Wood Group Gas Turbine Services
KEEP ON TURNING KEEP ON TURNING KEEP ON TURNING
PRODUCT CAPABILITY
Summary of contents
Services for:
1. Gas turbines – light industrial, aero-derivative & heavy industrial
2. Steam turbines
3. Generators & Motors
4. High-speed rotating equipment
5. Accessories & Components
6. Controls
7. Balance of Plant
Integrated Service Solutions
1. Integrated Plant Solutions
2. Operations & Maintenance
3. Power Solutions & EPC Services
4. Industrial Energy Services
GTS – services for gas turbines
LIGHT INDUSTRIAL TURBINES (LIT)
PRODUCT CAPABILITY
SERVICES
•
•
Engine overhaul & performance test
•
Advanced technology component
repair
•
Field Service
•
Supply of new, refurbished and AP ®
(Advanced Parts Manufacture) parts
•
Control system repair and upgrades
•
Fuel system repair
•
Tailored long term maintenance
contracts
•
Purchase and sale of power
generation packages and CHP plant
•
Supply of lease/service exchange
engines
•
Siemens TA, TB, TD, Tornado (SGT-200),
Typhoon (SGT-100)
Solar Saturn® 10, Centaur® 40/50,
Taurus™ 60, Mars® 90/100
• Saturn®, Centaur®, Taurus™ and Mars® are trademarks of Solar Turbines, Inc.
• WGLIT services may be subject to certain restrictions in some countries
• APM® is a registered trademark of Wood Group
GTS – services for gas turbines
AERO-DERIVATIVE GAS TURBINES
PRODUCT CAPABILITY
SERVICES
•
•
Engine overhaul & performance test
•
Advanced technology component
repair
•
Field service
•
Spare parts supply
•
Control system repair and upgrades
•
Fuel system repair
•
Long term maintenance contracts
Rolls-Royce Avon, RB211, Olympus, 501K,
570/571 series gas turbines, Rolls-Royce Power
Turbines
•
General Electric LM2500, LM2500+, LM2500
6Stg Power Turbine, LM5000, LM6000
•
Pratt & Whitney GG3, GG4/FT4
GTS – services for gas turbines
HEAVY INDUSTRIAL TURBINES (HIT)
PRODUCT CAPABILITY
SERVICES
•
Alstom GT9, GT11, GT13
•
•
General Electric Frame 3, Frame 5, Frame 6,
Frame 7, Frame 9
Advanced technology component
repair
•
•
Mitsubishi MW101, MW251, MW501, MW701
Field service and outage
management
•
SiemensWestinghouse W101, W251, W501,
W701, V64, V84, V94, GT10
•
Supply of new, refurbished and APM®
®
(Advanced Parts Manufacture) parts
•
Inventory management
•
Rotor overhaul
•
Fuel system repair
•
Long term maintenance contracts
•
Technical direction
APM® is a registered trademark of Wood Group
GTS – services for steam turbines
STEAM TURBINES
PRODUCT CAPABILITY
SERVICES
•
5MW – 1000MW
•
•
OEMs including
-ABB
-AEI
-Alis Chalmers
-Allen
-Alstom
-Ansaldo
-Bellis & Morcom
-BBC
-CEM
-Delaval
-Elliott
-English Electric
-Franco Tosi
-GE
-GEC
-LMZ
-MAN
-Mitsubishi
-Parsons
-Siemens
-Thermodyn
-Turbodyn
-Westinghouse
-Worthington
•
Field Services
•
Overhaul
•
Inspection
•
Outage management
•
Maintenance
•
Relocation
•
Installation
Component repair solutions
•
Rotor blade weld repair
•
Nozzle & diaphragm repair
•
In situ rotor blade weld repairs
•
Component life extension
GTS – services for generators & motors
GENERATORS & MOTORS
SERVICES
•
Field outage support
PRODUCT CAPABILITY
•
Inspection
•
Testing
Providing fully integrated, ISO 9001:2000
certified services for most makes and
models of generators and low, medium
and high voltage motors including the
manufacture of high quality OMEGAPac™ and OMEGA-Vac™ windings.
•
Repairs
•
Modifications
•
Rewinds
•
Low, medium & high voltage coil manufacture
•
Shop services
•
Generator & motor inspections/testing
•
Reconditions, rehabilitations & repairs
•
Complete & comprehensive in-house
machining capabilities
•
14’ vacuum pressure impregnation (VPI)
facilities
•
Generator & motor stationary and
rotating element rewinds
•
100,000lb capacity high-speed balance
facilities
•
13,800 VAC motor test & diagnostic
facilities
OMEGA-Pac™ and OMEGA-Vac™ are trademarks of Wood Group
GTS – services for high-speed rotating equipment
HIGH-SPEED ROTATING EQUIPMENT
PRODUCT CAPABILITY
SERVICES
•
Pumps, compressors, Power Turbines,
gearboxes, turbochargers
•
•
OEMs including
-Cooper
-Dresser-Rand
-Ebara
-Elliott
-Hispano Suiza
-Kongsberg
-Nuovo Pignone
-Sulzer
-Taylor
-UCP
-Weir
•
•
•
Maintenance, overhaul and upgrade of
rotating machinery and associated
equipment
Manufacture of re-engineered spare
parts
Management of long-term contracts
including technical support, plant
operation, maintenance programme
enhancement and reliability
improvement
Full performance testing of pumps and
compressors
GTS – services for accessories & components
ACCESSORIES & COMPONENTS
PRODUCT CAPABILITY
Accessories & Component MRO for
SERVICES
•
•
Accessory MRO Services for:—
Fuel, Nozzles, Pumps, Controls, Valves
—
Oil, Lube and Scavenge Pumps, Valves,
—
Air, Bleed, Staging and Flow Control Valves
Electrical MRO Services for:—
Harnesses, Thermocouples, Speed and Temperature
Sensors
—
EGT Harnesses
•
Rolls-Royce Avon, RB211, Olympus, 501K, Spey, 570/571
Turbines
•
General Electric LM1600, LM2500, LM2500+, LM5000, LM6000,
Frame 3, 5, 6, 7, 7FA and 9FA Turbines
•
Pratt & Whitney GG3, GG4/FT4, GG8, FT8 Turbines
—
Compressor blades and vanes
•
Siemens TA, TB, TD, Tornado (SGT-200), Typhoon (SGT-100)
Turbines
—
Hot Section Components
—
Rotating and Stationary Seals
•
Solar Saturn®, Centaur®, Taurus™, Mars® Turbines
—
Honeycombs
•
Alstom GT13E2
—
Structural Cases, Components
•
Siemens Westinghouse W501, W701, V64, V94
•
•
Component Repair MRO Services for:-
Advanced Repair Technologies and Development
—
Laser and Electron Beam Welding
—
Hydrogen Fluoride Cleaning
—
Vacuum and Induction Brazing
—
Plasma Spray, Coating Services
•
OEM Authorised Service Centres
•
Rotable Exchanges and Spare Parts Supply
• Saturn®, Centaur®, Taurus™ and Mars® are trademarks of Solar Turbines, Inc.
• WGA&C services may be subject to certain restrictions in some countries
• APM® is a registered trademark of Wood Group
GTS – services for controls
CONTROLS
PRODUCT CAPABILITY
SERVICES
Control systems for
•
Control system upgrade / replacement
•
•
Balance of Plant (DCS) controls
•
Service, support & troubleshooting
Light industrial, aero-derivative & heavy
industrial gas turbines
•
Utility & industrial steam turbines
•
Hydro turbines
•
Reciprocating engines
•
Generators, compressors & pumps
•
AGC (Automatic Generation Control)
•
•
•
Callout service
•
Installation & site supervision
•
Turnkey site services
•
Long term service agreements
•
Spare parts/repairs
On-line monitoring
•
Remote data services
•
Support for O&M
Local, central & remote control consoles
(HMI), upgrades or addition
GTS – Balance of Plant services
BALANCE OF PLANT SERVICES
In addition to rotating equipment,
GTS can support operators’ entire
Balance of Plant (BoP) service
requirements
PRODUCT CAPABILITY
•
Generators
•
Gears
•
Oil systems
•
Intake systems
•
Exhaust systems
•
Fuel supply systems
•
Fire extinguishing equipment
•
Gas warning systems
•
Ventilation systems
•
Oil mist separators
•
Compressor wash systems
•
Safety equipment, eg, shut-off valves
GTS – integrated service solutions
INTEGRATED PLANT SOLUTIONS
Delivering customized turnkey plant solutions to asset owners in the Energy
and Oil & Gas Industry by sharing and managing the owner’s risks and
delivering the world-class knowledge, services and products of Wood Group.
•“One-Stop Shop” for your entire fleet of rotating equipment
• Personalized creative solutions to meet individual customer needs
• Customized guarantees and warranties based on aligned goals and
incentives
• Flexible contract structures and plain language contracts
• Flexible payment terms tailored to specific project requirements
• Efficient risk management that reduces our customers’ long term operation
and maintenance costs
GTS – integrated service solutions
OPERATIONS & MAINTENANCE
Providing full service operations and maintenance solutions to power
generation asset owners worldwide.
O&M SERVICE PRODUCTS
O&M PROGRAMS
•
Operability reviews
•
Administrative procedures
•
Mobilization services
•
Employee qualifications & training
•
Peak season or interim O&M labor and
maintenance services
•
HS&E manuals & processes
•
Maintenance management systems
•
Predictive maintenance
•
Inventory management
•
Warranty
•
O&M procedures
•
Performance based care, custody,
control O&M services
•
Integrated O&M and major
maintenance services
GTS – integrated service solutions
POWER SOLUTIONS & EPC SERVICES
Engineering, design, erection and installation of balance of plant
equipment and gas turbine generators for simple cycle and combined
cycle power plants worldwide.
PRODUCTS SERVED
SERVICES
•
Engineering
•
Design
•
Procurement
•
Construction
Siemens
•
Installation
•
GE Frame equipment
•
Balance of Plant
•
Boilers
•
Start-up
•
STG
•
Commissioning
•
GenSets
•
Project management
•
Substations
•
Spare parts support
•
GE LM2500, LM5000, LM6000
•
Rolls-Royce RB211
•
Solar
•
GTS – integrated service solutions
INDUSTRIAL ENERGY SERVICES
Providing manufacturers and industrials with services to control costs,
improve productivity, enhance reliability in their energy operations and
deliver results for the long term.
PROJECT EXPERIENCE & CAPABILITIES
SERVICES
•
Co-generation & combined heat and
power
•
•
Alternative fuels & waste-to-energy systems
•
Industrial utilities: compressed air, cooling
water, steam & others
•
Energy efficiency
•
Process optimization
•
•
Project services
• Energy project development
• Detailed engineering
• Turnkey implementation
Asset services
• Energy asset O&M
• Outsourcing solutions
• Long-term service
Capital services
• Merchant energy investments
• Own-and-operate solutions
• Structured project finance
Wood Group Gas Turbine Services
ENERGY SUPPORTING ENERGY