COSMOS: Complete Online Solutions Manual Organization System
Chapter 7, Problem 64.
For the beam and loading shown, (a) draw the shear and
bending-moment diagrams, (b) determine the maximum
absolute values of the shear and bending moment.
Vector Mechanics for Engineers: Statics and Dynamics, 8/e, Ferdinand P. Beer, E. Russell Johnston, Jr.,
Elliot R. Eisenberg, William E. Clausen, David Mazurek, Phillip J. Cornwell
© 2007 The McGraw-Hill Companies.
COSMOS: Complete Online Solutions Manual Organization System
Chapter 7, Problem 70.
For the beam and loading shown, (a) draw the shear and
bending-moment diagrams, (b) determine the maximum
absolute values of the shear and bending moment.
Vector Mechanics for Engineers: Statics and Dynamics, 8/e, Ferdinand P. Beer, E. Russell Johnston, Jr.,
Elliot R. Eisenberg, William E. Clausen, David Mazurek, Phillip J. Cornwell
© 2007 The McGraw-Hill Companies.
COSMOS: Complete Online Solutions Manual Organization System
Chapter 7, Problem 76.
For the beam and loading shown, (a) draw the shear and bending-moment
diagrams, (b) determine the location and magnitude of the maximum
absolute value of the bending moment.
Vector Mechanics for Engineers: Statics and Dynamics, 8/e, Ferdinand P. Beer, E. Russell Johnston, Jr.,
Elliot R. Eisenberg, William E. Clausen, David Mazurek, Phillip J. Cornwell
© 2007 The McGraw-Hill Companies.
COSMOS: Complete Online Solutions Manual Organization System
Chapter 7, Problem 81.
For the beam and loading shown, (a) derive the equations of the shear and
bending-moment curves, (b) draw the shear and bending-moment
diagrams, (c) determine the location and magnitude of the maximum
bending moment.
Vector Mechanics for Engineers: Statics and Dynamics, 8/e, Ferdinand P. Beer, E. Russell Johnston, Jr.,
Elliot R. Eisenberg, William E. Clausen, David Mazurek, Phillip J. Cornwell
© 2007 The McGraw-Hill Companies.
COSMOS: Complete Online Solutions Manual Organization System
Chapter 8, Problem 1.
\
Knowing that WA = 25 lb and θ = 30°, determine (a) the smallest value
of WB for which the system is in equilibrium, (b) the largest value of WB
for which the system is in equilibrium.
Vector Mechanics for Engineers: Statics and Dynamics, 8/e, Ferdinand P. Beer, E. Russell Johnston, Jr.,
Elliot R. Eisenberg, William E. Clausen, David Mazurek, Phillip J. Cornwell
© 2007 The McGraw-Hill Companies.
COSMOS: Complete Online Solutions Manual Organization System
Chapter 8, Problem 12.
The coefficients of friction are μ s = 0.40 and μ k = 0.30 between all
surfaces of contact. Determine the force P for which motion of the 30-kg
block is impending if cable AB (a) is attached as shown, (b) is removed.
Vector Mechanics for Engineers: Statics and Dynamics, 8/e, Ferdinand P. Beer, E. Russell Johnston, Jr.,
Elliot R. Eisenberg, William E. Clausen, David Mazurek, Phillip J. Cornwell
© 2007 The McGraw-Hill Companies.
COSMOS: Complete Online Solutions Manual Organization System
Chapter 8, Problem 21.
A 6.5-m ladder AB of mass 10 kg leans against a wall as shown.
Assuming that the coefficient of static friction μ s is the same at
both surfaces of contact, determine the smallest value of μ s for
which equilibrium can be maintained.
Vector Mechanics for Engineers: Statics and Dynamics, 8/e, Ferdinand P. Beer, E. Russell Johnston, Jr.,
Elliot R. Eisenberg, William E. Clausen, David Mazurek, Phillip J. Cornwell
© 2007 The McGraw-Hill Companies.
COSMOS: Complete Online Solutions Manual Organization System
Chapter 8, Problem 40.
Slider A is pinned to flywheel B and slides in the slot of yoke CD. Neglecting
friction in bearings E and F and knowing that P = 8 lb and μ s = 0.25
between the slider and the yoke, determine (a) the largest couple M B for
which equilibrium can be maintained, (b) the smallest couple M B for which
equilibrium can be maintained.
Vector Mechanics for Engineers: Statics and Dynamics, 8/e, Ferdinand P. Beer, E. Russell Johnston, Jr.,
Elliot R. Eisenberg, William E. Clausen, David Mazurek, Phillip J. Cornwell
© 2007 The McGraw-Hill Companies.