Remote Light Switch with Local Override
Specifications
Ratings
The Sentry Switch provides individual local line voltage override
control of lighting in time-based control schemes. The Sentry
Switch can be used to manually turn lighting on and off in the
normal manner. However, it will automatically reset itself to the
”off” position in response to each programmed power
interruption provided by the lighting control panel. When used
in conjunction with a switching system, the Sentry Switch
provides the most economical and practical solution for allowing
individual area overrides without requiring separate line voltage
or low voltage wiring.
• SS05277, SD05277 – single pole
SS053277, SD053277 – three-way
minimum load .2 amp; maximum load 5 amps
• SS20277, SD20277 – single pole
SS23277, SD23277 – three-way
minimum load 1 amp; maximum load 20 amps
Electrical
• Multi-voltage (120V, 240V or 277V) 347V available
by special order
• Two-wire connection, SPST
• Three-wire connection, SPDT – three-way
• No neutral required
Dimensions
Wiring Diagrams
4.13 (106)
• Standard wall switch on/off operation
• Toggle (SS) or Decorator Rocker (SD)
• Mechanically resets to “off” automatically when input power
to the unit is interrupted for five seconds or longer
• Mini neon locator light illuminates when unit is switched off
• Strap-mount device mounts in single or multi-gang wallbox
• Uses standard wallplates, not included with unit
• UL and cUL Listed
• When used with occupancy sensors, eliminates false
triggering
2.376 (60.3)
3.281 (83.3)
Features
2.76 (70)
All dimensions are inches (millimeters)
1.5 (38)
1.75 (44.4)
Travelers must cross
R
R
Y
Y
Sentry Switch with Relay Panel
Load
Two Location Operation
Time Clock
(Controller)
Relay Cabinet
Two three-way Sentry Switches
can be connected to replace
three-way switches. Allows
either location to turn the lights
on. Same location must be
turned off when operated
manually.
Use with switching system to
provide individual local override
for multiple rooms or areas that
are controlled by a single relay.
Load
Single Location Operation
Sentry Switch with Occupancy Sensor
Occupancy Sensor
Occupancy Sensor
Power Pack
Use with Occupancy Sensors to
provide “manual on/automatic
off” operation.
Lighting Panel
Load
Sentry Switch
Sentry LLC • 225 Sutton Place, P.O. Box 14399, Santa Rosa, CA 95402 • Tel: (707) 585-0333 Fax: (707) 585-7313