A&E Specifications
FS-IP3000-M
FS-IP3000-M
FullSight™ IP 3.0 Megapixel Ultra-Compact 360° Dome
Bid-Spec
1.0 Description
The FS-IP3000-M camera is an MJPEG or H.264 encoding, 3.0 Megapixel resolution, IP addressable 360
degree camera. It is designed to deliver full-motion, high-definition, progressive scan digital video across
local area networks. The FS-IP3000-M features a design with no moving parts, creating a full 360 degree
view. An optically corrected panoramic lens, designed exclusively for the FullSight™ camera, allows for
immersive 360 degree live view as well as pan-tilt-zoom during playback with the use of Sentry360’s API
or SDK with any 3rd party network video recording software certified partner. User Interface options of live
or playback can be one of the following: Panoramic Display, Quad Virtual Camera display, Single Virtual
PTZ camera display, or panoramic with two virtual camera display with calibrated PTZ capability between
the panoramic image and virtual cameras. The FS-IP3000-M is a cost effective, high-level, megapixel
network camera.
2.0 Bid Specification




















The camera shall utilize one high-sensitivity 3.0 Megapixel CMOS sensor with a 1/2.5” optical format.
The camera shall support MJPEG or H.264 encoding format.
The camera shall output at a maximum resolution of 2048(H) x 1536(V) pixels per sensor.
The camera’s maximum frame rate shall be 15 frames per second at the reduced resolution of 2048(H)
x 1536(V).
The camera shall use one 1.27 mm f-theta optical proprietary designed fisheye lens that shall be premounted and focused on the camera.
The camera’s overall imaging shall provide a 360 degree field of view.
The camera shall feature streaming of the full field of view (FOV) and multiple regions of interest (ROI)
for forensic zooming.
This camera shall provide 3D image noise reduction.
The camera shall be equipped with a 100 Mbps LAN connector.
The camera shall support a minimum IPv4/v6, UDP, ICMP, SMTP, PPPoE, UPnP, IGMP, SNMP, QoS,
TCP/IP, HTTP(S), FTP, RTP/RTSP, and DHCP network protocols.
The camera shall feature automatic exposure, automatic multi-matrix white balance, shutter speed
control, programmable brightness, saturation, gamma and sharpness.
The camera shall incorporate necessary algorithms and circuits to detect motion in low light with
clarity.
The minimum light requirement to produce a color image shall be approximately 0.04 lux at F1.8.
This camera shall have a power consumption of 3.5W.
The camera’s primary power source shall be Power over Ethernet (PoE) complying with the IEEE
802.3af standard.
This camera shall feature a durable polycarbonate housing that minimizes damages from weather with
a rating of IP66.
The camera shall be mounted directly to a wall or ceiling.
The camera’s operating ambient temperature is -10ºC (14ºF) to 50ºC (122ºF).
The camera shall feature an auto recovery mechanism called Embedded Watchdog that will recover
the camera if it is acting abnormally.
The camera will have a factory burned in MAC (Media Access Control) address ranging from
00:50:C2:A9:80:00 thru A9:8F:FF, 40:D8:55:0E:C0:00 thru 0E:CF:FF, or 0C:EF:AF:40:00:00 thru
4F:FF:FF that is registered and owned by Sentry360 through IEEE Registration Authority.
Page 1
23807 W Andrew Rd, Suite B | Plainfield, IL 60585 | (800) 261-2707 | www.sentry360.com
A&E Specifications
FS-IP3000-M
FS-IP3000-M
FullSight™ IP 3.0 Megapixel Ultra-Compact 360° Dome
Maximum frame rates for typical resolutions (clipped mode) are given below:
Resolution
Frame Rate
2048 x 1536
1920 x 1080
1280 x 1024
1280 x 720
1024 x 768
800 x 600
720 x 480
640 x 480
352 x 240
15
30
30
30
30
30
30
30
30
Quick-Spec
3.0 Minimum Performance Specification
The FS-IP3000-M megapixel camera will meet the following operating requirements:
Operational
Imaging
Active Pixel Count
Dynamic range
Auto Recovery
One 3.0 megapixel CMOS image sensor 1/2.5” optical format
2048(H) x 1536(V) pixel array per sensor
95 dB
Embedded watchdog
Image
Format
Compression
JPEG still images and Motion-JPEG video or H.264
High speed hardware-based image compression
Full Field of View (FOV) Resolutions
2048(H) x 1536(V) 3.0 megapixel
Data Transmission
Data Rate MJPEG
Data Rate H.264
Video Frame Rate
Max Frame Rate
18.2 Mbps @ 1920 x 1080
4.5 Mbps @ 2048 x 1536
15 fps @ 2048 x 1536
30 fps @ 1920 x 1080
Environmental
Operating Temperature
Storage Temperature
Humidity
Protection Level
-10 to 50 Degrees Celsius
-40 to 70 Degrees Celsius
10% to 90% relative, non-condensing
IP66
Regulatory
Emissions
Certification
Safety
FCC: Part 15, Class B
CE
UL Listed
Page 2
23807 W Andrew Rd, Suite B | Plainfield, IL 60585 | (800) 261-2707 | www.sentry360.com
A&E Specifications
FS-IP3000-M
Supported Protocols
Standards
FS-IP3000-M
FullSight™ IP 3.0 Megapixel Ultra-Compact 360° Dome
TCP/IP, HTTP, FTP, RTP/RTSP, DHCP, IPv4/v6, UDP, HTTPS, ICMP,
SMTP, PPPoE, UPnP, IGMP, SNMP, QoS, ONVIF
Security
Access
Password / username protection for restricted camera access
Electrical
Consumption
Power over Ethernet
3.5 watts maximum
PoE 802.3af compliant
Camera Networking Requirements
 For ease of operation the FS-IP3000-M possesses a built-in web, TFTP, and HTTP servers which can
be used to acquire images from the camera and to make adjustments of camera operation
parameters.
 Images from the camera can be received using almost any internet browser by means of sending
human-readable API requests from the browser command line.
 The camera possesses a built-in ActiveX component that provides extended functionality when used
with Microsoft Internet Explorer. This option provides an easy-to-use graphical user interface.
 The built-in ActiveX component provides the ability to view streaming video from the camera and to
capture separate images as well as video streams using codecs available on the host computer.
 The ActiveX component provides convenient access to the camera settings, and operation statistics.
 The camera provides integrated support for TCP/IP, HTTP, FTP, RTP/RTSP, DHCP, IPv4/v6, UDP,
HTTPS, ICMP, SMTP, PPPoE, UPnP, IGMP, SNMP, QoS, and ONVIF protocols.
 Software for viewing and controlling the camera is provided with the camera at no additional charge.
Event (Alarm) Handling Capability
 Alarm events can be triggered by motion detection in certain zones. In the event of the alarm being
triggered, a specified number of images before/after the trigger can be saved along with the time
stamp of when the alarm was triggered.
Connectors
 RJ-45 Ethernet connector (IEEE 802.3af PoE compliant)
Power Specification
 Power Consumption: 3.5 watts
 Power requirement: IEEE 802.3af Power over Ethernet on CAT-5 cable.
Mechanical Specifications
 Weight: 0.40 lbs (180 g)
 Dimensions w/o lens: 4.3 x 1.9 in (110.2 x 47.7 mm)
 Camera contains no moving parts
 Lens mount: M12 Board Lens
Model Number
 FS-IP3000-M FullSight™ IP 3.0 Megapixel Ultra-Compact 360° Dome
Warranty
 Minimum 3 Year Parts and Labor
Sentry360, Inc. reserves the right to change products or specifications without notice.
Page 3
23807 W Andrew Rd, Suite B | Plainfield, IL 60585 | (800) 261-2707 | www.sentry360.com