PORTFOLIO TM
D ES C R IPTION
Recessed 6 inch aperture directional / slope for CDM-R111 ceramic metal
halide lamp. Integral aluminum reflector provides smooth and precise
beam control in 10°, 25° and 40° angles. Lamp rotates 365° and tilts 35°
about the center of the aperture at the ceiling plane. Universal input
electronic ballast features end of life shutdown. Fixture is suitable for
commercial construction. Insulation must be kept 3" from top and sides
of housing.
Type
Catalog #
Project
Date
Comments
Prepared by
SPE C IFIC A TION FEA T U R E S
H ou s i n g
A dj us tme nt Mechan ism
In su latio n Dectecto r
Steel housing encloses lamp
adjustment mechanism and is
painted matte black to reduce
stray light. Top access allows
service from above. Access door
allows splice inspection and ballast
service through aperture.
Locking adjustment mechanism
rotates 365° and tilts 35°. Center
beam optics aligns axis of lamp
with aperture as lamp translates
from nadir thru 35°. Lamp aiming
scale enables consistent settings
across multiple fixtures.
Self resetting detector opens circuit
if insulation is improperly installed.
Pla s t e r F r a m e / Col l a r
L owe r Shi e l di n g R eflecto r
Die cast aluminum collar
accommodates ceiling materials up
to 1-1/2” thick.
Angle cut 0.050” thick aluminum
parabolic contour provides
maximum light output without
flashback. Self flanged standard
with optional white painted flange.
Also available with polymer
trim ring. Trim ring may be
interchanged with metal trim ring
available in various finishes or
removed for rimless installation,
see accessories. Available in all
Portfolio Alzak® finishes.
U n i v e r s a l M o u n t ing Bra c ke t
Accepts ½” EMT, C channel
and bar hangers and adjusts 5”
vertically from above the ceiling.
Ju n c t i o n B o x
(6) ½” and (2) ¾” trade size pry
outs positioned to allow straight
conduit runs. Listed for (8) #12
AWG (four in, four out) 90°C
conductors and feed thru branch
wiring.
Fa s t e n e r s
All fasteners that must be
routinely loosened or tightened for
installation and or maintenance are
captive.
B allast
Universal input 120/277V electronic
ballast provides noise free
operation, improved efficiency and
increased lamp life as compared
with magnetic ballast. Regulated
output power over a wide range
of ANSI lamp voltages results in
excellent color stabillity over time.
MA620AR
MA639AR
6470/6471
Co d e Co mplian ce
Thermally protected and cULus
damp location listed. Optional
City of Chicago environmental
air (CCEA) marking for plenum
applications. EMI/RFI emissions per
FCC 47CFR Part 18 non consumer
limits.
Ceramic Metal Halide
CDM-R111
STEPREPEAT>
Tri m Re te nti on
Torsion springs pull trim tight
to ceiling. Reflector is keyed to
prevent improper orientation
relative to lamp.
6-Inch
Directional
Soc ke t
Pulse rated GX8.5 socket for use
with protected CDM-R111 lamp
only.
9-27/32"
[250mm]
CP 9-27/32"
[250mm]
7-1/8"
[184mm]
ENERGY DATA
T OP V IE W
20W
18-1/8"
[461mm]
120V Input Power: 26W
277V Input Power: 26W
120V Input Current: 0.22A
277V Input Current: 0.11A
Minimum Starting Temp: -15°C, +5°F
THD: <20%
Power Factor: >0.90
Sound Rating: A
39W
120V Input Power: 48W
277V Input Power: 47W
120V Input Current: 0.45A
277V Input Current: 0.18A
Minimum Starting Temp: -20°C, -5°F
THD: <20%
18-19/32"
[472mm]
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
Power Factor: >0.90
Sound Rating: A
ADP091279
2013-09-27 10:00:58
MA620AR MA639AR 6470/6471
OR D ER ING INFOR M A TION
S A M P L E N U M B E R : M A 6 3 9 E = 6” directional housing with UNV 120/277V electronic ballast for a 39W CDR-R111 CMH lamp
6 4 7 1 L I = 6” angle cut reflector, self flanged, specular clear, low iridescent (Order housing and trim separately)
Housing
Wattage/Lamp Type
MA6=6” AR MH directional/
slope
MA6CP=6” AR MH dierctional /
slope, CCEA listed for City
of Chicago plenum
requirements
Ballast
Trim
E=Electronic, UNV 120/277V 50/60Hz
Finish
Alzak ® Finishes
LI=Specular clear,
low iridescent
H=Semi specular clear
WMH=Warm haze
G=Gold
WH=Wheat
GP=Graphite
GPH=Graphite haze
B=Black
6470=6” angle cut reflector,
white polymer trim ring
6471=6” angle cut reflector,
self flanged
20AR=20W CDM-R111 lamp
39AR=39W CDM-R111 lamp
Options
Accessories
WF=White painted flange
(self- flanged only)
HB26=Bar hanger, 26” long, pair
HB50=Bar hanger, 50” long, pair
RMB22=Bar hanger for wooden joists,
22” long, pair
TRM6*=Metal trim ring, specify finish
TRR6=Rimless trim ring
L200 Series=lenses and filters
H347=347V step down transformer, 75VA
PHOTOM ETR IC S
Candlepower
Candlepower Distribution
Test No. H28103
MA639ARE-6471LF
Lamp=CDM-R11 35W/830
10° Beam
Lumens=1430
Efficiency=88.3%
Deg.
0
5
15
25
35
45
55
65
75
85
90
0°
77
122
504
12921
12573
439
32
3
2
2
0
CD
180°
77
47
31
15
6
4
4
3
3
2
0
PHOTOM ETR IC S
Candlepower
Candlepower Distribution
Test No. H28100
MA639ARE-6471LF
Lamp=CDM-R11 35W/830
24° Beam
Lumens=1430
Efficiency=88.3%
Deg.
0
5
15
25
35
45
55
65
75
0°
3588
3398
3194
2721
2315
1574
614
416
191
CD
180°
3588
3643
3273
2862
2445
1715
479
46
16
85
90
17
0
3
0
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
ADP091279
2013-09-27 10:00:58