Distributors of the
Performix Range of Products
Located at
22 Campbell Street
Bowen Hills. QLD 4006
Telephone: (07) 3525 7466
Fax: (07) 3525 2862
• The PERFORMIX RANGE of PLASTI DIP products, has been manufactured and distributed in the U.S. by PlastiDip
International for over 30 years.
• Plasti Dip is both a 'unique' and 'niche' product range;
America's largest selling flexible rubber coating.
• Plasti Dip is equally at home in a wide range of retail outlets including Electrical, Automotive, Marine and the potential applications are enormous.
• Following is an overview of the Plasti Dip product lines.
• Plastidip
-
Dip
"It's like Duct Tape in a can" -
America's No.1 Flexible Rubber Coating
• PLASTI DIP® is an air dry, synthetic rubber coating that can be easily applied by spraying, brushing or dipping.
• PLASTI DIP® resists moisture, acids, abrasion, weathering, electrical shock, skidding/slipping, corrosion. Non-skid grit can also be added.
• PLASTI DIP® won’t peel, chip or crack!
• PLASTI DIP® can be used in D.I.Y, electrical, marine and industrial applications and harsh environments to seal out moisture and weatherproof most surfaces including metal, wood, concrete, rubber and plastics.
• PLASTI DIP® is available in UV Formula.
• COLOURS: Red, Yellow, Black, Blue, White and
Clear.
• PLASTI DIP® can be tinted any colour with approved tints or larger quantities can be ordered in any colour direct from the factory.
• Plastidip-Spray On
"The Dip - in an
Aerosol!"
• Offers the effectiveness of PLASTI DIP® and the convenience of a spray can.
• Ideal for refinishing outdoor furniture, gas bottles, hard to reach places and pre-assembled complex equipment, that needs protection from the elements including, boat instrument panels, control panels and electronic components in the agricultural and mining environment.
• Offers UV Protection.
Electrical
•
Used to seal underground wiring
• Seals holes in electronic circuit boards
• Waterproof outdoor connections & connectors
• Coat exposed solder joints on circuit boards
•
Eliminate vibration on RF connections
•
Waterproof robot electronics
•
Coat electrical transformers for raceway power track
• Coat micro-receiver & electronics on a model submarine
• Coat electronic thermometer probe
•
Insulate solid copper wire on electrolytic tanks
•
Used on compression terminal block
• Waterproof/insulate soldered connections for outlet boxes
• Keep moisture out of exterior coax connectors
• Colour code & insulate toggle switches
•
Eliminate corona leakage of coils
•
Repair extension cords
• Seal electronic box holes
• Seal silver foil speaker cables
• Recoat "mittens" from alligator clips
• PlastiDip Thinners -
Use
With PlastiDip® Multi-
Purpose Rubber Coating
• This product was formulated specifically for use with
PLASTI DIP® where a thinner application is desired.
• Use With Plasti Dip® Multi-Purpose Rubber
Coating
• DIP® PRIMER is an air dry, acrylic primer specifically developed to increase adhesion of PLASTI DIP® to metals up to 400%.PRIMER can be sprayed, dipped or brushed and offers fast set up time with a high coverage rate.
•
Typically applied in one coat, only extreme corrosion and abrasion require a second or third coat, eliminating extensive preparation for most applications.
• PLASTI DIP® PRIMER is recommended on: All metal surfaces, especially galvanized, to prevent peeling of PLASTI DIP®.
• For best results apply PLASTI DIP® over PRIMER as soon as it is dry to the touch. PLASTI DIP® PRIMER is not recommended for use as a protective coating on its own.
•
Available in
.946ltr, 3.78ltr, 19.8ltr, 214ltr Drum
Non Slip Fabric Coating
• Super Grip
America's No.1 Non skid Rubberized
Coating
• Super Grip® is an air-dry, non-yellowing, synthetic rubber coating that bonds to most types of fabrics to prevent skidding and slipping on slick surfaces, is washable, remains flexible and will not transfer from applied surface to any other surface.
• Super Grip® is a non-skid coating that is applied to the back of rugs, mats or panels and prevents them from slipping when in place.
• Super Grip® forms a soft pliable rubber film on the surface that completely eliminates skidding. Ideal for rugs, bath mats, vehicle floor mats and much more.
• Colour: Clear
• Housewares for boats and RV’s
• Fabric Cushions
• Place Mats
• Tablecloths
• Pants or clothes hangers
• Athletic Grips on sports equipment
• Tool Handles
Throw Rugs Bath mats Athletic Grips Slip Covers
•
Liquid Electrical Tape
America’s No 1
Dielectrical Coating
•
Liquid Electrical Tape is an air-dry, synthetic rubber coating that can be brushed on and exhibits excellent moisture, acid, alkaline, abrasion, and dielectric resistance.
• Liquid Tape can be used in manufacturing to insulate, protect, and colour code connections. It remains flexible even under extreme conditions and won't crack, harden, or peel.
• Liquid Electrical Tape has a dielectric rating and is ideal for insulating D.C. connections, PCB boards, battery terminals, switches, solenoids or any component parts that need electrical insulation and protection from the elements. Protects against battery acid, salt water and is UV protected.
• Available Colours: Black, White, Red, Green.
• New Liquid Tape Electrical Spray
• Takes the place of electrical tape by providing electrical insulation to hard-toreach place
• Winner of SEMA:
•
The 2006 PM Editor's Choice Awards
• POPULAR MECHANICS's 2006 Editor's Choice
Award, from the SEMA and AAPEX shows in Las
Vegas.
•
Popular Mechanics automotive team checked out over
1,400 new products introduced at SEMA and AAPEX.
Performix Brand Liquid Tape Spray was one out of seventeen winners of their Popular Mechanics Editor's
Choice Awards.
•
The award was received in recognition of outstanding achievement in new product design and innovation.
• Electronics
• Cables
• Underground Wiring
• Landscape Lighting
• Gauges
• Outlet Boxes
• Circuit Boards
• Controls
• Sensors
• Junction Boxes
• Valves / Actuators
• Alarms / Sirens
• Distributors
• Junction Boxes
• Sleeves for LEDS
• Robot Electronics
• VLP
America's No. 1 Vinyl repair product
• VLP® is a clear, high strength, flexible adhesive, designed to mend rips, tears and small holes on most types of flexible vinyl surfaces.
• VLP® is supplied in an easy to use air dry formula that dries clear and blends with all coloured vinyl’s.
• VLP® actually dissolves the surface of the vinyl and creates an excellent bond when completely dry. On porous fabrics, VLP® can be used the same as on vinyl but actually penetrates the pores and creates an excellent mechanical bond.
• VLP® fuses the vinyl together to form a tough, waterproof repair that lasts for years. It will repair dishwasher racks, car seats, dashboards, pool toys, and camping gear.
Repair
Dishwasher
Racks
• Athletic Equipment
• Bowling Bags
• Golf Bags
• Covers
• Tent Floors
• Rainwear
• Curtains
• Vinyl Welting
• Luggage
• Garment Bags
• Plastiseam
No.1 in Waterproofing, sealing, restoring and repairing seams on all fabrics .
• PLASTISEAM® is a tough, clear, flexible resin system that is excellent for sealing out moisture in pinholes in sewn seams.
• PLASTISEAM® is second to none in performance and will last far longer than any other seam sealer on the market.
• PLASTISEAM® comes in a convenient roll-on applicator bottle and waterproofs stitching in cloth, canvas, vinyl, plastic etc. The applicator forces the transparent PLASTISEAM® into stitching joints and it dries clear, tough and waterproof.
• Ideal for hiking boots, tents, tarpaulin covers, annexes or anywhere a waterproof cover is required.
• Cushions
• Garment Bags
• Tarps
• Covers
• Liners
• Rainwear
• Tent fabrics
• Umbrellas
• Nylon
• Awnings
• Curtains
• Fly Covers
• Bags
• Safety Vest
-
• VYNA BOND is a transparent patch repair system, complete with clear patching material in the pack.
• VYNA BOND is a strong, flexible vinyl contact adhesive, can be brushed or spread, is fast drying and has excellent resistance to softening from plasticizer migration.
• VYNA BOND will repair swimming pool liners - even under water, ideal for camping and marine use.
Repairs
Swimming
Pools - Even
Underwater
• Inflatables
• Waterbed material
• Swimming pool liners and covers
• Cabanas
• Curtains
• Tarps
• Tank Covers
• Tank Liners
• Lifeboats
• Tent floors
• Rainwear
• Awnings
• HCF-
HCF Multi-Purpose Acrylic
Coating
• H CF is a flexible acrylic, water base coating.
Its very low V.O.C.s, non-flammable and high solids content make it an Emission Control
Coating System, ECCS®, that can be air-dried or heat cured to meet production demands.
• HCF can be sprayed*, dipped or brushed, is available in a wide variety of colours, and exhibits excellent petroleum, chemical, UV, corrosion and abrasion resistance. The safety of water base with the performance of solvent base coatings
• HCF impedes rust and can even be painted over rust.
•
Available Colours: RED. YELLOW,
ORANGE, BLUE, BLACK GREEN, GREY,
WHITE.
• Coils
• Transformers
• Tools
• Brackets
• Fixtures
• Oil handing equipment
• Weatherboard siding
• Steel
• Playground equipment
• Docks
• Heavy Machinery
• Chain link fences
• Wrought Iron components
• Concrete / Brick
• Plastic
Contact us craig@prime-electronics.com.au