Horizon 2020 Energy Efficiency Information Day 12 December 2014 Heating and Cooling Topics EE13 and EE14 EASME Project Advisors: Antonio Aguiló-Rullán, Dana Dutianu Agenda 14:00 Overview support for heating and cooling in H2020 Agata Kotkowska, Head of Sector, EASME 14:10 EE13: Technology for DH and cooling Antonio Aguiló, Project Adviser, EASME 14:25 EE14: Removing market barriers to the uptake of efficient heating and cooling Antonio Aguiló, Project Adviser, EASME 14:45 Example of a market uptake project for heating and cooling Pedro Dias, Deputy Secretary General, ESTIF 14:55 Questions and answers 15:15 End Where is H/C in the H2020 energy challenge? Energy efficiency • Buildings, consumers, products • Industry – heat recovery (EE18) • Heating and Cooling (EE-13, EE-14) • Finance for sustainable energy (EE19-21) Smart Cities and Communities • Smart cities and communities solutions integrating energy, transport and ICT sectors – lighthouse projects (SCC-1) Low Carbon Energy • RES E and H/C technologies (LCE2, LC-3, LCE4) • Others • Others Info day and brokerage event: 12 Feb 2015 Actions supported in the H2020 Energy Challenge go from Research and Demonstration to Market Uptake Horizon 2020 Energy Efficiency Information Day 12 December 2014 Technology for district heating and cooling Topic EE13 Technology readiness levels (TRLs) Proposals are expected to be implemented at the specific TRLs RIA 1. Specific Challenge District heating and cooling systems need to be more efficient, intelligent and cheaper It is necessary to: • develop and deploy intelligent systems using smart metering and control solutions for: optimisation consumer empowerment exploiting multiple energy resources (waste heat recovery, HPs, thermal storage, cogeneration) renewable energy integration • roll-out solutions for the integration of smart thermal networks with smart electricity grids EE-13 Proposals should address 1 or more of the 4 areas included in the topic scope Scope (1/4) Develop, demonstrate and deploy a new generation of highly efficient, intelligent district heating and cooling systems that are capable of integrating multiple generation sources which can be operated at different temperature levels Systems can be new schemes or refurbished and optimised existing DH systems Systems should be compatible with and capable of integration with low energy buildings, including nearly zero energy buildings (e.g. using low temperature district heating) EE-13 Scope (2/4) Bring down heat distribution losses and integrate storage through: use of innovative pipe and storage design high performance insulation materials reduced operating temperatures efficiency system for fluid handling intelligent metering, control and grid optimisation strategies, including from analysing smart meter data, consumer interaction and behaviour EE-13 Scope (3/4) Develop optimisation, control metering, planning and modelling tools such as: Intelligent thermal agile controllers embedding self-learning algorithms which help to optimise the overall efficiency of technology hybrid systems; IT supervision systems capable of delivering real-time performance indicators, which are likely to modify consumption behaviours Scope (4/4) Develop new solutions for low temperature heat recovery and recirculation EE-13 Expected impacts Reduced energy consumption of space and water heating by 30 to 50% compared to today's level contribute to the wider use of intelligent district heating and cooling systems contribute to the integration of renewables, waste [heat] and storage Proposals should describe how they will contribute to the expected impact set out under Topic EE 13 in the work programme. Expected impact must be specific, and provide information that applies to the proposal and its objectives. Quantified indicators and targets are expected. EE-13 Lessons learnt (I) Consider carefully the template for the technical annex of proposals and the guidance included there Proposals should be focused and address the specific challenge "proposals should address one or more of the areas in the scope" Actors involved have included universities, research centres, industries, utilities, municipalities, building responsible/owners and SMEs EE-13 Lessons learnt (II) Be clear and exhaustive on the starting point of the action what has been already done how would the proposed action move things further demonstrate the innovation potential Measures to exploit the project results are generally overlooked and remember to pay attention to Intellectual Property Rights (IPR) Pay attention to the impacts to be achieved by projects Quantify the reduction of energy consumption and explain underlying assumptions Describe as necessary, i.e. contribution to the integration of waste heat and RES EE-13 Areas already supported under last year's Call* Development of advanced and intelligent control systems for smart and flexible DHC Introduction of thermal active demand response in the management of DHCS * Grant preparation ongoing EE-13 Example of projects Acronym Project name Duration Topic link e-HUB (FP7) Energy-Hub for residential and commercial districts and transport 2010/14 smart energy management system for capture, conversion, storage, distribution and control of energy, based on a maximum use of renewable energy resources. http://www.e-hub.org/, http://cordis.europa.eu/projec ts/rcn/97061_en.html FC DISTRICT (FP7) New µ-CHP network technologies for energy efficient and sustainable districts 2010/14 Optimise and implement heat management system that consider district networks and buildings http://fc-district.eu/, http://cordis.europa.eu/projec ts/rcn/96076_en.html Resilient (FP7) coupling REnewable, Storage and ICTs, for Low carbon Intelligent Energy maNagemenT at district level 2013/16 new integrated concept of interconnectivity between buildings, distributed energy resources and other networks at district level www.resilient-project.eu, http://cordis.europa.eu/projec ts/rcn/104392_en.html These are just examples of projects supported by the EC, nonexhaustive list. It does not include Call 2014 EE-13 projects currently under negotiation. Call Deadlines EE-13-2015 4th June 2015 Indicative Budget Indicative EU contribution per proposal: €1.5 – €2.0 million RIA, 100% funding EE-13 Horizon 2020 Energy Efficiency Information Day 12 December 2014 Removing market barriers to the uptake of efficient heating and cooling solutions Topic EE14 Policy context 2012: Energy Efficiency Directive (EED) Directive 2012/27/EU Promoting energy efficiency, including through efficient cogeneration and district H&C* (Art. 14). Member states shall: carry out a comprehensive assessment of the potential for the application of high-efficiency cogeneration and efficient district heating and cooling (notification to EC by Dec 2015) adopt policies encouraging the taking into account of the potential of using efficient H&C systems. Account shall be taken of the potential for developing local and regional heat markets. (here potential is identified), take adequate measures favouring efficient district H&C infrastructure and/or the development of high-efficiency cogeneration and the use of H&C from waste heat and renewable energy sources * Systems using at least 50% renewable energy can be qualified as efficient district H&C (Art. 2) EE-14 Policy context 2010: Energy Performance of Buildings Directive (EPBD recast) Directive 2010/31/EU Inspection of heating systems (art 14) and of air-conditioning systems (art 15) – MS should shall lay down the necessary measures to: establish regular inspection of the accessible parts of systems used for space heating (>20 kW) and for air conditioning (>12 kW) the building including assessment of boiler efficiency and the boiler sizing compared with the heating requirements of the building frequency of such inspections can be reduced, as appropriate, where an electronic monitoring and control system is in place EE-14 Policy context 2010: Energy labelling directive (recast) 2010/30/EU from Sep 2015 suppliers putting certain heating and cooling systems on the market should ensure that: Space and water heaters an energy label is attached, a product fiche is provided promotion material includes a reference to the seasonal space heating energy efficiency class minimum requirements regarding the efficiency of the products will also apply from Sep 2015, http://ec.europa.eu/energy/efficiency/labelling/labelling_en.htm commission delegated regulations No811/2013 and No812/2013. http://eur-lex.europa.eu/legal-content/EN/ALL/?uri=OJ:L:2013:239:TOC guidelines on space and water heaters are being produced, in order to help with the implementation of the Regulations. Available on DG ENER Website by January 2015. Measures on other heating products (biomass boilers and local space heaters) have been approved by the Ecodesign Committee, publication expected in 2015. EE-14 EE-14 Technology readiness levels (TRLs) Market uptake action accelerating the market uptake of technologies available in the market converting policy into action CSA 1. Specific challenge Actions aiming at removing non-technological (including legislation) barriers to exploit the full potential of efficient heating and cooling solutions It involves: integrated planning and integration of heating/cooling into the territorial context; active participation of local administrations; adaptation and compatibility/connectivity with low energy building standards; inclusion of heating/cooling in building renovation strategies empowerment and involvement of consumers through innovative metering, billing and complaint handling processes. EE-14 Scope (1/6) Individual H/C: Innovative measures to accelerate the replacement of old, inefficient H/C systems with products having A +++ to A+ energy labels -> support energy labelling / eco-design directives affecting heating and cooling products Scope (2/6) Support inspection of H/C systems as required in EBPD: including actions using ICT to reduce the need for physical inspections actions can also support the provision of advice to the user as well as monitor the results of advice support to implementation of inspection in H/C systems as in Articles 14/15 of the EPDB EE-14 Scope (3/6) For industrial heating and cooling: deploy effective heating/cooling in industry that integrate demand and supply deploy RES H/C solutions in relevant industry sector (e.g. food and drink industries) contribute to identifying, developing, and promoting new markets for the recovery of heat from industry buy putting stakeholders together, including activities aiming at supporting public acceptance of waste heat recovery exchange of information and knowledge Proposals should engage all relevant stakeholders (demand and supply side) EE-14 EE-14 Scope (4/6) Energy supply systems* lead to opening up of new markets for the most efficient large, medium or small scale systems should build on best practice examples. * high efficiency co-generation (large, small and micro) and efficient district heating and cooling, which may use waste heat or renewable energy sources. Proposal should lead to specific impacts Involve relevant stakeholders (e.g. target groups, decision makers, etc.) Changing in the market conditions and opening new markets * See definition in work programme Scope (5/6) For district heating and cooling industry: develop good practice, licensing criteria, efficiency benchmarks and consumer protection codes to improve the transparency of the market and increase consumer trust. ensure exchange of information, knowledge of using best practice examples and knowledge of consumer practices, motivations and barriers. Involve the relevant target groups Actions should lead to implementation of results and have an impact in the market EE-14 Scope (6/6) Heating and cooling planning - develop and demonstrate: the tools and methodologies required to conduct the procedures necessary at the member state and EU level such as energy system analysis using CHP and energy storage, geographical information systems (GIS) for matching heat supply and demand measures to overcome implementation challenges Support Art 14 of the EED Actions should make it possible for local communities and MS to develop strategies for the achievement of the overall EU targets Actions should go beyond tool development and involve/engage with the target groups and end users leading to market roll-out EE-14 EE-14 EXPECTED IMPACT More favourable market conditions for efficient heating and cooling solutions and opening up of new markets Every million Euro of EU support should in the short term lead to the reduction of at least 25 GWh/yr of fossil fuels for heating and cooling. Significant impacts should also be measured in terms of: • • • • investment made by stakeholders in sustainable energy number of policy makers influenced number of people with increased skills or number of people changing their behaviour Impacts should be described, quantified and related to the proposed activities EE-14 Lessons learnt Some proposals tried to cover too many areas and as result they were too vague proposals need to be focused Consortia should include or engage with the relevant market actors and stakeholders as appropriate, e.g. industry (equipment and fuel suppliers), installers, real estate developers, public authorities, energy services companies, designers and end user groups / consumer associations. Proposals should respond to a real need problem, action design, stakeholders involved, required activities impacts Projects should seek the adoption/initiation/implementation of the proposed approaches during the project duration decision makers need to be involved Sustainability of the proposed action Technical studies / technological development might be required HOWEVER these should be essential for the realisation of the action bearing in mind the impacts of CSA/market uptake actions LCE-4 Market uptake of RES H/C is supported under LCE4 Challenge Support to the MS to achieve the EU targets for renewable energy Scope includes the following Public acceptance of RES projects Ensuring speedy and user friendly permitting procedures Implementation of RE policies, codes and legislation - EU national, regional and local levels Facilitate informed decisions - capacity building Promotion of geothermal, bio and/or solar in individual, industrial and district heating applications Involve the market actors and stakeholder that are necessary to achieve the adoption of best practices Call deadline: 5th May 2015 More info: http://goo.gl/xXlbq Example of market uptake projects supported by the IEE programme Call year Project acronym EE-14,LCE-4 Title Start date 2010 URBANSOLPLUS Solar Thermal in Major Renovations and Protected Urban Areas June 2011 2010 ISERV Inspection of HVAC systems through continuous monitoring and benchmarking April 2011 2011 BIOGASHEAT Development of sustainable heat markets for biogas plants in Europe April 2012 2011 CODE Cogeneration Observatory and Dissemination Europe 2 July 2012 2011 GEODH Promote Geothermal District Heating Systems in Europe April 2012 2011 RESCUE Renewable Smart Cooling for Urban Europe June 2012 2011 REGEOCITIES Regulations of geothermal heat pumps systems at local and regional level in Europe May 2012 2011 2013 2013 2013 SDHPLUs SmartReflex RES H/C Spread STRATEGO New Business Opportunities for Solar District H/C Smart and Flexible 100 % RES DHC in Eu cities RES H/C - Strategic Actions Development Multi-level actions for enhanced H/C plans July 2012 March 2014 March 2014 April 2014 2013 FRONT Fair RHC Options & Trade April 2014 These are just examples of projects supported by the EC, nonexhaustive list. It does not include Call 2014 EE-14 projects currently under negotiation. Project database: http://goo.gl/5YGpDb Supplementary information Past and on-going IEE supported projects on heating and cooling. IEE project database: https://ec.europa.eu/energy/intelligent/projects/ Summary of ongoing IEE projects on heating and cooling projects http://managenergy.net/lib/documents/1287/original_Sum mary_of_IEE_ongoing_H-C_projects_Nov_2014.pdf European Commission energy references: Energy efficiency, http://ec.europa.eu/energy/efficiency/ Renewables, http://ec.europa.eu/energy/renewables Buildings http://ec.europa.eu/energy/efficiency/buildings/buildings_e n.htm Energy labelling http://ec.europa.eu/energy/efficiency/labelling/labelling_en .htm EE-14 Call Deadlines EE-14-2015 4th June 2015 Indicative Budget Indicative EU contribution per proposal: €1.5 – €2.0 million CSA, 100% funding Other topics of interest for H/C Market uptake of exiting and emerging RES H/C, LCE-4 Enhancing the capacity of public authorities to plan and implement sustainable energy policies including planning for heating and cooling EE7 Project development assistance for innovative bankable sustainable energy investment schemes and projects including DHC are supported in H2020, EE-20 Support for demonstration for RES H/C technologies is provided in LCE-3 District energy systems are mentioned in the Call for Smart Cities and Communities, SCC-1 R&D for the use of heat recovery in large industrial systems EE18 More info: http://goo.gl/hEUvXx Thank you very much for your attention For more information: EASME-Energy@ec.europa.eu Horizon 2020 documents: http://ec.europa.eu/research/horizon2020/index_e n.cfm?pg=h2020-documents Any Questions?