2024-07-21T07:13:17+03:00[Europe/Moscow] en true <p>In a DC circuit, ? will oppose current flow.</p><p>a.</p><p>eddy currents</p><p>b.</p><p>resistance</p><p>c.</p><p>skin effect</p><p>d.</p><p>all of the above</p>, <p>In an AC circuit, ? will oppose current flow.</p><p>a.</p><p>eddy currents</p><p>b.</p><p>resistance</p><p>c.</p><p>skin effect</p><p>d.</p><p>all of the above</p>, <p>Current passing through a resistance produces ? .</p><p>a.</p><p>a dissipation of power</p><p>b.</p><p>a voltage drop</p><p>c.</p><p>heat</p><p>d.</p><p>all of the above</p>, <p>How can instantaneous AC current values be determined?</p>, <p>What is the instantaneous value of a 10 ampere peak sine wave at 0, 30, 45, 60, and 180</p><p>degrees?</p><p>0° = ? amps</p><p>30° = ? amps</p><p>45° = ? amps</p><p>60° = ? amps</p><p>180° = ? amps</p>, <p>Current and voltage in an AC resistive circuit are ? phase.</p><p>a.</p><p>in</p><p>b.</p><p>out of</p><p>c.</p><p>single</p><p>d.</p><p>three</p>, <p>Drag the appropriate current sine wave to the correct location to show an in-phase</p><p>relationship.</p>, <p>Given the circuit, solve for the following: (Round the FINAL answer to two decimal places,</p><p>if needed.)</p><p></p><p>What is the peak voltage for the circuit? </p><p></p><p>What is the effective voltage for the circuit? </p><p></p><p></p><p>What is the total power or wattage of the circuit? </p>, <p>Factors such as skin effect and eddy currents are present in an AC circuit and, in practice,</p><p> ? the resistance of the conductor.</p><p>a.</p><p>decrease</p><p>b.</p><p>increase</p><p>c.</p><p>do not affect</p>, <p>As frequency increases, skin effect ? .</p><p>a.</p><p>increases</p><p>b.</p><p>decreases</p><p>c.</p><p>stays the same</p>, <p>Skin effect and eddy currents ? present in a DC circuit, and, therefore, will not be</p><p>factors that affect the opposition to current flow in a DC circuit.</p><p>a.</p><p>are</p><p>b.</p><p>are not</p>, <p>Skin effect can be ? by using stranded conductors, which provide greater surface area</p><p>for current than solid conductors.</p><p>a.</p><p>reduced</p><p>b.</p><p>increased</p>, <p>The ? value of AC voltage will produce the same amount of power as a like value of DC</p><p>voltage.</p><p>a.</p><p>average</p><p>b.</p><p>effective</p><p>c.</p><p>nominal</p><p>d.</p><p>peak</p>, <p>When an AC voltage is given, it is always the ? value unless stated otherwise.</p><p>a.</p><p>average</p><p>b.</p><p>nominal</p><p>c.</p><p>peak</p><p>d.</p><p>RMS</p>, <p>Match the points on the sine wave that indicate the values in the table.</p><p></p><p>Average voltage</p><p>Effective voltage (RMS)</p><p>Peak-to-peak voltage</p><p>Peak voltage</p>, <p>The ? value is the actual average of all the instantaneous voltage or current values</p><p>across a full cycle of a rectified sine wave.</p><p>a.</p><p>average</p><p>b.</p><p>effective</p><p>c.</p><p>peak</p><p>d.</p><p>RMS</p>, <p>The average value of halfwave rectified DC is ? times the peak AC value or one-half of</p><p>the average value.</p><p>a.</p><p>0.318</p><p>b.</p><p>0.637</p><p>c.</p><p>0.707</p><p>d.</p><p>1.414</p>, <p>Given the circuit, solve for the following: (Round the FINAL answers to two decimal</p><p>places.)</p><p>The parallel circuit has 42.4 peak volts applied, a given R resistance of 5,600 ohms,</p><p>and a peak current through R of 9 milliamperes.</p><p></p><p>What is the effective voltage? </p><p></p><p>What is the resistance of R ?</p><p></p><p>What is the peak current through R?</p><p></p><p>What is the total effective current?</p><p></p><p>What is the effective power consumed by this circuit? </p> flashcards
AC Systems Lesson 5

AC Systems Lesson 5

  • In a DC circuit, ? will oppose current flow.

    a.

    eddy currents

    b.

    resistance

    c.

    skin effect

    d.

    all of the above

    The correct answer is: resistance

  • In an AC circuit, ? will oppose current flow.

    a.

    eddy currents

    b.

    resistance

    c.

    skin effect

    d.

    all of the above

    The correct answer is: all of the above

  • Current passing through a resistance produces ? .

    a.

    a dissipation of power

    b.

    a voltage drop

    c.

    heat

    d.

    all of the above

    The correct answer is: all of the above

  • How can instantaneous AC current values be determined?

    How can instantaneous AC current values be determined?

    d.

  • What is the instantaneous value of a 10 ampere peak sine wave at 0, 30, 45, 60, and 180

    degrees?

    0° = ? amps

    30° = ? amps

    45° = ? amps

    60° = ? amps

    180° = ? amps

    0

    5

    7.07

    8.66

    0

  • Current and voltage in an AC resistive circuit are ? phase.

    a.

    in

    b.

    out of

    c.

    single

    d.

    three

    The correct answer is: in

  • Drag the appropriate current sine wave to the correct location to show an in-phaserelationship.

    Drag the appropriate current sine wave to the correct location to show an in-phase

    relationship.

    no answer

  • Given the circuit, solve for the following: (Round the FINAL answer to two decimal places,if needed.)What is the peak voltage for the circuit? What is the effective voltage for the circuit? What is the total power or wattage of the circuit?

    Given the circuit, solve for the following: (Round the FINAL answer to two decimal places,

    if needed.)

    What is the peak voltage for the circuit?

    What is the effective voltage for the circuit?

    What is the total power or wattage of the circuit?

    The correct answer is: 300 Volts

    The correct answer is: 212.13 Volts

    The correct answer is: 2250 Watts

  • Factors such as skin effect and eddy currents are present in an AC circuit and, in practice,

    ? the resistance of the conductor.

    a.

    decrease

    b.

    increase

    c.

    do not affect

    The correct answer is: increase

  • As frequency increases, skin effect ? .

    a.

    increases

    b.

    decreases

    c.

    stays the same

    The correct answer is: increases

  • Skin effect and eddy currents ? present in a DC circuit, and, therefore, will not be

    factors that affect the opposition to current flow in a DC circuit.

    a.

    are

    b.

    are not

    The correct answer is: are not

  • Skin effect can be ? by using stranded conductors, which provide greater surface area

    for current than solid conductors.

    a.

    reduced

    b.

    increased

    The correct answer is: reduced

  • The ? value of AC voltage will produce the same amount of power as a like value of DC

    voltage.

    a.

    average

    b.

    effective

    c.

    nominal

    d.

    peak

    The correct answer is: effective

  • When an AC voltage is given, it is always the ? value unless stated otherwise.

    a.

    average

    b.

    nominal

    c.

    peak

    d.

    RMS

    The correct answer is: RMS

  • Match the points on the sine wave that indicate the values in the table.Average voltageEffective voltage (RMS)Peak-to-peak voltagePeak voltage

    Match the points on the sine wave that indicate the values in the table.

    Average voltage

    Effective voltage (RMS)

    Peak-to-peak voltage

    Peak voltage

    d

    c

    a

    b

  • The ? value is the actual average of all the instantaneous voltage or current values

    across a full cycle of a rectified sine wave.

    a.

    average

    b.

    effective

    c.

    peak

    d.

    RMS

    The correct answer is: average

  • The average value of halfwave rectified DC is ? times the peak AC value or one-half of

    the average value.

    a.

    0.318

    b.

    0.637

    c.

    0.707

    d.

    1.414

    The correct answer is: 0.318

  • Given the circuit, solve for the following: (Round the FINAL answers to two decimalplaces.)The parallel circuit has 42.4 peak volts applied, a given R resistance of 5,600 ohms,and a peak current through R of 9 milliamperes.What is the effective voltage? What is the resistance of R ?What is the peak current through R?What is the total effective current?What is the effective power consumed by this circuit?

    Given the circuit, solve for the following: (Round the FINAL answers to two decimal

    places.)

    The parallel circuit has 42.4 peak volts applied, a given R resistance of 5,600 ohms,

    and a peak current through R of 9 milliamperes.

    What is the effective voltage?

    What is the resistance of R ?

    What is the peak current through R?

    What is the total effective current?

    What is the effective power consumed by this circuit?

    The correct answer is: 29.98 Volts

    The correct answer is: 4711 Ω

    The correct answer is: 7.57 mA

    The correct answer is: 11.72 mA

    The correct answer is: 351 mW