CHOiCE Client Installation Manual Version 1.1.3
Windows
CHOiCE Client
Installation
Manual
Version 1.1.3
1
CHOiCE Client Installation Manual Version 1.1.3
Table of Content
CHOICE CLIENT INSTALLATION IN WINDOWS ENVIRONMENT
3
INSTALLATION OF WINDOWS
3
INSTALLATION OF CHOICE CLIENT
3
CHOICE CLIENT CONFIGURATION - INSTRUCTIONS
4
CHECK LIST - WINDOWS CHOICE CLIENT INSTALLATION
7
2
CHOiCE Client Installation Manual Version 1.1.3
CHOiCE Client Installation in Windows Environment
Installation of Windows
Note:
 Assuming that you have already cleaned (i.e. formatted), installed and configured (i.e. installed
required device drivers only) your windows operating system.
 Make sure that you have installed operating system on C:\ driver only (default location).
 Make sure that you haven’t installed any firewall or antivirus after installing windows.
If USB Token users are using Mozilla Firefox9.0. then they should
keep all citizen annexures inside “C:\choiceclient\choiceAnnexure”,
which are to upload for different services.
Installation of CHOiCE Client
1.Insert CHOiCE Client CD into your CD-ROM.
2.Open CD-Rom Drive from My Computer.
3.Go to CHOiCE_Client > Windows directory
3.1 Installation with Gem Alto USB Token and Smart Card
To install CHOiCE Client double click on setup_Choice_Client.bat and follow the given instruction.
(Note: Please do read all readme.txt files appearing on your monitor while installation to avoid any
inconsistency.)
3
CHOiCE Client Installation Manual Version 1.1.3
CHOiCE Client Configuration - Instructions
Windows Environment:
1. Plug in USB Token/Smart Card Reader & Biometrika Device in the USB port.
2. Copy “choice_client_Windows” in D drive.
3. Execute setup_Choice_Client.bat file
4. Accept default setting (Yes/Agree/Continue/Next etc...)
5. Firefox9 and Netsacpe7.2 installation will take place.
Test Java installation:
Start Netscape  Tools Menu  Web Development 
JavaScript Console & Java Console should be enabled.
Start Internet Explorer  Tools Menu  Manage Add-ons 
Java Console should be enabled.
Test Hindi Font:
Browse www.choice.gov.in or http://test.choice.gov.in using Firefox web browser.
4
CHOiCE Client Installation Manual Version 1.1.3
Here hindi text should display properly, if not copy “Hinbmith1.ttf” font from D:\
choice_client_usbtoken_Windows\font directory and paste into C:\windows\fonts directory
or install hindi font using Control Panel > Fonts > File Menu > Install New Fonts ...
Test USB Token Installation:
If light is blinking, if you put USB token in USB port. User can see the USB Token properties by
two methods….
1.Go to StartAll ProgramsGem AltoClassic ClientClassic Client Tool box
2.Double click on the icon in system tray Classic Client Tool box will open.
Test Smart Card Installation:
If light is blinking even after inserting smart card into reader, that means the driver is not
installed properly or it is corrupted (i.e. smart card light should be continuously on while
reading smart card, blinking of light after inserting smart card into reader means driver is not
installed properly).
Biometrika Installation:
1.Follow new hardware wizard
2. Choose installation from specific location & ask this time only. Browse—D:/CHOiCE Client
Setup 2009_WindowsBiometrika FX DriversUSBENG folder.
3. Click next.
Testing:
1. Open control panel FX2000 (Usb)
/ Biometrika Diagnostic Tool
2. Click on initialize button.
3. Reset Biometrika, by pressing reset button bottom of Biometrika.
4. Click on test & put finger on scanner.
5. Finger print preview in new window should be shown.
5
CHOiCE Client Installation Manual Version 1.1.3
CHOiCE Client Installation For Windows 7 ,32 bit :1) After Successful execution of “setup_GemAltoTwinUSBToken.bat”, go to “BiometricaDrivers”> “biometrica” -> Copy all the files present in the folder and paste it in C Drive -> Windows ->
System32.
2)Then go to “BiometricaDrivers”-> “Driver” -> Leave “Utility” and “biometrika” and copy rest all
of the files and paste it in C Drive -> Windows -> System32.
3)Then go to “font” -> “Hinbmith1” copy this font and paste it in C Drive -> Windows -> Fonts.
4) Then go to “java” and copy 3 files “ext” , ”security”, “endorsed” and paste it in C Drive ->
Program Files -> Java -> jre7 -> lib. Total size of 3 files is 15.8mb.
5) Then go to “smartcard” and copy “javax.comm.properties”, “jpcsc.dll”, “OCFPCSC1.DLL”,
“opencard.properties”, “win32com.dll” and paste it in C Drive -> Windows -> System32.
6) Then go to “usbtoken” and copy 2 dll files “gclib”, “pkcs11wrapper” and paste it in C Drive ->
Windows -> System32.
7) Then once again go to “usbtoken” and copy 2 dll files “gclib”, “pkcs11wrapper” and paste it in
C Drive -> Program Files -> Java -> jre7 -> bin.
Removing Choice Installation from client machine:
1. Remove all Java software from Add/Remove program.
2. Uninstall Firefox 9.0, Netscape 7.2, Viewpoint media player, Smart Card & Gem Alto USB
Token.
3. Open D:/ choice_client_Windows execute
remove.bat
4. Stop services of USB Token and Smart Card from Control Panel  Administrative Tool 
Services.
5. Run Cleanup Utilities software to delete all junk files.
6
CHOiCE Client Installation Manual Version 1.1.3
Check List - Windows CHOiCE Client Installation
Following are the 7 easy steps to check your CHOiCE Client Installation:
1. Window Operating System Installation
2. Firefox Installation
Firefox Configuration (schema, java plug-in etc...)
3. Netscape Installation
Netscape Configuration (schema, java plug-in etc...)
4. Hindi font Installation
Tested with Internet Explorer and Firefox browser using CHOiCE URL
(www.choice.gov.in or http://test.choice.gov.in)
7
CHOiCE Client Installation Manual Version 1.1.3
5. JRE Installation
Plug-in configuration for Firefox Browser (Tools>
Internet Options>Programs>Manage Add-ons> Java Plug-in 1.7.0_03 is enabled.)
Go To Control Panel > Java Right Click Open > Java > View > User
Enable Platform 1.7
Go To Control Panel > Java Right Click Open > Java > View > System
Enable Platform 1.7
6. Biometrika Installation
Tested with GUI Tool (Start>Control Panel> fx2000)
7. USB Token Installation
Tested with CHOiCE Admin URL > ADD User Section
8. Smart Card Installation
Tested with CHOiCE Admin URL > ADD User Section
9. CHOiCE Client Installation
Tested with CHOiCE URL > Proper label is coming
Tested with CHOiCE Service > Properly Working
8