Randy Rodriguez
2202 E. Bowie Ave. Harlingen, TX 78550
956-466-5558
j.randy.rodriguez@live.com
SKILLS SUMMARY
1 ½ years oilfield experience in production enhancement. Able to operate and maintain a broad range
of hydraulic fracturing equipment. Strong working knowledge of fracturing processes and running the
line. Valid CDL with Tanker and Hazmat endorsements. Fir st Aid and CPR certified.
Fourteen years of experience in Warehouse Management, Shift Management, Inventory Management
and Systems Analysis. Strong background in user training and support documentation. Experience in
system issues resolution as well as process improvement, training, cost analysis and savings. Excellent
networking skills, worked well in teams to accomplish a common goal. Fluent in Spanish and learning
French.
EXPERIENCE
Universal Pressure Pumping
Blender Operator, Line Boss, Sandst orm Operator, Frac Hand

Safe and efficient operation of Roligon Slipstream Blender. Able to rig up and rig
down blender and backside. Able to prime and pressure test. Staging acid thru
tub or bypass, running blender throughout the stage. Set up and run wireline
pump down. Maintenance of blender and able to make ready for transport.

Safe and efficient operation of frontside of the line. Able to open and close
wellhead and ground valves, pressure test and bleed down line. Walk and inspect
lines for leaks. Identify and change out bad lines, discharge hoses, chiksans, and
hammer union seals. Restrict foot traffic in red zone while pressure is on the lines
or during pumping activities. Able to effectively communicate with Data-van
throughout the treatment of the well.

Operation of Sandstorm equipment, Gravity box, Hydrabear, T-belt and deliver
Frac sand to blender in a safe, clean and efficient manner.

Maintenance of multiple hydraulic fracturing pumps including Roligon, Dragon,
Cat, Destiny, Halliburton HT-2000 and MTU’s. Able to change Packing, Seats and
Valves and trouble shoot pumps during treatment. Perform Lock out Tag out prior
to maintenance of equipment.

Rig up and rig down, Able to perform and give JSA’s for all frontside situations,
identify what PPE is needed for each specific area and job task. Prep equipment
for transport to and from well -site. Pre-trip and post trip inspection of equipment
and tractors. Perform Journey management and chain of custody documentation.
Identify and secure hazardous material, read and sign Bill of ladings.

Transport pumps, equipment, blender, data-van, flatbed, stake-bed, iron truck,
ISO chem-tanker and chemical totes.
10/14-03/15
Halliburton Energy Services
Pump Operator, Line Boss, Mountain Mover Operator, Frac Hand

Safe and efficient operation of HT-2000 and MTU hydraulic fracturing pumps.
Operate and troubleshoot Halliburton ACE 24.50 pumping software. Prime,
pressure test and run pumps during well treatment. Communicate effectively with
treater during stage and troubleshoot pumps to keep rate. Able to bring up rate
quickly and safely, bring down rate during high pressure situations. Keep track of
pump maintenance schedule and order parts. Perform Lock out Tag out prior to
maintenance of equipment.

Safe and efficient operation of frontside of the line. Able to open and close
wellhead and ground valves, pressure test and bleed down line. Walk and inspect
lines for leaks. Identify and change out bad lines, discharge hoses, chiksans, and
hammer union seals. Restrict foot traffic in red zone while pressure is on the lines
or during pumping activities. Able to effectively communicate with Data -van
throughout the treatment of the well.

Operation of Mountain Mover, Sandcastle, T-belt and deliver Frac sand to blender
in a safe, clean and efficient manner.

Maintenance of multiple hydraulic fracturing pumps including Roligon, Dragon,
Cat, Destiny, Halliburton HT -2000 and MTU’s. Able to change Packing, Seats and
Valves and trouble shoot pumps during tre atment.

Rig up and rig down, Able to perform and give JSA’s for all frontside situations,
identify what PPE is needed for each specific area and job task. Prep equipment
for transport to and from well -site. Pre-trip and post trip inspection of equipment
and tractors. Perform Journey management and chain of custody documentation.
Identify and secure hazardous material, read and sign Bill of ladings.

Transport pumps, equipment, blender, data -van, flatbed, stake-bed, iron truck,
ISO chem-tanker and chemical totes.
01/14-10/14
Penske Logistics
07/03-11/13
Systems Analyst, Trainer, Site Lead, Shipping Coordinator

Creating and maintaining user access for warehouse personnel within our warehouse shipping
system (SAP).

Identify systemic gaps, create development outlines for process improvements and possible cost
savings.

Train staff on use of SAP and new development. Served as liaison between system users and
technical support group.

Helped launch SAP implementation with other power users in 2004 spanning seven regional
manufacturing plants, two warehouse facilities and supported over 360 employees locally.

Contributions to the company include: $156,332.00 during 2005 in process improvements.
$237,630.00 in 2006 with the implementation of business cases for systemic enhancements.

Implementation of KPI (key performance indicators) database which helped improve efficiency and
lower overtime by 8% which reduced cost by $67,223.00

Put together and trained an inventory control team after the Delphi Packard Go live in Laredo, TX.
Helping stabilize material discrepancies and meet shipment windows.

Implemented SAP for Delphi Packard in El Paso, TX between 2008 through 2009. Worked with Both
Delphi and CSC to carry over knowledge transfer of previous releases, keep track of training and
identify training gaps.

Coordinated Delphi’s Products and Service Solutions warehou se through our Los Indios Penske
Location from Aug-2010 to Oct 2011.

Assisted in Delphi Packard’s WM launch at the Iasi, Romania site during August 2011.

Provided operational support and helped with process improvements at Penske’s Continental tire
warehouse from November 2011 to April 2012.

Provided operational support and helped with process improvements at Penske’s Delphi Laredo
warehouse from April 2013 thru June 2013.

Trained in Dept. of Homeland Security CTPAT (Customs -Trade Partnership Against Terrorism)
warehouse procedures consisting of Personal Security, Facility Security, Facility Security
Procedures and Shipment and Trailer Integrity.

Shipping Coordinator for Southbound Shipments going to Delphi’s Mexican Assembly Plants.
Responsibilities include coordinating southbound traffic and assigning material by urgency and
according to routes including In-Bond and Hazardous Material. Trailer inspection and securely
sealing loads using high security seals. Working with FedEx Trade Network and Unite d States
Customs in verifying and releasing bonded material to cross into Mexico.

Took part in Monthly Safety meetings with the Penske Safety team to implement several HSE
initiatives.
Penske Logistics
06/99-07/03
Inventory Control and Materials Management

Worked closely with customer contacts shipping on behalf of Delphi Automotive Systems to GM,
Ford, Chrysler, Toyota and other worldwide auto manufacturers.

Reported daily inventory to manufacturing planners and schedulers to keep daily levels available
for customer requirements.

In charge of keeping track of inbound trailers from manufacturing plants and relaying inbound
inventory to shipping department.

Processed receipts created and applied labels for all inbound purchase d material.

Assisted in implementation of several facility projects as well as providing ISO 9001 -2000
documentation for new procedures. This was part of Delphi’s “Big Squeeze” project which helped
realize a cost savings of $2.7million.
Valley Air Systems
7/98-11/98
Sales Representative

Experienced with referrals, acquiring leads and clients .

Setup in-home demos of VAS home filtration systems, filled out sales contracts and ran credit
approval applications for buyers.

Managing deposits from cliental, providing receipts and delivering VAS home filtration systems .
SYSTEMS PROFICIENCY
Software
SAP R/3, Microsoft Word, Excel, PowerPoint, Access, Outlook, Project and Visio 2010. Swish, Adobe
Photoshop, Paint Shop Pro, and Macromedia Fireworks.
EDUCATION
University of Texas at Brownsville-2006
ITECC- Business and Industry Courses

Principles of Real Estate 1&2

Law of Contracts

Law of Agency

Appraisal

Property Management

Real Estate Math
Brownsville, TX
Porter High School Class of 1999

Computer Technology Magnet program
Brownsville, TX
WM Experience Breakdown

2003-2004 - Trained 360 employees in WM, SCM, and SD as a power user for our client,
Delphi Automotive. Our distribution center launched with 7 plants simultaneously in 2004.

2005-2006- Launched 3 more plants with the consolidation of Delco Electronics and Delphi
Safety and Interiors into Delphi Electronics and Safety.

2007- Assisted Delphi Packard in Laredo, TX to train an inventory control team in WM after
launch. Also cleaned up IM and WM errors to help meet customer requirements and normalize
shipment windows.

2007-2009 - Assisted Delphi Packard and Computer Science Corporation in El Paso, TX to
launch 10 plants. Also oversaw training and made recommendations for physical and
systemic WM configuration.

2011 Supported Delphi Power Train Launching SAP WM in Iasi, Romania. Assisted in
Dynamic Data Loads, Verification of WM Data and logging WM errors and resolution.

10 years experience in SAP (WM/SD/SCM).

14 years experience in Warehousing & Distribution and Inventory control.

Worked closely with Intermec 750 Mobile Data Entry Scanners. Tested MDE configuration and
enhancements in SAP.

Made several business cases for Change Control Requests (CCR’s) in SAP that have
translated into cost savings for Delphi.