WCDMA RAN, Rel. WCDMA
16, Operating Documentation,
Issue 06
Nokia Base Station Optional
Items Description
DN09142347
Issue 07
Approval Date 2017-01-27
Nokia Base Station Optional Items Description
The information in this document applies solely to the hardware/software product (“Product”) specified
herein, and only as specified herein. Reference to “Nokia” later in this document shall mean the respective
company within Nokia Group of Companies with whom you have entered into the Agreement (as defined
below).
This document is intended for use by Nokia's customers (“You”) only, and it may not be used except for the
purposes defined in the agreement between You and Nokia (“Agreement”) under which this document is
distributed. No part of this document may be used, copied, reproduced, modified or transmitted in any form
or means without the prior written permission of Nokia. If You have not entered into an Agreement
applicable to the Product, or if that Agreement has expired or has been terminated, You may not use this
document in any manner and You are obliged to return it to Nokia and destroy or delete any copies thereof.
The document has been prepared to be used by professional and properly trained personnel, and You
assume full responsibility when using it. Nokia welcomes your comments as part of the process of
continuous development and improvement of the documentation.
This document and its contents are provided as a convenience to You. Any information or statements
concerning the suitability, capacity, fitness for purpose or performance of the Product are given solely on
an “as is” and “as available” basis in this document, and Nokia reserves the right to change any such
information and statements without notice. Nokia has made all reasonable efforts to ensure that the
content of this document is adequate and free of material errors and omissions, and Nokia will correct
errors that You identify in this document. Nokia's total liability for any errors in the document is strictly
limited to the correction of such error(s). Nokia does not warrant that the use of the software in the Product
will be uninterrupted or error-free.
NO WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO
ANY WARRANTY OF AVAILABILITY, ACCURACY, RELIABILITY, TITLE, NON-INFRINGEMENT,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE IN RELATION TO THE
CONTENT OF THIS DOCUMENT. IN NO EVENT WILL NOKIA BE LIABLE FOR ANY DAMAGES,
INCLUDING BUT NOT LIMITED TO SPECIAL, DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL
OR ANY LOSSES, SUCH AS BUT NOT LIMITED TO LOSS OF PROFIT, REVENUE, BUSINESS
INTERRUPTION, BUSINESS OPPORTUNITY OR DATA THAT MAY ARISE FROM THE USE OF THIS
DOCUMENT OR THE INFORMATION IN IT, EVEN IN THE CASE OF ERRORS IN OR OMISSIONS
FROM THIS DOCUMENT OR ITS CONTENT.
This document is Nokia proprietary and confidential information, which may not be distributed or disclosed
to any third parties without the prior written consent of Nokia.
Nokia is a registered trademark of Nokia Corporation. Other product names mentioned in this document
may be trademarks of their respective owners.
Copyright © 2017 Nokia. All rights reserved.
f
Important Notice on Product Safety
This product may present safety risks due to laser, electricity, heat, and other sources of danger.
Only trained and qualified personnel may install, operate, maintain or otherwise handle this
product and only after having carefully read the safety information applicable to this product.
The safety information is provided in the Safety Information section in the “Legal, Safety and
Environmental Information” part of this document or documentation set.
Nokia is continually striving to reduce the adverse environmental effects of its products and services. We
would like to encourage you as our customers and users to join us in working towards a cleaner, safer
environment. Please recycle product packaging and follow the recommendations for power use and proper
disposal of our products and their components.
If you should have questions regarding our Environmental Policy or any of the environmental services we
offer, please contact us at Nokia for any additional information.
2
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table of Contents
This document has 203 pages
Summary of changes................................................................... 17
1
RSS-310 compliance................................................................... 20
2
EU RoHS statement.....................................................................21
3
CE marking.................................................................................. 22
4
FCC Part 15 compliance.............................................................. 23
5
Flexi Fiber OD LC-LC Adapter (FSGD) description..................... 24
6
Flexi Release 4 Book Mount Kit (FMFB/FMFH) description........ 26
7
7.1
Flexi Mounting Kit for Floor, Wall and Pole (FMFA) description... 28
Flexi Mounting Kit for Floor, Wall and Pole (FMFA) dimensions
and weight....................................................................................29
8
8.1
Flexi Pole Kit (FPKA) description................................................. 31
Flexi Pole Kit (FPKA) dimensions and weight..............................33
9
9.1
Flexi Pole Kit (FPKC) description.................................................34
Flexi Pole Kit (FPKC) dimensions and weight..............................40
10
Flexi Pole Installation Kit (FPIA) description................................ 41
11
Flexi Mounting Auxiliary Bracket (FMAA) description.................. 42
12
Flexi Mounting Covers for Back and Front (FMCA/FMCH/FMCB)
description....................................................................................43
Flexi Mounting Covers for Back and Front 3U (FMCA) dimensions
..................................................................................................... 44
Flexi 3U High Covers Mounting Covers Front/back (FMCH)
dimensions................................................................................... 44
Flexi Mounting Covers for Back and Front 2U (FMCB) dimensions
..................................................................................................... 44
12.1
12.2
12.3
13
13.1
13.2
13.3
14
14.1
DN09142347 Issue: 07
Flexi Module Casing (EMHA/EMHH/EMTA) description.............. 46
Flexi Module Casing (EMHA) dimensions and weight................. 50
Flexi 3U Casing and High Covers F&B (EMHH) dimensions and
weight...........................................................................................50
Flexi Module Casing (EMTA) for 2 height units (2U) dimensions
and weight....................................................................................50
Flexi 3U Face Down Casing Pole & Wall (EMHD) description.....52
Flexi 3U Face Down Casing Pole & Wall (EMHD) dimensions and
weight...........................................................................................53
© 2017 Nokia
3
Nokia Base Station Optional Items Description
15
15.1
15.2
15.3
15.4
16
16.1
16.2
16.3
16.4
Slotpack AC/ DC power solution for FCOB..................................62
Slotpack AC/DC power solution for FCOB operation...................62
Slotpack AC/DC power solution for FCOB dimensions and weight.
62
Slotpack AC/DC power solution for FCOB interfaces.................. 63
Slotpack AC/DC power solution for FCOB LED indications.........64
17
17.1
17.2
17.3
17.4
Flexi Power DC/DC Module (FPDA) description..........................66
Flexi Power DC/DC Module (FPDA) operation............................ 66
Flexi Power DC/DC Module (FPDA) dimensions and weight.......67
Flexi Power DC/DC Module (FPDA) interfaces............................67
Flexi Power DC/DC Module (FPDA) LED indications.................. 68
18
18.1
18.2
18.3
Flexi Power Rectifier (FPRB) description.....................................69
Flexi Power Rectifier (FPRB) operation....................................... 69
Flexi Power Rectifier (FPRB) dimensions and weight..................70
Flexi Power Rectifier (FPRB) LED indications............................. 70
19
19.1
19.2
19.3
19.4
Flexi Power Battery (FPBC) description.......................................72
Flexi Power Battery (FPBC) operation......................................... 72
Flexi Power Battery (FPBC) dimensions and weight................... 73
Flexi Power Battery (FPBC) interfaces........................................ 73
Flexi Power Battery (FPBC) LED indications............................... 74
20
20.1
20.2
Flexi Power AC/DC Submodule 230 V (FPAD) description..........75
Flexi Power AC/DC Submodule 230 V (FPAD) operation............ 75
Flexi Power AC/DC Submodule 230 V (FPAD) dimensions and
weight...........................................................................................76
Flexi Power AC/DC Submodule 230V (FPAD) interfaces............ 76
Flexi Power AC/DC Submodule 230 V (FPAD) LED indications......
77
20.3
20.4
21
21.1
21.2
21.3
21.4
22
4
Flexi Power Module (FPMA) and submodules (FPAA and FPBB)
description....................................................................................54
Flexi Power Module (FPMA) and submodules (FPAA and FPBB)
operation...................................................................................... 54
Flexi Power Module (FPMA) dimensions and weight...................57
Flexi Power Module (FPMA) and submodule (FPAA and FPBB)
interfaces......................................................................................58
Flexi Power Submodule (FPAA and FPBB) LED indications....... 60
Flexi Power AC/DC Submodule 230 V (FPAE) description..........78
Flexi Power AC/DC Submodule 230 V (FPAE) operation............ 78
Flexi Power AC/DC Submodule 230 V (FPAE) dimensions and
weight...........................................................................................79
Flexi Power AC/DC Submodule 230 V (FPAE) interfaces............80
Flexi Power AC/DC Submodule 230 V (FPAE) LED indications......
80
Overview of Flexi Power Distribution Units.................................. 82
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
22.1
22.1.1
22.1.2
22.2
22.3.3
22.3.4
22.4
22.4.1
22.4.2
Flexi Power Distribution and Fuses (FPFB) description...............82
Flexi Power Distribution and Fuses (FPFB) operation................. 83
Flexi Power Distribution and Fuses (FPFB) dimensions..............83
Flexi Power Distribution and Fuses Outdoor (FPFC) description....
84
Flexi Power Distribution and Fuses Outdoor (FPFC) operation...84
Flexi Power Distribution and Fuses Outdoor (FPFC) dimensions
and weight....................................................................................86
Flexi Power Distribution and Fuses Outdoor (FPFC) LED
indications.................................................................................... 87
Flexi Power Distribution Submodule (FPFD) description............. 87
Flexi Power Distribution Submodule (FPFD) operation............... 88
Flexi Power Distribution Submodule (FPFD) dimensions and
weight...........................................................................................88
Flexi Power Distribution Sub-Module (FPFD) interfaces..............89
Flexi Power Distribution Submodule (FPFD) LED indications..... 90
Flexi Power Distribution and Fuses Indoor (FPFI) description.....91
Flexi Power Distribution and Fuses Indoor (FPFI) operation....... 91
Flexi Power Distribution and Fuses Indoor (FPFI) dimensions.... 92
23
23.1
23.2
23.3
Flexi System External OVP (FSES) description...........................93
Flexi System External OVP (FSES) operation............................. 93
Flexi System External OVP (FSES) dimensions and weight....... 94
Flexi System External OVP (FSES) interfaces............................ 94
24
24.1
24.2
24.3
Flexi System External OVP (FSEP) description...........................96
Flexi System External OVP (FSEP) operation............................. 96
Flexi System External OVP (FSEP) dimensions and weight....... 97
Flexi System External OVP (FSEP) interfaces............................ 97
25
25.1
25.2
Flexi Fiber Optical Distribution Unit (FODA) description.............. 99
Flexi Fiber Optical Distribution Unit (FODA) operation................ 99
Flexi Fiber Optical Distribution Unit (FODA) dimensions............. 99
26
26.1
26.2
Flexi System External Alarm Module (FSEB) description.......... 101
Flexi System External Alarm Module (FSEB) operation............ 101
Flexi System External Alarm Module (FSEB) dimensions and
weight.........................................................................................102
Flexi System External Alarm Module (FSEB) interfaces............103
22.2.1
22.2.2
22.2.3
22.3
22.3.1
22.3.2
26.3
27
27.1
27.2
27.3
27.4
Flexi Capacity Extension Submodule (FBBA) description......... 105
Flexi Capacity Extension Submodule (FBBA) operation............105
Flexi Capacity Extension Submodule (FBBA) dimensions and
weight.........................................................................................105
Flexi Capacity Extension Submodule (FBBA) interfaces........... 106
Flexi Capacity Extension Submodule (FBBA) LED indications..107
28
28.1
Flexi Baseband Extension Module (FBBC) description............. 108
Flexi Baseband Extension Module (FBBC) operation................108
DN09142347 Issue: 07
© 2017 Nokia
5
Nokia Base Station Optional Items Description
28.2
28.3
28.4
Flexi Baseband Extension Module (FBBC) dimensions and weight
................................................................................................... 108
Flexi Baseband Extension Module (FBBC) interfaces............... 109
Flexi Baseband Extension Module (FBBC) LED indications......109
29
29.1
29.1.1
29.1.2
29.1.3
29.2
29.2.1
29.2.2
29.2.3
29.3
29.3.1
29.3.2
29.3.3
29.4
29.4.1
29.4.2
29.4.3
29.4.4
Overview of Flexi Cabinets......................................................... 111
Flexi Cabinet for Indoor (FCIA) description................................ 111
Flexi Cabinet for Indoor (FCIA) construction.............................. 111
Flexi Cabinet for Indoor (FCIA) optional items........................... 112
Flexi Cabinet for Indoor (FCIA) dimensions and weight............. 112
Flexi Cabinet for Outdoor (FCOA) description............................113
Flexi Cabinet for Outdoor (FCOA) construction..........................113
Flexi Cabinet for Outdoor (FCOA) optional items.......................114
Flexi Cabinet for Outdoor (FCOA) dimensions and weight........ 117
Flexi Cabinet Outdoor Small (FCOS) description.......................117
Flexi Cabinet Outdoor Small (FCOS) construction.....................118
Flexi Cabinet Outdoor Small (FCOS) optional items.................. 119
Flexi Cabinet Outdoor Small (FCOS) dimensions and weight....119
Flexi Cabinet Outdoor (FCOB) description.................................119
Flexi Cabinet Outdoor (FCOB) construction.............................. 120
Flexi Cabinet Outdoor (FCOB) dimensions and weight............. 121
Flexi Cabinet Outdoor (FCOB) interfaces.................................. 121
Flexi Cabinet Outdoor (FCOB) LED indications.........................123
30
30.1
BTS power consumption............................................................ 124
Power consumption of Flexi Outdoor Cabinet fans (FCFA, FCSA,
and FCOS)................................................................................. 124
31
31.1
31.1.1
31.1.2
31.1.3
31.1.4
31.2
Region-specific hardware descriptions...................................... 125
Repeater Interface Module (FHCC) description.........................125
Repeater Interface Module (FHCC) operation........................... 125
Repeater Interface Module (FHCC) dimensions and weight......126
Repeater Interface Module (FHCC) interfaces...........................126
Repeater Interface Module (FHCC) LED indications................. 127
Cable Holder for Flexi System Module 10 indoor FSIH/FBIH
(FCHB) description.....................................................................128
32
32.1
32.1.1
32.1.2
GPS specific hardware description............................................ 130
GPS GLONASS Receiver Antenna (FYGB) description............ 130
GPS GLONASS Receiver Antenna (FYGB) operation.............. 131
GPS GLONASS Receiver Antenna (FYGB) dimensions and
weight.........................................................................................134
Flexi GPS Box (FYGD) description............................................ 135
Flexi GPS Box (FYGD) operation.............................................. 135
Flexi GPS Box (FYGD) dimensions and weight.........................136
Flexi GPS Box (FYGD) interfaces..............................................136
Flexi GPS Box (FYGD) LED indications.................................... 137
Flexi Enhanced External GPS Box (FYGE) description.............137
32.2
32.2.1
32.2.2
32.2.3
32.2.4
32.3
6
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
32.3.1
32.3.2
32.5
32.5.1
32.5.2
32.5.3
32.5.4
Flexi Enhanced External GPS Box (FYGE) operation............... 137
Flexi Enhanced External GPS Box (FYGE) dimensions and weight
................................................................................................... 139
Flexi Enhanced External GPS Box (FYGE) interfaces...............139
Flexi Enhanced External GPS Box (FYGE) LED indications..... 139
OD External GNSS Enhanced Holdover (FYGG) description....140
OD External GNSS Enhanced Holdover (FYGG) operation...... 140
OD External GNSS Enhanced Holdover (FYGG) dimensions and
weight.........................................................................................141
OD External GNSS Enhanced Holdover (FYGG) interfaces......142
OD External GNSS Enhanced Holdover (FYGG) LED indications..
142
Outdoor GNSS Receiver (FYGM) description............................143
Outdoor GNSS Receiver (FYGM) operation.............................. 143
Outdoor GNSS Receiver (FYGM) dimensions and weight........ 145
Outdoor GNSS Receiver (FYGM) interfaces............................. 145
Outdoor GNSS Receiver (FYGM) LED indications.................... 146
33
33.1
33.2
33.3
33.4
33.5
33.6
33.7
33.8
33.9
33.10
Nokia Base Station cables and SFPs........................................ 147
Transmission cables...................................................................147
Single-mode fiber cables............................................................151
Multi-mode fiber cables.............................................................. 164
Small form-factor pluggable transceivers (SFPs).......................177
DC feeding and extension kit cables..........................................189
Synchronization cables.............................................................. 191
GPS feeding cables................................................................... 192
EAC cables................................................................................ 193
Upgrade Cable Kit (EUCA)........................................................ 197
Miscellaneous cables................................................................. 197
34
Appendix Casing and cover kits need for Flexi Multiradio units.199
32.3.3
32.3.4
32.4
32.4.1
32.4.2
32.4.3
32.4.4
DN09142347 Issue: 07
© 2017 Nokia
7
Nokia Base Station Optional Items Description
List of Figures
8
Figure 1
List of countries respecting EU Directive 2014/53/EU........................22
Figure 2
Flexi Fiber OD LC-LC Adapter (FSGD).............................................. 24
Figure 3
FSGD delivery contents......................................................................25
Figure 4
Release 4 Book Mount delivery contents........................................... 26
Figure 5
Flexi Mounting Kit for Floor, Wall and Pole (FMFA)............................28
Figure 6
External interfaces of Flexi Mounting Kit for Floor, Wall and Pole
(FMFA)................................................................................................29
Figure 7
Flexi Pole Kit (FPKA)..........................................................................31
Figure 8
FPKA with three Remote Radio Heads.............................................. 32
Figure 9
FPKA with four 3U Flexi Modules.......................................................33
Figure 10
Flexi Pole Kit (FPKC)..........................................................................34
Figure 11
Two RRHs installed on two FPKCs.................................................... 36
Figure 12
Expansion paths................................................................................. 37
Figure 13
Basic FPKC configurations with no expansion path........................... 38
Figure 14
FPKC and RRH configurations, expansion path 1............................. 39
Figure 15
FPKC and RRH configurations, expansion path 2............................. 39
Figure 16
FPKC and 2U/3U module configurations using FMFA....................... 40
Figure 17
Flexi Pole Installation Kit (FPIA)......................................................... 41
Figure 18
Flexi Mounting Auxiliary Bracket (FMAA)........................................... 42
Figure 19
Flexi Mounting Covers for Back and Front 3U (FMCA)...................... 43
Figure 20
Flexi Module Casing (EMHA) ............................................................ 46
Figure 21
Flexi 3U Casing and High Covers F&B (EMHH)................................ 47
Figure 22
Flexi Module Casing (EMTA).............................................................. 47
Figure 23
Stress relief corpus.............................................................................48
Figure 24
Flexi Side Covers (FMHA)..................................................................49
Figure 25
Flexi Side Covers (FMTA).................................................................. 49
Figure 26
Flexi 3U face down casing pole & wall (EMHD)................................. 52
Figure 27
EMHD delivery contents..................................................................... 53
Figure 28
Flexi Power Module (FPMA)...............................................................54
Figure 29
Flexi Power Module (FPMA) with a full configuration of two FPAAs
and two FPBBs...................................................................................54
Figure 30
FPMA alarm options........................................................................... 55
Figure 31
FPAA LED.......................................................................................... 60
Figure 32
FPBB LED.......................................................................................... 61
Figure 33
Slotpack AC/ DC power solution for FCOB........................................ 62
Figure 34
Interfaces in the Slotpack AC/DC power solution...............................63
Figure 35
Flexi Power DC/DC Module (FPDA)...................................................66
Figure 36
FPDA front panel................................................................................ 68
Figure 37
Flexi Power Rectifier (FPRB)..............................................................69
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Figure 38
Flexi Power Battery (FPBC)............................................................... 72
Figure 39
Flexi Power AC/DC Submodule 230 V (FPAD).................................. 75
Figure 40
Flexi Power AC/DC Submodule 230 V (FPAE).................................. 78
Figure 41
FPAE in vertical position..................................................................... 79
Figure 42
Flexi Power Distribution and Fuses (FPFB)....................................... 83
Figure 43
Flexi Power Distribution and Fuses Outdoor (FPFC) (Efore)............. 84
Figure 44
Flexi Power Distribution Submodule (FPFD) (Artesyn)...................... 87
Figure 45
Flexi Power Distribution Submodule (FPFD) (Efore)..........................88
Figure 46
FPFD DC input connector dimensions (Artesyn)................................89
Figure 47
FPFD DC input connector dimensions (Efore)................................... 89
Figure 48
FPFD DC output connector dimensions (Artesyn)............................. 90
Figure 49
FPFD DC output connector dimensions (Efore)................................. 90
Figure 50
Flexi Power Distribution and Fuses Indoor (FPFI)..............................91
Figure 51
Flexi Power Distribution and Fuses Indoor (FPFI) front panel............92
Figure 52
Flexi System External OVP (FSES)................................................... 93
Figure 53
Flexi System External OVP (FSES) interfaces...................................95
Figure 54
Flexi System External OVP (FSEP)................................................... 96
Figure 55
Flexi System External OVP (FSEP) interfaces...................................98
Figure 56
Flexi Fiber Optical Distribution Unit (FODA).......................................99
Figure 57
Flexi System External Alarm Module (FSEB)...................................101
Figure 58
FSEB interfaces................................................................................103
Figure 59
FSEB PWB....................................................................................... 104
Figure 60
Flexi Capacity Extension Submodule (FBBA).................................. 105
Figure 61
Flexi Baseband Extension Module (FBBC)...................................... 108
Figure 62
Flexi Baseband Extension Module (FBBC) LEDs.............................110
Figure 63
Flexi Cabinet for Indoor (FCIA)......................................................... 111
Figure 64
Flexi Cabinet for Outdoor (FCOA).................................................... 113
Figure 65
Flexi Cabinet Air Filter (FCFA).......................................................... 115
Figure 66
Flexi Cabinet Site Support Module (FCSA)...................................... 116
Figure 67
Flexi Cabinet Outdoor Small (FCOS) installed on the floor.............. 118
Figure 68
Flexi Cabinet Outdoor (FCOB) 473240A installed vertically on the floor
..........................................................................................................120
Figure 69
Flexi Cabinet Outdoor (FCOB) dimensions and weight....................121
Figure 70
Flexi Cabinet Outdoor (FCOB) PDU interfaces................................ 122
Figure 71
Repeater Interface Module (FHCC)..................................................125
Figure 72
Front panel view of Repeater Interface Module (FHCC).................. 127
Figure 73
Cable Holder for Flexi System Module 10 indoor FSIH/FBIH (FCHB)...
129
Figure 74
GPS GLONASS Receiver Antenna (FYGB).....................................131
Figure 75
FYGB mounted on a pole using GPS Mounting Kit (FYMA)............ 132
Figure 76
Flexi GPS Surge Protector Kit (FYEA) v. 103...................................132
DN09142347 Issue: 07
© 2017 Nokia
9
Nokia Base Station Optional Items Description
10
Figure 77
Flexi GPS Surge Protector Kit (FYEA) v. 104...................................133
Figure 78
Sync In port on the FSMC/D/E front panel....................................... 133
Figure 79
Sync In port on the FSMF front panel...............................................134
Figure 80
GPS Box deployment....................................................................... 136
Figure 81
Flexi GPS Box (FYGD) front panel...................................................137
Figure 82
FYGE deployment............................................................................ 138
Figure 83
Flexi Enhanced External GPS Box (FYGE) front panel....................139
Figure 84
OD External GNSS Enhanced Holdover (FYGG).............................140
Figure 85
FYGG deployment............................................................................141
Figure 86
OD External GNSS Enhanced Holdover (FYGG) front panel...........142
Figure 87
Outdoor GNSS Receiver (FYGM).................................................... 143
Figure 88
Installation option 1: FYGM next to System Module.........................144
Figure 89
Installation option 2: FYGM away from System Module...................145
Figure 90
Outdoor GNSS Receiver (FYGM) interfaces....................................146
Figure 91
FTCY OD Cable RJ48C Cat7 15 m..................................................147
Figure 92
FTCB OD Cable RJ48C 120 Ω 15 ...................................................148
Figure 93
FTCV OD Cable RJ48C 120 Ω 30 m ...............................................149
Figure 94
FTCE OD Cable SMB-F/0 75 Ω 15 m...............................................149
Figure 95
FTCG OD Cable SMB-F/0 75 Ω 50 m.............................................. 149
Figure 96
FTCH OD Cable LC SM 1310 15 m................................................. 150
Figure 97
FTCJ OD Cable TNC-F7OTNC M/O 50 Ω 2.5 m..............................150
Figure 98
FTCP OD Cable MDR68 100 Ω 30 m...............................................151
Figure 99
FSOR Flexi System fiber SM 4 m.....................................................152
Figure 100
FSOP Flexi SM fiber 90-90 10 m......................................................152
Figure 101
FSOS Flexi SM fiber 90-90 25 m......................................................152
Figure 102
FSON Flexi SM fiber 0-90 5 m......................................................... 153
Figure 103
FSOH Flexi RRH System fiber SM 10..............................................153
Figure 104
FSOL Flexi RRH System fiber SM 50 ............................................. 154
Figure 105
FSOO Flexi RRH System fiber SM 110 m........................................ 154
Figure 106
FSOQ Flexi RRH System fiber SM 200 m........................................155
Figure 107
FSFL MM fiber 90-90 2 m.................................................................166
Figure 108
FSFF Flexi System fiber F 10 m.......................................................166
Figure 109
FSFG Flexi System fiber G 20 m......................................................167
Figure 110
FSFH Flexi System fiber H 30 m...................................................... 167
Figure 111
FSFI Flexi System fiber I 40 m......................................................... 168
Figure 112
FSFB Flexi System fiber B 50 m...................................................... 168
Figure 113
FSFK Flexi System fiber K 75 m...................................................... 169
Figure 114
FSFC Flexi System fiber C 100 m.................................................... 169
Figure 115
FSFP Flexi System fiber P 200 m.................................................... 170
Figure 116
FSFO Flexi System fiber HF 2 m......................................................170
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Figure 117
FSFQ Flexi System fiber HF 50 m....................................................171
Figure 118
FSFE Flexi System fiber MM 2 m.....................................................171
Figure 119
FSFN OM3 MM fiber 90-90, 200 m.................................................. 172
Figure 120
FSOA Flexi RRH System fiber MM 10 m......................................... 173
Figure 121
FSOB Flexi RRH System fiber MM 20 m......................................... 173
Figure 122
FSOC Flexi RRH System fiber MM 30 m......................................... 174
Figure 123
FSOE Flexi RRH System fiber MM 75 m......................................... 174
Figure 124
FYTG Flexi RRH System fiber MM 100 m........................................175
Figure 125
Optical Interface support with FSMF + RFM/RRH 3 Gbit OBSAI..... 182
Figure 126
Optical Interface support with FSMF + RFM/RRH 6 Gbit OBSAI..... 183
Figure 127
Optical Interface support with FSMF + FSMF.................................. 183
Figure 128
Optical Interface support with FSMC/D/E or ESMB/C + RFM/RRH 3
Gbit OBSAI....................................................................................... 184
Figure 129
Optical Interface support with FSMC/D/E or ESMB/C + RFM/RRH 6
Gbit OBSAI....................................................................................... 184
Figure 130
Optical Interface support with FSIH + RFM/RRH............................. 185
Figure 131
Optical Interface support with ESMB/C + FSMC/D/E + RFM/RRH.. 186
Figure 132
Optical Interface support with ESMB/C + FSMF + RFM/RRH..........187
Figure 133
Optical Interface support with FSMC/D/E + FSMF + RFM/RRH...... 188
Figure 134
FPCA Dual power cable 2 m............................................................ 190
Figure 135
FPCB DC cable multi-beam - multi-beam 2 m................................. 190
Figure 136
FPCC DC cable multi-beam - open 2 m........................................... 191
Figure 137
Standard DC cable open - open (single cable).................................191
Figure 138
FTCR OD cable RJ-45 Cat5e 15 m..................................................194
Figure 139
FTCS OD cable RJ-45 Cat5e 30 m.................................................. 194
Figure 140
FTCT OD cable RJ-45 Cat5e 50 m.................................................. 194
Figure 141
FSAD Flexi RRH System alarm cable 2.5 m/FSAC Flexi RRH System
alarm cable 15 m.............................................................................. 195
Figure 142
FTSJ EAC cable MDR36 - D37 2.5 m.............................................. 196
Figure 143
Example of EUCA usage..................................................................197
DN09142347 Issue: 07
© 2017 Nokia
11
Nokia Base Station Optional Items Description
List of Tables
12
Table 1
Releases covered by the document................................................... 17
Table 2
FMFA dimensions and weight............................................................ 30
Table 3
FPKA dimensions and weight.............................................................33
Table 4
2U/3U modules inside casings........................................................... 34
Table 5
Number of FPKC required.................................................................. 35
Table 6
FPKC dimensions and weight............................................................ 40
Table 7
Grounding cable................................................................................. 44
Table 8
FMCA dimensions.............................................................................. 44
Table 9
FMCH dimensions.............................................................................. 44
Table 10
FMCB dimensions.............................................................................. 44
Table 11
EMHA dimensions and weight............................................................50
Table 12
EMHH dimensions and weight (covers excluded).............................. 50
Table 13
EMTA dimensions and weight (covers excluded)............................... 51
Table 14
EMHD dimensions and weight........................................................... 53
Table 15
Examples of FPAA and FPBB submodules required in a configuration.
57
Table 16
FPMA dimensions and weight............................................................ 57
Table 17
FPMA front panel connectors, types, and purposes...........................58
Table 18
FPMA DC cables................................................................................ 58
Table 19
FPAA front panel connectors, types, and purposes........................... 58
Table 20
FPAA and FPBB alarm interface pin map.......................................... 59
Table 21
FPBB front panel connectors, types, and purposes........................... 59
Table 22
FPAA LED indications........................................................................ 60
Table 23
Flexi Power Battery Submodule (FPBB) LED indications.................. 61
Table 24
Slotpack AC/DC power solution dimensions and weight....................62
Table 25
Slotpack AC/DC power solution interfaces.........................................64
Table 26
Slotpack's LED indications in the Rectifiers part................................ 65
Table 27
Slotpack's LED indications in the Smartpack part.............................. 65
Table 28
FPDA dimensions and weight............................................................ 67
Table 29
FPDA front panel connectors, connector types, and purposes.......... 67
Table 30
FPDA LED indications........................................................................ 68
Table 31
FPRB dimensions and weights...........................................................70
Table 32
FPRB rectifier dimensions and weights..............................................70
Table 33
FPRB LED indications........................................................................ 70
Table 34
FPBC power considerations............................................................... 72
Table 35
FPBC loads and back-up times (new battery pack)........................... 73
Table 36
FPBC dimensions and weight............................................................ 73
Table 37
FPBC interfaces................................................................................. 73
Table 38
FPBC LED indications........................................................................ 74
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 39
FPAD dimensions and weight.............................................................76
Table 40
FPAD interfaces..................................................................................76
Table 41
FPAD AC input connector pin configuration....................................... 77
Table 42
FPAD DC output cable....................................................................... 77
Table 43
FPAD LED indications........................................................................ 77
Table 44
FPAE dimensions and weight............................................................. 79
Table 45
FPAE interfaces.................................................................................. 80
Table 46
FPAE AC input connector pin configuration....................................... 80
Table 47
FPAE DC output cable........................................................................80
Table 48
FPAE LED indicationsC...................................................................... 81
Table 49
Overview of Flexi Power Distribution Units.........................................82
Table 50
FPFB dimensions............................................................................... 84
Table 51
Comparison between FPFC v.102 and FPFC v.203...........................85
Table 52
FPFC alarm interface pin map............................................................86
Table 53
FPFC dimensions and weight.............................................................86
Table 54
FPFC LED indications........................................................................ 87
Table 55
FPFD dimensions and weight.............................................................89
Table 56
FPFD LED indications........................................................................ 90
Table 57
FPFI dimensions.................................................................................92
Table 58
FSES dimensions and weight.............................................................94
Table 59
Allowed cable thicknesses for FSES.................................................. 95
Table 60
FSEP dimensions and weight.............................................................97
Table 61
FSEP interfaces..................................................................................97
Table 62
FODA dimensions............................................................................ 100
Table 63
Alarms supported by System Module variants................................. 101
Table 64
FSEB dimensions and weight...........................................................102
Table 65
FSEB interface and connector overview.......................................... 103
Table 66
FBBA dimensions and weight...........................................................106
Table 67
FBBA interfaces................................................................................106
Table 68
FBBA LED indications...................................................................... 107
Table 69
FBBC dimensions and weight.......................................................... 109
Table 70
FBBC interfaces............................................................................... 109
Table 71
LED indications................................................................................. 110
Table 72
FCIA dimensions and weight............................................................ 113
Table 73
FCOA dimensions and weights........................................................ 117
Table 74
FCOS dimensions and weight.......................................................... 119
Table 75
FCOB dimensions and weight.......................................................... 121
Table 76
FCOB PDU box interfaces................................................................122
Table 77
FCOB cabinet interfaces.................................................................. 122
Table 78
FCOB LED indications......................................................................123
DN09142347 Issue: 07
© 2017 Nokia
13
Nokia Base Station Optional Items Description
14
Table 79
Power consumption of Flexi Outdoor Cabinet fans (FCFA, FCSA, and
FCOS).............................................................................................. 124
Table 80
FHCC dimensions and weight.......................................................... 126
Table 81
FHCC interfaces............................................................................... 126
Table 82
FHCC LED indications......................................................................127
Table 83
FYEA supply voltage........................................................................ 133
Table 84
FYGB dimensions and weight.......................................................... 134
Table 85
GPS Mounting Kit (FYMA) dimensions (antenna excluded).............134
Table 86
Flexi GPS Surge Protector Kit (FYEA) dimensions and weight........135
Table 87
FYGD dimensions and weight.......................................................... 136
Table 88
FYGD interfaces............................................................................... 137
Table 89
FYGE dimensions and weight.......................................................... 139
Table 90
FYGE interfaces............................................................................... 139
Table 91
FYGE LED indications......................................................................139
Table 92
FYGG dimensions and weight..........................................................141
Table 93
FYGG interfaces...............................................................................142
Table 94
FYGG LED indications..................................................................... 142
Table 95
FYGM dimensions and weight..........................................................145
Table 96
FYGM interfaces...............................................................................146
Table 97
FYGM LED indications..................................................................... 146
Table 98
Flexi Multiradio 10 BTS transmission cables....................................147
Table 99
Flexi Multiradio BTS transmission cables.........................................147
Table 100
Flexi Multiradio BTS GSM/EDGE transmission cables.................... 151
Table 101
Single-mode fibers 90°-90°...............................................................151
Table 102
Single-mode fibers 0°-90°.................................................................152
Table 103
Single-mode fibers 90L-90R.............................................................155
Table 104
Single-mode outdoor-outdoor fibers (Flexible) ................................ 155
Table 105
Single-mode dual indoor-indoor unit-to-unit fibers (Flexible) ...........156
Table 106
Single-mode dual outdoor-indoor unit-to-unit fibers (Flexible) .........156
Table 107
Single-mode dual outdoor-indoor unit-to-junction box fibers with FC
connector (Flexible) ......................................................................... 157
Table 108
Single-mode dual indoor-indoor unit-to-junction box fibers with FC
connector (Flexible).......................................................................... 158
Table 109
Single-mode dual indoor-indoor unit-to-junction box fibers with SC
connector (Flexible).......................................................................... 158
Table 110
Single-mode dual outdoor-indoor unit-to-junction box fibers with SC
connector (Flexible).......................................................................... 159
Table 111
Single-mode dual indoor-indoor unit-to-unit fibers (Flexible)............159
Table 112
Single-mode dual indoor-indoor unit-to-junction box fibers with FC
connector (Flexible).......................................................................... 160
Table 113
Single-mode dual indoor-indoor unit-to-junction box fibers with SC
connector (Flexible).......................................................................... 161
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 114
Single-mode single outdoor-indoor fibers for BiDi SFP use (Flexible)...
161
Table 115
Single-mode single indoor-indoor fibers for BiDi SFP use (Flexible)......
162
Table 116
Single-mode indoor-indoor 2 x dual fibers (Flexible) with 2 x (3, 6 and
10 GB) SFP...................................................................................... 162
Table 117
Single-mode outdoor-outdoor 2 x dual fibers (Flexible) with 2 x (3, 6
and 10 GB) SFP............................................................................... 163
Table 118
Single-mode outdoor-indoor 2 x dual fibers (Flexible) with 2 x (3, 6
and 10 GB) SFP............................................................................... 164
Table 119
Multi-mode fibers 90°-90° OM2........................................................ 164
Table 120
Multi-mode fibers 90°-90° OM3........................................................ 171
Table 121
Multi-mode fibers 0°-90° OM2.......................................................... 172
Table 122
Multi-mode fibers 90L-90R............................................................... 175
Table 123
Multi-mode fibers straight (0°-0° OM2)............................................. 175
Table 124
Multi-mode dual indoor-indoor unit-to-unit fibers (Flexible).............. 176
Table 125
Multi-mode outdoor-outdoor OM2 fibers (Flexible)...........................176
Table 126
Multi-mode outdoor-outdoor OM3 fibers (Flexible)...........................176
Table 127
Multi-mode dual indoor-indoor unit-to-unit fibers (Flexible).............. 176
Table 128
Multi-mode dual outdoor-outdoor unit-to-unit fibers (Flexible)..........177
Table 129
3 Gbit SFPs...................................................................................... 178
Table 130
6 Gbit SFPs...................................................................................... 178
Table 131
1 Gbit transmission SFPs................................................................. 179
Table 132
9.8 Gbit/6 Gbit dual speed SFPs...................................................... 179
Table 133
6 Gbit BiDi SFPs...............................................................................179
Table 134
2.5/3GB BiDi SFPs........................................................................... 180
Table 135
Optical Interface support with FSMF + RFM/RRH 3 Gbit OBSAI..... 182
Table 136
Optical Interface support with FSMF + RFM/RRH 6 Gbit OBSAI..... 183
Table 137
Optical Interface support with FSMF + FSMF.................................. 183
Table 138
Optical Interface support with FSMC/D/E or ESMB/C + RFM/RRH 3
Gbit OBSAI....................................................................................... 184
Table 139
Optical Interface support with FSMF + RFM/RRH 6 Gbit OBSAI..... 184
Table 140
Optical Interface support with FSIH + RFM/RRH............................. 185
Table 141
Optical Interface support with ESMB/C + FSMC/D/E + RFM/RRH . 186
Table 142
Optical Interface support with ESMB/C + FSMF + RFM/RRH..........187
Table 143
Optical Interface support with FSMC/D/E + FSMF + RFM/RRH...... 189
Table 144
DC feeding cables............................................................................ 189
Table 145
Extension kit cables..........................................................................191
Table 146
Flexi Multiradio BTS synchronization cables.................................... 191
Table 147
GPS feeding cables for System Module variants FSMF.................. 192
Table 148
GPS feeding cables for System Module variants FSMC/D/E........... 193
Table 149
Flexi Multiradio BTS EAC cables......................................................193
DN09142347 Issue: 07
© 2017 Nokia
15
Nokia Base Station Optional Items Description
16
Table 150
Flexi Multiradio BTS miscellaneous cables...................................... 197
Table 151
Casing and cover kits need for System Modules............................. 199
Table 152
Casing and cover kits need for Radio Modules................................ 199
Table 153
Casing and cover kits need for Power Modules............................... 202
Table 154
EMHA compatibility with Flexi EDGE System Modules....................202
Table 155
FMCA compatibility with Flexi Multiradio System Modules.............. 203
Table 156
FMCA compatibility with Flexi Power Module (FPMA)..................... 203
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Summary of changes
Summary of changes
Changes between document issues are cumulative. Therefore, the latest document
issue contains all changes made to previous issues.
Note that the issue numbering system is changing. For more information, see Guide to
WCDMA RAN and I-HSPA Documentation.
This document is common for all Radio Access Technologies (RAT). You may find here
information about solutions that are not available or supported in a specific SW release
or RAT. Table 1: Releases covered by the document lists all SW releases covered by the
content of this document. For features supported in your SW release, see the respective
feature documentation chapter in the system library.
Table 1
Releases covered by the document
Product
Release
GSM/EDGE (BSS)
RG40 (BSS), GSM 16, GSM 17
WCDMA RAN
RU50, RU50 EP1, WCDMA 16, WCDMA 17
Long Term Evolution
FDD-LTE 15A, FDD-LTE 16, FDD-LTE 16A, FDD-LTE 17
TD-LTE
TD-LTE 15A, TD-LTE 16, TD-LTE 16A, TD-LTE 17
Changes between issues 06A (2016-08-22) and 07 (2017-01-27)
CE marking
•
Chapter has been updated with new Directive.
AMPA Pole Mounting Kit (30-120 mm) overview
•
has been updated.
Flexi Fiber OD LC-LC Adapter (FSGD) description
•
New chapter.
Flexi Pole Installation Kit (FPIA) description
•
Supported pole sizes have been changed.
Flexi 3U Face Down Casing Pole & Wall (EMHD) description
•
•
•
EMHD delivery contents have been added.
Grounding plate and FBBx side fixing have been added to EMHD delivery contents
list.
Figure 27: EMHD delivery contents and Figure 26: Flexi 3U face down casing pole &
wall (EMHD) have been updated.
Flexi System External Alarm Module (FSEB) operation
•
•
DN09142347 Issue: 07
Information related to the Flexi Cabinet Fire Detector (FCDA) has been removed due
to hardware phase out.
Table 63: Alarms supported by System Module variants: information about FSMF
(SBTS) has been added.
© 2017 Nokia
17
Summary of changes
Nokia Base Station Optional Items Description
•
•
Table 63: Alarms supported by System Module variants: information about
requirements in FSMF (LTE) and FSMF (GSM/EDGE) has been updated.
Note about supported alarms in FSMF (LTE) and FSMF (GSM/EDGE) without FSEB
has been added.
Flexi Cabinet for Outdoor (FCOA) optional items
•
Information related to the Flexi Cabinet Fire Detector (FCDA) has been removed due
to hardware phase out.
GPS GLONASS Receiver Antenna (FYGB) operation
•
The note about FYGB support of GPS and GLONASS satellite systems has been
extended with the information on GLONASS-only mode support.
Single-mode fiber cables
•
Information related to the following hardware items have been removed due to
hardware phase-out:
–
–
–
–
–
–
–
FUFBG SM OD fiber LC OD-LC OD dual 10 m
FUFBI SM OD fiber LC OD-LC OD dual 200 m
FUFBF SM OD fiber LC OD-LC OD dual 50 m
FUFBH SM OD fiber LC OD-LC OD dual 100 m
FUFAJ SM OD fiber LC OD-LC OD dual 5 m
FUFAN SM OD fiber LC OD-LC OD dual 2 m
FUFBE SM OD fiber LC OD-LC OD dual 30 m
Multi-mode fiber cables
•
Information related to the following hardware items have been removed due to
hardware phase-out:
–
–
–
–
–
–
FUFBB MM OD fiber LC OD-LC OD dual 50 m
FUFAY MM OD fiber LC OD-LC OD dual 100 m
FUFBC MM OD fiber LC OD-LC OD dual 10 m
FUFBA MM OD fiber LC OD-LC OD dual 30 m
FUFBD MM OD fiber LC OD-LC OD dual 200 m
FUFAS MM OD fiber LC OD-LC OD dual 2 m
Changes between issues 06 (2016-06-30) and 06A (2016-08-22)
Flexi Release 4 Book Mount Kit (FMFB/FMFH) description
•
New chapter has been added.
Flexi 3U Face Down Casing Pole & Wall (EMHD) description
•
•
Installation options have been updated.
EMHD delivery contents have been added.
Flexi 3U Face Down Casing Pole & Wall (EMHD) dimensions and weight
•
18
Table 14: EMHD dimensions and weight has been updated.
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Summary of changes
Flexi Power Battery (FPBC) description
•
•
Figure 38: Flexi Power Battery (FPBC) has been updated.
The version of FPBC has been changed for CS7000052 from CS7000051.
BTS power consumption
•
New chapter has been added.
Nokia Base Station cables and SFPs
•
The chapter has been renamed.
Changes between issues 05 (2016-02-19) and 06 (2016-06-30)
The document has been renamed as Nokia Base Station Optional Items Description.
Slotpack AC/DC power solution for FCOB
•
New chapter has been added.
Outdoor GNSS Receiver (FYGM) description
•
New chapter has been added.
Flexi 3U face down casing pole & wall (EMHD) description
Flexi 3U face down casing pole & wall (EMHD) dimensions and weight has been added.
Updated chapters:
Flexi Mounting Auxiliary Bracket (FMAA) description
•
Flexi Mounting Auxiliary Bracket (FMAA) weight has been added.
GPS Antenna Kit (FYGA) and GPS GLONASS Receiver Antenna (FYGB)
description
•
Information on GPS Mounting Kit (FYMA) has been updated.
GPS GLONASS Receiver Antenna (FYGB) dimensions and weight
•
DN09142347 Issue: 07
GPS Mounting Kit (FYMA) weight has been added.
© 2017 Nokia
19
RSS-310 compliance
Nokia Base Station Optional Items Description
1 RSS-310 compliance
This equipment complies with RSS-310 of Industry Canada. Operation is subject to the
condition that this device does not cause harmful interference.
20
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
EU RoHS statement
2 EU RoHS statement
This equipment complies with the European Union RoHS Directive 2011/65/EU on the
restriction of the use of certain hazardous substances in electrical and electronic
equipment. The directive applies to the use of lead, mercury, cadmium, hexavalent
chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl ethers (PBDE)
in electrical and electronic equipment.
DN09142347 Issue: 07
© 2017 Nokia
21
CE marking
Nokia Base Station Optional Items Description
3 CE marking
Declaration of Conformity with Regard to the EU Directive 2014/53/EU (RED
Directive)
Hereby, Nokia declares that this equipment is in compliance with the essential
requirements and other relevant provisions of Directive: 2014/53/EU.
Figure 1
List of countries respecting EU Directive 2014/53/EU
RED Directive2014/53/EU
AT
ü
FR
ü
LV
ü
LI
ü
BE
ü
DE
ü
LT
ü
RO
ü
BG
ü
GB
ü
LU
ü
SK
ü
CY
ü
GR
ü
MT
ü
SI
ü
CZ
ü
HU
ü
NL
ü
ES
ü
DK
ü
IS
ü
NO
ü
SE
ü
EE
ü
IE
ü
PL
ü
CH
ü
FI
ü
IT
ü
PT
ü
TR
ü
This declaration is only valid for configurations (combinations of software, firmware, and
hardware) provided and/or supported by Nokia.
22
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
FCC Part 15 compliance
4 FCC Part 15 compliance
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference, in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manuals, might cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense. Changes or modifications not expressly approved by
the party responsible for compliance could void the user´s authority to operate the
equipment.
DN09142347 Issue: 07
© 2017 Nokia
23
Flexi Fiber OD LC-LC Adapter (FSGD) description
Nokia Base Station Optional Items Description
5 Flexi Fiber OD LC-LC Adapter (FSGD)
description
Hardware description of the Flexi Fiber OD LC-LC Adapter (FSGD) 473904A
Flexi Fiber OD LC-LC Adapter (FSGD) allows connect two fibers together. Connection
tube supports outdoor fibers with 5 mm (0.2 in.) outer diameter (4.5–5.5 mm (0.18–0.22
in.)), with straight ends. Free inside length is 280 mm (11 in.).
g
Note: FSGD can be installed both in vertical and horizontal position using cable ties.
The FSGD provides the following features:
•
•
•
•
•
Support both single-mode and multi-mode fiber cables
IP67 Ingress Protection in each position (according to IEC 529)
Tensile strength for cable is 100 N
Operating temperature is in the range of -40°C to +55°C (-40°F to +131°F)
Installation temperature is in the range of -20°C to +60°C (-4°F to +140°F)
Figure 2
Flexi Fiber OD LC-LC Adapter (FSGD)
The Flexi Fiber OD LC-LC Adapter (FSGD) consists of:
•
•
•
•
•
•
•
24
Single-mode LC-LC adapter with dust caps
Protection tube
Two cable ties 300 x 4.8 mm BLK UV
Two claws
Two cable glands
Two locking nuts
Installation sheet
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Figure 3
FSGD delivery contents
1pcprotectiontube
2pcslockingnut
DN09142347 Issue: 07
Flexi Fiber OD LC-LC Adapter (FSGD) description
2pcs claws
2pcs cableglands
1pcsingle-modeLC-LC
adapterwithdustcaps
© 2017 Nokia
installation sheet
2pcs cableties300x4.8mmBLKUV
25
Flexi Release 4 Book Mount Kit (FMFB/FMFH)
description
Nokia Base Station Optional Items Description
6 Flexi Release 4 Book Mount Kit (FMFB/FMFH)
description
Hardware description and mounting principles of the Flexi Release 4 Book Mount Kit.
Flexi Release 4 Book Mount Kit is required for vertical mount installation of the Flexi
Release 4 Remote Radio Heads. Pole and wall mounting are supported. For module
dimensions with the kits installed and details which kit is required for each variant, see
Flexi Multiradio BTS RF Module and Remote Radio Head Description.
g
g
Note: Horizontal book mounting is not allowed with FMFB or FMFH.
Note: Pole-mount installation also requires an AMPA Pole Mounting Kit (30-120 mm).
The maximum allowed module weight per FMFB is 6 kg (13 lb). The maximum allowed
module weight per FMFH is 5.5 kg (12 lb).
The Flexi Release 4 Book Mount consists of:
•
•
•
Flexi 4.0 Small Book Mount Kit (FMFH) 473948A or Flexi 4.0 Large Book Mount Kit
(FMFB) 473367A
Cover assembly
Accessory kit:
–
–
–
–
–
–
–
Cable bracket
Secondary bracket
Seven cable ties
Eight M8x16 screws
DC cable clamp assembly
Two M5x12 screws
DC cable boot
Figure 4
Release 4 Book Mount delivery contents
8xM8X16screws
2xM5X12
screws
1xDCcable
7xDCcable
clampassembly
ties 1xDCcableboot
Coverassemblyfor FMFB
LargeBookMountKit
26
1xsecondary
bracket
© 2017 Nokia
1xcablebracket
Coverassemblyfor FMFHSmall
BookMountkitfor2T2R
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Flexi Release 4 Book Mount Kit (FMFB/FMFH)
description
For installation instructions, see Installing and Cabling Flexi Multiradio Remote Radio
Heads.
DN09142347 Issue: 07
© 2017 Nokia
27
Flexi Mounting Kit for Floor, Wall and Pole (FMFA)
description
Nokia Base Station Optional Items Description
7 Flexi Mounting Kit for Floor, Wall and Pole
(FMFA) description
Mounting principles and fixing interfaces of Flexi Mounting Kit for Floor, Wall and Pole
(FMFA) 470149A.
Figure 5
Flexi Mounting Kit for Floor, Wall and Pole (FMFA)
Flexi BTS modules are installed on the floor, wall or pole using Flexi Mounting Kit for
Floor, Wall and Pole (FMFA). The plinth is required for BTS site installations without a
cabinet and it provides grounding points for BTS and module grounding. The mounting
principles are the following:
•
•
•
In floor mounting, the plinth is fixed directly onto the floor. To meet the Telcordia GR63-CORE Vibrational requirements for earthquake Zone 4 requirement, the
maximum number of modules in a stack is five (maximum total height 15U). To meet
the Telcordia GR-63-CORE Vibrational requirements for earthquake Zone 2
requirement, the maximum number of modules in a stack is nine (maximum total
height 22U).
In wall mounting, the plinth is fixed directly onto the wall. The maximum number of
modules per plinth is two.
In pole mounting, the plinth is fixed onto a pole mounting kit (FPKA/FPKC). The
maximum number of modules per plinth is two.
The FMFA delivery includes two fixing plates for the casings. Used in pole and wall
installations, the plates are attached across two module casings on both sides of the
modules.
The plinth has a back stop that prevents installing the BTS too near to a wall.
External connections
The plinth has the following fixing interfaces:
•
•
•
•
28
ESD stud
Four casing fixing points
Four threads for the lifting eye bolts
12 module grounding
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
•
•
•
•
Flexi Mounting Kit for Floor, Wall and Pole (FMFA)
description
Two BTS grounding
Two casing locking points
Four anchoring points to floor
Four fixing plate fixing points
The external fixing interfaces of the FMFA are shown in Figure 6: External interfaces of
Flexi Mounting Kit for Floor, Wall and Pole (FMFA).
Figure 6
External interfaces of Flexi Mounting Kit for Floor, Wall and Pole (FMFA)
Fixingholesfor
fixingplates
Casingfixingpoints
Fixingholesfor
fixingplates
Threadsforthe
liftingeyebolts
Casinglocking
points
Threads(M12)forthe
liftingeyebolts
BTSgrounding
ESDStud
BTSgrounding
Modulesgrounding
Anchoringpointstofloor
7.1 Flexi Mounting Kit for Floor, Wall and Pole (FMFA)
dimensions and weight
Dimensions and weight of Flexi Mounting Kit for Floor, Wall and Pole (FMFA) 470149A.
DN09142347 Issue: 07
© 2017 Nokia
29
Flexi Mounting Kit for Floor, Wall and Pole (FMFA)
description
Table 2
Nokia Base Station Optional Items Description
FMFA dimensions and weight
Property
30
Value
Height
48 mm (1.9 in.)
Depth without back stop
455 mm (17.9 in.)
Width
505 mm (19.9 in.)
Weight
2.9 kg (6.39 lb)
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Flexi Pole Kit (FPKA) description
8 Flexi Pole Kit (FPKA) description
Hardware description and mounting principles of Flexi Pole Kit (FPKA) 471649A.
Figure 7
Flexi Pole Kit (FPKA)
BoltM8x20
Fixingpoints
64mm(2.5in.)
BoltM10X120
105mmthread
Fixingpoints
184mm(7.2in.)
Flexi Pole Kit (FPKA) can be used as follows:
•
•
Version 101: poles between 60 mm (2.4 in.) and 120 mm (4.7 in.) in diameter
Version 202: poles between 30 mm (1.2 in.) and 120 mm (4.7 in.) in diameter (the
bracket strainer is flipped around when the pole size is 59 mm or smaller in diameter)
The width of the fixing points is 184 mm (7.2 in.) and 64 mm (2.5 in.). There are fixing
points on three sides of the FPKA. The M10 screws must be tightened to 30 Nm (22.13
ft-lb) and the M8 screws to 20 Nm (14.75 ft-lb). The maximum allowed weight on the
FPKA is 160 kg (352.7 lb). Two FPKA kits support two FMFAs, one on each side of the
pole. Each FMFA (plinth) can support a maximum of two 2U or 3U Flexi modules with
casings, cables, and auxiliary boxes (for example, OVP). Note that for larger
configurations it is recommended to use the FPKC pole kit.
Installation with Remote Radio Heads
The FPKA has room for three Remote Radio Heads (FRIG/FRHE/FRHD/FHPC
excluded). It is possible to use three installation directions. See Figure 8: FPKA with
three Remote Radio Heads for the FPKA installation with three Remote Radio Heads.
DN09142347 Issue: 07
© 2017 Nokia
31
Flexi Pole Kit (FPKA) description
Figure 8
Nokia Base Station Optional Items Description
FPKA with three Remote Radio Heads
Installation with Flexi modules
The FPKA has room for a maximum of four 3U Flexi modules (12U total). Two modules
(or casings) can be installed on opposite sides of the FPKA. See Figure 9: FPKA with
four 3U Flexi Modules for the FPKA installation with four 3U modules.
32
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Figure 9
Flexi Pole Kit (FPKA) description
FPKA with four 3U Flexi Modules
8.1 Flexi Pole Kit (FPKA) dimensions and weight
Dimensions and weight of Flexi Pole Kit (FPKA) 471649A.
Table 3
FPKA dimensions and weight
Property
DN09142347 Issue: 07
Value
Height
47 mm (1.9 in.)
Width
274 mm (10.8 in.)
Depth
229 mm (9 in.)
Weight
Appr. 2 kg (4.4 lb)
© 2017 Nokia
33
Flexi Pole Kit (FPKC) description
Nokia Base Station Optional Items Description
9 Flexi Pole Kit (FPKC) description
Mounting principles and expansion paths of Flexi Pole Kit (FPKC) 472821A.
Figure 10
Flexi Pole Kit (FPKC)
Flexi Pole Kit (FPKC) allows four-directional installations of BTS modules and Remote
Radio Heads. The following installations are supported:
•
For 2U/3U module installations, see Table 4: 2U/3U modules inside casings:
Table 4
2U/3U modules inside casings
Pole size
Number of
2U/3U casings
FMFA required
Expansion
possible
Mixed
configurations
(casings and
RRHs)
supported
60 to 300 mm
1 to 4
(2.36 in. to 11.81
in.)
No
No
No
60 to 115 mm
(2.36 in. to 4.53
in.)
Yes
Yes
Yes
1 to 8
190 to 300 mm
(7.48 in. to 11.81
in.)
•
•
34
Up to six Remote Radio Heads (with a maximum of 425 mm (16.7 in.) total width
each, solar shields included).
Square-shaped poles and L-bar poles with L-bar size between 50 x 50 mm (2 x 2 in.)
and 210 x 210 mm (8.3 x 8.3 in.) are supported.
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Flexi Pole Kit (FPKC) description
Note that Flexi Power AC/DC Submodule (FPAD) cannot be mounted behind the RRH
with FPKC when mounted directly to a pole, or if another FPKC bracket is directly behind
the FPAD in a perpendicular configuration.
The maximum allowed weight on the FPKC is 228 kg (502.7 lb). A configuration of five
FPKC kits supports four FMFAs with eight 2U or 3U modules with casings, cables, and
auxiliary boxes (for example, OVP). If no FMFAs are used, a configuration of two FPKC
kits supports four 2U or 3U Flexi modules with casings, cables, and auxiliary boxes (for
example, OVP).
Table 5
Number of FPKC required
Number of FPKCs
DN09142347 Issue: 07
2U/3U casing
2U/3U casing + FMFA
RRH
1
N/A
N/A
N/A
2
1 to 4
1 to 4 + 1 to 2 FMFAs
1 to 2
3
-
1 to 4 + 1 to 2 FMFAs
1 to 3
4
-
1 to 6 + 1 to 3 FMFAs
1 to 4
5
-
1 to 8 + 1 to 4 FMFAs
1 to 4
6
-
-
1 to 6
© 2017 Nokia
35
Flexi Pole Kit (FPKC) description
Figure 11
Nokia Base Station Optional Items Description
Two RRHs installed on two FPKCs
Figures Figure 12: Expansion paths, Figure 13: Basic FPKC configurations with no
expansion path, Figure 14: FPKC and RRH configurations, expansion path 1, Figure 15:
FPKC and RRH configurations, expansion path 2 and Figure 16: FPKC and 2U/3U
module configurations using FMFA show the principles of creating basic and expansionoptimized configurations using FPKC kits. If you are going to expand your 2U/3U module
configurations later, utilize Flexi Mounting Kits for Floor, Wall and Pole (FMFA) starting
from the first configuration. FMFAs are required for configurations larger than four 2U/3U
modules to allow enough room for a four-directional installation.
Expansion paths
36
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
Expansion paths
FPKC
Figure 12
Flexi Pole Kit (FPKC) description
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC configurations with no expansion path
DN09142347 Issue: 07
© 2017 Nokia
37
Flexi Pole Kit (FPKC) description
Figure 13
Nokia Base Station Optional Items Description
Basic FPKC configurations with no expansion path
RRH
FPKC
RRH
RRH
FPKC
RRH
2xFPKC&2xRRH
RFM
RFM
FPKC
RFM
RFM
RFM
RFM
FPKC
RFM
RFM
2xFPKC&4xRFM
FPKC and RRH configurations, expansion path 1
38
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Figure 14
Flexi Pole Kit (FPKC) description
RRH
FPKC
RRH
RRH
FPKC
FPKC and RRH configurations, expansion path 1
RRH
FPKC
FPKC
FPKC
RRH
RRH
RRH
FPKC
RRH
RRH
RRH
6xFPKC&5xRRH
RRH
FPKC
FPKC
FPKC
FPKC
FPKC
FPKC
RRH
RRH
FPKC
RRH
RRH
4xFPKC&4xRRH
FPKC
RRH
FPKC
FPKC
4xFPKC&3xRRH
RRH
FPKC
RRH
RRH
2xFPKC&2xRRH
FPKC
FPKC
RRH
FPKC
FPKC
FPKC
6xFPKC&6xRRH
FPKC and RRH configurations, expansion path 2
FPKC and RRH configurations, expansion path 2
FPKC
FPKC
RRH
2xFPKC&2xRRH
FPKC
FPKC
FPKC
FPKC
RRH
RRH
FPKC
RRH
RRH
RRH
FPKC
FPKC
RRH
RRH
3xFPKC&3xRRH
RRH
Figure 15
4xFPKC&4xRRH
FPKC and 2U/3U module configurations using FMFA
DN09142347 Issue: 07
© 2017 Nokia
39
Flexi Pole Kit (FPKC) description
Nokia Base Station Optional Items Description
Figure 16
FPKC and 2U/3U module configurations using FMFA
RFM
RFM
FMFA
FPKC
FMFA
FPKC
RFM
FPKC
FMFA
FPKC
RFM
RFM
RFM
FPKC
2xFPKC&1xFMFA&2XRFM
FPKC
RFM
FPKC
FMFA
FPKC
RFM
FMFA
FPKC
FPKC
FMFA
FMFA
FPKC
FMFA
FPKC
RFM
RFM
RFM
RFM
RFM
RFM
RFM
RFM
FMFA
FPKC
RFM
RFM
3xFPKC&2xFMFA&4xRFM
FPKC
FMFA
RFM
4xFPKC&3xFMFA&6xRFM
RFM
5xFPKC&4xFMFA&8xRFM
9.1 Flexi Pole Kit (FPKC) dimensions and weight
Dimensions and weight of Flexi Pole Kit (FPKC) 472821A.
Table 6
FPKC dimensions and weight
Property
40
Value
Height
80 mm (3.1 in.)
Width
60 mm (2.4 in.)
Depth
430 mm (16.9 in.)
Weight (per kit)
4.9 kg (10.8 lb)
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Flexi Pole Installation Kit (FPIA) description
10 Flexi Pole Installation Kit (FPIA) description
Hardware description of Flexi Pole Installation Kit (FPIA) 471767A.
Figure 17
Flexi Pole Installation Kit (FPIA)
Flexi Pole Installation Kit (FPIA) consists of an installation plate, straining strap and four
screws. It is used for installing the following auxiliary units onto a pole:
•
•
•
•
•
•
Flexi System External Alarm (FSEB)
Flexi System External OVP (FSES)
Flexi System External OVP (FSEP)
Flexi System External GPS Mediator (FSEG)
Flexi GPS Surge Protection Kit (FYEA)
Outdoor GNSS receiver (FYGM)
Pole sizes between 60 mm (2.4 in.) and 160 mm (6.3 in.) in diameter are supported. The
FPIA can be installed either horizontally or vertically.
There are two sets of fixing points on the installation plate. The FPIA can carry the
weight of 5 kg (11 lb).
For the FPIA delivery contents, see Contents of the Flexi Pole Installation Kit (FPIA)
delivery in Installing Nokia Base Station Optional Items.
DN09142347 Issue: 07
© 2017 Nokia
41
Flexi Mounting Auxiliary Bracket (FMAA) description
Nokia Base Station Optional Items Description
11 Flexi Mounting Auxiliary Bracket (FMAA)
description
Hardware description of Flexi Mounting Auxiliary Bracket (FMAA) 471657A.
Figure 18
Flexi Mounting Auxiliary Bracket (FMAA)
Springwasher
Flexi Mounting Auxiliary Bracket (FMAA) can be used for pole, wall, and stack
installations of auxiliary boxes (FSEB, FSES, FSEP, FSEG, or FYEA). The FMAA must
be installed on top of a casing. It cannot be installed as a stand-alone part.
The FMAA is mounted to the top casing in horizontal stacks and the outer casing in
vertical installations. The auxiliary boxes are then mounted to the FMAA based on their
own installation principles. There is enough space for a maximum of one FSES/FSEP
box and one FSEB box, or two FSES/FSEP boxes. The FMAA weighs 0.9 kg (1.98 lb).
For the FMAA delivery contents, see Contents of the Flexi Mounting Auxiliary Bracket
(FMAA) delivery in Installing Nokia Base Station Optional Items.
For installation instructions, see Installing Flexi Mounting Auxiliary Brackets (FMAA) in
Installing Nokia Base Station Optional Items.
42
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Flexi Mounting Covers for Back and Front
(FMCA/FMCH/FMCB) description
12 Flexi Mounting Covers for Back and Front
(FMCA/FMCH/FMCB) description
Hardware desciption of Flexi Mounting Covers for Back and Front 3U (FMCA) 470239A,
Flexi 3U High Covers Mounting Covers Front/back (FMCH) 473186A, and Flexi
Mounting Covers for Back and Front 2U (FMCB) 470332A and the grounding cable
included in the delivery.
Figure 19
Flexi Mounting Covers for Back and Front 3U (FMCA)
Frontcover
Backcover
2xcableentry
2xmaintenancestrap
Groundingcable
Flexi Mounting Covers for Back and Front are optional 3U (FMCA/FMCH) and 2U
(FMCB) module covers that are required in installations without a cabinet. The covers
are necessary for visual purposes and provide mechanical protection for the cables.
Furthermore, the back cover protects the installer's fingers from the rotating fans. The
FMCH front cover is 3 cm (1.18 in.) longer than the FMCA and thereby provides more
room for cables than the FMCA front cover.
For the FMCA delivery contents, see Contents of the Flexi Mounting Covers for Back
and Front 3U (FMCA) delivery in Installing Nokia Base Station Optional Items.
For the FMCH delivery contents, see Contents of the Flexi 3U High Covers Mounting
Covers Front/back (FMCH) delivery in Installing Nokia Base Station Optional Items.
For the FMCB delivery contents, see Contents of the Flexi Mounting Covers for Back
and Front 2U (FMCB) delivery in Installing Nokia Base Station Optional Items.
For installation instructions, see Installing Flexi Mounting Covers (FMCA/FMCH/FMCB)
back and Installing Flexi Mounting Covers (FMCA/FMCH/FMCB) front in Installing Nokia
Base Station Optional Items.
The FMCA/FMCH/FMCB deliveries include a grounding cable. Note that a grounding
cable is not included in any module deliveries.
DN09142347 Issue: 07
© 2017 Nokia
43
Flexi Mounting Covers for Back and Front
(FMCA/FMCH/FMCB) description
Table 7
Nokia Base Station Optional Items Description
Grounding cable
Property
Value
Length
1.3 m (4.3 ft)
Thickness
16 mm2 (5 AWG)
12.1 Flexi Mounting Covers for Back and Front 3U
(FMCA) dimensions
Dimensions of Flexi Mounting Covers for Back and Front 3U (FMCA) 470239A.
Table 8
FMCA dimensions
Property
Front cover
Back cover
Height
128 mm (5 in.)
128 mm (5 in.)
Width
492 mm (19.4 in.)
446 mm (17.6 in.)
Depth
100 mm (3.9 in.)
37 mm (1.5 in.)
12.2 Flexi 3U High Covers Mounting Covers Front/back
(FMCH) dimensions
Dimensions of Flexi 3U High Covers Mounting Covers Front/back (FMCH) 473186A.
The FMCH front cover is 3 cm (1.18 in.) longer than the FMCA and thereby provides
more room for cables than the FMCA front cover.
Table 9
FMCH dimensions
Property
Front cover
Back cover
Height
159 mm (6.26 in.)
128 mm (5 in.)
Width
492 mm (19.4 in.)
446 mm (17.6 in.)
Depth
127 mm (5 in.)
37 mm (1.5 in.)
12.3 Flexi Mounting Covers for Back and Front 2U
(FMCB) dimensions
Dimensions of Flexi Mounting Covers for Back and Front 2U (FMCB) 470332A.
Table 10
FMCB dimensions
Property
Height
44
Front cover
83 mm (3.3 in.)
© 2017 Nokia
Back cover
83 mm (3.3 in.)
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 10
FMCB dimensions (Cont.)
Property
DN09142347 Issue: 07
Flexi Mounting Covers for Back and Front
(FMCA/FMCH/FMCB) description
Front cover
Back cover
Width
492 mm (19.4 in.)
446 mm (17.6 in.)
Depth
100 mm (3.9 in.)
37 mm (1.5 in.)
© 2017 Nokia
45
Flexi Module Casing (EMHA/EMHH/EMTA) description
Nokia Base Station Optional Items Description
13 Flexi Module Casing (EMHA/EMHH/EMTA)
description
Hardware description of Flexi Module Casings EMHA (470316A), EMHH (473187A), and
EMTA (470315A) and related optional Flexi Side Covers FMHA (471524A) and FMTA
(471523A).
Flexi Module Casings
The following Flexi Module Casings are available:
•
•
•
Flexi Module Casing (EMHA) for 3 height units (3U) 470316A
Flexi 3U Casing and High Covers F&B (EMHH) 473187A
Flexi Module Casing (EMTA) for 2 height units (2U) 470315A
Figure 20
46
Flexi Module Casing (EMHA)
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Flexi Module Casing (EMHA/EMHH/EMTA) description
Figure 21
Flexi 3U Casing and High Covers F&B (EMHH)
Figure 22
Flexi Module Casing (EMTA)
Optional Flexi Module Casing (EMHA/EMHH/EMTA) is used to fix the modules to the
floor, wall, or pole. Module casings enable module replacement without the need to
completely dismantle the BTS installation and ensure environmental protection against
different environments. There are both 3U and 2U casings available. The EMHH kit
DN09142347 Issue: 07
© 2017 Nokia
47
Flexi Module Casing (EMHA/EMHH/EMTA) description
Nokia Base Station Optional Items Description
comes with an extended front cover and cable entries to provide more room for cables.
6TX 360 W RF Module deliveries include a stress relief corpus which offers support and
helps routing heavy DC cables. The stress relief corpus is compatible with the EMHH kit.
Figure 23
Stress relief corpus
cableclamp
strainreliefcorpus
For the EMHA delivery contents, see Contents of the Flexi Module Casing (EMHA) for 3
height units (3U) delivery in Installing Nokia Base Station Optional Items.
For the EMHH delivery contents, see Contents of the Flexi 3U Casing and High Covers
F&B (EMHH) delivery in Installing Nokia Base Station Optional Items.
For the EMTA delivery contents, see Contents of the Flexi Module Casing (EMTA) for 2
height units (2U) delivery in Installing Nokia Base Station Optional Items.
Optional Flexi Side Covers
The following optional Flexi Side Cover kits are available (to be ordered separately):
•
•
Flexi Side Covers (FMHA) for 3 height units (3U) 471524A
Flexi Side Covers (FMTA) for 2 height units (2U) 471523A
Flexi Side Covers are available as an optional item. Their primary functions are visual
protection and mechanical protection for the cables. They are recommended whenever it
is necessary to protect cabling from birds or rodents. Side covers are not required for
weather protection. The FMHA and FMTA are presented in Figure 24: Flexi Side Covers
(FMHA) and Figure 25: Flexi Side Covers (FMTA).
g
48
Note: Flexi Side Covers (FMHA) are not compatible with Flexi 3U Casing and High
Covers F&B (EMHH).
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Flexi Module Casing (EMHA/EMHH/EMTA) description
Figure 24
Flexi Side Covers (FMHA)
Figure 25
Flexi Side Covers (FMTA)
For the FMHA and FMTA delivery contents, see Contents of the Flexi Side Covers
(FMHA) for 3 height units (3U) deliveryand Contents of the Flexi Side Covers (FMTA) for
2 height units (2U) delivery in Installing Nokia Base Station Optional Items.
DN09142347 Issue: 07
© 2017 Nokia
49
Flexi Module Casing (EMHA/EMHH/EMTA) description
Nokia Base Station Optional Items Description
For installation instructions, see Installing Flexi Side Covers in Installing Nokia Base
Station Optional Items.
For more information, see Appendix Casing and cover kits need for Flexi Multiradio units.
13.1 Flexi Module Casing (EMHA) dimensions and
weight
Dimensions and weight of Flexi Module Casing (EMHA) for 3 height units (3U) 470316A.
Table 11
EMHA dimensions and weight
Property
Value
Height with covers
133 mm (5.2 in.)
Height without covers
128.5 mm (5.1 in.)
Width with covers
492 mm (19.4 in.)
Width without covers
439 mm (17.3 in.)
Depth with covers
560 mm (22.1 in.)
Depth without covers
423.5 mm (16.7 in.)
Weight
3.7 kg (8.2 lb)
13.2 Flexi 3U Casing and High Covers F&B (EMHH)
dimensions and weight
Dimensions and weight of Flexi 3U Casing and High Covers F&B (EMHH) 473187A.
The EMHH kit includes a FMCH cover kit, the front cover of which is 3 cm (1.18 in.)
longer than the FMCA and thereby provides more room for cables than the FMCA front
cover.
Table 12
EMHH dimensions and weight (covers excluded)
Property
Value
Heigh
133 mm (5.2 in.)
Width
492 mm (19.4 in.)
Depth
560 mm (22.1 in.)
Weight
3.7 kg (8.2 lb)
13.3 Flexi Module Casing (EMTA) for 2 height units (2U)
dimensions and weight
Dimensions and weight of Flexi Module Casing (EMTA) for 2 height units (2U) 470315A.
50
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 13
Flexi Module Casing (EMHA/EMHH/EMTA) description
EMTA dimensions and weight (covers excluded)
Property
DN09142347 Issue: 07
Value
Height
90 mm (3.5 in.)
Width
492 mm (19.4 in.)
Depth
560 mm (22.1 in.)
Weight
3.2 kg (7 lb)
© 2017 Nokia
51
Flexi 3U Face Down Casing Pole & Wall (EMHD)
description
Nokia Base Station Optional Items Description
14 Flexi 3U Face Down Casing Pole & Wall
(EMHD) description
Hardware description and installation options of Flexi 3U Face Down Casing Pole & Wall
(EMHD) 473583A.
Figure 26
Flexi 3U face down casing pole & wall (EMHD)
Flexi 3U Face Down Casing Pole & Wall (EMHD) 473583A is a 3U casing that allows for
installing the RF Modules front panels facing down. Cables are routed down as in
Remote Radio Head installations, which supports the use of straight connectors. The
EMHD consists of a frame assembly and a casing, and there is no need to use Flexi
Mounting Covers (FMCA). Air flow is from top to bottom.
The following installation options are supported (max. two EMHDs stacked):
•
•
g
Wall installation with an FMFA
Pole installation using FMFA with FPKA/FPKC (up to four EMHDs)
Note: The maximum weight of the RF Module to be installed inside an EMHD is 25 kg
(55.12 lb).
The EMHD site bag consists of:
•
•
•
•
•
•
•
•
•
52
EMHD 473583A
FSES/FSEP cover
Two DC cable clamps
24 pieces of M5x12 screws (TX25)
Two fixing plates
One fixing plate for casing
Two fixing corners
One grounding plate
Two FBBx side fixing in EMHD
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Figure 27
Flexi 3U Face Down Casing Pole & Wall (EMHD)
description
EMHD delivery contents
EMHD
2pcsFBBxside
FSEP/FSEScover
24pcsM5x12screws(TX25)
2pcsDCcableclamps
1pcfixing
2pcsfixingplates
2pcsfixingcorners
groundingplate
plateforcasing
fixingplates
X24
14.1 Flexi 3U Face Down Casing Pole & Wall (EMHD)
dimensions and weight
Dimensions and weight of Flexi 3U Face Down Casing Pole & Wall (EMHD) 473583A.
Table 14
EMHD dimensions and weight
Property
DN09142347 Issue: 07
Value
Height
650 mm (25.6 in.)
Width
530 mm (20.9 in.)
Depth
155 mm (6.1 in.)
Weight
9.2 kg (20.3 lb)
© 2017 Nokia
53
Flexi Power Module (FPMA) and submodules (FPAA
and FPBB) description
Nokia Base Station Optional Items Description
15 Flexi Power Module (FPMA) and submodules
(FPAA and FPBB) description
Hardware description of Flexi Power Module (FPMA) 470139A and its submodules Flexi
Power AC/DC sub-module 200-240 V AC (FPAA) 470140A and Flexi Power Battery
submodule (FPBB) 472113A.
Figure 28
Flexi Power Module (FPMA)
Typelabel
Figure 29
Flexi Power Module (FPMA) with a full configuration of two FPAAs and two
FPBBs
15.1 Flexi Power Module (FPMA) and submodules (FPAA
and FPBB) operation
Operation and installation considerations for Flexi Power Module (FPMA) 470139A and
its submodules Flexi Power AC/DC submodule 200-240 V AC (FPAA) 470140A and
Flexi Power Battery submodule (FPBB) 472113A.
54
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Flexi Power Module (FPMA) and submodules (FPAA
and FPBB) description
Flexi Power Module (FPMA) is an optional module consisting of FPMA mechanics and
AC and DC interfaces. It takes up to four submodules (Flexi Power AC/DC sub-module
200-240 V AC (FPAA) and Flexi Power Battery submodule (FPBB)), which can be
chained together with an alarm cable. The submodules are hot pluggable for easy and
quick installation.
For the FPMA delivery contents, see Contents of the Flexi Power Module (FPMA)
delivery in Installing Nokia Base Station Optional Items.
For installation instructions, see Installing Flexi Power Module (FPMA) in the Installing
Nokia Base Station Optional Items document.
The FPMA can support 1-phase and 3-phase AC input. The nominal input voltage is
200-240 V AC (the operating voltage range is 180-276 V AC). The maximum output
power from the FPMA is 4 kW (with 4 FPAAs). There are the following AC connection
alternatives:
•
•
•
•
Single phase connection 230 V AC
3-phase star connection 230 V AC
3-phase delta connection, base voltage 100-120 V AC
3-phase delta connection 110 V AC
Flexi Power Module version 470139A.204 provides support for parallel operation of two
FPMA modules in stack installations as well as provision for optional Surge Protection
Device (SPD) installation inside the AC connection box. The AC SPD is installed on a
DIN rail. Surge Protection Devices are recommended for outdoor conditions.
DC OVP is needed when the FPMA is driving feeder cables longer than 10 m (32.8 ft).
For (n+1) redundancy, it is necessary to have an extra FPAA provided. Ensure that the
total DC power load cannot exceed the maximum output power of the installed batteries.
For battery back-up times, see Flexi Power Module (FPMA) battery backup times in the
Nokia Base Station Installation Site Requirements document. For cable and AC fuse
requirements, see Flexi Power Module (FPMA) AC wiring and fuse requirements in the
Nokia Base Station Installation Site Requirements document.
The FPMA supports two alarms (daisy-chained between all modules):
•
•
AC failure alarm
Module alarm (maintenance needed)
The alarm cable delivered with the FPMA is connected to the LMP port of the System
Module (FSMF). Alternatively, it is possible to use the FSMF EAC interface to free up the
the FSMF LMP port using either a Flexi System External Alarm (FSEB) and an HDMID37 EAC cable FTSI (472578A), or an IP-protected jumper box and a FTSI cable.
Figure 30
FPMA alarm options
possibleoptions
LMP+PWRalarm(default)
FPAA
AC
FPAA
FPAA
FPAA
DC
power
alarms
options
472578A
FSMF
(default)
EAC
FTSIcable
FSMF
IP protected
EAC
jumper
FTSIcable
box
FSMF
FSEB
Flexi Power AC/DC sub-module (FPAA)
DN09142347 Issue: 07
© 2017 Nokia
55
Flexi Power Module (FPMA) and submodules (FPAA
and FPBB) description
Nokia Base Station Optional Items Description
The main function of the FPAA is to provide the BTS with nominal 48 V DC power from
an AC supply. Maximum DC output power of one FPAA module is 1000 W 55V DC. A
nominal 48 V DC supply is intended for BTS internal use only (a nominal 48 V DC supply
is not intended for third-party equipment because they might require lower conducted
emission level than EN55022 Class A). The FPAA includes its own integrated selfcontrolled fan. In case the fan fails, an alarm is generated and the FPAA has to be
replaced (the fan alone cannot be replaced).
Flexi Multiradio AC/DC sub-module FPAA version 470140A.204 provides higher
efficiency than FPAA version 470140A.101 – 102. Typical efficiency of FPAA version
470140A.204 is 95% @ 230VAC with the 40–90% load.
Fan air flow direction of FPAA version 470140A.204 can be changed from back-to-front
(factory default) to front-to-back in case when FPAA and FPMA is installed to a thirdparty cabinet.
FPAA version 470140A.204 dust protection level has been increased from IP55 to IP65.
f
CAUTION! Risk of equipment damage.
Risk of thermal runaway of the battery, because temperature compensation of charging
voltage is not supported. Do not connect an external lead acid battery for longer backup
times to a nominal 48 V DC supply.
The FPAA unit remembers the main control switch position. If the FPAA power is
switched to Standby, the power remains OFF after input voltage interrupt.
The standby switch is used for switching the FPAA unit ON/Standby when AC input
voltage has been connected to the FPAA unit.
For the FPAA delivery contents, see Contents of the Flexi Power AC/DC submodule 200240 V AC (FPAA) delivery in Installing Nokia Base Station Optional Items.
Flexi Power Battery submodule (FPBB)
The Flexi Power Battery submodule (FPBB) is a separate optional submodule used
together with the FPAA.
The FPBB provides short-term battery backup time when the AC power mains is down
on a Flexi BTS site and has initial 3 Ah capacity. It is a Lithium Ferrite battery. The
maximum DC output power from one FPBB module is 1000 W (max. 30 A) and the
operating voltage range is 59…38 V. The input power for the BTS cannot exceed the
maximum output power of the installed batteries. Otherwise the batteries do not provide
the BTS with the needed power during power failure. Discharge cut-off voltage is 38 V.
The power switch of the FPBB unit controls input power. Batteries can be drained by the
BTS if the power switch is set to the OFF position.
The standby switch is used for switching the FPBB unit ON/Standby when AC input
voltage has been connected to the FPBB unit.
For the FPBB delivery contents, see Contents of the Flexi Power Battery submodule
(FPBB) delivery in Installing Nokia Base Station Optional Items.
Lightning protection requirements
•
•
56
+/- 2 kV, 1.2/50 µs pulse, Rs=(2 Ω + 10 Ω) (line to ground, common)
+/- 1 kV, 1.2/50 µs pulse, Rs=2 Ω (line to line, differential)
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
•
Flexi Power Module (FPMA) and submodules (FPAA
and FPBB) description
+/- 6 kV, 1.2/50 µs pulse, Rs=2 Ω (each phase conductor to green-wire ground or
neutral conductor, neutral conductor and green-wire ground)
Number of FPAA and FPBB submodules required
If there are battery submodules (FPBB) in the configuration, their number has to be
equal to or greater than the number of AC/DC submodules (FPAA). See Table 15:
Examples of FPAA and FPBB submodules required in a configuration for details.
Table 15
Examples of FPAA and FPBB submodules required in a configuration
DC power
Number of FPMAs
Number of FPAAs
Number of FPBBs
1000 W
1
1
0
1000 W
1
1
1
1000 W
1
1
2
1000 W
1
1
3
1000 W
1
2
2
3000 W
1
3
0
3000 W
2
3
3
3000 W
2
3
4
4000 W
1
4
0
4000 W
2
4
4
Battery backup times
For estimated typical battery backup times, see Flexi Power Module (FPMA) battery
backup times in the Nokia Base Station Installation Site Requirements document.
15.2 Flexi Power Module (FPMA) dimensions and weight
Dimensions and weight for Flexi Power Module (FPMA) 470139A.
Table 16
FPMA dimensions and weight
Property
Value
Height
133 mm/3U (5.2 in.)
Width
447 mm (17.6 in.)
Depth without covers
422 mm (16.6 in.)
Depth with covers
560 mm (22.1 in.)
Weight (empty)
7.3 kg (16 lb)
Weight
Fully equipped with one AC/DC power module
and batteries: 22.4 kg (49.4 lb)
FPAA (Efore): 2.5 kg (5.5 lb)
FPAA (AcBel): 3.4 kg (7.5 lb)
DN09142347 Issue: 07
© 2017 Nokia
57
Flexi Power Module (FPMA) and submodules (FPAA
and FPBB) description
Table 16
Nokia Base Station Optional Items Description
FPMA dimensions and weight (Cont.)
Property
Value
FPBB: 4.1 kg (9.0 lb)
15.3 Flexi Power Module (FPMA) and submodule (FPAA
and FPBB) interfaces
External interfaces and DC cables of Flexi Power Module (FPMA) 470139A and its
submodules Flexi Power AC/DC submodule 200-240 V AC (FPAA) 470140A and Flexi
Power Battery submodule (FPBB) 472113A.
Flexi Power Module (FPMA) front panel connectors
Table 17
FPMA front panel connectors, types, and purposes
Connector
Type
Purpose
Power supply in
Terminal block
AC main power supply in
Power supply out
4 x Mate-N-Lock
AC output for FPAA(s)
Grounding
2 x M5
Module grounding
Table 18
FPMA DC cables
Connector
DC output cables
Type
4 x multi-beam
Purpose
DC feed for BTS
2 x bolt teminal
DC cables
2 x cable shoe
DC feed for BTS
2 x open end
Flexi Power AC/DC submodule (FPAA) front panel connectors
There is a standby switch on the front panel of the FPAA. The standby switch is used for
switching the FPAA unit ON/standby.
Table 19
FPAA front panel connectors, types, and purposes
Connector
Type
Purpose
AC cable connector
Mate-N-Lock
AC input
DC connector
Multi-beam power supply
connector
DC output
Alarm connector
2 x RJ-45*
Alarms**
Operational state visual
indication
Tri-color LED
FPAA state or alarm indication
*For chaining
58
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Flexi Power Module (FPMA) and submodules (FPAA
and FPBB) description
**Alarm 1 (AL01): AC input failure (alarm is sent when AC input voltage is missing or it is
out of range).
**Alarm 2 (AL02): maintenance needed (possible reasons are unit failure, cooling fan
failure, output power is low or over temperature shut down is ON).
See Table 20: FPAA and FPBB alarm interface pin map for for the alarm interface pin
map.
Table 20
FPAA and FPBB alarm interface pin map
Pin
Signal
1
N/C internally
2
N/C internally
3
N/C internally
4
ALO1 *)
5
ALO2**)
6
N/C internally
7
GND
8
N/C internally
AL01 and ALO2 have an active low polarity and are referenced to the GND connector
pin. They are self-biased with 5 V level.
•
•
Normal open = no alarm = 5 V level
Closed = alarm active = 0 V level
Flexi Power Battery submodule (FPBB) front panel connectors
There is a standby switch on the front panel of the FPBB.
Table 21
FPBB front panel connectors, types, and purposes
Connector
Type
Purpose
DC input/output connector
Multi-beam power supply
connector
DC input and output
Alarm connector
2 x RJ-45*
Alarms**
Operational state visual
indication
Tri-color LED
FPBB state or alarm indication
*For chaining
**Alarm 2 (AL02): maintenance needed (possible reasons are unit failure, output power
is low or unit has reached end of its life).
**Unit has an input for Alarm 1 (AL01) from FPAA (Alarm 1 is a trigger for battery
discharging).
See Table 20: FPAA and FPBB alarm interface pin map for for the alarm interface pin
map.
DN09142347 Issue: 07
© 2017 Nokia
59
Flexi Power Module (FPMA) and submodules (FPAA
and FPBB) description
Nokia Base Station Optional Items Description
15.4 Flexi Power Submodule (FPAA and FPBB) LED
indications
LED indications visible on Flexi Power Module (FPMA) and its submodules: Flexi Power
AC/DC Submodule 200-240 V AC (FPAA) 470140A and Flexi Power Battery Submodule
(FPBB) 472113A.
Flexi Power Module AC/DC Submodule (FPAA) LED indications
When pressing the manual standby/ON switch, the unit is turned into standby mode and
DC power generation is disabled.
The FPAA LED indications are explained in Table 22: FPAA LED indications. Read the
information on LED indications thoroughly. A blinking red LED does not always require
removing the module.
Table 22
FPAA LED indications
LED color
Description
Alarm
Yellow, stable
Standby (AC connected)
No
Green, stable
Normal operation
No
Red, stable
Alarm or fault
ALO1 or ALO2
Red, blinking
Unit operating with abnormal
input voltage
ALO1
See Figure 31: FPAA LED for the location of the FPAA LED.
Figure 31
FPAA LED
LED
FPBB LED indications
60
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Flexi Power Module (FPMA) and submodules (FPAA
and FPBB) description
When pressing the manual standby/ON switch, the unit is turned into standby mode and
discharging is disabled. Forced discharge mode is entered by pressing the standby
switch for five seconds. In this state, the LED blinks fast between green and yellow.
Pressing the switch again returns the unit to the normal state and the LED becomes
green.
The FPBB LED indications are explained in Table 23: Flexi Power Battery Submodule
(FPBB) LED indications.
Table 23
Flexi Power Battery Submodule (FPBB) LED indications
LED color
Description
Alarm
Yellow, stable
Standby (DC connected from
FPAA)
No
Green, stable
Normal operation, battery OK
No
Green, slowly blinking
Charging
No
Green, fast blinking
Discharging
No
Red, stable
Major alarm or fault
No
Red, fast blinking
Minor alarm
ALO2
Blinking fast between green
and yellow
Forced discharge mode
No
The LED's slow blinking frequency is 1 Hz (1 sec.) and fast blinking frequency 2 Hz (0.5
sec.).
See Figure 32: FPBB LED for the location of the FPBB LED.
Figure 32
FPBB LED
LED
DN09142347 Issue: 07
© 2017 Nokia
61
Slotpack AC/ DC power solution for FCOB
Nokia Base Station Optional Items Description
16 Slotpack AC/ DC power solution for FCOB
Hardware description of the Slotpack AC/ DC power solution for FCOB (CS7182021).
Figure 33
Slotpack AC/ DC power solution for FCOB
16.1 Slotpack AC/DC power solution for FCOB operation
Operation considerations for Slotpack AC/DC power solution for FCOB CS7182021.
Slotpack AC/DC power solution is a stand-alone 5.4 kW/48 VDC rectifier system
prepared for integration into 1U/19” slot. Its AC input range is 100 - 250 V AC with typical
efficiency of > 95% at 25% - 80% load. The Smartpack S control unit offers easy control
and comprehensive monitoring of the power system.
All the building blocks combined make it an effective and safe power system, suitable for
a wide range of indoor and outdoor applications.
This power system consists of:
•
•
•
•
Smartpack S controller
Up to three 1800 W rectifiers for total power of 5.4 kW
Battery breaker: 1 x 80 A with LVBD
Load breakers: 1 x 60 A, 2 x 80 A
16.2 Slotpack AC/DC power solution for FCOB
dimensions and weight
Dimensions and weight of the Slotpack AC/DC power solution for FCOB CS7182021.
Table 24
Slotpack AC/DC power solution dimensions and weight
Property
62
Value
Height
44.5 mm (1.75 in.)
Depth
262 mm (10.3 in.)
Width
482 mm (19 in.)
Weight
5.2 kg (11.5 lb)
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Slotpack AC/ DC power solution for FCOB
16.3 Slotpack AC/DC power solution for FCOB
interfaces
External interfaces of the Slotpack AC/DC power solution CS7182021.
Interfaces in the Slotpack AC/DC power solution
ACFeed1
ACFeed2
ACFeed3
Figure 34
Connect!AC!Mains!and “PE”
Earth!cables
Max.!4.0!mm2 (10AWG)
CAN!port
(With!End-of-Line-Resistor)
PE
For!cable!fastening
Correct
Polarity
Connect
Load!cables
Max.!25!mm2 (2AWG)
Battery!Bank!1
Connect!Battery
cables!to!system!terminals
Max.!25!mm2 (2AWG)
Link2!(TE!-!!!!!)
DC!Earth
For!cable!fastening
CAN!port
(With!End-of-Line-Resistor)
DN09142347 Issue: 07
© 2017 Nokia
63
Slotpack AC/ DC power solution for FCOB
Table 25
Nokia Base Station Optional Items Description
Slotpack AC/DC power solution interfaces
Property
Mains feed interface
Value
1 phase 230 V AC or 3 phase(Δ) 230/400 V
AC, 3 phase (Y)
Max. 4 mm2 (AWG12)
Battery distribution
1 x 80 A, max. 25 mm2 (2AWG)
M6 cable lug
Load distribution
1x 60 A, 2 x 80 A, max. 25 mm2 (2 AWG)
M6 cable lug
Inputs/Outputs
6 x digital inputs, max. 0.5 mm2 (20 AWG),
spring terminals
6 x relay alarm outputs, max. 0.5 mm2 (20
AWG), spring terminals
Serial port (RS-232 or RS-485 connect)
RJ-11, 6 pins
Ethernet port
RJ-45, 8 pins
10/100 BASE-T HP
Auto MDI/MDI-X
The Enter or Left arrow key
When entering numbers, a short press of this
key navigates to the left
A long press of this key to enter and save data
The Cancel or Right arrow key
When entering numbers, a short press of this
key navigates to the right
A long press of this key to cancel or abort data
The Up and Down arrow keys
To navigate up or downwards the menu icons,
point at options and increase and decrease
values
16.4 Slotpack AC/DC power solution for FCOB LED
indications
LED indications visible on the Slotpack AC/DC power solution for FCOB CS7182021.
The Slotpack solution has placed LED indicators in Smartpack as well as in the
Rectifiers part of the set. LED indications in the Smartpack help to operate the DC power
system from the controller’s front panel.
64
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 26
Slotpack AC/ DC power solution for FCOB
Slotpack's LED indications in the Rectifiers part
LED color
Red, alarm
Description
Alarms:
Yellow, warning
•
Low / high input voltage shutdown
•
High / low temperature shutdown
•
Rectifier Failure
•
Overvoltage shutdown on output
•
Fan failure
•
Low output voltage alarm
•
CAN bus failure
Warnings:
•
Rectifier in power de-rate mode
•
Remote output current limit activated
•
Input voltage out of range, flashing at
overvoltage
Loss of CAN communication with controller
•
Green
Table 27
Normal operation
Slotpack's LED indications in the Smartpack part
LED color
Green
Description
The controller has NO supply
Power: OFF
The supply is healthy
Power: ON
Green
No Warning
Warning: OFF
Warning (Minor alarm, Non-critical alarm)
Warning: ON
Green
No Alarm
Alarm: OFF
Alarm (Major alarm, Critical Alarm)
Alarm: ON
DN09142347 Issue: 07
© 2017 Nokia
65
Flexi Power DC/DC Module (FPDA) description
Nokia Base Station Optional Items Description
17 Flexi Power DC/DC Module (FPDA)
description
Hardware description of Flexi Power DC/DC Module (FPDA) 470067A.
Figure 35
Flexi Power DC/DC Module (FPDA)
17.1 Flexi Power DC/DC Module (FPDA) operation
Operation considerations for Flexi Power DC/DC Module (FPDA) 470067A.
Flexi Power DC/DC Module (FPDA) is an optional stand-alone 2 kW DC/DC module.
The FPDA converts nominal 24 V DC input voltage (normally negative grounded) 53-55
V DC output voltage. The 53-55 V DC is then distributed to BTS loads. When the BTS
power load is more than 2 kW, multiple FPDAs can be installed in parallel. When FPDAs
are used in parallel, a maximum of two DC cables can be installed together at each
output terminal.
Conducted emission level of the 53-55 V DC supply is according to the standard
EN55022 Class A. The 53-55 V DC supply is intended for BTS internal use only (the 5355 V DC supply is not intended for third-party equipment because they might require
lower conducted emission level than EN55022 Class A).
f
CAUTION! Risk of equipment damage.
Risk of thermal runaway of the battery, because temperature compensation of charging
voltage is not supported.
Do not connect an external lead acid battery for longer backup times to the 53-55 V DC
supply.
The FPDA includes its own integrated self-controlled fan. In case the fan fails, an alarm
is generated and the fan has to be replaced.
For the FPDA delivery contents, see Contents of the Flexi Power DC/DC Module (FPDA)
delivery in Installing Nokia Base Station Optional Items.
66
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Flexi Power DC/DC Module (FPDA) description
For installation instructions, see Installing Flexi Power DC/DC Module (FPDA) in the
Installing Nokia Base Station Optional Items document.
17.2 Flexi Power DC/DC Module (FPDA) dimensions and
weight
Dimensions and weight of Flexi Power DC/DC Module (FPDA) 470067A.
Table 28
FPDA dimensions and weight
Property
Value
Height
90 mm/2U (3.5 in.)
Width
447 mm (17.6 in.)
Depth without covers
422 mm (16.6 in.)
Depth with covers
560 mm (22.1 in.)
Weight
< 15 kg (< 33.1 lb)
17.3 Flexi Power DC/DC Module (FPDA) interfaces
External interfaces of Flexi Power DC/DC Module (FPDA) 470067A.
There is a standby switch on the front panel of the FPDA.
Table 29
FPDA front panel connectors, connector types, and purposes
Connector
Connector type
Purpose
Input connector
M10 bolts
DC input
Output connector
M10 bolts
DC output
Alarm connectors
2 x RJ-45*
Alarms**
*For chaining
**Alarm 1 (AL01): DC input failure (alarm is sent when DC input voltage is missing or it is
out of range).
**Alarm 2 (AL02): maintenance needed (possible reasons are unit failure, cooling fan
failure, output power is low or over temperature shut down is ON).
AL01 and ALO2 have an active low polarity and are referenced to the GND connector
pin. They are self-biased with 5 V level.
•
•
Normal open = no alarm = 5 V level
Closed = alarm active = 0 V level
The FPDA front panel is presented in Figure 36: FPDA front panel.
DN09142347 Issue: 07
© 2017 Nokia
67
Flexi Power DC/DC Module (FPDA) description
Figure 36
Nokia Base Station Optional Items Description
FPDA front panel
DCInputcabling
Alarmcabling
DCOutputcabling
LED
GND
17.4 Flexi Power DC/DC Module (FPDA) LED indications
LED indications visible on the Flexi Power DC/DC Module (FPDA) 470067A front panel.
Flexi Power DC/DC Module (FPDA) has a tri-color LED on the front panel to indicate the
operational status of the module and all fault conditions during operation. Read the
information on LED indications thoroughly. A blinking red LED does not always require
removing the module. The LED indications of the FPDA are listed and explained in Table
30: FPDA LED indications.
Table 30
FPDA LED indications
LED color
68
Description
Green
Normal operation
Red
Alarm or fault
Yellow
Standby
Red, blinking
Abnormal input voltage
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Flexi Power Rectifier (FPRB) description
18 Flexi Power Rectifier (FPRB) description
Hardware description of Flexi Rectifier Module (FPRB) CS7000030 and the related
rectifiers 2 kW high efficiency Rectifier (CS7000021) and 3 kW high efficiency Rectifier
(CS7000031).
Figure 37
Flexi Power Rectifier (FPRB)
18.1 Flexi Power Rectifier (FPRB) operation
Operation considerations for Flexi Rectifier Module (FPRB) CS7000030 and the related
rectifiers 2 kW high efficiency Rectifier CS7000021 and 3 kW high efficiency Rectifier
CS7000031.
Flexi Rectifier Module (FPRB) is a modular 3U-high AC rectifier solution with output
power scalable up to 9 kW (from 2 kW to 6 kW or from 3 kW to 9 kW). It is made up of up
to three individual rectifiers operating in a parallel mode configuration. It shares the same
dimensions and supports the same mounting options as other 3U-high Flexi modules.
Rated IP65, the FPRB supports stand-alone outdoor installations (wall/pole/stack) when
front and back covers are installed.
The following rectifiers are available for the FRPB:
•
•
2 kW high efficiency Rectifier CS7000021
3 kW high efficiency Rectifier CS7000031
Mixing 2 kW and 3 kW rectifiers inside a single FRPB casing is not allowed. Up to three
FRPBs can be chained to a maximum of 18 kW (using 2 kW modules) or 27 kW (using 3
kW modules).
The FPRB outputs a positive earthed –54VDC (V48N) as a respective BTS operational
supply voltage rail and for site battery charging. It includes a Power Distribution
Assembly (PDA), which has a fully integrated battery protection LVD, load/battery circuit
breakers, battery current shunt and alarm signals to the BTS EAC interface.
DN09142347 Issue: 07
© 2017 Nokia
69
Flexi Power Rectifier (FPRB) description
Nokia Base Station Optional Items Description
18.2 Flexi Power Rectifier (FPRB) dimensions and
weight
Dimensions and weight of Flexi Power Rectifier (FPRB) CS7000030 and the related
rectifiers 2 kW high efficiency Rectifier CS7000021 and 3 kW high efficiency Rectifier
CS7000031.
Table 31
FPRB dimensions and weights
Property
Value
Height
128.7 mm (5.1 in.)
Width
447 mm (17.6 in.)
Depth
395 mm (15.6 in.)
Weight
Fully equipped: appr. 25 kg (55.1 lb)
3U chassis alone: appr. 13 kg (28.7 lb)
Table 32
FPRB rectifier dimensions and weights
Property
Value
Height
100 mm (3.9 in.)
Width
AA25000L-A: 81.8 mm (3.2 in.)
AA27530L: 83 mm (3.3 in.)
Depth
417.1 mm (16.4 in.)
Weight
AA25000L-A: 3.9 kg (8.6 lb)
AA27530L: 4.1 kg (9 lb)
18.3 Flexi Power Rectifier (FPRB) LED indications
LED indications visible on the Flexi Power Rectifier (FPRB) CS7000030 Power
Distribution Assembly (PDA) front panel.
Table 33
FPRB LED indications
LED color
F/MA/Red
M/MA/Yellow
SYSOK/Green
70
Status
ON
ON
ON
© 2017 Nokia
Description
•
Fault
•
Major EAC alarm
•
Mains/phase failure
•
Message
•
Minor EAC alarm
System OK
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 33
Flexi Power Rectifier (FPRB) description
FPRB LED indications (Cont.)
LED color
All LEDs
DN09142347 Issue: 07
Status
Turn on simultaneously and
turn off after about 20 seconds
© 2017 Nokia
Description
System initialization
71
Flexi Power Battery (FPBC) description
Nokia Base Station Optional Items Description
19 Flexi Power Battery (FPBC) description
Hardware description of Flexi Power Battery (FPBC) CS7000052.
Figure 38
Flexi Power Battery (FPBC)
DCPower-51.2V
Address
+ -
LED
Switch
19.1 Flexi Power Battery (FPBC) operation
Operation considerations for Flexi Power Battery (FPBC) CS7000052.
Flexi Power Battery (FPBC) is a Lithium Iron Phosphate (LiFePO4) technology battery
installed inside a Flexi casing. It is used as battery backup on BTS sites when there is a
mains failure. The FPBC is connected to Flexi Power Rectifier (FPRB) at the battery
input circuit breaker. DC output to the BTS equipment is then provided from the FPRB
DC output circuit breaker.
Features
•
•
•
•
•
•
•
•
Energy-efficient Lithium Battery in a Nokia 3U Flexi casing
Can be mounted on a pole, wall or plinth using applicable mounting kits (such as
FMFA or FPKA)
Designed for outdoor use (IP65 rated)
Modular and chainable (up to three units with one FPRB and nine units with three
FPRBs)
Same operating temperatures as for FPRB and System Modules
Filterless
Fast charging (from 0 % to 100 % in 90 minutes)
Long cycle life
Power considerations
Table 34
FPBC power considerations
Property
72
Value
Initial capacity
>30 Ah (Output power 3000 W)
Nominal voltage
52 V
Charge voltage
Maximum -57 V
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 34
Flexi Power Battery (FPBC) description
FPBC power considerations (Cont.)
Property
Value
Max. discharge current
60 A
Discharge cut-off voltage
-42 V
Table 35
FPBC loads and back-up times (new battery pack)
Property
Value
250 W
≥ 360 minutes
500 W
≥ 180 minutes
750 W
≥ 120 minutes
1500 W
≥ 60 minutes
19.2 Flexi Power Battery (FPBC) dimensions and weight
Dimensions and weight of Flexi Power Battery (FPBC) CS7000052.
Table 36
FPBC dimensions and weight
Property
Value
Height
123 mm (4.8 in.)
With Flexi covers: 127.5 mm (5.0 in.)
Width
480 mm (18.9 in.)
With Flexi covers: 490 mm (19.3 in.)
Depth (DC output terminal excluded)
431 mm (17 in.)
With Flexi covers: 521 mm (20.5 in.)
Weight
Appr. 25 kg (55.1 lb)
With Flexi casing and covers: appr. 27.3 kg
(60.2 lb)
19.3 Flexi Power Battery (FPBC) interfaces
External interfaces of Flexi Power Battery (FPBC) CS7000052.
Table 37
FPBC interfaces
Interface
DN09142347 Issue: 07
Name on the HW
Description
RS-485 communication port
RS-485 in
RS-485 Communication input
RS-485 communication port
RS-485 out
RS-485 Communication output
© 2017 Nokia
73
Flexi Power Battery (FPBC) description
Table 37
Nokia Base Station Optional Items Description
FPBC interfaces (Cont.)
Interface
Name on the HW
Description
RJ-45 Terminal
Alarm in
Alarm in port
RJ-45 Terminal
Alarm out
Alarm out port
Address
Address
To set the address for parallel
connection of FPBC
LED
LED
Display the operating status of
the battery
Switch
Switch
For power ON/OFF
DC power connector
DC power -48 V
+ Battery positive connection
port
- Battery negative connection
port
19.4 Flexi Power Battery (FPBC) LED indications
LED indications visible on the Flexi Power Battery (FPBC) CS7000052 front panel.
Table 38
FPBC LED indications
LED color
Alarm on
RJ-45
Fault caused by
Yellow, stable
Standby
No
-
Green, stable
Normal operation,
battery OK
No
-
Green, blinking slowly
Charging
No
-
Green, blinking fast
Discharging
No
-
Red, stable
Major alarm or fault
Yes
•
Assembly fail
•
Assembly end-of-life
•
Assembly not able to supply
enough power
•
Battery over charge
•
Battery over discharge
•
•
Battery temperature out of
range
Cell over temperature
•
Cell over charge/discharge
Red, blinking fast
Blinking fast between
green and yellow
74
Description
Minor alarm
Forced discharge
mode
© 2017 Nokia
Yes
No
-
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Flexi Power AC/DC Submodule 230 V (FPAD)
description
20 Flexi Power AC/DC Submodule 230 V (FPAD)
description
Hardware description of Flexi Power AC/DC Submodule 230 V (FPAD) 472805A.
Figure 39
Flexi Power AC/DC Submodule 230 V (FPAD)
20.1 Flexi Power AC/DC Submodule 230 V (FPAD)
operation
Operation considerations for Flexi Power AC/DC Submodule 230 V (FPAD) 472805A.
Flexi Power AC/DC Submodule 230 V (FPAD) 472805A is a stand-alone 650 W AC/DC
power supply for all Flexi 2TX Remote Radio Heads (RRH). Its AC input range is from
100 to 240 VAC with 55 VDC output. The FPAD is IP65-rated. The typical efficiency of
the FPAD is 94% at 75% load.
There are following installation options for Flexi Power AC/DC Submodule 230 V
(FPAD):
•
•
DN09142347 Issue: 07
Pole installation using Flexi Pole Mounting Kit (FPKA) (FPAD installed between the
pole and RRH).
Pole installation using any commercial fixing brackets. Note that the slot opening for
the commercial fixing brackets (for example, jubilee clips, bands, or clamps) is 8 mm
(0.31 in.). Therefore, the slots support up to 5/16” width clips/bands/clamps.
© 2017 Nokia
75
Flexi Power AC/DC Submodule 230 V (FPAD)
description
f
CAUTION! Risk of personal injury.
Ensure that the selected fixing hardware can sustain the unit under required
circumstances. The selected mounting hardware should be rated for outdoor use and
be capable of securing the unit weight in the environmental conditions specified in
Nokia Base Station Installation Site Requirements.
•
g
Nokia Base Station Optional Items Description
Wall installation (no mounting kit needed).
Note: Flexi Power AC/DC Submodule 230 V (FPAD) must be installed in a vertical
position in order to allow efficient natural convection cooling.
For the FPAD delivery contents, see Contents of the Flexi Power AC/DC Submodule
(FPAD) delivery in Installing Nokia Base Station Optional Items.
For installation instructions, see Installing Flexi Power AC/DC Submodule 230 V
(FPAD/FPAE) in Installing Nokia Base Station Optional Items.
20.2 Flexi Power AC/DC Submodule 230 V (FPAD)
dimensions and weight
Dimensions and weight of Flexi Power AC/DC Submodule 230 V (FPAD) 472805A.
Table 39
FPAD dimensions and weight
Property
Value
Height
300 mm (11.8 in.)
Width
139 mm (5.5 in.)
Depth
75 mm (3.0 in.)
Volume
2.7 l
Weight
3 kg (6.6 lb)
20.3 Flexi Power AC/DC Submodule 230V (FPAD)
interfaces
External interfaces of Flexi Power AC/DC Submodule 230V (FPAD) 472805A.
Table 40
FPAD interfaces
Connector
Connector type
AC input connector
Screw terminal
DC output connector
Open ended DC output cable
DC cable jacket diameter: 6 mm (0.24 in.)
Wire gauge of individual DC wires: 3.3 mm2(12
AWG)
76
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 41
Flexi Power AC/DC Submodule 230 V (FPAD)
description
FPAD AC input connector pin configuration
Pin
AC input cable
1
L = Line
2
N = Neutral
3
PE = Protective Earth
Table 42
FPAD DC output cable
Wire
Color
V48RTN (+)
Black
V48N (-)
Blue
20.4 Flexi Power AC/DC Submodule 230 V (FPAD) LED
indications
LED indications visible on Flexi Power AC/DC Submodule 230 V (FPAD) 472805A.
A multicolored LED is located on the front panel of the FPAD. The LED provides the
following indications:
Table 43
FPAD LED indications
LED color
DN09142347 Issue: 07
Description
Fault caused by
Orange
Standby
N/A
Green
Normal operation
N/A
Red
Fault
No output
© 2017 Nokia
•
Mains break
•
High internal temperature
•
OCP
•
OVP
•
UVP
77
Flexi Power AC/DC Submodule 230 V (FPAE)
description
Nokia Base Station Optional Items Description
21 Flexi Power AC/DC Submodule 230 V (FPAE)
description
Hardware description of Flexi Power AC/DC Submodule 230 V (FPAE) 472953A.
Figure 40
Flexi Power AC/DC Submodule 230 V (FPAE)
21.1 Flexi Power AC/DC Submodule 230 V (FPAE)
operation
Operation considerations for Flexi Power AC/DC Submodule 230 V (FPAE) 472953A.
Flexi Power AC/DC Submodule 230 V (FPAE) 472953A is a stand-alone AC/DC power
supply for Flexi 4TX 40W Remote Radio Heads (RRH) or, for example, Flexi Compact
BTS. It supports the following AC input ranges:
•
•
1150 W (20.9 A @ 55 V) within 110 VAC to 240 VAC (60/50 Hz) input
850 W (15.5 A @ 55 V) within 100 VAC to 110 VAC (60/50 Hz) input
The supported AC input outer diameter range is 8 - 13 mm (0.31 - 0.51 in.).
The typical efficiency of the FPAE is >93% at 75...100% load. It is IP65-rated and has no
fans, so it does not require any maintenance.
There are the following installation options for Flexi Power AC/DC Submodule 230 V
(FPAE):
•
•
f
78
Pole installation behind any Flexi 4TX 40W RRH (FPAE installed between the pole
and RRH).
Pole installation using any commercial fixing brackets. Note that the slot opening for
the commercial fixing brackets (for example, jubilee clips, bands, or clamps) is 15
mm (0.59 in.). Therefore, the slots support up to 13 mm (0.51 in.) width
clips/bands/clamps.
CAUTION! Risk of personal injury.
Ensure that the selected fixing hardware can sustain the unit under required
circumstances. The selected mounting hardware should be rated for outdoor use and
be capable of securing the unit weight in the environmental conditions specified in
Nokia Base Station Installation Site Requirements.
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
•
g
Flexi Power AC/DC Submodule 230 V (FPAE)
description
Wall installation (no mounting kit needed).
Note: Flexi Power AC/DC Submodule 230 V (FPAE) must be installed in a vertical
position in order to allow efficient natural convection cooling.
Figure 41
FPAE in vertical position
For the FPAE delivery contents, see Contents of the Flexi Power AC/DC Submodule 230
V (FPAE) delivery in Installing Nokia Base Station Optional Items.
For installation instructions, see Installing Flexi Power AC/DC Submodule 230 V
(FPAD/FPAE) in Installing Nokia Base Station Optional Items.
21.2 Flexi Power AC/DC Submodule 230 V (FPAE)
dimensions and weight
Dimensions and weight of Flexi Power AC/DC Submodule 230 V (FPAE) 472953A.
Table 44
FPAE dimensions and weight
Property
DN09142347 Issue: 07
Value
Height
300 mm (11.8 in.)
Width
190 mm (7.5 in.)
Depth
78 mm (3.1 in.)
Volume
4.4 l
© 2017 Nokia
79
Flexi Power AC/DC Submodule 230 V (FPAE)
description
Table 44
Nokia Base Station Optional Items Description
FPAE dimensions and weight (Cont.)
Property
Weight
Value
4.7 kg (10.3 lb)
21.3 Flexi Power AC/DC Submodule 230 V (FPAE)
interfaces
External interfaces of Flexi Power AC/DC Submodule 230 V (FPAE) 472953A.
Table 45
FPAE interfaces
Connector
Connector type
AC input connector
Screw terminal
DC output
Open ended DC output cable
DC cable jacket diameter: 14 mm (0.55 in.)
Wire gauge of individual DC wires: 5.26
mm2(10 AWG)
Push-button switch (comes on automatically
when AC power supplied to FPAE)
On/Standby switch
Table 46
FPAE AC input connector pin configuration
Pin
AC input cable
1
L = Line
2
N = Neutral
3
PE = Protective Earth
Table 47
FPAE DC output cable
Wire
Color
V48RTN (+)
Black
V48N (-)
Blue
21.4 Flexi Power AC/DC Submodule 230 V (FPAE) LED
indications
LED indications visible on Flexi Power AC/DC Submodule 230 V (FPAE) 472953A.
A multicolored LED is located on the front panel of the FPAE. The LED provides the
following indications:
80
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 48
Flexi Power AC/DC Submodule 230 V (FPAE)
description
FPAE LED indicationsC
LED color
DN09142347 Issue: 07
Description
Fault caused by
Orange
Standby
N/A
Green
Normal operation
N/A
Red
Fault
No output
© 2017 Nokia
•
Mains break
•
High internal temperature
•
OCP
•
OVP
•
UVP
81
Overview of Flexi Power Distribution Units
Nokia Base Station Optional Items Description
22 Overview of Flexi Power Distribution Units
An overview of Flexi Power Distribution Units (PDU) available for different types of
System Modules.
Table 49
PDU
N/A
Overview of Flexi Power Distribution Units
Compatible
with
ESMB/C
Input
Outputs
Nominal
•
4 x 36 A
-48 V DC
•
•
1 x 5 A additional
power interface
1 x internal output for
direct feeding to
ESMB/C
Nominal
•
3 x 31 A
-48 V DC
•
1 x 25 A
•
1 x internal output for
direct feeding to
FSMC/D/E
•
2 x DC output fixed to
45 A
4 x DC output 45 A,
knob-adjustable to
4A/20A/30A/45A
Flexi Power
Distribution
and Fuses
(FPFB)
FSMC/D/E
Flexi Power
Distribution
and Fuses
Outdoor
(FPFC)
Flexi
Multiradio
BTS
Nominal
Flexi Power
Distribution
Sub-Module
(FPFD)
FSMF
Nominal
Flexi Power
Distribution
and Fuses
Indoor
(FPFI)
Flexi
Multiradio
BTS
-48 V DC
-48 V DC
Nominal
-48 V DC
•
•
•
•
•
•
•
OVP
OVP level
EN61000-4-5
1 kV
Integrated
OVP level
EN61000-4-5
1 kV
Integrated
OVP Class II
Stand(C, T2) surge alone
protection 15
kA in DC input
and 10 kA in
DC outputs
4 x DC output fixed to OVP Level
EN61000-4-5
40 A
1 x internal output for 1 kV
direct feeding to
System Module
3 x 30 A for RF
Modules
2 x 15 A for System
Modules
2 x 10 A for Line
Terminal Equipment
1 x 7.5 A for cabinet
fan with FCOS
installations
Integrated/
Standalone
In-built OVP
Class II (C,
T2) surge
protection (5
kA) in DC
input
Integrated
(optional)
Standalone
22.1 Flexi Power Distribution and Fuses (FPFB)
description
Hardware description of Flexi Power Distribution and Fuses (FPFB) 084175A.
82
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Figure 42
Overview of Flexi Power Distribution Units
Flexi Power Distribution and Fuses (FPFB)
22.1.1 Flexi Power Distribution and Fuses (FPFB) operation
Operation considerations for Flexi Power Distribution and Fuses (FPFB) 084175A.
Flexi Power Distribution and Fuses (FPFB) is a power distribution unit with overcurrent
protection for the outputs. The FPFB distributes nominal -48 V DC, also referred to as
V48N, to System Module, maximum two System Extension Modules, three RF Modules
and two fans, and is compatible with System Module variants FSMB, FSMC, FSMD and
FSME. System Module variant FSMB supports two System Extension Modules, whereas
variants FSMC, FSMD and FSME support one System Extension Module. The FPFB
also includes LEDs for output status indications and operating switches for outputs. The
protection class of the FPFB is IP65.
Flexi Power Distribution and Fuses (FPFB) provides the following functions:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Input power connections on the side of FPFB
Four output connections on the front panel of FPFB
One output connection at the bottom of FPFB
One fan connector for two fans at the back of FPFB
Dedicated membrane switch for every RF Module
Dedicated membrane switch for System Extension Module
Common membrane switch for System Module and fan outputs
Surge protection for input lines
Reverse voltage protection
Over Current Protection (OCP) for outputs 1 - 5
Automatic reset of fuses or overcurrent protections for fan outputs (output 6)
Over Temperature Protection (OTP)
Inrush current limiter
Led indication at the front panel for outputs 1 - 5
Remote output OFF/ON control for outputs 1 - 5 through System Module
22.1.2 Flexi Power Distribution and Fuses (FPFB) dimensions
Dimensions of Flexi Power Distribution and Fuses (FPFB) 084175A.
DN09142347 Issue: 07
© 2017 Nokia
83
Overview of Flexi Power Distribution Units
Table 50
Nokia Base Station Optional Items Description
FPFB dimensions
Property
Value
Width
190 mm (7.48 in.)
Height
48.6 mm (1.91 in.)
Depth
289 mm (11.38 in.)
22.2 Flexi Power Distribution and Fuses Outdoor (FPFC)
description
Hardware description of Flexi Power Distribution and Fuses Outdoor (FPFC) 472508A.
Figure 43
Flexi Power Distribution and Fuses Outdoor (FPFC) (Efore)
FPFC
Inputconnector
IP boot
EACconnector
Inputconnector
On/OffBar
Outputconnector
IP boot
22.2.1 Flexi Power Distribution and Fuses Outdoor (FPFC)
operation
Operation considerations for Flexi Power Distribution and Fuses Outdoor (FPFC)
472508A.
Flexi Power Distribution and Fuses Outdoor (FPFC) is a stand-alone 19-inch wide
outdoor general purpose Power Distribution Unit (PDU) with Class II Over Voltage
Protection and 15 kA protection level in DC input. It feeds DC power to Flexi System
Modules (without the optional FPFD installed), RF Modules, Remote Radio Heads or
microwave (MW) equipment. The FPFC must be positive grounded in order to provide
surge protection for the site.
The FPFC provides six outlets for Flexi Modules (RF Modules or RRHs or System
Module) or any standard -48 V DC device at the site. It can also be used, for example,
up in the tower to divide one main DC line to several RRHs or MW equipment in the
mast. Flexi Power Distribution Outdoor unit includes input, output connectors and output
fuses.
The FPFC can be installed:
84
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
•
•
•
Overview of Flexi Power Distribution Units
outdoors with Flexi Module Casing (EMTA) for 2 height units (2U) 470315A or Flexi
Module Casing (EMHA) for 3 height units (3U) 470316A to support
wall/pole/cabinet/plinth mounting.
indoors with Flexi Module Casing (EMTA) for 2 height units (2U) 470315A or Flexi
Module Casing (EMHA) for 3 height units (3U) 470316A.
indoors inside a standard cabinet with doors. The FPFC has M5 threads both on the
top and at the bottom for installing cable strain relief for indoor cabinet use.
Note that if the outer diameter of the six output cables is ≥ 16 mm (0.63 in.), a 3U casing
(EMHA) should be used as otherwise there is not enough room for the cables.
The FPFC provides the following features:
•
•
•
•
•
•
•
•
•
•
Support of up to 50 mm2 (0 AWG) or dual 50 mm2 (0 AWG) conductor cross section
for input port feeding
Support of cascading two FPFCs or FPFC to the System Module PDU using the DC
Input port (if high Ampacity Class II OVP is needed for the site)
Support of up to 35 mm2 (2 AWG) output port conductor cross section (3U casing
space)
Nominal input power range -40.5 … - 57 V DC, extended range -36.0 … - 40.5 V DC
and - 57… - 60 V DC
Two fixed outputs and four adjustable outputs
15 kA nominal and max. 30 kA Class II (C, T2) DC input OVP protection integrated
with SPD alarm
Class II (C, T2) protection for both common and differential mode disturbance
Protection level UP (Line - Line) < 500 V (at In, 8 / 20 us) and UP (Line - Ground) <
1000 V (at In, 8 / 20 us)
Output on/off can be controlled by breaker bars on the front panel.
IP65 Ingress Protection
Table 51
Comparison between FPFC v.102 and FPFC v.203
Version
.102
Ampacity (channels 1 and 2)
30 A
.203 or newer
45 A
Ampacity (channels 3, 4, 5 and Adjustable: 4 A, 15 A, 30 A
6)
Adjustable: 4 A, 20 A, 30 A, 45
A
Output port overvoltage
protection
10 kA nominal differential
mode, 15 kA max.
1 kV
EN 61000-4-5
10 kA nominal common mode,
15 kA max.
IEC 62305-4 Class II
g
Input port maximum
180 A
240 A
Output port maximum
6 x 30 A
45 A+45 A+45 A+45 A+30
A+30 A or any mix not
exceeding max. 240 A
Note: Current loads of 45 A require a 10 mm2 (6 AWG) conductor cross section wire at
the minimum.
The FPFC has two dry contact alarm signals (either NO or NC) to indicate SPD status:
DN09142347 Issue: 07
© 2017 Nokia
85
Overview of Flexi Power Distribution Units
Nokia Base Station Optional Items Description
Normal open connection: 5 V alarm detection line is pulled down during alarm: Active
= 0, Inactive = 1.
Normal close connection: 5 V alarm detection line is pulled up during alarm: Active =
1, Inactive = 0.
•
•
Table 52
FPFC alarm interface pin map
Pin
g
Signal
1
N/C Internally
2
N/C Internally
3
N/C Internally
4
Normal Open
5
Common
6
Normal Closed
7
Reserved
8
N/C Internally
Note: The above pin map is not compatible with FSMx shared LMP/power alarms. A
Flexi System External Alarm (FSEB) 471424A needs to be used.
In case the protective components have been damaged by the surge pulse, an alarm
can be detected from FPFC. The alarm connection is Normally Open - an alarm is raised
when connection becomes Closed. The complete FPFC needs to be replaced with a new
one in order to protect the power feeding lines again. The damage of the protective
component does not turn off the power feeding between the modules.
In distributed sites, SPD alarms can be connected to the pole top RF Module external
alarm interface. In wall, floor and cabinet installations, the Flexi System Module external
alarm interface can be used too.
For the FPFC delivery contents, see Contents of the Flexi Power Distribution and Fuses
Outdoor (FPFC) (Efore) delivery and Installing Flexi Power Distribution and Fuses
Outdoor (FPFC) (AcBel) in Installing Nokia Base Station Optional Items.
For installation instructions, see Installing Flexi Power Distribution and Fuses Outdoor
(FPFC) (Efore) and Installing Flexi Power Distribution and Fuses Outdoor (FPFC)
(AcBel) in Installing Nokia Base Station Optional Items.
22.2.2 Flexi Power Distribution and Fuses Outdoor (FPFC)
dimensions and weight
Dimensions and weight of Flexi Power Distribution and Fuses Outdoor (FPFC) 472508A.
Table 53
FPFC dimensions and weight
Property
86
FPFC (Efore)
FPFC (AcBel)
Width
482.6 mm (19 in.)
482.6 mm (19 in.)
Height
72.5 mm (2.85 in.)
72.5 mm (2.85 in.)
Depth
262 mm (10.31 in.)
270 mm (10.63 in.)
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 53
Overview of Flexi Power Distribution Units
FPFC dimensions and weight (Cont.)
Property
FPFC (Efore)
Weight
5.8 kg (12.79 lb)
FPFC (AcBel)
6.2 kg (13.67 lb)
22.2.3 Flexi Power Distribution and Fuses Outdoor (FPFC) LED
indications
LED indications visible on the Flexi Power Distribution and Fuses Outdoor (FPFC)
472508A front panel.
Table 54
FPFC LED indications
LEDs
Breakers
Output voltage
On
On
On
Off
Off
Off
22.3 Flexi Power Distribution Submodule (FPFD)
description
Hardware description of Flexi Power Distribution Submodule (FPFD) 472301A.
Figure 44
Flexi Power Distribution Submodule (FPFD) (Artesyn)
DCinput
DCoutput
DN09142347 Issue: 07
Controlpanel
© 2017 Nokia
87
Overview of Flexi Power Distribution Units
Figure 45
Nokia Base Station Optional Items Description
Flexi Power Distribution Submodule (FPFD) (Efore)
DCinput
DCoutput
Controlpanel
22.3.1 Flexi Power Distribution Submodule (FPFD) operation
Operation considerations for Flexi Power Distribution Submodule (FPFD) 472301A.
Flexi Power Distribution Sub-Module (FPFD) is a highly integrated optional sizeoptimized power distribution unit (PDU) for System Module variant FSMF. It is installed in
the top left slot of the System Module.
The FPFD has integrated basic Over Voltage Protection (OVP Type approval level with 2
kV/1 kV), EMC filtering and reverse polarity protection. It is IP65 rated.
Flexi Power Distribution Sub-Module (FPFD) can be used for stacked and feederless
configurations in the same way as earlier integrated Flexi PDUs. In feederless
configurations, FPFD can be used with optional Over Voltage Protection units (Flexi
System External OVP FSES or FSEP).
Flexi Power Distribution Sub-Module (FPFD) provides four external -48 V DC outputs
(fixed to 40 A (v. 204)) for Flexi Modules (RF Module, RRH, or external System Module)
or any standard 48 V DC device at the site, and one internal DC output to System
Module itself.
22.3.2 Flexi Power Distribution Submodule (FPFD) dimensions
and weight
Dimensions and weight of Flexi Power Distribution Submodule (FPFD) 472301A.
88
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 55
Overview of Flexi Power Distribution Units
FPFD dimensions and weight
Property
Value
Width
max. 190 mm (7.48 in.)
Height
max. 35 mm (1.4 in.)
Depth
max. 360 mm (14.17 in.)
Weight
max. 2 kg (4.4 lb)
22.3.3 Flexi Power Distribution Sub-Module (FPFD) interfaces
Dimensions and weight of Flexi Power Distribution Sub-Module (FPFD) 472301A.
The FPFD provides the following external interfaces:
•
One -48 V DC input: 10-50 mm2 (7-1/0 AWG)
Figure 46
FPFD DC input connector dimensions (Artesyn)
10.8mm(0.43in)
10.4mm(0.41in)
Figure 47
FPFD DC input connector dimensions (Efore)
8.7mm(0.34in)
13.8mm(0.54in)
•
DN09142347 Issue: 07
Four external -48 V DC outputs: 10-16 mm2 (7-6 AWG) screw terminals
© 2017 Nokia
89
Overview of Flexi Power Distribution Units
Figure 48
Nokia Base Station Optional Items Description
FPFD DC output connector dimensions (Artesyn)
5.8mm(0.23in)
6.7mm(0.26in)
Figure 49
FPFD DC output connector dimensions (Efore)
6.0mm(0.24in)
6.9mm(0.27in)
•
•
•
The size of the DC input cable is determined by the power of the DC current fed.
One internal DC output to the System Module
ON/OFF switches
Status LEDs on the front panel
22.3.4 Flexi Power Distribution Submodule (FPFD) LED
indications
LED indications visible on the Flexi Power Distribution Submodule (FPFD) 472301A front
panel.
The control panel is located on the front panel of the Flexi Power Distribution Submodule
(FPFD). There are five LEDs for the corresponding output ports, and two push buttons
for the ON/OFF functionality of the the outputs.
Table 56
FPFD LED indications
LED color
Description
No color
Output is disabled
-
Yellow
Standby, output disabled
Overload, over temperature or
short circuit > Automatic restart
Waiting for retry
Green
90
Fault caused by
Normal operation, output
enabled
© 2017 Nokia
-
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 56
Overview of Flexi Power Distribution Units
FPFD LED indications (Cont.)
LED color
Description
Fault caused by
Red
Fault, output disabled
Overload, over temperature or
short circuit > Remains OFF
after fault
Red, blinking
Fuse #1 will remain disabled.
Fuse #2 to fuse #5 only
signalling function.
Reverse polarity or “feed-in”
into output
All blinking red
All outputs disabled after
power on
Internal hardware failure
indication
Yellow, blinking
Remote controlled, output
disabled
-
Blue, blinking
Selection phase active
-
22.4 Flexi Power Distribution and Fuses Indoor (FPFI)
description
Hardware description of Flexi Power Distribution and Fuses Indoor (FPFI) 472394A.
Figure 50
Flexi Power Distribution and Fuses Indoor (FPFI)
22.4.1 Flexi Power Distribution and Fuses Indoor (FPFI) operation
Operation considerations for Flexi Power Distribution and Fuses Indoor (FPFI) 472394A.
Flexi Power Distribution and Fuses Indoor (FPFI) is capable of distributing nominal -48
VDC to two Flexi Multiradio System Modules, three RF Modules, two Line Terminal
Equipments (LTE) and to the cabinet fan. An FPFI is required for Flexi Cabinet Outdoor
Small (FCOS) internal power distribution. The distributed voltage complies with ETS 300
132-2.
The FPFI provides the following features:
•
•
•
DN09142347 Issue: 07
Input screw terminals on the front panel
Eight output screw terminals on the front panel
DC input overvoltage protection, 5 kA Class II (C, T2)
© 2017 Nokia
91
Overview of Flexi Power Distribution Units
•
•
•
Nokia Base Station Optional Items Description
Class tube fuses for Line Terminal Units (LTE1 and LTE2 outputs)
Overvoltage protection
2 x M5 unit grounding interface on the front panel
The FPFI unit includes input and outputs connectors together with output fuses. It can be
installed either horizontally or vertically.
FPFI interfaces are shown in Figure 51: Flexi Power Distribution and Fuses Indoor
(FPFI) front panel.
Figure 51
Flexi Power Distribution and Fuses Indoor (FPFI) front panel
22.4.2 Flexi Power Distribution and Fuses Indoor (FPFI)
dimensions
Dimensions Flexi Power Distribution and Fuses Indoor (FPFI) 472394A.
Flexi Power Distribution and Fuses Indoor (FPFI) contains fixing points to a 19-inch rack
system.
Table 57
FPFI dimensions
Property
92
Value
Height
~44 mm/1U (~1.75 in.)
Width
482.6 mm (19 in.)
Depth
max. 80 mm (max. 3.15 in.)
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Flexi System External OVP (FSES) description
23 Flexi System External OVP (FSES)
description
Hardware description of Flexi System External OVP (FSES) 472285A.
Figure 52
Flexi System External OVP (FSES)
23.1 Flexi System External OVP (FSES) operation
Operation considerations for Flexi System External OVP (FSES) 472285A.
Flexi System External OVP (FSES) protects Flexi sub-modules against surge pulse(s) in
power feeding lines. It is also used to provide power to the Flexi Site Support Module
(FCSA), and for altering the DC cable diameter. It does not require regular maintenance.
The FSES gives SPD Class II (C, T2) surge protection 15 kA for DC power feed and
provides IP65 protection. It is used in both ends of the long DC feeder line, but not at the
input of a System Module because of its limited ampacity. However, it can be used at the
System Module FSMF variant DC input when the optional FPFD PDU is not installed or
FSME/ESMB/ESMC when the integrated Power Distribution DC ports are not used. It
gives:
•
protection level UP (differential, that is line – line) < 500 V (at In, 8/20 us).
•
protection level UP (common, that is line – ground) < 1000 V (at In, 8/20 us).
The FSES can be installed:
•
•
•
•
DN09142347 Issue: 07
on the side of a 3U casing.
on the roof of Flexi Cabinet for Indoor (FCIA).
on the roof of Flexi Cabinet for Outdoor (FCOA).
on Flexi Pole Kit (FPIA).
© 2017 Nokia
93
Flexi System External OVP (FSES) description
Nokia Base Station Optional Items Description
In case the protective components have been damaged by the surge pulse, an alarm
can be detected from FSES. The alarm connection is Normally Open - an alarm is raised
when connection becomes Closed. The complete FSES need to be replaced with a new
one in order to protect the power feeding lines again. The damage of the protective
component does not turn off the power feeding between the modules.
In distributed sites, SPD alarms are connected to the pole top RF Module external alarm
interface. In wall, floor and cabinet installations, the Flexi System Module external alarm
interface can be used, too.
Maximum constant output current for the FSES is 30 A DC. Version 472285A.204
supports 40 A load current.
For the FSES delivery contents, see Contents of the Flexi System External OVP (FSES)
delivery in Installing Nokia Base Station Optional Items.
For installation instructions, see Installing Flexi System External OVP (FSES) in the
Installing Nokia Base Station Optional Items document.
23.2 Flexi System External OVP (FSES) dimensions and
weight
Dimensions and weight of Flexi System External OVP (FSES) 472285A.
Table 58
FSES dimensions and weight
Property
Value
Width
122.5 mm (4.8 in.)
Height
74.5 mm (2.9 in.)
Depth
123 mm (4.8 in.)
Weight
1.5 kg (3.3 lb)
23.3 Flexi System External OVP (FSES) interfaces
External interfaces of Flexi System External OVP (FSES) 472285A.
94
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Figure 53
Flexi System External OVP (FSES) description
Flexi System External OVP (FSES) interfaces
Alarminterface
DCoutput/input
DCoutput/input
Grounding
Flexi System External OVP (FSES) has the following electrical interfaces:
•
•
•
•
DC output/input with a preinstalled cable including a Multibeam connector
DC feeder interface with a three-pole screw terminal
Grounding interface with a pre-installed cable
Alarm interface with a two-pole screw terminal
IP boots for the DC and alarm interfaces are delivered together with FSES.
See Table 59: Allowed cable thicknesses for FSES for the maximum allowed cable sizes
for FSES.
Table 59
Allowed cable thicknesses for FSES
Interface type
DN09142347 Issue: 07
Cable size
DC feeder
Max. 25 mm2
Alarm (Normally Open)
Max. 2.5 mm2
© 2017 Nokia
95
Flexi System External OVP (FSEP) description
Nokia Base Station Optional Items Description
24 Flexi System External OVP (FSEP)
description
Hardware description of Flexi System External OVP (FSEP) 473246A.
Figure 54
Flexi System External OVP (FSEP)
24.1 Flexi System External OVP (FSEP) operation
Operation considerations for Flexi System External OVP (FSEP) 473246A.
Flexi System External OVP (FSEP) protects Flexi sub-modules and DC power sourcing
equipment against surge pulse(s) in power feeding lines. It is also used to provide power
to the Flexi Site Support Module (FCSA), and for altering the DC cable diameter. It does
not require regular maintenance.
The FSEP gives SPD Class II (C, T2) surge protection 15 kA for DC power feed and
provides IP65 protection. It is used in both ends of the long DC feeder line. It gives:
•
protection level UP (differential, that is line – line) < 500 V (at In, 8/20 us).
•
protection level UP (common, that is line – ground) < 1000 V (at In, 8/20 us).
The FSEP can be installed:
•
•
•
•
•
96
on the side of a 3U casing.
on the roof of Flexi Cabinet for Indoor (FCIA).
on the roof of Flexi Cabinet for Outdoor (FCOA).
on Flexi Pole Kit (FPIA).
on Flexi Mounting Auxiliary Bracket (FMAA) (using two screws).
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Flexi System External OVP (FSEP) description
When protective components have been damaged by a surge pulse, an alarm can be
detected from FSEP. The alarm connection is Normally Closed, and an alarm is raised
when the connection becomes Open. The complete FSEP assembly needs to be
replaced with a new one in order to protect the power feeding lines again. The damage
of the protective component does not turn off the power feeding between the modules.
In distributed sites, OVP alarms are connected to the pole top radio external alarm
interface. In wall, floor and cabinet installations, the Flexi System Module external alarm
interface can be used too.
Maximum constant output current for the FSEP is 80 A DC.
For the FSEP delivery contents, see Contents of the Flexi System External OVP (FSEP)
delivery in Installing Nokia Base Station Optional Items.
For installation instructions, see Installing Flexi System External OVP (FSEP) in the
Installing Nokia Base Station Optional Items document.
24.2 Flexi System External OVP (FSEP) dimensions and
weight
Dimensions and weight of Flexi System External OVP (FSEP) 473246A.
Table 60
FSEP dimensions and weight
Property
Value
Height
74.5 mm (2.9 in.)
Width
122.5 mm (4.8 in.)
Depth
123 mm (4.8 in.)
Weight
1.5 kg (3.3 lb)
24.3 Flexi System External OVP (FSEP) interfaces
External interfaces of Flexi System External OVP (FSEP) 473246A.
Flexi System External OVP (FSEP) has the following electrical interfaces:
Table 61
FSEP interfaces
Interface
DC connector for
shielded DC
feeder line
DN09142347 Issue: 07
Name on the HW
Number of
interfaces
Connector type
Description
N/A
1
3-pole screw
terminal up to 35
mm2 (2 AWG)
Power delivery
DC connector for N/A
PDU or AC/DC or
RFM/RRH
1
2-pole screw
terminal up to 16
mm2 (6 AWG)
Power delivery
towards the
overvoltage
protected unit
© 2017 Nokia
97
Flexi System External OVP (FSEP) description
Table 61
Nokia Base Station Optional Items Description
FSEP interfaces (Cont.)
Interface
Name on the HW
Number of
interfaces
Connector type
Description
Alarm connector
N/A
1
2-pole screw
terminal (0.14 …
1.5 mm2, max.
diameter 5 mm)
Alarms
Grounding
N/A
1
M5x8 screw
Grounding
(factory-installed
cable)
IP boots for the DC and alarm interfaces are included in the FSEP delivery.
See Figure 55: Flexi System External OVP (FSEP) interfaces for the external interfaces
of the FSES.
Figure 55
Flexi System External OVP (FSEP) interfaces
2-poleDCinterface
Alarminterface
3-poleDCinterface
Grounding
98
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Flexi Fiber Optical Distribution Unit (FODA) description
25 Flexi Fiber Optical Distribution Unit (FODA)
description
Hardware description of Flexi Fiber Optical Distribution Unit (FODA) 472606A.
Figure 56
Flexi Fiber Optical Distribution Unit (FODA)
Cablegland
OPT1-3
OPT4-5
OPT6
OPT7 OPT8-9
OPT10-12
Cablegland
optional
25.1 Flexi Fiber Optical Distribution Unit (FODA)
operation
Operation considerations for Flexi Fiber Optical Distribution Unit (FODA) 472606A.
Flexi Fiber Optical Distribution Unit (FODA) is a stand-alone outdoor product which can
be used for cable routing between the RF Module and System Module. Together with the
combination of jumper cables and different length of feeder cables, it simplifies site
installation. The FODA provides up to 12 outputs for RF Modules or RRHs. The FODA
supports different installation options with mounting brackets. It can be assembled to a
3U casing together with the 2U PDU. It can also be mounted directly on a pole/mast or
wall.
For the FODA delivery contents, see Contents of the Flexi Fiber Optical Distribution Unit
(FODA) delivery in Installing Nokia Base Station Optional Items.
For installation instructions, see Installing Flexi Fiber Optical Distribution Unit (FODA) in
Installing Nokia Base Station Optional Items.
25.2 Flexi Fiber Optical Distribution Unit (FODA)
dimensions
Dimensions of Flexi Fiber Optical Distribution Unit (FODA) 472606A.
DN09142347 Issue: 07
© 2017 Nokia
99
Flexi Fiber Optical Distribution Unit (FODA) description
Nokia Base Station Optional Items Description
Flexi Fiber Optical Distribution Unit (FODA) contains fixing points to a 19-inch fixing
system.
Table 62
FODA dimensions
Property
100
Value
Height
Max. ~45.7 mm/1U (~1.75 in.)
Width
482.6 mm (19 in.)
Depth
Max. 200 mm (max. 7.87 in.)
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Flexi System External Alarm Module (FSEB)
description
26 Flexi System External Alarm Module (FSEB)
description
Hardware description of Flexi System External Alarm Module (FSEB) 471424A.
Figure 57
Flexi System External Alarm Module (FSEB)
ESD
Groundingpoint
EACM16
UltraSiteand Talk
swapcases
BTSinterconnection
cable
26.1 Flexi System External Alarm Module (FSEB)
operation
Operation considerations for Flexi System External Alarm Module (FSEB) 471424A.
The optional Flexi System External Alarm Module (FSEB) provides IP65 protected screw
terminals (up to 24 for alarm inputs and 6 for control outputs). The number of supported
alarms depends on the mode used (12 alarms versus 24 alarms mode with jumper
X1103).
Table 63
Alarms supported by System Module variants
System Module variant
Alarms supported
Requirements
ESMA, ESMB, ESMC
24
N/A
FSMC, FSMD, FSME
(WCDMA)
24
FSEB v.304
FSMD, FSME (LTE)
12
N/A
FSMF (SBTS)
24
FSEB v.304
FSMF (WCDMA)
24
FSEB v.304
WN6.0 MP3 or later
WN7.0 2.0 or later
DN09142347 Issue: 07
© 2017 Nokia
101
Flexi System External Alarm Module (FSEB)
description
Table 63
Nokia Base Station Optional Items Description
Alarms supported by System Module variants (Cont.)
System Module variant
g
Alarms supported
Requirements
FSMF (LTE)
24
FSEB v.304
FSMF (GSM/EDGE)
24
FSEB v.304
AirScale System Module
12
N/A
Note: FSMF (LTE) and FSMF (GSM/EDGE) without FSEB support only 12 alarms.
The FSEB can be installed in the following ways:
•
•
•
•
On a wall (vertical or horizontal position)
On a pole using Flexi Pole Installation Kit (FPIA)
On a module casing in pole, wall, or stack installations using Flexi Mounting Auxiliary
Brackets (FMAA)
On the Flexi Cabinet for Indoor (FCIA) or Flexi Cabinet for Outdoor (FCOA) roof
(horizontal position only)
If there is not enough space left for the FSEB or other auxiliary boxes on the FCIA,
FCOA, or the FMAA, the additional auxiliary box(es) must be installed on a wall or pole
close to the BTS. In stack, wall or pole installations, additional FMAA brackets can also
be installed if there are multiple plinths. Note that the distance from each box to the BTS
is limited by the lengths of the cables coming from the auxiliary box.
For the System Module variant FSMF, the HDMI-D37 EAC cable FTSI (472578A) is
required between the System Module and FSEB. FSMF supports a maximum of 12
separate EAC lines (0-6 Alarms and 0-6 Alarms or controls) via the HDMI connector. The
FSMF HDMI also supports the CAN bus (SW dependency) which can bring 12 additional
alarm via FSEB (up to a total of 24 alarms). Furthermore, an FTSI cable connects FSEB
D37 pins 1-6 and 13-18 to FSMF HDMI pins 7-12 allowing alarm input combining. 24
EAC lines are supported using the MDR36-D37 EAC cable FTSJ (472629A), which is
connected between the FSEB and ESMA/ESMB/ESMC or FSMC/FSMD/FSME.
For the FSEB delivery contents, see Contents of the Flexi System External Alarm
Module (FSEB) delivery in Installing Nokia Base Station Optional Items.
For installation instructions, see Installing Flexi System External Alarm Module (FSEB) in
the Installing Nokia Base Station Optional Items document.
26.2 Flexi System External Alarm Module (FSEB)
dimensions and weight
Dimensions and weight of Flexi System External Alarm Module (FSEB) 471424A.
Table 64
FSEB dimensions and weight
Property
102
Value
Height
94 mm (3.7 in.)
Width
335 mm (13.2 in.)
Depth
182 mm (7.2 in.)
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 64
Flexi System External Alarm Module (FSEB)
description
FSEB dimensions and weight (Cont.)
Property
Value
Weight
2 kg (4.4 lb)
The mounting dimensions of the FSEB enclosure are 110 mm x 324 mm (4.3 in. x 12.8
in.).
26.3 Flexi System External Alarm Module (FSEB)
interfaces
External interfaces of Flexi System External Alarm Module (FSEB) 471424A.
Figure 58
FSEB interfaces
ESD
Groundingpoint
EACM16
UltraSiteand Talk
swapcases
BTSinterconnection
cable
Printed wiring board interface
The PWB interface and connectors are presented in Table 65: FSEB interface and
connector overview.
Table 65
FSEB interface and connector overview
Interface
EACX-I
EACX-S
Type
Sub-D37, female
10 SMDK1/6-3.5
Description
•
12 direct alarm inputs
•
6 alarm outputs
(ESM extension,
compatible to EAC on
ESM)
60 pin screw terminal
Combines EACX-I, EACX-II
DN09142347 Issue: 07
© 2017 Nokia
103
Flexi System External Alarm Module (FSEB)
description
Table 65
Nokia Base Station Optional Items Description
FSEB interface and connector overview (Cont.)
Interface
Type
Description
Fire detector power supply
Screw terminal
DC power supply for the
optional fire detector
ESM
Sub-D37, male
Interface to the System
Module, *CAN bus
*EACX-II
Sub-D37, female
12 alarm inputs through CAN
bus
*Not used in 12 Alarms mode.
See Figure 59: FSEB PWB for the FSEB PWB.
Figure 59
104
FSEB PWB
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Flexi Capacity Extension Submodule (FBBA)
description
27 Flexi Capacity Extension Submodule (FBBA)
description
Hardware description of Flexi Capacity Extension Submodule (FBBA) 472182A.
Figure 60
Flexi Capacity Extension Submodule (FBBA)
27.1 Flexi Capacity Extension Submodule (FBBA)
operation
Operation considerations for Flexi Capacity Extension Submodule (FBBA) 472182A.
Flexi Capacity Extension Submodule (FBBA) provides additional capacity to the BTS.
One FBBA brings an additional 576 channel elements (CE) for WCDMA. HSPA
performance is 756 Mbps for downlink and 157 Mbps for uplink. When dedicated for LTE
(FDD or TDD), it supports a capacity of 3x20 MHz (or 6x10 MHz) with MIMO enabling
450 Mbps downlink and 150 Mbps uplink data speeds.
Up to two FBBAs are supported per one Flexi Multiradio System Module, and they are
installed side by side in the bottom slots of the System Module. Adding capacity
submodules in the field does not affect the ongoing traffic.
FBBA is powered by the System Module core module. The second submodule is
powered by the first one. Every extension submodule is connected to the core module
through a QSFP connector.
27.2 Flexi Capacity Extension Submodule (FBBA)
dimensions and weight
Dimensions and weight of Flexi Capacity Extension Submodule (FBBA) 472182A.
DN09142347 Issue: 07
© 2017 Nokia
105
Flexi Capacity Extension Submodule (FBBA)
description
Table 66
Nokia Base Station Optional Items Description
FBBA dimensions and weight
Property
Value
Height
42 mm (1.6 in.)
Width
220 mm (8.7 in.)
Depth
363 mm (14.3 in.)
Weight
3.35 kg (7.38 lb)
27.3 Flexi Capacity Extension Submodule (FBBA)
interfaces
External interfaces of Flexi Capacity Extension Submodule (FBBA) 472182A.
Table 67
FBBA interfaces
Name
Purpose
Number of
interfaces
Level
I/O
Power supply in
(DC in)
FBBx power supply input
1
48 V, 48RTN
I
Power supply out
(DC out)
FBBx power supply output
1
48 V, 48RTN
O
Low Latency
interconnection
interface (SRIO)
RP1/RP2 and low latency
data interconnection
between FSMs
1 x SRIO, 6
Gbit/s
Optical or
electrical (XAUI)
I/O
FSMx interface
(BB EXT)
RP3, RP2 and RP1
connection between FSMx
and FBBx
3 x RP3, 6 Gbit/s
XAUI, LVTTL,
CML
I/O
1 x RP3-01, 6
Gbit/s
1 x SRIO, 6
Gbit/s
1 x I2C (SDA,
SCL)
2 x Sync signals
(FCB, BTSclk)
System interface
(RF/EXT)
RP3-01/CPRI interface
to/from FRs or other FSMs
Only RP3-01 is supported
between FSMs
1 x OBSAI RP3Optical
01 (up to 6 Gbit/s)
or CPRI
I/O
Logical interface
numbering:
- RF/EXT4 in FBB1
- RF/EXT5 in FBB2
106
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Flexi Capacity Extension Submodule (FBBA)
description
27.4 Flexi Capacity Extension Submodule (FBBA) LED
indications
LED indications visible on the Flexi Capacity Extension Submodule (FBBA) 472182A
front panel.
Table 68
FBBA LED indications
Name
DN09142347 Issue: 07
Notes
STATUS
Red/green & 1 Hz red blinking (Unit fault)
RF/EXT
RF Link status
SRIO
SRIO Link status
© 2017 Nokia
107
Flexi Baseband Extension Module (FBBC) description
Nokia Base Station Optional Items Description
28 Flexi Baseband Extension Module (FBBC)
description
Hardware description of Flexi Baseband Extension Module (FBBC) 472797A.
Figure 61
Flexi Baseband Extension Module (FBBC)
DCIN
RF1
RF2 BBEXT RF3
SRIO/RF4
28.1 Flexi Baseband Extension Module (FBBC)
operation
Operation considerations for Flexi Baseband Extension Module (FBBC) 472797A.
Flexi Baseband Extension Module (FBBC) provides additional capacity to the BTS,
increasing both baseband capacity and RF connectivity of Flexi Multiradio 10 BTS
System Module. Compared to Flexi Capacity Extension Sub-Module (FBBA), FBBC
provides the same capacity as FBBA (for LTE, 3x20 MHz or 6x10 MHz with 2x2 MIMO,
enabling 450 Mbps downlink and 150 Mbps uplink data speeds), however, the FBBC has
four optical OBSAI RP3-01 6 Gbps ports.
Up to two FBBCs are supported per one Flexi Multiradio System Module, and, 1U high,
they are installed side by side in the bottom slots of the System Module. Adding capacity
submodules in the field does not affect the ongoing traffic.
FBBC is powered by the System Module core module, and the second sub-module is
powered by the first one. Every extension sub-module is connected to the core module
through a QSFP connector. A BTS equipped with two FBBC sub-modules provides up to
twelve optical RP3-01 6 Gbit/s connections towards RF units. Mixed configurations with
FBBA are possible.
28.2 Flexi Baseband Extension Module (FBBC)
dimensions and weight
Dimensions and weight of Flexi Baseband Extension Module (FBBC) 472797A.
108
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 69
Flexi Baseband Extension Module (FBBC) description
FBBC dimensions and weight
Property
Value
Height
42 mm (1.6 in.)
Width
220 mm (8.7 in.)
Depth
363 mm (14.3 in.)
Weight
3.1 kg (6.83 lb)
28.3 Flexi Baseband Extension Module (FBBC)
interfaces
External interfaces of Flexi Baseband Extension Module (FBBC) 472797A.
Table 70
FBBC interfaces
Name
Purpose
Number of interfaces
DC IN
FBBx power supply -48 VDC
input
1
SRIO/RF4
SRIO extension interface or
RP3-01 extension interface
1 x SRIO, 6 Gbit/s
BB EXT (QSFP)
Baseband extension interface
towards System Module
3 x RP3, 6 Gbit/s
1 x RP3-01, 6 Gbit/s
1 x SRIO, 6 Gbit/s
1 x I2C (SDA, SCL)
2 x Sync signals (FCB,
BTSclk)
RF1/2/3
RP3-01 interface towards RF
units
3 x OBSAI RP3-01 (up to 6
Gbit/s)
28.4 Flexi Baseband Extension Module (FBBC) LED
indications
LED indications visible on the Flexi Baseband Extension Module (FBBC) 472797A front
panel.
DN09142347 Issue: 07
© 2017 Nokia
109
Flexi Baseband Extension Module (FBBC) description
Figure 62
Nokia Base Station Optional Items Description
Flexi Baseband Extension Module (FBBC) LEDs
CLASS1
LASERPRODUCT
STATUS
RF1
Table 71
RF2
RF3
SRIO/RF4
LED indications
Name
110
Notes
STATUS
Red/green & 1 Hz red blinking (Unit fault)
RF/EXT
RF Link status
SRIO
SRIO Link status
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Overview of Flexi Cabinets
29 Overview of Flexi Cabinets
An overview of Flexi Cabinets.
29.1 Flexi Cabinet for Indoor (FCIA) description
Hardware description of Flexi Cabinet for Indoor (FCIA) 470152A.
Figure 63
Flexi Cabinet for Indoor (FCIA)
29.1.1 Flexi Cabinet for Indoor (FCIA) construction
Construction and locking options Flexi Cabinet for Indoor (FCIA) 470152A.
Flexi Cabinet for Indoor (FCIA) provides 19-inch wide free space for installing Flexi
modules. The cabinet is made of hot galvanizing steel plate and is used for indoor
installations requiring a secure cabinet or large indoor configurations exceeding 22U
requiring earthquake protection. It has a cabinet core made of an aluminium chassis
enclosed with aluminium sides and door. The FCIA cabinet does not carry any electrical
DN09142347 Issue: 07
© 2017 Nokia
111
Overview of Flexi Cabinets
Nokia Base Station Optional Items Description
functionality; there are no traditional backplanes or electronics. The cable entries are
located at the top of the cabinet. External cables are connected directly to the Flexi
modules inside the cabinet.
The following optional modules can be mounted to the FCIA cabinet:
•
•
•
Flexi Power Rectifier (FPRx)
Flexi System External Alarm Module (FSEB)
Flexi System External OVP (FSES/FSEP)
Flexi Cabinet for Indoor (FCIA) locking
The cabinet door can be locked with a door-open key. When the key is turned
anticlockwise, the door opens and when it is turned clockwise, the door is locked.
The cabinet can also be fitted with a padlock. It does not support customer-specific BTS
locks.
29.1.2 Flexi Cabinet for Indoor (FCIA) optional items
Optional items used with Flexi Cabinet for Indoor (FCIA) 470152A.
Flexi Battery Mounting Kit for FCIA (FMBB)
Flexi Battery Mounting Kit (FMBB) 471459A is needed when using batteries in FCIA. The
mounting kit is installed at the bottom of the cabinet.
Flexi Power Rectifier (FPRx)
Flexi Rectifier Module (FPRB) CS7000030 is a modular 6 kW output power AC rectifier
package made up of three individual 2 kW/3 kW AC/DC power modules operating in a
parallel mode configuration. The FPRB outputs a positive earthed –54 VDC (V48N) as a
respective BTS operational supply voltage rail and for site battery charging. It supports
Flexi Multiradio BTS configurations in indoor and outdoor cabinets, and stack, pole and
wall configurations.
For more information on the FPRx, see Flexi Power Rectifier (FPRB) description.
Flexi System External Alarm (FSEB)
Flexi System External Alarm (FSEB) 471424A is installed on the cabinet roof and used
for extending the Flexi BTS alarm connector up to 24 alarms.
For more information on the FSEB, see Flexi System External Alarm (FSEB) description.
Flexi System External OVP (FSES/FSEP)
Flexi System External OVP (FSES/FSEP) 472285A/473246A is an IP-protected
enclosure for overvoltage protection and power terminals. The FSES/FSEP is installed
on the cabinet roof.
For more information on the OVP enclosures, see Flexi System External OVP (FSES)
description or Flexi System External OVP (FSEP) description.
29.1.3 Flexi Cabinet for Indoor (FCIA) dimensions and weight
Dimensions and weight of Flexi Cabinet for Indoor (FCIA) 470152A.
112
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 72
Overview of Flexi Cabinets
FCIA dimensions and weight
Property
Value
Height
1793 mm/40.3U (70.59 in.)
Width
597 mm (23.50 in.)
Depth
521 mm (20.51 in.)
Weight (empty cabinet)
59 kg (130 lb)
Free space for modules
36U
29.2 Flexi Cabinet for Outdoor (FCOA) description
Hardware description of Flexi Cabinet for Outdoor (FCOA) 470142A.
Figure 64
Flexi Cabinet for Outdoor (FCOA)
29.2.1 Flexi Cabinet for Outdoor (FCOA) construction
Construction and locking options of Flexi Cabinet for Outdoor (FCOA) 470142A.
Flexi Cabinet for Outdoor (FCOA) provides 19-inch wide free space for installing BTS
modules. It has a cabinet core made of an aluminium chassis enclosed with aluminium
sides and door. The cabinet door can be locked with a triangle door-open key. The
DN09142347 Issue: 07
© 2017 Nokia
113
Overview of Flexi Cabinets
Nokia Base Station Optional Items Description
cabinet can also be fitted with a padlock for additional protection using the padlock
fastener provided. The FCOA itself does not have any electrical functionality and
therefore, it does not increase BTS site power consumption.
The cabinet has the following functions:
•
•
•
•
It provides the base station and cables protection against external damage and
foreign objects
It provides earthquake protection for an installation of more than nine modules
It houses the Flexi Cabinet Site Support Module (FCSA) that provides long-term
battery back-up and a 4U-high IP55-protected space for Line Terminal Equipment, or
Flexi Cabinet Outdoor Small (FCOS) that provides an 8U-high IP55-protected space.
Together with Flexi Cabinet Air Filter (FCFA), it protects the BTS in extremely dirty
conditions
29.2.2 Flexi Cabinet for Outdoor (FCOA) optional items
Optional items used with Flexi Cabinet for Outdoor (FCOA).
Flexi Cabinet Air Filter (FCFA)
The optional Flexi Cabinet Air Filter (FCFA) 470146A can be added in case of extremely
dirty environment (for fresh air cooled modules). The optional air filter provides cover for
extremely dirty conditions by over-pressurizing the cabinet. The FCFA delivery includes
the air filter and a wind plate.
The air filter is installed in the back of the cabinet, replacing the original back wall. It
consists of a filter element, eight axial fans, a control logic, and back wall mechanics.
The pressure sensor is integrated with the control box. The wind plate is installed in the
cabinet door.
The control of the FCFA fans is based on a pressure sensor. The pressure sensor
measures pressure inside the cabinet and this information is then used for controlling the
fan speed.
The filter element in the Flexi Cabinet Air Filter (FCFA) is a disposable item and its
product code is 822169A.
The air filter is presented in Figure 65: Flexi Cabinet Air Filter (FCFA).
114
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Figure 65
Overview of Flexi Cabinets
Flexi Cabinet Air Filter (FCFA)
Flexi Cabinet Site Support Module (FCSA)
The optional Flexi Cabinet Site Support Module (FCSA) 470145A can be used with the
outdoor cabinet to provide long-term battery back-up time for the Flexi BTS and a space
for installing line terminal equipment units. The FCSA provides IP55 protected
installation space for the power distribution unit (PDU), IBBU AC interface box, rectifier
units, line terminal equipment, control card, heat exchanger, and fans. When the FCSA is
installed in the FCOA, there is 16U open space in the horizontal rack and 5U open space
in the vertical rack for modules.
g
Note: Flexi Cabinet Site Support Module (FCSA) does not include a heater. Therefore,
the lowest temperature inside the FSCA module might be the ambient temperature.
The highest allowed temperature for the FCSA module is +50°C (+122°F). The allowed
temperature of the units must be checked before installing them into the FCSA module.
The maximum inside temperature of the FCSA module might be approximately +10 to
+20°C (+50 to +68°F) higher than the ambient temperature. This is caused by the inside
heat dissipation.
There is a separate option for battery installation in the site support module. Batteries are
fixed and cabled using Flexi Mounting Kit for Batteries (FMBA). The kit contains battery
cables, a cable from IBBU to the battery cables for safe installation, rubber spacers, and
front fixing parts to the batteries.
The site support is presented in Figure 66: Flexi Cabinet Site Support Module (FCSA).
DN09142347 Issue: 07
© 2017 Nokia
115
Overview of Flexi Cabinets
Figure 66
Nokia Base Station Optional Items Description
Flexi Cabinet Site Support Module (FCSA)
Heat
Exchanger
Control
card
Batteries
Lineterminal
equipmentspace
FMBA
Flexi Cabinet Outdoor Small (FCOS)
Flexi Cabinet Outdoor Small (FCOS) 472395A is designed to house 19-inch multiplexers
and microwave radio indoor units. It provides an IP-protected space of 8U for installing
IP20-rated units.
Flexi Power Rectifier (FPRx)
Flexi Rectifier Module (FPRB) CS7000030 is a modular 6 kW output power AC rectifier
package made up of three individual 2 kW/3 kW AC/DC power modules operating in a
parallel mode configuration. The FPRB outputs a positive earthed –54 VDC (V48N) as a
respective BTS operational supply voltage rail and for site battery charging. It supports
Flexi Multiradio BTS configurations in indoor and outdoor cabinets, and stack, pole and
wall configurations. For more information on the FPRB, see Flexi Power Rectifier (FPRB)
description.
Flexi System External Alarm (FSEB)
Flexi System External Alarm (FSEB) 471424A is installed on the cabinet roof and used
for extending the Flexi BTS alarm connector up to 24 alarms. For more information on
the FSEB, see Flexi System External Alarm (FSEB) description.
Flexi System External OVP (FSES/FSEP)
116
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Overview of Flexi Cabinets
Flexi System External OVP (FSES/FSEP) 472285A/473246A is an IP-protected
enclosure for overvoltage protection and power terminals. The FSES/FSEP is installed
on the cabinet roof. For more information on the OVP enclosures, see Flexi System
External OVP (FSES) description or Flexi System External OVP (FSEP) description.
29.2.3 Flexi Cabinet for Outdoor (FCOA) dimensions and weight
Dimensions and weight of Flexi Cabinet for Outdoor (FCOA) 470142A.
Table 73
FCOA dimensions and weights
Property
Value
Height
1550 mm (61 in.)
Width
770 mm (30.3 in.)
Depth
770 mm (30.3 in.)
Depth with air filter
930 mm (36.6 in.)
Depth with air filter and wind plate
1020 mm (40.2 in.)
Weight (empty cabinet)
60.8 kg (134 lb)
Weight (with air filter and wind plate)
97.2 kg (214.3 lb)
Total weight (fully equipped with batteries)
358 kg (789 lb)
Free space for modules
40U (30U horizontally + 5U + 5U vertically)
Free space for modules (site support and
batteries installed)
21U (16U horizontally + 5U vertically)
29.3 Flexi Cabinet Outdoor Small (FCOS) description
Hardware description of Flexi Cabinet Outdoor Small (FCOS) 472395A and the related
optional items.
The following hardware is covered in this section:
•
•
Flexi Cabinet Outdoor Small (FCOS) 472395A
Optional items:
–
–
–
DN09142347 Issue: 07
Flexi Cabinet Wall Kit (FCWA) 472396A
Flexi Cabinet Pole Kit (FCPA) 472397A
Flexi Cabinet Cabinet Assembly Kit (FCCA) 472398A
© 2017 Nokia
117
Overview of Flexi Cabinets
Nokia Base Station Optional Items Description
Figure 67
Flexi Cabinet Outdoor Small (FCOS) installed on the floor
29.3.1 Flexi Cabinet Outdoor Small (FCOS) construction
Construction and installation options of Flexi Cabinet Outdoor Small (FCOS) 472395A.
Flexi Cabinet Outdoor Small (FCOS) is an outdoor cabinet designed to house 19-inch
multiplexers and microwave radio indoor units. It provides a space of 8 U for installing
IP20 units. The ingress protection rating of FCOS is IP55. Maximum allowed heat load is
650 W (max. 450 W produced by equipment and max. 200 W by solar load).
Installation options:
•
•
•
Stand-alone on the floor
Stackable with Flexi modules (on top of a Flexi casing or plinth)
Pole/wall installations
–
•
•
118
same fixing points as for Flexi modules
19-inch rack installation
Inside Flexi Cabinet for Outdoor (FCOA)
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Overview of Flexi Cabinets
The FCOS has a factory-installed dust filter that can be replaced without turning the
power off. Furthermore, it has two self-controlled fans that operate on 48 VDC. The two
fans’ combined maximum power consumption is 60 W. There is no heater inside the
FCOS. The FCOS does not support customer-specific BTS locks or padlocks.
The FCOS is delivered without Flexi Power Distribution and Fuses Indoor (FPFI). As
FPFI is required for FCOS operation it must be ensured that FPFI is ordered together
with FCOS.
g
Note: Flexi Cabinet Outdoor Small (FCOS) is recommended instead of Flexi Cabinet
Site Support Module (FCSA).
29.3.2 Flexi Cabinet Outdoor Small (FCOS) optional items
Optional items available for Flexi Cabinet Outdoor Small (FCOS) 472395A.
The following optional items are available for Flexi Cabinet Outdoor Small (FCOS):
•
•
•
Flexi Cabinet Wall Kit (FCWA), which consists of wall mounting brackets and screws
needed for installing FCOS on a wall.
Flexi Cabinet Pole Kit (FCPA), which is used together with a pole mounting kit
(FPKA/FPKC).
Flexi Cabinet Cabinet Assembly Kit (FCCA), which consists of fixing rails and screws
needed for installing FCOS inside Flexi Cabinet for Outdoor (FCOA).
29.3.3 Flexi Cabinet Outdoor Small (FCOS) dimensions and
weight
Dimensions and weight of Flexi Cabinet Outdoor Small (FCOS) 472395A.
Table 74
FCOS dimensions and weight
Property
Value
Height
625 mm (24.6 in.)
Height with feet
805 mm (31.7 in.)
Width
451 mm (17.7 in.)
Depth
510 mm (20.1 in.)
Weight
24.3 kg (53.5 lb)
For installation instructions, see Installing Nokia Base Station Modules in Cabinets.
29.4 Flexi Cabinet Outdoor (FCOB) description
Hardware description of Flexi Cabinet Outdoor (FCOB) 473240A.
DN09142347 Issue: 07
© 2017 Nokia
119
Overview of Flexi Cabinets
Nokia Base Station Optional Items Description
Figure 68
Flexi Cabinet Outdoor (FCOB) 473240A installed vertically on the floor
29.4.1 Flexi Cabinet Outdoor (FCOB) construction
Construction and operation of Flexi Cabinet Outdoor (FCOB) 473240A.
Flexi Cabinet Outdoor (FCOB) is an outdoor cabinet designed to house Flexi BTS
modules. Its main application is to support the installation of Flexi Indoor System Module
variants in an outdoor environment. The FCOB provides IP55-protected installation
space for Flexi Indoor System Module (FSIH) and an optional GPS module. The FCOB
enables installing indoor System Module variants in similar outdoor locations as Flexi
outdoor modules.
The FCOB provides an internal area of 4U for following types of configurations:
•
•
g
FSIH + 1U optional unit (for example, Nokia GPS module FYGG/FYGE)
4U optional units (no batteries)
Note: Consult Nokia about your optional unit configuration.
Maximum allowed heat load produced by the 4U of units installed inside FCOB is 1.5
kW.
FCOB features
•
•
•
•
Field-replaceable PDU box (for power delivery and fan control)
Support for a total of eight customer external alarms, and additionally four alarms are
reserved for cabinet purposes
Field replaceable internal and external fan sub-module
Heater
Installation options
120
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Overview of Flexi Cabinets
Wall installation (using either side of FCOB, vertical installation only)
Pole installation (using either side of FCOB, vertical installation only)
Floor installation:
•
•
•
stand-alone on the floor (either vertically or horizontally)
two FCOBs stacked (horizontal installation only)
3U casings stacked on top of FCOB (horizontal installation only):
–
–
–
•
•
up to three 3U casings for earthquake Zone 4
up to five 3U casings for earthquake Zone 2
FCOB installed on top of a 3U casing (horizontal installation only) (not allowed for
earthquake Zone 4). The maximum number of 3U casings in a stack with a
FCOB installed on top is three.
–
For installation instructions, see Installing Flexi Cabinet Outdoor (FCOB).
29.4.2 Flexi Cabinet Outdoor (FCOB) dimensions and weight
Dimensions and weight of Flexi Cabinet Outdoor (FCOB) 473240A.
Figure 69
Flexi Cabinet Outdoor (FCOB) dimensions and weight
Table 75
.)
.6 in
(23
mm
(23.6
in.)
380mm (15.0in.)
600mm(23.6in.)
600
mm
380mm(15.0in.)
600mm(23.6in.)
600
FCOB dimensions and weight
Property
Value
Height (cabinet)
600 mm (23.6 in.)
Height (mounting bracket)
160 mm (6.3 in.)
Width
380 mm (15.0 in.)
Depth
600 mm (23.6 in.)
Weight (empty cabinet without mounting kits)
Max. 29 kg (max. 63.9 lb)
Volume
137 l
29.4.3 Flexi Cabinet Outdoor (FCOB) interfaces
External interfaces of Flexi Cabinet Outdoor (FCOB) 473240A.
DN09142347 Issue: 07
© 2017 Nokia
121
Overview of Flexi Cabinets
Nokia Base Station Optional Items Description
Table 76
FCOB PDU box interfaces
Interface
Connector
Description
Power supply (DC IN -/DC IN
+)
2-pole connector
DC input, max. 50 A
Power supply (DC OUT +/DC
OUT -)
2-pole connector
DC output 1, max. 1500 W
Breaker
-
For DC output 1
Power supply (Terminal block)
Terminal block connector
DC output 2, max. 180 W
Fuse
-
DC output 2, 5 A port
protection
Switch
Rotary switch
1500 W High performance
1500 W Low noise
1000 W Lower noise
700 W Lower noise
EAC
HDMI connector
EAC to SM
TEST
HDMI connector
Debugging and testing
Figure 70
Flexi Cabinet Outdoor (FCOB) PDU interfaces
DCIN-
Breaker
DCIN+
Terminalblock
(Output2)
LEDs
EAC
TEST
DCOUT+
DCOUT(Output1)
Table 77
Fanmodeswitch
FCOB cabinet interfaces
Interface
122
Fuse
Connector
Description
Grounding
M8 or 2 x M5 (NEBS)
-
ESD
ESD stud
-
External alarm
Terminal block connector
Alarm input connector
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Overview of Flexi Cabinets
29.4.4 Flexi Cabinet Outdoor (FCOB) LED indications
LED indications of Flexi Cabinet Outdoor (FCOB) 473240A PDU box.
Table 78
FCOB LED indications
Status
DN09142347 Issue: 07
Condition
Color
Description
Internal fans (INT
FAN)
Normal
Green, stable
Normal fan operation
Fault
Red, stable
Fan speed differs 30% or more
from the reference
External fans (EXT
FAN)
Normal
Green, stable
Normal fan operation
Fault
Red, stable
Fan speed differs 30% or more
from the reference
Board running status
(RUN)
Normal
Green, stable
PDU box powered & no fault
Fault
Red, stable
PDU box in malfunction status
© 2017 Nokia
123
BTS power consumption
Nokia Base Station Optional Items Description
30 BTS power consumption
Information on where to find power consumption details for various types of modules.
For power consumption of RF Module, Remote Radio Head and System Module
variants, see the following documents:
Flexi Multiradio BTS RF Module and Remote Radio Head Description
Flexi Multiradio 10 Base Station System Module Description
Flexi Multiradio BTS LTE System Module Description
Flexi Multiradio BTS WCDMA System Module Description
Nokia AirScale Radio Description
Nokia AirScale System Module Product Description
•
•
•
•
•
•
30.1 Power consumption of Flexi Outdoor Cabinet fans
(FCFA, FCSA, and FCOS)
Power consumption values for FCFA, FCSA and FCOS fans.
Table 79
Power consumption of Flexi Outdoor Cabinet fans (FCFA, FCSA, and
FCOS)
FCFA
FCSA
FCOS
FCOB
60 W clean
34 W at 23°C (73.4°F)
32 W minimum
30 W idle
100 W typical
94 W at 55°C (131°F)
43 W typical
50 W typical
180 W dirty
N/A
58 W maximum
150 W max. ambient
-
-
-
500 W cold start
(heater active)
The total power consumption of Flexi Cabinet Site Support Module depends on which
third-party configuration has been installed in the line terminal equipment space.
The estimated maximum heat load can be assumed to be the same as the power
consumption values.
124
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Region-specific hardware descriptions
31 Region-specific hardware descriptions
31.1 Repeater Interface Module (FHCC) description
Hardware description of Repeater Interface Module (FHCC) 472662A.
Figure 71
Repeater Interface Module (FHCC)
31.1.1 Repeater Interface Module (FHCC) operation
Operation considerations for Repeater Interface Module (FHCC) 472662A.
Repeater Interface Module (FHCC) is a special purpose Remote Radio Head, which
interconnects the System Module and operators’ repeater system.
The FHCC includes six full pipes of transmitters and receivers which can be connected
to the operators’ repeater system through analog IF interfaces. Transmitters and
receivers consist of digital transceiver sections and analog IF sections. RF sections are
not included in the RIM since the RF frequency converter and power amplifier are
accommodated by the repeater system.
The FHCC supports two modes of working:
•
•
Dedicated mode, that is, the FHCC is directly connected to the operators’ repeater
system only.
Coupling sector mode. In this mode FHCC is connected to both, operators’ repeater
system and RF Modules. The repeater system shares the same I/Q data with RF
Modules in downlink. The uplink I/Q data are diversity summed, path by path in the
RIM.
The FHCC assembly contains two identical boards. RIM is 433 mm (17.05 in.) deep
together including cooling fans. It can be installed into any 19-inch standard rack and to
third-party standard cabinets.
DN09142347 Issue: 07
© 2017 Nokia
125
Region-specific hardware descriptions
Nokia Base Station Optional Items Description
The ingress protection level of the indoor module is IP20. The cooling system has three
individual 60 mm (2.36 in.) fans which are mounted on the backside of the chassis. The
hot air is sucked out from the back of the module. The operating ambient temperature of
the unit is in the range of 0ºC to +65ºC (+32ºF to +149ºF).
31.1.2 Repeater Interface Module (FHCC) dimensions and weight
Dimensions and weight of Repeater Interface Module (FHCC) 472662A.
Table 80
FHCC dimensions and weight
Property
Value
Height
87.2 mm (3.43 in.)
Width
433 mm (17.05 in.)
Depth
434 mm (17.09 in.)
Weight
14.8 kg (32.6 lb)
31.1.3 Repeater Interface Module (FHCC) interfaces
External interfaces of Repeater Interface Module (FHCC) 472662A.
One RIM supports up to three sectors. Each sector has two TX and two RX supporting
2x2 MIMO. RIM is connected to the System Module through an optical fiber link with
OBSAI RP3-01 interfaces. It has additional OBSAI RP3-01 optical interfaces to provide
interconnections with RF Modules.
See Table 81: FHCC interfaces for FHCC interfaces.
Table 81
FHCC interfaces
Name
Initial
Number of
interfaces
Level
Connected
I/O
DC IN
1
-48 V, 48 RTN
System Module or
Power Supply Unit
I
Grounding
GND
1
GND
Grounding bar
O
Operational
State Visual
Indication
(Fan alarm
and Module
Status)
LED
2x2
LVTTL
LED for the two TRX
sub assemblies
O
Optical
interface2)
SM1-4
2x2
Optical
System Module
I/O
Power
Supply1)
(fuse
protected)
1)
2)
126
Unit/Fan
Power consumption is around 180 W.
Optical interface connecting to System Module. LC-APC type 2-core multiple-mode SFP TRX module.
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 81
FHCC interfaces (Cont.)
Name
g
Region-specific hardware descriptions
Initial
Number of
interfaces
Level
Connected
I/O
Optical
interface3)
RU1-4
2x2
Optical
RF Module
I/O
Test
connector4)
LMT
1x2
Ethernet
Local Maintenance
I/O
RS-232
RS-232
1x2
RS-232
Front Panel
I/O
Transmitter
TX1...3/M
3x2
Analog IF
Delay Equalizer
O
Transmitter
Monitor
Mon
3x2
Analog IF
Test instruments on
site
O
Receiver
RX1...3/M
3x2
Analog IF
Delay Equalizer
I
Receiver
Monitor
Mon(10 dB)
3x2
Analog IF
Test instruments on
site
O
10 MHz
Reference
Clock
10 MHz
1x2
Analog IF
Test instruments on
O
site or Delay Equalizer
TX1...3/M
RX1...3/M
REF/D
Note: 3x2 in the number of interfaces column means two TRX boards, each board has
three interfaces.
Figure 72
Front panel view of Repeater Interface Module (FHCC)
31.1.4 Repeater Interface Module (FHCC) LED indications
LED indications visible on the Repeater Interface Module (FHCC) 472662A front panel.
The FHCC module status indicator and fan failure indicator are tricolor LEDs. The main
LED indications of the FHCC are listed and explained in Table 82: FHCC LED
indications.
Table 82
FHCC LED indications
LED color
None
3)
4)
DN09142347 Issue: 07
Priority
0 (highest)
Description
SM O&M control
Optical interface connecting to RF Module. LC-APC type 1-core single-mode SFP TRX module.
Access through an adapter card, JTAG port, EAC port and MCU boot debug UART port can be led out of
RIM box.
© 2017 Nokia
127
Region-specific hardware descriptions
Table 82
Nokia Base Station Optional Items Description
FHCC LED indications (Cont.)
LED color
Priority
Description
Red, stable for less than 5 sec
1
Resetting/switched on
Yellow, stable
2
Initialization/disconnected (no optical
link)
Red, periodic stable (500 ms)
3
Module highlighting (through RP1
control messages)
Yellow, stable
4
Block (through RP1 control messages)
Red, stable
5
Faulty (RRH critical alarm, out of order)
Red and green periodic
6
ALD faulty (ALD critical alarm, out of
order)
Red, blinking
7
Degraded (RRH major alarm)
Red and green periodic
8
ALD degraded (ALD major alarm)
Yellow, blinking
9
SW downloading (startup, not enabled)
Yellow, blinking
10
Configuration (optical connection ok,
not enabled)
Green, blinking
11
SW downloading (normal operation,
enabled)
Green, stable
12
Working (module configured and
enabled)
Yellow, stable (500 ms)
Green, stable (500 ms)
Fan status LED indications:
•
•
Stable RED - one or more fans faulty or degraded
Stable GREEN - all fans working
31.2 Cable Holder for Flexi System Module 10 indoor
FSIH/FBIH (FCHB) description
Hardware description of Cable Holder for Flexi System Module 10 indoor FSIH/FBIH
(FCHB) 473091A.
Cable Holder for Flexi System Module 10 indoor FSIH/FBIH (FCHB) is designed for
fixing cables when Flexi System Module 10 indoor is installed on a wall or stacked on the
ground. The FCHB can be installed on the left or right side of the FSIH casing, or on both
sides if using double units. Hardware installed inside the casing can be pulled out when
FCHB is installed.
128
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Figure 73
DN09142347 Issue: 07
Region-specific hardware descriptions
Cable Holder for Flexi System Module 10 indoor FSIH/FBIH (FCHB)
© 2017 Nokia
129
GPS specific hardware description
Nokia Base Station Optional Items Description
32 GPS specific hardware description
32.1 GPS GLONASS Receiver Antenna (FYGB)
description
Hardware description of GPS GLONASS Receiver Antenna (FYGB) 472748A and the
related optional items and cables.
The following hardware is covered in this section:
•
•
•
•
GPS GLONASS Receiver Antenna (FYGB) 472748A
GPS Mounting Kit (FYMA) 471605A
Flexi GPS Surge Protector Kit (FYEA) 471812A
Power/data cables:
–
–
–
–
–
130
GPS cable set (FYHA) up to 30 m 471606A (for a System Module with an MDR
connector)
GPS cable set (FYHB) up to 100 m 471653A (for a System Module with an MDR
connector)
GPS cable set (FTSE) up to 30 m 472510A (for a System Module with an HDMI
connector)
GPS cable set (FTSH) up to 100 m 472577A (for a System Module with an HDMI
connector)
GPS cable set (FTSM) up to 300 m 472870A (for a System Module with an HDMI
connector)
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Figure 74
GPS specific hardware description
GPS GLONASS Receiver Antenna (FYGB)
32.1.1 GPS GLONASS Receiver Antenna (FYGB) operation
Operation considerations for GPS GLONASS Receiver Antenna (FYGB) 472748A.
Flexi Multiradio BTS uses GPS (Global Positioning System) or GNSS (Global Navigation
Satellite System) as a source for frequency and time synchronization. A GPS/GLONASS
antenna with an integrated receiver is installed outside for satellite visibility, and is
directly connected to the System Module. DC power feed for the receiver is supplied
through the combined power and data cable. The operating temperature range is from
-40°C to +85°C (-40°F to +185°F).
g
Note: FYGB is set to support both GPS and GLONASS satellite systems. To support
GLONASS-only mode, FYGB has to operate with Nokia approved firmware v2.11 or
later.
GPS Mounting Kit (FYMA)
Figure 75: FYGB mounted on a pole using GPS Mounting Kit (FYMA) illustrates a polemounted antenna using GPS Mounting Kit (FYMA). FYMA supports all Nokia GPS
receiver antennas, and is installed on a pole (D ≤ 160 mm (63 in.)) by using one selflocking band. Wall installations are also supported.
DN09142347 Issue: 07
© 2017 Nokia
131
GPS specific hardware description
Figure 75
Nokia Base Station Optional Items Description
FYGB mounted on a pole using GPS Mounting Kit (FYMA)
Flexi GPS Surge Protector Kit (FYEA)
Flexi GPS Surge Protector Kit (FYEA) 471812A is available as an optional unit to protect
the System Module from transient voltage and current spikes (Class III protection). It is
installed to the GPS antenna line. The surge protector is particularly useful in locations
with a high lightning risk.
Figure 76
132
Flexi GPS Surge Protector Kit (FYEA) v. 103
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
GPS specific hardware description
Figure 77
Flexi GPS Surge Protector Kit (FYEA) v. 104
Table 83
FYEA supply voltage
Property
Value
Nominal voltage
UN 18 V DC
Max. operating voltage
Umax 22 V DC
Arrester rated voltage
Uc 22 V DC/15 V AC
Synchronization
The GPS/GLONASS antenna is connected to the Sync In port on the System Module
front panel.
Figure 78
Sync In port on the FSMC/D/E front panel
PowerSupply
RFModule2
PowerSupply
RFModule1
PowerSupply
RFModule 3
PowerSupply
BB-EXT Module
Membraneswitches
RF1
LED
RF1
RF2
LED
RF2
SM RF3
LED LED
SM RF3
EXT
LED
EXT
EAC
10/100/1000
EthLMP
10/100Eth
BBU/FPMA
DN09142347 Issue: 07
10/100/1000
EthOVP
Sync
Out
10/100/1000
EthETP
© 2017 Nokia
Transmission
interfaces
Sync OPT-RF1
In
Groundingpoints
OPT-RF3
OPT-RF2
OPT-EXT2
OPT-EXT1
133
GPS specific hardware description
Figure 79
Nokia Base Station Optional Items Description
Sync In port on the FSMF front panel
Sync
In
The synchronization proceeds according to the following steps:
1. The System Module receives pps from the GPS/GNSS through Sync In.
2. The System Module generates a System Clock and a System Synchronization Burst.
3. The periodic Synchronization Burst, which contains air-interface-specific frame
numbers and time references, provides time synchronization between BTSs to
reduce interference.
4. The System Module forwards the System Clock and a System Synchronization Burst
to the RF Module(s) through an optical interface.
The DC power feed (12 V DC) for the receiver is supplied through combined power/data
cables that are listed at the start of this chapter.
g
Note: System Module contains an oven controlled oscillator (OCXO), which provides a
highly stable clock even if the FYGB fails or GPS/GLONASS signal is temporarily
unavailable (Holdover functionality).
For installation instructions, see Installing GPS GLONASS Receiver Antenna (FYGB) in
Installing Nokia Base Station Optional Items.
32.1.2 GPS GLONASS Receiver Antenna (FYGB) dimensions and
weight
Dimensions and weight of GPS GLONASS Receiver Antenna (FYGB) 472748A and
GPS Mounting Kit (FYMA) 471605A.
Table 84
FYGB dimensions and weight
Property
Value
Height
72.5 mm (2.85 in.)
Depth
95 mm (3.74 in.)
Weight
0.15 kg (5.4 oz)
Table 85
GPS Mounting Kit (FYMA) dimensions (antenna excluded)
Property
134
Value
Height
146 mm (5.75 in.)
Depth
155 mm (6.10 in.)
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 85
GPS specific hardware description
GPS Mounting Kit (FYMA) dimensions (antenna excluded) (Cont.)
Property
Weight
Table 86
Value
0.32 kg (11.3 oz)
Flexi GPS Surge Protector Kit (FYEA) dimensions and weight
Property
Value
Height (mounting plate included)
55 mm (2.17 in.)
Height (enclosure only)
47 mm (1.85 in.)
Width (mounting plate included)
162 mm (6.38 in.)
Width (enclosure only)
65 mm (2.56 in.)
Depth (cable lead-ins excluded)
150 mm (5.91 in.)
Weight
0.56 kg (1.23 lb)
32.2 Flexi GPS Box (FYGD) description
Hardware description of Flexi GPS Box (FYGD) 472802A.
32.2.1 Flexi GPS Box (FYGD) operation
Operation considerations for Flexi GPS Box (FYGD) 472802A.
Flexi GPS Box (FYGD) is used for providing two synchronization resources, including
GPS/GNSS Passive Antenna (Primary Source) and 1588 1PPS+TOD (Backup Source),
for Flexi BTS. It is installed inside the System Module variant FSMF in the top left slot
and enables synchronization sharing between Flexi BTS and other systems. FYGD
obtains +15 V from the Sync In (HDMI) port of the System Module.
g
DN09142347 Issue: 07
Note: Flexi GPS Box (FYGD) is IP20-rated and for indoor site use only.
© 2017 Nokia
135
GPS specific hardware description
Figure 80
Nokia Base Station Optional Items Description
GPS Box deployment
Passive
GPS
Antenna
RFCable
Splitter
To an other
system
RFCable
GNSS
GNSS
Ant
Sync
Out
RJ45
RJ45
1588 In
1588 Out
HDMICable
1588
Status
PWR On/Off
1PPS+ToDsynctoFSMx
32.2.2 Flexi GPS Box (FYGD) dimensions and weight
Dimensions and weight of Flexi GPS Box (FYGD) 472802A.
Table 87
FYGD dimensions and weight
Property
Value
Height
30 mm (1.18 in.)
Width
182.5 mm (7.18 in.)
Depth
300.5 mm (11.83 in.)
Weight
1.5 kg (3.31 lb)
32.2.3 Flexi GPS Box (FYGD) interfaces
External interfaces of Flexi GPS Box (FYGD) 472802A.
136
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Flexi GPS Box (FYGD) front panel
HDMI
Figure 81
GPS specific hardware description
SMA
Female
GNSS
Ant
GNSS
RJ45
SyncOut 1588 In
Table 88
RJ45
1588 Out
1588
Status
PWR On/Off
FYGD interfaces
Property
Value
GNSS Antenna Port
SMA female
Sync Out
HDMI
1588 1PPS+TOD Input Port (1588 In)/1588
1PPS+TOD Output Port (1588 Out)
RJ-45
Timing Resource Switch (GNSS/1588)
Either GPS or 1588 1PPS+TOD can be
selected as primary timing resource by the
switch. The factory default setting is GNSS.
Power Switch (On/Off)
For turning on/off the power supply
The FYGD delivery includes one 0.6 m (2 ft) HDMI Sync cable.
32.2.4 Flexi GPS Box (FYGD) LED indications
LED indications visible on the Flexi GPS Box (FYGD) 472802A front panel.
•
•
One red LED is used to indicate the power supply.
One green LED:
–
–
–
solid on to indicate that the primary timing resource is being used.
slowly blinking with 1sec on and 1sec off to indicate that the secondary timing
resource is being used.
when the primary timing resource is 1588, off to indicate both timing resources
are failed.
32.3 Flexi Enhanced External GPS Box (FYGE)
description
Hardware description of Flexi Enhanced External GPS Box (FYGE) 472978A.
32.3.1 Flexi Enhanced External GPS Box (FYGE) operation
Operation considerations for Flexi Enhanced External GPS Box (FYGE) 472978A.
Flexi Enhanced External GPS Box (FYGE) is used for providing synchronization for one
Flexi BTS from a GNSS system. The following installation options are available:
DN09142347 Issue: 07
© 2017 Nokia
137
GPS specific hardware description
•
•
Inside the System Module variant FSMF in the top left slot
Inside a 1U casing:
–
–
–
g
Nokia Base Station Optional Items Description
on a 19-inch rack directly above or below the System Module variant FSIH
mounted on top of or below FSIH (stack installation)
wall mounted (using the two holes at the bottom of the 1U casing)
Note: Flexi Enhanced External GPS Box (FYGE) is IP20-rated and for indoor site use
only.
FYGE has built-in overvoltage protection:
•
•
Antenna port : < 6 V
Power input port : up to -72 V
Figure 82
FYGE deployment
Passive
GPS
Antenna
RFCable
Splitter
To an other
system
RFCable
-48V
GNSS
Ant
Sync
Out
Status
HDMICable
PWR
0V
DC IN
1PPS+ToDsynctoFSMx
For the FYGE delivery contents, see Contents of the Flexi Enhanced GPS Box (FYGE)
delivery in Installing Nokia Base Station Optional Items.
For installation instructions, see Installing Flexi Enhanced External GPS Box (FYGE) in
Installing Nokia Base Station Optional Items.
138
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
GPS specific hardware description
32.3.2 Flexi Enhanced External GPS Box (FYGE) dimensions and
weight
Dimensions and weight of Flexi Enhanced External GPS Box (FYGE) 472978A.
Table 89
FYGE dimensions and weight
Property
Value
Height
30 mm (1.18 in.)
Width
182.5 mm (7.18 in.)
Depth
300.5 mm (11.83 in.)
Weight
1.0 kg (2.2 lb)
32.3.3 Flexi Enhanced External GPS Box (FYGE) interfaces
External interfaces of Flexi Enhanced External GPS Box (FYGE) 472978A.
Figure 83
SMA
Female
HDMI
Flexi Enhanced External GPS Box (FYGE) front panel
GNSS ANT
SYNCOUT
Table 90
-48V
STATUS
0V
DC IN
POWER
FYGE interfaces
Property
Value
GNSS Antenna Port
SMA female
Sync Out
HDMI
-48 V DC Input (-48V 0V/DC IN)
Tyco type 1982295-2
The FYGE delivery includes one 0.8 m (2.6 ft) HDMI cable and one 2 m (6.5 ft) power
cable with a connector to connect to the FYGE power port.
32.3.4 Flexi Enhanced External GPS Box (FYGE) LED indications
LED indications visible on the Flexi Enhanced External GPS Box (FYGE) 472978A front
panel.
Table 91
FYGE LED indications
LED color
DN09142347 Issue: 07
Description
Red (POWER)
Power supply on
Green, blinking (STATUS)
Satellite capturing status
Green, solid (STATUS)
Normal status without holdover
Red, solid (STATUS)
In-holdover status
© 2017 Nokia
139
GPS specific hardware description
Table 91
Nokia Base Station Optional Items Description
FYGE LED indications (Cont.)
LED color
Red, blinking (STATUS)
Description
24-hour holdover expired (if holdover is
disabled, blinking red light indicates that GNSS
timing source is lost)
32.4 OD External GNSS Enhanced Holdover (FYGG)
description
Hardware description of OD External GNSS Enhanced Holdover (FYGG) 473185A.
Figure 84
OD External GNSS Enhanced Holdover (FYGG)
32.4.1 OD External GNSS Enhanced Holdover (FYGG) operation
Operational and installation aspects of OD External GNSS Enhanced Holdover (FYGG)
473185A.
Outdoor External GNSS Module with Enhanced Holdover provides an IP65-rated
solution for RF GNSS signal to 1PPS+TOD conversion and extended holdover
performance using existing GNSS infrastructure. It supports the two global positioning
systems GPS and GLONASS. The following installation options are available:
•
•
Inside the System Module variant FSMF in the top left slot
Inside a 1U casing:
–
–
–
on a 19-inch rack directly above or below the System Module
mounted on top of or below the System Module in a stack installation
wall mounted (using the two holes at the bottom of the 1U casing)
The FYGG delivery includes an HDMI cable and a DC power cable.
140
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Figure 85
GPS specific hardware description
FYGG deployment
RFCable
GNSS
Antenna
Splitter
RFCable
To another
system
-48V
PWR
GNSS ANT
STATUS
SYNCOUT
DCIN
HDMICable 1PPS+ToDsynctoFSMx
For the FYGG delivery contents, see Contents of the OD External GNSS Enhanced
Holdover (FYGG) delivery in Installing Nokia Base Station Optional Items.
For installation instructions, see Installing OD External GNSS Enhanced Holdover
(FYGG) in Installing Nokia Base Station Optional Items.
32.4.2 OD External GNSS Enhanced Holdover (FYGG) dimensions
and weight
Dimensions and weight of OD External GNSS Enhanced Holdover (FYGG) 473185A.
Table 92
FYGG dimensions and weight
Property
DN09142347 Issue: 07
Value
Height
30 mm (1.18 in.)
Width
182.5 mm (7.18 in.)
Depth
300.5 mm (11.83 in.)
Weight
1.2 kg (2.65 lb)
© 2017 Nokia
141
GPS specific hardware description
Nokia Base Station Optional Items Description
32.4.3 OD External GNSS Enhanced Holdover (FYGG) interfaces
External interfaces of OD External GNSS Enhanced Holdover (FYGG) 473185A.
Figure 86
OD External GNSS Enhanced Holdover (FYGG) front panel
PWR
GNSS ANT
STATUS
DCIN
SYNCOUT
Table 93
FYGG interfaces
Property
Value
GNSS Antenna Port
SMA female
Sync Out
HDMI
-48 V DC Input (-48V 0V/DC IN)
PwrProfile
Grounding
1 x M8
2 x M5
32.4.4 OD External GNSS Enhanced Holdover (FYGG) LED
indications
LED indications of OD External GNSS Enhanced Holdover (FYGG) 473185A.
OD External GNSS Enhanced Holdover (FYGG) has two LEDs on its front panel:
One green LED to indicate that the power supply is on (POWER)
One red/green/orange tri-color LED to indicate status (STATUS)
•
•
Table 94
FYGG LED indications
Mode
142
FYGG status
LED color
LED status
All
FYGG in reset state
Blank (no light)
Blank (no light)
All
Site/self-survey
ongoing and FYGG is
tracking satellites
Green
Blinking, 2 Hz
Holdover disabled
Normal operation
when FYGG is
tracking satellites
Green
Solid
Holdover disabled
GNSS timing source is Red
lost (both modes,
survey and normal)
Blinking, 1 Hz
Holdover enabled
FYGG is tracking
satellites and
preparing holdover
capability
Blinking, 1 Hz
© 2017 Nokia
Green
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 94
GPS specific hardware description
FYGG LED indications (Cont.)
Mode
FYGG status
LED color
LED status
Holdover enabled
Normal operation and
FYGG is capable for
holdover
Green
Solid
Holdover enabled
GNSS timing source
lost and FYGG in
holdover
Red
Solid
Holdover enabled
No GNSS timing
Red
source available and
FYGG indicates the
phase accuracy during
holdover is outside the
limits
Blinking, 1 Hz
Holdover enabled
FYGG HW is faulty
Red
due to worn-out OCXO
component
Blinking, 2 Hz
All
Software download or
software activation is
ongoing
Blinking, 1 Hz
Orange
32.5 Outdoor GNSS Receiver (FYGM) description
Hardware description of Outdoor GNSS Receiver (FYGM) 473394A.
Figure 87
Outdoor GNSS Receiver (FYGM)
32.5.1 Outdoor GNSS Receiver (FYGM) operation
Operation considerations of the Outdoor GNSS Receiver (FYGM) 473394A.
Outdoor GNSS Receiver (FYGM) is an external GNSS RF receiver that provides 1PPS +
ToD synchronization to the BTS. It supports GPS, GLONASS, and Beidou systems. The
FYGM provides signal conversion from RFGPS antenna to 1PPS+TOD that can be used
for system module synchronization input.
The FYGM can be installed indoors and outdoors in various mounting options:
•
•
•
DN09142347 Issue: 07
Into free FSMF slot
On the side of a 3U casing
Stand-alone (wall/pole)
© 2017 Nokia
143
GPS specific hardware description
Nokia Base Station Optional Items Description
The ingress protection level of the indoor module is IP65. The operating ambient
temperature of the unit is in the range of -40ºC to +55ºC (-40ºF to 131ºF).
The Outdoor GNSS Receiver (FYGM) delivery contains:
•
•
FYGM module
GPS cable (2.5 m, 995862)
Optional items for different kind of mounting options:
•
•
Flexi GPS Surge Protector Kit (FYEA) 471812A
Power/data cables:
–
–
–
–
–
GPS cable set (FYHA) up to 30 m 471606A (for a System Module with an MDR
connector)
GPS cable set (FYHB) up to 100 m 471653A (for a System Module with an MDR
connector)
GPS cable set (FTSE) up to 30 m 472510A (for a System Module with an HDMI
connector)
GPS cable set (FTSH) up to 100 m 472577A (for a System Module with an HDMI
connector)
GPS cable set (FTSM) up to 300 m 472870A (for a System Module with an HDMI
connector)
Figure 88
Installation option 1: FYGM next to System Module
GNSS
Antenna
RFCable
BTSSiteManager
FYGM
PowerIn/Out
STATPWR
ANT
SYNCOUT
12-pole
FSMF
144
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Figure 89
GPS specific hardware description
Installation option 2: FYGM away from System Module
GNSS
Antenna
RFCable
BTSSiteManager
FYGM
PowerIn/Out
STATPWR
ANT
SYNCOUT
FYHAorFYHBforFSMD/E
FTSE,FTSHorFTSMforFSMF/G/L
FYEAGPSSurge
ProtectorKit
(Optional)
FSMF
32.5.2 Outdoor GNSS Receiver (FYGM) dimensions and weight
Dimensions and weight of the Outdoor GNSS Receiver (FYGM) 473394A.
Table 95
FYGM dimensions and weight
Property
Value
Height
38 mm (1.5 in.)
Width
122 mm (4.8 in.)
Depth
122 mm (4.8 in.)
Weight
0.6 kg (1.3 lb)
32.5.3 Outdoor GNSS Receiver (FYGM) interfaces
External interfaces of the Outdoor GNSS Receiver (FYGM) 473394A.
DN09142347 Issue: 07
© 2017 Nokia
145
GPS specific hardware description
Nokia Base Station Optional Items Description
Figure 90
Outdoor GNSS Receiver (FYGM) interfaces
Table 96
FYGM interfaces
Property
Value
GNSS Antenna Port
SMA female
Sync Out
12-pole Deutche Sync Cable outdoor
Grounding
1 x M8
2 x M5
32.5.4 Outdoor GNSS Receiver (FYGM) LED indications
LED indications visible on the Outdoor GNSS Receiver (FYGM) 473394A front panel.
Table 97
FYGM LED indications
FYGM status
LED color
FYGM in reset state
Blank (no light)
Blank (no light)
Site/self survey ongoing and
FYGM is tracking satellites
Green
Blinking, 2 Hz
Normal operation when FYGM
is tracking satellites
Green
Solid
GNSS timing source is lost
(both modes, survey and
normal)
Red
Blinking, 1 Hz
SW download or SW activation Orange
is ongoing
146
LED status
© 2017 Nokia
Blinking, 1 Hz
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Nokia Base Station cables and SFPs
33 Nokia Base Station cables and SFPs
33.1 Transmission cables
Flexi Multiradio 10 BTS transmission cables
Table 98
Flexi Multiradio 10 BTS transmission cables
Name
Product
code
FTCY OD Cable
RJ48C Cat7 15 m
Figure 91
472427A
Length
15 m
(49.2 ft)
Cable
label
995342
For
FTIF
Notes
RJ-48C - open end
FTCY OD Cable RJ48C Cat7 15 m
15000±40
Connector1
Wiring
Connector1
Pinno.:Signal
1: RX_Tip
2: RX_Ring
3: TX2_Tip
4: TX1_Tip
5: TX1_Ring
6: TX2_Ring
7: RX2_Tip
8: RX2_Ring
Pairno:Color
2:
2:
3:
1:
1:
3:
4:
4:
white/orange
orange
white/green
green
blue
green
white/brown
brown
Flexi Multiradio BTS transmission cables
Table 99
Flexi Multiradio BTS transmission cables
Name
DN09142347 Issue: 07
Product
code
Length
Cable
label
For
Notes
FTCB OD Cable
RJ-48C 120 Ω 15
m
470309A
15 m
(49.2 ft)
994970
FTPB, FTIA
RJ-48C - open end, 1
x E1
FTCV OD Cable
RJ-48C 120 Ω 30
m
471713A
30 m
(98.4 ft)
995144
FTPB, FTIA
RJ-48C - open end, 1
x E1
FTCX OD Cable
RJ-48C 120 Ω 50
m
471714A
50 m (164 995145
ft)
FTPB, FTIA
RJ-48C - open end, 1
x E1
© 2017 Nokia
147
Nokia Base Station cables and SFPs
Table 99
Nokia Base Station Optional Items Description
Flexi Multiradio BTS transmission cables (Cont.)
Name
Product
code
Length
Cable
label
For
Notes
FTCE OD Cable
SMB-F/0 75 Ω 15
m
470310A
15 m
(49.2 ft)
994971
FTEB, FTJA
2 x SMB - open end, 1
x E1 coax
FTCF OD Cable
SMB-F/0 75 Ω 30
m
471715A
30 m
(98.4 ft)
995146
FTEB, FTJA
2 x SMB - open end, 1
x E1 coax
FTCG OD Cable
SMB-F/0 75 Ω 50
m
471716A
50 m (164 995147
ft)
FTEB, FTJA
2 x SMB - open end, 1
x E1 coax
FTCH OD Cable
LC SM 1310 15 m
470311A
15 m
(49.2 ft)
994972
FTOA
LC duplex - LC duplex
single-mode fiber
(needed for FOSA
SFP units)
FTCJ OD Cable
TNC-F7O-TNC
M/O 50 Ω 2.5 m
471391A
2.5 m (8.2 995082
ft)
FTFA
TNC male - TNC
female Flexbus
FTCR OD Cable
471408A
RJ-45 Cat5e 15 m
15 m
(49.2 ft)
995094
FTIA, FTJA
RJ-45 - open end, 1 x
Ethernet
FTCP OD Cable
MDR68 100 Ω 30
m
471548A
30 m
(98.4 ft)
995155
FTHA
MDR68 - MDR68
FTCS OD Cable
471717A
RJ-45 Cat5e 30 m
30 m
(98.4 ft)
995148
FTIA, FTJA
RJ-45 - open end, 1 x
Ethernet
FTCT OD cable
471718A
RJ-45 Cat5e 50 m
50 m (164 995149
ft)
FTIA, FTJA
RJ-45 - open end, 1 x
Ethernet
Figure 92
FTCB OD Cable RJ48C 120 Ω 15
15000±40
Wiring
Conn.1
Pinno.
1
2
3
4
5
6
7
8
148
Wire
colour
brown
yellow
white
green
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Figure 93
Nokia Base Station cables and SFPs
FTCV OD Cable RJ48C 120 Ω 30 m
30000 -0/+2%
Conn. 1
Pin No.
Wire
color
1
brown
2
yellow
3
4
white
5
green
6
7
8
Figure 94
FTCE OD Cable SMB-F/0 75 Ω 15 m
15000±40
Figure 95
FTCG OD Cable SMB-F/0 75 Ω 50 m
5000-0/+2%
DN09142347 Issue: 07
© 2017 Nokia
149
Nokia Base Station cables and SFPs
Figure 96
A
Nokia Base Station Optional Items Description
FTCH OD Cable LC SM 1310 15 m
B
B
A
Overallfibre length 15000-0/+2%
Figure 97
FTCJ OD Cable TNC-F7OTNC M/O 50 Ω 2.5 m
2500±20
Pin1
Connector1
Connector2
Pin2
Pin1
Pin20
Pin1
Pin19
Conn. 1
Pin No.
150
Pin19
Conn. 2
Pin No.
Pair no: color
Signal
7
1
6: Green
Alarm0
8
2
7: Blue
Alarm1
9
3
8: Violet
Alarm2
10
4
9: Grey
Alarm3
19
5
4: White/Orange
5V EAC
20
6
5: Yellow
5V EAC
21
7
5: White/Yellow
5VEAC
29
16
10: BlackRed
/
GND
1
19
1: Black
CTRL0
2
20
2: Brown
CTRL1
3
21
3: Red
CTRL2
4
22
4: Orange
CTRL3
28
23
9: White/Grey
GND
30
31
11: Black/Green
GND
© 2017 Nokia
Pin3
Pin36
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Figure 98
Nokia Base Station cables and SFPs
FTCP OD Cable MDR68 100 Ω 30 m
30000±200
Pin1
Pin1
Pinconfigurationfor
bothconnectors
Pin1
Pin34
Pin35
Pin68
Flexi Multiradio BTS GSM/EDGE transmission cables
Table 100
Flexi Multiradio BTS GSM/EDGE transmission cables
Name
Product
code
Length
Cable
label
For
Notes
FTCB OD Cable
RJ-48C 120 Ω 15
m
470309A
15 m
(49.2 ft)
994970
Transmission
unit ->
RJ-48C - open end
FTCE OD Cable
SMB-F/0 75 Ω 15
m
470310A
15 m
(49.2 ft)
994971
Transmission
unit ->
2 x SMB - open end, 1
x E1 coax
2.5 m (8.2 995082
ft)
Transmission
unit ->
TNC male - TNC
female Flexbus
FTCJ OD Cable
471391A
TNC-F/0-TNC-M/0
50 Ω 2.5 m
33.2 Single-mode fiber cables
Single-mode fibers 90°-90°
Table 101
Single-mode fibers 90°-90°
Name
DN09142347 Issue: 07
Product
code
Length
Cable
label
FSOR Flexi
472607A
System fiber SM 4
m
4 m (13.1
ft)
FSOP Flexi SM
fiber 90-90 10 m
472867A
10 m
(32.8 ft)
995548
SM - RF
M/RRH
LC 90° left IP - LC 90°
left IP, SM
FSOS Flexi SM
fiber 90-90 25 m
472868A
25 m (82
ft)
995549
SM - RF
M/RRH
LC 90° left IP - LC 90°
left IP, SM
995432
For
SM - RF
M/RRH
Notes
LC 90° left IP - LC 90°
left IP, SM
SM RFM/FODA
© 2017 Nokia
151
Nokia Base Station cables and SFPs
Figure 99
Nokia Base Station Optional Items Description
FSOR Flexi System fiber SM 4 m
Overallfibrelength4000±20
Connector1
Connector2
Wiring
Conn.1 Conn.2
A
B
Factorydefaultsetting
B
A
Figure 100
FSOP Flexi SM fiber 90-90 10 m
Overallfibre length 100000/+2%
Figure 101
FSOS Flexi SM fiber 90-90 25 m
Overallfibre length 250000/+2%
Single-mode fibers 0°-90°
Table 102
Single-mode fibers 0°-90°
Name
152
Product
code
Length
Cable
label
For
Notes
FSOM Flexi SM
fiber 0-90 2 m
472865A
2 m (6.6
ft)
995546
SM - RRH
LC 0° IP - LC 90° left
IP, SM
FSON Flexi SM
fiber 0-90 5 m
472866A
5 m (16.4
ft)
995547
SM - RRH
LC 0° IP - LC 90° left
IP, SM
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 102
Nokia Base Station cables and SFPs
Single-mode fibers 0°-90° (Cont.)
Name
Product
code
Length
Cable
label
For
Notes
FSOH Flexi RRH
System fiber SM
10 m
472067A
10 m
(32.8 ft)
995272
SM - RRH
LC 0° IP - LC 90° left
IP, SM
FSOL Flexi RRH
System fiber SM
50 m
472069A
50 m (164 995273
ft)
SM - RRH
LC 0° IP - LC 90° left
IP, SM
FSOO Flexi RRH
System fiber SM
110 m
472070A
110 m
(360.9 ft)
995274
SM - RRH
LC 0° IP - LC 90° left
IP, SM
FSOQ Flexi RRH
System fiber SM
200 m
472068A
200 m
(656.2 ft)
995275
SM - RRH
LC 0° IP - LC 90° left
IP, SM
Figure 102
FSON Flexi SM fiber 0-90 5 m
Overallfibre length 5000-0/+2%
Connector2
Connector1
Wiring
Conn.1 Conn.2
A
B
B
A
Figure 103
FSOH Flexi RRH System fiber SM 10
Overallfibre length 10000-0/+2%
Connector2
Connector1
Wiring
Conn.1 Conn.2
A
B
DN09142347 Issue: 07
B
A
© 2017 Nokia
153
Nokia Base Station cables and SFPs
Figure 104
Nokia Base Station Optional Items Description
FSOL Flexi RRH System fiber SM 50
Overallfibre length 50000-0/+2%
Connector2
Connector1
Wiring
Conn.1 Conn.2
A
B
B
A
Figure 105
FSOO Flexi RRH System fiber SM 110 m
Overallfibre length 110000-0/+2%
Connector2
Connector1
Wiring
Conn.1 Conn.2
A
B
154
B
A
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Figure 106
Nokia Base Station cables and SFPs
FSOQ Flexi RRH System fiber SM 200 m
Overallfibre length 200000-0/+2%
Connector2
Connector1
Wiring
Conn.1 Conn.2
A
B
B
A
Single-mode fibers 90L-90R
Table 103
Single-mode fibers 90L-90R
Name
Product
code
FSOT Flexi SM
fiber 90L-90R 10
m
473081A
Length
10 m
(32.8 ft)
Cable
label
995653
For
SM RFM/RRH
Notes
LC duplex 90° left IP –
LC duplex 90° right IP,
SM
All fiber cables listed in the below tables from Table 104: Single-mode outdoor-outdoor
fibers (Flexible) to Table 117: Single-mode outdoor-outdoor 2 x dual fibers (Flexible) with
2 x (3, 6 and 10 GB) SFP can be connected to both RF Modules and Remote Radio
Heads. System Module compatibility depends on whether the module is an outdoor or
indoor variant. All cables can be routed either left, right or straight, and are halogen-free.
Single-mode outdoor-outdoor fibers (Flexible)
Table 104
Single-mode outdoor-outdoor fibers (Flexible)
Name
Product
code
Length
FUTEY SM OD
fiber LC OD-LC
OD dual 80 m
473537A
80 m
(262.5 ft)
FUTEX SM OD
fiber LC OD-LC
OD dual 150 m
473536A
Cable
label
For
SM RFM/RRH
Notes
SM, LC OD IP-LC OD
IP dual, HF
Flexible ended
150 m
(492.1 ft)
SM RFM/RRH
SM, LC OD IP-LC OD
IP dual, HF
Flexible ended
Single-mode dual indoor-indoor unit-to-unit fibers (Flexible)
DN09142347 Issue: 07
© 2017 Nokia
155
Nokia Base Station cables and SFPs
Table 105
Nokia Base Station Optional Items Description
Single-mode dual indoor-indoor unit-to-unit fibers (Flexible)
Name
Product
code
FUTDF SM OD
fiber LC ID-LC ID
dual 10 m
473291A
FUTDI SM OD
fiber LC ID-LC ID
dual 30 m
473294A
FUTDG SM OD
fiber LC ID-LC ID
dual 50 m
473292A
FUTEI SM OD
fiber LC ID-LC ID
dual 70 m
473513A
FUTDH SM OD
Fiber LC ID-LC ID
dual 80 m
473293A
FUTDJ SM OD
fiber LC ID-LC ID
dual 100 m
473295A
FUTDK SM OD
Fiber LC ID-LC ID
dual 200 m
473296A
Length
10 m
(32.8 ft)
Cable
label
995744
For
ID SM- ID
Radio
Notes
SM, LC ID-LC ID dual,
HF
Flexible ended
30 m
(98.4 ft)
995747
ID SM- ID
Radio
SM, LC ID-LC ID dual,
HF
Flexible ended
50 m (164 995745
ft)
ID SM- ID
Radio
SM, LC ID-LC ID dual,
HF
Flexible ended
70 m
(229.7 ft)
ID SM- ID
Radio
SM, LC ID-LC ID dual,
HF
Flexible ended
80 m
(262.5 ft)
995746
ID SM- ID
Radio
SM, LC ID-LC ID dual,
HF
Flexible ended
100 m
(328.1 ft)
995748
ID SM- ID
Radio
SM, LC ID-LC ID dual,
HF
Flexible ended
200 m
(656.2 ft)
995749
ID SM- ID
Radio
SM, LC ID-LC ID dual,
HF
Flexible ended
Single-mode dual outdoor-indoor unit-to-unit fibers (Flexible)
Table 106
Name
156
Single-mode dual outdoor-indoor unit-to-unit fibers (Flexible)
Product
code
Length
FUFAI SM OD
473278A
fiber LC OD-LC ID
dual 5 m
5 m (16.4
ft)
FUTEQ SM OD
473521A
fiber LC OD-LC ID
dual 30 m
30 m
(98.4 ft)
FUTER SM OD
473524A
fiber LC OD-LC ID
dual 50 m
50 m (164
ft)
Cable
label
995731
For
ID SM RFM/RRH
Notes
SM, LC OD IP -LC ID
dual, HF
Flexible ended
ID SM RFM/RRH
SM, LC OD IP -LC ID
dual, HF
Flexible ended
© 2017 Nokia
ID SM RFM/RRH
SM, LC OD IP -LC ID
dual, HF
Flexible ended
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 106
Name
Nokia Base Station cables and SFPs
Single-mode dual outdoor-indoor unit-to-unit fibers (Flexible) (Cont.)
Product
code
Length
FUTES SM OD
473532A
fiber LC OD-LC ID
dual 70 m
70 m
(229.7 ft)
FUTET SM OD
473533A
fiber LC OD-LC ID
dual100 m
100 m
(328.1 ft)
FUTEU SM OD
473534A
fiber LC OD-LC ID
dual150 m
150 m 150
m (492.1
ft)
Cable
label
For
ID SM RFM/RRH
Notes
SM, LC OD IP -LC ID
dual, HF
Flexible ended
ID SM RFM/RRH
SM, LC OD IP -LC ID
dual, HF
Flexible ended
ID SM RFM/RRH
SM, LC OD IP -LC ID
dual, HF
Flexible ended
Single-mode dual outdoor-indoor unit-to-junction box fibers with FC connector
(Flexible)
Table 107
Name
Single-mode dual outdoor-indoor unit-to-junction box fibers with FC
connector (Flexible)
Product
code
Length
Cable
label
For
Notes
FUFAV SM OD
473401A
fiber LC OD-FC ID
dual 10 m
10 m
(32.8 ft)
OD
SM, LC Dual OD IP - 2
SM/RFM/RRH x FC ID, HF
- junction box
Flexible ended
FUFAZ SM OD
473403A
fiber LC OD-FC ID
dual 30 m
30 m
(98.4 ft)
OD
SM, LC Dual OD IP - 2
SM/RFM/RRH x FC ID, HF
- junction box
Flexible ended
FUFAT SM OD
473289A
fiber LC OD-FC ID
dual 50 m
50 m (164 995742
ft)
OD
SM, LC Dual OD IP - 2
SM/RFM/RRH x FC ID, HF
- junction box
Flexible ended
FUTEJ SM OD
473514A
fiber LC OD-FC ID
dual 70 m
70 m
(229.7 ft)
OD
SM, LC Dual OD IP - 2
SM/RFM/RRH x FC ID, HF
- junction box
Flexible ended
FUFAU SM OD
473290A
fiber LC OD-FC ID
dual 100 m
100 m
(328.1 ft)
995743
OD
SM, LC Dual OD IP - 2
SM/RFM/RRH x FC ID, HF
- junction box
Flexible ended
Single-mode dual indoor-indoor unit-to-junction box fibers with FC connector
(Flexible)
DN09142347 Issue: 07
© 2017 Nokia
157
Nokia Base Station cables and SFPs
Table 108
Nokia Base Station Optional Items Description
Single-mode dual indoor-indoor unit-to-junction box fibers with FC
connector (Flexible)
Name
Product
code
FUTDL SM OD
fiber LC ID-FC ID
dual 10 m
473297A
FUTDN SM OD
fiber LC ID-FC ID
dual 30 m
473299A
FUTDM SM OD
fiber LC ID-FC ID
dual 50 m
473298A
FUTDO SM OD
fiber LC ID-FC ID
dual 80 m
473300A
FUTDP SM OD
fiber LC ID-FC ID
dual 100 m
473301A
Length
10 m
(32.8 ft)
Cable
label
995750
For
ID SM/Radio junction box
Notes
SM, LC Dual ID IP - 2
x FC ID, HF
Flexible ended
30 m
(98.4 ft)
995752
ID SM/Radio junction box
SM, LC Dual ID IP - 2
x FC ID, HF
Flexible ended
50 m (164 995751
ft)
ID SM/Radio junction box
SM, LC Dual ID IP - 2
x FC ID, HF
Flexible ended
80 m
(262.5 ft)
995753
ID SM/Radio junction box
SM, LC Dual ID IP - 2
x FC ID, HF
Flexible ended
100 m
(328.1 ft)
995754
ID SM/Radio junction box
SM, LC Dual ID IP - 2
x FC ID, HF
Flexible ended
Single-mode dual indoor-indoor unit-to-junction box fibers with SC connector
(Flexible)
Table 109
Single-mode dual indoor-indoor unit-to-junction box fibers with SC
connector (Flexible)
Name
158
Product
code
FUTDY SM OD
fiber LC ID-SC ID
dual 10 m
473327A
FUTEA SM OD
fiber LC ID-SC ID
dual 30 m
473328A
FUTEB SM OD
fiber LC ID-SC ID
dual 50 m
473329A
FUTEC SM OD
fiber LC ID-SC ID
dual 80 m
473330A
Length
10 m
(32.8 ft)
Cable
label
995780
For
ID SM/Radio junction box
Notes
SM, LC Dual ID - 2 x
SC ID, HF
Flexible ended
30 m
(98.4 ft)
ID SM/Radio junction box
SM, LC Dual ID - 2 x
SC ID, HF
Flexible ended
50 m (164
ft)
ID SM/Radio junction box
SM, LC Dual ID - 2 x
SC ID, HF
Flexible ended
80 m
(262.5 ft)
ID SM/Radio junction box
SM, LC Dual ID - 2 x
SC ID, HF
Flexible ended
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 109
Nokia Base Station cables and SFPs
Single-mode dual indoor-indoor unit-to-junction box fibers with SC
connector (Flexible) (Cont.)
Name
FUTED SM OD
fiber LC ID-SC ID
dual 100 m
Product
code
Length
473331A
100 m
(328.1 ft)
Cable
label
995784
For
ID SM/Radio junction box
Notes
SM, LC Dual ID - 2 x
SC ID, HF
Flexible ended
Single-mode dual outdoor-indoor unit-to-junction box fibers with SC connector
(Flexible)
Table 110
Single-mode dual outdoor-indoor unit-to-junction box fibers with SC
connector (Flexible)
Name
Product
code
Length
Cable
label
For
Notes
FUFBK SM OD
473313A
fiber LC OD-SC ID
dual 10 m
10 m
(32.8 ft)
995766
OD
SM, LC Dual OD IP - 2
SM/RFM/RRH x SC ID,HF
- junction box
Flexible ended
FUFBJ SM OD
473312A
fiber LC OD-SC ID
dual 30 m
30 m
(98.4 ft)
995765
OD
SM, LC Dual OD IP - 2
SM/RFM/RRH x SC ID,HF
- junction box
Flexible ended
FUFBM SM OD
473315A
fiber LC OD-SC ID
dual 50 m
50 m (164 995768
ft)
OD
SM, LC Dual OD IP - 2
SM/RFM/RRH x SC ID,HF
- junction box
Flexible ended
FUFBL SM OD
473314A
fiber LC OD-SC ID
dual 80 m
80 m
(262.5 ft)
995767
OD
SM, LC Dual OD IP - 2
SM/RFM/RRH x SC ID,HF
- junction box
Flexible ended
FUFBN SM OD
473316A
fiber LC OD-SC ID
dual 100 m
100 m
(328.1 ft)
995769
OD
SM, LC Dual OD IP - 2
SM/RFM/RRH x SC ID,HF
- junction box
Flexible ended
FUTEZ SM OD
473538A
fiber LC OD-SC ID
dual 200 m
200 m
(656.2 ft)
OD
SM, LC Dual OD IP - 2
SM/RFM/RRH x SC ID,HF
- junction box
Flexible ended
Single-mode dual indoor-indoor unit-to-unit fibers (Flexible)
Table 111
Single-mode dual indoor-indoor unit-to-unit fibers (Flexible)
Name
FUFAK SM ID
Fiber LC ID-LC ID
dual 2 m
DN09142347 Issue: 07
Product
code
473280A
Length
2 m (6.6
ft)
© 2017 Nokia
Cable
label
995733
For
Notes
ID SM/radio –
junction
box/radio
SM, LC ID-LC ID dual,
HF
159
Nokia Base Station cables and SFPs
Table 111
Nokia Base Station Optional Items Description
Single-mode dual indoor-indoor unit-to-unit fibers (Flexible) (Cont.)
Name
Product
code
Length
Cable
label
For
Notes
Flexible ended
FUFAH SM ID
fiber LC ID-LC ID
dual 5 m
473277A
FUFAL SM ID
Fiber LC ID-LC ID
dual 10 m
473281A
FUTEG SM ID
fiber LC ID-LC ID
dual 20 m
473511A
FUFAM SM ID
Fiber LC ID-LC ID
dual 30 m
473282A
5 m (16.4
ft)
10 m
(32.8 ft)
995730
995734
20 m
(65.6 ft)
30 m
(98.4 ft)
995735
ID SM/radio –
junction
box/radio
SM, LC ID-LC ID dual,
HF
ID SM/radio –
junction
box/radio
SM, LC ID-LC ID dual,
HF
ID SM/radio –
junction
box/radio
SM, LC ID-LC ID dual,
HF
ID SM/radio –
junction
box/radio
SM, LC ID-LC ID dual,
HF
Flexible ended
Flexible ended
Flexible ended
Flexible ended
Single-mode dual indoor-indoor unit-to-junction box fibers with FC connector
(Flexible)
Table 112
Single-mode dual indoor-indoor unit-to-junction box fibers with FC
connector (Flexible)
Name
Product
code
Length
FUTEF SM ID
fiber LC ID-FC ID
dual 5 m
473510A
5 m (16.4
ft)
FUFAF SM ID
Fiber LC ID-FC ID
dual 10 m
473275A
FUTEE SM ID
fiber LC ID-FC ID
dual 20 m
473509A
FUFAG SM ID
Fiber LC ID-FC ID
dual 30 m
473276A
Cable
label
For
ID SM/radio junction box
Notes
SM, LC Dual ID - 2 x
FC ID, HF
Flexible ended
10 m
(32.8 ft)
995727
ID SM/radio junction box
SM, LC Dual ID - 2 x
FC ID, HF
Flexible ended
20 m
(65.6 ft)
ID SM/radio junction box
SM, LC Dual ID - 2 x
FC ID, HF
Flexible ended
30 m
(98.4 ft)
995729
ID SM/radio junction box
SM, LC Dual ID - 2 x
FC ID, HF
Flexible ended
Single-mode dual indoor-indoor unit-to-junction box fibers with SC connector
(Flexible)
160
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 113
Nokia Base Station cables and SFPs
Single-mode dual indoor-indoor unit-to-junction box fibers with SC
connector (Flexible)
Name
Prodcut
code
FUFBO SM ID
fiber LC ID -SC ID
dual 10 m
473317A
FUTEH SM ID
fiber LC ID-SC ID
dual 20 m
473512A
Length
10 m
(32.8 ft)
Cable
label
995770
For
ID SM/radio junction box
Notes
SM, LC Dual ID - 2 x
SC ID dual, HF
Flexible ended
20 m
(65.6 ft)
ID SM/radio junction box
SM, LC Dual ID - 2 x
SC ID dual, HF
Flexible ended
FUFBP SM ID
473318A
Fiber LC ID-SC ID
dual 30 m
30 m
(98.4 ft)
FUFBQ SM ID
fiber LC ID-SC ID
dual 50 m
50 m (164
ft)
473319A
995771
ID SM/radio junction box
SM, LC Dual ID - 2 x
SC ID dual, HF
Flexible ended
ID SM/radio junction box
SM, LC Dual ID - 2 x
SC ID dual, HF
Flexible ended
FUFBR SM ID
473320A
Fiber LC ID-SC ID
dual 80 m
80 m
(262.5 ft)
FUFBS SM ID
473321A
Fiber LC ID-SC ID
dual 100 m
100 m
(328.1 ft)
995773
ID SM/radio junction box
SM, LC Dual ID - 2 x
SC ID dual, HF
Flexible ended
995774
ID SM/radio junction box
SM, LC Dual ID - 2 x
SC ID dual, HF
Flexible ended
Single-mode single outdoor-indoor fibers for BiDi SFP use (Flexible)
Table 114
Name
DN09142347 Issue: 07
Single-mode single outdoor-indoor fibers for BiDi SFP use (Flexible)
Product
code
Length
Cable
label
FUFCF SM OD
473340A
fiber LC OD-FC ID
single 10 m
10 m
(32.8 ft)
FUFCE SM OD
473339A
fiber LC OD-FC ID
single 30 m
30 m
(98.4 ft)
FUFCD SM OD
473338A
fiber LC OD-FC ID
single 50 m
50 m (164 995806
ft)
FUTEK SM OD
473515A
fiber LC OD-FC ID
single 70 m
70 m
(229.7 ft)
995808
For
Notes
OD SM/radio - SM, LC Simplex OD
junction box
IP-FC ID, HF
Flexible ended
995807
OD SM/radio - SM, LC Simplex OD
junction box
IP-FC ID, HF
Flexible ended
OD SM/radio - SM, LC Simplex OD
junction box
IP-FC ID, HF
Flexible ended
© 2017 Nokia
OD SM/radio - SM, LC Simplex OD
junction box
IP-FC ID, HF
161
Nokia Base Station cables and SFPs
Table 114
Nokia Base Station Optional Items Description
Single-mode single outdoor-indoor fibers for BiDi SFP use (Flexible)
(Cont.)
Name
Product
code
Length
Cable
label
For
Notes
Flexible ended
FUFCC SM OD
473337A
fiber LC OD-FC ID
single 100 m
100 m
(328.1 ft)
995805
OD SM/radio - SM, LC Simplex OD
junction box
IP-FC ID, HF
Flexible ended
Single-mode single indoor-indoor fibers for BiDi SFP use (Flexible)
Table 115
Single-mode single indoor-indoor fibers for BiDi SFP use (Flexible)
Name
Product
code
Length
Cable
label
FUFCK SM OD
473345A
fiber LC OD-SC ID
single 10 m
10 m
(32.8 ft)
995813
FUFCG SM OD
473341A
fiber LC OD-SC ID
single 30 m
30 m
(98.4 ft)
FUFCH SM OD
473342A
fiber LC OD-SC ID
single 50 m
50 m (164 995810
ft)
FUFCJ SM OD
473344A
fiber LC OD-SC ID
single 80 m
80 m
(262.5 ft)
FUFCI SM OD
473343A
fiber LC OD-SC ID
single100 m
100 m
(328.1 ft)
For
ID SM/radio junction box
Notes
SM, LC Simplex ID-SC
ID, HF
Flexible ended
995809
ID SM/radio junction box
SM, LC Simplex ID-SC
ID, HF
Flexible ended
ID SM/radio junction box
SM, LC Simplex ID-SC
ID, HF
Flexible ended
995812
ID SM/radio junction box
SM, LC Simplex ID-SC
ID, HF
Flexible ended
995811
ID SM/radio junction box
SM, LC Simplex ID-SC
ID, HF
Flexible ended
Single-mode indoor-indoor 2 x dual fibers (Flexible) with 2 x (3, 6 and 10 GB) SFP
Table 116
Single-mode indoor-indoor 2 x dual fibers (Flexible) with 2 x (3, 6 and 10
GB) SFP
Name
FUTDA SM OD
fiber LC ID-LC ID
2 x dual 10 m
162
Product
code
473269A
Length
10 m
(32.8 ft)
Cable
label
995719
For
ID SM - radio
Notes
SM, 2 x LC Dual ID - 2
x LC Dual ID, HF
Flexible ended
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 116
Nokia Base Station cables and SFPs
Single-mode indoor-indoor 2 x dual fibers (Flexible) with 2 x (3, 6 and 10
GB) SFP (Cont.)
Name
Product
code
FUTDB SM OD
fiber LC ID-LC ID
2 x dual 30 m
473267A
FUTDC SM OD
fiber LC ID-LC ID
2 x dual 50 m
473266A
FUTDD SM OD
fiber LC ID-LC ID
2 x dual 80 m
473265A
FUTDE SM OD
fiber LC ID-LC ID
2 x dual 100 m
473268A
Length
30 m
(98.4 ft)
Cable
label
995716
For
ID SM - radio
Notes
SM, 2 x LC Dual ID - 2
x LC Dual ID, HF
Flexible ended
50 m (164 995717
ft)
ID SM - radio
SM, 2 x LC Dual ID - 2
x LC Dual ID, HF
Flexible ended
80 m
(262.5 ft)
995714
ID SM - radio
SM, 2 x LC Dual ID - 2
x LC Dual ID, HF
Flexible ended
100 m
(328.1 ft)
995718
ID SM - radio
SM, 2 x LC Dual ID - 2
x LC Dual ID, HF
Flexible ended
Single-mode outdoor-outdoor 2 x dual fibers (Flexible) with 2 x (3, 6 and 10 GB)
SFP
Table 117
Single-mode outdoor-outdoor 2 x dual fibers (Flexible) with 2 x (3, 6 and 10
GB) SFP
Name
FUFAC SM OD
fiber LC OD-LC
OD 2 x dual 10 m
Product
code
473272A
Length
10 m
(32.8 ft)
Cable
label
995723
For
SM RFM/RRH
Notes
SM, 2 x LC Dual OD
IP - 2 x LC Dual OD IP,
HF
Flexible ended
FUFAD SM OD
fiber LC OD-LC
OD 2 x dual 30 m
473273A
30 m
(98.4 ft)
995725
SM RFM/RRH
SM, 2 x LC Dual OD
IP - 2 x LC Dual OD IP,
HF
Flexible ended
FUFAB SM OD
fiber LC OD-LC
OD 2 x dual 50 m
473271A
50 m (164 995721
ft)
SM RFM/RRH
SM, 2 x LC Dual OD
IP - 2 x LC Dual OD IP,
HF
Flexible ended
FUTEV SM OD
fiber LC OD-LC
OD 2 x dual 70 m
473535A
70 m
(229.7 ft)
SM RFM/RRH
SM, 2 x LC Dual OD
IP - 2 x LC Dual OD IP,
HF
Flexible ended
DN09142347 Issue: 07
© 2017 Nokia
163
Nokia Base Station cables and SFPs
Table 117
Nokia Base Station Optional Items Description
Single-mode outdoor-outdoor 2 x dual fibers (Flexible) with 2 x (3, 6 and 10
GB) SFP (Cont.)
Name
FUFAA SM OD
fiber LC OD-LC
OD 2 x dual 80 m
Product
code
Length
473270A
80 m
(262.5 ft)
Cable
label
995720
For
SM RFM/RRH
Notes
SM, 2 x LC Dual OD
IP - 2 x LC Dual OD IP,
HF
Flexible ended
FUFAE SM OD
473274A
fiber LC OD-LC
OD 2 x dual 100 m
100 m
(328.1 ft)
995726
SM RFM/RRH
SM, 2 x LC Dual OD
IP - 2 x LC Dual OD IP,
HF
Flexible ended
Single-mode outdoor-indoor 2 x dual fibers (Flexible) with 2 x (3, 6 and 10 GB) SFP
Table 118
Name
Single-mode outdoor-indoor 2 x dual fibers (Flexible) with 2 x (3, 6 and 10
GB) SFP
Product
code
FUTEL SM OD
473516A
fiber LC OD-LC ID
2 x dual 30 m
Length
Cable
label
30 m
(98.4 ft)
For
SM - radio
Notes
SM, 2 x LC Dual OD
IP - 2 x LC Dual ID,
HF
Flexible ended
FUTEM SM OD
473517A
fiber LC OD-LC ID
2 x dual 50 m
50 m (164
ft)
SM - radio
SM, 2 x LC Dual OD
IP - 2 x LC Dual ID,
HF
Flexible ended
FUTEN SM OD
473518A
fiber LC OD-LC ID
2 x dual 70 m
70 m
(229.7 ft)
SM - radio
SM, 2 x LC Dual OD
IP - 2 x LC Dual ID,
HF
Flexible ended
33.3 Multi-mode fiber cables
Multi-mode optical fiber cables used between System Modules, RF Modules, RRHs and
junction boxes.
Table 119
Name
Multi-mode fibers 90°-90° OM2
Product
code
FSFL MM fiber 90- 472894A
90 2 m
164
Length
2 m (6.6
ft)
© 2017 Nokia
Cable
label
994807
For
SM - RF
M/RRH
Notes
LC 90° left IP - LC 90°
left IP, MM
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 119
Nokia Base Station cables and SFPs
Multi-mode fibers 90°-90° OM2 (Cont.)
Name
Product
code
Length
Cable
label
For
Notes
SM - SM
FSFD Flexi
System fiber D 4
m
471743A
4 m (13.1
ft)
995109
SM - RF
M/RRH
LC 90° left IP - LC 90°
left IP, MM
FSFF Flexi
System fiber F 10
m
471707A
10 m
(32.8 ft)
995138
SM - RF
M/RRH
LC 90° left IP - LC 90°
left IP, MM
FSFG Flexi
System fiber G 20
m
471708A
20 m
(65.6 ft)
995139
SM - RF
M/RRH
LC 90° left IP - LC 90°
left IP, MM
FSFH Flexi
System fiber H 30
m
471709A
30 m
(98.4 ft)
995140
SM - RF
M/RRH
LC 90° left IP - LC 90°
left IP, MM
FSFI Flexi System 471710A
fiber I 40 m
40 m
(131.2 ft)
995141
SM - RF
M/RRH
LC 90° left IP - LC 90°
left IP, MM
FSFB Flexi
System fiber B 50
m
471711A
50 m (164 995092
ft)
SM - RF
M/RRH
LC 90° left IP - LC 90°
left IP, MM + LC-LC
adapter
FSFK Flexi
System fiber K 75
m
471395A
75 m
(246.1 ft)
995142
SM - RF
M/RRH
LC 90° left IP - LC 90°
left IP, MM
FSFC Flexi
System fiber C
100 m
471396A
100 m
(328.1 ft)
995093
SM - RF
M/RRH
LC 90° left IP - LC 90°
left IP, MM + LC-LC
adapter
FSFP Flexi
System fiber P
200 m
471712A
200 m
(656.2 ft)
995143
SM - RF
M/RRH
LC 90° left IP - LC 90°
left IP, MM
FSFO Flexi
System fiber HF 2
m
471851A
2 m (6.6
ft)
995194
SM - RF
M/RRH
LC 90° left IP - LC 90°
left IP, MMhalogenfree + LC-LC adapter
FSFQ Flexi
System fiber HF
50 m
471852A
50 m (164 995195
ft)
SM - RF
M/RRH
LC 90° left IP - LC 90°
left IP, MMhalogenfree + LC-LC adapter
2 m (6.6
ft)
SM - RF
M/RRH
LC 90° left IP - LC 90°
left IP, MM
FSFE Flexi
472131A
System fiber MM 2
m
DN09142347 Issue: 07
© 2017 Nokia
No cable
number
165
Nokia Base Station cables and SFPs
Figure 107
Nokia Base Station Optional Items Description
FSFL MM fiber 90-90 2 m
Overallfibre length 2000
+80
-20
Connector1
Connector2
Wiring
Conn.1 Conn.2
A
B
B
A
Figure 108
FSFF Flexi System fiber F 10 m
Overallfibre length 10000-0/+2%
Connector1
Connector2
Wiring
Conn.1 Conn.2
A
B
166
B
A
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Figure 109
Nokia Base Station cables and SFPs
FSFG Flexi System fiber G 20 m
Overallfibre length 20000 -0/+2%
Connector1
Connector2
Wiring
Conn.1 Conn.2
A
B
B
A
Figure 110
FSFH Flexi System fiber H 30 m
Overallfibre length 30000 -0/+2%
Connector1
Connector2
Wiring
Conn.1 Conn.2
A
B
DN09142347 Issue: 07
B
A
© 2017 Nokia
167
Nokia Base Station cables and SFPs
Figure 111
Nokia Base Station Optional Items Description
FSFI Flexi System fiber I 40 m
Overallfibre length 40000 -0/+2%
Connector1
Connector2
Wiring
Conn.1 Conn.2
A
B
B
A
Figure 112
FSFB Flexi System fiber B 50 m
Overallfibre length 50000 -0/+2%
Connector1
Connector2
Wiring
Conn.1 Conn.2
A
B
168
B
A
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Figure 113
Nokia Base Station cables and SFPs
FSFK Flexi System fiber K 75 m
Overallfibre length 75000 -0/+2%
Connector1
Connector2
Wiring
Conn.1 Conn.2
A
B
B
A
Figure 114
FSFC Flexi System fiber C 100 m
Overallfibre length 100000 -0/+2%
Connector1
Connector2
Wiring
Conn.1 Conn.2
A
B
DN09142347 Issue: 07
B
A
© 2017 Nokia
169
Nokia Base Station cables and SFPs
Figure 115
Nokia Base Station Optional Items Description
FSFP Flexi System fiber P 200 m
Overallfibre length 200000 -0/+2%
Connector1
Connector2
Wiring
Conn.1 Conn.2
A
B
B
A
Figure 116
FSFO Flexi System fiber HF 2 m
Overallfibre length 2000
Connector1
+80
-20
Connector2
Wiring
Conn.1 Conn.2
A
B
170
B
A
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Figure 117
Nokia Base Station cables and SFPs
FSFQ Flexi System fiber HF 50 m
Overallfibre length 50000 -0/+2%
Connector1
Connector2
Wiring
Conn.1 Conn.2
A
B
B
A
Figure 118
FSFE Flexi System fiber MM 2 m
+80
Overallfibre length 2000 -20
Connector1
Connector2
Wiring
Conn.1 Conn.2
A
B
B
A
Table 120
Name
DN09142347 Issue: 07
Multi-mode fibers 90°-90° OM3
Product
code
Length
FSFM OM3 MM
472844A
fiber 90-90, 100 m
100 m
(328.1 ft)
FSFN OM3 MM
472845A
fiber 90-90, 200 m
200 m
(656.2 ft)
© 2017 Nokia
Cable
label
For
Notes
995533
3 Gb or 6 Gb,
SM RFM/RRH
LC 90° left IP - LC 90°
left IP, MM OM3
995537
3 Gb or 6 Gb,
SM RFM/RRH
LC 90° left IP - LC 90°
left IP, MM OM3
171
Nokia Base Station cables and SFPs
Figure 119
Nokia Base Station Optional Items Description
FSFN OM3 MM fiber 90-90, 200 m
Overallfibre length 200000 -0/+2%
Connector1
Connector2
Wiring
Conn.1 Conn.2
A
B
B
A
Table 121
Multi-mode fibers 0°-90° OM2
Name
172
Product
code
Length
Cable
label
For
Notes
FSOA Flexi RRH
System fiber MM
10 m
472066A
10 m
(32.8 ft)
995271
SM - RRH
LC 0° IP - LC 90° left
IP, MM
FSOB Flexi RRH
System fiber MM
20 m
472134A
20 m
(65.6 ft)
995287
SM - RRH
LC 0° IP - LC 90° left
IP, MM
FSOC Flexi RRH
System fiber MM
30 m
472135A
30 m
(98.4 ft)
995286
SM - RRH
LC 0° IP - LC 90° left
IP, MM
FYTF Flexi RRH
System fiber MM
50 m
471964A
50 m (164 995251
ft)
SM - RRH
LC 0° IP - LC 90° left
IP, MM
FSOE Flexi RRH
System fiber MM
75 m
472136A
75 m
(246.1 ft)
995285
SM - RRH
LC 0° IP - LC 90° left
IP, MM
FYTG Flexi RRH
System fiber MM
100 m
471965A
100 m
(328.1 ft)
995252
SM - RRH
LC 0° IP - LC 90° left
IP, MM
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Figure 120
Nokia Base Station cables and SFPs
FSOA Flexi RRH System fiber MM 10 m
Overallfibre length 10000-0/+2%
Connector2
Connector1
Wiring
Conn.1 Conn.2
A
B
B
A
Figure 121
FSOB Flexi RRH System fiber MM 20 m
Overallfibre length 20000-0/+2%
Connector2
Connector1
Wiring
Conn.1 Conn.2
A
B
DN09142347 Issue: 07
B
A
© 2017 Nokia
173
Nokia Base Station cables and SFPs
Figure 122
Nokia Base Station Optional Items Description
FSOC Flexi RRH System fiber MM 30 m
Overallfibre length 30000-0/+2%
Connector2
Connector1
Wiring
Conn.1 Conn.2
A
B
B
A
Figure 123
FSOE Flexi RRH System fiber MM 75 m
Overallfibre length 75000-0/+2%
Connector2
Connector1
Wiring
Conn.1 Conn.2
A
B
174
B
A
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Figure 124
Nokia Base Station cables and SFPs
FYTG Flexi RRH System fiber MM 100 m
Overallfibrelength100000-0/+2%
Connector2
Connector1
Wiring
Conn.1 Conn.2
A
B
B
A
Table 122
Multi-mode fibers 90L-90R
Name
Product
code
473078A
Length
Cable
label
For
Notes
FSFS MM 2 m (6.6
fiber 90L- ft)
90R 2 m
995649
473079A
FSFT MM
fiber 90L90R 4 m
995650
SM RFM/RRH
LC duplex 90° left IP LC duplex 90° right IP,
MM
473086A
FSFV MM 10 m
fiber 90L- (32.8 ft)
90R 10 m
995651
SM RFM/RRH
LC duplex 90° left IP LC duplex 90° right IP,
MM
473080A
FSFU MM 20 m
fiber 90L- (65.5 ft)
90R 20 m
995652
SM RFM/RRH
LC duplex 90° left IP LC duplex 90° right IP,
MM
Table 123
4 m (13.1
ft)
SM RFM/RRH
SM - SM
LC duplex 90° left IP LC duplex 90° right IP,
MM
Multi-mode fibers straight (0°-0° OM2)
Name
FSOD MM fiber,
straight ends, 4 m
Product
code
Length
472842A
4 m (13.1
ft)
Cable
label
995525
For
RRH-RRH
Notes
LC duplex 0° IP - LC
duplex 0° IP, MM
All fiber cables listed in the below tables can be connected to both RF Modules and
Remote Radio Heads. System Module compatibility depends on whether the module is
an outdoor or indoor variant. Halogen-free, all cables are flexible-ended and can be
routed either left, right or straight. The minimum bend radius is 50 mm (1.97 in.).
DN09142347 Issue: 07
© 2017 Nokia
175
Nokia Base Station cables and SFPs
Table 124
Nokia Base Station Optional Items Description
Multi-mode dual indoor-indoor unit-to-unit fibers (Flexible)
Name
Product
code
FUFAO MM ID
fiber LC ID-LC ID
dual 2 m
473284A
FUFAP MM ID
fiber LC ID-LC ID
dual 5 m
473285A
Table 125
Length
Cable
label
2 m (6.6
ft)
5 m (16.4
ft)
995738
For
Notes
ID SM/radio–
junction
box/radio
MM, LC ID-LC ID dual,
HF
ID SM/radio–
junction
box/radio
MM, LC ID-LC ID dual,
HF
Flexible ended
Flexible ended
Multi-mode outdoor-outdoor OM2 fibers (Flexible)
Name
FUFAR MM OD
fiber LC OD-LC
OD dual 5 m
Product
code
Length
473287A
5 m (16.4
ft)
Cable
label
995740
For
SM RFM/RRH
Notes
MM, LC dual OD IPLC OD IP dual,
HF,OM2
Flexible ended
Table 126
Multi-mode outdoor-outdoor OM3 fibers (Flexible)
Name
Product
code
FUFBV MM OM3 473767A
OD FO LC OD-LC
OD dual 150 m
Length
150 m
(492 ft)
Cable
label
996020
For
SM RFM/RRH
Notes
MM, LC dual OD IPLC OD IP dual,
HF,OM3
Flexible ended
FUFBX MM OM3
OD FO LC ID-LC
OD dual 150 m
473768A
FUFBZ MM OM3
OD FO LC ID-LC
OD dual 200 m
473769A
Table 127
996021
SM RFM/RRH
MM, LC dual ID-LC
OD IP dual, HF,OM3
Flexible ended
200 m
(656.2 ft)
996022
SM RFM/RRH
MM, LC dual ID-LC
OD IP dual, HF,OM3
Flexible ended
Multi-mode dual indoor-indoor unit-to-unit fibers (Flexible)
Name
176
150 m
(492 ft)
Product
code
Length
Cable
label
For
Notes
FUTDT MM OD
fiber LC ID-LC ID
dual 10 m
473325A
10 m
(32.8 ft)
995778
ID SM - ID
radio
MM, LC ID-LC ID dual,
HF
FUTDS MM OD
fiber LC ID-LC ID
dual 30 m
473324A
30 m
(98.4 ft)
995777
ID SM - ID
radio
MM, LC ID-LC ID dual,
HF
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 127
Nokia Base Station cables and SFPs
Multi-mode dual indoor-indoor unit-to-unit fibers (Flexible) (Cont.)
Name
Product
code
Length
FUTDQ MM OD
fiber LC ID-LC ID
dual 50m
473322A
50 m (164
ft)
FUTDR MM OD
fiber LC ID-LC ID
dual 100 m
473323A
100 m
(328.1 ft)
FUTDU MM OD
fiber LC ID-LC ID
dual 150 m
473326A
150 m
(492 ft)
Table 128
Cable
label
995776
For
Notes
ID SM - ID
radio
MM, LC ID-LC ID dual,
HF
ID SM - ID
radio
MM, LC ID-LC ID dual,
HF
ID SM - ID
radio
MM, LC ID-LC ID dual,
HF
Multi-mode dual outdoor-outdoor unit-to-unit fibers (Flexible)
Name
Product
code
Length
FUFAQ MM OD
473286A
fiber LC OD-LC ID
dual 5 m
5 m (16.4
ft)
FUFBT MM OD
fiber LC ID-LC ID
dual 10 m
473332A
10 m
(32.8 ft)
FUFBU MM OD
fiber LC ID-LC ID
dual 30 m
473333A
Cable
label
995739
For
ID SMRFM/RRH
Notes
MM, LC OD IP-LC ID
dual, HF
Flexible ended
ID SMRFM/RRH
MM, LC OD IP-LC ID
dual, HF
Flexible ended
30 m
(98.4 ft)
ID SMRFM/RRH
MM, LC OD IP-LC ID
dual, HF
Flexible ended
FUFBY MM OD
473334A
fiber LC ID-LC OD
dual 50 m
50 m (164 995787
ft)
FUFCB MM OD
473336A
fiber LC ID-LC OD
dual 80 m
80 m
(262.5 ft)
FUFCA MM OD
473335A
fiber LC ID-LC OD
dual 100 m
100 m
(328.1 ft)
ID SMRFM/RRH
MM, LC OD IP-LC ID
dual, HF
Flexible ended
995789
ID SMRFM/RRH
MM, LC OD IP-LC ID
dual, HF
Flexible ended
995788
ID SMRFM/RRH
MM, LC OD IP-LC ID
dual, HF
Flexible ended
33.4 Small form-factor pluggable transceivers (SFPs)
g
Note: Only Nokia proprietary SFPs must be used for all optical connections (both
single-mode and multi-mode) to connect System Module and Radio Module. Any
exception to this rule requires a written Nokia product management approval.
3 Gbit SFPs
DN09142347 Issue: 07
© 2017 Nokia
177
Nokia Base Station cables and SFPs
Table 129
Nokia Base Station Optional Items Description
3 Gbit SFPs
3 Gbit SFPs:
•
ESMB/C and FSMC/D/E <-> all radio modules
•
FSMF <-> radio modules with 3 Gbit OBSAI RP3
Name
Product
code
FOSG Flexi Optical
SFP G 850 nm 3 Gb
200 m MM
472063A
FOSL Flexi Optical
SFP L 1310 nm 3 Gb
2 km SM
472807A
FOSA Flexi Optical
SFP A 1310 nm 3 Gb
15 km SM
471546A
Length
For
up to
200 m
(656.2
ft)
SM - RFM
up to 2
km (1.2
m)
SM - RFM
SM - SM
SM - SM
up to 15 SM - RFM
km (9.3
SM - SM
m)
Notes
3 Gbit Multi-mode SFP 850
nm for OBSAI, two needed
per connection, LC PC
connector
3 Gbit Single-mode SFP
1310 nm for OBSAI, two
needed per connection, LC
PCF connector
3 Gbit Single-mode SFP
1310 nm for OBSAI, two
needed per connection, LC
PC connector
6 Gbit SFPs
Table 130
6 Gbit SFPs
6 Gbit SFPs:
FSMF <-> radio modules with 6 Gbit OBSAI RP3
•
Name
Product
code
Length
For
up to
300 m
(984.3
ft)
SM - RFM
up to 2
km (1.2
m)
SM - RFM
Notes
FOSH Optical SFP H
850 nm 6 Gb 300 m
MM
472579A
FOSN Optical SFP N
1310 nm 6 Gb 2 km
SM
472811A
FOSI Optical SFP I
1310 nm 6 Gb 15 km
SM
472580A
up to 15 SM - RFM
km (9.3
SM - SM
m)
6 Gbit Single-mode SFP
1310 nm for OBSAI, two
needed per connection, LC
PC connector
FOSQ Flexi Optical Q 473063A
SFP 1310 nm 6 Gb 40
km
up to 40 SM - RFM
km
SM - SM
(24.9
m)
6 Gbit Single-mode SFP
1310 nm for OBSAI, two
needed per connection, LC
PC connector
SM - SM
SM - SM
6 Gbit Multi-mode SFP 850
nm for OBSAI, two needed
per connection, LC PC
connector
6 Gbit Single-mode SFP
1310 nm for OBSAI, two
needed per connection, LC
PC connector
1 Gbit transmission SFPs
178
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 131
Nokia Base Station cables and SFPs
1 Gbit transmission SFPs
1 Gbit transmission SFPs:
BTS <-> BSC/RNC/MME
•
Name
FOSD Flexi Optical
Telecom SFP GbE
850 nm MM
Product
code
471881A
Length
See
Notes
For
FTIA/B FTJA,
FTLB, FIQA/B,
FSMF
Notes
1 Gbit Multi-mode SFP 850
nm for transport backhaul,
two needed per connection,
LC PC connector
550 m on 50/125 μm & 300
m on 62.5/125 μm multimode fiber
FOSC Flexi Optical
Telecom SFP GbE
1310 nm MM
471880A
See
Notes
FTIA/B FTJA,
FTLB, FIQA/B,
FSMF
1 Gbit Single-mode SFP
1310 nm for transport
backhaul, two needed per
connection, LC PC
connector
10 km on 9/125 μm singlemode fiber
9.8 Gbit/6 Gbit dual speed SFPs
Table 132
9.8 Gbit/6 Gbit dual speed SFPs
9.8 Gbit/6 Gbit dual speed SFPs:
FSIH <-> RRU with 9.8 Gbit CPRI
•
Name
Product
code
Length
For
Notes
FOSO Optical SFP
472948A
1310 nm 9.8G/6G dual
speed 1.4 km SM
up to
1.4 km
(0.9 m)
FSIH, RRU with
9.8 Gbit CPRI
9.8 Gbit/6 Gbit dual speed
Single-mode SFP 1310 nm,
two needed per connection
FOSP Optical SFP
472949A
1310 nm 9.8G/6G dual
speed 10 km SM
up to 10 FSIH, RRU with
km (6.2 9.8 Gbit CPRI
m)
9.8 Gbit/6 Gbit dual speed
Single-mode SFP 1310 nm,
two needed per connection
6 Gbit BiDi SFPs
Table 133
6 Gbit BiDi SFPs
6 Gbit BiDi SFPs:
FSMF to rel 3 Radio (6 Gbit OBSAI RP3)
•
Name
FOST Flexi Optical
SFP 1330 nm 6 G 20
km SM
DN09142347 Issue: 07
Product
code
473063A
Length
For
up to 20 SM - RFM/RRH
km
(12.4
m)
© 2017 Nokia
Notes
6 Gbit bidirectional mode
SFP 1310 nm for OBSAI,
two needed per connection,
LC PC duplex connector
179
Nokia Base Station cables and SFPs
Table 133
Nokia Base Station Optional Items Description
6 Gbit BiDi SFPs (Cont.)
6 Gbit BiDi SFPs:
FSMF to rel 3 Radio (6 Gbit OBSAI RP3)
•
Name
Product
code
Length
For
Notes
FOSV Flexi Optical
473207A
SFP 1270 nm 6 Gb 20
km SM
up to 20 SM - RFM/RRH
km
(12.4
m)
6 Gbit bidirectional mode
SFP 1270 nm for OBSAI,
two needed per connection,
LC PC duplex connector
FORD Optical SFP D
1470 nm 6 GB 40
473423A
up to 40 SM - RFM/RRH
km
(24.9
m)
6 Gbit Single-mode SFP
bidirectional
Tx1470/Rx1530 nm for
OBSAI, two needed per
connection, LC PC duplex
connector
FORE Optical SFP E
1530 nm 6 GB 20
473424A
up to 20 SM - RFM/RRH
km
(12.4
m)
6 Gbit Single-mode SFP
bidirectional
Tx1530/Rx1470 nm for
OBSAI, two needed per
connection, LC PC duplex
connector
2.5/3GB BiDi SFPs
Table 134
2.5/3GB BiDi SFPs
2.5/3GB BiDi SFPs:
•
FSMF to rel 3 Radio 3 (3 Gbit OBSAI RP3) (2.5 Gbit applicable for CPRI and 3 Gbit for
OBSAI)
Name
180
Product
code
Length
For
Notes
FOSX Flexi Optical
473208A
SFP 1490 nm 2.5/3GB
20
up to 20 SM - RFM/RRH
km
(12.4
m)
2.5/3GB Gbit bidirectional
mode SFP 1270 nm for
OBSAI, two needed per
connection, LC PC duplex
connector
FOSZ Flexi Optical
473209A
SFP 1310 nm 2.5/3GB
20
up to 20 SM - RFM/RRH
km
(12.4
m)
2.5/3GB Gbit bidirectional
mode SFP 1310 nm for
OBSAI, two needed per
connection, LC PC duplex
connector
FORB Optical SFP B
1470 nm 3.072GB 40
473411A
up to 40 SM - RFM/RRH
km
(24.9
m)
3 Gbit Single-mode SFP
bidirectional
Tx1470/Rx1530 nm for
OBSAI, two needed per
connection, LC PC duplex
connector
FORC Optical SFP C
1530 nm 3.072GB 40
473412A
up to 40 SM - RFM/RRH
km
(24.9
m)
3 Gbit Single-mode SFP
bidirectional
Tx1530/Rx1470 nm for
OBSAI, two needed per
connection, LC PC duplex
connector
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 134
Nokia Base Station cables and SFPs
2.5/3GB BiDi SFPs (Cont.)
2.5/3GB BiDi SFPs:
•
FSMF to rel 3 Radio 3 (3 Gbit OBSAI RP3) (2.5 Gbit applicable for CPRI and 3 Gbit for
OBSAI)
Name
DN09142347 Issue: 07
Product
code
Length
For
Notes
FORF Optical SFP F
1310 nm 3.072GB 20
473413A
up to 20 SM - RFM/RRH
km
(12.4
m)
3 Gbit Single-mode SFP
bidirectional
Tx1310/Rx1510 nm for
OBSAI, two needed per
connection, LC PC duplex
connector
FORG Optical SFP G
1510 nm 3.072GB 20
473414A
up to 20 SM - RFM/RRH
km
(12.4
m)
3 Gbit Single-mode SFP
bidirectional
Tx1510/Rx1310 nm for
OBSAI, two needed per
connection, LC PC duplex
connector
FORH Optical SFP H
1470 nm 3.072GB 20
473415A
up to 20 SM - RFM/RRH
km
(12.4
m)
3 Gbit Single-mode SFP
bidirectional
Tx1470/Rx1530 nm for
OBSAI, two needed per
connection, LC PC duplex
connector
FORI Optical SFP I
1530 nm 3.072GB 20
473417A
up to 20 SM - RFM/RRH
km
(12.4
m)
3 Gbit Single-mode SFP
bidirectional
Tx1530/Rx1470 nm for
OBSAI, two needed per
connection, LC PC duplex
connector
FORJ Optical SFP J
1550 nm 3.072GB 20
473418A
up to 20 SM - RFM/RRH
km
(12.4
m)
3 Gbit Single mode SFP
bidirectional
Tx1550/Rx1610 nm for
OBSAI, two needed per
connection, LC PC duplex
connector
FORK Optical SFP K
1610 nm 3.072GB 20
473419A
up to 20 SM - RFM/RRH
km
(12.4
m)
3 Gbit Single-mode SFP
bidirectional Tx1610/Rx
1550 nm for OBSAI, two
needed per connection, LC
PC duplex connector
FORL Optical SFP L
1350 nm 3.072GB 20
473420A
up to 20 SM - RFM/RRH
km
(12.4
m)
3 Gbit Single mode SFP
bidirectional
Tx1350/Rx1490 nm for
OBSAI, two needed per
connection, LC PC duplex
connector
FORM Optical SFP M
1490 nm 3.072GB 20
473421A
up to 20 SM - RFM/RRH
km
(12.4
m)
3 Gbit Single mode SFP
bidirectional
Tx1490/Rx1350 nm for
OBSAI, two needed per
connection, LC PC duplex
connector
FORN Optical SFP N
1350 nm 3.072GB 20
473422A
up to 20 SM - RFM/RRH
km
3 Gbit Single-mode SFP
Single wavelength
© 2017 Nokia
181
Nokia Base Station cables and SFPs
Table 134
Nokia Base Station Optional Items Description
2.5/3GB BiDi SFPs (Cont.)
2.5/3GB BiDi SFPs:
FSMF to rel 3 Radio 3 (3 Gbit OBSAI RP3) (2.5 Gbit applicable for CPRI and 3 Gbit for
OBSAI)
•
Name
Product
code
Length
For
(12.4
m)
Notes
bidirectional Tx/Rx 1350 nm
for OBSAI, two needed per
connection, LC PC duplex
connector
Optical Interface support with FSMF + RFM/RRH
Figure 125
Optical Interface support with FSMF + RFM/RRH 3 Gbit OBSAI
FSMF
OBSAIlink
RRH/RFM3GB
OBSAI
OM2cablewith6Gbmaxdistance100m
OM3cablerequiredbeyond100mwith6GbSFP
Table 135
Optical Interface support with FSMF + RFM/RRH 3 Gbit OBSAI
FSMF
RFM/RRH 3 Gbit OBSAI
OBSAI link bit rate
SFP 3 Gbit
SFP 3 Gbit
3 Gbit supported
SFP 6 Gbit
SFP 6 Gbit
3 Gbit supported
SFP 3 Gbit
SFP 6 Gbit
Not supported
SFP 6 Gbit
SFP 3 Gbit
Not supported
3-sector RF Module
•
FRGP, FRGF, FXFA, FXFB, FXEA, FRIE, FXCA, FRHA, FXDA, FRKA, FRBA, FRBB,
FRMA, FRMD
RRH
•
182
FXEA, FHCA, FRHB, FHDA, FRLB, FRMB
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Figure 126
Nokia Base Station cables and SFPs
Optical Interface support with FSMF + RFM/RRH 6 Gbit OBSAI
FSMF
OBSAIlink
RRH/RFM6GB
OBSAI
OM2cablewith6Gbmaxdistance100m
OM3cablerequiredbeyond100mwith6GbSFP
Table 136
Optical Interface support with FSMF + RFM/RRH 6 Gbit OBSAI
FSMF
RFM/RRH 6 Gbit OBSAI
OBSAI link bit rate
SFP 3 Gbit
SFP 3 Gbit
3 Gbit supported
SFP 6 Gbit
SFP 6 Gbit
6 Gbit supported
SFP 3 Gbit
SFP 6 Gbit
Not supported
SFP 6 Gbit
SFP 3 Gbit
Not supported
3-sector RF Module
•
FRGT, FRGS, FXFC, FXEB, FXCB, FXDB
RRH
•
FRGU, FXED, FRII, FRHC, FRHF, FRMC, FRPA, FRPB, FRGY, FHEB, FHDB
Optical Interface support with FSMF + FSMF
Figure 127
Optical Interface support with FSMF + FSMF
FSMF
OBSAIlink
OBSAIlink
SRIO link
FSMF
2xMultimodeFSFL cables with6Gb SFP max distance2 m forOBSAI
1xMultimode FSFL cable with6GbSFP maxdistance2mforSRIO
For information on FSFL, see Multi-mode fiber cables.
Table 137
Optical Interface support with FSMF + FSMF
FSMF
SFP 6 Gbit FOSH
FSMF
SFP 6 Gbit FOSH
Link bit rate
OBSAI and SRIO: 6 Gbit multimode supported only
Optical Interface support with FSMC/D/E or ESMB/C + RFM/RRH
DN09142347 Issue: 07
© 2017 Nokia
183
Nokia Base Station cables and SFPs
Figure 128
Nokia Base Station Optional Items Description
Optical Interface support with FSMC/D/E or ESMB/C + RFM/RRH 3 Gbit
OBSAI
FSMC/D/E(rel2)
ESMB/C
OBSAIlink
RRH/RFM3GB
OBSAI
OM2cablewith6Gbmaxdistance100m
OM3cablerequiredbeyond100mwith6GbSFP
Table 138
Optical Interface support with FSMC/D/E or ESMB/C + RFM/RRH 3 Gbit
OBSAI
FSMC/D/E or ESMB/C
RFM/RRH 3 Gbit OBSAI
OBSAI link bit rate
SFP 3 Gbit
SFP 3 Gbit
3 Gbit supported
SFP 6 Gbit
SFP 6 Gbit
3 Gbit supported
SFP 3 Gbit
SFP 6 Gbit
Not supported
SFP 6 Gbit
SFP 3 Gbit
Not supported
3-sector RF Module
•
FRGP, FRGF, FXFA, FXFB, FXEA, FRIE, FXCA, FRHA, FXDA, FRKA, FRBA, FRBB,
FRMA, FRMD
RRH
•
FXEA, FHCA, FRHB, FHDA, FRLB, FRMB
Figure 129
Optical Interface support with FSMC/D/E or ESMB/C + RFM/RRH 6 Gbit
OBSAI
FSMC/D/E(rel2)
ESMB/C
OBSAIlink
RRH/RFM6GB
OBSAI
OM2cablewith6Gbmaxdistance100m
OM3cablerequiredbeyond100mwith6GbSFP
Table 139
Optical Interface support with FSMF + RFM/RRH 6 Gbit OBSAI
FSMC/D/E or ESMB/C
184
RFM/RRH 6 Gbit OBSAI
OBSAI link bit rate
SFP 3 Gbit
SFP 3 Gbit
3 Gbit supported
SFP 6 Gbit
SFP 6 Gbit
3 Gbit supported
SFP 3 Gbit
SFP 6 Gbit
Not supported
SFP 6 Gbit
SFP 3 Gbit
Not supported
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Nokia Base Station cables and SFPs
3-sector RF Module
•
FRGT, FRGS, FXFC, FXEB, FXCB, FXDB
RRH
•
FRGU, FXED, FRII, FRHC, FRHF, FRMC, FRPA, FRPB, FRGY, FHEB, FHDB
Optical Interface support with FSIH + RFM/RRH
Figure 130
Optical Interface support with FSIH + RFM/RRH
OBSAIlink
CPRIlink
IRlink
FSIH
Table 140
RRH/RFM6/9.8GB
OBSAI
Optical Interface support with FSIH + RFM/RRH
FSIH
RFM/RRH 6/9.8 Gbit OBSAI
OBSAI link bit rate
SFP 6 Gbit
SFP 6 Gbit
6 Gbit supported
SFP 9.8 Gbit
SFP 9.8 Gbit
9.8 Gbit supported
SFP 3 Gbit
SFP 3 Gbit
Not supported
SFP 3 Gbit
SFP 3 Gbit
Not supported
SFP 6 Gbit
SFP 3 Gbit
Not supported
SFP 9.8 Gbit
SFP 6 Gbit
Not supported
SFP 6 Gbit
SFP 9.8 Gbit
Not supported
OBSAI link
•
•
RF Module: FZHA
8-pipe RRH: FZHJ, FZHI
CPRI link
•
•
RF Module: N/A
8-pipe RRH: FZHM
IR link
•
•
•
•
RF Module: N/A
8-pipe RRH: FZFA, FZFD, FZFF
2-pipe RRH: FZFE, FZND, FZHG, FZHO, FZHP
1-pipe RRH: FZNN, FZNK, FZNL
Optical Interface support with ESMB/C + FSMC/D/E + RFM/RRH
DN09142347 Issue: 07
© 2017 Nokia
185
Nokia Base Station cables and SFPs
Figure 131
Nokia Base Station Optional Items Description
Optical Interface support with ESMB/C + FSMC/D/E + RFM/RRH
ESMB/C
OBSAIlink
RRH/RFM3/6GB
OBSAI
OBSAIlink
OBSAIlink
FSMC/D/E
OM2cablewith6Gbmaxdistance100m
OM3cablerequiredbeyond100mwith6GbSFP
Table 141
Optical Interface support with ESMB/C + FSMC/D/E + RFM/RRH
ESMB/C
RFM/RRH
3/6 Gbit
OBSAI
FSMC/D/E
RFM/RRH
3/6 Gbit
OBSAI
ESMB/C
FSMC/D/E
OBSAI link
bit rate
SFP 3 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 3 Gbit
3 Gbit
supported
SFP 6 Gbit
SFP 6 Gbit
SFP 6 Gbit
SFP 6 Gbit
SFP 6 Gbit
SFP 6 Gbit
3 Gbit
supported
SFP 3 Gbit
SFP 3 Gbit
SFP 6 Gbit
SFP 6 Gbit
SFP 3 Gbit
SFP 3 Gbit
3 Gbit
supported
SFP 6 Gbit
SFP 6 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 6 Gbit
SFP 6 Gbit
3 Gbit
supported
SFP 3 Gbit
SFP 6 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 6 Gbit
Not
supported
SFP 3 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 6 Gbit
SFP 3 Gbit
SFP 6 Gbit
Not
supported
SFP 3 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 6 Gbit
Not
supported
SFP 6 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 6 Gbit
Not
supported
SFP 3 Gbit
SFP 6 Gbit
SFP 6 Gbit
SFP 6 Gbit
SFP 6 Gbit
SFP 6 Gbit
Not
supported
SFP 6 Gbit
SFP 6 Gbit
SFP 3 Gbit
SFP 6 Gbit
SFP 6 Gbit
SFP 6 Gbit
Not
supported
3-sector RF Module
186
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
•
•
Nokia Base Station cables and SFPs
FRGP, FRGF, FXFA, FXFB, FXEA, FRIE, FXCA, FRHA, FXDA, FRKA, FRBA, FRBB,
FRMA, FRMD
FRGT, FRGS, FXFC, FXEB, FXCB, FXDB
RRH
•
•
FXEA, FHCA, FRHB, FHDA, FRLB, FRMB
FRGU, FXED, FRII, FRHC, FRHF, FRMC, FRPA, FRPB, FRGY, FHEB, FHDB
Optical Interface support with ESMB/C + FSMF + RFM/RRH
Figure 132
Optical Interface support with ESMB/C + FSMF + RFM/RRH
ESMB/C
OBSAIlink
RRH/RFM3/6GB
OBSAI
OBSAIlink
OBSAIlink
FSMF
OM2cablewith6Gbmaxdistance100m
OM3cablerequiredbeyond100mwith6GbSFP
Table 142
DN09142347 Issue: 07
Optical Interface support with ESMB/C + FSMF + RFM/RRH
ESMB/C
RFM/RRH
3/6 Gbit
OBSAI
SFP 3 Gbit
SFP 3 Gbit
SFP 6 Gbit
FSMF
RFM/RRH
3/6 Gbit
OBSAI
ESMB/C
SFP 3 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 3 Gbit
3 Gbit
supported
SFP 6 Gbit
SFP 6 Gbit
SFP 6 Gbit
SFP 6 Gbit
SFP 6 Gbit
3 Gbit and 6
Gbit
supported
SFP 3 Gbit
SFP 3 Gbit
SFP 6 Gbit
SFP 6 Gbit
SFP 3 Gbit
SFP 3 Gbit
3 Gbit and 6
Gbit
supported
SFP 6 Gbit
SFP 6 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 6 Gbit
SFP 6 Gbit
3 Gbit
supported
SFP 3 Gbit
SFP 6 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 6 Gbit
Not
supported
SFP 3 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 6 Gbit
SFP 3 Gbit
SFP 6 Gbit
Not
supported
© 2017 Nokia
FSMF
OBSAI link
bit rate
187
Nokia Base Station cables and SFPs
Table 142
Nokia Base Station Optional Items Description
Optical Interface support with ESMB/C + FSMF + RFM/RRH (Cont.)
ESMB/C
RFM/RRH
3/6 Gbit
OBSAI
SFP 3 Gbit
SFP 3 Gbit
SFP 6 Gbit
FSMF
RFM/RRH
3/6 Gbit
OBSAI
ESMB/C
FSMF
OBSAI link
bit rate
SFP 3 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 6 Gbit
Not
supported
SFP 3 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 6 Gbit
Not
supported
SFP 3 Gbit
SFP 6 Gbit
SFP 6 Gbit
SFP 6 Gbit
SFP 6 Gbit
SFP 6 Gbit
Not
supported
SFP 6 Gbit
SFP 6 Gbit
SFP 3 Gbit
SFP 6 Gbit
SFP 6 Gbit
SFP 6 Gbit
Not
supported
3-sector RF Module
•
•
FRGP, FRGF, FXFA, FXFB, FXEA, FRIE, FXCA, FRHA, FXDA, FRKA, FRBA, FRBB,
FRMA, FRMD
FRGT, FRGS, FXFC, FXEB, FXCB, FXDB
RRH
•
•
FXEA, FHCA, FRHB, FHDA, FRLB, FRMB
FRGU, FXED, FRII, FRHC, FRHF, FRMC, FRPA, FRPB, FRGY, FHEB, FHDB
Optical Interface support with FSMC/D/E + FSMF + RFM/RRH
Figure 133
Optical Interface support with FSMC/D/E + FSMF + RFM/RRH
FSMC/D/E
OBSAIlink
RRH/RFM3/6GB
OBSAI
OBSAIlink
FSMF
OM2cablewith6Gbmaxdistance100m
OM3cablerequiredbeyond100mwith6GbSFP
188
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 143
Nokia Base Station cables and SFPs
Optical Interface support with FSMC/D/E + FSMF + RFM/RRH
FSMC/D/E
RFM/RRH
3/6 Gbit
OBSAI
SFP 3 Gbit
SFP 3 Gbit
SFP 6 Gbit
FSMF
RFM/RRH
3/6 Gbit
OBSAI
FSMC/D/E
FSMF
OBSAI link
bit rate
SFP 3 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 3 Gbit
3 Gbit
supported
SFP 6 Gbit
SFP 6 Gbit
SFP 6 Gbit
SFP 6 Gbit
SFP 6 Gbit
3 Gbit and 6
Gbit
supported
SFP 3 Gbit
SFP 3 Gbit
SFP 6 Gbit
SFP 6 Gbit
SFP 3 Gbit
SFP 3 Gbit
3 Gbit and 6
Gbit
supported
SFP 6 Gbit
SFP 6 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 6 Gbit
SFP 6 Gbit
3 Gbit
supported
SFP 3 Gbit
SFP 6 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 6 Gbit
Not
supported
SFP 3 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 6 Gbit
SFP 3 Gbit
SFP 6 Gbit
Not
supported
SFP 3 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 3 Gbit
SFP 6 Gbit
Not
supported
SFP 6 Gbit
SFP 6 Gbit
SFP 6 Gbit
SFP 6 Gbit
SFP 3 Gbit
SFP 6 Gbit
Not
supported
SFP 3 Gbit
SFP 6 Gbit
SFP 6 Gbit
SFP 6 Gbit
SFP 6 Gbit
SFP 6 Gbit
Not
supported
SFP 6 Gbit
SFP 6 Gbit
SFP 3 Gbit
SFP 6 Gbit
SFP 6 Gbit
SFP 6 Gbit
Not
supported
3-sector RF Module
•
•
FRGP, FRGF, FXFA, FXFB, FXEA, FRIE, FXCA, FRHA, FXDA, FRKA, FRBA, FRBB,
FRMA, FRMD
FRGT, FRGS, FXFC, FXEB, FXCB, FXDB
RRH
•
•
FXEA, FHCA, FRHB, FHDA, FRLB, FRMB
FRGU, FXED, FRII, FRHC, FRHF, FRMC, FRPA, FRPB, FRGY, FHEB, FHDB
33.5 DC feeding and extension kit cables
Table 144
DC feeding cables
Name
FPCA Dual power
cable 2 m
DN09142347 Issue: 07
Product
code
472806A
Length
2 m (6.6
ft)
© 2017 Nokia
Cable
label
995473
For
Notes
Release 2
System
Module Release 3 RF
Module/RRH
2 x multi-beam with IP
- open end, AWG 10
189
Nokia Base Station cables and SFPs
Table 144
Nokia Base Station Optional Items Description
DC feeding cables (Cont.)
Name
Product
code
Length
Cable
label
For
Notes
(version 10x
supports Flexi
RFM 240 W,
support for
Flexi RFM
6TX 360 W
from v. 20x.)
FPCB DC cable
472817A
multi-beam - multibeam 2 m
2 m (6.6
ft)
995281
Release 2
System
Module Release 2 RF
Module
Multi-beam with IP multi-beam with IP,
AWG 10
This is the same cable
that is provided in the
70 W RF Module
delivery (995281).
FPCC DC cable
multi-beam - open
2m
472823A
2 m (6.6
ft)
995614
Release 2
System
Module Release 3 RF
Module/RRH
Multi-beam with IP open end, AWG 8
FPTA 4 m Power
cable assembly
between RF
Module and
System Module *)
472246A
4 m (13.1
ft)
995400
Release 2
System
Module Release 2 RF
Module
Multi-beam with IP multi-beam with IP,
AWG 10
*) The FPTA cable is used when the 2 m power cable included in the 70 W RF Module delivery is
not long enough due to the site layout. Examples of using this cable are:
•
System Module is installed in an adjacent cabinet to the RF Module
•
System Module is installed more than 2 m away from the RF Module on a pole or wall
•
An OVP box is installed more than 2 m but less than 4 m from the RF Module
Figure 134
Multibeam
Multibeam
Figure 135
Multibeam
FPCA Dual power cable 2 m
NeededonlywithLOWvoltage
at1800FRM3x80W
AWG10 ≈ 6mm
Lowvoltagein1800RFMDCinput
3x80WRFM
3x80WRFM
FSMC/D/E
FSMC/D/E
2
Multibeamconnectorscutoff
FPCB DC cable multi-beam - multi-beam 2 m
AWG10 ≈ 6mm
2
3x60WRFM
3x80WRFM
FSMC/D/E
FSMC/D/E
Multibeam
Multibeamconnectorcutoff
190
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Figure 136
Multibeam
Nokia Base Station cables and SFPs
FPCC DC cable multi-beam - open 2 m
AWG8 ≈ 10mm
Figure 137
3x80WRFM
FSMC/D/Eor
FSMF
FSMC/D/E
FSMC/D/E
2
Standard DC cable open - open (single cable)
FSMC/D/Eor
FSMF
FSMF+
FPFD
3x80WRFM
FSMF+
FPFD
2
2
Coppersize3.3mm-25mm(2.5-7mm)
Outerdiameter:6-25mm
Table 145
Extension kit cables
Name
Product
code
Length
FSKA Flexi
471226A
System Extension
Kit (for between
System Module
and extension
System Module
with 2 m cables for
stack and pole
installations)
2 m (6.6
ft)
FSKB Flexi
472302A
System 4 m power
cable kit (for
between System
Module and
extension System
Module with 4 m
cables for stack
and pole
installations)
4 m (13.1
ft)
Cable
label
995102
995321
For
Notes
WCDMA
System
Module extension
System
Module
•
WCDMA
System
Module extension
System
Module
•
•
•
•
•
Multi-beam - open
end AWG 8 power
cable with IP
2 x LC 90° - LC
90° left IP, MM
4 x multi-mode
SFP
Multi-beam - open
end AWG 8 power
cable with IP
2 x LC 90° - LC
90° left IP, MM
4 x multi-mode
SFP
33.6 Synchronization cables
Synchronization cables used between System Modules.
Table 146
Flexi Multiradio BTS synchronization cables
Name
DN09142347 Issue: 07
Product
code
Length
Cable
label
For
Notes
ESFB Sync
ESMA/B/C to
FSMF 12 m
472685A
12 m
(39.4 ft)
995458
ESMA/B/C FSMF
MDR14 - HDMI, both
with IP
ESUA Synch
cable for Flexi
Ultra 12 m
471372A
12 m
(39.4 ft)
No cable
number
ESMA/B/C UltraSite
EDGE
MDR26 with IP - D15F
FTSL Sync cable
ESMB/C to
FSMC/D/E 2 m
472840A
2 m (6.6
ft)
995536
ESMA/B/C FSMC/D/E
MDR14 - MDR26, both
with IP
© 2017 Nokia
191
Nokia Base Station cables and SFPs
Table 146
Nokia Base Station Optional Items Description
Flexi Multiradio BTS synchronization cables (Cont.)
Name
Product
code
Length
Cable
label
For
Notes
ESFA Synch cable 471371A
for Flexi 12 m
12 m
(39.4 ft)
No cable
number
FSMC/D/E ESMA/B/C
MDR14 - MDR26, both
with IP
FSCC Sync
FSMC/D/E to
ESMA/B/C 5 m
5 m (16.4
ft)
995077
FSMC/D/E ESMA/B/C
MDR14 - MDR26, both
with IP
FSGA Flexi
472086A
System sync cable
with GPS
2 m (6.6
ft)
995259
FSMC/D/E FSMC/D/E
MDR14 - MDR26, both
with IP
FTSG Sync Cable
G
2 m (6.6
ft)
995430
FSMC/D/E FSMF
MDR14 -HDMI, both
with IP
FSCB Sync FSMF 472799A
to ESMA/B/C
5 m (16.4
ft)
995078
FSMF ESMA/B/C
HDMI - MDR26, both
with IP
FTSK Sync cable
FSMF to FSMD/E
472808A
2 m (6.6
ft)
995530
FSMF FSMD/E
HDMI - MDR26, both
with IP
ESUB Sync cable 472686A
FSMF to D15 Ultra
12 m
12 m
(39.4 ft)
995459
FSMF UltraSite
EDGE
HDMI with IP - D15F
FTSN Flexi sync
472846A
FSMF to FSMF 15
m
15 m
(49.2 ft)
No cable
number
FSMF - FSMF HDMI - HDMI, both
with IP
FTSF Sync Cable
F
472509A
2 m (6.6
ft)
995304
FSMF - FSMF HDMI - HDMI, both
with IP
ESLA Synch LMU
cable 5 m
471377A
5 m (16.4
ft)
995057
FTSO Sync Cable
473816A
25 m (82
ft)
996034
472798A
472576A
MDR26 + RJ-45 (with
IP) - MDR14 + RJ-9
(no IP) + M5 to M6
grounding cable
FSMF - FSMF, HDMI - HDMI, both
FSMF - FSIH with IP
33.7 GPS feeding cables
GPS feeding cables for System Module variants FSMF
Table 147
GPS feeding cables for System Module variants FSMF
Name
192
Product
code
Length
Cable
label
For
Notes
FTSE GPS cable
assembly 30 m
472510A
30 m
(98.4 ft)
995305
FSMF - GPS
HDMI with IP - IMC262212X (circular 12pole from Deutsch)
FTSH GPS cable
assembly 100 m
472577A
100 m
(328.1 ft)
995426
FSMF - GPS
HDMI with IP - IMC262212X (circular 12pole from Deutsch)
FTSM MR10 GPS
Cable 300 m
472870A
300 m
(984.3 ft)
995441
FSMF - GPS
HDMI with IP - IMC262212X (circular 12pole from Deutsch)
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Nokia Base Station cables and SFPs
GPS feeding cable for System Module variants FSMC/D/E
Table 148
GPS feeding cables for System Module variants FSMC/D/E
Name
Product
code
Length
Cable
label
For
Notes
FYHA GPS cable
set MDR26 Deutsch
471606A
30 m
(98.4 ft)
995122
FSMC/D/E GPS
MDR26 with IP IMC26-2212X (circular
12-pole from Deutsch)
FYHB GPS cable
set MDR26 Deutsch
471653A
100 m
(328.1 ft)
995135
FSMC/D/E GPS
MDR26 with IP IMC26-2212X (circular
12-pole from Deutsch)
33.8 EAC cables
Flexi Multiradio BTS EAC cables
Table 149
Flexi Multiradio BTS EAC cables
Name
DN09142347 Issue: 07
Product
code
Length
Cable
label
For
Notes
FTCR OD cable
471408A
RJ-45 Cat5e 15 m
15 m
(49.2 ft)
995094
Units with RJ45 - FSES
EAC (& transmission)
cable RJ-45 with IP open end
FTCS OD cable
471717A
RJ-45 Cat5e 30 m
30 m
(98.4 ft)
995148
Units with RJ45 - FSES
EAC (& transmission)
cable RJ-45 with IP open end
FTCT OD cable
471718A
RJ-45 Cat5e 50 m
50 m (164 995149
ft)
Units with RJ45 - FSES
EAC (& transmission)
cable RJ-45 with IP open end
FSAH EAC cable
HDMI - D37 15 m
472839A
15 m
(49.2 ft)
FSMF - FSEB
HDMI with IP - D37F
FSAD Flexi RRH
System alarm
cable 2.5 m
472563A
2.5 m (8.2 995387
ft)
Units with
MDR14 FSEB
MDR14 with IP - D37F
FSAC Flexi RRH
System alarm
cable 15 m
472284A
15 m
(49.2 ft)
Units with
MDR14 FSEB
MDR14 with IP - D37F
FSAF EAC cable
HDMI - D37 50 m
472695A
50 m (164 995439
ft)
FSMF - FSEB
HDMI with IP - D37F
FTSI EAC Cable
472578A
2.5 m (8.2 995299
ft)
FSMF - FSEB
HDMI with IP - D37F
FSAI EAC cable
MDR36 - RJ-45 2
m
472836A
2 m (6.6
ft)
995522
FSMC/D/E Units with RJ45 EAC
MDR36 - RJ-45, both
with IP
FSAA Flexi
System alarm
cable 15 m
471628A
15 m
(49.2 ft)
995136
RF Module FSEB
MDR36 with IP - D37F
FTSJ EAC cable
MDR36 - D37 2.5
m
472629A
2.5 m (8.2 995399
ft)
Release 3 RF
Module FSEB
MDR36 with IP - D37F
© 2017 Nokia
995524
995388
193
Nokia Base Station cables and SFPs
Table 149
Nokia Base Station Optional Items Description
Flexi Multiradio BTS EAC cables (Cont.)
Name
Product
code
Length
Cable
label
For
Notes
FSAJ EAC cable
472837A
D37 - RJ-45 2.5 m
2.5 m (8.2 995523
ft)
Units with RJ45 - FSEB
FSAG EAC cable
MDR14 - RJ-45 2
m
472813A
2 m (6.6
ft)
995531
Units with
MDR14 - RJ-45, both
MDR14 - Units with IP
with RJ-45
EBCA BBU Alarm
cable 2 m (used
for connecting up
to six BBU alarms
to ESMB/C)
471464A
2 m (6.6
ft)
No cable
number
BBU ESMA/B/C
Figure 138
RJ-45 with IP - D37F
RJ-45 with IP - D9
FTCR OD cable RJ-45 Cat5e 15 m
15000±40
Figure 139
FTCS OD cable RJ-45 Cat5e 30 m
30000-0/+2%
Figure 140
FTCT OD cable RJ-45 Cat5e 50 m
50000-0/+2%
194
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Figure 141
Nokia Base Station cables and SFPs
FSAD Flexi RRH System alarm cable 2.5 m/FSAC Flexi RRH System
alarm cable 15 m
Connector1
SubD37
Connector2
MDR14
Pin1
Wiring
Conn.1
Pinno.
25
7
31
32
8
26
29
9
27
28
10
36
19
30
DN09142347 Issue: 07
Conn.2
Pinno.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Pairno:Color
Signal
1:White
1:Blue
2:White
2:Orange
3:White
3:Green
4:White
5:White
5:Gray
6:Red
6:Blue
7:Red
7:Orange
4:Brown
GND
EXT Alarm(0)
GND
GND
EXT Alarm(1)
GND
GND
EXT Alarm(2)
GND
GND
EXT Alarm(3)
GND
5VEAC
GND
© 2017 Nokia
195
Nokia Base Station cables and SFPs
Figure 142
Nokia Base Station Optional Items Description
FTSJ EAC cable MDR36 - D37 2.5 m
2500±20
Pin1
Connector2
Connector1
Pin2
Pin1
Pin20
Pin19
Pin1
Pin19
Pin3
Pin36
Wiring
Conn.1
Pinno.
7
8
9
10
19
20
21
Conn.2
Pinno.
1
2
3
4
5
6
7
Pairno:Color
Signal
6:Green
7:Blue
8:Violet
9:grey
4:White/Orange
5: Yellow
5:White/Yellow
Alarm0
Alarm1
Alarm2
Alarm3
5VEAC
5VEAC
5VEAC
29
16
10:Black/Red
GND
1
2
3
4
28
19
20
21
22
23
1:Black
2:Brown
3:red
4:Orange
9:White/Grey
CTRL0
CTRL1
CTRL2
CTRL3
GND
30
31
11:Black/Green
GND
RRH Alarm Cables
The RRH variants FHDA and FHEA have an RJ-45 connector. The following list defines
the alarm cables used with the FHDA/FHEA and optional power modules:
•
•
FPMA/FPDA/FPFC - 994820 (2 m, 6.6 ft, RJ-45-RJ-45, included in the FPMA/FPDA
delivery)
FPRx - EBCA 4717464A (2 m, 6.6 ft, RJ-45-D9, D9 connector should be removed,
separate sales item)
Other RRH variants have an MDR14 connector. The following list defines the alarm
cables used with the other RRHs and optional power modules:
•
•
•
196
FPMA/FPDA/FPFC – FSAG 472813A.101 (2 m, 6.6 ft, separate sales item)
FPRx - FSAC 472284A (15 m, 49.2 ft, MDR14-D37, D37 connector should be
removed, separate sales item)
FSEB - FSAC 472284A (15 m, 49.2 ft, MDR14-D37, separate sales item) and FSAD
472563A (2.5 m, 8.2 ft, MDR14-D37, separate sales item)
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Nokia Base Station cables and SFPs
33.9 Upgrade Cable Kit (EUCA)
The Upgrade Cable Kit (EUCA) is used for providing the Rx signal to an E911 positioning
system (United States only) with a QMA interface as shown in the figure. The kit contains
3 pcs. of 1300 mm RF cables with QMA connectors on both ends.
Figure 143
Example of EUCA usage
33.10 Miscellaneous cables
Table 150
Flexi Multiradio BTS miscellaneous cables
Name
RDSA Rx
Diversity sharing
kit 2 m
Product
code
472454A
Length
2 m (6.2
ft)
Cable
label
995386
For
RF Module RF Module
Notes
6 x QMA - 7/16 (6
cables in the kit)
Note: an Upgrade
Cable Kit (EUCA) is
needed for Rx
diversity sharing
between Flexi
Multiradio BTS and
Flexi EDGE BTS.
The distance between
modules is limited by
the length of the
diversity cable and its
physical path.
DN09142347 Issue: 07
© 2017 Nokia
197
Nokia Base Station cables and SFPs
Table 150
Nokia Base Station Optional Items Description
Flexi Multiradio BTS miscellaneous cables (Cont.)
Name
Product
code
FTGA Rx Diversity 472385A
Cable kit SMAQMA-7/16
Length
12 m
(39.4 ft)
Cable
label
No cable
number
For
RF Module legacy Nokia
base station
Notes
2 x 12 m (39.4 ft)
SMA-SMA cables, a
QMA adapter cable
and 7/16 adapters
Each kit can be used
for Rx diversity sharing
with one RF Module
branch. Three kits are
needed for Rx
diversity sharing on all
three branches of an
RF Module.
The distance between
the module and
external BTS is limited
by the length of the
cable and its physical
path.
198
Rx Diversity Cable 472388A
kit SMA-QMA-7/16
5 m (16.4
ft)
995386
EQCA Q1 cable
471384A
3.1 m (used when
Q1 controlled
external
equipment on site)
3.1 m
(10.2 ft)
No cable
number
ELCA LMP cable
50 m (optional
outdoor-protected
long LMP cable,
used at mast top)
50 m (164 No cable
ft)
number
471370A
© 2017 Nokia
See above
See above
RJ - RJ Q1 cable
PC - System
Module
(ESMB/C)
LMP port
RJ(45) - RJ(45) LMP
cable
The cable can be left
in the LMP port for
mast installations. This
allows local access to
the BTS without
having to climb the
mast or remove the
front cover. The laptop
end has an extra
connector seal to
provide weather
protection when the
laptop end is left
disconnected at the
site.
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Appendix Casing and cover kits need for Flexi
Multiradio units
34 Appendix Casing and cover kits need for
Flexi Multiradio units
Lists of modules which are delivered with a casing.
Table 151
Module
Casing and cover kits need for System Modules
Casing
Kit
Casing needed for installation in
Floor/Wall/
Pole
FCIA
FCOA
Power
cabinet
ESMA/B/C
Casing
optional
EMHA
Yes
No
No
No
FSMC/D/E
Always with
casing
FMCA
N/A
N/A
N/A
N/A
FSMF
Always with
casing
FMCA v.
207 (or
newer)
N/A
N/A
N/A
N/A
Table 152
Module
FRGF
2100
Casing and cover kits need for Radio Modules
Casing
Kit
Casing needed for installation
in
Included in the delivery
Floor/ FCIA
Wall/Po
le
FCO
A
Power
DC
cabinet cable 2
m (2 x
Multibe
am)
Multim 2 SFP
ode
(multim
fiber 2
ode)
m
Always with
casing
FMCA
N/A
N/A
N/A
N/A
Yes
Yes
Yes
Always with
casing
FMCA
N/A
N/A
N/A
N/A
Yes
Yes
Yes
Always with
casing
FMCA
N/A
N/A
N/A
N/A
Yes
Yes
Yes
Always with
casing
FMCA
N/A
N/A
N/A
N/A
Yes
Yes
Yes
Always with
casing
FMCA
N/A
N/A
N/A
N/A
Yes
Yes
Yes
Always with
casing
FMCA
N/A
N/A
N/A
N/A
Yes
Yes
Yes
3x60 W
FRGP
2100
3x60 W
FRHA
2600
3x60 W
FRIE
1.7/2.1
3x60 W
FRKA
1500
3x60 W
FRBB
700
DN09142347 Issue: 07
© 2017 Nokia
199
Appendix Casing and cover kits need for Flexi
Multiradio units
Table 152
Module
Nokia Base Station Optional Items Description
Casing and cover kits need for Radio Modules (Cont.)
Casing
Kit
Casing needed for installation
in
Included in the delivery
Floor/ FCIA
Wall/Po
le
FCO
A
Power
DC
cabinet cable 2
m (2 x
Multibe
am)
Multim 2 SFP
ode
(multim
fiber 2
ode)
m
3x60 W
Always with
casing
FMCA
N/A
N/A
N/A
N/A
Yes
Yes
Yes
Always with
casing
FMCA
N/A
N/A
N/A
N/A
Yes
Yes
Yes
Casing
optional
EMHA
Yes
No
No
No
Yes
Yes
Yes
Casing
optional
EMHA
Yes
No
No
No
Yes
Yes
Yes
Casing
optional
EMHA
Yes
No
No
No
Yes
Yes
Yes
FXFA/F Casing
optional
XFB
1900
EMHA
Yes
No
No
No
Yes
Yes
Yes
Casing
optional
EMHA
Yes
No
No
No
Yes
Yes
Yes
Casing
optional
EMHA
Yes
No
No
No
Yes
Yes
Yes
Casing
optional
EMHA
Yes
No
No
No
No
No
No
Casing
optional
EMHA
Yes
No
No
No
No
No
No
FRMA
800EU
3x60 W
FRMD
800
3x60 W
FXCA
850
3x60 W
FXDA
900
3x60 W
FXEA
1800
3x60 W
3x60 W
FRGS
2100
3x80 W
FRGT
2100
3x80 W
FXCB
850
3x80 W
FXDB
900
200
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 152
Module
Appendix Casing and cover kits need for Flexi
Multiradio units
Casing and cover kits need for Radio Modules (Cont.)
Casing
Kit
Casing needed for installation
in
Included in the delivery
Floor/ FCIA
Wall/Po
le
FCO
A
Power
DC
cabinet cable 2
m (2 x
Multibe
am)
Multim 2 SFP
ode
(multim
fiber 2
ode)
m
3x80 W
Casing
optional
EMHA
Yes
No
No
No
No
No
No
Casing
optional
EMHA
Yes
No
No
No
No
No
No
Casing
optional
EMHA
Yes
No
No
No
No
No
No
Casing
optional
EMHA
Yes
No
No
No
No
No
No
Casing
optional
EMHA
Yes
No
No
No
No
No
No
Casing
optional
EMHA
Yes
No
No
No
No
No
No
Casing
optional
EMHA
Yes
No
No
No
No
No
No
Casing
optional
EMHA
Yes
No
No
No
No
No
No
All
RRHs
(except
FRGG,
FHDA,
FHEA)
Solar shield
included
N/A
Only
N/A
pole/wa
ll
N/A
N/A
No
No
No
FRGG
RRH
Optional
sunshield
N/A
Only
N/A
pole/wa
ll
N/A
N/A
No
No
No
FXEB
1800
3x80 W
FXFC
1900
3x80 W
FXGT
1900
3x80 W
FRPA
700
6x40 W
FRPB
700
6x40 W
FRMC
800
6x40 W
FRHC
2600
6x40 W
FRHF
2600
6x40 W
DN09142347 Issue: 07
© 2017 Nokia
201
Appendix Casing and cover kits need for Flexi
Multiradio units
Table 152
Module
Nokia Base Station Optional Items Description
Casing and cover kits need for Radio Modules (Cont.)
Casing
Kit
Casing needed for installation
in
Included in the delivery
Floor/ FCIA
Wall/Po
le
FCO
A
Power
DC
cabinet cable 2
m (2 x
Multibe
am)
Multim 2 SFP
ode
(multim
fiber 2
ode)
m
FHDA
RRH
Solar shield
included
N/A
Only
N/A
pole/wa
ll
N/A
N/A
No
No
No
FHEA
RRH
Solar shield
included
N/A
Only
N/A
pole/wa
ll
N/A
N/A
No
No
No
Table 153
Module
Casing and cover kits need for Power Modules
Casing
Kit
Casing needed for installation in
Floor/Wall/
Pole
FCIA
FCOA
Power
cabinet
FPDA (24
>48 V DC)
Always with
casing
FMCB
N/A
N/A
N/A
N/A
FPMA
(BBU)
Always with
casing
FMCA
N/A
N/A
N/A
N/A
FPRx
(rectifier)
Always with
casing
FMCA
N/A
N/A
N/A
N/A
FPFC
Casing
optional
EMHA
Yes
No
No
No
FODA
Casing
optional
EMHA
Yes
No
No
No
Following tables list the compatibility of EMHA and FMCA with Flexi EDGE System
Modules, Flexi Multiradio System Modules and Flexi Power Modules. Air deflector plate
has been removed from EMHA (470316A.208 or later) and FMCA (470239A.207)
versions.
Table 154
EMHA compatibility with Flexi EDGE System Modules
System Module
EMHA 470316A.207
EMHA 470316A.208 or later
(Air deflector plate included)
(Air deflector plate not
included)
Compatible
Not compatible
ESMA 470246A.1071)
Compatible
Compatible
ESEA 470330A.101 – 105
Compatible
Not compatible
ESEA 470330A.1061)
Compatible
Compatible
ESMA 470246A.101 – 106
ESMA 470246A.101 – 106
202
© 2017 Nokia
DN09142347 Issue: 07
Nokia Base Station Optional Items Description
Table 154
EMHA compatibility with Flexi EDGE System Modules (Cont.)
System Module
1)Air
Appendix Casing and cover kits need for Flexi
Multiradio units
EMHA 470316A.207
EMHA 470316A.208 or later
(Air deflector plate included)
(Air deflector plate not
included)
deflector plate is part of ESMA and ESEA delivery.
Table 155
FMCA compatibility with Flexi Multiradio System Modules
System Module
FSMF 472181A.10x
Table 156
FMCA 470239A.206
FMCA 470239A.207
(Air deflector plate included)
(Air deflector plate not
included)
Not compatible
Compatible
FMCA compatibility with Flexi Power Module (FPMA)
Power Module
FMCA 470239A.207
(Air deflector plate included)
(Air deflector plate not
included)
FPMA 470139A. 204
Compatible
Not compatible
FPMA 470139A.2052)
Compatible
Compatible
2)Air
DN09142347 Issue: 07
FMCA 470239A.206
deflector plate is part of FPMA delivery.
© 2017 Nokia
203