SHY FORM 2F Type of application initial application revision of initial application Notification of surrender change Contact detail(s) Nominated persons Other(s) Type of changes Organization name Address(s) Number of staff rating(s) F Maintenance organization approval reference TR.MG. 1. Applicant Name Registered name of applicant Trading name (if different) 2. Applicant Postal Address 3. Address of site(s) requiring approval Principal Place of Business address Base, Engine and Component Maintenance site(s) (if different from the Principal Place of Business) Line maintenance location(s) 4. Quality Manager Contact Details Name Tel Number Quality e-mail Fax Number Organization generic e-mail 5. Scope Of F Maintenance Organization Approval Relevant To This Application 6. Proposed (*) Accountable Manager Contact Details Name Tel Number E-mail address Place Signature of the (proposed*) Accountable Manager Doküman No: SHGM.UED.26005653.FR.2F Revizyon No – Tarihi: 00 – 00/00/0000 SHY FORM 2F 1/2 Fax Number Date SHY FORM 2F CLASS RATING A2 LIMITATION BASE LINE Quote the expected aircraft type to be added and / or deleted. Yes/No Yes/No Quote the expected aircraft type to be added and / or deleted. Yes/No Yes/No Quote aircraft type or group Yes/No Yes/No Aeroplanes/airships 5700 Kg and below AIRCRAFT A3 Helicopters A4 Aircraft other than A1, A2 or A3 B1 Quote the expected engine type(s) to be added and / or deleted as defined in the engine TCDS. Turbine ENGINES B2 Quote engine manufacturer or group or type ) to be added and / or deleted as defined by the OEM Piston B3 Quote the expected APU type(s) to be added and / or deleted as defined by the OEM APU COMPONENTS OTHER THAN COMPLETE ENGINES OR APUs C1 Air Cond & Press C2 Auto Flight C3 Comms and Nav C4 Doors - Hatches C5 Electrical Power & Lights C6 Equipment C7 Engine - APU C8 Flight Controls C9 Fuel C10 Helicopter - Rotors C11 Helicopter - Trans C12 Hydraulic Power C13 Indicating/recording system C14 Landing Gear C15 Oxygen C16 Propellers C17 Pneumatic & Vacuum C18 Protection ice/rain/fire C19 Windows C20 Structural C21 Water ballast C22 Propulsion Augmentation [Shall state aircraft type or aircraft manufacturer or component manufacturer or the particular component and/or the maintenance task(s) and/or cross refer to a capability list in the exposition]. “C” ratings to be ticked where necessary Eddy Current Inspection Liquid Penetrant Inspection Magnetic Particle Inspection SPECIALISED SERVICES D1 Non Destructive Testing Radiography Inspection Shearography Inspection Thermography Inspection Ultrasonic Inspection Other Method Doküman No: SHGM.UED.26005653.FR.2F Revizyon No – Tarihi: 00 – 00/00/0000 SHY FORM 2F 2/2 Shall state particular NDT method(s)