SHOT
A mobile Charger on your Bike
SHOT
A mobile Charger on your Bike
The SHOT is specially designed, developed, manufactured
to serve the needs of the bikers. Today’s world is full of
emerging technologies and converging into a complete
smart world. By using smart phones we are trying to be
connected to the smart network, but always it has
become a challenge to keep the phone alive by
continuous charging. Especially for the bikers who travel for
longer time, it is much necessary to keep their mobile
charging. This product is mainly designed for the following
group of people, who travel s a lot in a day i.e marketing ,
collection executives, field working employees, college
students etc.
To be replaced with Pink
SHOT is a powerful USB charger which can be mounted on
the handle of the Bikes or on a surface of front panel (near
ignition) for the ladies bikes. The installation is so simple and
can be completed along with connections within few
Minutes by a mechanic. Installation instructions provided in
the packing of the product will guide how to install the SHOT
quickly in simple ways and how to use it.
SHOT
A mobile Charger on your Bike
The SHOT is carefully designed to suit the outdoor requirements.
The handle clamp and the hardware make the SHOT suitable
to mount on the handles. The bolts (3 x 25mm) and special
bush type nut provide security and safety from theft.
The snap fit provided under the SHOT will not allow removal
the product once it is installed.
The additional cap on the product on front side, covers USB
from dust during the normal times and from water splashes
during the rain and water washes of the bike.
The handle clamp is designed in such a way that the SHOT
can be turned in any angle chosen by the user. But it is
recommended to face the USB port towards the ground to
avoid the dust accumulation and water penetration when bike
is subjected to splashes of water for long durations.
An LED indication provides the user that the SHOT is now available to
charge the gadget.
The cables provided will facilitate to install the SHOT as per the user
demand. However it is recommended to install on the handle of the bike or
front panel of the ladies bikes so that the USB charging cable (Not supplied
along with the SHOT) length is sufficient enough to connect from SHOT to the
Mobile.
The strong body specially molded provides enough mechanical strength to
protect the device from any kind of external impacts.
The voltage regulator in the SHOT controls the variations in the voltage and
provides constant and safe voltage to the device
The protection against the short circuit provides an extra protection to the
device and user. However it is strongly recommended not to use mobile
phone directly while it is under charging.
SHOT
A mobile Charger on your Bike
Reverse input protection provides safety to the SHOT when
users mistakenly connects the SHOT in reverse polarity.
Color coded input wires make installation and connections
much simpler.
1000mA capacity facilitates the fast charging.
Strong packing provides safeguards the SHOT till it reaches
the end user.
CE, ROHS and STQC certification make the SHOT unique,
strong, standard and sturdy to meet the requirement of the
end user.
Product Specifications :
Input voltage
: 12V DC +/- 10%
Output Voltage
: 5V DC +/- 5%
Current
: 1000mA
Suitable devices
: All mobiles, tablets, notes and
pods
Dimensions
: 50 x 50 x 20 mm
No of USB ports
: One
Input cable
: 2C x 0.2 Sqmm
Input Cable length
: 0.8 mtr
Mounting location
: Handle / front panel ( as
indicated in installation instructions)
Contact us @
+9198465512336
+9156556666663
sales@magspearl.com
Certification
: CE, ROHS and STQC tested
Rain proof
: Yes
Outdoor application
: Yes
MagsPearl Power & Control Technologies Pvt limited.
211, Manasa nest, Opp: Xavier School, MJ Colony,
Moula-ali, Hyderabad – 500040, Telangana, India.
Ph:+91-40045071 +91-9849955338, +91-9618070298
email: gmr@magspearl.com,
www.magspearl.com