How to Use This Presentation
• To View the presentation as a slideshow with effects
select “View” on the menu bar and click on “Slide Show.”
• To advance through the presentation, click the right-arrow
key or the space bar.
• From the resources slide, click on any resource to see a
presentation for that resource.
• From the Chapter menu screen click on any lesson to go
directly to that lesson’s presentation.
• You may exit the slide show at any time by pressing
the Esc key.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Resources
Chapter Presentation
Transparencies
Visual Concepts
Sample Problems
Standardized Test Prep
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Forces and the Laws of Motion
Table of Contents
Section 1 Changes in Motion
Section 2 Newton's First Law
Section 3 Newton's Second and Third Laws
Section 4 Everyday Forces
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 1 Changes in Motion
Objectives
• Describe how force affects the motion of an object.
• Interpret and construct free body diagrams.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 1 Changes in Motion
Force
• A force is an action exerted on an object which may
change the object’s state of rest or motion.
• Forces can cause accelerations.
• The SI unit of force is the newton, N.
• Forces can act through contact or at a distance.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 1 Changes in Motion
Comparing Contact and Field Forces
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 1 Changes in Motion
Force Diagrams
• The effect of a force depends on both magnitude
and direction.Thus, force is a vector quantity.
• Diagrams that show force vectors as arrows are
called force diagrams.
• Force diagrams that show only the forces acting on a
single object are called free-body diagrams.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 1 Changes in Motion
Force Diagrams, continued
Force Diagram
Free-Body Diagram
In a force diagram, vector
arrows represent all the
forces acting in a
situation.
A free-body diagram shows
only the forces acting on
the object of interest—in
this case, the car.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 1 Changes in Motion
Drawing a Free-Body Diagram
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 1 Changes in Motion
Many orangutans spend their entire lives among
the trees and are well adapted to move in this
arboreal habitat. They have long arms (about twothirds of their body height) and powerful chest
muscles. Suppose an adult orangutan is hanging
by its arms from a tree branch. The angle
between each of the animal’s arms and the
vertical is 15° with each arm exerting a force 430
N. The gravitational force acting on it is 830 N.
Draw a free-body diagram of the animal.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 1 Changes in Motion
Solution
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 1 Changes in Motion
Rock wall climbing is a challenging activity.
Suppose that on one ascent, a climbing piton is
wedged into a crevice on the rock wall. A climber
negotiating the wall exerts a force of 350 N at an
angle of 65° below the horizontal on a rope
secured to the piton. The rock surrounding the
piton exerts an upward force of 320 N and a
horizontal force of 150 N to the left on the pin.
Draw a free-body diagram of the pin.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 1 Changes in Motion
Solution
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 1 Changes in Motion
An experienced pilot can keep an engineless
glider aircraft aloft for hours by using only the lift
provided by rising air currents. Suppose during a
flight an upward force of 5.00 × 103 N is exerted
on the glider. Simultaneously, the glider
experiences a forward force of 0.50 × 103 N. The
gravitational force acting on the glider and its pilot
is 4.80 × 103 N. Draw a free-body diagram of the
glider
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 1 Changes in Motion
Solution
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 2 Newton’s First Law
Objectives
• Explain the relationship between the motion of an
object and the net external force acting on the object.
• Determine the net external force on an object.
• Calculate the force required to bring an object into
equilibrium.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 2 Newton’s First Law
Newton’s First Law
• An object at rest remains at rest, and an object in
motion continues in motion with constant velocity
(that is, constant speed in a straight line) unless the
object experiences a net external force.
• In other words, when the net external force on an
object is zero, the object’s acceleration (or the
change in the object’s velocity) is zero.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 2 Newton’s First Law
Net Force
• Newton's first law refers to the net force on an
object.The net force is the vector sum of all forces
acting on an object.
• The net force on an object can be found by using the
methods for finding resultant vectors.
Although several forces are
acting on this car, the vector sum
of the forces is zero. Thus, the
net force is zero, and the car
moves at a constant velocity.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 2 Newton’s First Law
Sample Problem
Determining Net Force
Derek leaves his physics book on top of a drafting
table that is inclined at a 35° angle. The free-body
diagram below shows the forces acting on the book.
Find the net force acting on the book.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 2 Newton’s First Law
Sample Problem, continued
1. Define the problem, and identify the variables.
Given:
Fgravity-on-book = Fg = 22 N
Ffriction = Ff = 11 N
Ftable-on-book = Ft = 18 N
Unknown:
Fnet = ?
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 2 Newton’s First Law
Sample Problem, continued
2. Select a coordinate system, and apply it to the
free-body diagram.
Choose the x-axis parallel to and the y-axis perpendicular to
the incline of the table, as shown in (a). This coordinate
system is the most convenient because only one force needs
to be resolved into x and y components.
Tip: To simplify the problem, always
choose the coordinate system in
which as many forces as possible lie
on the x- and y-axes.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 2 Newton’s First Law
Sample Problem, continued
3. Find the x and y components of all vectors.
Draw a sketch, as shown in (b), to help find
the components of the vector Fg. The angle 
is equal to 180– 90 – 35 = 55.
cos  
Fg, x
Fg
sin  
Fg, y
Fg
Fg, x  Fg cos 
Fg, y  Fg sin 
Fg, x  (22 N)(cos 55)
Fg, x  (22 N)(sin 55)
Fg, x  13 N
Fg, x  18 N
Add both components to the free-body diagram, as shown in (c).
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 2 Newton’s First Law
Sample Problem, continued
4. Find the net force in both the x and y directions.
Diagram (d) shows another free-body
diagram of the book, now with forces
acting only along the x- and y-axes.
For the x direction:
SFx = Fg,x – Ff
SFx = 13 N – 11 N
SFx = 2 N
For the y direction:
SFy = Ft – Fg,y
SFy = 18 N – 18 N
SFy = 0 N
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 2 Newton’s First Law
Sample Problem, continued
5. Find the net force.
Add the net forces in the x and y directions together as
vectors to find the total net force. In this case, Fnet = 2 N in
the +x direction, as shown in (e). Thus, the book accelerates
down the incline.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 2 Newton’s First Law
Sample Problem
Determining Net Force
Two tugboats pull a barge across the harbor. One
boat exerts a force of 7.5 x 104 N north, while the
second boat exerts a force of 9.5 x 104 N at 15.0° north
of west. Precisely, in what direction does the barge
move?
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Section 2 Newton’s First Law
Chapter 4
Sample Problem
Determining Net Force
47° north of west
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 2 Newton’s First Law
Sample Problem
Determining Net Force
A four-way tug-of-war has four ropes attached to a
metal ring. The forces on the ring are as follows: F1 =
4.00 x 103 N east, F2 = 5.00 x 103 N north, F3 = 7.00 x
103 N west, and F4 = 9.00 x 103 N south. What is the
net force on the ring? What would be that force’s
precise direction?
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 2 Newton’s First Law
Sample Problem
Determining Net Force
5.00 × 103 N @ 53.1° south of west
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 2 Newton’s First Law
Inertia
• Inertia is the tendency of an object to resist being
moved or, if the object is moving, to resist a change
in speed or direction.
• Newton’s first law is often referred to as the law of
inertia because it states that in the absence of a net
force, a body will preserve its state of motion.
• Mass is a measure of inertia.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 2 Newton’s First Law
Inertia and the Operation of a Seat Belt
•
•
•
While inertia causes
passengers in a car to
continue moving forward as
the car slows down, inertia
also causes seat belts to lock
into place.
The illustration shows how
one type of shoulder harness
operates.
When the car suddenly slows
down, inertia causes the large
mass under the seat to
continue moving, which
activates the lock on the
safety belt.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 2 Newton’s First Law
Equilibrium
• Equilibrium is the state in which the net force on an
object is zero.
• Objects that are either at rest or moving with
constant velocity are said to be in equilibrium.
• Newton’s first law describes objects in equilibrium.
Tip: To determine whether a body is in equilibrium, find the net
force. If the net force is zero, the body is in equilibrium. If there
is a net force, a second force equal and opposite to this net
force will put the body in equilibrium.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 3 Newton’s Second and
Third Laws
Objectives
• Describe an object’s acceleration in terms of its
mass and the net force acting on it.
• Predict the direction and magnitude of the
acceleration caused by a known net force.
• Identify action-reaction pairs.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 3 Newton’s Second and
Third Laws
Newton’s Second Law
The acceleration of an object is directly
proportional to the net force acting on the
object and inversely proportional to the
object’s mass.
SF = ma
net force = mass  acceleration
SF represents the vector sum of all external forces
acting on the object, or the net force.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 3 Newton’s Second and
Third Laws
Newton’s Second Law
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 3 Newton’s Second and
Third Laws
Newton’s Third Law
• If two objects interact, the magnitude of the force
exerted on object 1 by object 2 is equal to the
magnitude of the force simultaneously exerted on
object 2 by object 1, and these two forces are
opposite in direction.
• In other words, for every action, there is an
equal and opposite reaction.
• Because the forces coexist, either force can be
called the action or the reaction.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 3 Newton’s Second and
Third Laws
Action and Reaction Forces
• Action-reaction pairs do not imply that the net
force on either object is zero.
• The action-reaction forces are equal and opposite,
but either object may still have a net force on it.
Consider driving a nail into wood with
a hammer. The force that the nail
exerts on the hammer is equal and
opposite to the force that the hammer
exerts on the nail. But there is a net
force acting on the nail, which drives
the nail into the wood.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 3 Newton’s Second and
Third Laws
Newton’s Third Law
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 4 Everyday Forces
Objectives
• Explain the difference between mass and weight.
• Find the direction and magnitude of normal forces.
• Describe air resistance as a form of friction.
• Use coefficients of friction to calculate frictional force.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 4 Everyday Forces
Weight
• The gravitational force (Fg) exerted on an object
by Earth is a vector quantity, directed toward the
center of Earth.
• The magnitude of this force (Fg) is a scalar
quantity called weight.
• Weight changes with the location of an object in
the universe.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 4 Everyday Forces
Weight, continued
• Calculating weight at any location:
Fg = mag
ag = free-fall acceleration at that location
• Calculating weight on Earth's surface:
ag = g = 9.81 m/s2
Fg = mg = m(9.81 m/s2)
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 4 Everyday Forces
Comparing Mass and Weight
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 4 Everyday Forces
Normal Force
• The normal force acts on a surface in a direction
perpendicular to the surface.
• The normal force is not always opposite in
direction to the force due to gravity.
– In the absence of other forces, the
normal force is equal and opposite
to the component of gravitational
force that is perpendicular to the
contact surface.
– In this example, Fn = mg cos .
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 4 Everyday Forces
Normal Force
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 4 Everyday Forces
Friction
• Static friction is a force that resists the initiation
of sliding motion between two surfaces that are in
contact and at rest.
• Kinetic friction is the force that opposes the
movement of two surfaces that are in contact and
are sliding over each other.
• Kinetic friction is always less than the maximum
static friction.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 4 Everyday Forces
Friction
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 4 Everyday Forces
Friction Forces in Free-Body Diagrams
• In free-body diagrams, the force of friction is always
parallel to the surface of contact.
• The force of kinetic friction is always opposite the
direction of motion.
• To determine the direction of the force of static
friction, use the principle of equilibrium. For an
object in equilibrium, the frictional force must point
in the direction that results in a net force of zero.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 4 Everyday Forces
The Coefficient of Friction
• The quantity that expresses the dependence of
frictional forces on the particular surfaces in
contact is called the coefficient of friction, m.
• Coefficient of kinetic friction:
Fk
mk 
Fn
• Coefficient of static friction:
Fs,max
ms 
Fn
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 4 Everyday Forces
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 4 Everyday Forces
Sample Problem
Overcoming Friction
A student attaches a rope to a 20.0 kg box of
books.He pulls with a force of 90.0 N at an angle of
30.0° with the horizontal. The coefficient of kinetic
friction between the box and the sidewalk is 0.500.
Find the acceleration of the box.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 4 Everyday Forces
Sample Problem, continued
1. Define
Given:
m = 20.0 kg
mk = 0.500
Fapplied = 90.0 N at  = 30.0°
Unknown:
a= ?
Diagram:
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 4 Everyday Forces
Sample Problem, continued
2. Plan
Choose a convenient coordinate system, and
find the x and y components of all forces.
The diagram on the right shows the
most convenient coordinate system,
because the only force to resolve
into components is Fapplied.
Fapplied,y = (90.0 N)(sin 30.0º) = 45.0 N (upward)
Fapplied,x = (90.0 N)(cos 30.0º) = 77.9 N (to the right)
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 4 Everyday Forces
Sample Problem, continued
Choose an equation or situation:
A. Find the normal force, Fn, by applying the condition of
equilibrium in the vertical direction:
SFy = 0
B. Calculate the force of kinetic friction on the box:
Fk = mkFn
C. Apply Newton’s second law along the horizontal direction to
find the acceleration of the box:
SFx = max
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 4 Everyday Forces
Sample Problem, continued
3. Calculate
A. To apply the condition of equilibrium in the vertical direction,
you need to account for all of the forces in the y direction:
Fg, Fn, and Fapplied,y. You know Fapplied,y and can use the box’s
mass to find Fg.
Fapplied,y = 45.0 N
Fg = (20.0 kg)(9.81 m/s2) = 196 N
Next, apply the equilibrium condition,
SFy = 0, and solve for Fn.
SFy = Fn + Fapplied,y – Fg = 0
Fn + 45.0 N – 196 N = 0
Fn = –45.0 N + 196 N = 151 N
Chapter menu
Tip: Remember to
pay attention to the
direction of forces.
In this step, Fg is
subtracted from Fn
and Fapplied,y
because Fg is
directed downward.
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 4 Everyday Forces
Sample Problem, continued
B. Use the normal force to find the force of kinetic friction.
Fk = mkFn = (0.500)(151 N) = 75.5 N
C. Use Newton’s second law to determine the horizontal
acceleration.
SFx  Fapplied  Fk  max
ax 
Fapplied, x  Fk
m
77.9 N  75.5 N
2.4 N
2.4 kg  m/s2



20.0 kg
20.0 kg
20.0 kg
a = 0.12 m/s2 to the right
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 4 Everyday Forces
Sample Problem, continued
4. Evaluate
The box accelerates in the direction of the net
force, in accordance with Newton’s second law.
The normal force is not equal in magnitude to the
weight because the y component of the student’s
pull on the rope helps support the box.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 4 Everyday Forces
Air Resistance
• Air resistance is a form of friction. Whenever an
object moves through a fluid medium, such as air or
water, the fluid provides a resistance to the object’s
motion.
• For a falling object, when the upward force of air
resistance balances the downward gravitational
force, the net force on the object is zero. The object
continues to move downward with a constant
maximum speed, called the terminal speed.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 4 Everyday Forces
Fundamental Forces
• There are four fundamental forces:
– Electromagnetic force
– Gravitational force
– Strong nuclear force
– Weak nuclear force
• The four fundamental forces are all field forces.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Multiple Choice
Use the passage below to answer questions 1–2.
Two blocks of masses m1 and m2 are placed in contact with each
other on a smooth, horizontal surface. Block m1 is on the left of
block m2. A constant horizontal force F to the right is applied to
m1.
1. What is the acceleration of the two blocks?
A.
a
F
m1
C. a 
F
m1  m2
B.
F
a
m2
D. a 
F
(m1 )(m2 )
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Multiple Choice
Use the passage below to answer questions 1–2.
Two blocks of masses m1 and m2 are placed in contact with each
other on a smooth, horizontal surface. Block m1 is on the left of
block m2. A constant horizontal force F to the right is applied to
m1.
1. What is the acceleration of the two blocks?
A.
a
F
m1
C. a 
F
m1  m2
B.
F
a
m2
D. a 
F
(m1 )(m2 )
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Multiple Choice, continued
Use the passage below to answer questions 1–2.
Two blocks of masses m1 and m2 are placed in contact with each
other on a smooth, horizontal surface. Block m1 is on the left of
block m2. A constant horizontal force F to the right is applied to
m1.
2. What is the horizontal force acting on m2?
F. m1a
G. m2a
H. (m1 + m2)a
J. m1m2a
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Multiple Choice, continued
Use the passage below to answer questions 1–2.
Two blocks of masses m1 and m2 are placed in contact with each
other on a smooth, horizontal surface. Block m1 is on the left of
block m2. A constant horizontal force F to the right is applied to
m1.
2. What is the horizontal force acting on m2?
F. m1a
G. m2a
H. (m1 + m2)a
J. m1m2a
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Multiple Choice, continued
3. A crate is pulled to the right with a force of 82.0 N, to the left
with a force of 115 N, upward with a force of 565 N, and
downward with a force of 236 N. Find the magnitude and
direction of the net force on the crate.
A. 3.30 N at 96° counterclockwise from the positive x-axis
B. 3.30 N at 6° counterclockwise from the positive x-axis
C. 3.30 x 102 at 96° counterclockwise from the positive x-axis
D. 3.30 x 102 at 6° counterclockwise from the positive x-axis
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Multiple Choice, continued
3. A crate is pulled to the right with a force of 82.0 N, to the left
with a force of 115 N, upward with a force of 565 N, and
downward with a force of 236 N. Find the magnitude and
direction of the net force on the crate.
A. 3.30 N at 96° counterclockwise from the positive x-axis
B. 3.30 N at 6° counterclockwise from the positive x-axis
C. 3.30 x 102 at 96° counterclockwise from the positive x-axis
D. 3.30 x 102 at 6° counterclockwise from the positive x-axis
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Multiple Choice, continued
4. A ball with a mass of m is thrown into the air, as shown in the
figure below. What is the force exerted on Earth by the ball?
A. mballg directed down
B. mballg directed up
C. mearthg directed down
D. mearthg directed up
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Multiple Choice, continued
4. A ball with a mass of m is thrown into the air, as shown in the
figure below. What is the force exerted on Earth by the ball?
A. mballg directed down
B. mballg directed up
C. mearthg directed down
D. mearthg directed up
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Multiple Choice, continued
5. A freight train has a mass of 1.5 x 107 kg. If the locomotive
can exert a constant pull of 7.5 x 105 N, how long would it take
to increase the speed of the train from rest to 85 km/h?
(Disregard friction.)
A. 4.7 x 102s
B. 4.7s
C. 5.0 x 10-2s
D. 5.0 x 104s
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Multiple Choice, continued
5. A freight train has a mass of 1.5 x 107 kg. If the locomotive
can exert a constant pull of 7.5 x 105 N, how long would it take
to increase the speed of the train from rest to 85 km/h?
(Disregard friction.)
A. 4.7 x 102s
B. 4.7s
C. 5.0 x 10-2s
D. 5.0 x 104s
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Multiple Choice, continued
Use the passage below to answer questions 6–7.
A truck driver slams on the brakes and skids
to a stop through a displacement Dx.
6. If the truck’s mass doubles, find the truck’s skidding distance in
terms of Dx. (Hint: Increasing the mass increases the normal
force.)
A. Dx/4
B. Dx
C. 2Dx
D. 4Dx
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Multiple Choice, continued
Use the passage below to answer questions 6–7.
A truck driver slams on the brakes and skids
to a stop through a displacement Dx.
6. If the truck’s mass doubles, find the truck’s skidding distance in
terms of Dx. (Hint: Increasing the mass increases the normal
force.)
A. Dx/4
B. Dx
C. 2Dx
D. 4Dx
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Multiple Choice, continued
Use the passage below to answer questions 6–7.
A truck driver slams on the brakes and skids
to a stop through a displacement Dx.
7. If the truck’s initial velocity were halved, what would be the
truck’s skidding distance?
A. Dx/4
B. Dx
C. 2Dx
D. 4Dx
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Multiple Choice, continued
Use the passage below to answer questions 6–7.
A truck driver slams on the brakes and skids
to a stop through a displacement Dx.
7. If the truck’s initial velocity were halved, what would be the
truck’s skidding distance?
A. Dx/4
B. Dx
C. 2Dx
D. 4Dx
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Multiple Choice, continued
Use the graph at right to
answer questions 8–9. The
graph shows the relationship
between the applied force
and the force of friction.
8. What is the relationship between the forces at point A?
F. Fs=Fapplied
G. Fk=Fapplied
H. Fs<Fapplied
I. Fk>Fapplied
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Multiple Choice, continued
Use the graph at right to
answer questions 8–9. The
graph shows the relationship
between the applied force
and the force of friction.
8. What is the relationship between the forces at point A?
F. Fs=Fapplied
G. Fk=Fapplied
H. Fs<Fapplied
I. Fk>Fapplied
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Multiple Choice, continued
Use the graph at right to
answer questions 8–9. The
graph shows the relationship
between the applied force
and the force of friction.
9. What is the relationship between the forces at point B?
A. Fs, max=Fk
B. Fk> Fs, max
C. Fk>Fapplied
D. Fk<Fapplied
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Multiple Choice, continued
Use the graph at right to
answer questions 8–9. The
graph shows the relationship
between the applied force
and the force of friction.
9. What is the relationship between the forces at point B?
A. Fs, max=Fk
B. Fk> Fs, max
C. Fk>Fapplied
D. Fk<Fapplied
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Short Response
Base your answers to questions 10–12 on the
information below.
A 3.00 kg ball is dropped from rest from the
roof of a building 176.4 m high.While the ball
is falling, a horizontal wind exerts a constant
force of 12.0 N on the ball.
10. How long does the ball take to hit the ground?
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Short Response
Base your answers to questions 10–12 on the
information below.
A 3.00 kg ball is dropped from rest from the
roof of a building 176.4 m high.While the ball
is falling, a horizontal wind exerts a constant
force of 12.0 N on the ball.
10. How long does the ball take to hit the ground?
Answer: 6.00 s
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Short Response, continued
Base your answers to questions 10–12 on the
information below.
A 3.00 kg ball is dropped from rest from the
roof of a building 176.4 m high.While the ball
is falling, a horizontal wind exerts a constant
force of 12.0 N on the ball.
11. How far from the building does the ball hit the ground?
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Short Response, continued
Base your answers to questions 10–12 on the
information below.
A 3.00 kg ball is dropped from rest from the
roof of a building 176.4 m high.While the ball
is falling, a horizontal wind exerts a constant
force of 12.0 N on the ball.
11. How far from the building does the ball hit the ground?
Answer: 72.0 m
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Short Response, continued
Base your answers to questions 10–12 on the
information below.
A 3.00 kg ball is dropped from rest from the
roof of a building 176.4 m high.While the ball
is falling, a horizontal wind exerts a constant
force of 12.0 N on the ball.
12. When the ball hits the ground, what is its speed?
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Short Response, continued
Base your answers to questions 10–12 on the
information below.
A 3.00 kg ball is dropped from rest from the
roof of a building 176.4 m high.While the ball
is falling, a horizontal wind exerts a constant
force of 12.0 N on the ball.
12. When the ball hits the ground, what is its speed?
Answer: 63.6 m/s
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Short Response, continued
Base your answers to questions 13–15 on the
passage.
A crate rests on the horizontal bed of a pickup truck.
For each situation described below, indicate the
motion of the crate relative to the ground, the motion of
the crate relative to the truck, and whether the crate
will hit the front wall of the truck bed, the back wall, or
neither. Disregard friction.
13. Starting at rest, the truck accelerates to the right.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Short Response, continued
Base your answers to questions 13–15 on the
passage.
A crate rests on the horizontal bed of a pickup truck.
For each situation described below, indicate the
motion of the crate relative to the ground, the motion of
the crate relative to the truck, and whether the crate
will hit the front wall of the truck bed, the back wall, or
neither. Disregard friction.
13. Starting at rest, the truck accelerates to the right.
Answer: at rest, moves to the left, hits back wall
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Short Response, continued
Base your answers to questions 13–15 on the
passage.
A crate rests on the horizontal bed of a pickup truck.
For each situation described below, indicate the
motion of the crate relative to the ground, the motion of
the crate relative to the truck, and whether the crate
will hit the front wall of the truck bed, the back wall, or
neither. Disregard friction.
14. The crate is at rest relative to the truck while the
truck moves with a constant velocity to the right.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Short Response, continued
Base your answers to questions 13–15 on the
passage.
A crate rests on the horizontal bed of a pickup truck.
For each situation described below, indicate the
motion of the crate relative to the ground, the motion of
the crate relative to the truck, and whether the crate
will hit the front wall of the truck bed, the back wall, or
neither. Disregard friction.
14. The crate is at rest relative to the truck while the
truck moves with a constant velocity to the right.
Answer: moves to the right, at rest, neither
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Short Response, continued
Base your answers to questions 13–15 on the
passage.
A crate rests on the horizontal bed of a pickup truck.
For each situation described below, indicate the
motion of the crate relative to the ground, the motion of
the crate relative to the truck, and whether the crate
will hit the front wall of the truck bed, the back wall, or
neither. Disregard friction.
15. The truck in item 14 slows down.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Short Response, continued
Base your answers to questions 13–15 on the
passage.
A crate rests on the horizontal bed of a pickup truck.
For each situation described below, indicate the
motion of the crate relative to the ground, the motion of
the crate relative to the truck, and whether the crate
will hit the front wall of the truck bed, the back wall, or
neither. Disregard friction.
15. The truck in item 14 slows down.
Answer: moves to the right, moves to the right,
hits front wall
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Extended Response
16. A student pulls a rope attached to a 10.0 kg wooden
sled and moves the sled across dry snow. The student
pulls with a force of 15.0 N at an angle of 45.0º.
If mk between the sled and the snow is 0.040, what
is the sled’s acceleration? Show your work.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Extended Response
16. A student pulls a rope attached to a 10.0 kg wooden
sled and moves the sled across dry snow. The student
pulls with a force of 15.0 N at an angle of 45.0º.
If mk between the sled and the snow is 0.040, what
is the sled’s acceleration? Show your work.
Answer: 0.71 m/s2
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Extended Response, continued
17. You can keep a 3 kg book from dropping by pushing
it horizontally against a wall. Draw force diagrams,
and identify all the forces involved. How do they
combine to result in a zero net force? Will the force
you must supply to hold the book up be different for
different types of walls? Design a series of
experiments to test your answer. Identify exactly
which measurements will be necessary and what
equipment you will need.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Standardized Test Prep
Extended Response, continued
17. You can keep a 3 kg book from dropping by pushing
it horizontally against a wall. Draw force diagrams,
and identify all the forces involved. How do they
combine to result in a zero net force? Will the force
you must supply to hold the book up be different for
different types of walls? Design a series of
experiments to test your answer. Identify exactly
which measurements will be necessary and what
equipment you will need.
Answer: Plans should involve measuring forces such
as weight, applied force, normal force, and friction.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 1 Changes in Motion
Force Diagrams
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 4
Section 2 Newton’s First Law
Inertia and the Operation of a Seat Belt
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.