ASMi-54L v.2.67 GA
ASMi-54L Ver. 2.5 – 2010 Slide 1
Agenda
•
•
•
•
•
•
•
•
Introduction
Product Overview
Applications
Feature Comparison
Product/Portfolio Value Proposition
Sales Tools On-Line
Ordering information
Summary
ASMi-54L Ver. 2.5 – 2010 Slide 2
AXCESS+ for Carriers
ASMi-54L Ver. 2.5 – 2010 Slide 3
Market Segments
Service
Providers
Transportation
& Utilities
Enterprise
City carrier,
alternative and
Incumbent carriers,
cellular, ISP
Highway, Railways,
Airports, Motorway,
Marine, Energy,
Oil/Gas, pipleline,
water
Insurance & Banks,
public safety,
Government,
university and
Military
Multi services
extension over
copper, multipoint
connectivity
Multi services
extension over
copper, multipoint,
daisy chain , ring
connectivity
Multi services
extension over
copper, multipoint
connectivity
ASMi-54L Ver. 2.5 – 2010 Slide 4
First Mile – Product Portfolio
SHDSL/SHDSL.bis CPE
Modems
• ASMi-52/52L
Transparent
SHDSL/SHDSL.bis Rack
• LRS -102 - Up to 96 E1’s & 24 ETH
Repeaters
• SHDSL/SHDSL.bis repeaters
• ASMi-54/ASMi-54L/54LRT
ports over HDSL/SHDSL.bis lines
• Indoor/outdoor units
• E1,ETH,Serial port
or 112 E1’s over fiber
• 2W/4W
(V35,X.21,RS-530)
• 2W,4W,8W
• LRS -16, up to 16 E1 to SHDSL
lines
ASMi-54L Ver. 2.5 – 2010 Slide 5
ASMi Introduction
Cost effective Solution
• Save additional modem - Extending up to dual services over long distance with
SHDSL/SHDSL.bis technology over 2W,4W,8W
• Save external switch/router – Four physical ETH ports with integrated switch/router
High Flexibility
• Varied services such as : V35,X21,E1/T1,ETH enable smooth connectivity
• Varied DSL rates support between 64kbps to 30Mbps.
Advanced ETH Capabilities
• QOS, OAM and rate limiting enable better provisioning and monitoring of the ETH services
• EFM bonding enable high reliability in case of failure of one of the DSL lines
Complete and single NMS Solution
• Full interoperability opposite the MP-4100 & LRS-102
• Single NMS solution from the central site to the remote sites
ASMi-54L Ver. 2.5 – 2010 Slide 6
ASMi-5x - General Application
FE
PBX
E1
ASMi-5x
2/4 wires
ASMi-5x
FE
PBX
E1
• ASMi-5x can operate as a CO device or a CPE device according to user
configuration
• The modem is used for point-to-point Ethernet and E1 service extension
over 2W and 4W and also over 8W for ETH connectivity
ASMi-54L Ver. 2.5 – 2010 Slide 7
Major Customers
City Carrier, Cellular, ISP, Alternative
Carrier, Incumbent Carrier
Insurance & Banks
Public Safety
Government
University
Military
Highway, Railways, Airports,
Motorway, Marine
Energy, Oil/Gas, Pipeline
Water, Mine
ASMi-54L Ver. 2.5 – 2010 Slide 8
ASMi-54L Introduction
• Managed modem transmitting at full-duplex data rates of up to
5.7 Mbps over 2-wire and 11.4 Mbps over 4-wire lines
• Dual Bearer mode for E1 and Ethernet HDLC over 2-wire and 4wire lines
• SHDSL bonding – for EFM: PAF according to IEEE802.3, for HDLC:
M-Pair according to G.991.2
• SHDSL ITU-T G.991.2 and ETSI 101524 compliance
• 4-port 10/100BaseT interface with integrated switch
• Fully compatible with ASMi-54 standalone modem
ASMi-54L Ver. 2.5 – 2010 Slide 9
General Application
4*FE
PBX
E1
ASMi-54L
2/4 wires
ASMi-54L
4*FE
PBX
E1
• ASMi-54L can operate as a CO device or a CPE device according
to user configuration
• The modem is used for point-to-point Ethernet and E1 service
extension at rates of up to 11.4 Mbps or up to 22.8 Mbps using
EFM bonding technology for ETH services.
ASMi-54L Ver. 2.5 – 2010 Slide 10
Physical View
One SHDSL
port, RJ-45
Optional One E1
port, RJ-45
Four ETH ports with
integrated switch
Wide range, AC/48VDC power supply
24 VDC power supply
ASMi-54L Ver. 2.5 – 2010 Slide 11
Main Features
Feature
Extended rate
Single segment (link) IEEE 802.32005former 802.3ah)
Description
Customer Benefits
• Up to 11.4 Mbps/ 15 Mbps
• Cost effective solution for Ethernet
services
• Special RAD proprietary solution
provides extended rates of up to
15 Mbps over 2-wire lines.
• Operation, Administration, and
Maintenance (OAM) - discovers
automatically if next hop supports
802.3ah and enable remote loopback
of all traffic, fault propagation and
connectivity check
•
EOC (Embedded Operational
Channel) management
Alarm masking
Remote loopbacks at the SHDSL
repeater
•
Monitoring alarms from the repeaters
•
Indication on the SHDSL/SHDSL.bis
repeaters on the chain
• Disables or enables the alarms on
each port
• Enables higher rate over only one
pair
• Detects line faults
• Measures performance on the
SHDSL line
• Enables clear and high reliability in
case of failure of one of repeaters
• Improved maintenance and
management control of the ETH,
E1 and SHDSL alarms
ASMi-54L Ver. 2.5 – 2010 Slide 12
Main Features
Feature
Description
Customer Benefits
Rate limiting
• Limits the ingress data rate on each
Ethernet port
• Enables control and better
utilization of the ETH traffic
Single IP support
• LRS-102 uses Single IP (defined in
central LRS-102 or MP-4100) to manage
remote modems (via RADview only)
• Prevent the need to define many
IP address at the remote sites
Dying Gasp
• ASMi-54L reports power failures
to the specified network management
stations by sending
an SNMP trap
• Helps a service provider identify
and isolate the end-point device
experienced a power failure
DHCP (Dynamic Host Configuration
• Automates network parameters
Protocol)
assignment to network devices
from one or more DHCP servers
BPDU (Bridge
Protocol Data
Unit)
• BPDU messages are exchanged
across bridges to detect loops in
a network topology
• Simplifies host configuration
• Eliminates wrong network
parameters configuration
ASMi-54L Ver. 2.5 – 2010 Slide 13
ASMi-54/54L – Key Selling Points
More bandwidth
• Higher rate of 5.7 Mbps over 2W
• Enables selectable bandwidths up to maximum rate of 11.4 Mbps
over 4-wire
• Up to 22.8 Mbps over 8W with ASMi-54
• Special RAD proprietary solution, up to 11.4 Mbps/15 MBPS over
one pair
Varied of Services
• Dual services over one or two pairs
• Four ETH ports with integrated switch and optional E1 port
Save more on OpEx
• One box for multiple services
• Easily managed
• Saves external switch in case of 4 ETH ports
ASMi-54L Ver. 2.5 – 2010 Slide 14
Higher ETH Rate over DSL Lines –
11.4Mbps over one Pair
ETH
ETH
ETH
ETH
ASMi-54L
ASMi-54L
2 wire
ETH
ETH
11.4/15 Mbps
ETH
ETH
• Higher rate
– Extended rate with RAD proprietary solution – 11.4/15 Mbps over 2 wire or
up to 30 Mbps over 4 wires
• Estimated Distances – Free of noise
– 11.4 Mbps over 2 wires, 26AGW, ~ 1km
ASMi-54L Ver. 2.5 – 2010 Slide 15
Ethernet OAM Tools
Single segment (link)
IEEE 802.3ah
• Discovery
• Connectivity check
• Fault propagation
End-to-end 802.1ag
ITU-T Y.1731
• Continuity check
• Loop back
• Link trace
Fault monitoring and
performance
measurement
ITU-T Y.1731
• Frame Delay
• Frame Delay Variation
• Frame Loss and Availability
• 15 min PM statistics
√
ASMi-54L/LA-210
√
LA-210
√
LA-210
ASMi-54L Ver. 2.5 – 2010 Slide 16
OAM – Operations
Administration & Maintenance
ETH
ETH
ETH
ETH
ASMi-54L
ETH
ETH
ASMi-54L
2 wire
802.3ah(Access link)
ETH
ETH
• Single segment (link) according to IEEE 802.3ah, enable:
• Discovery
• Connectivity check
• Fault propagation
ASMi-54L Ver. 2.5 – 2010 Slide 17
OAM – Operations
Administration & Maintenance
• Single segment (link) according to IEEE 802.3ah:
 Passive and Active functionality modes supported.
 Discovery - ASMi54L device will automatically detect if
attached device supports OAM (802.3ah) and present the
following information: OAM configuration, OAM mode, OAM
PDU configuration and Platform Identity by MAC address.
 Connectivity check - in case of OAM supported, the
ASMi54L can provide details regard connectivity. It count
number of seconds that connectivity were lost. The granularity
is 1-10 frames every second.
ASMi-54L Ver. 2.5 – 2010 Slide 18
EOC Management Opposite
SHDSL.bis Repeaters
ETH
ETH
ETH
ETH
ASMi-54L
PFH-4
S-RPT
ASMi-54L
ETH
ETH
2w up to 4w
ETH
ETH
• Monitoring and controlling SHDSL.bis repeaters
– Enable remote loopback at the SHDSL repeater
– Monitoring alarms from the repeaters
– Indication on the SHDSL.bis repeaters on the chain
ASMi-54L Ver. 2.5 – 2010 Slide 19
Typical Applications
• Highway – Road Communications
• Utilities – sites connectivity sites
• Service providers – City carrier
• Carrier Traffic – Ethernet and TDM Services over Copper or Fiber
ASMi-54L Ver. 2.5 – 2010 Slide 20
Highway Communications
Customer Needs
• Connecting message sign and road barrier system to stop the traffic in case
of an emergency
• Video camera connectivity for security and control
ASMi-54L
ASMi-54L
4 x ETH
ASMi-54L
ASMi-54L
SHDSL
5.7 Mbps
SHDSL
ASMi-54L
SHDSL
4 x ETH
ETH
CCTV
ETH
ETH
RADview
Customer Benefits
ASMi-54L
SHDSL
5.7 Mbps
ASMi-54L
ETH
CCTV
• Manageable single unit
• Up to 4 ETH ports to stop traffic in case of an emergency
• Video camera connectivity for security and control
ASMi-54L Ver. 2.5 – 2010 Slide 21
Utilities – Site Connectivity
•
•
•
•
Single box solution for multiple services
TDM + Ethernet central solution
Any infrastructure
Resilient topologies
Teleprotection
PBX
Voice
SCADA
MP-2100
Voice
E1
Ring
Control Center
Analog/Digital Voice/SCADA,
Ethernet
MP-4100
FCD-IP
STM-1
Teleprotection
MP-4100
IP/MPLS
FCD-155E
MP-4100
GbE
SCADA
ETH
Voice
SCADA
SDH/SONET
Voice
E1/T1
MP-2100
E1/T1
Airmux-200
MP-4100
SCADA
SHDSL
FCD-155E
Fiber
Airmux-200
MP-2100
SHDSL.Bis
ASMi-54L
PBX
PBX
OP-106/8
ASMi-54L Ver. 2.5 – 2010 Slide 22
Service Providers – City Carrier
Customer Needs
• Centralized solution with management
• Variety of access technologies and devices
• Same equipment for both fixed and cellular networks
Customer Benefits
• Single management
• Scalable solution
• Unique solution: SHDSL concentrator
with Gigabit Ethernet uplink
BSC
BTS
ASMi-52L
E1
GSM Traffic
GSM Traffic
SHDSL
SHDSL
BTS
ASMi-52L
E1
E1s
Large PoP
BTS
ASMi-52L
E1
PC
STM-1
Megaplex-4100
TDM
Network
E1s
Small PoP
BTS
ASMi-52L
LRS-102
ASMi-54L
E1
PC
ASMi-54L
ETH
ETH
Cisco 7000
LAN
ETH
GbE
LAN
IP/ETH
Network
ASMi-54L/RT
SHDSL
LAN
Data Traffic
ASMi-54L/RT
Data Traffic
LAN
SHDSL
ASMi-54L Ver. 2.5 – 2010 Slide 23
City carrier – Ethernet and TDM
Services over Copper or Fiber
Customer Needs
• Connecting different services over their infrastructure
• Enable high capacity aggregation device at the PoP
• Simple and single multi-functional platform
Customer Benefits
• Reduce OpEx/CapEx using a multiservice
aggregation device at the PoP
• Both E1 and ETH services over single fiber
• Ensure SLA by providing advance ETH
services with QoS
Internet
Customer A
Customer A
FE
FE
OP-108
OP-108
FO Link
FO Link
E1
NMS
E1
GE
Customer B
FE
ASMi-54L
SHDSL.bis
E1
Customer B
GE
MP-4100
STM-1
SDH
Network
SHDSL.bis
STM-1
FE
ASMi-54L
E1
MP-4100
Customer C
RICi-4E1
FE
n x E1
n x E1
Customer C
RICi-4E1
FE
ASMi-54L Ver. 2.5 – 2010 Slide 24
Pico-DSLAM
ETH Connectivity over Copper
Target Market :
• Campuses, banks, ISP
ASMi-54L
2w
4 x ETH
5.7 Mbps
2w
PSN
ETH
ASMi-54
ASMi-54L
4 x ETH
5.7 Mbps
ASMi-54L
2w
4 x ETH
5.7 Mbps
2w
ASMi-54L
4 x ETH
5.7 Mbps
Key Benefits:
• Single or Dual ETH fiber in the central site
• Cost-effective solution
• Transmission via VLAN differentiation
ASMi-54L Ver. 2.5 – 2010 Slide 25
Pico DSLAM for ETH connectivity
RAD Advantages:
• Multiport Ethernet switch in CPE device, no need for additional switch
• Single-box solution for 4 modems at the remote site
• Advanced Ethernet performance enables differentiation toward the PSN network
• Ethernet uplink over fiber or copper enables reaching great distance over any media
• Single management system for CPE and central devices
ASMi-54L
2w
4 x ETH
5.7 Mbps
ASMi-54L
4 x ETH
2w
PSN
Fiber
or copper
ETH
ASMi-54
5.7 Mbps
ASMi-54L
2w
4 x ETH
5.7 Mbps
ASMi-54L
2w
Customer Benefits:
•
•
4 x ETH
5.7 Mbps
CapEX saving:
– Single box for 4 remote sites
– Single box reduce “real-estate”
OpEX saving :
– Training:
• One box for all services
• One management system for CPE & Central- easier operation
ASMi-54L Ver. 2.5 – 2010 Slide 26
Interoperability opposite Huawei
HONET UA5000
Huawei NMS
ADSL
IP/MPLS
FE/GBE
ETH
Honet UA5000
POTS/ISDN
PSTN
E1
SHDSL
TDM
E1/STM-1/4
SHDSL
ASMi-52
E1
ASMi-54L
ETH
• Customer Type : Huawei’s HONET “holders “
• Replacing low cost CPE’s vendors (Taiwanese), providing a
complete solution to Huawei
ASMi-54L Ver. 2.5 – 2010 Slide 27
Feature Comparison Table
ASMi-52
ASMi-52L
ASMi-54
ASMi-54L
ASMi-54LRT
Maximum data
rate (Mbps)
2.3/4.6
2.3/4.6
5.7/11.4/22.8
5.7/11.4
5.7/11.4/22.8
Interface
E1,ETH,V35,X.21
E1,ETH,4ETH,V35,
X.21
E1,4ETH,4E1*
* version 3.5
E1,ETH
E1,ETH
Max. Interfaces
2
1
2
2
2
Router
N/A
N/A
N/A
N/A
Available
Line
2W/4W
2W/4W
2W/4W/8W
2W/4W
2W/4W/8W
ASMi-54L Ver. 2.5 – 2010 Slide 28
Ordering Information
Ordering Option
Description
ASMi-54L/4ETH/2W
Managed SHDSL.bis modem, four physical ETH ports(RJ-45), one pair, wide range
power supply (VAC & 48 VDC)
ASMi-54L/4ETH/2W/E1
Managed SHDSL.bis modem, four physical ETH port (RJ-45), one E1 port (RJ-45), one
pair, wide range power supply (VAC & 48 VDC)
ASMi-54L/4ETH/4W
Managed SHDSL.bis modem, four physical ETH ports (RJ-45), two pairs, wide range
power supply (VAC & 48 VDC)
ASMi-54L/4ETH/4W/E1
Managed SHDSL.bis modem, four physical ETH port (RJ-45), one E1 port (RJ-45), two
pairs, wide range power supply (VAC & 48 VDC)
ASMi-54L/24V/4ETH/2W
Managed SHDSL.bis modem, four physical ETH ports(RJ-45), one pair, 24 VDC power
supply
ASMi-54L/4ETH/2W/E1/ETR
SHDSL.bis modem, four physical ETH port (RJ-45), one E1 port (RJ-45), one pair, wide
range power supply (VAC & 48 VDC), extended temperature support -20º to 70ºC.
ASMi-54L-LIC/HR
License key for high data rate
ASMi-54L Ver. 2.5 – 2010 Slide 29
Management
• RADview-EMS is a unified carrier-class management platform for
RAD devices using a variety of access channels as SNMPv1/3,
HTTP/S, TFTP and Telnet/SSH. In addition, it features third-party
device monitoring capabilities
ASMi-54L Ver. 2.5 – 2010 Slide 30
RADview-EMS Advanced FCAPS
Fault Management
• Detects and isolates faults in network devices, initiates remedial actions and
distributes alarm messages to other management entities in the network.
Configuration Management
• Enables operators to configure, install and distribute software to all devices across
the network. In addition, the system tracks version changes and maintains
software configuration history
Accounting Management
• Manages individual and group user accounts and passwords, generating network
usage reports to monitor user activities.
Performance Management
• Supports real-time monitoring of QoS and CoS, producing real-time and periodic
statistics. The statistics collector compresses data to minimize bandwidth use for
management traffic and exports CSV files to OSS or third-party management
systems
Security Management
• Allows network administrators to track user activities and control the access to
network resources with a choice of security features
ASMi-54L Ver. 2.5 – 2010 Slide 31
RADview-EMS
FCAPS
Fault
Configuration
Administration
Performance
Security
● Manage Event Log parameters
● Manage the way Events are displayed in the Event Browser
● Manage system response upon occurrence of specific Events.
● Trap Synchronization upon connection failure between RADview-EMS to NE (*supported devices only)
● Modify – Mask, Severity, Duplication, Forwarding, Threshold, Clearing, Formatting
ASMi-54L Ver. 2.5 – 2010 Slide 32
RADview-EMS
FCAPS
Fault
Configuration
Administration
Performance
Security
● Realistic representation of the devices (shelf-view)
● Tracks configuration changes
● Configures, installs, and distributes software and configuration files across the network
● Viewing and/or modifying configuration (system, ports, and alarms)
● Enables viewing the diagnostics and status information
Web
Shelf-View
ASMi-54L Ver. 2.5 – 2010 Slide 33
RADview-EMS
FCAPS
Fault
Configuration
Administration
Performance
Security
● Audit trails for Security, System and Applications activities
● Tracks and log the shelf-view user activity
● Create and manage user accounts and groups
● Manage various server setting
Security logs
Applications activities
ASMi-54L Ver. 2.5 – 2010 Slide 34
RADview-EMS
FCAPS
Fault
Configuration
● Monitors network performance (QoS, CoS)
Administration
Performance
Security
Statistics
● Current statistics (Real-time)
● Intervals statistics
● Reflects Agent statistics
● RADview statistics collector
(*supported devices only)
– Collect and compress the data
– Retrieved lost data upon connection failure
– Minimizing management traffic
– Exports CSV ASCII files for OSS
ASMi-54L Ver. 2.5 – 2010 Slide 35
RADview-EMS
FCAPS
Fault
Configuration
Administration
Performance
Security
● View and manage EMS Security profiles in a graphical interface.
● Create and edit security profiles.
● Create Common/Private view profiles per user/group
● Collects accounting data and generates network usage reports
● Define password policies
Security profiles
Password policy
ASMi-54L Ver. 2.5 – 2010 Slide 36
Device Management
• RAD products support the following management
capabilities
● SNTP
● Out-of-band MNG port
● Menu driven terminal
● In-band mgt
● TACACS+
● ICMP
● TFTP
● Web-GUI
● SNMP v1
ASMi-54L Ver. 2.5 – 2010 Slide 37
Sales Tools
• Web Sites
• Brochures
ASMi-54L Ver. 2.5 – 2010 Slide 38
Sales Tools cont…
• Case Studies
• Application Notes:
ASMi-54L Ver. 2.5 – 2010 Slide 39
Sales Tools cont…
• Video
• Calculators
ASMi-54L Ver. 2.5 – 2010 Slide 40
Summary
• Higher rates enable us more opportunities for more applications
in the market
• Improving Ethernet capabilities such as OAM or Ethernet port
limitations enable the service provider better utilization
• Cost-effective solution together with complete solution from the
central side enable one single management and reduce
OpEx/CapEx dramatically
ASMi-54L Ver. 2.5 – 2010 Slide 41
Thank You
For Your
Attention
www.rad.com
ASMi-54L Ver. 2.5 – 2010 Slide 42