Question 1
The tool used to cut an external thread on a conduit is called a ? .
a. chuck
b. die
c. reamer
d. tap
The correct answer is: die
Question 2
A ? or file is used to remove the rough edge on the inside of a metal conduit after it has been cut.
a. die
b. reamer
c. threader
d. tap
The correct answer is: reamer
Question 3
Rigid and Intermediate Metal Conduit should be reamed before being threaded.
Select one:
True
False
The correct answer is 'True'.
Question 4
Which of the following is a way that threading dies may be used?
a. The conduit may be rotated by a machine into a stationary die.
b. Threading dies may be rotated by hand around the conduit.
c. Threading dies may be rotated by power around the conduit.
d. All of the above.
The correct answer is: All of the above.
Question 5
Die heads are made to be disassembled because they are lighter to hand carry in smaller pieces.
Select one:
True
False
The correct answer is 'False'.
Question 6
? should be applied during the threading process to keep die wear to a minimum.
a. Cutting oil
b. Lithium grease
c. Penetrating lubricant
d. WD-40
The correct answer is: Cutting oil
Question 7
It is not possible to damage conduit during the reaming process.
Select one:
True
False
The correct answer is 'False'.
Question 8
There are different types of threads that may be formed on rod, pipe, and conduit. The standard type of thread used on electrical conduit is the National Pipe Thread (NPT). The taper for this thread is ? inch per foot.
a. 1/4
b. 1/2
c. 5/8
d. 3/4
The correct answer is: 3/4
Question 9
Which of the following represents a style of handheld threader?
a. Non-ratcheting three-way threader
b. Ratcheting drophead threader
c. Ratcheting universal threader
d. a. and b.
e. a., b., and c.
The correct answer is: a. and b.
Question 10
Match the correct description to the corresponding letter in the illustration.
Options:
Chuck
Drive Shaft
Set Bolt
The correct answer is: A. → Drive Shaft, B. → Chuck, C. → Set Bolt
Question 11
Match the correct description to the corresponding letter in the illustration.
Options:
Front Chuck
Die Head
Pipe
Pipecutter
The correct answer is: A. → Front Chuck, B. → Pipecutter, C. → Die Head, D. → Pipe
Question 12
Identify Point A in the picture.
a. Bend radius adjustments
b. Die head adjustment graduations
c. Setpoint adjustment graduations
d. Tap adjustment graduations
The correct answer is: Die head adjustment graduations
Question 13
Match the correct description to the corresponding letter in the illustration.
Options:
Die Head
Die Pieces
The correct answer is: A. → Die Head, B. → Die Pieces
Question 14
Match the correct description to the corresponding letter in the illustration.
Options:
Die Head
Die Piece
The correct answer is: A. → Die Piece, B. → Die Head
Question 15
Match the correct description to the corresponding letter in the illustration.
Options:
Pipe Vise
Hand Ratchet
Die Head
The correct answer is: A. → Hand Ratchet, B. → Die Head, C. → Pipe Vise
Question 16
Match the correct description to the corresponding letter in the illustration.
Options:
Die Piece
Power Pony
Die Head
The correct answer is: A. → Die Piece, B. → Die Head, C. → Power Pony
Question 17
Match the correct description to the corresponding letter in the illustration.
Options:
Power Pony
Die Head
Oiler
The correct answer is: A. → Oiler, B. → Die Head, C. → Power Pony
Question 18
Match the correct description to the corresponding letter in the illustration.
Options:
Power Pony
Pipe Vise
Oiler
Die Head
The correct answer is: A. → Pipe Vise, B. → Power Pony, C. → Oiler, D. → Die Head
Question 19
Match the correct description to the corresponding letter in the illustration.
Options:
Safety Bracket
Pipe Vise
The correct answer is: A. → Safety Bracket, B. → Pipe Vise
Question 20
The picture illustrates pipe reaming.
Select one:
True
False
The correct answer is 'True'.
Question 21
The markings illustrated indicate a half standard thread has been cut on a large pipe mounted diestock.
Select one:
True
False
The correct answer is 'False'.
Question 22
The objects shown are tap pieces.
Select one:
True
False
The correct answer is 'False'.