A CANADIAN COMPANY
Providing Complete Power
Solutions for Mission Critical
and Industrial Applications
Evolution
Wilfred Frey, the Founder and former President of Tycor
International, came out of retirement in 1996 to
incorporate a company that would provide cutting edge
technology, a consistent high standard of quality
combined with a high level of service at competitive
prices.
Always "On" UPS Systems Inc.
Philosophy
Always “On” provides:
•State of the Art, Cutting Edge Technology
•High Quality Products
•Maintained High Level of Service
•Minimum MTBF (5 yrs min.)
•Guaranteed NO D.O.A.
Product Technologies
UPS Systems
Back-up/Standby (Antiquated Technology – No Longer Manufactured)
Line Interactive UPS Systems
Dual Conversion On-line UPS Systems
AC to DC UPS systems
Frequency Converters (Electronic)
Convert 50/60/400Hz In to 50/60/400Hz Out
UPS Peripherals
Smart Electrical Distribution Panel
Wrap Around Bypass
Power Quality Products
Low Pass Series Filters
Transient Voltage Surge Suppressors (TVSS)
Isolating Line Filters
Power Problems/Solutions
All Always “On” UPS Systems Incorporate TVSS and LPS Filters
Competitive Advantage
Always “On” Provides “Totally” Filtered
Protection
UPS Features & Functions
INPUT AND OUTPUT NOISE FILTERS
NETWORK AND MODEM PROTECTION
INTELLIGENT COMMUNICATIONS INTERFACE
(RS-232 & Dry Contact, Optional SNMP Adapter or AS-400)
PLUG AND PLAY NETWORK SOFTWARE
COLD START FROM BATTERY
AUTO RESTART AFTER EXTENDED BLACKOUT
USER FRIENDLY BATTERY REPLACEMENT
AUTO FREQUENCY DETECTION
Commercial Series UPS’s
Square Wave (PWM) Output
The LIMOUSIN
The LIMOUSIN II
Commercial Series UPS’s
Square Wave (PWM) Output
Small Office / Home users
Personal Computers
Servers
Point of Sale Equipment
LINE INTERACTIVE
“V” or “L” Series
V Series (PWM Wave Output On Battery)
L Series (True Sine Wave Output Continuous)
LINE INTERACTIVE
“V” Series
PWM Sine Wave Output (when on battery)
The “V” Series line interactive technology provides regulated, filtered AC utility to the loads
until a blackout condition occurs. At this point the inverter converts the DC voltage to AC
power which, in turn, is supplied to the loads.
LINE INTERACTIVE
“L” Series
True Sine Wave Output Continuous
The“L” Series line interactive technology provides regulated, filtered AC utility to the loads
until a blackout condition occurs. At this point the inverter converts the DC voltage to AC
power which, in turn, is supplied to the loads. The CPU synchronizes the inverter to the AC
utility so when a problematic power condition occurs the inverter will supply power within the
same waveform as the utility instead of restarting at the zero crossing.
LINE INTERACTIVE
“V” or “L” Series
Commercial & Light Industrial Applications
LAN File Servers,
Personal Computers,
Workstations,
Network Routers,
Hubs and Switches
Security Systems
Test Equipment,
Automated Teller Machines,
Telecommunications,
Use the “L” Series whenever True Sine Wave output,
Extended Runtime or
SNMP network communication are required.
DIN RAIL MOUNTED UPS
Designed to provide back-up in
a convenient Din Rail mounted
container.
System has optional extended
back-up time and DC switcher
module to allow for both
120VAC and 24VDC at various
different current ratings so you
are only required to purchase
one power supply system.
Dual Conversion On-Line UPS
Side Mount
NEMA 12
Cabinet
Types
Rack-mount
3 Phase 208-600V 10 - 160kVA
Dual Conversion On-Line UPS
Modes of Operation
Online Mode
Back-Up Mode
Static Bypass
Maintenance/Manual Bypass
External Maintenance Bypass
Dual Conversion On-Line UPS
Modes of Operation
Online Mode
Back-Up Mode
Static Bypass
Maintenance/Manual Bypass
External Maintenance Bypass
Dual Conversion On-Line UPS
Modes of Operation
Online Mode
Back-Up Mode
Static Bypass
Maintenance/Manual Bypass
External Maintenance Bypass
Dual Conversion On-Line UPS
Modes of Operation
Online Mode
Back-Up Mode
Static Bypass
Maintenance/Manual Bypass
External Maintenance Bypass
Dual Conversion On-Line UPS
Modes of Operation
Online Mode
Back-Up Mode
Static Bypass
Maintenance/Manual Bypass
External Maintenance Bypass
Dual Conversion On-Line UPS
Supplied AC Utility converted to DC, inverted to AC via inverter
providing clean, noise free power.
Due to this conversion AC supplied from the Inverter, the
connected Loads are “Always” isolated from the dirty AC supply!
Available from 700VA single phase configurations up to 250kVA
three phase configurations.
Isolation Transformers are standard for systems 5kVA and up.
Communications interface, SNMP slot and AS-400 slot included.
LCD Display.
Logging capabilities and user programmable communication ports
Dual Conversion On-Line UPS
OPTIONS:
External Wrap Around Maintenance Bypass (EMBP)
EMBP - with Isolation Transformer and Kirk-Key Interlock
Extended Runtime Cabinets
Remote Monitoring Panel
Remote Emergency Stop
Communication Interfaces (SNMP, AS-400, Relay I/O)
Output Distribution Panel (GENIE)
Extended Warranty and 3rd Party Service Agreements
Wet Cell Batteries (Flooded) (5 and 10 yr Warranties)
Dual Conversion On-Line UPS
For all CRITICAL Applications.
Medical Industry, Military Industry,
Pulp and Paper Industry,
Oil and Gas Industry
Emergency Lighting
Blood Analyzers, Life Support systems,
Forensics, Robotics, PLC’s, etc.
Virtually all commercial, industrial,
medical and military applications
require “clean and stable” AC supply and
100% run time.
Always “On” UPS’s Address
1 Harmonic Distortion
Always “On” UPS’s Address
1 Harmonic Distortion
2 Switching Transients
Always “On” UPS’s Address
1 Harmonic Distortion
2 Switching Transients
3 Line Noise
Always “On” UPS’s Address
1 Harmonic Distortion
2 Switching Transients
3 Line Noise
4 Frequency Variations
Always “On” UPS’s Address
1 Harmonic Distortion
2 Switching Transients
3 Line Noise
4 Frequency Variations
5 Power Surges
Always “On” UPS’s Address
1 Harmonic Distortion
5 Power Surges
2 Switching Transients
6 Power Sags
3 Line Noise
4 Frequency Variations
Always “On” UPS’s Address
1 Harmonic Distortion
5 Power Surges
2 Switching Transients
6 Power Sags
3 Line Noise
7 High Voltage Spikes
4 Frequency Variations
Always “On” UPS’s Address
1 Harmonic Distortion
5 Power Surges
2 Switching Transient
6 Power Sags
3 Line Noise
7 High Voltage Spikes
4 Frequency Variations
8 Brownouts
Always “On” UPS’s Address
1 Harmonic Distortion
5 Power Surges
9 Power Failures
2 Switching Transients
6 Power Sags
3 Line Noise
7 High Voltage Spikes
4 Frequency Variations
8 Brownouts
“PLC” 2+2 and 2+0 Protector
The PLC 2+0 offers AC protection only.
The PLC 2+2 offers AC & DC protection as
well as Data Line Filtering.
Dry Contact (Forms A, B and C) are
available
Data Line Protection.
Industrial LANs
Twisted Pair, 3 wire up to 100 Mb/sec
ModBus+, DH+
RS-485 and RS-422
Din Rail
“GENIE” UPS Powered Smart Panel
Designed to identify a overload condition and clear
the SDB in less than 1 cycle preventing a damaging
and/or dangerous short circuit.
“GENIE” SDB’s are designed to clear or open
within 1 cycle eliminating the “time window” (18
to 22 cycles) which allows the short circuit
evolution of problems to begin.
“GENIE” SDB’s intelligent design allows for
distinguishing the difference between normal
inrush current and a short circuit or overload
condition.
“GENIE” SDB’s are simple plug-in Breaker
design, for easy upgrade or replacement.
“GENIE” communications available for
Controller monitoring and alarm.
ELECTRICAL SERVICE
ENTRANCE
TVSS FILTER - 1Ø & 3Ø models
Protects Electrical Service
Entrance and Sub-Panels
Against:
Massive surge impulses,
indirect
lightning strikes,
Common & normal mode noise,
spikes, transients,
Low Frequency harmonics
Available from 60kA to 600kA
surge current
ELECTRICAL SERVICE
ENTRANCE
TVSS FILTER - 1Ø & 3Ø models
1 Ø or 3 Ø
Delta or Wye, up to 600 volts
Commercial and Industrial applications.
Removable phase/fuses,
Self Diagnostics - LED Indicators per phase.
Optional: Surge Counter, Dry Contact Form
C and Fault Test Button.
TTF/ILF Isolating Line Filter
Total Isolation with low pass series
filtering
Re-establish “0” volts ground
references
Eliminate 100% of Common Mode
Noise
Automatic/Manual Bypass
The AMB unit is designed as a wrap-around
bypass with automatic or manual transfer
from UPS power to utility to allow for
maintenance or repair of the UPS system
without interruption of the load.
This bypass is designed to supply UPS
power and in the event that the UPS power
is lost the AMB will automatically switch to
bypass mode and continue to supply “AMB
conditioned” utility AC to the load. The
communications (optional) will notify the
connected equipment that the UPS is no
longer supplying power, but the loads have
not been effected.
The “Bull”
Automatic Voltage Regulating Power Bar
Auto Regulation: Boost and
Buck features with
Brownout and Over-voltage
protection (Transformer Based)
Surge, Spike, Noise, and
Transient Protection.
Six (6) 5-15R Outlets
(4 Normal and 2 AC Adapter Outlets)
Output rating is 1000W
DC UPS Systems
A DC-UPS system designed to
convert the utility AC to DC.
In the event of a power loss the
DC UPS will supply back-up
power to the DC load.
Std. Back-up time approx. 3
hours.
Features: Auto-Restart;
Diagnostic LED’s; Wall-mount
or tower models available.
Benefits
Engineered Solutions
Engineered systems to fit user requirements.
Maintained High Quality Products.
Maintained High standard of service.
Continual upgrading of products to maintain
cutting edge technology.
Thank-You!
We appreciate your time and attendance.