PARTS LIST AND BUILD GUIDE For Grainge and Hodder 400x900 90* CORNER BOARD PART No 1 2 3 4 5 6 7 8 9 10 11 DESCRIPTION BASEBOARD TOP END BEAM CROSS MEMBER LONG EDGE OUTER CORNERS SHORT EDGE END REINFORCEERS REAR JOINT REINFORCEMENT FRONT JOINT REINFORCEMENT ALIGNMENT DOWEL SPACER ALIGNMENT DOWEL (3MM) (6MM) QUANTITY 1 2 2 1 2 1 2 2 2 4 4 DRY RUN ASSEMBLY BEFORE GLUEING. Glue and pin* all joints unless otherwise instructed. 1. 2. 3. 4. 5. 6. 7. Lay part 1 flat then insert parts 3 into the centre sets of slots. Fix parts 4 along the long edge. Fix parts 2, 5, & 7 To form the ends using parts 9 to reinforce the front joint. Fix part 6 to the rear of the board using parts 8 to reinforce the rear joint. For joining our boards together fix 4 of part 10 alignment dowel spacers into the 25mm holes at the board ends. Then fit part 11 into the joints required. (As an option part 11 can be replaced with pattern makers dowels.) * Not supplied.