Modernization & Upgrades
For Industrial Gas Turbines up to 15 MW
Answers for Energy
Siemens Energy is a world leader in industrial gas turbines for power generation
and mechanical drive applications. As part of the comprehensive portfolio of
customer service activities, we provide both modernization and upgrades for all our
gas turbines.
Helping our customers to stay ahead
Keeping customers up to date, with the latest in gas
turbine technology, is key to our customer support
philosophy. By taking the best from our extensive new
turbine development program, we have produced a wide
variety of modernizations and upgrades for existing
installations.
Customer benefits:
Access to the latest OEM proven technology for
extended economic viability of the asset.
Reduced operating costs.
Increased power, availability and efficiency.
Reduced emissions with lower environmental impact.
These include the latest in emissions reduction
technology, availability improvements and control system
upgrades, as well as power and efficiency improvements
for the current range of industrial gas turbines.
We provide:
Power enhancements through engine hardware
replacement or by secondary means, such as filtration
efficiency improvements.
Emissions reduction to meet demands for cleaner
energy, through our award winning DLE (Dry Low
Emissions) combustion system, or more traditional
techniques such as steam or water injection.
www.siemens.com/energy
Published by and copyright © 2013:
Siemens AG
Energy Sector
Freyeslebenstrasse 1
91058 Erlangen, Germany
Siemens Energy, Inc.
4400 Alafaya Trail
Orlando, FL 32826-2399, USA
For more information, please contact
our Customer Support Center.
Phone: +49 180 524 70 00
Fax:
+49 180 524 24 71
(Charges depending on provider)
E-mail:support.energy@siemens.com
www.siemens.com/energy
Energy Service Division
LCN 2013 - F33.4 LN
Printed on elementary chlorine-free
bleached paper.
All rights reserved. Trademarks mentioned in
this document are the property of Siemens AG,
its affiliates, or their respective owners.
Subject to change without prior notice.
The information in this document contains
general descriptions of the technical options
available, which may not apply in all cases.
The required technical options should
therefore be specified in the contract.