Flight Deck Door Monitoring is expected to soon be mandated across
Europe and North America. Requirements are expected to be:
Applicable to all passenger carrying aircraft in excess of 45,500 kg OR seating capacity for more than 60 passengers
“means shall be provided for monitoring from either pilot’s station the entire door area outside the flight crew compartment to identify persons requesting entry and to detect suspicious behavior or potential threat”
Skycam meets:
CAA (UK), AIL/0191
JAR OPS 1
- EUROCAE requirements, ED-123
EASA requirements
ICAO Annex 6 requirements
Future FAA requirements (including meeting “discreet crew alert” facility)
Airbus A320 Boeing 737
Classic & NG
CRJ-700 BAe-146
Boeing 757
Airbus A321
Airbus A330
• Aer Lingus – BAe-146, B737, A320, A321, A330
• Titan Airways – BAe-146, B737, B757
• Atlantic Airways – BAe-146
• Oasis International – B737
• AirClaims – B737
• Duo Airways – CRJ-700/701
• Buzz / RyanAir – B737
• Air Baltic – B737-500
SKYCAM INSTALLATION
Skycam’s installation is easy and straight forward. Skycam only interfaces with the aircraft to draw 0.5 Amp from a non-essential 28 V DC Bus. The Wiring loom provides both power to the cameras and video signal back to the VDU.
Provisioning for Skycam (the installation of camera assemblies and wiring loom) can be installed under a separate Mod. The final mod just installs the VDU into the cockpit interseat console or overhead panel, using 4 Dzus ¼ turn fasteners.
This allows Skycam to be fitted in a couple of overnight stops.
Further additions to the standard installation include; up to 16 extra cameras
(including cargo hold and external cameras), recording facility (air-rage / cargo damage disputes), extra-wide-angle cameras, zero light cameras (0.0 Lux including I.R. lamp)…
Cabin Avionics specialise in providing bespoke turnkey solutions to avionic and mechanical systems integration. Skycam can be adapted to a suit a customers particular requirements.
SKYCAM INSTALLATION cont…
A typical installation will position the VDU in the
Interseat console
Two cameras will view across the aircraft main door area (one looking port the other starboard)
The third camera will be looking axially along the aircraft at the cockpit door
SKYCAM SYSTEM COMPONENTS
The standard Skycam installation comprises of:
1 off
3 off
1 off
1 off
4” TFT Colour Visual Display Unit
Colour Camera Assemblies
Wiring loom
1 amp circuit breaker
Note:
There are a number of accessories that may be used with the Skycam system, including a video recorder, infra red cameras (i.e. Zero light), external faired cameras, and black and white wide angle low profile cameras.
Information is available upon request.
Video Signal
Power supply
SKYCAM SYSTEM COMPONENTS
1 Amp Circuit Breaker
28 V DC Bus
Optional
Extras
SKYCAMs Visual Display Unit
4” Colour Display
Standard Dzus rail mounting -
5.75” x 4.45” x 2.6” (deep)
Low power consumption
Day/Night switch
4 x Video Camera Inputs
(expandable up to 16 cameras)
Record output (switch optional)
Camera select switch
Facia plate colour/text options
NTSC/PAL auto switching
Discreet Crew Alert (new option)
SKYCAMs Camera Assemblies
Colour
Auto-focussing
Auto-contrast
Auto-lowlight (0.1 Lux)
Four styles of brackets/housing
Adjustable position on installation
High definition
0.0 Lux Infra Red cameras available
Assembly to match colour of interior trim
European Aviation Safety
Agency (EASA) approved
United Kingdom, Civil
Aviation Authority approved.
CAA AIL/0191 compliant
RTCA/DO-160D qualified for flight deck use
Equipment released with an
EASA Form One.
Meets ED-123.
Meets ICAO Annex 6 requirements.
Meets JAR-OPS 1 requirements.
Will meet new FAA requirements.
SKYCAM CERTIFICATION
Our company representatives sat on the
EUOCAE Working Group to produce
ED-123. This document is expected to be the basis for European (and global) legislation.
A COMPLETE PACKAGE
Certification Documents Supplied
A complete EASA approved design and certification package plus associated drawings for the Skycam system. Documents supplied include: Installation
Drawings; Electrical Load Analysis Supplement; Ground Test Schedule; Weight and Balance Data; Maintenance Manual and IPC Supplements…
System Price (Per Aircraft): Price on application
Discount available on multiple orders
Skycam Visual Display Monitor
3 off - Camera Assembly
Installation Modification Kit (3 camera system)
All modification and certification documents
Optional Camera Kit (Camera No.4): Price available on request
1 off
– Standard High Resolution Colour Camera Assembly
Installation Modification Kit
Note: Other options available
– contact Cabin Avionics Ltd
SKYCAM REVIEW
Fast And Simple Installation (30-50 man hours approx.)
No Video Processor necessary reducing installation costs
Only Interfaces With The Aircraft At One Point (28 V DC Bus)
High Definition Colour Cameras With High Quality VDU (4” Display)
Standard System Is Lowlight Capable (0.1 Lux) – 0.0 Lux I.R. Available
In Service With Many Operators On Various Platforms With Excellent
Reviews From Flight Crew
Low Cost – High Capability Solution To Today's Security Issues
Can Be Expanded To Include 16 Cameras!
Can Be Utilised With Recording Facility (extra)
Can Be Used To Monitor/Record Freight Hold Activity (Court Room
Evidence) – solid-state digital video recorder available
EASA approved. FAA approvals can be obtained through our DER
Contact Cabin Avionics to discuss options and to arrange a demonstration.
Bournemouth Aviation
Kingshott Business Centre
23 Hinton Road
Bournemouth
BH1 2EF
UNITED KINGDOM
Tel: +44 (0) 1202 557670
Email: sales@skycam.aero
Web: www.cabinavionics.co.uk
Web: www.skycam.aero & www.fddms.com