DIGI SM-120 SETUP NOTES
GOALS:
UPDATE THE EPROM
LOAD @LABEL
SET FLAGS
SET IP ADDRESS
CREATING PLU’S AND LABEL FORMAT
USING PYROBATCH TO BACK UP
SETTING/UPDATING THE EPROM ON A SM-120
HOLD PRESET KEY 22 (OR THE LETTER L)
HOLD REZERO THEN PRESS THE ON BUTTON
OPTION ETHERNET OR RS232C APPEARS ON THE SCALE SCREEN
PRESS 1 TO SELECT ETHERNET
THIS SETS THE IP ADDRESS TO 10.10.10.1
NOW ON THE LAPTOP TURN OFF THE WIFI
OPEN NETWORK AND SHARING CENTRE
CHANGE ADAPTER SETTINGS BY RIGHT CLICKING ON ‘ETHERNET’
THEN ‘PROPERTIES’
HIGHLIGHT THE TCPIP4 OPTION AT THE BOTTOM
THEN CLICK ‘PROPERTIES’
CHANGE THE IP ADDRESS TO 10.10.10.20
AND ALSO THE SUBNET MASK TO 255.255.255.0
CLICK OK AND CLOSE
NOW TO FIND THE FILES TO UPDATE THE EPROM (TO VERSION 1.0.5)
ON THE DESIGNATED LAPTOP THEY CAN BE FOUND IN THE TOP RIGHT CORNER IN THE FOLDER
CALLED ‘NEW EPROM FILES (4)
NOW RUN THE MINI PROGRAMMER V5, ALSO LOCATED ON THE RIGHT SIDE OF THE DESKTOP
(TO SETUP CLICK SETUP FILE, CLICK ON COMP IMAGE, CLICK MINI PROGRAMMER FROM THE LIST
AND SAY YES TO ALL OF THE OPTIONS)
OPEN THE MINI PROGRAMMER
SELECT SM-120
CLICK FILE
LOAD FILE TO THE PROGRAM BUFFER
POINT THE FILES AT (*BIN)
SELECT NO.1
CLICK FLASH > PROGRAM > RUN
IT SHOULD SAY ON THE SCALE ‘SCALE UPGRADE IS OK’
CLICK FILE > THEN ‘CLEAR BUFFER’
NOW POINT FILES AT (*TXB) FILES
SELECT NO.2
TURN THE SCALE OFF AND ON AGAIN
NOW ON THE SCALE PRESS AND HOLD REZERO AND THE PRESS KEY 22 (OR THE LETTER ‘L’) AS YOU
TURN IT BACK ON
SELECT ETHERNET
NOW TO SEND THE NEXT ONE DOWN
PRESS FILE > CLEAR BUFFER
NEXT LOAD IN THE (*BAP) FILE (3)
TURN THE SCALE OFF AND ON AGAIN
NOW ON THE SCALE PRESS AND HOLD REZERO AND THE PRESS KEY 22 (OR THE LETTER ‘L’) AS YOU
TURN IT BACK ON
SELECT ETHERNET
NOW TO SEND THE NEXT ONE DOWN
FLASH > PROGRAM > RUN
FINALLY LOAD THE (*HEY) FILE (4)
FAST MODE IS OK
FLASH > PROGRAM > RUN
TURN SCALE OFF THEN BACK ON
IT SHOULD NOW SAY THE NEWEST VERSION ON THE SCREEN (v.1.0.5)
LOADING @LABEL
THE LATEST VERSION IS V.27.1.1]
RIGHT CLICK ON THE PROGRAM
RUN AS ADMINISTRATOR
INSTALL
FINISH
THE NEXT STEP IS TO SET THE IP ADDRESS ON THE SCALE (AND A COUPLE OF FLAGS)
GO TO ‘Z’ MODE
HOLD REZERO KEY AND TYPE 141
AT THIS POINT YOU SHOULD SEE SPOOO
TO START TYPE 49 X 2
PRESS PRINT KEY
TYPE 50 X 1
PRESS PRINT KEY
TYPE 135 X 11 (OR WHATEVER THE LAST DIGITS ARE OF THE IP ADDRESS YOU HAVE SET)
NOW PRESS PLU (THIS SAVES YOUR CHANGES)
TURN SCALE ON AND OFF AGAIN
TOGGLE BACK THROUGH TO Z MODE
TYPE REZERO 0416
TYPE 192.168.001 – YOU HAVE ALREADY SET THE FINAL DIGITS IN THE PREVIOUS STEP (011)
PRESS PLU BUTTON (THIS SAVES IT)
TURN OFF SCALE & TURN ON AGAIN
GO TO Z MODE AND CHECK THAT THE FULL IP ADDRESS HAS BEEN SET CORRECTLY BY TYPING
REZERO 0416 AND CHECK THAT IT SAYS 192.168.001.011
NOW BACK TO THE COMPUTER
CONFIRM THAT THE WIFI IS OFF
OPEN NETWORK AND SHARING CENTRE
CLICK ON ETHERNET
SELECT TCPIP 4
PROERTIES
SET IP TO 192.168.001.015 (MAKE SURE THE FINAL THREE DIGITS ARE DIFFERENT TO WHAT YOU
HAVE SET ON THE SCALE)
CLOSE ALL PROGRAMS
NOW DO A PING TEST
SEARCH FOR ‘CMD’ IN WINDOWS
ON THE BLACK DOS SCREEN TYPE ‘PING 192.168.1.11 (IT IS IMPORTANT TO NOTE THAT HERE YOU
HAVE TO REMOVE ANY ZEROS OR IT WILL NOT WORK)
IT THE COMPUTER IS SUCCESSFULLY TALKING WITH THE SCALE THEN IT SHOULD SAY ‘REPLY ETC...’
FOR THE NEXT TEST TYPE ‘FTP 192.168.1.11’
IT SHOULD RESPOND BY SAYING ‘CONNECTED. WELCOME TO SM120’
PRESS ENTER
THEN TYPE ‘BY’ AND CLOSE THE WINDOW
USE PYROBATCH TO BACKUP/SEND DOWN FILES
INSTALL PYROBATCH
RIGHT CLICK ON THE PROGRAM AND CLICK ‘RUN AS ADMINISTRATOR’
INSTALL FOR THE FIRST TIME
CLICK NEXT
CLICK ACCEPT
DROP THE ‘UPLOAD’ FOLDER ONTO THE C:
COPY THE ‘SCRIPTS’ FOLDER INTO DOCUMENTS AND REPLACE WHATEVER IS IN THERE (IF
ANYTHING)
NOW OPEN PYROBATCH
CLICK EDIT > THEN OTHER > THEN ‘START WITH DOWNLOADS’
CHANGE THE IP ADDRESS TO THE SCALE (IN THIS CASE IT’S 192.168.1.11)
CLICK FILE > SAVE
DO THE SAME WITH UPLOADS
CLICK FILE > SAVE
CLICK ‘EXECUTE’ DROP DOWN MENU
THEN CLICK DOWNLOAD (THIS SENDS FILES DOWN TO THE SCALE / THE WHOLE PROGRAM)
*EVEN THOUGH THE PREVIOUS STEP IS CALLED DOWNLOAD YOU ARE UPLOADING THE
INFORMATION TO THE SCALE
ON THE SCALE NO GO TO Z MODE AND PRESS REZERO 1439
THEN PRESS PRINT
RUNNING @LABEL
CLICK ON THE @LABEL LINK
SELECT YOUR COUNTRY > UK > SUBMIT
LOGIN WITH USERNAME (ADMIN) AND PASSWORD (TERAOKA)
IN @LABEL CLICK ON ‘SCALE’
CLICK ON ‘SCALE LIST’
CLICK ON ‘CREATE’ AT THE BOTTOM
SCALE CODE = 123
SCALE IP = 192.168.1.11 (THE FINAL DIGITS YOU HAVE SET PREVIOUSLY)
SCALE TYPE = SM120
SCALE STATUS = WORK NORMAL
RELATED GROUP = 997 DEFAULT
IF WORKED CORRECTLY THEN A MESSAGE SHOULD APPEAR SAYING ‘CREATE SUCCESS’
COPY BACKUP FILE ‘jdstore_20150508’
C: > JDIGIDTORE > DBBACKUP > PASTE IT IN HERE
TOOLS > DATABASE
CLICK ON THE FILE THAT YOU HAVE JUST DROPPED IN
CLICK RESTORE
THE PROGRAM WILL NOW SAY PROCESSING, LOOK AT YOUR WATCH AND RESTART THE COMPUTER
AFTER ROUGHLY 5 MINS
GO INTO SCALE LIST
EDIT SCALE IP ADDRESS TO WHAT YOU SET IT TO + DELETE THE SERIAL NUMBER
NOW CLICK RESTART
SETTING UP A PLU
CLICK PLU LIST > THEN CREATE
TYPE IN NAME AND PRICE
OVERRIDE – NO
MAINGROUP – 997
UNIT TYPE – WEIGHT OR NON
TAX – IGNORE
1ST LINE – ADD PLU NAME
CHARACTER – M3 (THIS SIZE IS USUALLY ABOUT RIGHT)
BARCODE (IF NEEDED)
EAN
SELECT BARCODE FORMAT: FF CCCC XCD XXXXX CD (13)
ITEM CODE – 1
BARCODE FORMAT FLAG 1 – 0
BARCODE FORMAT FLAG 2 – 2
BARCODE FORMAT X SPEC – TOTAL PRICE
STILL ON THAT PLU, CLICK LABEL AT THE BOTTOM
SCROLL THROUGH THE LIST TO THE BOTTOM AND SET LABEL FORMAT 1 AS ‘F1 CUSTOM’
CLICK ON ‘SEND’
INGREDIENTS
SELECT YOUR PLU
CHARACTER M1 < THIS IS A GOOD SIZE FOR THE INGREDIENTS
SPECIAL MESSAGE < ENTER IF NEEDED
FLEXIBLE NUTRITION < ENTER DATA + ADD A SECOND LABEL FORMAT IF NEEDED
EDIT DISCOUNT