1|Page
ICES-2015
Conference Program
2nd Dec 2015
Day 1, Inauguration
08:30
Registration
9:30
Guests to be seated
10:00
Arrival of Chief Guest
10:00
Recitation from the Holy Qur’an and Hadith
10:05
National Anthem
10:10
Welcome address by the Director
10:20
Keynote lecture
10:40
Address by the Chief Guest
10:55
Vote of thanks by the Dean
11:00
Tea Break
9:30 to 11:00
Hall A, Day 1, Technical Session 1
11:30 to 13:30
Chair: Prof. Dr. Aamir Ijaz and Prof. Dr. Muhammad Suleman Tahir
Time
11:30
Title/Authors
Computational heterogeneous catalysis at a metal–water Interface
Dr. Muhammad Faheem (UET Lahore)
11:50
Development of Mesoporous Alumina Based Catalysts for the dehydration of methylcyclohexane
Muhammad Sarfraz Akram (CIIT), Dr. Muhammad Rashid Usman (ICET,PU)
12:10
Advances In off gas Purification
Prof. Dr. Muhammad Suleman Tahir (UoG)
12:30
Emerging Applications of Hollow Fibre Membrane Contactors in Process Industry
Waheed ur Rehman (UET Peshawar)
12:50
Development of dirt and ALGAE resistive latex façade paint
Engr. Sheraz ahmed qureshi ( Brighto Paints)
Hollow Fiber Membrane Contactors: An Emerging Technology for value added Industry
13:10
Dr. Mohammad Younas (UET Peshawar)
2|Page
Hall A, Day 1, Technical Session 2
14:30 to 16:30
Chair: Prof. Abdullah Khan Durrani and Prof. Dr. Naveed Ramzan
Time
14:30
Title/Authors
Stability of Filter Bags in Industrial Applications
Prof. Dr. Mahmood Saleem (ICET, PU)
Hydropower potential in Azad Kashmir
Engr. Sh. Mushtaq Ahmed
PIChE
14:50
15:10
15:30
15:50
Commercialization of Chemical Engineering Practices
Dr. Nazakat Ali (IST, Islamabad)
Process Safety: State-of-Play, Current and Future Challenges
Prof. Dr. Naveed Ramzan (UET Lahore)
Sensitivity analysis of key parameters of an Amine Sweetening Unit
Muhammad Sher Khan, Muhammad Imran Ahmad, Jamil Ahmed
Department of Chemical Engineering, University of Engineering and Technology, Peshawar
16:10
Potential for sugar Industry by products/wastes utilization
Abdullah Khan Durrani, Sajjad Ahmad Wainse
ICET, PU, Lahore
Hall A, Day 2, Technical Session 3
9:30 to 11:30
Chair: Prof. Dr. Rafi Ullah Khan and Prof. Dr. Asadullah Khan
Time
9:00
Title/Authors
LTSC Catalytic Reaction Modeling using Aspen Plus Software
Syed Waqar Ul Hassan
FFC
Advanced Monte Carlo Modeling of PWR Using MCBEND
Muhammad Naveed Khan
PIEAS, Islamabad
9:20
9:40
10:00
Quantification of the Probability of Health Effects by Exposure to Nano-Materials
M. H. Hassan1, Prof. Dr.-Ing. U. Krause2, Dr.-Ing. H. Krause2
1 Institute of Quality & Technology Management, University of the Punjab, Lahore
2 Institute of Process and Environment, Otto von Guericke University, Magdeburg, Germany
CO2 foam for CO2 mobility control using a unique surfactant structure for EOR Applications
Muhammad Sagir, Muhammad Suleman Tahir
University of Gujrat
10:20
Numerical Investigation of fire whirls
Aiman Fatima, Muhammad Asim Ibrahim, Ahtisham Arshad
PAEC & PIEAS Islamabad
10:40
Hydrodynamic study on uniform fluidization in fluidized bed reactor using ANSYS-CFD
Saadat Ullah Khan Suri, Mahmood Saleem
ICET, University of the Punjab, Lahore
Hall A, Day 2, Technical Session 4,
11:30 to 13:30
Chair: Prof. Dr. Shahid Munir and Prof. Dr. Saeed Gul
Time
11.30
Title/Authors
Fixed bed reactor pressure drop causes and effects
Muhammad Adnan Hanif
Fauji Fertilizer Company
3|Page
11:50
Effect of heat dynamics on fast pyrolysis of biomass in a fluidized bed reactor using ANSYS-CFD
Saadat Ullah Khan Suri, Mahmood Saleem
ICET, University of the Punjab, Lahore
12:10
The Use of Mesoporous Catalysts for the Hydrocracking of a Model Plastic Mixture
Dureem Munir, Muhammad Rashid Usman, Mahmood Saleem
ICET, University of the Punjab, Lahore
12:30
Biomass Gasification Technology a Fuel Source for I.C. Engines
Sadiq Hussain (IET), Akhtar Ali Karlu (IET), Khurrm Shahzad (CCT), Niaz Ahmad Akhtar (UET
Taxila)
12:50
Production of Coal Binder by Pyrolysis of Coal
Faheem Raza, Muhammad Farooq Bashir, Noraiz Hayat Abbasi, Muhammad Asim Ghaffar, Rafi
Ullah Khan
ICET, University of the Punjab, Lahore
Life Cycle Assessment (LCA) of Sugar Industries using Process Practical Sensitivity Analysis: An
Environmental Chain Analysis of Pakistan Sugar Industries
Zaman Sajid
13:10
Hall A , Day 2, Technical Session 5
14:30 to 16:30
Chair: Dr. Syed Nadir Hussain and Dr. Amir Shafeeq
Time
14:30
14:50
15:10
Title/Authors
Plant Operational Reliability Assessment Using Dynamic Simulation
Asim Ur Rehman
FFC
Effects of noise pollution caused by vehicles on hypertension of people of Lahore
Danish Arfi, Harris Saddiqi, Kamal Shahid, Shafiq Rana, Kamaran Abid, Muhammad Azhar
Naeem
CEET, University of the Punjab, Lahore
Plant Operational Reliability Assessment Using Dynamic Simulation
Iftikhar Ahmad Kirmani
FFC
15:30
“Explosion Hazards in Lube Oil/Seal Oil Reservoirs of rotating equipment’s due to improper
working of shaft seals/seal supporting system” A case study of ammonia plant
Ghulam Abbas, Abdul Bari, Zohaib Adeel
15:50
Assessment of leadership value & action trait of Safety Culture program in Pakistan Research
Reactors
Muhammad Burhan Ud Din
PAEC Islamabad
16:10
Adsorption of Congo red Dye from Aqueous Solution using Low Cost Adsorbents
Sharjeel Waqas, Muhammad Nawaz, Muhammad Usman Tahir
University of Faisalabad
Hall B, Day 1, Technical Session 1
11:30 to 13:30
Chair: Prof. Dr. Rafiq Ahmad, Dr.Muhammad Kamran
Time
11:30
12:00
Title/Authors
Current Status of RFeB Magnets and their Corrosion Protection
Akhlaq Ahmad, Khalid Mehmood Ghauri, Gul Hameed Awan
UET Lahore
Modeling of Chloride Ion Penetration in concrete with empirical approach
4|Page
12:30
13:00
Nazakat Hussain, Muhammad Rizwan, Anwar Khitab
IST Islamabad
Anodizing and Characterization of A2024 Aluminum Alloy
Umme Fatima, Muhammad Kamran, Abdus Salam, Rafiq Ahmad
Department of Metallurgy and Materials Engineering, College of Engineering and Emerging
Technologies, Punjab University, Lahore
Development and Characterization of Locally Developed Carbon Fiber Copper based
Composites
Abubaker Khan, Tahir Ahmad, Muhammad Kamran, Rafiq Ahmad
Department of Metallurgy and Materials Engineering, College of Engineering and Emerging
Technologies, University of the Punjab, Lahore Pakistan
Hall B, Day 1, Technical Session 2
14:30 p.m. to 16:00 p.m.
Chair: Prof. Dr. Taqi Zahid Butt, Dr. Tahir Ahmad
14:30
15:00
Development & Characterization of Bamboo/ Banana fibers and Rice Husk Ash Reinforced
Polypropylene Hybrid Composite
Khalid Mehmood Ghauri, Akhlaq Ahmad, Gul Hameed Awan
UET Lahore
Evaluation of Electrical, Mechanical and Wear Properties of Aluminum based Hybrid
Composites
Maida Bashir, Tahir Ahmad, Muhammad Kamran, Rafiq Ahmad
Department of Metallurgy and Materials Engineering, College of Engineering and Emerging
Technologies, University of the Punjab, Lahore Pakistan
15:30
Hall B, Day 2, Technical Session 3
9:00 to 11:00
Session Chair: Prof. Dr. Abdus Salam, Prof. Dr. Aqil Inaam
9:00
Development of Graphitic Free-cutting 4982 Steel
A. Inam1, R. Brydson2 and D. Edmonds2
1Department
9:30
10:00
10:30
of Metallurgy and Materials Engineering, University of the Punjab, Lahore-54590,
Pakistan.
2Institute for Materials Research, University of Leeds, Leeds, LS2 9JT, UK.
A Study of Quenched and Partitioned AISI 1141 Steel
A. Inam, M. Ishtiaq, R. Ahmad, M. Mustafa and M. Hafeez
Department of Metallurgy and Materials Engineering,
University of the Punjab, Lahore
A Study of Effect of Starting Microstructure of AISI 1045 Steel on the Roughness of Electric
Discharge Machined Surface
M. R. Z. Chauhdry1, M. A. M. Qureshi2, A. Inam3, M. Ishtiaq3
1Department of Technology, UOL, Lahore
2Department of Industrial & Manufacturing Engineering, UET, Lahore
3Department of Metallurgy & Materials Engineering, PU, Lahore
Failure Analysis of Catholically Protected High Pressure 18 ̋ Diameter Gas Transmission Pipeline
Syed Wajahat Hussain, Muhammad Kamran*, Tahir Ahmad, Muhammad Taqi Zahid Butt
Department of Metallurgy and Materials Engineering, CEET, University of the Punjab, Lahore
Hall B, Day 2, Technical Session 4
11:30 to 13:30
Chair: Dr. Ihtesham-ur-Rehman, Dr. Umer Manzoor
Time
11:30
12:00
Title/Authors
Importance of materials characterisation in biomaterials
Prof. Dr. Ihtesham ur Rehman, The University of Scheffield, UK
Study the Effects of Polymer Coating on Scaffolds Developed from Cuttlefish bone for
Biomedical Applications
5|Page
Faisal Manzoor1, Muhammad Kamran1*, Saadat Anwar Siddiqi2, Tahir Ahmad1, Rafiq Ahmad1
of Metallurgy and Materials Engineering, CEET, Punjab University, Lahore, Pakistan
2IRCBM, COMSATS, Lahore
Synthesis and characterization of Nano Hydroxyapatite powder for orthopedic and dentistry
application
S. A. Ali, W. Jamal, W. Khaliq, M. U. Manzoor
Department of Metallurgy and Materials Engineering, CEET, University of the Punjab, Lahore
Pakistan
AlTiN coating Deposition and Characterization on Stainless Steel Substrate by PVD Coating
Technique
Hamna, Hafsa Zafar, Nawal Ali, Umar Manzoor
Department of Metallurgy and Materials Engineering, CEET, University of the Punjab, Lahore
Pakistan
1Department
12:30
13:00
Hall C, Day 1, Technical Session 1
11:30 to 13:30
Chair: Dr. Kamran Abid & Dr. Azhar Naeem
Time
11:30
12:00
12:30
13:00
Title/Authors
A Comparative Analysis of Forward and Inverse Kinematics of Robotic Manipulator
Kamal Shahid
CEET, PU, Lahore
Spectrum sensing techniques in cognitive wireless sensor networks
Dr. Muhammad Tahir Mushtaq
(UMT, Lahore)
Estimation of Optical Attenuation under fog conditions from Visibility Data in Lahore , Pakistan
Sultan Mahmood Yasir, T Mushtaq , Muhammad Azhar Naeem
CEET, PU, Lahore
Artificial Intelligence Robot for Domestic and Industrial Purpose
Muhammad Usman Saleem1, Muhammad Saheer Sajid2, Muhammad Mohid3
Centre for Earth & Atmospheric Sciences, PU, Lahore
6|Page
Poster Presentations
Sr. #
1
2
3
4
5
6
7
8
9
10
Hall A, Day 2,
Title/Authors
Study of different parameters effecting absorption of carbon dioxide in a packed bed gas
absorption column
Sharjeel Waqas, Muhammad Nawaz, Muhammad Usman Tahir
University of Gujrat
Review of Gears Failure Modes
Fayyaz Fayyaz
PIEAS, Islamabad
Optimal clarification of apple juice using crossflow microfiltration without enzymatic pretreatment under different operation modes
Fawad khan
UET, Peshawar
Numerical Study of Natural Convection Heat Transfer in a Vertical Annular Cavity
Imama Zaidi, shazia manzoor
PAEC, Islamabad
Efficacy of organic amendment in soil to overcome the heavy metal stress for plant in soil
Sundus Akhtar
IAGS, University of the Punjab,Lahore
Trichoderma harzianum: Bio-control agent against metal toxicity for wheat plant
Muhammad Jarrar Ahmed
IAGS, University of the Punjab, Lahore
Particulate Matter Levels in Lahore City: Measurement and Modeling
Waqas Majeed, Mahmood Saleem
ICET, University of the Punjab, Lahore
Effect of Starting Microstructure, Coarse Ferrite-pearlite, Fine Ferrite-pearlite, Bainite and
Martensite of AISI 4340 and 4140 steels on Corrosion Properties
A. Inam, M.T.Z. Butt, M. Ishtiaq, M. Naeem, M. Sohail and M. Sikandar Lodhi
Department of Metallurgy and Materials Engineering,
University of the Punjab, Lahore
Effect of Surface Roughness Profile of Mild Steel Substrate Upon the Adhesion Strength of
WC- 11%Co Flame Spray Coating
M. H. Hassan1, M. U. Shahid1, A. Salam1 and A. Inam2
1 Institute of Quality and Technology Management
2
Department of Metallurgy and Materials Engineering,
University of the Punjab, Lahore
Chloride-induced-corrosion of steel bars embedded in concrete: A review
Anwar Khitab
(Mirpur University of S & T)
Closing and Certificates Distribution
16:30 Hours