A&E Specifications
IS-IP200-DN
IS-IP200-DN
InSight™ IP 2.0 Megapixel Fixed-Day/Night
Bid-Spec
1.0 Description
The IS-IP200-DN camera is a Quad-streaming, H.264 & MJPEG encoding, 2.0 Megapixel resolution, IPaddressable network camera. It is designed to deliver full-motion, high-definition, progressive scan digital
video across local area networks. The IS-IP200-DN features a design with no moving parts, a 1/2.7"
CMOS sensor, Power over Ethernet, and Audio-In/Audio-Out. The IS-IP200-DN is a high-level, cost
effective megapixel network camera.
2.0 Bid Specification























The camera shall utilize one high-sensitivity 2.0 Megapixel CMOS sensor with a 1/2.7” optical format.
The camera shall support MJPEG or H.264 encoding format.
The camera shall output at a maximum resolution of 1920(H) x 1080(V) pixels per sensor.
The camera’s frame rate shall be 15 frames per second at the maximum resolution of 1920(H) x
1080(V).
This camera shall feature a tampering alarm.
The camera shall feature streaming of the full field of view (FOV) and multiple regions of interest (ROI)
for forensic zooming.
This camera shall provide 3D image noise reduction.
The camera shall be equipped with a 100 Mbps LAN connector.
The camera shall support a minimum IPv4/v6, UDP, ICMP, SMTP, PPPoE, UPnP, IGMP, SNMP, QoS,
TCP/IP, HTTP(S), FTP, RTP/RTSP, and DHCP network protocols.
The camera shall feature automatic exposure, automatic multi-matrix white balance, shutter speed
control, programmable brightness, saturation, gamma and sharpness.
The camera shall incorporate necessary algorithms and circuits to detect motion in low light with
clarity.
The minimum light requirement to produce a color image shall be approximately 0.2 lux at F/1.2 lens.
The minimum light requirement to produce a black and white image shall be approximately 0.02 lux at
F/1.2.
The camera’s primary power source shall be Power over Ethernet (PoE) complying with the IEEE
802.3af standard.
The camera shall have the alternative option to be powered from a 12V DC power source, or 24V AC
power source providing at least 4W.
This camera shall come with optional heater and blower housing.
This camera shall feature an IR cut filter for night viewing.
This camera shall feature an optional durable aluminum housing that minimizes fire hazards.
The camera shall be mounted directly to a wall using a wall mount accessory.
This camera shall support BNC output.
The camera’s operating ambient temperature is -10ºC (14ºF) to 50ºC (122ºF).
The camera shall feature an auto recovery mechanism called Embedded Watchdog that will recover
the camera if it is acting abnormally.
The camera will have a factory burned in MAC (Media Access Control) address ranging from
00:50:C2:A9:80:00 thru A9:8F:FF, 40:D8:55:0E:C0:00 thru 0E:CF:FF, or 0C:EF:AF:40:00:00 thru
4F:FF:FF that is registered and owned by Sentry360 through IEEE Registration Authority.
Page 1
23807 W Andrew Rd, Suite B | Plainfield, IL 60585 | (800) 261-2707 | www.sentry360.com
A&E Specifications
IS-IP200-DN
IS-IP200-DN
InSight™ IP 2.0 Megapixel Fixed-Day/Night
The IS-IP200-DN is equipped with a CS mount that accommodates a wide variety of lenses listed below:
Lens
Focal Length
SEN-2MP-2812
SEN-2MP-550
2.8 - 12.0 mm
5.0 - 50 mm
Maximum frame rates for typical resolutions (clipped mode) are given below:
Resolution
Frame Rate
1920 x 1080
1920 x 1080
1280 x 1024
1280 x 720
1024 x 768
800 x 600
720 x 480
640 x 480
352 x 240
15 (Low Latency)
15
30
30
30
30
30
30
30
Quick-Spec
3.0 Minimum Performance Specification
The IS-IP200-DN megapixel camera will meet the following operating requirements:
Operational
Imaging
Active Pixel Count
Dynamic range
Auto Recovery
One 2.0 megapixel CMOS image sensor 1/2.7” optical format
1920(H) x 1080(V) pixel array per sensor
95 dB
Embedded watchdog
Image
Format
Compression
JPEG still images and Motion-JPEG video or H.264
High speed hardware-based image compression
Full Field of View (FOV) Resolutions
1920(H) x 1080(V) 2.0 megapixel
Data Transmission
Data Rate MJPEG
Data Rate H.264
Video Frame Rate
Max Frame Rate
9.8 Mbps @ 1920 x 1080
2.2 Mbps @ 1920 x 1080
15 fps @ 1920 x 1080
30 fps @ 1280 x 1024
Page 2
23807 W Andrew Rd, Suite B | Plainfield, IL 60585 | (800) 261-2707 | www.sentry360.com
A&E Specifications
IS-IP200-DN
IS-IP200-DN
InSight™ IP 2.0 Megapixel Fixed-Day/Night
Environmental
Operating Temperature
Storage Temperature
Humidity
Protection Level
-10 to 50 Degrees Celsius
-40 to 70 Degrees Celsius
10-90% relative, non-condensing
IP66 (with optional housing)
Regulatory
Emissions
Certification
Safety
FCC: Part 15, Class B
CE
UL Listed
Supported Protocols
Standards
TCP/IP, HTTP, FTP, RTP/RTSP, DHCP, IPv4/v6, UDP, HTTPS, ICMP,
SMTP, PPPoE, UPnP, IGMP, SNMP, QoS, ONVIF
Security
Access
Password / username protection for restricted camera access
Electrical
Consumption
Power over Ethernet
DC12V
AC24V
4 watts maximum
PoE 802.3af compliant
12 VDC +/- 10% Power
24 VDC +/- 10% Power
Camera Networking Requirements
 For ease of operation IS-IP200-DN possesses a built-in web, TFTP, and HTTP servers which can be
used to acquire images from the camera and to make adjustments of camera operation parameters.
 Images from the camera can be received using practically any internet browser by means of sending
human-readable API requests from the browser command line.
 The camera possesses a built-in ActiveX component that provides extended functionality when used
with Microsoft Internet Explorer. This option provides an easy to use graphical user interface.
 The built-in ActiveX component provides the ability to view streaming video from the camera and to
capture separate images as well as video streams using codecs available on the host computer.
 The ActiveX component provides convenient access to the camera settings and operation statistics.
 The camera provides integrated support for IP, TCP, FTP, UDP, ICMP, SMTP, DHCP, HTTP, HTTPS,
IPv4/v6, PPPoe, QoS, ONVIF, UPnP, and IGMP protocols.
 Software for viewing and controlling the camera is provided with the camera at no additional charge.
Event (Alarm) Handling Capability
 Alarm events can be triggered by motion detection in certain zones. In the case of the alarm being
triggered, a specified number of images before/after the trigger can be saved along with the time
stamp of when the alarm was triggered
Connectors
 RJ-45 Ethernet connector (IEEE 802.3af PoE compliant)
 Power Supply: DC Jack
Power Specification
 Power Consumption: 4 watts
 Power requirement: 12 VDC/ 24 VAC or via a 3-pin removable connector or via IEEE 802.3af Power
over Ethernet on CAT-5 cable.
Page 3
23807 W Andrew Rd, Suite B | Plainfield, IL 60585 | (800) 261-2707 | www.sentry360.com
A&E Specifications
IS-IP200-DN
IS-IP200-DN
InSight™ IP 2.0 Megapixel Fixed-Day/Night
Mechanical Specifications
 Weight: 0.73 lbs (331 g)
 Dimensions w/o lens: 4.92 x 3.22 x 2.05 in (125 x 82 x 52 mm)
 Camera contains no moving parts
 Lens mount: Native CS-mount or C-mount with a C/CS adapter
Model Number
 IS-IP200-DN InSight™ IP 2.0 Megapixel Fixed-Day/Night
Warranty
 Minimum 3 Year Parts and Labor
Sentry360, Inc. reserves the right to change products or specifications without notice.
Page 4
23807 W Andrew Rd, Suite B | Plainfield, IL 60585 | (800) 261-2707 | www.sentry360.com