a list of three projects of relevant and similar magnitude completed by the firm within the last five years. For each project cited, provide:

Page 87 of 94 a) the name of the project, b) the location of the project, c) the total cost of the project, d) brief narrative of the project (less than ½ page per project) e) name of the Government Agency, Company, or Individual contracting the work, f) the name and phone number of the Contracting Officer, project Engineer (if a nongovernment project), or individual administering the project, and g) any evaluations that you received.
The technical proposal must address past performance for both the Offeror and any proposed major subcontractors. Companies lacking relevant past performance history will be evaluated on past performance information regarding predecessor companies, key personnel who have relevant experience, or subcontractors that will perform major or critical aspects of the requirement when such information is relevant to this acquisition.
FACTOR 3. BENEFITS TO LOCAL COMMUNITY
The offeror shall describe how its planned activities in performance of the project will provide a direct economic benefit to the local and rural community, the potential magnitude of benefit, and how this benefit will be quantified.
If proposing to use local work force, explain how you will recruit and utilize labor, subcontractors, and other workforce, as skills allow, from:
•
Milling facilities *east, west, south, north of*_____in the state of______.
Also provide an estimate on the number of woods workers to be employed who reside in the county and adjacent counties where the project is located, and sub-contractors to be employed from the city/area where the project will occur.
FACTOR 4. PRICE.
Refer to section L.2 for proposal preparation instructions. Provide your most competitive price on the
Schedule of items in Section B. Note: unit price prevails; all pricing should be in the format of dollars and cents.
AGAR 452.215-72 Amendments To Proposals (FEB 1988)
Any changes to a proposal made by the offeror after its initial submittal shall be accomplished by replacement pages. Changes from the original page shall be indicated on the outside margin by vertical lines adjacent to the change. The offeror shall include the date of the amendment on the lower right corner of the changed pages.
(End of Provision)
AGAR 452.219-70 Size Standard and SIC Code Information (SEP 2001)
The North American Industrial Classification System Code(s) and business size standard(s) describing the products and/or services to be acquired under this solicitation are listed below:
Contract line item(s): All items except No. 7
--NAICS Code 113310

Page 88 of 94
--Size Standard
Contract line item(s):
500 employees
Item No. 7
--NAICS Code
--Size Standard
237310
$28.5 million
(End of Provision)
AGAR 452.237-71 Pre-Bid/Pre-Proposal Conference (FEB 1988) *(If applicable; see AGAR 437.110(b))
(a) The Government is planning a pre-bid/pre-proposal conference, during which potential Offerors may obtain a better understanding of the work required.
(b) Offerors are encouraged to submit all questions in writing at least five (5) days prior to the conference.
Questions will be considered at any time prior to or during the conference. However, Offerors will be asked to confirm verbal questions in writing. Subsequent to the conference, an amendment to the solicitation containing an abstract of the questions and answers, and a list of attendees, will be disseminated.
(c) In order to facilitate conference preparations, it is requested that the person named on the Standard Form 33 of this solicitation be contacted and advised of the number of persons who will attend.
(d) The Government assumes no responsibility for any expense incurred by an Offeror prior to contract award.
(e) Offerors are cautioned that, notwithstanding any remarks or clarifications given at the conference, all terms and conditions of the solicitation remain unchanged unless they are changed by amendment to the solicitation.
If the answers to conference questions, or any solicitation amendment, create ambiguities, it is the responsibility of the offeror to seek clarification prior to submitting an offer.
(f) The conference will be held:
Date: ________________
Time: ________________
Location: ________________
(End of Provision)

Page 89 of 94
SECTION M - EVALUATION FACTORS FOR AWARD
M.1
FEDERAL ACQUISITION REGULATION (48 CFR CHAPTER 1)
52.217-5 Evaluation of Options (JUL 1990)
M.2 EVALUATION, NEGOTIATION AND AWARD PROCESS
Proposals will be evaluated and rated to determine which Offerors are within a competitive range, price and other factors considered. Award may be made without further negotiations. Proposals should be submitted initially on the most favorable terms that the offeror can submit to the Government, from both price and technical standpoints. However the Government may, after evaluation of proposals, conduct further oral or written discussions as appropriate, with all offerors whose proposals are within a competitive range. Proposals that do not address one or more criteria or sub-factors, may not be considered further for award.
Firms lacking a past performance record (e.g., new firms or those with no relevant experience within their organization) will be treated as an unknown performance risk, receiving a neutral score in this criteria.
Award Statement . Award will be made to that offeror whose technical/cost relationship is the most advantageous to the Government. The critical factor in making any cost/technical trade-offs is not the spread between the technical ratings, but rather the significance of that difference. The significance of the difference in ratings will be determined on the basis of what that difference is and what it would cost the Government to take advantage of it. Award may not necessarily be made for technical capabilities that would appear to exceed those needed for fulfilling the requirements of this contract. The Government reserves the right to make cost/technical trade-offs that are in the best interest and to the advantage of the Government.
M.3 EVALUATION FACTORS
Proposals shall be prepared and submitted in accordance with proposal instructions contained in Section L for the evaluation factors listed below. Note: For the purposes of evaluation, the Government will consider the prime contractor and any proposed major subcontractor(s) as one entity.
Factor 1 – Technical Approach
Subfactor 1: Work Plan and Schedule
Subfactor 2: Key Personnel
Subfactor 3: Equipment
Subfactor 4: Quality Control Plan
Subfactor 5: Biopreferred Product Use
Factor 2 – Past Performance
Factor 3 – Benefits to Local Community
Factor 4 – Price
1.
The technical evaluation factors are listed in descending order of importance;
2.
All technical evaluation factors are equal in importance;

Page 90 of 94
3.
The first and second technical evaluation factors are equal in importance and together are significantly more important than the Benefits to Local Community factor.
Within each factor, all stated subfactors, if any, are [listed in descending order of importance] or [of equal importance ]. Factors and subfactors will be evaluated based on the assessed strengths, weaknesses, risks and deficiencies of each offeror’s proposal.
RELATIVE IMPORTANCE:
All evaluation factors other than cost or price, when combined, are--
Significantly more important than price
Approximately equal in importance to price
Significantly less important than price
FACTOR 1. TECHNICAL APPROACH
EVALUATION OF FACTOR 1. TECHNICAL APPROACH
The Government will evaluate the work plan and schedule subfactor for completeness, integration of service and product removal, maximization of the use of harvested material (both sawtimber and nonsawtimber), mitigation in the number of entries, schedule treatments to minimize the impact on local roads and trail use, overall understanding of the project, and extensiveness and feasibility of the proposed schedule and sequence of work.
The Government will evaluate the key personnel subfactor by considering the experience of identified key personnel, including number of similar, successfully completed projects.
The Government will evaluate the equipment subfactor by evaluating the suitability and adequacy of proposed equipment to be used on this contract.
The Government will evaluate the quality control plan subfactor by assessing how well the offeror’s narrative addressed the Quality Control Plan requirements outlined in the Quality Control Plan factor in
Section L, as well as how feasible and adequate the proposed quality control measures will be in ensuring acceptability of all work products.
The Government will evaluate the biopreferred product use subfactor by 1) evaluating how well the
Offeror identified recycled-content products, biobased products, environmentally preferable products and services, and non-ozone depleting substances to be acquired, used, and installed in the performance of this contract; and 2) by evaluating the offeror’s prior sustainable product management experience in specifying, purchasing, using, and installing bio-based products.
If the offeror will not be using recycled-content products, biobased products, environmentally preferable products and services, and non-ozone depleting substances in performance of this contract, and/or has not used them in prior projects, then they will be evaluated on the justification provided for non-use.
Provided that the offeror’s justification for not using bio-based products in performance of this contract is sufficient, the offeror may receive up to a ‘Satisfactory’ rating for this factor. Refer to 52.223-1
Biobased Product Certification and 52.223-2 Affirmative Procurement of Biobased Products Under
Service and Construction Contracts for use requirements as well as justification requirements for nonuse.

Page 91 of 94
EVALUATION OF FACTOR 2. PAST PERFORMANCE
Past Performance. Past performance is a measure of the degree to which you, as an organization, have satisfied your customers, and complied with Federal, state, and local laws and regulations. The
Government may inquire about the following elements, which are [equal in importance] [in descending order of importance] in relation to each other, (1) quality of the offeror’s work; (2) overall business relations.
There are two aspects to the Government’s evaluation of past performance. The first is to evaluate the offeror’s past performance to determine how relevant and recent the effort accomplished by the offeror is to the effort to be acquired through this source selection. The second aspect of the past performance evaluation is to determine how well the offeror has performed on the contracts by gathering information from current and previous customers of the offeror.
Government evaluators may avail themselves of various federal, state, and local past performance databases. The Government may research offeror performance on any federal, state, local, and commercial contract performance of the offeror that is known to the Government, even if the information is not provided to the Government from the offeror. Additionally, the personal experience and evaluator knowledge of offeror performance may be utilized.
The Government will consider the relevance of past performance information obtained in relation to the scope of this procurement with respect to similar efforts, the length and scope, number, and complexity.
Past performance, either positive or negative, which is considered by the Government to more closely related to the scope of this effort, will be given additional weight in the evaluation process.
Past performance of any proposed critical subcontractor that contributes positively or negatively to the overall expertise of the offeror will be considered.
Offerors with past performance data will be evaluated in the same manner as all other evaluation factors.
NOTE: Those offerors with no past performance data will be treated as an unknown performance risk and be evaluated favorably nor unfavorably. Therefore, offerors will receive credit for good past performance, lose credit for poor past performance, and neither receive nor lose credit for no relevant past performance (FAR 15.305).
EVALUATION OF FACTOR 3. BENEFITS TO LOCAL COMMUNITY
For the Benefits to Local Community Factor, the Government will evaluate (1) the extent to which the offerors proposal describes how its planned activities in performance of the project will provide a direct economic benefit to the local community, including how this benefit will be quantified; (2) the effectiveness of the offeror’s strategy and likelihood of success; and (3) potential magnitude of economic benefit to the local community.
If proposing to use local work force, the government will consider the extent of utilization of work forces from milling facilities *east, west, south, north of*_____in the state of______, woods workers who reside in the county and adjacent counties where the project is located, and sub-contractors to be employed from the city/area where the project will occur.
EVALUATION OF FACTOR 4. PRICE :
The Government will evaluate price independently of Factors 1, 2 and 3. Upon completion of evaluation of the technical factors, price will be considered in the final evaluation.

Page 92 of 94

Page 93 of 94
Instructions: See Box 10, Remarks, if extra space is needed to answer any item below. Mark X in the appropriate boxes.
1. Contractors Name, Address, & Telephone No. 2. Type of Business: (Include letter of authorization on who can bind or sign for company) see FAR 4.102
Sole Proprietor
(no letter needed)
Partnership (Copy of Agreement w/auth.)
( ) -
Email: @ .
Corporation
(Agent, authority
Non-profit
Organization
LLC
Joint Venture (All
Parties sign)
3. How many years experience do you have in this line of work? Years
4. How many years experience as a prime contractor? As a subcontractor?
5. Relevant Projects: Provide information requested in Factor 2.1
- Experience on relevant projects your business has completed in the last 3 years:
6. List below all of your firm’s contractual commitments running concurrently this solicitation
Contract
Number
Percent
Completion
Awarded
Units
Date
Contract
Completed
Contact Name,
Address, & Telephone
Number.
7a. Have you ever failed to complete any work awarded to you? Yes No
7b. Has work ever been completed by performance bond? Yes No
7c. If ‘Yes’ was checked to either item 7a or 7b, specify location(s) and reason(s) why:
7d. Did you look at the project site(s) on-the-ground? Yes No
8. Organization that will be available for this project: a.
All work performed by prime, OR Subcontracting % to be performed by sub. (Include information on Subcontractors) b.
Minimum number of employees: and Maximum number of employees: c.
Are employees regularly on your payroll? Yes No d.
Specify equipment available for this contract: e.
Estimate rate of progress (Such as acres/day, miles/day, or other rate):
Minimum progress rate: Maximum progress rate:
9. List the experience of the principal individuals of your business that will be assigned to this project:
Individuals Name Present Position
Years of
Experience
Type of Work

10. Factor 3.1 Biopreferred Product Use: a. Products to be used on this contract: (Provide justification if using non-designated products.) a.
Provide experience of using sustainable products on past contracts:
Page 94 of 94 b.
Cost of Biobased Products to be used on this contract:
11. Remarks:
12. Certification: I certify that all of the statements made by me are complete and correct to the best of my knowledge and that any persons named as references are authorized to furnish the
Forest Service with any information needed to verify my capabilities to perform this project.
(Printed Name) (Signature) (Title) (Date)