Introduction SYSC5603 (ELG6163) Digital Signal Processing Microprocessors, Software and Applications Miodrag Bolic 1 Outline • Introduction to the course • Computer architectures for signal processing • Design cycle 2 Course Outline Hardware • DSP Systems, A/D and D/A converters • Architectural Analysis of a DSP Device, TMS320C6x, TigerSharc, Blackfin • FPGA for signal processing (Altera, Xilinx), • Application domain specific instruction set processors • SoC, DSP Multiprocessors • Signal processing arithmetic units Algorithm design and transformations • Scheduling, Resource Allocation, Synthesis • Finite-word length effects • Algorithmic transformations • FIR filter design • FFT design • IIR filter design • Adaptive filter design 3 Course Conduct • Course notes will be posted on the course web page • Assignments with solutions will be provided and will not be graded • There is no text-book • The exam will be prepared based on lecture slides, references and assignments 4 Paper Analysis and Presentation • Topics are related to the studied material • Each student will present for 15 minutes • Discussion will follow after the presentation • Each student has to choose one topic before January 16th at 7pm. • Each student have to send a document (from 8-10 pages) font 12 single spaced three days before the presentation. • The document has to be revised after my comments • 15 presentation slides max (10 minutes, 15min max) • The mark is 50% document, 50% presentation • Some preliminary time schedule is given on the course web page. This time schedule will be updated on January 16th • Your reports will be posted on the course Web page. Please see the paper on plagiarism: How to Handle Plagiarism: New Guidelines 5 Presentation topics- Computer architectures • Configurable processors for DSP applications – The analysis of processors with configurable instructions sets. Analysis of the tools. Include Tensilica, Altera and Coware solutions (Lisatek). An example of existing designs using configurable processors. • Multiprocessors for DSP – Analysis of papers including [Kumar05] and [Wiangtong05]. Analysis of current hardware solutions. Analysis of tools including CMPWARE. An example of existing designs using multi-processors. • IP core design. Current standards related to IP core design. Standard buses used for IP cores. Advantages and disadvantages of hard and soft IP cores. DSP processor cores. DSP hardware cores. 6 Presentation topics- Tools • Design space exploration tools – The analysis of the tools for design space exploration. Simulink based tools AccelChip vs. C-based tools (Coware). Performance and differences. • Direct mapping from algorithms to hardware – Analysis of different tools (Simulink, Synopsys System Studio, CoWare's SPW 5-XP) and design processes used for automated implementation of signal processing algorithms to FPGA. Analysis of quality and speed of these automated implementations. • Comparison between HandleC, SpecC and SystemC – What is the main difference of these languages. Which language should be taken for which application? Which of these languages have total support from algorithm design to the implementation (example Synopsys SystemC solution). • Tools for the analysis of the optimal-word length – Analyze the tools for floating to fixed point precision. Compare solutions from Mathworks, Synopsys and AccelChip. • TI standard for writing algorithms - eXpressDSP Algorithm 7 Presentation topics - Applications • Software-defined radio – Analysis of signal processing algorithms used for software defined radios. Computer architectures for software defined radios. List of commercial platforms and development tools. • Signal processing for wireless sensor networks – Analysis of signal processing algorithms used for wireless sensor networks: positioning, tracking, data fusion, sensor processing. Analysis of DSP architectures used in sensor networks. Specifics of algorithm designs for wireless sensor networks. • Tracking applications – Detailed analysis of different tracking and navigation application including: aircraft positioning, target tracking for radar and sonar applications, car collision detection, and positioning and tracking in homeland security applications. Define the requirements for each application such as sampling rate, accuracy, latency, range. Discuss about the algorithms and about the hardware platforms used for each applications 8 Project • • • • Project proposals are expected by February 6th. Deadline for project demonstration: March 31 Deadline for project report: March 27 Grade: 20% Project Proposal, 20% Project Report, 20% Project Presentation, 40% Demonstration • • You propose the algorithm and the application Two defined projects – Float-to-fixed point analysis and implementation of particle filters (Simulink or Synopsys System Studio) using FPGA – Comparison of different implementations of atan function using PDSP and FPGA platforms (VHDL) • Project platforms and tools: 1. Implementing signal processing algorithms using configurable processors with DSP blocks (Tensilica and NIOS II1) 2. The analysis of VLIW architectures and simulators for signal processing (Hardware design) 3. System level design using Simulink & Altera's DSP Builder1 4. System level design using SystemC under Synopsys System Studio 5. Multiprocessing using CMPWARE (Java, NIOS II) 9 1 – might be the license problem Project topics • Implementations of different algorithms on the same platform for the purpose of comparison of the algorithms Examples: – Implementation of multimedia signal processing algorithm in programmable dsp chips (TI TMS 32060) using the algorithm transformation techniques and compare to existing implementations. It is requried to discuss the VLIW instructure architecture and demonstrate how algorithm transformation/mappling techniques are being used to generate the code. – Comparison of different implementations of atan function using PDSP and FPGA platforms (VHDL). • Implementation of a DSP algorithm on new platforms. Examples: – Comparison of performance of Kalman filter implementations on configurable processors – Development of parallel Kalman filtering algorithm suitable for multiprocessor implementation. • Implementation of complex algorithms on FPGAs – It requires full implementation cycle from the implementation of these algorithms on Matlab/Simulink to their implementation. Mapping between the algorithms and the hardware have to be performed. Floating to fixed point analysis have to be performed 10 Project report Proposal: The purposes of writing a project proposals are: (i) to determine the topic, (ii) to show that preliminary study of the subject materials have been done, (iii) to assess the likelihood of success of the project, (iv) to give the plan to carry out the project. You should submit a three to five pages proposal to the instructor for approval of the project. A face to face discussion lasting 5-10 minutes between the instructor and the student is required. This discussion should take place during one of the office hours of the instructor. At the end of this discussion, the instructor will either approve the proposal and assign a grade, or reject the proposal and let the team know the reason. In the latter case, the team must come up with an revised proposal or an alternate new proposal before a deadline specified in the course outline. Preliminary discussion and the instructor can also be held in advance during their office hours. However, the opinion expressed by the teaching staff during these preliminary discussions are only suggestions. The team members are responsible to use their best judgement to prepare the proposal for approval. The format of the proposal is as follows: • title of the project • project highlight -- explain what you want to do in this project, • Motivation -- explain the significance of the proposed project and the relevance of the project to this course • Prior art -- listing at least three previous works (papers, books, etc.) that reported work most closely related to the current project. Briefly review their approaches, advantages and shortcomings. • Approach -- outline proposed approaches. Including preliminary analytical result, or implementation prototype as appropriate, a schedule of tasks to be performed, etc. • expected results -- what can be promised in the final project report that is not part of the proposal. • Task planning --specify when you will do what. Report: A type-written, hardcopy project report, as well as an electronic version (including source code, design files developed) are to be submitted at the end of the semester. The length of the report is not restricted. However, the report must be include the following sections: • Introduction: Motivation and backgrounds. • Main body of report. Depending on types of project, this part may include method used, approaches taken, problem description, etc. • Conclusion and discussion: Highlight your achievement in this project and things may be done in the future. More details about the project will follow Copied from http://homepages.cae.wisc.edu/~ece734/project/index.html 11 Course Objectives … To • Understand tradeoffs in implementing DSP algorithms • Know basic DSP architectures • Know some reduced complexity strategies for algorithms mainly on FPGA. • Know about commercial DSP solution • Know and understand system-level design tools • Understand research topics related to algorithmic modifications and algorithm-architecture matching 12 Why this course? There is the demand to derive more information per signal. “More” means • Faster: Derive more information per unit time; – Faster hardware – Newer algorithms with fewer operations • Cheaper: Derive information at a reduced cost in processor size, weight, power consumption, or dollars; • Better: Derive higher quality information, (higher precision, finer resolution, higher signal-to-noise ratio) [Richards04 ] 13 Hardware and software elements Progress in signal processing capability is the product of progress in IC devices, architectures, algorithms and mathematics. [Richards04 ] 14 Moore’s Law Predicts doubling of circuit density every 1.5 to 2 years. http://www.icknowledge.com/trends/uproc.html 15 What is Signal Processing? • Ways to manipulate signal in its original medium or an abstract representation. • Signal can be abstracted as functions of time or spatial coordinates. • Types of processing: – – – – – – – – – Transformation Filtering Detection Estimation Recognition and classification Coding (compression) Synthesis and reproduction Recording, archiving Analyzing, modeling Copied from [Hu04-Slides] Design and Implementation of Signal Processing Systems: An Introduction 16 Digital Signal Processing • Signals generated via physical phenomenon are analog in that – Their amplitudes are defined over the range of real/complex numbers – Their domains are continuous in time or space. • Digital signal processing concerns processing signals using digital computers. – A continuous time/space signal must be sampled to yield countable signal samples. – The real-(complex) valued samples must be quantized to fit into internal word length. Copied from [Hu04-Slides] Design and Implementation of Signal Processing Systems: An Introduction 17 Signal Processing Systems A/D Digital Signal Processing D/A The task of digital signal processing (DSP) is to process sampled signals (from A/D analog to digital converter), and provide its output to the D/A (digital to analog converter) to be transformed back to physical signals. Copied from [Hu04-Slides] Design and Implementation of Signal Processing Systems: An Introduction 18 Stratix DSP Development Board Nios Expansion Prototype Connector MAX 7000 Device Prototyping Area D/A Converters Mictor-Type Connectors for HP Logic Analyzers A/D Converters Analog SMA Connectors Texas Instruments Connectors on Underside of Board [AlteraDSP] 40-Pin Connectors for Analog Devices 19 Example DSP Applications…. COMMUNICATIONS Echo Cancellation PBXs Line Repeaters Modems Global Positioning Sound/Modem/Fax Cards Cellular Phones Speaker Phones Video Conferencing ATMs Digital VOICE/SPEECH Recognition Speech Processing/Vocoding Speech Enhancement Text-to-Speech Voice Mail AV Editing Mixers Home Theater Pro Audio Digital Detectors Tools Digital Audio / TV Music Synthesizers Toys / Games Answering Machines Digital Speakers Power DSP INSTRUMENTATION Analyzers Processors Digital Oscilloscopes Mass Spectrometers Seismic INDUSTRIAL/CONTROL Robotics Numeric Control Line Monitors Motor/Servo Control Power CONSUMER Radar Spectrum PRO-AUDIO Speech MEDICAL Patient Monitoring Ultrasound Equipment Diagnostic Tools Fetal Monitors Life Support Systems Image Enhancement MILITARY Secure Communications Processing Image Processing Radar Processing Navigation, Guidance Sonar 20 www.analog.com/dsp Implementation of DSP Systems • Platforms: – Native signal processing (NSP) with general purpose processors (GPP) • Multimedia extension (MMX) instructions – Programmable digital signal processors (PDSP) – Application-Specific Integrated Circuits (ASIC) – Field-programmable gate array (FPGA) • Requirements: – Real time • Processing must be done before a prespecified deadline. – Streamed numerical data • Sequential processing • Fast arithmetic processing – High throughput • Fast data input/output • Fast manipulation of data Copied from [Hu04-Slides] Design and Implementation of Signal Processing Systems: An Introduction 21 How Fast is Enough for DSP? • Real time requirements: – Example: data capture speed must match sampling rate. Otherwise, data will be lost. – Processing must be done by a specific deadline. • Different throughput rates for processing different signals – Throughput sampling rate. – CD music: 44.1 kHz – Speech: 8-22 kHz – Video (depends on frame rate, frame size, etc.) range from 100s kHz to MHz. Copied from [Hu04-Slides] Design and Implementation of Signal Processing Systems: An Introduction 22 ASIC: Application Specific ICs • Custom or semi-custom IC chip or chip sets developed for specific functions. • Suitable for high volume, low cost productions. • Example: MPEG codec, 3D graphic chip, etc. • ASIC becomes popular due to availability of IC foundry services. Fabless design houses turn innovative design into profitable chip sets using CAD tools. • Design automation is a key enabling technology to facilitate fast design cycle and shorter time to market delay. Copied from [Hu04-Slides] Design and Implementation of Signal Processing Systems: An Introduction 23 Programmable Digital Signal Processors (PDSPs) • Micro-processors designed for signal processing applications. • Special hardware support for: – Multiply-and-Accumulate (MAC) ops – Saturation arithmetic ops – Zero-overhead loop ops – Dedicated data I/O ports – Complex address calculation and memory access – Real time clock and other embedded processing supports. • PDSPs were developed to fill a market segment between GPP and ASIC: – GPP flexible, but slow – ASIC fast, but inflexible • As VLSI technology improves, role of PDSP changed over time. – Cost: design, sales, maintenance/upgrade – Performance Copied from [Hu04-Slides] Design and Implementation of Signal Processing Systems: An Introduction 24 [Seshan98] 25 PDSP Market – By Company 2002 Market Share 2001 Market Share 20% 24% Texas Instruments 40% Motorola Agere 8% 43% 9% Analog Devices Other 14% 16% 12% 14% Ref: Forward Concepts http://www.fwdconcepts.com/Pages/press42.htm 26 DSP Market – By Application Market Share - 2003 6% 4% 3% WIRELESS 8% CONSUMER MULTIPURPOSE 11% WIRELINE COMPUTER 68% AUTOMOTIVE Ref: Forward Concepts http://www.fwdconcepts.com/Pages/press42.htm 27 Computing using FPGA • FPGA (Field programmable gate array) is a derivative of PLD (programmable logic devices). • They are hardware configurable to behave differently for different configurations. • Slower than ASIC, but faster than PDSP. • Once configured, it behaves like an ASIC module. • Use of FPGA – Rapid prototyping: run fractional ASIC speed without fab delay. – Hardware accelerator: using the same hardware to realize different function modules to save hardware – Low quantity system deployment Copied from [Hu04-Slides] Design and Implementation of Signal Processing Systems: An Introduction 28 Stratix EP1S10 Altera Corp., Stratix Module 2: Logic Structure & MultiTrack Interconnect, 2004. 29 IP Cores • Processor cores Start-Core – 16-bit fixed-point VLIW DSP core from Lucent/Motorola (a company is established by Lucent for DSP section called “Agere”) – First VLIW machine to target low-power applications – Pipeline relatively simple – Targeting 198 mW @ 300 MHz, 1.5 V • Hardware cores Altera DSP coresDevice – – – – – – – Type FIR Compiler IIR Compiler FFT/IFFT Compiler NCO Compiler Reed-Solomon Compiler Constellation Mapper/Demapper Viterbi Compiler 30 SoC (System-on-Chip) • With the continuing scaling of modern IC devices, it is now possible to incorporate – Micro-processor cores + ASIC function blocks – Analog + digital components – Computation + communication functions – I/O, memory + processor into the same chip to form a comprehensive “system”. Thus, the notion of System-onchip (SoC) • Soc uses intellectual properties (IPs) that are predesigned modules. • Designing SoC thus becomes a task of system integration. • Challenge issues in SoC design: – Interface among IPs from different venders – Verification of function – Physical design challenges Copied from [Hu04-Slides] Design and Implementation of Signal Processing Systems: An Introduction 31 Design Issues • Given a DSP application, which implementation option should be chosen? • For a particular implementation option, how to achieve optimal design? Optimal in terms of what criteria? • Software design: – NSP, PDSP – Algorithms are implemented as programs. • Hardware design: – ASIC, FPGA – Algorithms are directly implemented in hardware modules. • S/H Co-design: System level design methodology. Copied from [Hu04-Slides] Design and Implementation of Signal Processing Systems: An Introduction 32 Design Process Model • Design is the process that links algorithm to implementation • Algorithm – Operations – Dependency between operations determines a partial ordering of execution – Can be specified as a dependence graph • Implementation – Assignment: Each operation can be realized with • One or more instructions (software) • One or more function modules (hardware) – Scheduling: Dependence relations and resource constraints leads to a schedule. Copied from [Hu04-Slides] Design and Implementation of Signal Processing Systems: An Introduction 33 A Design Example … Consider the algorithm: • Operations: – Multiplication – Addition n y a(k ) x(k ) k 1 • Dependency – y(k) depends on y(k-1) – Dependence Graph: Program: y(0) = 0 For k = 1 to n Do y(k) = y(k-1)+ a(k)*x(k) End y = y(n) a(1) x(1) a(2) x(2) y(0) a(n) x(n) * * * + + + Copied from [Hu04-Slides] Design and Implementation of Signal Processing Systems: An Introduction y(n) 34 Design Example cont’d … • Software Implementation: – Map each * op. to a MUL instruction, and each + op. to a ADD instruction. – Allocate memory space for {a(k)}, {x(k)}, and {y(k)} – Schedule the operation by sequentially execute y(1)=a(1)*x(1), y(2)=y(1) + a(2)*x(2), etc. – Note that each instruction is still to be implemented in hardware. • Hardware Implementation: – Map each * op. to a multiplier, and each + op. to an adder. – Interconnect them according to the dependence graph: a(1) x(1) a(2) x(2) y(0) a(n) x(n) * * * + + + Copied from [Hu04-Slides] Design and Implementation of Signal Processing Systems: An Introduction y(n) 35 Observations • Eventually, an implementation is realized with hardware. • However, by using the same hardware to realize different operations at different time (scheduling), we have a software program! • Bottom line – Hardware/ software co-design. There is a continuation between hardware and software implementation. • A design must explore both simultaneously to achieve best performance/cost tradeoff. Copied from [Hu04-Slides] Design and Implementation of Signal Processing Systems: An Introduction 36 A Theme • Matching hardware to algorithm – Hardware architecture must match the characteristics of the algorithm. – Example: ASIC architecture is designed to implement a specific algorithm, and hence can achieve superior performance. • Formulate algorithm to match hardware – Algorithm must be formulated so that they can best exploit the potential of architecture. – Example: GPP, PDSP architectures are fixed. One must formulate the algorithm properly to achieve best performance. Eg. To minimize number of operations. Copied from [Hu04-Slides] Design and Implementation of Signal Processing Systems: An Introduction 37 Algorithm Reformulation • Algorithmic level equivalence – Different filter structures implementing the same specification • Exploiting parallelism – Regular iterative algorithms and loop reformulation • Well studied in parallel compiler technology – Signal flow/Data flow representation • Suitable for specification of pipelining Copied from [Hu04-Slides] Design and Implementation of Signal Processing Systems: An Introduction 38 Mapping Algorithm to Architecture • Scheduling and Assignment Problem – Resources: hardware modules, and time slots – Demands: operations (algorithm), and throughput • Constrained optimization problem – Minimize resources (objective function) to meet demands (constraints) • For regular iterative algorithms and regular processor arrays -> algebraic mapping. Copied from [Hu04-Slides] Design and Implementation of Signal Processing Systems: An Introduction 39 Implementation process for PDSP [Wiangtong05] 40 Direct Mapping Techniques [Wiangtong05] 41 FIR Filters [DSPPrimer-Slides] 42 Transposed FIR Filter • Algorithm transform techniques: – Pipelining and parallelism, – retiming, – Unfolding-loop unrolling [DSPPrimer-Slides] 43 Example: One-to-one mapping and pipelining A B C D allocation A B C D assignment A B C D pipelining A B clocked flip-flop C Analyse timing • if OK then stop • else pipelining D ff clock [Meerbergen-Slides] 44 Coware SPW Design Flow www.coware.com 45 System-level design flow: Simulink-Altera [AlteraDSP] 46 Arithmetic • CORDIC – Compute elementary functions • Distributed arithmetic – ROM based implementation 47 Floating to fixed point analysis • Overflow of the number range • Large errors in the output signal occur when the available number range is exceeded— overflow. • Round-off errors • Rounding or truncation of products must be done in recursive loops so that the word length does not increase for each iteration. • Coefficient errors • Coefficients can only be represented with finite precision. • • • • Design for fixed-point arithmetic: Peak value estimation Word-length optimization Saturation arithmetic 48 References In order to prepare these slides, the following material is used: • Slides from [Hu04-Slides] “Design and Implementation of Signal Processing Systems: An Introduction” are copied with permission. • Slides from [DSPPrimer-Slides] and [Meerbergen-Slides] • [Richards04], [AlteraDSP], [Seshan98] • Details about these references can be found at: http://www.site.uottawa.ca/~mbolic/elg6163/References.htm 49