ADJUSTABLE 40°
®
BeveLED
Trimless
Innfinite Coloor+
3435
PROJECT INFORMATION
™
PROJECT
DATE
TYPE
1" Regress
™
BeveLED In
nfifinnite Color+ Recessed Trimless Adjustable - Illuminate your space with any color available in the spectrum with BeveLED
Infinate Color+. Tune the light from saturated blue, violet, green, yellow, orange, and red, to any of a wide variety of perfect architectural whites with
DMX controls. Infinite opportunities abound for hospitality, entertainment, and cultural lighting applications.
1" Regress
1" Regress
Bevel Finish
Color
(10, 13, 21, 28, RAL)
31⁄2" x 31⁄2"
41⁄2" x 41⁄2"
HOW TO SPECIFY
Ordering Example: Specify trim code and housing code to order: Example : 3435W - B1 - S - 10 - LSLA4 - 8432 - WRGB1 - 30KS - 35 - NC - 277V - DMX1M - RJ - CB27
TRIM ORDERING INFORMATION
™
BEVEL STYLE
OPTION
LENS
–
3435 W
Wet location 1
Square
Trimless
Adjustable 1 Wet location, use with
–
B1 1” Regress Bevel,
Painted Die Cast
In
nfinite Color+ Spectrum
B1 BEVEL FINISH
–
S
10
13
21
28
RAL
S Solite
(provided
standard)
B1 trims only. N/A with
millwork.
White
Statuary Bronze
Black
Metalized Grey
Custom Color
(specify RAL #)
Relative Output (W/nm)
TRIM
3435 ___
AB1 1” Regress Bevel,
S Solite
blank for AB1 and
Black Anodized Finish
(provided (Leave
AC1 Bevel Styles)
standard)
AC1 1” Regress Bevel,
Clear Matte Anodized Finish
HOUSING ORDERING INFORMATION
HOUSING
CODE
LSLA4
LSLA4
WATTAGE
–
8432
8432 32W LED,
1175
Lumen
Maximum
ENGINE
CODE
PRIMARY
WHITE
– WRGB1 – 30KS
WRGB1
30KS 3000K,
80+ CRI
REFLECTOR
–
35
HOUSING TYPE
–
VOLTAGE
–
35 35° beam NC New Construction
CP Chicago Plenum 2
IC Insulation-Contact
Rated / Airtight 2
0.8
0.6
0.4
0.2
0
400
450
500
550
600
650
700
750
wavelength (nm)
Independently mix white light with color in any combination
imaginable to create a uniquely personal light source.
CABLING
DIMMING DRIVER
–
120V
277V
1
–
ACCESSORIES
–
RJ RJ45 Jacks
CB27 27” C-Channel Bars
DMX1M EldoLED DMX 0.1%
dimming, manual
WR Splice Connection CB52 52” C-Channel Bars
addressing using
XL XLR5 Connectors 3
EML Emergency battery 4
RDM protocol, 8 bit
EMLW
Emergency battery,
DMX2M EldoLED DMX 0.1%
wet location 4
dimming, manual
addressing using
MLXX Millwork adapter
RDM protocol, 16 bit
XX=Specify Color
(10, 13, 21, 28, RAL)
Millwork not wet listed
2 For use with NC housings only. Provided
with remote test switch.
OPTICAL ACCESSORIES
(Order separately)
3
Requires above ceiling
access; N/A with IC or CP
housings.
2 N/A with EM options.
USAI
Lighting
®
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
AL20F Refer to optical
AL30F accessories matrix on
AL40F next page for resulting
beamspreads when
AL55F accessory lens is
AL80F combined with 35° optics
AS61F
Clearly specify quantity in your order
© 2015. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 09/24/2015
ADJUSTABLE 40°
BeveLED Innfinite Coloor+ Trimless
™
3435
TRIM INFORMATION
1" Regress
Optical Accessories Matrix
if you want…
and you have….
35°
40° beam
AL30F
45° beam
AL40F
55° beam
AL55F
60° beam
AL80F
40x60° beam
AS61F
size F
1" Regress
Bevel Finish
Color
31⁄2" x 31⁄2"
41⁄2" x 41⁄2"
HOUSING INFORMATION
New Construction
Universal Style Housing - NC
IC / Airtight - IC
73/8"
5
81/2"
/8"-1"
7"
7"
185/8" (Plan View)
185/8" (Plan View)
221/8" (Plan View)
221/8" (Plan View)
USAI
Lighting
/8"-1"
13"
13"
®
5
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2015. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 09/24/2015
ADJUSTABLE 40°
BeveLED Innfinite Coloor+ Trimless
™
3435
SPECIFICATIONS
TRIM: 4-1/2" square aperture with a 1" regressed bevel
retained by two mounting clips. Die cast aluminum bevel
is available in white, statuary bronze, black, and metalized
grey finishes. Also available in black or clear matte bevel,
with painted flange. Custom color flanges available (provide
RAL#).
TRIM LENS: Trim is shipped with integral solite lens
standard.
REFLECTOR: Interchangeable precision injection molded
specular polycarbonate reflector optimized for 35° beam
distribution.
ADJUSTMENT: True hot aiming with center beam optics is
adjustable, with a completely tool-less mechanism. 0°-40°
lockable vertical tilt with 362° lockable rotation.
FIELD REPLACEABLE LIGHT ENGINE: Available in 1 lumen
package: typical power draw is 23 input watts with 975
delivered lumens. Maximum power draw is 32 input watts
with up to 1175 delivered lumens. Engine is field replaceable
through the aperture without tools.
CABLING: The DMX512 driver is provided with two twisted
pair cabling for connection with communication controls.
Data cables must be run in series between fixtures. Choose
your preferred method of connection when specifying. To
avoid signal transmission problems, a DMX link terminator
should be used in the last fixture in a series. NOTE:
Communication cables and AC power lines must not be run
in the same conduit.
• RJ Cabling Option: fixture is provided with a DMX512
interface board inside the junction box with RJ45 jacks for
use with CAT5 cable terminated with RJ45 connectors.
For USAI Lighting fixtures with RJ45/CAT5 connections,
the following ANSI/TIA/EIA-568 pin out standard is used.
Link termination dip switch is provided at the connector
board; no separate link termination device is required. See
dimming compatibility pages for drawings and more details
on this configuration.
EMERGENCY: Emergency lighting battery pack with
remote test switch is serviceable through aperture
for NC housings. Bodine BSL26C provides 200mA
for 90 minutes; delivers ~200-300 lumens. EMLW
wet location option is available with B1 trim only
and requires remote test switch. EM option is not
available with IC or CP housings.
MOUNTING: Butterfly brackets and adjustable
nailer bars with integral nails provided. Nailer bars
are extendible from 14” to 24” centers.
HOUSING: All-Ways Square® (covered by US
Pat. No: US 7,832,889) housing allows alignment of
square aperture (up to 20° rotation) after housing
installation and prior to finish ceiling installation.
Fabricated of 20 ga. galvanized steel with thru wire
J-box, 4 in 4 out at min. 90°C, #12 AWG thru branch
circuit wiring.
MAXIMUM CEILING THICKNESS: As per drawings
above.
ACCESSORY HOLDER: Snap in accessory holder
shipped with fixture. Accepts “F” size lens,
maximum 1.
COLOR: BeveLED Infinite Color+ is capable of creating
any color desired in the spectrum, from saturated blue,
violet, green, yellow, orange, and red, to a wide variety of
architectural whites. All color change is digitally controlled
through the DMX interface of your choice.
RATED LIFE: Based on IESNA LM80-2008 50,000 hours at
70% lumen maintenance (L70).
THERMAL MANAGEMENT: Proprietary high performance
aluminum die cast heatsink for maximum LED life. Ambient
temperatures at fixture location should not exceed 40°C
during normal operation.
FIELD REPLACEABLE DIMMING DRIVER: Solid state
electronic constant current DMX512 8-bit driver with a
high power factor provided standard. Specify 120V or 277V.
Driver complies with IEEE C62.41 surge protection. Specify
DXM1M for 8-bit communication controls; specify DMX2M
for 16-bit communication controls. All driver options require
remote device management (RDM) communication protocol
for addressing.
• WR Cabling Option: no interface board is supplied; cables
must be spliced inside the junction box for connection. The
data cable used must meet the following requirements:
• type: shielded, 2-conductor twisted pair
• maximum capacitance between conductors: 30 pF/ft
• maximum capacitance between conductor and
shield: 55 pF/ft
• maximum resistance: 0.02 ohms/ft
• normal impedance: 100-140 ohms
• conductive core: 24 AWG is recommended
CEILING CUT OUT: Millwork: 4-13/16” x 4-13/16”
All others: 5-1/2” x 5-1/2”
LISTINGS: Dry/Damp. Wet location option available
with B1 trim only. Millwork is not wet listed. NRTL/
CSA-US tested to UL standards. IBEW union made.
WARRANTY: 5 years
NOTES:
• Not for use in corrosive environment.
• Use of pressure washer voids warranty.
• Not for use in acoustical ceiling tiles.
If 3-wire data cables are preferred, we suggest a Belden
9841 or equivalent cable which meets the specifications for PHOTOMETRICS: Consult factory or website for IES
EIA RS-485 applications. Do not use standard microphone files. Tested in accordance with IESNA LM79-2008.
cables: they cannot transmit DMX512 data reliably over
long distances. NOTE: DMX link termination device (by
others) should be used on last fixture in line on a circuit to
avoid signal loss.
• XL Cabling Option: fixture is provided with a DMX512
interface board on the junction box with standard 5-pin
XLR5 jacks which accept XLR5 connectors for DMX
communication. Any standard XLR cable can be used for
this option. Link termination dip switch is provided at the
connector board; no separate link termination device is
required. NOTE: This cabling option requires above ceiling
access.
USAI
Lighting
®
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2015. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 09/24/2015
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
DMX1M, DMX2M
®
BeveLED Innfinite Coloor+
™
DIMMING DRIVER WIRING SCHEMES:
DMX1M: EldoLED DMX dimming with manual addressing, 8-bit (Dims down to 0%)
DMX2M: EldoLED DMX dimming with manual addressing, 16-bit (Dims down to 0%)
Choose from WR (splice connection), RJ (RJ45 jacks) and XL (XLR5 connectors) cabling options,
and refer to corresponding wiring diagram below:
4 BLUE
3
DMX (-)
GREEN/ WHITE
2 ORANGE
DMX (+) 1
BLUE / WHITE
5
GREEN
6
BROWN / WHITE
7
ORANGE/WHITE
BROWN
8 SHIELD
CAT 5 CABLE
RJ CABLING OPTION
RJ-45 CONNECTORS
DMX DATA IN
DMX DATA OUT
ON
DMX+
ON
DMXSHIELD
TURN ON DIP SWITCH
TO TERMINATE LAST
FIXTURE ON DMX BUS
OFF
OFF
LOAD
LINE
V+
DRIVER
NEUTRAL
V-
GROUND
WR OPTION
DMX DATA IN
DMX DATA OUT
DMX+ BLUE
DMX+
DMX- WHITE
DMX-
SHIELD-
SHIELD
• WR Cabling Option: no interface board is supplied; cables
must be spliced inside the junction box for connection. The
data cable used must meet the following requirements:
• type: shielded, 2-conductor twisted pair
• maximum capacitance between conductors: 30 pF/ft
• maximum capacitance between conductor and
shield: 55 pF/ft
• maximum resistance: 0.02 ohms/ft
• normal impedance: 100-140 ohms
• conductive core: 24 AWG is recommended
LOAD
DRIVER
LINE
NEUTRAL
V+
V+
V-
V-
If 3-wire data cables are preferred, we suggest a Belden
9841 or equivalent cable which meets the specifications for
EIA RS-485 applications. Do not use standard microphone
cables: they cannot transmit DMX512 data reliably over
long distances. NOTE: DMX link termination device (by
others) should be used on last fixture in line on a circuit to
avoid signal loss.
GROUND
XL CABLING OPTION
NOTE: This cabling option requires above ceiling access.
4.75"
XLR CABLE
5 PIN XLR CONNECTORS
MALE FEMALE
DMX DATA IN
1.-10"
DMX DATA OUT
XLR CONNECTORS WHEN XLR5 IS
SELECTED LEAVE CLEARANCE FOR
J-BOX TO SLIDE TO APERTURE
Off
DMX+
On
DMX-
Termination
1-1/8"
SHIELD
TERMINATION
LOAD
TURN ON DIP
SWITCH TO
TERMINATE
LAST FIXTURE
ON DMX BUS
V+
LINE
DRIVER
NEUTRAL
V-
GROUND
USAI
Lighting
®
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2014. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-265
®
BeveLED Innfinite Coloor+
™
DIMMING DRIVER WIRING SCHEMES:
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
DMX1M, DMX2M
DMX MUST BE DAISY CHAINED IN SINGLE LINE
CORRECT !
INCORRECT !
DRIVER
DRIVER
DRIVER
DRIVER
DRIVER
DRIVER
DRIVER
DRIVER
DRIVER
DRIVER
DRIVER
NOTES FOR DRIVERS:
1. DMX signal cable must NOT be run in same conduit as high voltage AC power lines.
2. Fixtures must be daisy chained in one serial line using Data in and Data out
3. Maximum of 32 DMX devices on a single DMX bus
4. Maximum of 1600 ft serial communication link distance
5. To avoid signal loss, DMX signal terminator should be used on last fixture in line. For RJ
and XL cabling options, this is provided through a dip-switch on the connector board. For
WR cabling options, this device (120 ohm resistor) is provided by others.
6. For best results when using WR cabling option use communication data splices.
7. Default state for fixtures off. Luminaire will not light until DMX signal is received.
USAI
Lighting
®
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2014. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-265