For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
Total Training Centre is situated within easy reach of both the A38 and A52 and is on central bus
route to and from Derby City Centre. It also has its own off road parking facilities.
The centre can be hired daily separately and refreshments and Lunch can be provided, POA.
Plasma TV
& Projector
First Floor:
Training
Room:
Flip Charts,
Stationery
Accommodates
up to 20
Delegates.
This room also accommodates up to 20 delegates.
Ground
Floor:
Dining/
Meeting/
Open Plan
Training
Optional
Free WIFI
Available
For information please contact:
Break Out
Room
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
If required.
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
There are a wide range of courses available, the most popular are enclosed within this
portfolio but if you require any courses not shown please enquire as we can accommodate
these.
We are now IPAF members and are in the process of becoming an IPAF accredited training
centre. This will enable us to run open courses from this location. We also have trainers
that can deliver courses at your premises if required, for plant courses Total Hire and Sales
will supply machinery at no extra charge, unless this is not required!
Please Note: As some courses attached for e.g. CPCS, SMSTS, SSSTS, require registration and
specific literature, certificates etc., these need to be booked in advance at least 4 weeks
where possible and confirmation is needed.
All courses have the option to purchase refreshments and buffet lunch if required.
There are cancellation charges if within 2 weeks of the course and a no show charge levied.
Overview of Courses:
Half Day Courses:
Abrasive Wheel
Asbestos Awareness
Banksman Traffic Controller/Vehicle Movement
Cat and Genny
PASMA Working at Heights
Stair Lift
IPAF – Safety Harness
One Day Courses:
Emergency First Aid
H & S Awareness
Temp Works Co-ordination
IPAF –MEWPS
PASMA Tower Scaffolding
Other Courses:
SMSTS Initial 5 day / Refresher 2 day
SSSTS 2 day
PMSTS 5 Day
First Aid at Work 3 day
Basic and Tower Scaffold
Confined Space – Medium Risk
Street Works, Chapter 8 + Re Assessment
Plant New User and Refresher courses offered with In House, NPORS or CPCS Certs.
Plant: Dumper, Forward Tipping Dumper, Ride on Roller, Telehandler, Excavator.
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
Contents
Abrasive Wheel Course
Asbestos Awareness
Banksman (Traffic Control) Course
Banksman Vehicle Movements Course
Basic Scaffolding Course
Cable Avoidance Tool (CAT) Course
Chapter 8 – Signing, Lighting and Guarding – NRSWA
Construction Design and Management Regulations Course
Confined Spaces – Initial Course - Medium Risk
Confined Spaces – Refresher Course -Medium Risk
Emergency First Aid Course
First Aid at Work Course
First Aid Refresher Course
Health and Safety Awareness
IPAF: Overview of categories
Demonstrator
MEWPS for Managers/Operators
Safety Harness
PAV
Safe Loading/Unloading
IOSH Managing Safely
Lifting Appointed Person BS 7121
Manual Handling
PASMA - Tower Scaffold Course
PASMA - Working at Heights
Pipework and Brazing
Plant Management Safety Training Scheme (PMSTS)
Plant Refresher
Portable Appliance Testing
Safe Working at Height
Site Management Safety Training Course
SMSTS 2 Day Refresher Course
SSSTS 2 Day Course
Stair Lift
Street Works Re-assessment -NRSWA
Temporary Works Co-ordination
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
Abrasive Wheel Course
Venue:
In-House – Total training Centre
Duration:
Half Day – In House/Full Day (National Plant Cert)
Minimum Delegates:
4
Maximum Delegates:
6
Objectives:
To enable delegates to mount abrasive wheels on portable
machines.
Content:
On completion of training the delegate will Know the relevant health and safety legislation
Know their own personal health and safety responsibilities
Be able to mount an abrasive wheel on a portable machine
Understand and be aware of the different types of
abrasive wheel and their capabilities
Be able to inspect and store abrasive wheels and portable
machines
Course Includes:
Refreshments/Lunch*(full day)
Course Notes
Certificates
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
Asbestos Awareness
Venue:
In-House – On Site/ Open Course Nationally
Duration:
Half Day
Maximum Delegates:
15
Objectives:
This course complies with HSE requirements, this form of training is suitable for ALL
employees whose work may expose them to asbestos (Regulation 10 - Control of Asbestos
at Work Regulations 2006).
Content:
Introduction to asbestos - nature and origin.
Types of asbestos.
Properties and benefits (use of asbestos).
Health hazards.
Possible locations of asbestos in buildings.
Current legislation and guidance.
Legal limitations on work liable to disturb asbestos.
Working safely/duty holders responsibilities.
Safe working in areas where asbestos is present.
Safe and correct use of RPE/PPE (personal protective equipment).
Decontamination.
Emergency procedures/accidental damage/general
procedures.
Self assessment Test
Course Includes:
Nationally Recognised Certification lasting 2 years
Refreshments
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
Banksman (Traffic Control) Course
Venue:
In-House – Total Training Centre
Duration:
Half Day
Minimum Delegates:
1
Maximum Delegates:
6
Objectives:
Most accidents occur as a result of poor observation and an
inability of the driver to judge the length of the vehicle and
pivotal point of the rear axles. Reversing requires the
application of basic mechanical principles and all round
observation on the driver’s part.
This aim of this course is to provide delegates with the
necessary skills to control vehicles on-site or other places of
work.
Content:
Statutory requirements (INDG 148) & The Workplace
(Health Safety & Welfare Regs.’92
Writing and implementing a traffic control assessment
The role of the Banksman, security staff and visiting drivers
Legal consequences
Importance of mirror use
Importance of assisted reversing
Reversing 90˚ left
Reversing 90˚ right
Reversing around obstacles
Reversing up to loading bays
RIDDOR requirements
Legal consequences
Course Includes:
Certificates and course literature
Refreshments
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
Banksman Vehicle Movements Course
Venue:
In-House – Total Training Centre
Duration:
Half Day
Minimum Delegates:
4
Maximum Delegates:
6
Objectives:
To enable delegates to have an awareness of the Hazards plant
and vehicle movement create on site and implement control
measures to avoid accidental collision.
Content:
On completion of the training the delegate will:
Know the relevant health and safety legislation
Know the banksman’s role and responsibilities
Recognise hazards and controls for vehicle movement
Recognise and use the required hand signals
Apply risk controls for route movement
Course Includes:
Certificates and Course Material
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
Basic Scaffolding Course
Venue:
(Nottingham)
Duration:
2 Day
Minimum Delegates:
1
Maximum Delegates:
14
Objectives:
To develop delegates in an understanding of scaffold
components, forms of construction and inspection procedures
of basic tube and fitting access scaffolds in accordance with
statutory regulations and codes of practice.
Content:
Regulations, Codes of Practice and Industry Guidance
(NASC)
Scaffolding materials (tubes, fittings, boards etc.) and
terminology
Safe access and egress (ladders, staircases etc.)
Scaffold ties and bracing
Basic independent tied scaffolds
Putlog, birdcage and tower scaffolds
Scaffolds with prefabricated beams
Pavement gantry and protective fans
Loading bays
Roof edge protection
Splay scaffolds
Roof saddles and chimney access
Multi choice examination
Practical scaffold inspection examination
Certification:
CISRS Certificate of training upon completion of course and
successful completion of both examinations – CISRS –
Construction Industry Scaffolders Registration Scheme –
Successful delegates who have also passed Supervisors at
Work at Height CSCS health and safety test can apply for a
CISRS Basic Scaffold Inspection Card.
Course Includes:
Certificates
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
Cable Avoidance Tool (CAT) Course
Venue:
In-House – Total Training Centre
Duration:
Half Day
Minimum Delegates:
4
Maximum Delegates:
8
Objectives:
Any persons working on roads, people who are setting out
before a build, surveyors and any person excavating areas
should be trained in the correct use of cable locators.
Content:
Introduction HSG47 Hand-out Avoiding Danger from
Underground Services
Introduction to Cable Avoidance Tool (CAT)
Controls and functions, system checks, replacement
of batteries and battery checks
Use and limitations of power, radio and
induction/connection using Genny
Practical demonstration and practice in the use of
the CAT and Genny to locate underground services.
By the end of this course delegate will:
Understand the reasons for using locators
Know simple ways to locate street lighting cables
Know the location of bends, junctions and service
connections
Know how to identify utilities
Know how to locate through concrete reinforcing
Course Includes:
Hand-outs, Certificates
Refreshments
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
Chapter 8 – NRSWA – Signing, Lighting and Guarding
Venue:
CSS – Ascot Drive
Duration:
1 Day
Minimum Delegates:
6
Who should attend the course:
Any person who is engaged in any form of works on the highway
Aims:
Provide candidates with the knowledge and understanding of the legal requirements to
enable them to follow the procedures for setting out Signing and Guarding of excavation (or
other works) on the Highway.
Course Objectives:
Identify various types of signing and guarding
Recognise the safety procedures required
Assess the legal requirements
Course Content:
New Roads and Street works Act 1991 – Chapter 8
Review the codes of practice
Drawing site plans
Notices required by local authorities
Site surveys
Code of Practice – Safety at Street works and
Road works
An introduction to the use of vehicle actuated portable
traffic signals
Practical exercise – erecting signing, lighting and
guarding
Course Includes:
City and Guilds Certification **
Buffet Lunch and refreshments
**For a fee of £22.50 per delegate, this unit can also be registered as a qualification with the
Street works Qualification register if required.
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
Cat and Genny Course
Venue:
In-House – Total Training Centre
Duration:
Half Day
Minimum Delegates:
4
Maximum Delegates:
6
Objectives:
This course will cover the basic operation and methods
involved in locating underground services, the problems and
hazards to be aware of and how to determine the readings
given.
Content:
This course will provide each delegate with the knowledge
needed to safely and correctly operate a Basic Cable
Avoidance Tool (CAT) along with a Signal Generator
(GENNY) when tracing underground services.
The requirements of the Regulations with respect to
Detecting and Tracing Underground Services.
Reasons for using locators
Hazards arising from the use of Cable Avoidance Tools and
Signal Generators and precautions which should be
observed.
Identification of types of Cable Avoidance Tools and Signal
Generators
Implications of damage, handling and transporting of
Equipment
Inspecting, calibration and testing of equipment
The methods of safe use of pipe and cable location
equipment, along with basic locating techniques
Safe working practices
Upon successfully passing the written assessment at the end of
the course, each delegate will be given a certificate of
instruction and attendance of training code of practice.
Course Includes:
Certificates, Literature
Refreshments
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
Construction Design and Management Regulations Course
Venue:
In House – Total Training Centre
Duration:
1 Day
Minimum Delegates:
6
Maximum Delegates:
12
Objectives:
On successful completion of the course delegates
will be able to:
State when CDM applies to a project
Outline the roles of key post holders under CDM
Define the contents of the Health and Safety File
Provide the right preconstruction information
Outline the content of a Construction Phase Plan
List requirements for consultation, communication,
coordination and competence
Content:
This one day course examines the legal requirements of the
recently amended CDM legislation and provides an outline of
key roles, responsibilities and management requirements.
Introduction & Background Legislation
CDM Application
General Management Duties
Duty Holders responsibilities and functions
CDM Documentation
Health & Safety on Site
Course Includes:
IOSH accredited Certificate (60% pass mark required)
Buffet Lunch
Refreshments
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
Confined Spaces – Initial Course
Medium Risk
Venue:
Mansfield/Rawdon
Duration:
2 Day
Minimum Delegates:
1
Objectives:
Prepare to work safely in medium risk confined spaces
Enter and exit confined spaces safely
Prepare and use escape breathing apparatus in
accordance with manufacturers’ specifications
Use equipment and tools safely and in accordance with
manufacturers’ specifications
Follow procedures and work safely
Deal with emergencies
At the end of this course students should be able to:
List work environments that may be classed as being a
confined space
Describe common hazards associated with working in medium
risk confined spaces
Identify relevant equipment that may be utilised when
working in a medium risk confined space
Demonstrate relevant checks on relevant equipment used for
working in medium risk confined spaces
Demonstrate correct procedures for entry/exit of medium risk
confined spaces
Demonstrate correct procedure to be adopted should an
emergency situation arise within the confined space.
Course Includes:
Nationally recognised certificate from City & Guilds and
CABWI.
Buffet Lunch and refreshments
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
Confined Spaces – Refresher Course
Medium Risk
Venue:
Derby/Mansfield/Rawdon
Duration:
1 Day
Minimum Delegates:
1
Objectives:
To refresh the knowledge and skills of those persons who have attended the Medium Risk
Confined Spaces Initial course and who require re-certification
To ensure confined space workers have up-to-date knowledge and skills to enable them to:
Prepare to work safely in medium risk confined spaces
Enter and exit confined spaces safely
Prepare and use escape breathing apparatus in accordance with
manufacturers’ specifications
Use equipment and tools safely and in accordance with
manufacturers’ specifications
Follow procedures and work safely
Deal with emergencies
Course Includes:
Nationally recognised certificate from City & Guilds and CABWI.
Buffet Lunch and refreshments
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
Emergency First Aid Course
Venue:
In-House – Total Training Centre
Duration:
1 Day
Minimum Delegates:
4
Maximum Delegates:
12
Who should Attend:
Nominated Emergency First Aiders, or anyone wanting a
comprehensive one day First Aid.
Objectives:
Basic Life-Saving First Aid and workplace Health and
Safety regulations.
Content:
Health and safety (first aid) regulations
Managing an incident
The priorities of first aid
Treatment of an unconscious casualty
Resuscitation
Shock
Choking
Seizures
Bleeding
Common workplace injuries.
Course Includes:
Buffet Lunch and refreshments
Certificates
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
First Aid at Work Course
Venue:
In-House – Total Training Centre
Duration:
3 Day (18 hours)
Minimum Delegates:
4
Maximum Delegates:
12
Objectives:
A Health and Safety Executive Approved course designed to give
candidates effective skills in both the practical tasks and theoretical
knowledge of first aid. On completion candidates would be able to
deal competently with injuries and/or illnesses and maintain the
care and comfort of the casualty in the initial stages until
professional help arrives.
Content:
Principles of First Aid
Initial assessment of incident
Unconsciousness / Levels of Response
Recovery Positions
Resuscitation
Choking
Basic Hygiene
Burns & Scalds
Shock / Fainting
Treatment of Bleeding
Eye Injuries
Injury / Illness Assessment
Fractures / Dislocations
Soft tissue injuries
Heart Attacks / Angina
Strokes
Seizures
Diabetes
Anaphylactic shock
Asthma
Poisons, gasses & fumes
First Aid Kits / Supplies
Record Keeping
Course Includes:
Certificates, course literature
Buffet Lunch and refreshments
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
First Aid Refresher Course
Venue:
In-House – Total Training Centre
Duration:
2 Day
Minimum Delegates:
6
Maximum Delegates:
12
Objectives:
This course is for those personnel who already hold a First Aid
at Work certificate (issued in the last 3 years) and who require
re-qualification to keep their certification valid.
Content:
Principles & priorities of first aid
Casualty assessment
Practical resuscitation
Treatment of unconscious casualty
Wounds, bleeding and shock
Heart attacks
Burns and scalds
Fracture management
Accident reporting
First aid kits
Written & practical assessment
Course Includes:
Buffet Lunch and refreshments
Certificates and First Aid Pack
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
Health and Safety Awareness
Venue:
In-House – Total Training Centre
Duration:
1 Day
Minimum Delegates:
4
Maximum Delegates:
8
Objectives:
To give construction operatives an awareness of health and
safety and how it affects their daily role, typical construction
hazards and how they are controlled.
Content:
On completion of this course the delegates will:
Understand the legal responsibilities
Be able to identify common hazards and propose common
sense risk controls
Be aware of the accident reporting system within the
company
Be aware of manual handling hazards
Recognise work at height hazards and implement control
measures
Recognise work equipment hazards and use equipment
safely
Understand fire precautions to be observed on site
Course Includes:
Certificates
Buffet Lunch and refreshments
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
IPAF Overview
Courses Available:
Mobile Elevating Work Platform (MEWP) courses for:
Operators
Demonstrators
Instructors
Categories of MEWP equipment:
Static Vertical (1a)
Static Boom (1b)
Mobile Vertical (3a)
Mobile Boom (3b)
Push Around Vehicle (PAV)
Insulated Ariel Device ( IAD)
Specialist Machines (SPECIAL)
Mast Climbing Work Platform (MCWP) courses for:
Mobile Operators
Demonstrators
Installers
Advanced Installers
Instructors
Other Courses:
Harness Use and Inspection (H)
Loading/Unloading (LOAD)
MEWPs for Managers (MM)
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
IPAF Demonstrator Training
Venue:
In-House or Derby - Nottingham
(depending on no. of delegates)
Duration:
1-3 Days
(Depending on the number of categories required! )
(1a, 1b, 3a and 3b)
Maximum Delegates:
4
Course Criteria:
- Applicants must be 16 and over
- Should hold a valid IPAF PAL card, proving they have
successfully undertaken an IPAF Operator Course.
Objectives:
This course includes a test paper on legal requirements and
provides delegates with the skills to familiarise operators with
their responsibilities and demonstrate safe operating
procedures.
Content:
Awareness of different types of Mobile
Elevating Work Platform (MEWP)
Safe Operation of MEWPs and limitations of use
Pre-Use checks, inspection and function tests
Defect reporting and handover procedure
Basic operational practice
Log book issue
Course Review and Close
Course Includes:
IPAF Demonstrator Card 5 year certification
(please note this course does not provide an IPAF PAL card).
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
IPAF MEWP For Managers Course
Venue:
In-House or Derby - Nottingham
(depending on no. of delegates)
Duration:
1 Day
Maximum Delegates:
4
Objectives:
This course is designed to instruct Supervisors and Managers
how to prepare for, and safely co-ordinate various types of
Mobile Elevating Work Platforms (MEWPs) within their
control.
Content:
Introduction including pre-course theory test, IPAF and
PAL card overview.
Understanding the different machine classifications i.e.
1a, 1b, 3a, 3b, MC, TPI and IAD.
Awareness of different types of Mobile Elevating Work
Platform (MEWP).
Examine the history of MEWPs and the suitability of
machine for tasks.
Understanding requirements for pre-use checks and daily
maintenance prior to work commencing.
Understanding the delivery of machines and
familiarisation process on site.
Individual written test, with explanation of pass
requirements.
Course Includes:
Scissor Lift and Booms
IPAF Certificate valid for 5 years
(this course does not include PAL card)
Lunch and Refreshments
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
IPAF MEWPs Safety Harness Training
Venue:
In-House
Duration:
Minimum 4 Hours – Half Day
Maximum Delegates:
10
Objectives:
Identification of appropriate protection equipment and use,
correct condition and fitting of harness are examined within
the course which covers a range of MEWPs. However, it can be
tailored to offer candidates achievement testing on specific
machines – please remember to highlight requirements when
booking.
Content:
Introduction: overview of course legislation
Definition of work at heights categories
Suitable harnesses for MEWPs
Correct fitting and adjustment of a full body harness
Selection of lanyard
Inertia devices: functions, operation and requirements
Suitable anchorage points
CE certification, conformity and record keeping
Harness inspection
Achievement testing
Course review and close
Course Includes:
On successful completion those who hold an IPAF PAL card will
have it endorsed with this qualification, those that don’t will
receive an IPAF Certificate.
Incurs a £28.00 Registration fee per delegate
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
IPAF Operating Training
Venue:
In-House – Derby - Nottingham
(depending on no. of delegates)
Duration:
1-3 Days (Depending on the number of categories required!)
(categories include - 1a, 1b, 3a and 3b)
Maximum Delegates:
4
Objectives:
A mix of theory and practical training, this course is designed
to enable operators to manoeuvre, drive and position the
machine safely and proficiently. It can be undertaken on
scissor lifts, booms or trailer mounted platforms. Awareness of
relevant Health and Safety regulations and accident prevention
and control. Be aware of needs regarding PPE.
Content:
Awareness of different types of MEWP
(Mobile Elevating Work Platform)
Safe Operation of MEWPs and limitations of use
Pre-use checks, inspection and function tests
Planning the route before operating the MEWP
Travelling the route and manoeuvring the MEWP
Setting up the MEWP for work
Basic Operational Practice
Achieving Testing
Selection of use of fall arrest equipment
Log Book Issue
Course Review and Close
Course Includes:
PAL ( Powered Access Licence) Photo ID Card
5 years accreditation.
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
IPAF Push Around Vertical (PAV) Training
Venue:
In-House if 4 or Derby-Nottingham
Duration:
1 Day
Maximum Delegates:
4
Objectives:
A Mix of theory and practical training, this course is designed
to enable operators to manoeuvre and position the machine
safely and proficiency. It can be undertaken on Push Around
Verticals.
Content:
Safe operation of PAV and limitations of use
Pre-use checks, inspection and function tests
Emergency lowering
Planning and route before operating the PAV
Introduction of the PAV
Major components identification and its function
Starting/stopping the PAV, correct starting and shut down
procedures
Travelling the route and manoeuvring the PAV
Setting up the PAV for work
Basic operational practice
Achieving testing
Use of log book, course evaluation and close.
Course Includes:
IPAF Accreditation
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
IPAF Safe Loading and Unloading
Venue:
In-House if 4 or Derby - Nottingham
Duration:
1 Day
Maximum Delegates:
4
Objectives:
Delegates will learn how to carry out inspections and risk
assessments as well as how to correctly position the vehicle,
load and unload in a safe manner. The course has a minimum
machine category requirement of scissor lifts and selfpropelled booms.
Content:
Selection of suitable vehicle for transportation of load
Method of loading and unloading
Position of load of on vehicle
Marking of large loads
How to secure the load
Safety checks
Positioning the vehicle for unloading
Log book issue
Course Includes:
IPAF Accreditation
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
IOSH Managing Safely Course
Venue:
In-House – On Site/Nationally
Duration:
4 Day (can be over 4 weeks)
Who Should Attend:
First line supervisors, Managers, Team Leaders, Foremen
Objectives:
IOSH Managing Safely is for managers and supervisors in any
sector, and any organisation. It’s designed to get managers up
to speed on the practical actions they need to take to handle
health and safety on behalf of their teams.
What they need to know – and are perhaps reluctant to learn
about – in a refreshingly informal way. Managing safely won’t
turn delegates into safety experts – but it will give them the
knowledge and tools to tackle the health and safety issues
they’re responsible for. Importantly, it brings home just why
health and safety is such an essential part of their job.
Course Includes:
IOSH Managing Safely Certificates
Lunch and Refreshments
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
Manual Handling Course
Venue:
In-House – Total Training Centre
Duration:
Half Day
Minimum Delegates:
6
Maximum Delegates:
12
This programme is designed for any person(s) who have to
train and/or assess those who are involved in manual handling
in the workplace i.e. Employers, Managers, Supervisors or
Operatives.
Aim:
To provide delegates with a thorough understanding of how to
minimise the risk of injury to themselves and others by
increasing awareness of potential manual handling hazards in
the workplace and their outcomes.
Content:
Health & Safety at work Act 1974
Manual handling regulations
Management of Health & Safety at Work Regulations
Accident statistics
The functions of the spine and muscular system
Typical injuries
Hazard identification and assessment of:
The task
The load
The working environment
Individual capabilities
Correct handling techniques
Practical exercises and tuition
Knowledge:
By the end of the course delegates will be able to:
Summarise the legislation and manual handling regulations
that relate to lifting in the workplace
Appreciate the financial impact on industry caused by
injuries from poor manual handling
Identify and assess potential hazards and chose appropriate
methods of risk control which includes the selection of any
lifting equipment that may be required
Carry out manual handling techniques in a safe and efficient
manner
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
Manual Handling Course
Training Methods:
A high proportion of group participation including practical exercises in lifting techniques,
supplemented with video and classroom based tutorials.
Additional Information:
Delegates should provide a passport photograph on the day of training for production of ID
Cards.
For training held at your own location please ensure you make available a classroom
suitable for the number of delegates attending, with a 240v power supply.
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
PASMA - Tower Scaffold Course
Venue:
Derby - Nottingham
Duration:
1 Day
Minimum Delegates:
1
Maximum Delegates:
12
Objectives:
This course is for delegates who erect, move, alter, use,
dismantle or inspect lightweight tower scaffolding, or those
who supervise or manage such operations. This course will
give delegates knowledge of relevant regulations, codes of
practice and good safe working practices together with handson practical skills to enable them to safely do all of the above.
Content:
Types of Tower Scaffolding
Regulations and codes of practice
Stability of Towers
Use of outriggers and stabilizers
Cause of accidents associated with Towers (slide show)
Safe use of Towers
Loading on Towers
Understanding Manufacturer’s instructions
Practical erect, movement and dismantle of Tower
Scaffold
Practical Test
Knowledge Test
Course Includes:
*PASMA* Certificate and ID card providing 5 years proof of
competency.
(*Prefabricated Access Suppliers and Manufacturers Association)
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
PASMA Working at Height
Venue:
In House - Derby
Duration:
1 Day
Objectives:
This course is aimed at anyone who by virtue of their work is
required to plan and manage work activities which involve a
potential for a fall from height. This course will provide
knowledge of work at height method and principles in order to
create a safe system of work.
Course contents to cover:
Legislation when Working at Height
Risk Assessments Working at Height Hazards
Personal and Collective Fall Protection
Safe Working Platforms
Working Restraint V’s Fall Arrest
Ladders and Steps
Equipment Inspection Requirements and Procedures
Emergency Procedures and Rescue Plan
Course includes:
Refreshments/Lunch
PASMA 3 year Certification
Registration and Card
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
Plant Management Safety Training Scheme (PMSTS)
Venue:
In-House – Total Training Centre
Duration:
5 Day
Minimum Delegates:
6
Maximum Delegates:
12
Objectives:
This course will help Plant Managers, instructors, agents and
supervisors to manage health and safety on site, in the
training area and workshop area in accordance with legal
provisions and within the context of their management and
supervisory roles. The course will help to develop an
understanding of responsibilities and accountability for site
health, safety and welfare and to recognise a safe site that is
efficient, economical and productive.
Content:
The Health and Safety at Work Act
Accident Reporting and investigation
Responsibilities, offences and penalties etc.
Safety policies
General health and safety legislation
PPE
First Aid at Work
Risk Assessments and method statements
Safety inspections
Dust hazards and control of fumes
Work at height regulations/excavators/power/OLER
Buried services
Control of noise
Behaviour based safety
Vibration
Environmental management
Dangerous substances
Course Includes:
Construction Skills Site Safety Plus Certificates
Lunch
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
CITB Refrigeration Pipework & Brazing Commercial & Industrial
Duration: – 2 day:
The course is essential for all personnel who wish to be trained and certified competent in
brazing refrigeration & air conditioning copper Pipework. It is a practically Based course but
includes the required training in health & safety areas to enable candidates to competently
carry out the correct brazing techniques. The British Refrigeration Association has set the
criteria for the practical assessment hence this approved industry standards is strictly
adhered to ensure the workmanship and that best practices are shown and achieved.
1. General Safety:
1.1 General Duties of Employers
1.2 General Duties of Employees
1.3 Control of Substances Hazardous to Health Regulations 1988 (COSHH)
1.4 Protection Against Burns from Flames and Sparks
1.5 Protection from Fumes
1.6 Transport
1.7 Storage
1.8 Safety
1.9 Gas Cylinders in Fires
2. Refrigeration Pipework:
2.1 Introduction
2.2 Copper Tubing
2.3 Soft Drawn
2.4 Hard Drawn
2.5 Cutting Copper Tubing
2.6 Bending Copper Tubing
2.7 Flared Connections
2.8 Swaged Joint
2.9 Fittings
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
3. Oxy-acetylene Equipment:
3.1 Cylinder Safety Precautions
3.2 Acetylene
3.3 Explosion Risks
3.4 Oxygen
3.5 Gas Pressure Regulators
3.6 High Pressure Blowpipe
3.7 Backfires and Flashbacks
3.8 General Preparations
3.9 Setting the Gas Pressures
3.10 Lighting the Blowpipe
3.11 To Shut Down the Plant
3.12 Blowpipe Flame
3.13 The Neutral Flame
3.14 The Carburizing Flame
3.15 The Oxidising Flame
3.16 Power to the Flame
3.17 Brazing Alloys
4. Brazing Techniques:
4.1 Cutting and Fitting
4.2 Cleaning
4.3 Proper Fluxing
4.4 Assembling and Supporting
4.5 Purging System with Dry Nitrogen
4.6 Heating and Flowing the Alloy
4.7 Cleaning After Brazing
4.8 Points to Remember
4.9 Caution
4.10 Installation Planning
4.11 Pre-Site Checks
4.12 Pre-Installation Checks
4.13 Pressure Testing
5. Typical Defects - Causes and Remedies
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
Plant Refresher
Venue:
In House – Derby – Derbyshire
Duration:
1 Day
This can consist of two of the following:
Digger
Forward Tipper Dumper
Roller
Telehandler
(if the delegate is a competent user then these are half day per plant, if not see below)
Plant New User
Venue:
In House - Derby – derbyshire
Duration:
3-4 Days
Plant as above but only one per course.
Maximum Delegates:
1
For companies requiring National Plant and CPCS additional costs incurred are.
CPCS:
Practical: +£25.00
Theory: +£25.00
Maximum of 3 delegates per day for CPCS as time limits
imposed.
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
Portable Appliance Testing Course
Venue:
In-House – On-site
Duration:
1 Day 8am-5pm
Minimum Delegates:
1
Maximum Delegates:
6
Objectives:
Designed for persons within a hire environment to test any
electrical equipment to prove electrical safety. Course will
cover checking, testing, labelling and recording to enable the
candidate to become confident and competent in visual
inspections and the use of portable appliance testers. The
course covers all hire equipment across all voltages, cycles and
DC.
Content:
H & S Legislation
Reasons for testing, electrical safety
Methods of construction of equipment
Frequency / framework of testing
Visual inspections
230 / 110 volt equipment tests
Testing Class 1 appliances – identifying results
Testing Class 2 appliances – identifying results
Interpretation of fault indications
Completion of statutory and company recording
documentation
Testing the integrity of the PAT
Course Includes:
Buffet Lunch and refreshments
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
Safe Working at Height
Venue:
In House - Total Training Centre
Duration:
Half Day
Min Delegates:
4
Max Delegates:
12
Course contents to cover:
Work at Height Regulations 2005
(WAHR)
Planning Working at Height
Risk Assessment: Based on Clients own *Risk Assessment
or Classroom Risk
Assessment
Selection and Use of Work Equipment
Communication
Rescue Plan
Reporting Procedures
Selecting the Correct P.P.E.
Staging/Trestles
MEWPS (Mobile Elevated Work Platforms)
Discussions Covering:
Fully Body Harness
Restraint Lanyard
Fall arrest Lanyard
Netting
Guard-Rails
Course includes:
Certificates
Refreshments
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
Site Management Safety Training Course
Venue:
In-House – Total Training Centre
Duration:
5 Day (or 3 day and 2 day block over 2 weeks)
Minimum Delegates:
6
Maximum Delegates:
12
Objectives:
This course is intended to give site managers, agents and
others a clear understanding of how to manage health and
safety on site, develop an understanding of responsibilities
and accountability for site health, safety and welfare, and
recognise that a safe site is efficient, economical and
productive.
Content:
Introductive and feedback on pre-course exercise
Health and Safety Law (including exercise)
Health and Safety and the Manager
Working at Height and the working environment
Management of contractors, plant, equipment and systems
of work
Managers and supervisors responsibilities (exercise)
Health and Safety management and monitoring on site
Site briefing exercise
Health and Safety communication training
Construction health and safety
Site Layout (excursive)
Examination
Close and debrief
Course Includes:
GE700 Manuals (£89.50 per delegate)
XA6 Course/Study Notes (£38 per delegate)
Certificates (£35 per delegate)
Buffet Lunch and refreshments
Because literature and registration is required for this course has to be booked at least 3
weeks in advance.
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
SMSTS 2 Day Refresher Course
Venue:
In-House – Total Training Centre
Duration:
2 Day
Minimum Delegates:
6
Maximum Delegates:
12
Objectives:
This course is to give understanding of delegates’
responsibilities and accountability for site safety, health and
welfare and current health and safety legislation, including risk
assessments.
Content:
Current focus of HSE’s attention
Risk assessment and method statements
Construction (Design and Management) Regulations 2007
Construction Health, Safety and Welfare (CDM Part 2)
Reporting of Accidents, Diseases and Dangerous
Occurrences
Overview and changes to the current legislation affecting
construction to include:
 Working at Height Regulation 2005
 Control of Substances Hazardous to Health 2002
 Control of Vibration at Work Regulations 2005
 Control of Noise at Work Regulations 2005
Fire on construction sites including Fire Safety Order 2005
Construction Waste and Site Waste Management plans
Course Includes:
GE700 Manuals (£89.50 per delegate)
XA6 Course/Study Notes (£38 per delegate)
Certificates (£35 per delegate)
Buffet Lunch and refreshments
Because literature and registration is required this course has to be booked at least 3 weeks
in advance. For the refresher, certification from initial course is also required.
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
SSSTS 2 Day Course
Venue:
In-House – Total Training Centre
Duration:
2 Day
Minimum Delegates:
6
Maximum Delegates:
12
Objectives:
This course is intended to give site supervisors a clear
understanding of how health and safety affects their role and
the practical steps they can take to ensure a safe site.
Content:
The Health and Safety at Work Act and relevant
regulations
Specific site issues, which include topics as working at
height
Tool box talks
Control of subcontractors
Health issues
Qualification/Certification
Construction Skills Site Safety Plus Certificate
Course Includes:
GE700 Manuals (£89.50 per delegate)
XA6 Course/Study Notes (£38 per delegate)
Certificates (£35 per delegate)
Buffet Lunch and refreshments
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
Course: NRSWA Reassessment | Street Works Reassessment
Course Duration:
Two Day
Aims:
Reassessment of the City and Guilds NRSWA Street Works
units
Re-registration with the Street Works Qualification Register
(SWQR)
Re-issue of the Scotvec Street Works Card accredited by SWQR
Overview:
As of April 2011, any individual working on the highways who
wishes to re-register with the SWQR, and be issued with a new
Scotvec Street Works card must be re-assessed by an pproved
centre, such as Llite. Upon successful completion of Llite's
NRSWA reassessment course we will re-register you with the
SWQR, who will issue you with a new Scotvec Street Works
card; permitting you to work legally on the highways.
Reassessment is undertaken through an open-book, multiple choice question paper for each
unit. Each Unit reassessment consists of a 10 question multiple choice exam, which must be
completed (under exam conditions) within a 30 minute period. Each unit exam requires a
pass rate of at least 80% (8 out of 10 questions correct) and all units MUST achieve this pass
rate before the card can be renewed. Candidates may renew their card six months prior to
the expiry date.
If your card has already expired you can still renew it because there is a six month grace
period.
The price includes:
Access to assessment materials
Reassessment exams for each unit held by the candidate (up to a maximum of seven units)
Re-sits if necessary (up to a maximum of three*)
Re-registration with City & Guilds
Re-Registration with SWQR
Issuing of your renewed Street Works Card
Please note that in order to successfully claim your card we can only book courses for
candidates whose card expired no more than 18 weeks ago. If a candidate requires further
re-sits on an alternative day they will need to return to us to sit those exams only. *Should
you require more than three re-sits you will need to attend at a later date to complete the
reassessment process.
We also run full Operative and Supervisor courses.
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
Certifications Awarded:
City & Guilds Unit Qualifications
Scotvec Street Works Card (SWQR)
Course content:
Unit 001 - Location & avoidance of underground services
Unit 002 - Signing, Lighting & Guarding
Unit 003 - Excavation in the highway
Unit 004 - Reinstatement & compaction of backfill materials
Unit 005 - Reinstatement of non-bituminous sub base & road base materials
Unit 006 - Laying practices & reinstatement of cold lay bituminous materials
Unit 007 - Reinstatement of hot-lay bituminous materials
Unit 008 - Reinstatement of concrete slabs
Unit 009 - Reinstatement of modular surfaces & concrete footways
Unit 010 - Monitoring Signing, Lighting & Guarding
Unit 011 - Monitoring Excavation in the highway
Unit 012 - Monitoring Reinstatement & compaction of backfill materials
Unit 013 - Monitoring Reinstatement of non-bituminous sub-base & road-base materials
Unit 014 - Monitoring Laying practices and reinstatement of cold lay bituminous materials
Unit 015 - Monitoring reinstatement of concrete slabs
Unit 016 - Monitoring Reinstatement of modular surfaces & concrete footways
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk
Temporary Works Co-ordination
Venue:
In-House – Total Training Centre
Duration:
1 Day
Minimum Delegates:
4
Maximum Delegates:
20
Objectives:
At the conclusion of the course delegates should:
Understand the personnel and functions involved in
Temporary works
Appreciate the legal liabilities surrounding the duty holders
Have improved awareness of temporary works and the
responsibilities they may encounter
Be aware of key factors in Temporary Works Systems
Content:
Temporary Works and the Law
The need for a Temporary Works Policy
Role of TWC/Supervisor & TW Procedures
Groundworks
Formwork
False work
Scaffolding
Temporary Works Awareness
Sessions will be a mixture of lectures, discussion periods and
group work
Course Includes:
Buffet Lunch and refreshments
For information please contact:
Jane Rice | Training Co-ordinator | Training Centre| Alfreton Road | Derby | DE21 4AG
01332 830399 | M: 07587 777670
E: jane@totalhireandsales.co.uk | W: www.totalhireandsales.co.uk