Philippine Institute of Industrial Engineers

advertisement
PHILIPPINE INSTITUTE OF INDUSTRIAL ENGINEERS
CEBU CHAPTER
INDUSTRIAL ENGINEERING CERTIFICATION BOARD
WELCOMES YOU TO A FORUM FOR….
CERTIFIED INDUSTRIAL ENGINEERING EXAM
AND
PORTFOLIO REVIEW FOR
PROFESSIONAL INDUSTRIAL ENGINEERS
PHILIPPINE INSTITUTE OF INDUSTRIAL ENGINEERS
CEBU CHAPTER
INDUSTRIAL ENGINEERING CERTIFICATION BOARD
Announcement:
Now accepting application for 2nd Certified Industrial
Engineer Examination (CIE).
Deadline of submission of application: October 21, 2010.
Examination Date: November 21, 2010
For more information, contact IECB Secretariat at 879-8103/879-8381 or email us at iecb@pldtdsl.net.
Or you can contact the PIIE Cebu Chapter Officers for more information
PHILIPPINE INSTITUTE OF INDUSTRIAL ENGINEERS
CEBU CHAPTER
INDUSTRIAL ENGINEERING CERTIFICATION BOARD
1st IECB Certification Examination
The Philippine Institute of Industrial Engineers (PIIE) - through the
Industrial Engineering Certification Board (IECB); administered the 1st
Industrial Engineering Certification Examination last May 23, 2009 at the
Procter and Gamble Auditorium, College of Engineering, University of
the Philippines, Diliman, Q. C.
The historic examination is participated by new graduates of B.S. in
Industrial Engineering and those with less than 10 years of relevant
experience. Sixty examinees took the first nationwide CIE examination
and 30 of them successfully passed.
PHILIPPINE INSTITUTE OF INDUSTRIAL ENGINEERS
CEBU CHAPTER
INDUSTRIAL ENGINEERING CERTIFICATION BOARD
This figure represents a 50% national passing rate.
1st place - Mr. Amando A. Radomes, Jr. - University of San Carlos (Cebu)
2nd place - Mr. Francis Emmanuel C. Otadoy - University of San Carlos (Cebu)
3rd place - Mr. Christopher E. Tupaz - Adamson University
4th place - Ms. Precie O. Daño - University of San Carlos (Cebu)
5TH place - Mr. Reinevic L. Ureta University of San Jose-Recoletos
Irish T. Dakay - University of San Carlos (Cebu)
- 87.00%;
- 81.17%
- 79.71%.
-78.74% 5TH
-77.77%
- 77.77%
PHILIPPINE INSTITUTE OF INDUSTRIAL ENGINEERS
CEBU CHAPTER
INDUSTRIAL ENGINEERING CERTIFICATION BOARD
The CIE examination was the product of a series of dialogues and consultations among
academe, industry practitioners and international counterparts. It is an important initial
step to enhance and professionalize the practice of Industrial Engineering (IE) in the
country.
The program BSIE was first offered into the country by Adamson University in 1935 and
since then it continues to evolve in a very dynamic curriculum producing graduates that
are in demand in the service and manufacturing sectors. IE focuses on continuous
improvement, productivity, systems and operational excellence and many of its graduates
occupy key management positions in various companies.
In any industry, professional certification is valuable to promote a clearer public
awareness and adds credibility and respect.
PHILIPPINE INSTITUTE OF INDUSTRIAL ENGINEERS
CEBU CHAPTER
INDUSTRIAL ENGINEERING CERTIFICATION BOARD
Philippine Institute of Industrial Engineers (PIIE) provides leadership for developing the
industrial engineering profession and is dedicated to advancing the technical and
managerial excellence of industrial engineers, with a regulatory advocacy leading toward
standardized academic curriculum and globally recognized professional certification.
IECB Email
You may contact IECB through email at: iecb@pldtdsl.net
IECB Secretariat Office
The IECB Secretariat Office address is at the Pacific Coast Plaza Condominium in
Parañaque.
G/F Pacific Coast Plaza, Tambo, Parañaque City 1701, Philippines
Tel: (632) 879-8381
Telefax: (632) 879-8103
PHILIPPINE INSTITUTE OF INDUSTRIAL ENGINEERS
CEBU CHAPTER
INDUSTRIAL ENGINEERING CERTIFICATION BOARD
What is IE Certification?
IE Certification is a voluntary process, which validates an individual's qualifications in the
field of industrial engineering (IE) professional practice.
It demonstrates to employers, clients, and peers the individual's knowledge and
experience and signifies his or her commitment to continued excellence in IE professional
practice.
In addition, it increases visibility, builds credibility, and validates expertise with those
outside the profession
PHILIPPINE INSTITUTE OF INDUSTRIAL ENGINEERS
CEBU CHAPTER
INDUSTRIAL ENGINEERING CERTIFICATION BOARD
The IE Practitioner
A practitioner is defined as an individual who has:
1. A mastery of basic industrial engineering knowledge
2. A command of the methodologies used by industrial engineers in
applying that knowledge to the design of a product, process,
or environment; and
3. Has applied his or her knowledge to the analysis, design, test,
implementation and evaluation of products, processes, and
environments.
PHILIPPINE INSTITUTE OF INDUSTRIAL ENGINEERS
CEBU CHAPTER
INDUSTRIAL ENGINEERING CERTIFICATION BOARD
Why Get Certified?
1. Mark of a professional
Help promote a clearer public awareness and understanding of the
role of the IEs in society, and to aid in ensuring that fellow IEs
perform their services in a manner which recognizes as paramount
public health and safety
Employers look to licensure or certification in evaluating the
advancement potential of employees
PHILIPPINE INSTITUTE OF INDUSTRIAL ENGINEERS
CEBU CHAPTER
INDUSTRIAL ENGINEERING CERTIFICATION BOARD
2. Enhanced status in the eyes of the public
Equates the industrial engineer with other professionals licensed in
other fields.
Assurance that the individual IE has passed at least a minimum
screen of competence.
3. Adds credibility and respect
It polishes one’s reputation as a qualified industrial engineer
PHILIPPINE INSTITUTE OF INDUSTRIAL ENGINEERS
CEBU CHAPTER
INDUSTRIAL ENGINEERING CERTIFICATION BOARD
Certification Levels
Level 1 The Certified Industrial Engineering (CIE)
The CIE is the designation for associate practice.
The criteria for CIE certification are:
1. An Active PIIE member
2. A Filipino citizen
3. A bachelor’s degree in Industrial Engineering from CHED-recognized school/university
with an accredited B.S.I.E. program or an internationally accredited program
4. A passing score on the CIE written examination on IE Core Knowledge.
The CIE applies a general breadth of knowledge to analysis and evaluation. He should
exhibit the minimum standards of competency for Industrial Engineering practice. The
scope of practice for the CIE is limited to the use of commonly accepted tools and
techniques for the analysis and enhancement of performance in existing systems.
PHILIPPINE INSTITUTE OF INDUSTRIAL ENGINEERS
CEBU CHAPTER
INDUSTRIAL ENGINEERING CERTIFICATION BOARD
Level 2 The Professional IE (PIE)
The PIE is the designation for professional practice.
The criteria for PIE certification are:
1. Filipino citizen/ naturalized (NSO certified)
2. CIE + masters degree + 2 years experience OR CIE + 5 years experience
3. Testimonial of major IE work experience
4. Passing score in PIE Exam
The PIE applies and develops methodologies for analyzing, designing, testing, and
evaluating systems. The professional practitioner addresses complex problems and
advances industrial engineering technologies and methods in his/her area of
specialization.
PHILIPPINE INSTITUTE OF INDUSTRIAL ENGINEERS
CEBU CHAPTER
INDUSTRIAL ENGINEERING CERTIFICATION BOARD
Level 2 The Professional IE (PIE)
Areas of Specialization:
1. Production & Manufacturing Systems
2. Operations Research
3. Quality Engineering
4. Human Factors and Ergonomics
5. Service & Management Systems
6. Supply-Chain Management/Logistics
Renewable every three years
`
PHILIPPINE INSTITUTE OF INDUSTRIAL ENGINEERS
CEBU CHAPTER
INDUSTRIAL ENGINEERING CERTIFICATION BOARD
CIE GENERAL APPLICATION PROCEDURE
1. The applicant obtains an application form from the Office of the IECB
Secratariat and pays the application fee of PHP 500 for CIE applicants
Alternatively, the downloadable version of the Application Form and
Recommendation Forms may be printed and the application fees paid upon filing
of the application.
2. Non-PIIE members who wish to apply for PIIE membership and PIIE members
who wish to renew their membership should visit the PIIE website at
[www.piie.org] for application and membership renewal details.
`
PHILIPPINE INSTITUTE OF INDUSTRIAL ENGINEERS
CEBU CHAPTER
INDUSTRIAL ENGINEERING CERTIFICATION BOARD
STEPS:
1. The applicant fills out and submits the forms together with the other requirements by the
deadlines set by the IECB.
2. Payment of application fee can be done at the office of the IECB Secretariat or through
bank deposit.
Check payments should be payable to Philippine Institute of Industrial Engineers. For bank payments,
please contact the IECB Secretariat for bank details. The deposit slip should be faxed or mailed to the
IECB Office for confirmation.
3. The IECB will mail the exam permit (for CIE applicants) and the official receipt to the
mailing address within one week upon confirmation of bank
payment.
Each application should be accompanied by:
- a filled-out Application Form and one (1) photocopy using IECB-CIE Form No. 2
- authenticated/Certified true copy of Transcript of Records or Diploma
- four (4) colored 2” x 2” size ID pictures
- NSO/LGU certified birth certificate or naturalization documents
- application fee of PHP 500.00.
applicant's
PHILIPPINE INSTITUTE OF INDUSTRIAL ENGINEERS
CEBU CHAPTER
INDUSTRIAL ENGINEERING CERTIFICATION BOARD
Note:
Successful CIE applicants should personally confirm their registration to the IECB
Secretariat during the scheduled registration period for CIE certifications.
Successful applicants will also be scheduled for the oath-taking ceremony where
their presence is also required.
`
PHILIPPINE INSTITUTE OF INDUSTRIAL ENGINEERS
CEBU CHAPTER
INDUSTRIAL ENGINEERING CERTIFICATION BOARD
PIIE Certification Committee
Chair
Vice Chairman
Registrar
Secretary
Treasurer
PRO
- Aura C. Matias (University of the Philippines-Diliman)
- Anthony Chiu (De La Salle University -Manila)
- Venusmar Quevedo (Adamson University)
- Miriam Necesito (Philippine Women’s University)
- Florendo Maranan (Bank of the Philippine Islands)
- Marnie Mañalac (Meralco)
Members
Rene Domingo (Asian Institute of Management)
Rodel Adiviso (Philippine Chamber of Industrial Estates)
Marilyn Mabini (University of Santo Tomas)
PHILIPPINE INSTITUTE OF INDUSTRIAL ENGINEERS
CEBU CHAPTER
CIE CERTIFICATION SERVICES FOR November 21, 2010:
1. Application assistance for Chapter members
coverage:
- application screening and review
- facilitating
2. Organize Review Sessions in cooperation with CIE topnotchers
(to be discussed in the breakout session – limited seats)
3. Exam Day Assistance Services
- meals preparation/facilitation
- transport facilitation
PHILIPPINE INSTITUTE OF INDUSTRIAL ENGINEERS
CEBU CHAPTER
PIIE CEBU CHAPTER
CIE REVIEW SERVICES PROPOSAL
1.
2.
3.
4.
5.
6.
25 PAX REVIEW CLASS CAPACITY – FIRST- COME -FIRST-SERVED BASIS
DEADLINE OF CIE REVIEW REGISTRATION – May 31 , 2010
VENUE – TO BE FINALIZED IF USJ-R OR USC-TC
3 X PER WEEK (10 HRS PER WEEK)
M-W-F
17 WEEKS SCHEDULE
PHILIPPINE INSTITUTE OF INDUSTRIAL ENGINEERS
CEBU CHAPTER
PHILIPPINE INSTITUTE OF INDUSTRIAL ENGINEERS
CEBU CHAPTER
Note s :
No.
Particulars
1
Review Schedule
2
Orientation
3
Diagnostic Exam
4
A ssessment
Re m ark s
Monday, Wednesday, and Friday at 6:00-9:00PM; Midterms and Finals shall be administered on
The f ollow ing shall be discussed: review structure; scope f or each module; house rules; review ees'
A 60-item exam to measure the review ee's stored know ledge in any of the f our modules.
Evaluation of review ees' diagnostic exam results. This aims to determine the w eak areas that need to
A
ENGINEERING SCIENCES:
Mechanics
Strength of Materials
Chemistry
Thermodynamics
Electronics
B
WORK STANDARDS/ INFORM ATION SYSTEM :
-Methods Engineering
-Ergonomics
-Industrial Organization/ Management
-Environmenctal Science
7
C
PRODUCT PLANNING:
Quality Control
-Production Planning/ Operations Management
-Engineering Economics
-A ccounting
-Marketing
8
D
OPTIM IZATION:
-Probability and Statistics
-Operations Research
-Total Quality Management
9
10
11
12
A sterisk (*)
Exam
Formula Exam
Ice Breaker
13
Midterms
14
Midterm Break
15
Coaching
5
6
16
Ref resher
17
Final Coaching
18
Finals
Indicates that a 20-item exam shall be administered regarding the previous session's topics.
A 60-item exam to measure the review ee's learning in all of the f our modules.
A ssessment on how much f ormulas has the review er memorized.
Games that shall measure the accuracy and speed of the review er to solve problems.
A 200-item exam, 50 items per module, that shall be administered on a Sunday. Modules A and B are
f rom 8:00-12:00NN; w hile Modules C and D are f rom 1:00-5:00PM.
a f ive-day break af ter the Midterms. Sessions shall resume on the f olow ing Monday.
Review ees shall be given a set of notes that shall be read throughout the session. Short diagnostic
exam may be given to assess the learning of the review ee.
A 30-item exam shall be administered in the f irst hour of the session. A ll the solutions shall be
discussed on the rest of the session.
V arious review materials shall be given randomly. Evaluation may be done through exams.
This is a simulated Certif ication Exam. A 200-item exam, 50 items per module, that shall be
administered on a Sunday. Modules A and B are f rom 8:00-12:00NN; w hile Modules C and D are f rom
1:00-5:00PM.
PHILIPPINE INSTITUTE OF INDUSTRIAL ENGINEERS
CEBU CHAPTER
CIE REVIEW FEES AND PAYMENT SCHEME
PIIE MEMBERS
1. 6,500 PhP/pax
2. 1ST INSTALLMENT = 3,000.00 PhP on or before May 31, 2010
3. 2ND INSTALLMENT = 2,000.00 PhP on or before Sept 13, 2010
4. 3RD INSTALLMENT = 1,500.00 PhP on or before Oct 18, 2010
5. IF YOU PAY FULL AMOUNT ONE TIME (on or before May 31),
you pay only 6,000.00 PhP.
NON-PIIE MEMBERS
1. 7,000.00 PhP (review fee) + 1,500 PhP (membership fee) = 8,500 PhP /pax
2. 1ST INSTALLMENT = 4,000.00 PhP on or before May 31, 2010
3. 2ND INSTALLMENT = 3,000.00 PhP on or before Sept 13, 2010
4. 3RD INSTALLMENT = 1,500.00 PhP on or before Oct 18, 2010
5. IF YOU PAY FULL AMOUNT ONE TIME (on or before May 31),
you pay only 7,500.00 PhP.
NOTE: YOUR FEES GOES TO THE REVIEWER FEES, BOOKS/HANDOUTS, AND VENUE RENTAL PLUS OPERATING FEES FOR
FACILITATION
PHILIPPINE INSTITUTE OF INDUSTRIAL ENGINEERS
CEBU CHAPTER
CIE REVIEW FEES AND PAYMENT SCHEME
BREAKDOWN OF FEES EXPLAINED…
1. Divided by 17 weeks = 411.76 PhP/week
2. Divided by 10 hours per week = 41.18 PhP/hour
Where can you find classes that charge less than 100.00PhP per hour?
A REVIEW CLASS HANDLED BY TOPNOTCHERS, SUPPORTED BY
EXPERIENCED INDUSTRIAL ENGINEERS….
MY FRIENDS, SEATS ARE LIMITED FOR THE REVIEW (25 PAX CAPACITY)…..
CONTACT YOUR NEAREST PIIE CEBU CHAPTER OFFICERS RIGHT NOW!!!
Download