Smart led and leds go technology
Levi Eshkol 57/3, Tel Aviv, Israel
www.smart-led.net
1 SEMS Smart Street Light System
CONTENTS
2 Worldwide Projects
1
CONTENTS
SEMS Smart Street Light System

•
•
•
SEMS Introduction
SEMS System Architecture
How does it work?
SEMS Main Functions

•
•
•
Products
Central Monitoring Software
Data Concentrator
Lamp Controller

•
•
•
•
Solutions
SEMS Powerline
SEMS Wireless
SEMS Solar
SEMS Tunnel
2 Worldwide Projects
SEMS Introduction (Smart Energy Management System)
SEMS is a remote lighting management solution that offers you detailed, lamp-level
management capabilities.
The right amount of light is provided where and when needed, as you will be able to turn ON
/ OFF or dim every street light in your city, manually or according to pre-set area schedules.
Using the existing infrastructure, you will have live detailed information over the grid
and transform the existing distribution network into an intelligent infrastructure of
the future.
In-depth grid management gives an accurate real-time system map, feedback for any change
occurring along the grid, reduces energy loss and offers advanced maintenance optimization
tools. But how does SEMS actually work?
SEMS System Architecture
How does it work?
TURNING THE STREET LIGHTS ON AND OFF
SEMS offers lamp-level management capabilities
for all the lights. Clients can switch off and on
individual lights according to pre-programmed
schedules.
DIMMING THE LIGHTS
It can considerably reduces energy consumption
and CO2 emissions to dim lights to lower levels in
mid-nights when traffic are less. You will not only
save money, but also reduce light pollution.
COMMUNICATING THROUGH THE GRID
SEMS communicates using PLC (Power Line
Communication) or Zigbee between the
lamps and the power supply cabinets, and using
any IP-based communication solution available
between the cabinets and the mainframe. There is
no need to use any civil works to install the system.
SENSING THE CITY
The street light networks managed by SEMS are
continuously under power, therefore, there are a
lot of sensors can be added on the existing
infrastructure, thus transforming the street lighting
grid into a smart city platform for the future.
OPEN PROTOCAL OF CMS
There are two options for CMS, clients are free to
choose SEMS software, or CMS from Street light
Vision which is an open third party software
adopted by various of hardware companies.
REPORTING & MAINTENANCE SCHEDULING
SEMS CMS offers advanced analytic tools, failure
reporting, customizable maintenance planning,
automatic daily backups and recovery procedures
for a seamless functioning of the system.
LAMP LEVEL
SEMS lamp controllers (RTUs) manage and monitor every lamp in the city, performing
ON/OFF switching
and dimming functions, in addition to detailed feedback and error reporting.
POWERLINE /ZIGBEE COMMUNICATION
The communication between the data concentrators (CCs) and the lamp controllers
(RTUs) are made via Power Line Communication (PLC) or Zigbee.
CONCENTRATE LEVEL
Concentrators are deployed in the electric distribution cabinets, it receives all the
software commands and consequently manages the lamp controllers (RTUs), but also
gathers all the information from the lamp controllers, analyzes, prioritizes, compresses
and feeds it to the SEMS software.
IP BASED COMMUNICATION
Communication between electric distribution cabinets (where the Concentrators are
installed) and central monitoring software is performed via any IP-based communication
available, Ethernet or WCDMA/GPRS.
SOFTWARE CONTROL LEVEL
SEMS CMS is a integrated Network Management Software that allows the remote
control of the street lighting system and 24/7 grid monitoring.
SEMS Main Functions
Energy Conservation
 Adjusting lamps illumination to a configured level at midnight;
 30% extra energy saving by dimming function;
 Configure illumination levels according to requirements of roads,
time, date;
 Lamp dimming will lengthen lamp lifetime.
Five Function
 Easy remote management, control, test, signal communication,
dimming, and inspection;
 Cellphone control (GSM mode, use together with GSM modem.)
System Requirements for Cellphone Control
•
Android recommended (IOS pending)
•
GSM card required
•
GSM modem required
Safety Protection
 Detect lamp failure/ theft, report alarm, lengthen lamp lifetime
30%.
 Report over-load circuit and alarm;
 Alarm notice: Server, cellphone message, email.
Wisdom Management
 Data collection and create report, analyze data efficiently
 Energy saving reports in Excel and graphs format, easy export
Quick Maintenance
 Detect failure and alarm, save labor cost for touring the roads.
 Save maintenance cost 50%.
1
CONTENTS
SEMS Smart Street Light System

•
•
•
SEMS Introduction
SEMS System Architecture
How does it work?
SEMS Main Functions

•
•
•
Products
Central Monitoring Software
Data Concentrator
Lamp Controller

•
•
•
•
Solutions
SEMS Powerline
SEMS Wireless
SEMS Solar
SEMS Tunnel
2 Worldwide Projects
Central Monitoring Software
The software runs on the host computer, it serves as the
platform to control and manage the system, to collect
measured data (current, power consumption, alarm, etc.) and
monitor the status of the lighting system.
Data Concentrator
SEMS-CC08 is an Enhanced Central Controller based on ARM9
platform. It provides interfaces and ports (e.g. TCP/IP) to the
host computer for various applications, while managing an
intelligent control network consisting of many terminal nodes
over power lines or Zigbee network。
Lamp Controller
The Remote Terminal Units (RTU) receive commands from a
Concentrator to power on/off/dim the lamp, monitor the
status of the lamp and transmit the data back to the
Concentrator. It communicate with data concentrator via
power lines or Zigbee network.
Powerline Lamp Controller
• Used for controlling street lights via power lines.
• Installed in inspection cabinet of lamp pole or in the luminaire.
Wireless Lamp Controller
• Used for controlling street lights via Zigbee wireless network.
• Installed on top of lamp pole or in the luminaire.
Solar Light Controller
• Used for controlling solar treet lights via Zigbee network.
• Installed on top of lamp pole or in the luminaire.
Technology Capacities
• IOTCOMM solution transforms road lights into intelligent, energy-efficient, remotely
managed networks that deliver dependable lighting at 30% less cost than luminaires
alone.
• SEMS system paves the way for Smart City, when it’s working with various of
environment sensors.
• Supply on-line technique guidance and training course free of charge.
• Full solutions for sodium, LED, HID, solar lights, etc.
• Compliance with wide range of power transformers and ballasts including Philips,
Osram, Meanwell, Inventronics, MOSO, etc.
• More than 300,000pcs lamp controllers are operating in hundreds of cities, helping
utilities manage the lamps in a energy-efficient way, and free of labor touring.
• Offer OEM and ODM service, reference are Philips solar team, and Dazzeltek of
Neitherlands for its wireless system.
1
CONTENTS
SEMS Smart Street Light System

•
•
•
SEMS Introduction
SEMS System Architecture
How does it work?
SEMS Main Functions

•
•
•
Products
Central Monitoring Software
Data Concentrator
Lamp Controller

•
•
•
•
Solutions
SEMS Powerline
SEMS Wireless
SEMS Solar
SEMS Tunnel
2 Worldwide Projects
SEMS Powerline System









Lamp metering
Real time control
Lamp fault diagnosing
On / off / dim schedules
Powerline fault diagnosing
Energy saving reports
Support video system
3 phase power metering
Support environment
sensors
 Work as Smart City
platform
SEMS Powerline System--------Case Study
Location: Shenyang, PRC
Time: 2013
Luminaire: LED
Quantity: 14,000 units
Road: 135KM freeway
SEMS Wireless System





Lamp metering
Real time control
Lamp fault diagnosing
On / off / dim schedules
Energy saving reports




Support video system
3 phase power metering
Support environment sensors
Work as Smart City platform
SEMS Wireless System--------Case Study
Location: Santiago, Chile
Time: 2014
Luminaire: LED
Quantity: 20 units
Road: pilot
SEMS Solar System






Lamp metering
Real time control
Lamp fault diagnosing
On / off / dim schedules
Powerline fault diagnosing
Energy reports




3 phase power metering
Support environment sensors
Auto-run function
Battery charge & discharge control
SEMS Solar System--------Case Study
Location: Delingha, Qinghai,
PRC
Time: 2014
Luminaire: LED + solar
Quantity: 2,000 units
SEMS Tunnel System






Lamp metering
Real time control
Lamp fault diagnosing
On / off / dim schedules
Powerline fault diagnosing
Energy saving reports





Support video system
Support vehicle detector
Support light sensor control
3 phase power metering
Support environment sensors
SEMS Tunnel System--------Case Study
Location: Xiamen, PRC
Time: 2014
Luminaire: LED
Quantity: 3,000 units
SEMS Industrial System








Lamp metering
Real time control
Lamp fault diagnosing
On / off / dim schedules
Energy saving reports
3 phase power metering
Support motion sensors
Support light sensor
control
SEMS Industrial System--------Case Study
Location: Malaysia
Time: 2014
Luminaire: LED highbay
Quantity: 200 units
1 SEMS Smart Street Light System
CONTENTS
2 Worldwide Projects
3 IOTCOMM Introduction
City Road Lighting Smart Control
Stuttgart, Germany
200pcs
LED lamps
April 2011
Unilumin provided
City Road Lighting Smart Control
Turkmenistan
4000pcs
LED lamps
May 2013
Client provided20
City Road Lighting Smart Control
Tehran, Iran
200pcs
LED lamps
May 2014
Client provided
City Road Lighting Smart Control
Israel
36pcs
LED lamps
Mach 2014
Client provided
City Road Lighting Smart Control
Guangzhou-Shenzhen
Highway, Guangdong, PRC
7000pcs
LED lamps
June 2010
Unilumin provided
City Road Lighting Smart Control
Xiamen, Fujian, PRC
2000pcs
HPS lamps
Sep. 2011
Client provided
City Road Lighting Smart Control
Yunxiao, Fujian, PRC
5000pcs
LED lamps
Oct. 2013
Client provided
Tunnel Light Smart Dimming System
Gansu, China
1578pcs
LED Tunnel lamps
March, 2012
Client provided
Smart led and leds go technology
Levi Eshkol 57/3, Tel Aviv, Israel
www.smart-led.net