20 1 3 -201 4 Associate in Applied Technology Worksheet
Name _______________________________ SID ______________ Date _________ Advisor ______________________
Machinists operate various types of material-removing equipment such as lathes, milling machines, grinders, and computerized numerical control (CNC) machines. Some machinists specialize in the operation of one type of machine while others work in a shop where they are required to perform equally well on several different machines. Clark College's program offers instruction in numerous machine processes including the set-up and operation of the engine lathe, surface grinders, vertical mill, CNC lathes, EDM and CNC milling machines.
Program Distribution
General Education Requirements : 15 credits
C ourses listed below must be completed with a “C” or better.
Major Area Requirements : 98 credits
Courses listed below must be completed with a “C” or better.
• Communication Skills — 5 credits
• Computational Skills — 5 credits
• Human Relations — 5 credits
•
TOTAL NEEDED
0
Advising Notes & Degree Requirements
This worksheet is only for advising purposes. Official approval of credits for degree completion is subject to approval from the Credential Evaluations Office : credeval@clark.edu
• Consult with an academic advisor on a regular basis for degree completion planning. Contact the Advising Center to locate an academic advisor. Call (360) 992-2345 or visit us online at: www.clark.edu/advising
• Must earn a cumulative GPA of 2.00 in all coursework taken at
Clark College, and in all courses applied to the degree. Thirty
(30) credits minimum must be completed at Clark College to meet Academic Residency.
•
Courses do not always follow numbering sequence, please refer to the College Catalog for prerequisites and for info on quarterly class offerings refer to the Annual Class P lan n er .
= course that is currently in-progress
MACH 111 Basic General Machining Processes
MACH 112 Basic Engine Lathe Processes I
MACH 113 Basic Vertical Milling Processes I
MACH 121 Basic Surface Grinder Processes I
MACH 122 Basic Engine Lathe Processes II
MACH 123 Basic Vertical Milling Processes II
MACH 131 Basic Surface Grinder Processes II
MACH 132 Basic Engine Lathe Processes III
MACH 133 Basic Vertical Milling Processes III
MACH 241 Advanced Precision Measurement
MACH 242 Intro to CNC Lathe Conversational Prog.
MACH 243 Intro to CNC Mill Conversational Prog.
MACH 251 Tooling Concepts
MACH 252 CNC Lathe Setup and Operation
MACH 253 CNC Milling Setup and Operation
MACH 261 Advanced EDM Processes
MACH 262 Advanced CNC Lathe Prog.
MACH 263 Advanced Milling 3D Prog. and Mach.
• Related Required Classes
MACH 106 Mechanical Blueprint Reading
MACH 235 Elementary Metallurgy
MACH 23 6 Elementary Metallurgy Lab
MATH 085 Industrial Mathematics
2
5
4
2
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
TOTAL NEEDED
0
T OTAL CREDITS REQUIRED: 1 18 NEEDS: 0
Student Signature:
Advisor Signature:
Revised 0 7 / 1 5/13 Unofficial Evaluation Given to Student EPC: 808 1

NOTES:
dŚĞƐƐŽĐŝĂƚĞŝŶƉƉůŝĞĚdĞĐŚŶŽůŽŐLJĚĞŐƌĞĞŝƐĚĞƐŝŐŶĞĚĨŽƌƐƚƵĚĞŶƚƐǁŚŽǁŝƐŚƚŽĐŽŵƉůĞƚĞĂƉƌŽŐƌĂŵ
ǁŝƚŚĂƐƉĞĐŝĨŝĐƚĞĐŚŶŝĐĂůĐĂƌĞĞƌŽďũĞĐƚŝǀĞ͘^ƚƵĚĞŶƚƐĂƌĞƌĞƋƵŝƌĞĚƚŽĐŽŵƉůĞƚĞĂŵŝŶŝŵƵŵŽĨƚŚŝƌƚLJ;ϯϬͿ
ĐƌĞĚŝƚƐĂƚůĂƌŬŽůůĞŐĞƚŽŵĞĞƚĐĂĚĞŵŝĐZĞƐŝĚĞŶĐLJƌĞƋƵŝƌĞŵĞŶƚ͘^ƚƵĚĞŶƚƐĂƌĞƌĞƋƵŝƌĞĚƚŽŵĂŝŶƚĂŝŶ
ĂĐƵŵƵůĂƚŝǀĞ'WŽĨϮ͘ϬϬƚŽƌĞĐĞŝǀĞƚŚŝƐĚĞŐƌĞĞ͘
General Education Requirements
Note: Some specific requirements of a program may also meet the General Education requirements. A total of fifteen (15) credits between the three subject areas is required. You may take three (3) to five
(5) credits from the courses listed below in each area of Communication Skills, Computational Skills and
Human Relation, but the combined total needs to equal fifteen (15) credits.
Communication Skills [C] – 5 credits Select a minimum of five (5) credits from the list below:
• BTEC 107
• ENGL& 101 or 135
• ENGL 212 or BUS 211
• ENGL& 235
Computational Skills [CP] – 5 credits Complete five (5) credits from the list below:
• Math – MATH 103, 105, 111, MATH& 107or any course for which one of these is a prerequisite
• Computer Technology – CTEC 100, 101, 121
Human Relations [HR] – 5 credits Complete five (5) credits from the list below:
• Communication Studies – CMST 216, CMST&210, 230
• Business Administration – BUS& 101
• Human Development – HDEV 105, 123, 155, 186, 195, 198, 200
• Management – MGMT 101, 106, 110, 112, 120, 122, 125, 128, 132
• Psychology – PSYC&100
• Sociology – SOC& 101
• Women’s Studies – WS101
Short-Term Plan:
Summer
Specific Requirements in an Occupational Field
Students must complete the courses listed in their career plan, plus electives as needed to meet the ninety (90) credit requirement. All Associate in Applied Technology degree programs require at least seventy-five (75) credits minimum of major-related requirements.
Summer