AUTOMOBILE DIRECTORY
An initiative from AWEX – CENTRE OF MONS
Rue du Chapitre 1
B - 7000 MONS
Tel: 32-(0)65316378 - Email: b.allard@awex.be - Website: www.awex.be
January 2013
TABLE OF CONTENTS
MANUFACTURING / TRANSFORMATION
1) Metal
2) Plastic
3) Composite
4) Textile
5) Specific items
6) Measuring / Control instruments
7) Electrical equipment / Navigation
VEHICLES EQUIPMENT - TRANSFORMATION - CUSTOMIZATION
1) Professional
2) Individual customer
RECONDITIONING / PREPARATION
COATING
1) Metal items
2) Paintings - Coating
3) Oils and lubricants
4) Adhesive
IT
UNIVERSITY
WASTE TREATMENT
MANUFACTURING / TRANSFORMATION
1) Metal
ARCELOR MITTAL
BRITTE MUSTAD
CAPAUL
CELEAH GROUP
DASCOTTE
DECOPREC
DRADIN V. & FILS
ELOY & BECKER
FILAME BRUSSELS
HEWA
JTEKT TORSEN EUROPE
MECANIQUE RESSORT BELGIUM
MEISTER COORDINATION CENTER
NEW ABRACO SERVICES
PEGARD PRODUCTICS
POLMANS
PRECIMETAL PRECISION CASTINGS
PRECISION LIEGEOISE
PRODUCT ENGINEERING SERVICES
REFRICAR
RESSORTS RENSON
R.TEC RACING TRADING ENGINEERING AND CONSULT
SETTAS (DONCASTERS)
SHUR-LOK INTERNATIONAL
TAILORED BLANK LIEGE (ARCELOR MITTAL GROUP)
TECHNOVAL
TECNOLON WORKS
THISE
TI GROUP AUTOMOTIVE SYSTEMS
VANHULEN HIGH PRECISION SPRINGS
VANWERS (ATELIERS FERNAND)
WOIT
2) Plastic
CO-JOINT
ECOPLAST TECHNOLOGY
ELOY & BECKER
FERONYL
GAMMA-WOPLA
IPIC PLASTIC
POLYONE
PRECICAL
PROCOPLAST
SERVIPLAST
SIMONIS PLASTIC
VANHULEN HIGH PRECISION SPRINGS
3) Composite
AGC GLASS EUROPE
ALKAR TECHNOLOGY
ARMACELL BENELUX
BODAIR
DAYCO SACIC
DIMMA DESIGN
ELOY & BECKER
FERONYL
GILLET VERTIGO
GRANDO
ISOMATEX
LAZZERINI
NANOCYL
NGK CERAMICS EUROPE
PRECIS SELECT
RECTICEL
RIOGLASS BELGIUM
SAINT-GOBAIN GLASS BENELUX
SIMTECH
T&B CARBON MANUFACTURING
VANHULEN HIGH PRECISION SPRINGS
4) Textile
BELGIAN FIBERS MANUFACTURING
PROCOTEX
SOCIETE COMINOISE DE MAILLE INDUSTRIELLE (SOCOMAILLE)
TREVIRA BELGIUM
5) Specific items
APPLUGS
BLICQUY (LES ATELIERS DE)
CARLOR ENGINEERING
CERSA
CETEOR
CO-JOINT
DELTRIAN INTERNATIONAL
EURO-LOCKS
FEDERAL - MOGUL
ICOR
IDEATEC
LECLERCQ ETS
MANTHYDRO
NEXANS BENELUX
RACING TRADING ENGINEERING AND CONSULT
REFRICAR
SIMA
WARNY & CIE
6) Measuring / Control instruments
BREUER TECHNICAL DEVELOPMENT BTD
DSI DELTA SERVICES INDUSTRIELS
ELCOMETER
EUTOMATION & SCANSYS
G-TECH2
HUBITOOLS
IDEATEC
LASEA
LASERCO LASER COATING DIAMOND TECHNOLOGY
MICRONEXT
OPTRION
SKYNAM
SYREG
THERMIBEL
TRIPY
7) Electrical equipment / Navigation
AUTO ELECTRONICS
AW EUROPE
ELOY & BECKER
PHELECT
TRAXXEO
VALEO VISION BELGIQUE
VEHICLES EQUIPMENT - TRANSFORMATION - CUSTOMIZATION
1) Professional
AUTOGRAPHE
BODY-CONCEPT.BE
LASERCO LASER COATING DIAMOND TECHNOLOGY
MECELFIN
MOVENA
R.TEC RACING TRADING ENGINEERING AND CONSULT
VTC
2) Individual customer
911 (9 ONE ONE) MOTORSPORT
BEAUJEAN
BEAURAING STEPHANE - SBG CARCENTER
BREUER TECHNICAL DEVELOPMENT BTD
CARACTERE AUTOMOBILE
CARAT DUCHATELET
EXPRESSION
IMPERIA AUTOMOBILES
INNOVATIVE PRODUCTION
LISMONDE DANIEL - HIGH TECH
MONO BELGIUM CORPORATION
MORETTE
TUNING BOX
RECONDITIONING / PREPARATION
BELGIUM TRUCK TECHNOLOGY
BREUER TECHNICAL DEVELOPMENT BTD
CARDONE
EVOLVE POWERTRAINS
GEFCO
KRONOS
MATHONET MARCEL
MOSA FREIN
RECTILUX
SPEED-UP
COATING
1) Metal items
ADVANCED COATING
MATRIO GROUP
2) Paintings - coating
ARPADIS GROUP
LAMBIOTTE ET CIE
POLYONE
VALCOLOR
3) Oils and lubricants
ASTA TECHNOLOGIES BELGIUM
CANDICAR EUROPE
KLÜBER LUBRICATION
SADAPS BARDAHL ADDITIVES & LUBRICANTS
TECNOLUB
4) Adhesive
MACTAC EUROPE
IT
ACAPELA
AGESYS
BUREAU CONSEILS ET SERVICES
D-TECH ELECTRONIC
DYNATEK
EUTOMATION & SCANSYS
E-XSTREAM ENGINEERING
FREE FIELD TECHNOLOGIES FFT
GLOBAL DESIGN TECHNOLOGY - GDTECH
GREEN PROPULSION
MITRACOWALL
TRAXXEO
VISIO ING CONSULT
UNIVERSITY
UNIVERSITY OF LIEGE – LTAS – ENGINEERING AUTOMOTIVE RESEARCH GROUP
WASTE TREATMENT
ECO-DEC
RECYCAR
911 (9 ONE ONE) MOTORSPORT
Rue Alexandre-Louis Martin 19
7141 CARNIERES
Tel: 32-(0)64215270 - Mobile: 32-(0)496210050
Email: neufoneonemotorsport@hotmail.com - Web: http://911-motorsport.com
Contact person: Mr Dany LHOIR
9 ONE ONE MOTORSPORT is involved in modifying Porsches, from both the design and the
aesthetic point of view. The car can be changed from A to Z, including tyres, rims, kit,
headlights, tinted windows, upholstery, carpet, engine, sports exhaust, etc.
Tuning, Classic car repair, new paintwork
All kits are modular between models. They are made to order and are unique. All bodywork
is carried out, even the strangest, to give the car the desired look.
9 ONE ONE MOTORSPORT is always on the lookout for new kit ideas or new looks. It works in
several fields where it has a specialist in each field so that it can always find the best
solutions. Its specialists are located in different countries. Various materials are used such as
polyester and carbon.
An advert appears each month in RS Magazine, the magazine most read by Porsche
enthusiasts. A special report is also published at the end of each project.
Back to homepage
ACAPELA GROUP
Boulevard Dolez 33
7000 MONS
Tel: 32-(0)65374275 – Fax: 32-(0)65374276
Email: info@acapela-group.com - Web: www.acapela-group.com
Contact person: Mr Lars-Eric LARSSON
ACAPELA GROUP gives a voice to all your products and services. With perfect command of its
technologies, ACAPELA invents voice solutions to give speech to content and enrich user
interfaces in a natural and intuitive way.
Navigation, interactive voice response systems, accessibility solutions, e-learning, talking
Web and audio-books are amongst the first applications to have benefited from the
advantages of speech synthesis. Every day, new applications are popping up and broadening
the scope of possibilities.
A key player with 25 years of experience, ACAPELA provides specific and proven solutions
and offers its range of products, services and expertise in 25 languages and over 50 voices.
ACAPELA GROUP develops its own voice technology solutions employing a research team of
experienced engineers and numerous language technicians. The company can respond
quickly to languages not yet covered by our technology through a network of linguists.
Developments range from language processing, to the creation of speech corpora to signal
processing. Voice solutions have become a natural way of managing content and building a
quality, user-friendly interface that ensures maximum user enjoyment. Access tools, audio
content management, call centres and contact management, e-learning, edutainment,
interactive voice systems, language learning, navigation, on-line help, podcasts, productivity
tools, public address systems, robotics, SMS and MMS to voice, telematics, translation tools,
unified communication, warehouse management, reading Web pages, etc. are part of the
long list of applications and services that take advantage of the benefits of voice solutions.
Customers in the car sector:
Over 10 years of activity in the automotive field have given the ACAPELA GROUP solid
experience and expertise in the automotive field and understanding its customers’ needs.
Over two million vehicles on the roads already use ACAPELA voices. ACAPELA’s multilingual
solutions have already been deployed throughout the world in 25 languages and over 50
voices to revolutionize drivers’ in-car experience. Take a look at our list of customers and
you will find many actors in the sector that already rely on our voice solutions.
Partners and customers:
Asahi Kasei, BMW, Bosch Blaupunkt, Citroën, Comroad, Daimler Chrysler, Harman Becker,
Magneti Marelli, Mp3Car, Navteq, OKI, PSA, Renesas, Siemens VDO, Tata, TeleAtlas, Telion,
Temic, Ulyces, Volkswagen, Yasssu.
Back to homepage
ADVANCED COATING
Rue de l'Avouerie 7
4000 LIÈGE
Tel: 32-(0)42545011 – Fax: 32-(0)42545010
Email: info@advanced-coating.com - Web: www.advanced-coating.com
Contact person: Mr Jean-Pierre JANSSEN
ADVANCED COATING designs, develops and applies arc, cold, plasma and supersonic
spraying of metals, alloys, ceramics and carbides.
It is also a specialist in flat and cylindrical surface grinding as well as super finishing of parts.
ADVANCED COATING also commercialises and ensures the after-sales service of exclusive
measuring systems: Penetrascope ® and Rollprof ® and Alpaga 500 Nano ®.
Back to homepage
AGC GLASS EUROPE
Chaussée de la Hulpe 166
1170 BRUXELLES
Tel: 32-(0)26743111 – Fax: 32-(0)26724462
Email: kathy.meurant@eu.agc.com - Web: www.agc-glass.eu
Contact person: Mrs Kathy MEURANT
Based in Brussels, AGC GLASS EUROPE produces, processes and distributes flat glass for the
construction industry (external glazing and indoor decorative glass), the automotive
industry, the solar industry, and specialist industries. It is the European branch of AGC
GLASS, the world's largest producer of flat glass.
Its baseline "Glass Unlimited" reflects the possibilities offered by:





glass as a material to meet a growing variety of needs (comfort, energy control,
health & safety, aesthetics);
innovation in products and processes, derived from sustained research in advanced
glass technology;
industrial facilities comprising 18 float plants, 6 automotive glass plants and more
than 100 processing and distribution units throughout Europe, from Spain to Russia;
a worldwide marketing network;
the resources of its personnel motivated by operational excellence and innovation.
Go to http://www.agc-automotive.com/ for a comprehensive range of automotive glazing:
windshields, sidelights, backlights, panoramic sunroofs. With advanced features: heated
windshields, infrared and UV protection, head-up displays …
AGC Automotive mainly produces and sells automotive glass for new vehicles and
aftermarket replacement glass, and has top global market share with the new vehicle
market. With activities in Japan-Asia, Europe, and North America, AGC Automotive operates
in a multi-cultural environment with employees from all over the world. Through a globally
integrated management system, the head office in Tokyo, operations in Japan Asia, Europe,
& North America, and the ARG (Automotive Replacement Glass) sector work in unison to
support customers’ activities and meet their needs in the areas of development, production
and, sales in the ever-evolving global automotive industry.
Back to homepage
AGESYS
Rue du Roton 57
6240 FARCIENNES
Tel: 32-(0)71390768 – Fax: 32-(0)71391003
Email: agesys@skynet.be - Web: http://users.skynet.be/agesys
Contact person: Mr Philippe BECKERS
• Industrial automation consultancy and producer
• Design and production of electrical boxes and controllers
• Programming of programmable robots (Siemens, Télémécanique, Omron, Hitachi)
• Process supervision (Axeda Wizcon, Siemens-Winncc)
• Installation of remote management systems (Tbox)
• Development of programmes for programmable robots
Main customer
Automotive sector: Volkswagen
Back to homepage
ALKAR TECHNOLOGY
Rue des Pastures 95
7130 BINCHE
Tel: 32-(0)64652082 - Fax: 32-(0)64341103 - Mobile: 32-(0)475624890
Email: alki@belgacom.net – Web: www.alkartechnology.com
Contact person: Mr Alain KINARD
StruXell is an innovative structural composite core material developed to meet demanding
architectural and structural applications.
Thanks to the huge variety of raw materials that can be processed, StruXell can be used in
any application where weight, strength, durability and design are the major constraints.
Ideally built around the hexagonal honeycomb structure, StruXell provides high mechanical
properties that merge with a design that is aimed to enhance the appearance of rough
structures.
Currently made of polyester resin reinforced with continuous strand mat, StruXell can also
be made of biaxial carbon fiber and epoxy resin.
Back to homepage
APPLUGS
Rue de la Culée 9 C
5580 ROCHEFORT
Mobile: 32-(0)479743773
Email: info@applugs.com – Web: www.applugs.com
Contact person: Mr Pierre-André PUGET
APPLUGS is the builder of charging stations for electric vehicle two and four wheels
reference.
APPLUGS has a single purpose: building charging stations most consensual and functional as
possible to satisfy all the users of a tool for electric mobility.
APPLUGS working 100 % for electric mobility
Our produce are developed and designed for the European market.
They are modular and scalable.
And most importantly, they will please you
Back to homepage
ARCELORMITTAL LIEGE
Rue de la Digue 22
4400 FLEMALLE
Tel: 32-(0)42361111 - Fax: 32-(0)42362975
Email: infoliege@arcelormittal.com - Web: www.arcelormittal.com
Contact person: Mr Marc THEUNISSEN
Automotive
ARCELORMITTAL supports car manufacturers through the different stages of a vehicle’s
lifecycle. ARCELORMITTAL is a technology leader in advanced high-strength, galvanised and
coated steels – products that are used in the manufacturing of cars, vans and trucks.
About one fifth of the global car production is made from ARCELORMITTAL steel, and we
have an industrial presence in 22 countries spanning four continents.
In 2010 ARCELORMITTAL’s automotive division generated US$12.3bn in revenues and
delivered 13.5 million tonnes of flat steel. We have a global reach, with a presence in South
Africa, Europe, North America and Latin America. We are also present in India, Turkey and
China via joint ventures and in Japan via an alliance with NSC.
With a global presence in steel production and a network of 11 research centres, we aim to
support our clients through different production stages, from a vehicle’s design phase
through to mass production and after-sales service. More than half of our investment in
product research and development (R&D) is allocated to the automotive industry, and we
have five laboratories that are dedicated fully or partly to R&D for the automotive market, in
East Chicago in the US, Hamilton in Canada, and Maizières, Montataire and Gandrange in
France. Our R&D engineers work with carmakers throughout the lifecycle of their products
to develop automotive steels that are stronger yet lighter than existing materials. We also
develop new, cost-effective coatings to improve corrosion resistance, paint appearance and
application processes.
Our presence in different regions also gives us valuable insight into new market trends. For
example, ARCELORMITTAL provides steel solutions for low-cost cars and engine powertrains
to meet changing customer and market needs.
Our automotive steel solutions cover all metallurgical ‘families’ of steels – distinguished by
their different properties and compositions.
We anticipate that regulatory and customer expectations for lightweight cars will rise in the
future. Working closely with our automotive partners, we have developed S-in motion, a set
of automotive steel solutions to make cars lighter – without compromising safety – and, in
turn, reduce their carbon emissions.
With our current catalogue of automotive products, we support carmakers in optimising
weight and cost, while reducing carbon emissions and, crucially, ensuring that stringent
safety standards are met.
ARCELORMITTAL also has a specialized business unit for tailored blanks – a manufacturing
technology that improves the performance of car parts in a vehicle.
These tailored blanks, also called laser-welded blanks, are made by welding together flat
steel sheets of different thicknesses, grades and coatings. These products offer an optimal
combination of strength and ductility. They also reduce the weight of vehicles and improve
safety by enhancing crash performance. And we are a leading producer of laser-welded
blanks, which also reduce the cost of vehicles.
Back to homepage
ARMACELL BENELUX
Zoning Industriel Les Plénesses - Rue des Trois Entités 9
4890 THIMISTER-CLERMONT
Tel: 32-(0)87325070 - Fax: 32-(0)87325071
Email: bart.janssen@armacell.com - Web: www.armacell-core-foams.com
Contact person: Mr Bart JANSSEN
ARMACELL is a global innovator in foam technologies and the world leader in the market for
flexible technical insulation materials.
Apart from ARMAFLEX, the leading brand in the field of flexible technical insulation, we
produce thermoplastic insulation materials, covering systems, fire protection and noise
control products, special foams for a multitude of industrial applications and foam cores
which are used as composite materials.
Composites provide lightweight solutions for railway vehicles saving around 50 % of the
weight compared with traditional metal components. Lower overall weight translates into
less stress, faster acceleration and higher speeds, as well as reduced starting and stopping
inertia. Fire, smoke, and toxic fume (FST) are key safety criteria for interior components of
passenger railway carriages even more so when trains operate in tunnels or underground, or
without a crew.
Train body l Interior panelling in train’s l Buses l Trucks l Cars and camping trailers
Back to homepage
ARPADIS GROUP
Zoning Industriel - Zone D - Rue Jean Perrin 5A
7170 MANAGE
Tel: 32-(0)64517613 - Fax: 32-(0)64517614
Email: info@arpadis.com - Web: www.arpadis.com
Contact person: Mr Etienne WALRAVENS
The ARPADIS GROUP business consists of producing coatings and polymers for third parties.
Increasingly, customers’ requirements have extended to the field of services, leading
ARPADIS to develop an industrial custom processing. Custom processing consists of
processing products for the account of the customer. It may involve repackaging or reassembly and synthesis of chemical products, on the basis of technology provided by the
customer, and using raw materials provided by the customer or provided by ARPADIS.
Back to homepage
ASTA TECHNOLOGIES BELGIUM
Place de Bronckart 7
4000 LIEGE
Tel: 32-(0)42206600 - Fax: 32-(0)42370048
Email: administration@asta3000.com - Web: www.asta3000.com
Contact person: Mr Sofiane NENACH
With a single application, ASTA 3000 cleans and protects the whole engine by eliminating
carbon deposits and by limiting further clogging which are the main cause of the engine
wear and its decrease of performance.
ASTA 3000 segregates carbonized oil deposits during combustion and evacuates them during
the exhaust phase. The valves and the combustion chamber are thus cleaned, restoring an
optimal output level to the engine.
ASTA 3000 treats the surfaces with a friction modifier, that sticks the more easily as the
temperature of friction areas is higher.
The non-stick coating of ASTA 3000 limits the return of carbon deposits, particularly in the
bottom of the fire ring’s groove. This latter can smoothly retract in its housing, limiting
friction and improving the combustion chamber’s seal.
Back to homepage
AUTO ELECTRONICS
Chaussée de Bruxelles 29 D
7061 CASTEAU
Tel: 32(0)65334862 - Fax: 32(0)65730070 - Mobile: 32-(0)498517913
Email: autoelectronics@skynet.be - Web: www.autoelectronics.be
Contact person: Mr Luigi DONNIACUO
The company has developed an electronic chip, called Eprom, intended to be installed on
diesel engines and/or essence of all brand cars manufactured after 1986. This chip replaces
the original chip and contains a new ignition curve and a new injection program.
Back to homepage
AUTOGRAPHE
Avenue Lavoisier 2
1300 WAVRE
Tel: 32(0)10476585 - Fax: 32(0)10476595
Email: info@autographe.be - Web: www.autographe.be
Contact person: Mr Mathieu de SAINT HUBERT
AUTOGRAPHE is the market leader in the fitting-out of commercial vehicles and emergency
services vehicles in Belgium. Since 1975 the company has offered the entire infrastructure
needed for standard vehicles to be converted into professional vehicles in all kinds of
sectors.
AUTOGRAPHE is chiefly active in the following market segments:






Fire fighting vehicles
Police vehicles
Medical vehicles and ambulances
Special vehicles
Vehicles for the transport of persons with reduced mobility and minibuses
Workshop and commercial vehicles.
Back to homepage
AW EUROPE
Avenue de l'Industrie 19
1420 BRAINE-L'ALLEUD
Tel: 32-(0)23891200 – Fax: 32-(0)23891210
Email: info@aweurope.be - Web: www.aweurope.be
Contact person: Mr Michel KNOP
AW Europe is a world leader among specialist suppliers of automatic gear boxes and car
navigation systems (GPS).
We operate from two sites in Belgium: Mons (production, logistics) and Braine-l’Alleud (R&D
and administration).
Control software for automatic gearboxes, vehicle navigation (GPS) software and vehicle
navigation systems.
Automatic gearboxes (dynamometer test benches)
Main references:
Toyota, Volvo, Saab, Opel, Renault, Fiat, Volkswagen, Audi, Porsche, PSA, Ford, Land Rover,
Jaguar, Vauxhall, BMW, Lamborghini, Alpine, Grundig.
Back to homepage
BEAUJEAN
Chaussée d'Anton 50
5300 ANDENNE
Tel: 32-(0)85842290 – Fax: 32-(0)85842298 - Mobile : 32-(0)497418494
Email: beaujean.b@skynet.be - Web: www.beaujeanconcept.be
Contact person: Mr Benoît BEAUJEAN
Car interior design
Since 1990, the House BEAUJEAN was imperative in the very closed European circle by the
arrangements of automobile inside.
We propose our services to the interior designers of the restoration of cars, to the collectors
and to the private individuals. We dress dashboards, central consoles, wood panels from the
most beautiful wooden magnifying glasses (walnut, elm, amboine, lemon tree, maple). The
set can be even enhanced by a net of marquetry of box tree, sycamore or by a white charm





We realize whole parts as knobs of gear, steering wheels or working tablets
We oversee the work of saddlery and some leather to famous Belgian craftsmen,
certified by the house
We create and produce exclusively small series or complete kits for leading
importers, coachbuilders, interior designers specialized in the restoration of car and
independent garage owners
We fit out people-carrier vehicles "mobile offices" having all the modern technology:
from the WiMax to the satellite fax, from the refrigerator to the mobile Coach
Cinema.
We also apply these techniques to the internal dressing of sailboats, yachts and
planes as well as the woodwork of armorer's.
Back to homepage
BEAURAING STEPHANE - SBG CARCENTER
Rue des Anciens Combattants 1
5032 MAZY
Tel: 32-(0)81738087 - Fax: 32-(0)81738075
Email: info@sbgcarcenter.com - Web: www.sbgcarcenter.com
Contact person: Mr Eric CHARLIER
Situated between Namur and Gembloux and strong of an experience of more than ten years,
the SPRL BEAURAING specialized in the equipment of vehicles in the LPG and also in the
adaptation of vehicles for people with reduced mobility.
Our know-how and our experience in the field of the LPG make of the SPRL BEAURAING the
only center of assembly in province of Namur approved by the car manufacturers.
We also propose you a vast choice of adaptations of vehicles for people with reduced
mobility:



Systems of driving of the last generation
Numerous systems of help to the transfer and to the load
But also adaptations for the collective transport.
Back to homepage
BELGIAN FIBERS MANUFACTURING
Boulevard Industriel 91
7700 MOUSCRON
Tel: 32-(0)56856800 – Fax: 32-(0)56344276
Email: info@belgianfibers.be - Web: www.belgianfibers.be
Contact person: Mr Patrick BUSSCHAERT
BELGIAN FIBERS MANUFACTURING is one of the mayor independent Polyolefin fibre
producers in the world. For 2013 we expect production of about 24 000 tons. Flexibility and
efficiency are essential to meet the needs of our customers. The fully equipped laboratory
monitors the quality of our products. For a greater customer confidence BELGIAN FIBERS
MANUFACTURING produces and sells under the ISO-9001.
Automotive
The polypropylene fibers are extruded to the specifications of the customer. Our fibers are
incorporated in parts built-in into the major automobile models. Such as:







Audi
BMW
Mercedes
PSA Group
Seat
Skoda
Volkswagen
Through close cooperation with R&D departments of our customers we developed shrinkfree fiber, heat stabilized fiber, mixed cut lengths for ideal processing, use of different spin
finish, etc.
Back to homepage
BELGIUM TRUCK TECHNOLOGY
Rue des Eperviers 1
4040 HERSTAL
Tel: 32-(0)042636081 – Fax: 32-(0)42637728
Email: info@belgiumtt.com - Web: www.belgiumtt.com
Contact person: Mr Benjamin JOHSON
BELGIUM TRUCK TECHNOLOGY is one of the major and most experienced independent brake
caliper remanufacturer in Europe. Every member of our team has unique expertise acquired
over years of experience.
Quality, flexibility and service are our leitmotivs. Our highly skilled team is everyday available
to answer any technical, logistical or commercial questions you may have. With production
offices, we have clear visibility on workshop production and are able to inform about
delivery time in real time.
BELGIUM TRUCK TECHNOLOGY today sells to more than 45 countries and every day explores
new remanufacturing possibilities and repair kits for aftermarket.
We stock a massive range of heavy duty Meritor, Knorr-Bremse, Wabco brake calipers and
repair kits which allow us to offer a very competitive same day R/R (repair and return)
service over the whole Benelux and other bordering countries (France, Holland, Luxemburg,
Spain).
Back to homepage
BLICQUY (LES ATELIERS DE)
Rue du Couvent 38
7903 BLICQUY
Tel: 32-(0)69669690 – Fax: 32-(0)69669699
Email: direction@adblicquy.be - Web: www.adblicquy.be
Contact person: Mr Francis LORENZONETTO
Engineering and electrical sub-contracting, assembly of optical headlights, mechanical
welding (trolleys)
Research and development
Mechanical and electrical assembly, plastics, by machine or manually, metal construction,
mechanical welding and sheet metal work.
Back to homepage
BODAIR
Rue Al'Fosse 7
4681 OUPEYE
Tel: 32-(0)42269128 - Mobile: 32-(0)473450616
Email: info@bodair.com - Web: www.bodair.com
Contact person: Mr Benoit BOVEROUX
BODAIR is active in the development, the design and the production of carbon fiber rods.
• As a result of the R&D conducted by BODAIR, new technologies in carbon fiber rods are
emerging.
• BODAIR is eager to offer high quality rods and advanced designs allowing significant weight
reduction that largely exceed the current designs & performance of aluminum and/or
stainless steel rods.
• Thanks to the combination of a completely new manufacturing process with a new carbon
fiber design, BODAIR has acquired a unique competitive advantage over traditional rod
technology & design.
Back to homepage
BODY-CONCEPT.BE
Rue de Douvrain 13
7011 GHLIN
Tel: 32-(0)65312280 – Fax: 32-(0)65312406 – Mobile: 32-(0)475284663
Email: f.ballez@body-concept.be - Web: http://body-concept.be
Contact person: Mr François BALLEZ
Filling-out of commercial vehicles - Industrial coach building
Coach building model
Brand
Ladder carrier construction
Ballez patent
Home-made
Fitting-out of workshop vehicles
Home-made
Prefabricated furniture
Special vehicles: Librarybus, medical care vehicles, PROCAR
technical vehicles…
Police and intervention vehicles
Repairing trailers and equipment
Tipper and tri-tipper for 3.5 to 32 tons
Home-made
Home-made, CEV
Cabreta
Back to homepage
BREUER TECHNICAL DEVELOPMENT BTD
Avenue de Norvège 6
4960 MALMEDY
Tel: 32-(0)80791550 – Fax: 32-(0)80791569
Email: info@btd.be - Web: www.btd.be
Contact person: Mr Ernst BREUER
Realizing engine visions
Modern and innovative engine technology: automobile sector
BREUER TECHNICAL DEVELOPMENT (BTD) is a development partner for single components,
engine subassemblies and alternative powertrains as well as complete, high-performance
and series-production engines.
From initial design development and mechanical
construction right through to testing and measurement for the highest requirements
(including motor racing and research projects).
We develop prototypes and components from A to Z, or, if required by the customer, will
provide targeted support in different phases of the development process.
One of the company’s key areas of expertise is the development of complete turbocharger
systems and single components such as turbine or compressor wheels, turbine scrolls and
compressor housings, from single prototypes to low-volume production. With the new
state-of-the-art turbocharger balancing equipment, BTD can now complete the process of
the moving parts of turbochargers. The new equipment even allows ball-bearing
turbochargers and components made of alternative materials to be balanced. BTD can help
to fulfil the highest standards in meeting the rising demand for turbocharged engines.
Main customers:


Volkswagen AG (Wolfsburg, Germany)
Audi AG (Germany)
Back to homepage
BRITTE MUSTAD
Rue de Cheratte 27
4683 VIVEGNIS (OUPEYE)
Tel: 32-(0)42569069 - Fax: 32-(0)42640863
Email: info@britte.be - Web: www.britte.be / www.mustad.be
Contact person: Mr Giovanni SANNA
Multi-technologies for multiple applications
Assembly, Automation, Engineering, Interconnection technologies, Machining, Measuring
instruments, Metrology, Microelectronic packaging, Nanotechnologies, Plastics technology,
Processing, Stamping, Tools, Turning…
... for markets with high technological value
Aeronautics - space, Automotive, Biomedical - Medical, Data-Processing, Electromechanical,
Equipment, Luxury goods, Microelectronics, Nuclear industry, Railway, Telecommunications
MUSTAD, precision screw-cutting and machining since 1948
MUSTAD BELGIUM belongs to the mechanical division of family group MUSTAD
INTERNATIONAL GROUP founded in Norway in 1832.
Rather than concerns linked to short-term share price and profit targets, the main goal of
our company, which is not a quoted company, is to ensure its continuity in time:



Through solid growth based on real technological know-how at the service of quality and
productivity.
Through reasonable long-term profit targets.
By positioning itself as a veritable partner for its customers by providing expertise over
nearly sixty years of machining existence.
Mission
To machine precision mechanical components and assemblies for the whole of the industrial
sector and in all materials, providing high added value in terms of technology,
competitiveness of price and service. Screw-cutting and machining on CNC production
centres constitute our basic tasks.
Back to homepage
BUREAU CONSEILS ET SERVICES
Rue Folle France 8
1325 CHAUMONT-GISTOUX
Tel: 32-(0)10687290 - Fax: 32-(0)10687299
Email: bcs@aqmanager.com - Web: http://aqmanager.com
Contact person: Mr Jean-Pierre RAVEZ
We are present on the market of the GMAO and the LIMS for more than 20 years.
Our teams of engineers possess a big knowledge of the ground, as well as an excellent
expertise of the problems of the business world. This peculiarity makes our strength,
because she allows us to propose software always friendly and particularly adapted to the
needs of our thousand users.
We are a family company possessing an unchanged shareholding for more than 20 years.
This stability allows a big coherence, as well as continuity in the development of our activity
and our products.
We know profitability and a positive growth of our activity for several years. This profitability
allows us to invest permanently in the development of innovative solutions, such our
application Web AQ manager full house.
Back to homepage
CANDICAR EUROPE
Parc Industriel 14
5640 METTET
Tel: 32-(0)71726097 - Fax: 32-(0)71726096
Email: daniel.nicoletti@candicar.be - Web: www.candicar.be
Contact person: Mr Daniel NICOLETTI
Products of cleaning and automobile maintenance
Deodorizing car
Grease remover metallic parts
Back to homepage
CAPAUL
Industriestrasse 39
4700 EUPEN
Tel: 32-(0)87595560 - Fax: 32-(0)87740468
Email: info@capaul.be - Website: www.capaul.be
Contact person: Mr Ludwig HENKES
For more than 140 years CAPAUL has been perfecting faultless machining of mechanical
components for aeronautics, medicine, the textile industry, the car industry, the railways,
the petrochemical industry, the manufacture of compressors and of armatures and in many
other fields.
Our high technology production plants turn, mill, grind, erode and control your pieces
according to specifications (CAD systems, plant with total CNC, air-conditioned
measurement compartment).
In order to provide the full service to our customers, we also offer the complete integration
of mechanical subassemblies (study, welding, machining, assembly and control).
CAPAUL technicians closely collaborate with our customers’ design offices. This interactive
development enables us to offer our customers our know-how and industrial advice with a
view to obtaining a perfect product under the best terms as regards quality, service and
price.
The required quality is verified and certified by a highly qualified team. Our production is
monitored in accordance with the ISO 9001/2000 + EN 9100/2003 norm.
CAPAUL places its experience, its perfect mastery of a range of techniques and its human
potential at the service of its customers.
Back to homepage
CARACTERE AUTOMOBILE
Parc Artisanal - Allée de Wésomont 3
4190 WERBOMONT
Tel: 32-(0)86430000 – Fax: 32-(0)86430001
Email: info@caractere.com - Web: www.caractere.com
Contact person: Mr Alain HURARD
CARACTERE AUTOMOBILE is a Belgian company specialized in the design of car accessories
for Volkswagen and Audi vehicles.
The line of products offered by CARACTERE for these brands ranges from body styling kits
and wheel rims to sport exhausts, power add-on units and interior styling accessories.
Alain HURARD, the founder of the company and a designer by training, has been developing
and marketing the products in the ‘Caractère’ range, with the help of his dynamic team,
since 1992, with the aim of blending performance, quality and design.
Today, CARACTERE is one of the world’s best known car customisation companies.
Back to homepage
CARAT DUCHATELET
Rue Winston Churchill 413
4020 LIEGE
Tel: 32-(0)43495562 – Fax: 32-(0)43495575 – Mobile: 32-(0)479850240
Email: info@caratsecurity.com - Web: www.caratsecurity.com
Contact person: Mr Michael GHYSE
The Carat Security Group, including our world renowned brands CARAT DUCHATELET and
Centigon, represents over 130 years of luxury coach building experience and comprehensive
mobile armored solutions for Heads of State, Cash-in-Transit, Off-road and Defense
applications, delivered around the globe from each of our seven production facilities.
CARAT DUCHATELET is a world leader in head of state and exclusive VIP armored limousines,
buses and SUVs including solutions based on Rolls Royce, Bentley, Maybach and Mercedes
Benz.
Centigon features world class, independently certified sedans, SUVs and cash in transit
vehicles designed for superior ballistic and blast protection both on and off road.
Carat Defense, a leader in nimble, well-protected defensive platforms for border protection,
riot control and reconnaissance missions worldwide including tactical and pursuit vehicles
Back to homepage
CARDONE
Parc Industriel - Rue Tout-y-Faut 91
7110 HOUDENG-GOEGNIES
Tel: 32-(0)64212335 – Fax: 32-(0)64238783
Email: info@cardone.com - Web: www.cardone.com
Contact person: Mr Peter CALO
CARDONE is the only remanufacturer in the world with long-standing expertise in
mechanical, hydraulic and electronic parts repair. Since late-model parts now blend these
disciplines, CARDONE has the advantage over other suppliers that specialize in only one
area.
We refer to “mechatronic” products as “C-Tec” parts, because CARDONE is often the only
supplier option apart from the O.E. dealer – at a much lower price.
CARDONE’s C-Tec offering












Electronic Power Steering Pumps
Electro-Hydraulic Power Steering
Electronic Rack and Pinion Units
Electronic Throttle Body Assemblies
Electronic Calipers
Hot-Film Mass Air Flow Sensors
Electric Smog Pumps
Electric Vacuum Pump
Interactive Vehicle Dynamic (IVD) Power Brake Boosters
ABS Systems
Controller Area Network (CAN) Window Lift Motors
Speed Sensitive Wiper Motors
At CARDONE, every employee is dedicated to providing the best automotive products,
availability and services.
Supporting CARDONE products

Rebuild & Return Service
o
o
o
If a particular part is unavailable, we can take the driver's worn part and
rebuild it to original form, fit and function.
R&R is a great option for classic/antique vehicle enthusiasts who want to
restore the original part from their vehicle back to when it was new.
Typical turnaround is the 3-5 days from the time we receive it; then we ship it
back.
Back to homepage
CARLOR ENGINEERING
Avenue Albert 1er 87
4030 GRIVEGNEE
Tel: 32-(0)43840197 – Fax: 32-(0)43671666
Email: info@carlor.com - Web: www.carlor.com
Contact person: Mr Fabian KLAURENS
CARLOR: the leader in the field of preheating systems!
CARLOR ENGINEERING is a Belgian manufacturer of:
-
Electric coolant heaters for all types of water-cooled engines
•
•
•
•
-
Hydraulic oil preheater
•
•
-
private cars, emergency vehicles, vehicles on construction site
vans, trucks, bus, civil engineering machineries
marine engine
generator sets
tanks
engines
Water preheating system
•
drinking bowls
Back to homepage
CELEAH GROUP
Rue de Beclines 19
1435 MONT SAINT GUIBERT
Tel: 32-(0)10650628 - Fax: 32-(0)10656188
Email: contact@celeahgroup.be – Web: www.celeahgroup.be
Contact person: Mr Eddy LENART
CELEAH GROUP was born from a combination of two companies: Mechanical Engineering
and Meca-Consult.
The one involved in the design of tools, special machine, control...
The other in the machine tool programming, operating range, training...
The products we offer are innovative. Complex trajectory programming, machining, robotics,
High Tech CAD software by direct modeling...
They are part of the evolution of machining today. Machines with many opportunities while
ensuring a limited budget.
Back to homepage
CERSA
Rue du Mont Gallois 54
7700 LUINGNE
Tel: 32-(0)56842100 - Fax: 32-(0)56345868
Email: info@cersa.be – Web: www.cersa.be
Contact person: Mr Freddy VANMEENEN
Created in 1990, CERSA concentrates on innovation and improvement of floor mounted and
overhead handling systems in collaboration with car manufacturers. Each conveyor system
presents specific characteristics of speed, load, noise, lubrication, environment… The
application of polymeric to conveying procures significant advantages. CERSA developments
give solutions to conveyors and especially in specific environment such as car bodies’
treatment, cataphoresis, water-test, waxline…
CERSA components have for main objectives:
To reduce:
The noise level
Systems weight
Maintenance costs
Or avoid lubrication
Systems wear
Investment costs
From conception to production, CERSA is able to help you to manage your projects. Our job
is to respond to your objectives and needs with the most suitable solution.
Back to homepage
CETEOR
Zone Industrielle - Rue de la Baronnerie 3
4920 HARZE
Tel: 32-(0)43882017 - Fax: 32-(0)43883192
Email: info@ceteor.com – Web: www.ceteor.com
Contact person: Mrs Estelle DONY
Jump starters for all sectors
CETEOR battery booster packs are professional jump starters for the recovery of all types of
breakdown vehicles with a partially or completely flat battery.
Our comprehensive range of battery boosters will allow you to make every 6, 12, 24 or 28V,
explosion or hybrid motor start. No matter if you face a battery breakdown on a car, truck,
boat, construction equipment, industrial generator, tractor or aircraft; you will always find a
CETEOR jump starter filling up your needs.
CETEOR'S professional battery boosters are designed to provide breakdown assistance for
cars, 4x4s, utility vehicles, mini vans, vans, etc. with a flat battery – petrol or diesel.
Back to homepage
CO-JOINT
Rue Côte d’Or 279
4000 LIEGE
Tel: 32-(0)42521741 - Fax: 32-(0)42521402
Email: cojoint@skynet.be- Web: www.cojoint.com
Contact person: Mr Thierry KEUTER
Specialised in the cutting and manufacturing of gaskets from soft materials like rubber,
asbestos substitutes, felt, paper, cardboard, cork, industrial plastic and soft metals. O-rings,
V-rings, hydraulic gaskets according to many standards.
Sales of rope, braid and sealing for pump and valve. Active in the distribution of gear shafts
and supports, bearings, driving belts, pulley and chain, elastic coupling.
Delivery of tool kits and equipment, glue and grease.
Back to homepage
DASCOTTE
Rue de la Maîtrise 3
1400 NIVELLES
Tel: 32-(0)67442454 - Fax: 32-(0)67333362 - Mobile: 32-(0)498572210
Email: pascal.wasterlain@groupegmm.com - Web: www.groupegmm.com
Contact person: Mr Pascal WASTERLAIN
One of the latest remarkable acquisitions of the Group is DASCOTTE, located in Nivelles, the
nerve center of Brabant Wallon.
This workshop of fine machinery perfectly complements the activities of ATVE in Charleroi
while keeping its technical and commercial specificity.
With its own unique identity, on a human scale and fool proof dynamism, DASCOTTE
obtained ISO 9001 certification in 2008 and 2011 and with a view to investing in other areas
in light of its expertise and its policy strongly oriented towards total quality.
Back to homepage
DAYCO SASIC
Route de Wallonie
7011 GHLIN
Phone: 32-(0)65761111 - Fax: 32-(0)65761100
Email: c.berta@dayco.be - Web: www.dayco.com
Contact person: Mr Christian BERTA
DAYCO Products
DAYCO, a division of Mark IV Industries, is a leader in the research, design, manufacturing
and distribution of a broad range of belts, tensioners and pulleys for the automotive,
trucking, construction, agricultural and industrial markets.
Recognized by both original equipment manufacturers and the automotive aftermarket as
an innovative, technology-driven organization, DAYCO operates a fully integrated global
network of manufacturing facilities, distribution centers, technical centers and sales offices
employing a workforce of nearly 3,000 employees. DAYCO continues to be guided by the
same primary business strategy established over 100 years ago: to anticipate and satisfy the
needs of our customers by providing timely, quality products and services.
Back to homepage
DECOPREC
Rue de Wonck 57
4682 HOUTAIN-SAINT-SIMEON
Phone: 32-(0)42864562 - Fax: 32-(0)42594784 - Mobile: 32-(0)476692395
Email: info@lampiruna.com - Web: www.lampiruna.com
Contact person: Mr Aimé DEHARD
DECOPREC is an industrial company highly specialised in machining of all manufacturing
parts in various materials such as copper, brass, steel, metal alloys, etc. It markets its
products to multiple applications and under various brands including LAMPiruna, LED lamp
used in the field of leisure and utility.
Back to homepage
DELTRIAN INTERNATIONAL
Zone Industrielle de Martinrou - Rue du Berlaimont 21 A
6220 FLEURUS
Phone: 32-(0)71364030 - Fax: 32-(0)71438448
Email: filtration@deltrian.com - Web: www.deltrian.com
Contact person: Mr Jürgen ALEXIUS
As a specialist OEM air filter manufacturer, DELTRIAN has developed 22 years ago Total
Filtration Management.
Providing clean air to automotive customers in Europe, Africa and Russia, DELTRIAN has
succeeded to reduce energy costs and improve process quality output. From our R&D
laboratory in Belgium, DELTRIAN continuous to develop low energy consuming high
efficiency filters adapted to specific automotive process.
With intensive analysis of process, maintenance and cleaning our Dirt in Paint experts
implement “low hanging fruit” recommendations to improve first run and reduce polishing
and rework.
Back to homepage
DIMMA DESIGN
Avenue de l'Indépendance 41
4020 WANDRE
Tel: 32-(0)43621062 – Fax: 32(0)43622801
Email: b.michel@dimmadesign.com - Web: www.dimmadesign.com
Contact person: Mr Baudouin MICHEL
DIMMA’s main activity is car repairing. Each year, more than 800 vehicles come to the repair
shop. Many companies such as, Interleasing, Firemen vehicles of Liège entrust DIMMA with
their damaged cars. Customers’ faithfulness gives a clear indication of the serious character
and the quality of DIMMA’s services.
Moreover, DIMMA is approved by most of the insurance companies such as: AG, AGF, AXA,
SMAP and ZURICH.
Body kits DIMMA Concept
DIMMA manufactures coachwork kits under the name of DIMMA Design for cars such as
Peugeot, Citroen and Renault. For the making of these kits, DIMMA uses two materials:
polyester and sheet metal.
If DIMMA sublets the pressing of sheet metal, every polyester pieces are manufactured by
DIMMA itself. Not a single machine is used in this step of manufacturing. Most of the
DIMMA’s design kits are manufactured with polyester, a mixing of fiberglass and resin. That
material is breakable but also repairable.
The DIMMA Design 306 Maxi kit is the one that gives the best transformation quality. Its
widened wings are, in fact, made of steel which gives a good painting quality and a better
inflexibility. Unfortunately, the setting is a bit longer and the heavy wings, made of steel,
appreciably reduce the car performances.
When DIMMA became well-known, thanks to its large kit, it decided to extend its range of
products. Moreover, the company realised that the demand for coachwork kits was
increasing constantly. These products are manufactured thanks to new technologies such as
PURIM.
Back to homepage
DRADIN V. & FILS
Chaussée de Waremme 162
4500 HUY
Tel: 32-(0)85211478 - Fax: 32-(0)85211403
Email: info@dradin.com - Web: www.dradin.com
Contact person: Mr Serge DRADIN
Our family business has been active for over 40 years.
DRADIN is located in Huy, close to major highways and not far from Bierset airport.
We produce articles made of aluminium and their finishes.
Our expertise also allows us to cast anodizable aluminium alloys (Al-Mg).
Back to homepage
DSI DELTA SERVICES INDUSTRIELS
Rue du Mont d'Orcq 3
7503 FROYENNES
Tel: 32-(0)69640604 – Fax: 32-(0)69780079 – Mobile: 32-(0)479765796
Email: nadine@deltabeam.net - Web: www.deltabeam.net
Contact person: Mr Till SCHAEFER
Located in Belgium, DSI provides custom radio-tracing services and equipment intended for
optimizing internal combustion engines and lubricants, such as permanent measurement of
wear of engine parts, oil consumption and its impact on emissions, measuring oil dilution
and the rate of aeration of lubricants, etc.
DSI has a testing and inspection centre for mechanical parts and lubricants. Our services are
intended for the engineering industry: automotive, heavy goods, aircraft industry, etc.
DSI is involved as an R&D partner or sub-contractor in the context of developing lubricants
and new engineering solutions, in particular with a view to adapting engines to new
environmental standards.
Main customers:
Services offered by DSI: hire and sale of measuring equipment, custom measuring services
including on-site, measuring services on internal testing equipment (test benches for engines
and lubricants), R&D partnerships.
Renault SAS (France), Renault F1 Team (France and United Kingdom); Total France, PSAPeugeot S.A., Volvo Trucks, I.F.P. (French Oil Institute), Le Moteur Moderne (A.V.L.), Sodemo
Racing, Case New Holland, Federal Mogul (France), E.D.F. (Electricité de France), C.E.A.
(Atomic Energy Commission), Ricardo Consulting Engineers (United Kingdom), BP Castrol
(United Kingdom), Cosworth (United Kingdom), Bentley (United Kingdom), Prodrive-Tickford
(United Kingdom), Land Rover/Jaguar (United Kingdom), M.I.T. (United States), Magna
(United States), GM (United States), SK Corp (South Korea), Maruti-Suzuki Group (India), etc.
Back to homepage
D-TECH ELECTRONIC
Rue Jean Jaurès 176
4430 ANS
Tel: 32-(0)43720716 – Fax: 32-(0)43720719
Email: info@domestia.be - Web: www.domestia.be
Contact person: Mr Dany TOUSSAINT
D-TECH develops solutions for its own brand, Domestia, in the home automation sector.
In addition, we develop custom solutions for different customers in the following sectors:
automotive, bread slicing machines, advertising hoardings, complex heating regulation and a
host of other sectors.
D-TECH Electronic designs turnkey projects in the fields of printed circuit boards, the
production of embedded software as well as management software running on PCs.
Main customer:
Car industry: Carat-Duchatelet
Back to homepage
DYNATEK
Ruthier 1
4950 FAYMONVILLE
Tel: 32-(0)80672163 – Fax: 32-(0)80678604 – Mobile: 32-(0)475835110
Email: b.waty@dynatek-technologies.com - Web: www.dynatek-technologies.com
Contact person: Mr Bernard WATY
Sale of IT files for vehicles
Company of automobile mechanics specialized in:



The reprogramming of electronic cases for cars;
The preparation of engines for competition cars;
Equipment’s for the new technologies of biofuel (R&D for decrease of consumption).
Back to homepage
ECO-DEC
Rue de Maestricht 84
4607 BERNEAU
Tel: 32-(0)43793585 – Fax: 32-(0)43795519
Email: info@eco-dec.be - Web: www.eco-dec.be
Contact person: Mr Eugène DECKERS
ECO-DEC has been working in the solvent waste-processing sector for 25 years.
We have developed a new distillation system, which produces a purer solvent ready for
reuse in many applications. The system is suitable for a wide range of solvents such as
trichloroethylene, aromatic solvents, perchloroethylene and chlorous solvents.
The new system uses a heating element sandwiched in an aluminium plate and placed at the
bottom of the recycler. This allows an efficient and even transfer of heat to the solvent
throughout the distillation process. The ECO-DEC recycler is capable of recycling all solvents
within a mix in one cycle. The ECO-DEC recyclers are water-cooled and virtually maintenance
free!
As well as the advantages above, recycling your solvent waste cuts out the need to store
waste which has associated risks and also the cost of waste removal.
Back to homepage
ECOPLAST TECHNOLOGY
Rue Louis Blériot 37
6041 CHARLEROI
Tel: 32-(0)71560020 - Fax: 32-(0)71560290 - Mobile: 32-(0)476900550
Email: bgonsette@ecoplast-technology.eu - Web: www.ecoplast-technology.eu
Contact person: Mr Bernard GONSETTE
A technological step ahead in the world of plastics
Inventor of the ECOPLAST system and world leader, ECOPLAST TECHNOLOGY provides clients
with a service range unique in Europe.
From study to mass production, through design and development phases, the entire process
is supported from A to Z by the same entity.
More than 10 years of expertise and continuously updated state-of-the-art technology are
our assets to develop products at a lower cost in all sectors.
Back to homepage
ELCOMETER
Rue de la Vallée 13
4681 HERMALLE-SOUS-ARGENTEAU
Tel: 32-(0)43799610 - Fax: 32-(0)43740603
Email: be_info@elcometer.be - Web: www.elcometer.com
Contact person: Mr Frédéric TALBOT
For more than sixty years ELCOMETER has been a world leader in the design, manufacture
and supply of inspection equipment to the coatings industry.
Ever since the first ELCOMETER gauge was manufactured in 1947, our philosophy has been
to provide ‘best in class’ design, quality and service at a competitive price. By concentrating
on these core values, ELCOMETER has grown into a global network with representation in
over 70 countries.
With a range of products specifically developed to meet the needs of the coatings industry,
ELCOMETER is well positioned to provide you the solution to your inspection requirements whatever and wherever they might be.
Back to homepage
ELOY & BECKER
Boulevard d'Avroy 292
4000 LIEGE
Tel: 32-(0)42249690 - Fax: 32-(0)43719326
Email: infoBE@eloy-becker.com - Web: www.eloybecker.com
Contact person: Mr David ELOY
Sales Engineering and Global Sourcing
Sales Engineering
We represent our Asian partner producers to major accounts all over Europe offering low
cost products that meet the highest quality requirements. Via our offices in Asia and Europe,
we are responsible for sales promotion, monitoring development and technical support, as
well as for production and logistics arrangements for supplying sub-assemblies that are used
in the assembly of vehicle equipment and vehicles the world over: switches, magnetic
sensors, electric actuators, control units...
Global Sourcing
For particular products not in our current range, we work as purchasing consultants and
analyze the Asian markets in order to identify the best suppliers in the low cost countries
that meet our customers’ specifications.
Research and development
We are involved at all stages of the product life-cycle, from design to production. By relying
on our basic expertise and experience of existing products, we provide custom solutions
tailored to our customers’ specific technical and operational demands. We are considered as
integrators, exercising all the skills required to develop and manufacture an operational
mechatronic system.
Our approach to Global Sourcing comprises four stages:
1. Product analysis:
• Material analysis and identification of the potential of sourcing from a low cost country.
• Analysis of the supply chain and potential savings.
• Definition of a specification in agreement with the customer.
2. Market analysis:
• Analysis of the market and supplier pre-selection.
• RFQ based on customers’ specifications and objectives.
• Audit of preselected suppliers: quality, technology, finances.
• Comparison and summary of the best suppliers (incl. company profiles).
3. Execution:
• Visit to and audit of suppliers chosen with the customer.
• Negotiations with the supplier.
• Start-up of development and industrialization.
4. Project management:
• Communication link between the customer and supplier if necessary.
• Technical support during development or change of product specification.
• Start-up of production and permanent quality control
• Full logistics services including warehousing and just in time delivery.
Main customers:
PSA, VW/Audi, Porsche, TRW, Plastic Omnium, Continental Automotive Systems, MGI
Coutier, Trelleborg
Back to homepage
EURO-LOCKS
Rue de la Fontaine 8
6600 BASTOGNE
Tel: 32-(0)61212261 – Fax: 32-(0)61212265
Email: daniel.ceron@euro-locks.be - stephan.wilmotte@euro-locks.be
Web: www.euro-locks.be
Contact persons: Mr Daniel CERON - Mr Stephan WILMOTTE
LOWE AND FLETCHER/EURO-LOCKS GROUP is one of the largest lock manufacturers and lock
suppliers with factories in UK, Belgium, France, Germany, Poland, USA and China. We specialise
in the design and manufacture of a wide range of locking systems for industry. We are part of an
international group, supplying more than 50 million products each year. Alongside the
production of our traditional locks and locking component range, we specialise in co-operative
customer projects, designed to meet the needs of our customers across a broad range of
markets in the UK, Europe and Worldwide. Established in 1889, we are still a privately owned
and controlled group, which gives us a strong family ethos and a long term commitment to our
business and our customers.
We manufacture our products in six factories and supply globally under the banner LOWE &
FLETCHER in UK and under the name EURO-LOCKS outside UK.
Our locks are used in numerous accessories for automotive applications such as: racks for ski and
bicycle, roof boxes, locking tow bars, petrol and ADBLUE filler caps, etc.
We produce locks and handles that are used in: industrial and earthmoving machines, electrical
enclosures, lockers, steel and wood furniture for office and factory, letter boxes, parcel boxes,
fitness centers, etc.
Back to homepage
EUTOMATION & SCANSYS
Industriestrasse 28B
4700 EUPEN
Tel: 32-(0)87561008 – Fax: 32-(0)87561009
Email: info@eutomation.be - Web: www.eutomation.be
Contact person: Mr Philippe BREUER
EUTOMATION & SCANSYS provides innovative solutions in the following sectors: assembly,
robotics, computer integrated materials handling, vibrating feeders, the production of
prototypes, dynamic test beds, special test beds, measuring equipment and automated
control systems, data acquisition and processing, modernizing testing equipment.
Main customers:
Bosch, Daimler, Tenneco Automotive, Delphi, Jtekt, Punch Powertrain
Back to homepage
EVOLVE POWERTRAINS
Rue Bouquette 78
4802 HEUSY
Mobile: 32-(0)479461116
Email: pierre.detre@evolve-pwts.com - Web: http://evolve-pwts.com
Contact person: Mr Pierre DETRE
EVOLVE POWERTRAINS is an engine engineering company based in the east side of Belgium,
close to Germany, The Netherlands and France, specialized in internal combustion engine,
alternative fuels and alternative powertrains development for vehicles and industry.
It has capitalized a strong experience in engine engineering through 20 years in Formula 1
engine departments of Renault Sport and Toyota Motorsport.
EVOLVE POWERTRAINS is partner in the group of experts in engine engineering A3E.
Core business:





engineering consultancy
design and development of engines, engine parts and systems
design and development of electric powertrains
expertise in alternative fuels
racing components designer and distributor
Back to homepage
EXPRESSION
Parc Artisanal - Allée des Sorbiers 1
4190 WERBOMONT
Tel: 32-(0)86345620 - Fax: 32-(0)86345630 - Mobile: 32-(0)475785938
Email: info@expression.be - Web: www.expression.be
Contact person: Mr Daniel KNUBBEN
Tuning for Mercedes-Benz cars
EXPRESSION S.A. is in no way affiliated with Daimler Chrysler or Mercedes Benz AG.
"Mercedes", "Mercedes-Benz", the three points star and various model numbers are register
trademarks of Daimler Chrysler.
These terms are used for identification purposes only.
Back to homepage
E-XSTREAM ENGINEERING
Rue du Bosquet 7
1348 LOUVAIN-LA-NEUVE
Tel: 32-(0)10866425 – Fax: 32-(0)10840767
Email: roger.assaker@e-xstream.com - Web: www.e-xstream.com
Contact person: Mr Roger ASSAKER
Automotive
E-XSTREAM offers the automotive industry the technology and industry expertise they need
to reduce the cost and time needed to develop innovative and higher quality products.
Process description
DIGIMAT is used across the automotive industry as a predictive software platform aimed at
modeling the behavior of reinforced plastics parts, rubber parts, thermoplastic, elastomer
parts and composite sandwich structures.
OEMs and 1st Tier Suppliers use Digimat to CAE interfaces to model the behavior of
reinforced plastics used in exterior, interior and under the hood parts as a function of the
local fiber orientation induced by the injection molding of the part.
DIGIMAT is strongly coupled to major nonlinear FEA software (Abaqus, ANSYS, LS-DYNA,
PAM-CRASH and SAMCEF) and to Injection Molding software (Moldflow, SigmaSoft,
Moldex3, REM3D).
Material Suppliers use DIGIMAT to develop new material grade, to optimize the
performance of their material offer and to support their end customers in choosing the
optimal material for the target application performance.
Reference customers
Integrated crash pads allow weight and cost reductions. Setting the absorption behavior is
only possible through a rigorous composite modeling. An integrated structural analysis with
DIGIMAT clearly reveals those benefits. Sandro Wartzack, Head of Simulation, Brose
Targeted materials and applications
Plastics:









Rubber:

Technical front end carrier
Radiator tanks
Safety equipment’s
Air intake manifolds
Door panels
Clutch pedals
Airbag containers
Tire pressure monitoring systems
Etc.





Run on flat tires
Truck tires
Anti-vibration systems
Fluid transfer hoses
Seals
Etc.
Targeted performances




Shape stability (part war page induced by
temperature variation)

Structural stiffness

Vibration frequencies and modes
Damage under cyclic loading


Related materials and products
Engineering Plastics Digimat-CAE/3DTimon
Hard Metals
Digimat-CAE/Abaqus
Nano Composites Digimat-CAE/Ansys
Rubber
Digimat-CAE/LS-Dyna
Sandwich Panels Digimat-CAE/MSC.Marc
Digimat-CAE/Moldex3D
Digimat-CAE/Moldflow
Digimat-CAE/Pam-crash
Digimat-CAE/REM3D
Digimat-CAE/Radioss
Digimat-CAE/Samcef
Failure under quasi-static loading
Failure under crash loading
Long
term
behavior
(stress
relaxation and creep)
Weight reduction
Etc.
Digimat-CAE/Sigmasoft
Digimat-CAE/Simulayt
Digimat-FE
Digimat-MAP
Digimat-MF
Digimat-MX
Micross
Back to homepage
FEDERAL - MOGUL
Avenue Champion
6790 AUBANGE
Tel: 32-(0)63382211 - Fax 32-(0)63382279
Email: daniel.delattre@federalmogul.com - Web: www.federal-mogul.com
Contact person: Mr Daniel DELATTRE
FEDERAL-MOGUL Corporation is an innovative and diversified $6.9 billion global supplier of
quality products, trusted brands and creative solutions to manufacturers of automotive, light
commercial, heavy-duty and off-highway vehicles, as well as in power generation, aerospace,
marine, rail and industrial. The 45,000 people of FEDERAL-MOGUL located in 34 countries
drive excellence in all they do.
Our globally-networked engineering and technical centers in the U.S., Europe and Asia
enable us to bring to our customers breakthroughs in advanced technology and innovation.
We are a premier supplier of products, services and solutions to original equipment
manufacturers that use our quality components in their vehicles and automotive systems,
and to aftermarket customers who sell our world renowned brand-name replacement parts
through repair shops and retail outlets. We partner with a global network of suppliers whose
commitment to excellence and on-time delivery is crucial to our success.
For more than a century, we have developed the innovative products our customers need to
produce the next generation of vehicles. Now, as we write the history of our next 100 years,
we continue to build on our position status as a market leader in product and service
solutions to set ever higher standards and continually exceed customer, shareholder and
employee expectations.
Back to homepage
FERONYL
Boulevard Industriel 101
7700 MOUSCRON
Tel: 32-(0)56857530 - Fax 32-(0)56857538
Email: feronyl@feronyl.com - Web: www.feronyl.com
Contact person: Mr Geoffrey DUCROCQ
Company specializing in the injection moulding of technical parts in plastic and composite
materials since 1950
Research and development:
Robotization, automation, new injected technical materials, complex duplicate moulding,
thin-wall injection moulding
Main customers:
Valeo, Volvo, Recare, Delphi, Hydac…
Back to homepage
FILAME BRUSSELS
Zoning Industriel de Nivelles Nord - Avenue Robert Schuman 121
1400 NIVELLES
Tel: 32-(0)67550600 - Fax 32-(0)67550601
Email: info@filame.com - Web: www.filame.com
Contact person: Mr Nicolas HODJEFF
Specialised in the fabrication of wire and sheet metal parts, FILAME is your ideal industrial
partner for the production of precision springs and cut, stamped and bended parts in small,
middle or big batches.
From the design through to the manufacturing, not less than our 50 qualified staff members
are at your disposal. Thanks to the quality of the team and machinery, over 500 million parts
a year’s leave the FILAME workshops.
On our Swiss, German, Italian and Japanese CNC machines, the control systems guarantee
flawless fabrication. Their flexibility gives unrivalled assembly options and extraordinary
production speeds and allows us to offer highly competitive prices.
Equipped with sophisticated CAD machines, FILAME can design, simulate and fabricate the
most suitable tools for your production runs. The manufactured pieces are stored and can be
delivered to any Europe location within 24 hours.
FILAME is ISO 9001:2000 certified and works with SPC.
Material: our materials relies on proven expertise and an undeniable experience which
guarantees that the selected material suits your needs best: Carbon steel, Inox, Galvanised,
Bezinal, Pet Coated, copper, bronze, aluminium, Nimonic, Inconel, Oteva...
Surface treatments: deburring, polishing, epoxy paintwork, galvanizing, platings (white or
black zinc, nickel, copper, chrome / bi-chrome…) phosphatation, Delta Tone, Delta Seal, Shot
Penning...
Back to homepage
FREE FIELD TECHNOLOGIES FFT
Axis Park Louvain-la-Neuve - Rue Emile Francqui 1
1435 MONT-SAINT-GUIBERT
Tel: 32-(0)10451226 - Fax 32-(0)10454626
Email: jbl@fft.be - Web: www.fft.be
Contact person: Mr Jean-Louis MIGEOT
Free Field Technologies (FFT) develops and supports the Actran family of acoustic CAE
products. The company proudly serves customers as diverse as car manufacturers and their
suppliers, civil and military aircraft and aircraft engine manufacturers, loudspeakers and
other audio device producers, consultants, universities and research centres.
FFT also provides related services: acoustic CAE consultancy (on-site or off-site), training,
specific developments, contract research and provides a range of services in the field of
acoustic design. Free Field Technologies is also involved in multiple research programs in
acoustics, aero-acoustics, vibro-acoustics, high-performance computing etc.
Free Field Technologies operates from its Belgian headquarters and from branch offices in
Toulouse (France), Tokyo (Japan) and Troy (Detroit, Michigan).
In September 2011 FFT joined MSC Software Corporation, leading provider in Virtual Product
Development technology, including simulation software and professional services.
Back to homepage
GAMMA-WOPLA
Rue de la Royenne 78
7700 MOUSCRON
Tel: 32-(0)56852085 - Fax: 32-(0)56845822
Email: info@gammawopla.com - Web: www.gammawopla.com
Contact person: Mr Jan VANDEWIELE
Plastic injection molding: a leader in plastic bins and crates
GAMMA WOPLA works as a designer and producer of industrial plastic bins and crates:
pharmaceutical, automotive, logistics and retail.
Plastic crates display unique characteristics:





Advanced technology
They comply with the highest international, sanitary and environmental standards
Ratio quality, price
Produced with high precision moulds on modern machines equipped with Robots
The crates are 100 % recyclable
Back to homepage
GILLET VERTIGO
Rue Saucin 84
5032 ISNES
Tel: 32-(0)81568444 – Fax: 32-(0)81568746
Email: t.gillet@gilletvertigo.com – Web: www.gilletvertigo.com
Contact person: Mr Tony GILLET
Conception and construction of automobiles, the VERTIGO, the only sports car of Belgian
manufacturing
Renovation of cars
Activities of Racing
Construction, assembly and trade of motor vehicles
Back to homepage
GLOBAL DESIGN TECHNOLOGY - GDTECH
Rue des Chasseurs Ardennais 7
4031 ANGLEUR
Tel: 32-(0)43678711 – Fax: 32-(0)43766822
Email: info@gdtech.eu - Web: www.gdtech.eu
Contact person: Mr Guy JANSSEN
Engineering company, GDTECH offers his expertise to industrial projects spanning across all
necessary stages for Design, Simulation and Industrialisation.
In our own offices or on customer site, as provider of services, project manager or
consultant, in the aeronautical, space, transport, defence and energy industries ...








Design : development phase, dedicated to analysis
Numerical simulation : structures and fluids
Tools design and control of manufacturing
Hydromechanics : certification, development, technical support
Support to Validation : Management, Following and Analysis
Support to In service product : engineering department, production, aftersales
Support to Production : methods, process cert
Technical documentation
GDTECH has been developing its skills in crash simulation in the transport field since 2005.
The objectives covered by this new focus are many and varied: modelling and optimization
of guardrails and the improvement of vehicle digital models. GDTECH is also involved in the
safety of motorcyclists and vehicle occupants.
Thanks to our knowledge of the most advanced industrial technologies and our expertise,
we provide you with a customized solution.
Our assets... our expertise, our CAE complete offer and our quality commitment (EN9100
certified).
Localisations: Belgium (HQ), France (Pau and Massy)
Main customers
Techspace Aero, Turbomeca, Messier Dowty, Snecma Moteurs, SONACA, SABCA, Centre
Spatial de Liège, FN Herstal, CMI, Renault, Valeo, Caterpillar, Arcelor, IBA…
Back to homepage
GEFCO
Rue du Parc Industriel 27
7822 ATH
Tel: 32-(0)68250250 – Fax: 32-(0)68551576
Email: philippe.vincent@gefco.be - Web: www.gefco.net
Contact person: Mr Philippe VINCENT
Outbound automotive logistics
Towards multimodal logistics solutions
As a subsidiary of the PSA group, GEFCO has been serving the automotive industry for 60
years. The European leader in automotive logistics, the group has developed considerable
expertise in vehicle distribution. From assembly plants to dealerships, GEFCO provides
reliable, competitive logistics solutions on behalf of distributors. With 4 million vehicles
distributed in 2010, GEFCO is positioned as a key logistics provider in this sector.
A recognised logistics integrator
An expert in automotive logistics, GEFCO designs, optimises and implements logistics plans
from production plants or ports to dealerships. The group offers high added-value services
for all players involved in automotive distribution, including storage, PDI (Pre-Delivery
Inspection), PPO (Post-Production Operations) and vehicle customisation for dealers.
These logistics solutions include three activities:


Multimodal transport from the factory: logistics engineering, transport plans,
scheduling, supervision, tracking, reporting
Added-value operations at the GEFCO site:
-
-

Vehicle customisation (Post-Production Operations): based on rigorous
specifications, GEFCO carries out added-value operations for car
manufacturers: windscreen engraving, installation of fog lamps, alarm
systems etc.
Vehicle preparation before distribution to the sales network (Pre-Delivery
Inspection): dynamic testing, removing protective covers, washing, cleaning,
interior preparation, mechanical and electrical tests, final quality control.
Capillary distribution: from the GEFCO site to the sales outlet, our teams distribute
vehicles to every marketing area and every dealer
Back to homepage
GRANDO
Parc Industriel - Rue du Commerce 14
1400 NIVELLES
Tel: 32-(0)67894848 – Fax: 32-(0)67894845
Email: infoweb@grando.net - Web: www.grando.net
Contact person: Mr Yves CHARLIER
GRANDO is a Belgian Company that designs, manufactures and commercialises technical
articles in foam and rubber (elastomers) since 1946. Throughout the years, GRANDO has
attracted a growing number of customers with high-quality products, competitive prices and
very short fabrication time. With their unique experience and knowledge of cellular
materials and elastomers, our engineers guide you towards the optimum solution in
response to your technical issue in a wide range of applications:
GRANDO it's in brief:
More than 300 different cellular materials and elastomers in stock
Tailor-made articles in any size and shape according to your specifications
Tailor-made moulding of rubber articles (with or without metal insert)
Laminating of various materials (foam, rubber, cork, felt, plastic films…)
Thermo compression of cellular materials such as foams of, PE, EVA, PP with or without
laminated textile on one our both sides
Assembly with pressure-sensitive adhesive, contact glue, cold vulcanisation, hot-melt…
High-pressure water-jet cutting of many materials (stainless steel, glass, wood, plastic,
rubber…)
Back to homepage
GREEN PROPULSION
Liège Science Park - Avenue Pré-Aily 20
4031 LIEGE
Tel: 32-(0)42397040 - Fax: 32-(0)42397049
Email: info@greenpropulsion.be - Web: www.grando.net
Contact person: Mr Yves CHARLIER
GREEN PROPULSION was founded in 2001 as a spinoff of the University of Liege (Belgium). It
has since become an independent specialist in ever cleaner motorisations:

Expertise for decision-makers based on practical experience with alternative fuels,
battery electrics, hybrids, fuel cells and an overall “Well to Wheel” vision

Simulations and optimisation of virtual vehicles for cost effectiveness before
development

Evaluation of state-of-the-art technologies on our test benches

Full development of prototype vehicles by a multidisciplinary team
Thanks to the 15 years of experience of its founders and the more than 15 unique
prototypes it has built, GREEN PROPULSION now works closely - not just as a subcontractor with several European manufacturers, primarily in the fields of urban transport and motor
sports.
In the field of plug-in hybrids, in particular, GREEN PROPULSION is without a doubt one of
the leading independent R&D centres in Europe, with no fewer than seven topologies and
innovative management strategies to its credit.
Back to homepage
G-TECH2
Avenue Alexander Fleming 10
1348 LOUVAIN-LA-NEUVE
Tel: 32-(0)10889700 - Fax: 32-(0)10458560 - Mobile: 32-(0)476474645
Email: gaetan.detroz@gtech2.com - Web: www.gtech2.com
Contact person: Mr Gaétan DETROZ
Since 2006, G-tech2 develops and distributes various tools to monitor, train and evaluate
drivers of all kinds of vehicles.
Our knowledge in this very specific business field is based on many years of experience of
the Gentleman Driver School.
Our tools are utterly helpful to various users:





Professional Training Centres
Professional examiners
Insurance companies
Companies and authorities managing a fleet
Transportation companies in general
Besides distributing these tools, G-tech2 has also developed a network of trainers who
actively use our systems in Belgium and abroad.
Back to homepage
HEWA
Rodter Straße 102
4780 ST-VITH
Tel: 32-(0)80226870 - Fax: 32-(0)80226247
Email: info@hewa.be - Web: www.hewa.be
Contact person: Mr Henri WARNY
Since 1986, your professional partner for stamping light metal for:





Tools Production
Prototypes and samples
Small, medium and large series
Transformation in thicknesses of 0.05 to 1 mm
Unwind - punch - rewind
Back to homepage
HUBITOOLS
Rue de la Station 13
1300 WAVRE
Tel: 32-(0)10420385 - Fax: 32-(0)10420380
Email: info@hubitools.com - Web: www.hubitools.com
Contact person: Mr Georges HUBINONT
HUBINONT S.A. was established in 1976 to import and distribute professional diagnostic
equipment and tools for the motor trade in Europe.
We have for 25 years developed a very strong relation with our suppliers and customers. Our
logistics and the impeccable quality of our service allow us to bring to the European market
an always improved choice of carefully selected innovative tools.
Our strategic location in the centre of Europe and our knowledge of the major European
languages allow us to be close to our customer with easy communication and fast deliveries.
Our services to the OEM customers also include the logistics, the adaptation of the products
and packaging to customers’ needs and the sourcing of specific products from all over the
world.
HU42018 - In-Line Flaring Tool
This new double flaring tool allows the user to simply and easily flare thin walled steel tubing
or copper tubing. It works with a ratchet, wrench or air wrench and is low profile to allow
the user to work in tight spaces, on or off of the vehicle.
STE97215 - Wireless Electronic Stethoscope
An electronic device that quickly pinpoints source and location of noise during a road test,
even on long vehicles (such as trucks, buses...) thanks to clamps that can be fixed onto
springs, shocks, body mounts, brakes, engine blocks, etc.
Back to homepage
ICOR
Avenue Lavoisier 37
1300 WAVRE
Tel: 32-(0)10239520 – Fax: 32-(0)10881901
Email: patrick.collignon@icor.be - Web: www.icor.be
Contact person: Mr Patrick COLLIGNON
Company specializing in the development, production and distribution of weather stripping
for windows and other bodywork parts for all types of vehicles. A company that also
concentrates on selling laminated glass repair systems and tooling used in the installation of
automotive glass
Research and development
A company able to develop all types of profiles on the basis of customer demand, and/or
extruded and/or injected piping in EPDM, plastic, TPE, TPV, etc. with single or multi
components, used in the automotive, personal or goods transport sector, as well as in any
other weather sealing application.
Main references
Saint-Gobain Autover, AGC Automotive, Pilkington, Guardian Glass, Rioglass, Belron, PG
Glass Group, Aston Martin, Prodrive.
Back to homepage
IDEATEC
Zone Industrielle de Noville-les-Bois - Rue Léopold Génicot 19 A
5380 FERNELMONT
Tel: 32-(0)81420010 – Fax: 32-(0)81579170
Email: info@ideatec.be - Web: www.ideatec.be
Contact person: Mrs Pauline JACQUEMIN
IDEATEC creates and produces consoles for use in controlling any equipment added to
emergency service and utility vehicles. Based on a single and independent connection,
IDEATEC systems greatly simplify the installation of this equipment.
Research and development
IDEATEC is constantly developing its products in order to provide the optimum response to
the needs of the various markets as quickly as possible. Several consoles are currently being
developed, responding to user demands according to their formats. Existing products are
constantly being improved.
Back to homepage
IMPERIA AUTOMOBILES
Liège Science Park - Avenue Pré-Aily 20
4031 LIEGE
Tel: +32-(0)42476010 - Fax +32-(0)42476019 – Mobile: 32-(0)473570207
Email: info@imperia-auto.be - Web: www.imperia-auto.be
Contact person: Mr Sacha PETROVIC
Specialising in the development of cleaner prototypes, Green Propulsion is reviving the last
Belgian make of car: Imperia.
Imperia Automobiles is preparing a world first: thanks to its sports hybrid motorisation
PowerHybrid®, the Imperia GP model is innovative for its extremely low consumption and
CO2 emissions, whilst still offering quite outstanding sports performance!
Opening the way to new vehicle design
The Imperia Automobiles project is clearly ambitious.
It involves nothing less than creating a new vehicle concept, implementing new
technologies, and at the same time introducing a new approach to driving and the pleasure
it brings.
It is ambitious too because this vehicle aims to join a stubbornly exclusive segment where
quality standards are very high.
And it is even more ambitious because Imperia Automobiles is proposing a world 1st in the
sector, both a small revolution and an incredible evolution.
The design of this vehicle hinges on three remarkable requirements:



Environmental concern, through motorisation based on Plug-in hybrid engine
technology supplemented by path-breaking autonomy in electric mode.
The pleasure of sport driving, obtained through high-level performance.
Attention to design conveyed through its neo-retro lines inspired from Imperia
history that will seduce the most demanding amateur.
3 parameters, 1 solution
There are vehicles that at present offer one, or even two, of these characteristics. The
originality and relevance of the Imperia Automobiles concept rest in the fact that it is the
only one able to meet all three of these requirements at the same time. The Imperia is
indeed a world first.
In keeping with the times, the Imperia project is part of a major trend in today’s world
which, quite rightly, is concerned more and more with the environment and sustainable
development. It also enables its potential purchasers to satisfy their taste for technology
oriented towards pleasure and aesthetic refinement whilst still making a socially-responsible
gesture.
Back to homepage
INNOVATIVE PRODUCTION
Rue du Bout de Là-Haut 256
7390 QUAREGNON
Tel: 32-(0)65760190 - Mobile: 32-(0)491491413
Email: info@3pmagic.com - Web: www.3pmagic.com
Contact person: Mr Dovindo SIBAU
The “3P Magic ®” is an innovative design object mainly intended for the automotive world
which allows combining the smell of a car air-freshener like the “Arbre Magique” with a
private picture and finally a passion symbol of an enterprise/association logo.
The “3P Magic ®” can be used as a personal or professional gift.
Back to homepage
IPIC PLASTIC
Rue du Haut Vinâve 63 Bis
4682 HOUTAIN-SAINT-SIMEON
Tel: 32-(0)42864885 – Fax: 32-(0)42865243
Email: info@ipicplastic.be - Web: www.ipicplastic.be
Contact person: Mr Joseph ROUSSEAUX
IPIC PLASTIC was established more than 20 years ago, of the encounter between a
mechanical workshop and a plastic injector. That is what makes its particularity: from the
conception to the final production and to the assembly, IPIC PLASTIC offers a real one-step
counter that integrates the various manufacture stages.
Regular investments have enabled to increase not only the production capacity but also the
types of realised products. Therefore the new markets have opened.
A dozen machines
Regularly renewed, the Machinery Park of IPIC is composed of a dozen machines from 15 to
270 tons for an injection volume up to 800 cm3, together with the device in line with the
production constraints. The material thus treated are: PE, PP, PS, PoM, ABS, PA, TPE with or
without load.
The set-up service and our way of proceeding have enabled to express ourselves in different
sectors of activities:





Aerospace
Automotive
Defence
Medical
Electric Industry

Mechanical Industry
Back to homepage
ISOMATEX
Scientific Park Crealys - Rue Camille Hubert 29
5032 GEMBLOUX (LES ISNES)
Tel: 32-(0)81728686 – Fax: 32-(0)81728689
Email: info@isomatex.com - Web: www.isomatex.com
Contact person: Mr Tigran VARTANIAN
The company ISOMATEX is the global leader in manufacturing enhanced volcanic rock
filaments (trademark: FILAVATM).
The production of FILAVA is unique thanks to a genuine and innovative treatment of the raw
material, basalt, which is enriched with various mineral additives to increase and guarantee
its original mechanical and chemical properties.
ISOMATEX has developed a unique production system which combines various leading edge
technologies for an accurate control of quality from raw materials to the end product.
In particular, the production equipment’s have been carefully selected and configured in
order to assure a tight control of temperatures at all stages of the process, from melting,
refining and drawing of the lava up to the production of the enhanced volcanic rock filament
FILAVATM, which has a diameter of less than 10 microns
Back to homepage
JTEKT TORSEN EUROPE
Rue Grand Peuplier 11
7110 STREPY-BRACQUEGNIES
Tel: 32-(0)64672211 – Fax: 32-(0)64677142
Email: jldam@torsen.be - Web: www.torsen.com
Contact person: Mr Jean-Louis DAM
Manufacturer of limited slip differentials for cars (TORSEN differential)
Main customers: Audi, VW, Toyota, Range Rover, Hummer, Alfa Roméo, BMW.
Back to homepage
KLÜBER LUBRICATION
Rue Cardinal Mercier 100
7711 DOTTIGNIES
Tel: 32-(0)56483333 - Fax: 32-(0)56486252
Email: sales@be.klueber.com - Web: www.klueber.com
Contact person: Mr Rudy VANLOOCKE
Our passion: innovative tribological solutions
Through personal relationships and consultation, we help our customers be successful. With
our ambitious technical concepts and experienced, competent staff we develop advanced,
efficient high-performance lubricants
Speciality lubricants for initial fill are at the core of our business. We offer our customers
expert tribological solutions by supplying tailor-made speciality lubricants directly to
customers in almost all branches of industry and regional markets. Our customers include
producers of components, modules, machines and systems as well as companies using this
equipment for their own production or processing activities.
KLÜBER LUBRICATION offers approximately 2000 different speciality lubricants, many of
them developed and manufactured to specific customer requirements. With competent and
customer-oriented consulting and wide-ranging services, our employees have established
KLÜBER LUBRICATION's excellent reputation as a partner to industry and trade.
With more than 80 years of experience, ample expertise in the industry, numerous
certifications, some 140 research and development engineers and other technical specialists
as well as high-performance testing facilities, we are one of the leading speciality lubricants
suppliers worldwide.
KLÜBER LUBRICATION was founded by Theodor KLÜBER in Munich in 1929, and to this day
our headquarters is located there. Our approximately 1900 employees, however, work for
our customers in more than 30 countries. More than 900 of them are sales specialists,
working in close contact with customers to develop ideas for new, even more efficient and
eco-friendly speciality lubricants.
We focus on systematic expansion of our business, extending our presence worldwide and
meeting the demands of our customers – no matter what the business of our customers is.
More than 80 % of our turnover is attained outside Germany.
Back to homepage
KRONOS
Rue des Pieds d'Alouette 37
5100 NAMUR
Tel: 32-(0)81401639 - Fax: 32-(0)81401725
Email: info@kronosracing.com - Web: www.kronosracing.com
Contact person: Mr Jean-Pierre MONDRON
Operation and development of race cars
Sports marketing consultancy
Incentive and event organisation
Technical works on old and new cars
Wholesale of vehicles, parts and accessories
Back to homepage
LAMBIOTTE ET CIE
Grand-Rue 79
6724 RULLES
Tel: 32-(0)63410080 - Fax: 32-(0)63411698 - Mobile: 32-(0)496562526
Email: l.meulders@lambiotte.com - Web: www.lambiotte.com
Contact person: Mr Luc MEULDERS
LAMBIOTTE & CIE started its activities in 1860 with forestry and sawmill exploitation,
producing railway sleepers. In a desire to increase the value of its wood waste production,
the company adopted an innovative carbonization process to convert wood to charcoal. One
of the chemical by-products of this distillation technology was methanol.
From 1901, Lambiotte’s interest in chemicals grew with the production of formaldehyde
from wood methanol. By 1970, Lambiotte’s passion for chemistry led to the use of
formaldehyde as a reagent in the production of acetals and hemicetals, known as solvents.
Since then, the company has continued to develop its expertise in production technologies,
making it a leader in the highly specialised field of acetals synthesis.
Acetals belong to a specific chemical family, resumed in the generally term solvent, distinct
from ethers. Lambiotte’s acetals are produced by reactions between alcohols and aldehydes.
The acetal molecule can be either linear or cyclic. With regard to their toxicity and
ecotoxicity, Lambiotte’s acetals show very good profiles for health and environment.
Back to homepage
LASEA
Rue Chasseurs-Ardennais 10
4031 ANGLEUR
Tel: 32-(0)43650243 – Fax: 32-(0)43843755
Email: info@lasea.be - Web: www.lasea.eu
Contact person: Mr Axel KUPISIEWICZ
Laser systems and solutions for industry:
• Marking systems for parts tracking, vision and data management.
• Plastics welding systems.
• Surface texturing systems (decoating, patterning).
• Micro-machining systems.
• Components and accessories (CO2 sources, YAG, laser to fibre, diodes, optical engineering,
laser safety…).
Research and development
Partner to the idea of integration on production lines:
Laser expertise: preliminary studies, feasibility studies, return on investment calculations,
validation, development of complete processes and prototypes.
Sectors of application: laser marking and tracking, laser plastic welding, decoating, micromachining, surface treatment…
Back to homepage
LASERCO LASER COATING DIAMOND TECHNOLOGY
Rue de la Croix du Maïeur 17
7110 STRÉPY-BRACQUEGNIES
Tel: 32-(0)64841412 – Fax: 32-(0)64261454 – Mobile: 32-(0)477918054
Email: hugues.desmecht@laserco.be - Web: www.laserco.be
Contact person: Mr Hugues DESMECHT
OUR PRODUCT
Protect your metal parts against wear with « laser cladding »
OUR EXPERTISE
To develop and apply customised laser claddings resisting to:






Abrasion
Corrosion
Erosion
Cavitation
Shocks
Chemical products (acids, bases, chlorides, etc.)
Create
Are you looking for new applications? We can help you create new kinds of cladding.
Diamonds, ceramics, metals and inert substances can all be used in our cladding
Develop
You would like to improve the reliability of your anti-wear surfaces and their lifespan,
enhance the availability of your installations and reduce production loss: these are our
development goals.
Laser cladding can improve your performance.
Customise
Just tell us what your metal parts have to endure, the atmosphere in which they work (heat,
humidity, etc.), what surface finish is required, and we will conceive the cladding to suit your
needs.
Apply
If you want to personalise the cladding for your surfaces, we can realise it, using the latest
laser technology
OUR SERVICE
• Custom made
We will adapt our cladding process to your application
• Before and after laser cladding
We will descale the old surface and finish off the part once the cladding has been applied.
Back to homepage
LAZZERINI
Zone Industrielle de Ghlin - Baudour - Rue des Roseaux 2
7331 BAUDOUR
Tel: 32-(0)65430235 – Fax: 32-(0)65430237
Email: info@lazzerini.be - Web: www.lazzerini.be
Contact person: Mr Thierry LAZZERINI
Founded in 1963 by Giulio LAZZERINI who had a strong belief in the coming success of
composite materials, our company specialised at first in the manufacturing of roof makingup lengths and tombstones
In 1967, our company got the status of limited company and moved to a bigger industrial
site. We then manufactured upholstery elements for wagons and employed 5 workers.
In 1990, Thierry LAZZERINI, in charge of the marketing support, enhances the growth of the
company, inducing the appointment of 5 new workers and the extension of the workshop
area to 1500 m².
In September 2003, we undergo a terrible fire which devastates our buildings in Ecaussinnes.
We put ourselves following the search for new establishments which we find in the zoning of
Ghlin - Baudour or we take a building of 1500m² on a ground of 1,5ha with very new
installations of treatment of foul air (dust and gas).
We are very active in the bathroom equipment field for which we make polyester
components for nursery, paediatric and maternity furniture.
We have developed complete bathroom cubicles comprising: shower, wash basin and toilet,
suitable for hotels, communities and public welfare services (C.P.A.S).
We also make other items in various other fields such as:
Car bodywork: Fun Cup bodywork, seats, ambulance parts, cornice covering for the interior
bodywork of the Glutton street cleaner.
Construction: isolated industrial gutter troughs, roofing connectors, various types of
waterproofing, balconies, terraces, swimming pools.
Bathroom equipment: bathroom components, kitchen sinks, shower cubicles, complete
bathroom cubicles.
Technical industrial components: isolated industrial gutter troughs, saline sprays, Poinver
(glass crusher containers)
Scenery / Theme Parks: theatre and advertising scenery, Eurodisney, Parc d'Aventures
Scientifiques, Walibi, etc.
Back to homepage
LECLERCQ ETS
Zone Industrielle n° 3 - Rue Prés-Champs 10
4671 BARCHON
Tel: 32-(0)43879595 - Fax: 32-(0)43879598
Email: direction@leclercq-belgium.com - Web: www.leclercq-belgium.com
Contact person: Mr Albert PAGGEN
Repair of starter motors and alternators, sale of complete machines and spare parts for
repairers.
Back to homepage
LISMONDE DANIEL - HIGH TECH
Rue Joseph Wauters 37
4350 REMICOURT
Mobile: 32-(0)495208290 - Fax: 32-(0)19544705
Email: info@hi-tech.be - Web: www.hi-tech.be
Contact person: Mr Daniel LISMONDE
Tuning and Racing





Body kits and body parts for car and motorbike
Light brows
Races and adjustable spoilers
Air intakes
DTM splitters
Materials






CFK –Polyester
Carbon
Kevlar
Polyurethane
ABS
Aluminium
Back to homepage
MACTAC EUROPE
Boulevard Kennedy
7060 SOIGNIES
Tel: 32-(0)67346211 - Fax: 32-(0)67330574
Email: mactac.europe@bemis.com - Web: www.mactac.eu
Contact person: Mr Philippe LOUWETTE
A reputation for innovation
Through the years, highly skilled research & development teams at MACTAC have helped the
company pioneer many industry firsts.
MACTAC was the first company to offer the world the following innovations:




patented "non-ooze" adhesive sheet products with scored liners for the offset
printing industry;
mounting and overlaminating films with optically clear adhesives and UV inhibitors
for the photographic industry;
exclusive hot melt adhesive constructions for freezer labelling applications for the
packaging industry.
unique
tyre
labelling
products
for
the
automotive
industry
(www.mactac.eu/solutions-automotive-3-2.htm);
1. Acrylic Foam Tapes
http://www.mactac.eu/products-acrylic-foam-tapes-aft-3-2317--2318.htm
MACTAC Acrylic Foam Tapes are ideal for applications where high tack and extremely
high bond are required: e.g. heavy POS displays, demanding indoor or outdoor
applications in Building applications, cladding, fixation of structural windows, in the
automotive industry and many other applications.
2. Stone Chip Protection
http://www.mactac.eu/products-stone-chip-protection-3-2321--2322.htm
The smart choice to win the battle against stone chip damage!
Stone Chip Protection 200 and CrystalProtect 150 consist of a Polyurethane (PU) film
coated on one side with a permanent acrylic adhesive.
Automotive and aerospace industry: specially designed to reduce stone chipping and
insect damage on painted surfaces. Excellent for protecting car underbodies and side
mirrors, spoilers, rocker panels, etc.
3. CPF
http://www.mactac.eu/products-cpf-3-2335--2337.htm
Short term prevention against damage and scratches during assembly, storage, show
room demonstration or transportation
•Short term resistant to abrasion and weathering
•No impact on the protected surface (no contamination with adhesive)
•No adhesive transfer when peeling off
•Good compatibility with painted surfaces
•Easy to laminate smoothly at ambient temperature without wrinkles or air bubbles
« Personalize your car with TuningFilms ! »
http://www.mactac.eu/products-tuningfilm-black-matt-1-2444--2376.htm
This commitment to R & D has positioned MACTAC as a leading innovator in the pressure
sensitive industry.
Manufacturing Capabilities: Achieving New Heights
MACTAC is not only focused on new products. High performance and quality consistency
become the key words in today's industrial world.
It is why MACTAC EUROPE SA has implemented in its manufacturing facility a continuous
quality improvement system certified to the ISO 9001 standard. This enables employees to
deliver top quality products and top quality services to our Customers.
But quality is also a question of manufacturing equipment. Here too MACTAC has to be
considered as an industry leader with the latest investment in manufacturing and finishing
equipment on its European site. This new fully automated plant is to be considered as the
jewel of the self-adhesive industry which guarantees quality consistency to satisfy customer
demands.
Ultimately, satisfied and successful customers are the measure of MACTAC quality. And
pursuing this value will continue to drive MACTAC into the future.
Back to homepage
MANTHYDRO
Grand’Route 562
4400 FLEMALLE
Tel: 32-(0)42339620 – Fax: 32-(0)42332130
Email: info@manthydro.be - Web: www.manthydro.be
Contact person: Mr Antonio AQUILINA
Pipes, fittings, hydraulic adapters and accessories
Industrial hoses and couplings
Flexible hoses and stainless steel fittings
Tubes, joins with rings – rapids, compensators, valves, accessories
Back to homepage
MATHONET MARCEL
Haut de Treme 3
4801 STEMBERT
Tel: 32-(0)87331183 – Fax: 32-(0)87336135
Email: info@mathonet-moteur.be - Web: www.mathonet-moteur.be
Contact person: Mr Marcel MATHONET
The company’s business is the repair of petrol and diesel engines, turning, grinding, garage
work and engineering in general, purchase, sales, import, export and manufacture of parts
relating to these activities.
Sectors: automotive, transport, agriculture, civil engineering, industry and marine.
Back to homepage
MATRIO GROUP
Zone Industrielle des Hauts Sarts - Zone 3 - Rue des Alouettes 1
4042 LIERS
Tel: 32-(0)42789160 – Fax: 32-(0)42789690
Email: info@matrio.com - Web: www.matrio.com
Contact person: Mr Joseph ROSEN
MATRIO GROUP is a specialist for high-tech metal plating. The group develops efficient and
innovative solutions for a demanding and ambitious group of customers: automotive
industry, telecommunication, electronics, aerospace industry, military, etc.
In working with MATRIO, the customer has access to the know-how of three specialist
companies under one umbrella: EX TECLYSE and MECADIGIT are specialized in electro
deposition on metals, while NANOXID develops new surface functionalities based on
organic-inorganic hybrid nano-coatings.
Reel-to-reel plating of carrier stripes
Reel-to-reel plating is the answer to the demands coming from the automotive industry, the
electronics sector and in the general from areas of connector engineering.
MATRIO GROUP possesses multiple continuous lines offering a wide array of specifications
for a broad plating spectrum.
Back to homepage
MECANIQUE RESSORT BELGIUM
Prolongement de l’Abbaye 86
4040 HERSTAL
Tel: 32-(0)42405570 – Fax: 32-(0)42405579
Email: info@mecaressort.be - Web: www.mecaressort.be
Contact person: Mr Jos BODEN
MÉCANIQUE RESSORT BELGIUM S.A. is a renowned company for its production of:




Precision springs in wire and strip steel
Compression, traction, torsion and form springs
Stamping and bending operations according to customer needs
Assemblies and sub-assemblies - mechanic precision welding
in small, medium and large series.
We put at your profit a dynamic team of technical professionals and a long experience in
very stringent customer specific markets. We dispose of a well-adapted machine shop which
was the result of intelligent investments towards customer target markets over a period of
more than 70 years in spring business. This makes us your competitive partner for a quick
and reliable solution.
We are located in a modern building complex in the industrial site of the Hauts-Sarts, near to
a favourable network of road and air transport facilities. We work in creative cooperation
with our customers of various market segments. Our principal customer sectors are:
aeronautics and aerospace, automotive, armament, nuclear, electric household appliances,
light and building application industry.
In order to satisfy customer needs in a worldwide competition, we established several
partnership agreements with highly qualified partners inside and outside Europe.
In order to serve you and your increasing stringent needs, every day you can count on our
professional and dynamic solutions.
Back to homepage
MECELFIN
Avenue Albert Einstein 12
1348 LOUVAIN-LA-NEUVE
Tel: 32-(0)10452056 - Fax: 32-(0)10454062
Email: info@mecelcar.be - Web: www.bqeng.be
Contact person: Mr Bernard STEENHOUT
Internal arrangement of priority vehicles (ambulances, police, army, minibus) with a
department "marking" of vehicles
Back to homepage
MEISTER COORDINATION CENTER
Rue de la Légende 32 D
4141 SPRIMONT
Tel: 32-(0)43600270 - Fax: 32-(0)43600292
Email: info@poppe-potthoff.com - Web: www.poppepotthoff.com/en/enterprise/locations/meister-coordination-center
Contact person: Mr Ruediger FAUSTMANN
The P + P Group develops and produces technically sophisticated tubes, turned parts and
components for the automobile and utility vehicle sector, as well as for the shipping and
general industries. Poppe + Potthoff is well-known as a specialist for high-pressure tubes and
precision components, in particular for common rail systems – consisting of the common rail
accumulator and –sensors – as well as high-pressure pipes. High precision parts for ABS, ESP
and other applications complete the offerings for the automobile industry.
Ensuring the strictest cleanliness standards
The Meister Coordination Center S.A. is considered the leading international manufacturer
of highly precise turned parts with the full spectrum of modern production technology.
These complex products are developed and tested in part in the company’s own Technology
Center. The range of offerings includes prototypes, pilot production lines, small and
medium-sized production lines.
The Meister Coordination Center has extensive facilities for surface processing with curve or
CNC-controlled turning machines, as well as CNC-controlled automatic production and
testing systems. The highly specialized chain of production and services includes more than
400 machines.
The complex precision components are used, for example, in driving assistance and brake
systems, which are delivered from Belgium to locations across Europe as well as to the USA.
Back to homepage
MICRONEXT
Rue de la Tayette 93
6730 SAINT-VINCENT
Tel: 32-(0)63444647 – Fax: 32-(0)63445024
Email: micronext@skynet.be - Web: www.measure-control.com
Contact person: Mr Etienne D’HOEDT
SPRL MICRONEXT, a public limited company set up in 1982, specializes in the design and
manufacture of measuring and control equipment. It has an in-house design office and a
production unit for prototypes and small series production. This flexible structure has
allowed a network of partners to be developed, enabling the company to adapt in very short
time periods, with a quality standard guaranteed to match its clients’ requests.
SPRL MICRONEXT is involved in the automotive sector, with its windscreen wiper control
apparatus (load gauge and angle measurement device) and in the process automation field,
MICRONEXT carries out design studies and produces tailor-made equipment providing
solutions to its customers’ specific problems.
Back to homepage
MITRACOWALL
Place de la Station 5
6041 GOSSELIES
Tel: 32-(0)89510350 - Fax: 32-(0)89418509 - Mobile: 32-(0)494507666
Email: info@mitracowall.be - Web: www.mitracowall.be
Contact person: Mr Jean-Jacques PETIT
MITRACOWALL specializes in surface treatments relating to specific applications, particularly
those recommended for productions that create additional value, such as: aeronautic
aluminium, carbon composite, honeycomb panels and special metals.
Today we find that the aeronautics, automotive, leisure and other industries show a “nano”
tendency directed towards surfaces that may or may not be from metal, have a coating
which may or may not be organic, but that are, for the most part, highly sophisticated.
This tendency has several reasons which are specific to the various sectors of activity; for
example, in the automotive industry, to embellish chromed surfaces or surfaces of another
nature; in the aeronautics industry, to increase corrosion resistance; in the printing industry,
to protect plates from the laser stings. Thus, in case of a problem, it proves necessary to
reprocess this state of the high-end surface, while preserving not only the configuration of
the part, but also the various layers inherent to very expensive pre-treatments already
applied to the surface. If you are confronted with this problem, keep in mind that
MITRACOWALL has state-of-the-art technology and extensive process know-how to
intervene, using highly ecological methods such as BIOCARB® and BIOCORN®, thus enabling
you to recover your object and the investment of its added value.
These methods have been developed with the support of the Walloon aeronautics industry.
After more than a year of research, we obtained certification for our various processes. The
recognition by this high-tech industry has led us to offer our services to other sectors as well,
while carrying on our research aimed at improving and developing new technologies, which
continues to be the main focus of MITRACOWALL’s strategy.
Back to homepage
MONO BELGIUM CORPORATION
Parc Industriel des Hauts Sarts - Première Avenue 24
4040 HERSTAL
Tel: 32-(0)42569292 - Fax: 32-(0)42569999 - Mobile: 32-(0)475448196
Email: pierre.brissa@mono-group.com - Web: www.mono-group.com
Contact person: Mr Pierre BRISSA
MONO is a group of passionate and highly skilled people devoted to perfection of art and
excellence of service to our customers. Spread in Europe but also in China and in the USA,
Mono Group is a worldwide supplier of state-of-the art car interior decorations.
Noble decors processed with up-to-date technologies are our daily companion. Our car
interior decorations are not only filling our customers with enthusiasm but also with full
satisfaction.
Back to homepage
MORETTE
Zone Industrielle de Martinrou - Rue du Progrès 2
6220 FLEURUS
Tel: 32-(0)71800705 - Fax: 32-(0)71800305 - Mobile: 32-(0)474329055
Email: harold@morette.com - Web: www.morette.com
Contact person: Mr Harold O’CONNOR
How did the twin headlights come about?
In 1977 Mr Morette purchased a Citroën CX, he was at that time a car electrician. The CX was
very well known for its poor lighting and, after smashing the headlights whilst driving during
the night (couldn't see the bend), decided to modify the replacements, using a similar type
of light as the DS (his previous car). On the next service, his local dealer asked him if he could
supply other customers with the modification, as by that time the much more powerful GTI
was on the road, which still had the same lighting problem. So on the 1st of November 1979
the company SAFRI was created (trading as Morette®).
Are there performance advantages or disadvantages with them?
The lighting from our products increases vision at least 30 % compared with the original
equipment lights. The efficiency of a round optic is and always will be better than an Original
Equipment optic that needs to follow the curve of a car BUT the full effect of a twin head
lamp conversion comes when you are driving in full beam, you take the day into the night.
Can it still be legal if you turn one of the holes into a port to get air into the engine?
This is a practice that is used a lot in rallying, but not for the purpose of getting air into the
engine, they use it as an air intake for cooling the break disk. The lights are still road legal.
Is there anything amazing, people should know about Morette? i.e. what they're made of
etc.
People should know that to make a kit to our standard takes around 650 working hours
(3months) in design and development, and all our kits are TUV approved (German standard,
recognised by every country in Europe) and also shortly they will be DOT (standard for the
USA) which explains the price (you get what you pay for). You must have seen our products
on a lot of rally cars, from Citroen Visa, Ford Sierra Cosworth, Escort Cossie, Focus WRC,
Impreza Wrx, etc... Our best seller is still the Peugeot 504, supplied to Africa to be fitted to
the Pick-up, still in production there (good test bench for the resistance). We are supplying
China, even if they are copying our designs (beware of the copies sold under our name or
Morette style), and supply all spare parts for every kit we have produced from day one.
Products






Body kits
Headlights
Mirror covers
Misc
Rear lights
Styling deco
Back to homepage
MOSA FREIN
Chaussée de Waterloo 490
5002 SAINT-SERVAIS
Tel: 32-(0)81733273 - Fax: 32-(0)81738010
Email: mail@mosa-frein.be - Web: www.mosa-frein.be
Contact person: Mr Marc RAWAY
Brakes, servo-brakes and accessories
Back to homepage
MOVENA
Rue Haute 9 Bte 3
1300 WAVRE
Tel: 32-(0)10238580 - Fax: 32-(0)10238589 - Mobile: 32-(0)475701461
Email: info@movena.com - Web: www.movena.com
Contact person: Mr Philippe VAN DAMME
In today's world, violence is anywhere and it is MOVENA's objective to provide security
solutions to organizations like Police forces, Fire brigades and Ambulances.
MOVENA security glass and ballistic panels are commonly used by many Police and Fire
brigade forces across Europe in order to improve the safety of their passengers against all
kinds of threats: riots, urban violence, ammunitions... but they also provide significant sound
attenuation inside the vehicle offering a quieter environment when sirens are on.
In summary: MOVENA provides:
Security glass for automotive and architectural applications:


Impact resistant glass against urban violence.
Armored glass.
Opaque protection :

Ballistic panels made of composite fibers.
Acoustical insulation:

A full package that will insulate the cabin from intensive sirens noise for health
protection.
Back to homepage
NANOCYL
Rue de l'Essor 4
5060 AUVELAIS
Tel: 32-(0)71750380 – Fax: 32-(0)71750390
Email: info@nanocyl.com - Web: www.nanocyl.com
Contact person: Mr Francis MASSIN
NANOCYL is a company founded in 2002.
With a staff of over 45 people, 6 inventions including 51 patents and a constantly increasing
production capacity, NANOCYL has become a leading company in Wallonia and can be proud
to be among the three main world actors in the field of carbon nanotubes. NANOCYL has in
fact become a leading industrial actor following the commissioning in 2010 of a reactor with
a capacity of 400 tonnes per year.
In addition to its carbon nanotubes (NANOCYL 7000), NANOCYL has also developed a range
of new high added value products in polymers, silicones, water, containing predispersed
carbon nanotubes which are sold under the PlastiCyl, EpoCyl, AquaCyl, BioCyl and ThermoCyl
brands.
NANOCYL products are today used in car parts and in the electronics industry where
antistatic properties are required. Fuel lines systems, fuel tanks; body cars fenders are
increasingly qualified by OEM’s to impart electrical conductivity to the part for safety
reasons or to decrease the weight and improve the surface quality of e-painted parts.
Research and development
NANOCYL’s vision is to constantly provide its industrial and university partners with
innovative solutions; this is why the company is involved in very significant R&D activity.
Research has to do with preparing new nanotubes as well as making custom
“improvements” according to the various needs and applications (coatings, functions,
variations in length or diameter, etc.). Development is based on the creation of new
nanotube based products and on existing products optimisation to fit the industry needs.
Back to homepage
NEW ABRACO SERVICES
Rue de la Croix du Maïeur 17
7110 STREPY-BRACQUEGNIES
Tel: 32-(0)64263309 – Fax: 32-(0)64261454
Email: info@abraco.be - Web: www.abraco.be
Contact person: Mr Philippe FIEVEZ
NEW ABRACO SERVICES, a company built on the joint expertise of Abraco and Sodiabel, built
a new operation site in 2005.
ABRACO specialises in contract custom manufacturing of industrial diamond and CBN tools
by galvanic deposition (electrodeposit) and diamond segment welding (sintered products).
Diamond
Our extensive experience designing diamond electrodeposited and sintered tools opens the
door to use of a variety of industrial diamonds (natural, synthetic, borazon) in a wide range
of applications.
Tool
An infinite variety of shapes, sizes, and applications
Services
Our staff is dedicated to providing clients the highest level of quality and designing an
effective solution for each application.
NEW ABRACO SERVICES is a Belgian company based in Strépy-Bracquegnies (province of
Hainaut), in the heart of Europe… and close to our clients.
Back to homepage
NEXANS BENELUX
Rue Vital Françoisse 218
6001 MARCINELLE
Tel: 32-(0)71440440 – Fax: 32-(0)71440563
Email: sales.power-cables@nexans.com - Web: www.nexans.be
Contact person: Mr Alain DE DIER
Worldwide leading expert in the cable industry
With energy as the basis of its development, NEXANS is a global player in the infrastructure,
industry, building and Local Area Network (LAN) markets.
As a worldwide leader in the cable industry, it offers an extensive range of cables and cabling
systems to raise industrial productivity, improve business performance, enhance security,
enrich the quality of life, and assures long-term network reliability.
With an industrial presence in 40 countries and commercial activities worldwide, NEXANS
employs 24,500 people and had sales in 2011 of 7 billion euros. NEXANS is listed on Nyse
Euronext Paris, compartment A.
Infrastructure
NEXANS provides complete cables and cabling solutions for power production, transmission
and distribution. New technologies significantly increase capacity and reduce the danger of
blackouts.
To reinforce rail safety and efficiency, we have products especially designed tor the
demanding railroad environment.
And to meet diverse needs of incumbent and new telecom operators, NEXANS has
customized solutions aimed at lowering capital expenditure and operating costs.
For the world’s busy airports, we offer cables and cabling systems for energy and
communication networks, terminals, baggage handling systems, runway lights, control
towers, etc.
Industry
NEXANS offers a complete portfolio of cables and solutions for market segments as diverse
as the automotive, rolling stock and aerospace industries, shipbuilding, nuclear power, oil &
gas and petrochemicals, material handling and automation.
We add value through advanced technologies and durable high-performance products.
Building
NEXANS supplies cables and network solutions for structures of all types: from small
residences to public and office buildings and big industrial complexes.
NEXANS pioneered fire-performance cables for public safety, created industrial Ethernet
solutions to unite the office and the factory floor platform, and ensured easy recyclability.
From standard products to renewable energy solutions, these products contribute to the
sustainable buildings of the future.
Local Area Networks
NEXANS provides copper and optical fiber cabling systems for new resource-intensive
applications, like Data Centers, Security services, and Storage Area Networks.
NEXANS’ advanced solutions are handling core business data, protecting operations in
sensitive conditions, and giving organizations high-speed transmission and the ability to
protect and retrieve vital information.
NEXANS Benelux
NEXANS Benelux is one of the biggest manufacturers of cables in Belgium. Indeed, it
possesses wide, specialist know-how and is heavily represented in the industrial market.
Besides cables and components, the company also offers turnkey solutions.
Back to homepage
NGK CERAMICS EUROPE
Rue des Azalées 1
7331 BAUDOUR
Tel: 32-(0)65760210 – Fax: 32-(0)65600689
Email: andre.wauters@ngk.be - Web: www.ngk.be
Contact person: Mr André WAUTERS
Catalytic converter for purifying automotive exhaust for cars
HONEYCERAM® has been developed by NGK through extensive experience with ceramics
technology – experience that represents a positive approach in the fight against pollution.
HONEYCERAM® is a porous ceramic with high thermal and impact resistance. It is
manufactured using the latest techniques of precision extrusion to give a honeycomb
structure and superlative strength. It is designed to give a large surface area, facilitating
effective catalytic conversion within a compact design.
HONEYCERAM® is used in catalytic converters all over the globe. More than 300 million
substrates have been manufactured over the past 25 years.
Back to homepage
OPTRION
Rue Chasseurs-Ardennais 4
4031 ANGLEUR
Tel: 32-(0)43615962 - Fax 32-(0)43515968
Email: info@optrion-tech.com - Web: www.optrion-tech.com
Contact person: Mr Daniel SIMON
A company involved in high resolution metrology based on a holographic camera intended
for measuring micro-movements (down to 8nm) of parts and structures (over 1m²):
contactless, full field, vibration analysis, non-destructive testing (internal defects),
characterization (coefficient of thermal expansion, resetting models by finite elements,
stress studies, ...). Strengths of the system: high resolution, fast, works in real time, ease of
use, overall view. Company strengths: responsiveness, short deadlines, R&D possibilities,
expertise.
Research and development
R&D capability
The company has been a partner in 6 European projects. Its speciality is the prototyping of
optical measuring instruments as well as complicated measurement services with regard to
the geometry of complex parts.
Back to homepage
PEGARD PRODUCTICS
Avenue Reine Elisabeth 59
5300 ANDENNE
Tel: 32-(0)85849811 - Fax 32-(0)85849952
Email: info@pegard.com- Web: www.pegard.com - www.harotechnologies.com
Contact person: Mr Jacques BAGUETTE
PEGARD is active in the machine-tool business for more than 50 years and became wellknown in the whole industrial world for its large and precise horizontal boring and milling
machines. Created in 1937 and now a subsidiary company of the group OGEPAR, PEGARD
engineers and delivers tailored solutions for the flexible machining of large precision parts
offered to the customer in a turnkey solution. PEGARD is specialised in the manufacturing of
large horizontal boring and milling machines and machining centres, committed to quality
and performance, for the automated machining of large mechanical parts, such as turbine
rotors, valves, pumps, engine blocks, compressor housings and components for earth
moving equipment… for users demanding ultimate levels of precision.
PEGARD extended since 2008 his production range to vertical turning lathes and more
recently to sharpening machines for hobs, broach tools, slabmills ... (brand name Haro
Technologies)
Subcontracting
Besides its boring and milling machines and vertical lathes, PEGARD offers of course a wellknown after-sales service (works on site, spare parts, preventive maintenance…), the retrofit
of existing machines as well as a machine shop and an electric department able to realize
complex sub-contracting works.
Back to homepage
PHELECT
Rue des Trois Entités 15
4890 THIMISTER-CLERMONT
Tel: 32-(0)87560274 – Fax: 32-(0)87560273
Email: info@phelect.be - Web: www.phelect.be
Contact person: Mr Hubert PINCKAERS
Heavy goods electricity, tachographs installation and repair, speed limiters, GPS, telephones,
radios and satellites, downloading systems for digital tachographs, roller test bench for
tachographs and speed limiters, training for installers of analogue and digital tachographs
and speed limiters.
Research and development
Development of its own roller test bed for tachographs and speed limiters.
Back to homepage
POLMANS
Rue d’Artagnan 14
4600 VISE
Tel: 32-(0)43791371 – Fax: 32-(0)43797000
Email: sa.polmans@polmans.be - Web: www.polmans.be
Contact person: Mr Daniel POLMANS
For more than 35 years, the company POLMANS is active in the field of precision
engineering, especially in the fields of aeronautics, nuclear, defense, medical, steel...
It has been nearly 15 years since the company has also turned in the field of plastic injection.
The company is specialized in the prototypes, single pieces, in small and medium series.
We have about 40 machines on a site covered over 3,000 square meters and a staff of 40
persons.
Back to homepage
POLYONE
Rue Melville Wilson 2
5330 ASSESSE
Tel: 32-(0)83660211 – Fax: 32-(0)83660360
Email: info.color@polyone.com - Web: www.polyone.com
Contact person: Mr Jean-Michel RENKIN
POLYONE is a global supplier of colour and additive master mix based solutions. Our
solutions improve the yield of processes used to finish plastic products in order to meet our
customers’ quality requirements.
Research and development
POLYONE has design centres intended for serving the European market. Its design centres
and specialist laboratories have the latest equipment developed with a view to reproducing
manufacturing conditions. Its design centres enable new products to be launched more
quickly and more effectively.
Back to homepage
PRECICAL
Rue du Tilleul 33
4681 HERMALLE-SOUS-ARGENTEAU
Tel: 32-(0)43749370 – Fax: 32-(0)43749374
Email: precical@precical.be - Web: www.precical.be
Contact person: Mr Alain TROUPIN
Thanks to its integrated conception and design department, PRECICAL can offer a
personalized production process.
The whole process is under the responsibility of one and only person, from conception and
design to the testing of your mould in working conditions.
The mastering of the most recent CAD/CAM software’s allows us to produce high quality,
detailed and accurate plans.
Very high speed electronic links make possible the dynamic exchange of information and
data between PRECICAL and your company.
Back to homepage
PRECIMETAL PRECISION CASTINGS
Chaussée de Mons 89
7180 SENEFFE
Tel: 32-(0)64522000 – Fax: 32-(0)64522010
Email: info@precimetal.be - Web: www.precimetal.com
Contact person: Mr Edward RABENDZKI
Parts from 1 gr to 50 kg, produced by the lost wax process, in all the grades of steel,
including the stainless and various alloys of copper, nickel and cobalt
Besides the automotive and railway transport sectors, PRECIMETAL PRECISION CASTINGS
supplies the following markets:







Aeronautical
Defence industry
Medical material
General mechanics,
Food processing equipment
Transport and treatment of fluids
Building
Research and development
Development of the manufacture of critical parts for aeronautical, medical and general
engineering applications using high-alloy steels
Back to homepage
PRECISION LIEGEOISE
Rue Désiré Janson 59
4040 HERSTAL
Tel: 32-(0)42405760 – Fax: 32-(0)42481179
Email: info@precision.be - Web: www.precision.be
Contact person: Mr Pierre DUMONT
The PRECISION LIEGEOISE is a sub-contractor in precision mechanics (turning, milling 4 / 5
axes, grinding, deep drilling, welding...) which ensures the production of parts in small to
medium-runs and the design - manufacturing - installation of mechanical sub-assemblies,
production and/or control tools.
You have a drawing, a sketch, an idea? Based on the information you provide us, we design
with you complete mechanical machines, mechanical sub-assemblies, tools. When
necessary, we purchase, cut, deep drill the raw material.
Our workshop can meet your needs in:






precision turning digital, conventional, vertical, Mastercam network CAM
precision milling on CNC 3, 4, 5-axis continuous machines Mastercam network CAM
plane and cylindrical grinding
deep drilling, stellitage, welding, honing, polishing
mechanical sub-assemblies and special tools mounting
metrology in air-conditioned room, 3D CNC measuring, reports, certificates according
to your specifications, integration into your quality system
In addition, we manage the majority of heat treatments, chemical spray..., and we assure
ourselves the pickup and delivery of your rush orders.
Back to homepage
PRECIS SELECT
Parc Industriel 1
7170 MANAGE
Tel: 32-(0)64521220 – Fax: 32-(0)64521221
Email: thierry.plotton@preciselect.com - Web: www.preciselect.com
Contact person: Mr Thierry PLOTTON
Combining an innovative conception together with a unique to the world process, we offer
you customized solutions for your projects in calibration and separation of all kind of
powders and ultrafine materials.
Back to homepage
PROCOPLAST
Schnellewindgasse 17
4700 EUPEN
Tel: 32-(0)87595090 – Fax: 32-(0)87595099
Email: procoplast@procoplast.be - Web: www.procoplast.be
Contact person: Mr Geoffroy BOONEN
PROCOPLAST is a plastic injection company. Its core business is based around tool
manufacture and the production of complex parts in long runs (2 component injection and
over-moulding of metal/electrical parts) on automated production lines. PROCOPLAST
operates in the automotive, electrical and electronics sectors as a main Tier One Supplier.
PROCOPLAST can help you with all aspects of an injection project (complex parts with fine
tolerances or ones that require automated production). We have CAD programs and use a
sophisticated quality management system. PROCOPLAST is ISO 9001, ISO 14001 and TS16949
certified. Constant innovation is all-pervasive and offers the best return to our customers.
We specialize in the following types of products:
• Over-moulding injection of contacts:
- Sensor boxes (airbags), electrical connectors.
- Housing for locks.
• Connection of various components:
- Brush holders for electric motors.
- Electronic boxes for accelerator pedals.
• Injection of plastic parts with extremely fine tolerances.
• Parts assembly.
Main customers: Bosch group, Kiekert, Hella…
Back to homepage
PROCOTEX
Rue Théodor Kluber 8
7711 MOUSCRON
Tel: 32-(0)56483838 – Fax: 32-(0)56484351
Email: info@procotex.com - Web: www.procotex.com
Contact person: Mr Bruno DOUCHY
One thing is sure, Belgium is well known for two famous industries:
1. It's the world centre of the highest standard quality linen fibres for more than 3.000
years. PROCOTEX is geographically situated at the heart of the linen growning area,
where it is active in :
Trading of flax fibres for all industries all over the world: long scutched flax, rescutched
tow and hackled tow for traditional textile industry, paper industry, automotive
industry, etc...
Producing of prepared flax fibres for the spinning industry, produced in the delocalised
unit of Linolitas in Lithuania:
• Combed sliver for traditional half-wet flax spinning mills
• Combed sliver for the blending market (with PES, wool, etc...)
• Carded sliver
• Cotonised fibres for the blending market (with Coton, Rayon, etc...)
2. Belgium is the second biggest carpet producer in the world. PROCOTEX is the innovative
recycler company of all fiber wastes related to that industry such as PP, jute, PES, PA
wastes... Besides that, PROCOTEX is also serving the same carpet industry by helping it
to sell its second-hand equipment and stocklot yarns.
Back to homepage
PRODUCT ENGINEERING SERVICES
Zone Industrielle de la Rivierette 65
7330 SAINT-GHISLAIN
Tel: 32-(0)65764040 – Fax: 32-(0)65764049
Email: pes@pes-sa.com - Web: www.pes-sa.com
Contact person: Mr René DEMARBRE
PRODUCT ENGINEERING SERVICES S.A. provides complete robotics related services to equip
most industrial robots. Its activities are mainly directed to the automotive sector, but also to
industry in general.
In order to produce these robotics solutions, PRODUCT ENGINEERING SERVICES relies on the
skills of its international partners and incorporates the following products:
•
•
•
•
•
Machining, de-burring spindles. Partner: AMTRU.
Tool changers (grippers, welding clamps). Partner: Applied Robotics.
Collision sensors. Partner: Applied Robotics.
Pneumatic, hydraulic and electric rotary joints. Partner: DSTI
Grippers, rotating units, pneumatic components for robots. Partners:
Tecnomors, NKE, Zaytran.
Research and development
PRODUCT ENGINEERING SERVICES S.A. relies on a team of 10 staff, all concentrating on
supplying customers with the solutions best suited to their needs in terms of robotics related
components.
Back to homepage
RECTICEL
Zoning Industriel de Fleurus - Avenue du Marquis
6220 FLEURUS
Tel: 32-(0)71489252 – Fax: 32-(0)71489351
Email: strazzante.claudio@recticel.com - Web: www.recticel.com
Contact person: Mr Claudio STRAZZANTE
The automotive business line includes the following two activities:
Recticel Automotive which develops, produces and commercialises interior solutions
(dashboard skins and door panel trim) on the basis of the unique, certified Colo-Fast® spray
technology
Proseat (a 51/49 joint venture between RECTICEL and Woodbridge) which produces seating
pads in cold moulded foam
In addition, there is still the small Exteriors division which mainly concentrates on the
production of the light-stable polyurethane raw material Colo-Fast® (compounds) that is
primarily used in the automotive division today.
RECTICEL AUTOMOTIVE
RECTICEL car interiors are extremely long-lasting and resilient, and an inspiration during the
whole life of a vehicle. Many years of experience and confirmation in serial production are
reflected in our components visible in the finest details. Even smalles radii or light-coloured
surfaces can be produced with a high level of quality, thus setting the base for sophisticated
interiors of perceptible perfection and functional durability.
Colo-Fast® is the base material for all interior components manufactured by RECTICEL
Automotive. As a result of a continuously improved production process and for the need to
respond to the permanently increasing demands in the automotive market, Colo-Fast® as
patented material has proven its excellence over many years, always setting standards for
high quality automotive components and thus gaining a leading position in the market. ColoFast® delivers an optimal performance for sophisticated interiors in terms of color, grain,
function and dimensional stability. The advancement of Colo-Fast® provides a weight
reduction of 25 % compared to thermoplastic slush skin. With Colo-Sense® Lite weight
reduction will be even more than 35%. The current status of development is the creation of
comfort foam with low density and partially thinner foam layers maintaining its material
properties.
The various components require dedicated production processes:



Spray technology in monotone and multi-tone
Reaction injection molding (RIM)
Reaction injection overmolding (ROM)
STRATEGY AND PROSPECTS: SHAPING THE FUTURE
INTERIORS: Stabilisation and improving cost-effectiveness
Over the last fifteen years, Recticel Automotive (previously known as Recticel Interior
Solutions) has made an important contribution to the growth of the automotive business
line with its unique patented Colo-Fast® spray technology.
As a consequence of the current, serious economic crisis which hit the automotive industry
hard, RECTICEL has had to adapt its ambitions for this sector. The revision of the original
plans was dictated by the considerable structural degree of risk of the Automotive business
line in the long term on the one hand and the extremely capital intensive character of these
activities on the other. Therefore the Group further modified its position with regard to the
automotive business line in the strategic practice of last year.
Unlike in the past, the focus will no longer be on growth. In the short term, attention will be
focused on maintaining existing market positions, expansion to China and improving global
cost-effectiveness as priorities.
SEATING (PROSEAT)
The seating division which runs via the joint venture Proseat is also heavily exposed to the
new developments of the market. One of the most important challenges for this division
involves coming up with a suitable response to the increasing trend for insourcing among
suppliers in the automotive industry.
The production and commercialisation of pre-moulded solid foam seating for the
automotive industry has already been assured by the joint venture Proseat for a number of
years. RECTICEL has 51% control of Proseat and the Woodbridge (Canada) group has 49%.
Today it can be stated that Proseat, with its nine production plants spread over seven
countries, is one of the biggest independent producers of seating for the European
automotive industry. In addition to seating, Proseat also manufactures other seating
components such as headrests, armrests and side panels for car seats.
Back to homepage
RECTILUX
Grand’Rue 103
6724 MARBEHAN
Tel: 32-(0)63411115 – Fax: 32-(0)63411000
Email: info@rectilux.be - Web: www.rectilux.be
Contact person: Mrs Françoise ANTOINE
Rectification of any engines gasoline and diesel
- All the engines
- Jacketing, bore and honing
- Brace rectification
- Cylinder head
- Works in connecting rods, line of shaft of bearings and camshaft
- Injection gasoline and diesel
- Turbo
- Brakes and clutches
Back to homepage
RECYCAR
Rivage de Boubier 25
6200 Châtelet
Tel: 32-(0)71243850 - Fax: 32-(0)71394281
Email: recycar@swing.be - Web: www.groupecomet.com
Contact person: Mr Philippe GROSJEAN
The wide variety of activities undertaken by the Comet Group make it a centre for
environmental excellence on its reference markets: ferrous and non-ferrous scrap metals,
end-of-life vehicles, electrical and electronic equipment waste, household and industrial
packaging, tyres, plastic, shredding waste, etc.
End-of-life vehicles – or scrap vehicles – need environmental processing to avoid
environmental contamination or harm to human health caused by their various components.
With this in mind, the authorities have developed a network of accredited companies which
carry out the environmental processing of end-of-life vehicles.
These operations consist of three stages:



Depollution of the end-of-life vehicle: removal of any harmful components and fluids
from the vehicle: fuel, oils, oil filters, batteries, etc.
Dismantling of the end-of-life vehicle: operation aimed at dismantling certain parts
either for subsequent usage (as a part in its own right – door, engine, gearbox, etc.)
or for its recycling (tyres, exhaust, etc.).
Shredding of the end-of-life vehicle: shredding releases the various remaining
components in the vehicle for subsequent recycling as a secondary raw material:
iron, metals, plastics, minerals, etc.
Only the successful completion of these stages in the processing of scrap vehicles guarantees
effective and environmentally-friendly recycling.
RECYCAR and the COMET Group offer a comprehensive solution for processing end-of-life
vehicles:




For partners responsible for the management of a range of end-of-life vehicles.
For accredited demolition companies seeking to legally continue their parts reselling
business, which can clean up end-of-life vehicles prior to dismantling and any parts
sales.
For depollution and dismantling centres seeking a recycler enabling greater
processing of end-of-life vehicles than they would be able to deal with
(COMETSAMBRE).
For shredders seeking to process their shredding waste (COMET TRAITEMENTS).
Back to homepage
REFRICAR
Zone Industrielle des Hauts-Sarts - Rue de l'Abbaye 140
4040 HERSTAL
Tel: 32-(0)42483417 – Fax: 32-(0)42482541
Email: info@refricar.be - Web: www.refricar.be
Contact person: Mr Thierry GAUDE
Cooling and air-conditioning of utility and other types of vehicle
Modifications and customization
Back to homepage
RESSORTS RENSON
Rue Sabaré 120
4602 CHERATTE
Tel: 32-(0)43456770 – Fax: 32-(0)43622454
Email: j.boden@mecaressort.be - Web: www.ressorts-renson.be
Contact person: Mr Jos BODEN
RESSORTS RENSON SA has been in operation since 1932.
Our field of activity is the production, in small, medium and large series of:






Compression springs
Traction springs
Torsion springs
Parts with cut-out and cambered shapes
Flat or rounded diaphragms
Cutting washers and shaped parts
Efficient and responsive
Our stock of machines is one of the largest and most effective in the sector. Combined with a
know-how based on incomparable experience, this technical infrastructure enables us to
provide fast, creative and competitive solutions.
RESSORTS RENSON is located in Cheratte (nr Liege, Belgium), in buildings with a surface area
of over 3,000 m². With a direct link to motorway and flight networks, this location gives us
unequalled logistical flexibility.
Constancy in diversity
Our clients operate in a wide variety of fields: automotive, domestic electrical appliances,
lighting, telephony, hatches, gas, hydrogen…
Whatever their activity, we work closely with every client in an atmosphere of mutual trust.
Every order is monitored closely, from initial inquiry and quote submission to final delivery.
The ERP IT system at RESSORTS RENSON enables us to optimise traceability.
Our core business
Our core business involves cold working with 0.10 mm to 14 mm wire made from Steel,
Stainless Steel, Bronze, Beryllium Copper, Inconel, Monel, etc., mainly with round section
but also with square or rectangular sections.
RESSORTS RENSON is constantly striving to meet your most specialist requirements. The
demanding nature of your requirements guarantees a continually updated know-how on our
part, honed by cutting-edge technologies.
At the client’s request, we make prototypes to validate project development.
Back to homepage
RIOGLASS BELGIUM
Avenue de l’Espérance 58
6220 FLEURUS
Tel: 32-(0)71822555 – Fax: 32-(0)71822550
Email: rioglass.belgium@rioglass.com - Web: www.rioglass.com
Contact person: Mrs BUSCEMI
Created in 1992 in Spain, RIOGLASS is a private-owned glass maker, independent from any
large glass groups.
After initially having supplied short and medium run vehicle manufacturers, RIOGLASS has
become a significant player in the European automotive glass market. We are certificated by
major car manufacturers and have ISO TS 16949 and other automotive standards. By
developing our own products, tools and even some manufacturing equipment, we can
service the automotive industry with great flexibility in glass manufacturing from our plants
in Spain and France.
Among the RIOGLASS facilities, Mieres and Bagneaux-sur-Loing sites are especially dedicated
to automotive industry and are capable of providing car manufacturers with a large
production capacity in tempered and laminated glass.
The Bagneaux-sur-Loing plant, installed in 2006, is equipped with fully automatic production
lines for backlights and sidelights. Additionally, an “added value unit” enables us to “dress”
glass parts by fitting a large variety of accessories, in order to provide complete subsets
which can be directly integrated onto car bodies, as requested by car manufacturers for their
present or future projects. This line is made up of independent workshops that utilize
technologically advanced equipment and tools for applications such as extruded rings for
waterproof seals, attachments of stop light brackets, moisture and light sensors, as well as
locator pins, spacers and other fittings.
The first RIOGLASS Plant was built close to La Rioja capital city (Spain) and was dedicated
from the very beginning to supply specialty glasses for a variety of vehicles such as buses, rail
and tram cars, construction plant, micro cars, and many other types of small series vehicles.
RIOGLASS is the world leader in short runs product development.
RIOGLASS professionals are fully committed to ensuring Quality and Service to customers at
all levels of development, production and marketing. Plants are equipped with
technologically up-to-date tools that allow sophisticated measurements of all aesthetic,
optical and physical criteria. Beyond this equipment, Quality commitment is strongly
supported by RIOGLASS staff skills, throughout the Group. Daily, they contribute to provide
our customers with products that fully meet their requirements and demands.
Back to homepage
R.TEC RACING TRADING ENGINEERING AND CONSULT
Zone Industrielle d’Heppignies - Zone II - Rue de Capilône 1
6220 HEPPIGNIES
Tel: 32-(0)71377707 – Fax: 32-(0)71377708
Email: info@rtec.ws - Web: www.rtec.ws
Contact person: Mr Fabio LAZZERINI

Design, fabrication development and rebuild of Shock absorbers for special vehicle
application
o armoured vehicles and jeep
o Circuit, rally, raid motorsport vehicle suspension
o Reinforced vehicle suspension


Manufacture of prototype vehicles (special and competition cars)
Engine testing and calibration

Research and development
o Shock absorbers
o Prototype vehicles
o Engine development
Main customers: Carat Duchatelet, Centigon, Gilet Automobile, Fiat Auto Corse (Abarth, N
technology), Overdrive, WR Audi, Peugeot Sport, Citroën Sport, Renault Sport
Back to homepage
SADAPS BARDAHL ADDITIVES & LUBRICANTS
Rue du Mont des Carliers 3
7522 BLANDAIN
Tel: 32-(0)69590360 – Fax: 32-(0)69590361
Email: dleplat@bardahlfrance.com - Web: www.bardahlfrance.com
Contact person: Mr Dominique LEPLAT
ISO 9001 and ISO 14001 certified company specialising in chemical and oil products for the
motor industry, industry, DIY and the motorbike industry such as: additives, oils, fuels and
cooling systems, special lubricants, maintenance products for industrial and car workshops,
windscreen washer fluids, coolants, maintenance and air-conditioning products.
Research and development
•
•
Laboratory with 3 chemists.
Products developed: windscreen washer fluids, oil and fuel additives, car
maintenance products.
Back to homepage
SAINT-GOBAIN GLASS BENELUX
Rue des Glaces Nationales 169
5060 AUVELAIS
Tel: 32-(0)71261211 – Fax: 32-(0)71261293
Email: claude.deniet@saint-gobain.com - Web: www.saint-gobain-vitrage.com
Contact person: Mr Claude DENIET
Saint-Gobain Vitrage manufactures, processes and sells glass products for many different
markets: the car and transports industries, the building trade, the furnishing, the electrical
goods and the electronics industries.
Saint-Gobain Vitrage is the designation of the Flat Glass Division of the Saint-Gobain Group.
The Flat Glass Division manufactures, processes and sells glass products. Our markets and
our customers have governed the organisation of the Group into four units:
Saint-Gobain Glass, specialising in the manufacture of basic glass products: from float glass
to high-performance products also including mirrors, printed glass and laminated glass.
Saint-Gobain Glass Solutions, a network of companies dedicated to the building trade,
processing, distributing and installing glass for numerous applications.
Saint-Gobain Sekurit, a leader in the car and transports industry sectors, whom they supply
with functional glass (visual, thermal and acoustic comfort; anti-ejection and anti-burglary
security) assembled on the automotive constructors lines.
Saint-Gobain Specialities covers the electronics and electrical goods industries, from
commercial refrigeration to fire protection and nuclear safety.
Back to homepage
SERVIPLAST
Rue du Marché Couvert 42
6600 BASTOGNE
Tel: 32-(0)61240670 – Fax: 32-(0)61240671 – Mobile: 32-(0)495246092
Email: info@serviplast.be - Web: www.serviplast.be
Contact person: Mr Philippe MARTIN
SERVIPLAST: plastic injection and assembly
Today SERVIPLAST is a cooperative company with a social purpose, essentially active in
assembly and plastic injection.
In this sector, SERVIPLAST is positioned as a main partner for any company that is developing
an idea or project for which the production of a plastic part is essential.
SERVIPLAST becomes the project manager for the application under development and
actively participates in the design and production of the desired product. Its services
therefore cover various upstream and downstream phases, such as preliminary studies and
project validation, parts design, the design and manufacture of the injection mould, injection
and pre-production, finishing (painting, printing, hot marking...), not forgetting assembly and
packaging.
Motivated by the desire to create a product that meets the customer’s expectations,
SERVIPLAST is involved in all types of project. Each stage is validated and discussed in close
collaboration with the various participants. Adaptation to technological developments
through constant and targeted investment means that the company is able to ensure a high
degree of rigour under the control of a total quality process (the company is certified by
Veritas - ISO 9001 and ISO 14001).
Research and development
SERVIPLAST works in close collaboration with tool consultants as well as with SIRIS and
competence centres specializing in special techniques.
Back to homepage
SETTAS (DONCASTERS) - SOCIETE EUROPEENNE DES TECHNOLOGIES
DU TITANE ET DES ALLIAGES SPECIAUX
Zone Industrielle - Allée Centrale 36
6040 JUMET
Tel: 32-(0)71919210 – Fax: 32-(0)71345611
Email: setsales@doncasters.com - Web: www.doncasters.com
Contact person: Mr Axel LUCKOW
DONCASTERS Group Ltd is a leading international engineering group that manufactures
precision components and assemblies for the aerospace, industrial gas turbines, specialist
automotive, petrochemical, construction, industrial, transportation and recreation markets.
The group excels in working with alloys and metals that are difficult to shape and form.
DONCASTERS possesses many unique industry leading technological and manufacturing skills
that are very highly regarded by our customer base. We are in virtually every respect global
leaders in aerospace, industrial gas turbines, automotive turbochargers, fasteners and super
alloys. All are household names within their respective industries and highly demanding as
regards problem solving, time to market delivery, costs and through life support.
Leveraging the synergies of our super alloy manufacturing, casting, forging, fabrication,
machining and assembly capabilities, DONCASTERS is in a unique position of being able to
offer an in-house, vertically-integrated Supply Chain solution for our customers.
In automotive the company is a leading supplier of turbocharger components to
BorgWarner, Holset, Honeywell and IHI as well as fasteners and stampings to the likes of
General Motors, Volkswagen and Audi. We also supply a range of specialist fasteners, gear
components and assemblies to civil, military and commercial customers across the
transportation field.
Back to homepage
SHUR-LOK INTERNATIONAL
Parc Industriel
4800 PETIT-RECHAIN
Tel: 32-(0)87320775 – Fax: 32-(0)87320712
Email: bforet@shur-lok.com - Web: http://shur-lok.com
Contact person: Mr Bertrand FORET
SHUR-LOK INTERNATIONAL S.A. was founded in 1965 to design and manufacture fasteners
for the European market. Built in 1988, the present 43,000 sq. ft. (4,000 sq. meters) facility is
in Petit-Rechain, Belgium. Centrally located to satisfy the requirements of the dynamic
European aerospace community, SHUR-LOK INTERNATIONAL is fully staffed and equipped to
design, manufacture and support the sale of SHUR-LOK products
Innovative fasteners for special applications
When ordinary fasteners won't do, SHUR-LOK is an extraordinary resource. An experienced
engineering team specializes in advanced technologies, consistently exploring new structural
materials and solving the toughest application problems. SHUR-LOK has numerous firsts and
patents to its credit, and many of its products have gone on to become industry standards.
SHUR-LOK welcomes custom design challenges as an opportunity to push the envelope and
create the standards of tomorrow.
SHUR-LOK fasteners and components are designed to satisfy customer requirements in two
general application ideas: secondary structures, such as interior stow bins, lavatories and
galleys, and primary structures, such as aircraft engines, engine pylons, landing gears, wings,
gearboxes, transmissions and helicopter rotors--all critical applications.
Back to homepage
SIMA
Boulevard Industriel 99
7700 MOUSCRON
Tel: 32-(0)56856200 - Fax: 32-(0)56856201
Email: sima@sima.be - Web: www.sima.be
Contact person: Mr Kurt HAVEGEER
The SIMA-SACA group produces a variety of products connected with paint processing and
surface treatment.
SIMA is a leading manufacturer, at an international level, of spray- and drying booths for
body shops and industrial painting lines.
Quality and reliability are the major features of the SIMA spray booths. SIMA products are CE
and TUV approved as well as recommended by prestigious automobile manufacturers and
paint companies.
The purpose of this catalogue is to give you a visual impression of SIMA's expertise offered in
different applications.
Back to homepage
SIMONIS PLASTIC
Rue Bonne Fortune 102
4430 ANS
Tel: 32-(0)42398833 - Fax: 32-(0)42398831
Email: info@simonis-plastic.be - Web: www.simonis-plastic.be
Contact person: Mr Luc SIMON
SIMONIS PLASTIC is an industrial partner




Project manager specialising in the transformation of polymers by injection
Equipped with an efficient injection shop, complementary activities and purposebuilt environment for the manufacture of engineering products and microsystems
With a multi-disciplinary team for research on innovative solutions customized to the
client's requirements
Contributing a great competence and added value to projects developed in
partnership with the client
SIMONIS operates in the field of plastics processing, and works for the automotive industry.
It makes specific products such as trim panels or inflatable seals in small and medium-size
production run. The speed of action and the responsiveness of the personnel enable it to
provide quality products. In addition, its twenty years’ experience in the field of civil
engineering enables SIMONIS Group to work for the largest companies in this sector. The
Group is thoroughly familiar with all the materials it uses, and handles the conversion of
metal to plastic. It is capable of producing in very small series, providing a high-quality
service corresponding to the specific requirements of the sector.
Back to homepage
SIMTECH
Rue de la Grande Couture 14
7503 FROYENNES
Tel: 32-(0)69889670 - Fax: 32-(0)69889677
Email: pascale.malice@simtech.be - Web: www.simtech.be
Contact person: Mrs Pascale MALICE
For you, Racecar manufacturers, SIMTECH designs, manufactures & supplies custom-made
flexible fuel tanks (FIA approved) & comprehensive accessories around the fuel cells.
Our flexcell® range of products include flexible cells for the storage of any kind of liquids
(water, potable water, fuels, etc.). Our fuel cells can be designed for the most aggressive
fuels; we also offer turnkey solutions with integrated accessories: fuel pumps, level sensors,
filters, inner catch-tanks, wiring, filler caps, vent valves, filler hoses, etc.
We offer a special confection integrated into composite body shell for volume optimization,
light weight & ease of use.
For you, Defence Vehicle manufacturers, SIMTECH manufactures complete fuel tanks with
fuel-leakage tank protection on OEM tanks with self-sealing properties in case of bullet
perforations. The complex self-sealing sandwich can be applied on various tank materials:
PE, aluminium, glass fibre or other composite materials...
For you, Automotive Glass manufacturers, SIMTECH also designs & manufactures
comprehensive custom-made laminating solutions within its flexlam® range of products
including reusable vacuum bags for the laminating process of windshields & other
automotive glass (sidelights, panoramic sunroofs...), our products are designed to suit your
laminating process.
Should you require any custom designed fuel cells or reusable vacuum bags for your
laminating process, we will be pleased to receive your requirements.
Back to homepage
SKYNAM
Rue des Anciens Combattants 1
5032 MAZY
Tel: 32-(0)81408689 – Fax: 32-(0)81408683
Email: info@skynam.com - Web: www.skynam.com
Contact person: Mr Stéphane BEAURAING
Electronic technology for the car and transport sector, an SPRL with capital of 50,000 euros,
8 staff, 20 years of R&D and manufacturing, technical support and after sales service
experience.
Activity: design, prototyping and manufacture of electronic microprocessor boards,
development of operating software for these systems and PC software for configuring and
managing these systems.
Private clientele, replacement and manufacturers parts
Research and development
• Petrol and diesel engine Electronic Control Units (production and competition).
• Hybrid traction supervisors.
• Electronic exhaust management, particle filters and pollution control.
• Data recording.
• Fleet management and control.
• Custom developments.
Back to homepage
SOCIETE COMINOISE DE MAILLE INDUSTRIELLE (SOCOMAILLE)
Avenue des Châteaux 7
7780 COMINES-WARNETON
Tel: 32-(0)56561200 - Fax: 32-(0)56556121
Email: laurence.vanhove@socomaille.be - Web: www.socomaille.be
Contact person: Mrs Laurence VANHOVE
SOCOMAILLE had been knitting jersey and interlock as supports for coating. Most of these
coated fabrics are destined for the automobile industry (lining of seats and inside body
roofs) but also for the luggage and garment industries.
As time went by, SOCOMAILLE added ranges of jersey fitted sheets to its product range,
directing itself towards the household linen market. In this area, the company’s annual
capacity is well over one million fitted sheets.
From cotton, polyester/cotton, 100% polyester and polyamide, the supports are knitted on
circular knitting machines. The company, which is fully integrated, carries out all the finishing
work such as dyeing, heat setting, compaction, the different forms of stentering, etc. With
respect to supports for industry, SOCOMAILLE makes over 100 tonnes of finished pieces of
knitted fabric per month.
Back to homepage
SPEED-UP – P-TRONIC
Préfayhai 33 D
4900 SPA
Tel: 32-(0)87305670 - Fax: 32-(0)87305671 – Mobile: 32-(0)487528358
Email: philippe@ptronic.com - Web: www.ptronic.com
Contact person: Mr Philippe HEEREN
P-Tronic manufactures and markets additional electronic performance chip which improve
the performance of all types of diesel-engined and petrol vehicles equipped with a turbo:
TDI, CDI, HDI, JTD, CRDI, D4D, DTI, TDCI, D, TDS, SDI, DCI, TD, TID, DES...
These plug-in power engine tuning enable power to be increased by 25 % and torque by 35%
on average, in perfect safety, while also decreasing fuel consumption by around 15% and
lengthening the life of the engine.
Equipped as standard with connectors identical to those of the car manufacturers, the
additional P-Tronic box-units engine tuning are fitted in just a few minutes without any
experience at all being required. Recognised for their quality, P-Tronic box-units are
guaranteed 5 years and have received European TÜV certification.
Back to homepage
SYREG
Avenue de la Résistance 188
4630 SOUMAGNE
Tel: 32-(0)43771052 – Fax: 32-(0)43776933
Email: info@syreg.com - Web: www.syreg.com
Contact person: Mr Eric COLLAS
SYREG’s basic product is SYRMGC. This is a versatile and multi-function module for
measuring temperature, acceleration and has a 0-10V input. It manages digital I/O controls
and outputs an analogue 0-10 V voltage and a current of 0-20 mA that can be programmed
according to the sensors. Overall supervision is via an application integrated into the
module.
SYREG has developed the following derivative products:
• GERAF which provides centralized management of heating depending on the occupation of
the premises with remote supervision via the Internet.
• TGMAC which controls the real time operation of industrial machines (drills, cutters, etc.).
In this way, it offers a management tool for improving productivity.
• GEDIR which optimizes boiler regulation circuits controlling the three-position valve.
Settings can be configured via a graphical interface.
All the products developed can be connected via a cabled network or by radio frequency.
They send and recover data via a LAN network or WIFI.
SYREG has developed the following graphical products:
• Graphical programme for displaying the configuration of the SYRMGC module with a
summary of measurements and digital controls via the network.
• A programme to configure time slots depending on occupation of the premises.
• A programme to give details of the heating of a building with a graphical display showing
temperature changes, window opening, heating times, fuel consumption, etc.
• A programme displaying machine tool production via a histogram with preventive
maintenance and management of workers depending on the machine.
• A programme to display a graph of boiler room regulation.
Research and development
R&D is a permanent feature at SYREG, meaning that products can be developed rapidly
according to needs. SYREG is developing specific application programmes for its products. In
the case of the SYRMGC, GERAF, TGMAC and GEDIR products, the application is incorporated
into the module and run from a web browser.
Main references
The electricity companies use SYRMGC modules for sending and recovering data concerning
the management of electrical control consoles.
GERAF modules equip several local authority buildings, hotels and retirement homes and are
used for centralized management of central heating and air-conditioning systems according
to the occupation of the premises.
TGMAC modules equip several engineering companies and are used for monitoring
production in order to improve productivity.
Back to homepage
T&B CARBON MANUFACTURING
Parc Industriel des Cahottes - Chemin des Moissons 12
4400 HORION-HOZEMONT
Tel: 32-(0)43689460 – Fax: 32-(0)43689560 – Mobile: 32-(0)475858255
Email: sales@tb-carbon.com - Web: www.tb-carbon.com
Contact person: Mr Georges TONET
T&B CARBON MANUFACTURING is a leader in the creation and production of high quality
carbon and wooden laminated parts for car interiors.
The quality of our products satisfies the demanding owners of the world’s most exclusive
motorcars. T&B has developed extensive product lines for the likes of Ferrari, Lamborghini
and Porsche. We also produce products for non-automotive fields including computer
accessories, cigar lighters and household goods.
T&B is a wholesale and retail manufacturer that can handle any size job from small, single
item custom work to large production (20 cars per week) runs. Our computerized ordering
and production process ensure smooth communication and on-time delivery of all orders.
Please contact T&B's European sales office in Belgium.
All logos (ie: Porsche, Ferrari, and Lamborghini) used are for information purposes only, and
T&B is in no way affiliated with the respective companies.
Back to homepage
TAILORED BLANK LIEGE – ARCELOR MITTAL GROUP
Rue de l’Avouerie 7
4000 LIEGE
Tel: 32-(0)42545050 – Fax: 32-(0)42545060
Email: info@cstb.be - Web: www.tbliege.be
Contact person: Mr David MAERTENS
Active in cutting shaped, rectangular and trapezoids blanks for structural or visible parts of
cars.
A 1.250 T mechanical press and Fimi line, with a maximum width of 1.850 mm for high grade
steel.
Fagor 2.500 T hydraulic press for hot rolled steel
Back to homepage
TECHNOVAL
Rue de la Station 25
4340 AWANS
Tel: 32-(0)42634558 – Fax: 32-(0)42638115
Email: info@technoval.be - Web: www.technoval.be
Contact person: Mr Francesco LIPAROTI
General mechanical construction and precision construction
Finishing: lathe work, milling, grinding, boring, threading...
Study and production of:



Industrial machines and equipment’s.
Mechanical and welded units.
Hydraulic and pneumatic systems.
Manufacturing of injection moulds.
Surface treatments:




Exothermic projection.
Ultrasonic projection.
Electric welding.
Plasma welding.
Preventive assisted industrial maintenance.
Back to homepage
TECNOLON WORKS
Rue du Forest 5
7700 MOUSCRON
Tel: 32-(0)56857548 – Fax: 32-(0)56857549 – Mobile: 32-(0)476992366
Email: tecnolon@tecnolon.com - Web: www.tecnolon.com
Contact person: Mr Geoffrey DUCROCQ
Know-how in precision
Since several decades, TECNOLON WORKS controls the perfect machining of various
mechanical tools and components for all kind of industries. In order to achieve this goal,
TECNOLON WORKS makes use of machines of the last generation.
Production of injection moulds
Production of injection moulds for plastics for more than 40 years, very competitive
machines and equipment’s, all kinds of production or modifications of injection moulds are
possible thanks to our engineering department, equipped with the most modern soft- and
hardware.
First out-of-tool series can be provided.
Back to homepage
TECNOLUB
Zur Kaiserbaracke, Recht 4
4780 SAINT-VITH
Tel: 32-(0)80679559 - Fax: 32-(0)80678346 - Mobile: 32-(0)475620539
Email: j-m.bricteux@tecnolub.be - Web: www.tecnolubsystem.com
Contact person: Mr Jean-Marc BRICTEUX
Are you searching for a specialist in industrial lubricants and high-performance solutions for
micro-lubrication and/or processing of metal turnings?
TECNOLUB is a company specialising in consulting, analysis, design, construction and
implementation in the following fields:



Industrial lubricants
micro-lubrication
treatment of metal turnings
Since 1988, TECNOLUB has been developing global concepts both for and with its clients,
always with respect for mankind and the environment.
TECNOLUB offers durable solutions with state of the art technology.
TECNOLUB proposes a range of micro pulverising systems, adapted to different applications.
A number of specialised press articles showing case studies where TECNOLUB’s micropulverising systems have proved their high level of performance.
Back to homepage
THERMIBEL
Zoning Industriel - Pavé du Roeulx
7110 STRÉPY-BRACQUEGNIES
Tel: 32-(0)64671500 – Fax: 32-(0)64671512
Email: info@thermibel.be - Web: www.thermibel.be
Contact person: Mr Raymond MARIN
THERMIBEL... a high quality degree
THERMIBEL has been manufacturing electronic temperature sensors (thermocouples,
Pt100...) since 1983.
The factory has a surface area of 1800 square meters located in Strépy-Bracquegnies 50 kms
south of Brussels. It employs 21 people. Click here to view the map.
In the last few years, THERMIBEL has been working with several European partners (Beamex,
Isotech, Inor, ASCON, OMET) and is now benefiting from this experience in the European
Market.
THERMIBEL is well known in Belgium as well as in Cuba; in both countries we are the main
producer. We are currently expanding our activities in different parts of the world.
THERMIBEL has ISO 9001:2008 and ATEX certification.
We also have our own calibration lab for temperature sensors from -80°C to +1300°C. This
lab has got its ISO 17025 certification by BELAC under the number 139-CAL
Our on-going investment strategy allows us it to remain very competitive, particularly
regarding quality and price.
We are present in miscellaneous industry segments (aeronautical maintenance, chemistry,
engineering turnkey solutions, foundries, glassworks, incinerators, iron and steel works,
nuclear, petrochemical, railway, automotive, pharmaceutical, etc.) and we can offer
solutions to most problems of temperature.
Back to homepage
THISE
Rue Neuville 17
4690 BOIRS
Tel: 32-(0)42861470 – Fax: 32-(0)42864889
Email: martine.marchal@thise.be - Web: www.thise.be
Contact person: Mrs Martine MARCHAL
Since two generations, we endeavour to meet the requirements of our customers by
improving our quality unceasingly. Personnel highly qualified, conscientious and tested as
well as equipment with the ridge of technical progress guarantee to us a honourable place
within the market of the mechanics of precision.
Our products result from our knowledge to make in milling, turning, correction, metrology
and sawing for parts of mechanics of precision or tools end. We work primarily on unit parts
or small series.
We work all types of materials on our various machines with numerical controls for small
series or single parts. In addition to the realization of parts, we take very precise
measurements thanks to our very powerful material of metrology.
Efollows to the installation of one followed quality, we are certified AECMA EASE (European
Aerospace Supplier Evaluation). This standard, much more strict than the ISO approval, is an
international recognition to know to make and of quality, guaranteed for you of a neat and
precise work.
Having initially acquired great experience in the field of the armament, a sector which
occupied an important place of industry inhabitant of Liège, our company was brought with
the passing of years to widen considerably its sphere of activity, parallel to the request of
increasingly diversified and specialized customers, seeking an effective and sure
subcontracting with which to entrust work increasingly more pointed.
From now on, our sphere of activity extends to the following sectors:





Equipment of machines.
Special cutters and tool holders for throwaway pads.
Standard tool holders.
Aeronautics (components for the program ARIANE 5).
Car (equipment of assembly lines).
Back to homepage
TI GROUP AUTOMOTIVE SYSTEMS
Au Wérihet 63
4020 WANDRE
Tel: 32-(0)43459555 - Fax: 32-(0)43629857 - Mobile: 32-(0)479910354
Email: jleonard@be.tiauto.com - Web: www.tiautomotive.com
Contact person: Mr Jean-Philippe LEONARD
Fluid thinking™ shapes the mindset of TI Automotive. Global automotive manufacturers turn
to TI Automotive for insight and focus to develop industry-changing, award-winning fluid
storage, carrying and delivery technology. With 18,500 employees at 130 locations in 28
countries, our strength lies in our ability to creatively meet and exceed the increasing fuel
economy and emissions regulations of tomorrow’s auto industry.
Fluid Carrying Systems
Building on nearly 100 years of experience, the TI Automotive Fluid Carrying Systems
Division designs and manufactures fluid-carrying systems that meet the complex assembly,
design and performance challenges of the automotive industry, including:








Fuel lines
Brake lines
Tank top lines
ABS/ESP Bundles
Heated SCR Lines
Vacuum booster lines
Brake and fuel bundles
Exhaust treatment lines
Our expertise embraces the development and manufacture of multilayer low-permeation
plastic tubes, high-pressure steel double-wall and single-wall tubes, quick connectors and
flexible lines. To meet the demanding requirements of the modern automotive industry, TI
Automotive has developed specialty internal and external coatings designed to withstand
corrosion, abrasion and other environmental hazards.
Our global manufacturing presence serves all the established markets as well as the newly
developing markets around the world. This global manufacturing presence combined with
our global technical development centers enables us to provide an unrivaled level of service
to the global automotive industry from design to manufacture to just-in-time delivery.
Product Highlights
Systems that combine and integrate high-performance materials and components such as:





Double-wall steel tubing that can be combined with an extensive range of
anticorrosion/antiabrasion coatings such as NyAl (aluminum and polyamide coating)
NyZinc (Zinc and polyamide coating), NyGal (Galfan and polyamide coating), PVF and
many others. These tubes can be provided with a polypropylene jacket to provide
outstanding abrasion resistance.
Single-wall steel tubing with the same coating range as double-wall tubing but with
the addition of a nickel-coated internal diameter to withstand the corrosive
environment provided by modern-day fuels.
Multi-layer nylon tubing with a range of permeation barriers and high-temperature
capabilities.
Easy-to-assemble Quick Connectors that form an integral part of the overall fuel
system through the use of spin-welding joints.
Heated nylon tubes for use in Selective Catalytic Reduction systems for NOx
reduction.
Powertrain Components
The TI Automotive Powertrain Components Division develops products that contribute to
the improvement of fuel economy, performance and emissions. Our growing product
portfolio includes a range of innovative, cost-effective components for fluid storage and
transfer in engine, transmission, turbocharger and oil systems, including:







Gasoline Direct Injection (GDI) lines and rails
High-Pressure Diesel (HPD) lines and rails
Exhaust treatment tubes and pipes
Engine oil feed and return lines
Vacuum and ventilation tubes
Heating and cooling lines
Power steering tubes





Transmission tubes
Turbocharger lines
Engine oil screens
Engine oil gauges
Airbag tubes
Tank Systems
TI AUTOMOTIVE’s Fuel Tank Systems Division develops and manufactures innovative, awardwinning fuel tank systems for diesel, gasoline and flex-fuel applications. TI Automotive fuel
tanks improve fuel system performance and are engineered for a wide range of packaging
options, reduced evaporative emissions and low weight.
Products include:






Plastic fuel tanks for gasoline, diesel and flex-fuel vehicles
Plastic fuel tanks for Low Emission Vehicles (LEV)
Plastic fuel tanks for Partial Zero Emission Vehicles (PZEV)
Fuel tank systems for hybrid applications
Delivery and return components
Fuel filler tubes
Product highlights
Plastic fuel tanks from TI Automotive are setting new standards in lightweight, advanced
packaging technology with emissions levels at, or better, than steel. They are also corrosion
free and incorporate unique slosh noise-prevention technology, added durability and
reliability capabilities. Leveraging our global supply footprint, TI Automotive has been a
leader in integrating designs and manufacturing processes for zero-emission vehicles.
Integrated construction with fuel system components sealed inside, feature the lowest
permeation levels of any plastic tank on the market today.
Pump & Module Systems
TI AUTOMOTIVE’s award-winning pumps and modules for gasoline, diesel and flex-fuel
vehicles are designed for quiet, efficient, low-voltage performance and unsurpassed
durability. We offer a comprehensive line of reliable pumps and modules designed to handle
economy-enhancing high-pressure fuel systems.
Products include:





Pumps
Modules
Electronics
Contact resistive, noncontact piezo and sealed level sensors
Additive dosing systems
HVAC Fluid Systems
TI AUTOMOTIVE’s HVAC Fluid Systems Division provides a complete portfolio of fluidcarrying products designed for lightweight, cost-effective, durable performance.
Our complete line of HVAC carrying systems includes:




Air-conditioning tube and hose assemblies
Accumulators and receiver dryers
Coaxial or tube-in-tube assemblies
Heater and radiator hoses
Through the use of innovative materials and size options, TI Automotive HVAC Fluid Systems
products reduce noise, boost efficiency and provide innovative solutions to meet the latest
refrigerant regulations.
Aftermarket
TI Automotive brings the same level of innovation, quality and performance to its
aftermarket products that it does for original-equipment product. That’s why the
aftermarket industry’s leading brands turn to TI Automotive for the most complete offering
of true, OE-quality fuel system replacement parts.
Back to homepage
TRAXXEO
Fond Jean Pâques 6D
1348 OTTIGNIES-LOUVAIN-LA-NEUVE
Tel: 32-(0)10455425 – Fax: 32-(0)10816366
Email: gaetan.peeters@traxxeo.com - Web: www.traxxeo.com
Contact person: Mr Gaétan PEETERS
TRAXXEO develops and sells geo-location software based on GPS technologies, making it
possible to locate, monitor and control various designated vehicles and plant, to record this
data, and subsequently to preserve it, look it up and print it. The purpose of this is to
improve profitability and reduce operating costs for our customers.
Sectors of activity: specialization in “site” businesses (public works, construction, electricity
companies, installations, others...), transport (sub-contractors, own fleet, coach
operators...).
Research and development
•
•
•
•
•
•
•
Specially developed for the construction sector.
Day to day management of vehicles, plant and people on sites.
High performance management of mobility of workers/employees and
analysis of the CO2 tax applicable to the whole vehicle fleet.
Interface with all types of GPS hardware.
Real time display of the fleet on a map.
Summary reports on demand.
Mobile 2 Work: PDA application for creating and managing.
Back to homepage
TREVIRA BELGIUM
Rue Georges Mauroy 10
7970 QUEVAUCAMPS
Tel: 32-(0)69590307 - Fax: 32-(0)71347399
Email: trevira.info@trevira.com - Web: www.trevira.com
Contact person: Mr Jean-Marie NAMUR
From the fibre and flat filament yarn through to dyed textured yarns, TREVIRA is the only
supplier in the world that offers the complete range of textile polyester products from the
one source.
We offer high-value staple fibres and filament yarns for all textile applications, from home
and contract textiles, automotive textiles and apparel, to hygiene products and technical
applications.
Fibres
A comprehensive range of special fibre types for ring yarn, woollen yarn, worsted and cotton
spinning, as well as for nonwovens
Filaments
A comprehensive range of filament yarns, from 22 to 4000 dtex.
Our products are noted for their permanent functional properties. Our numerous specialities
form one of the most comprehensive product ranges for fibre and filament yarns.


TREVIRA fibres and yarns are low-pill, microfine, elastic, breathable, flame retardant
or antimicrobial, depending on the requirements of the end product. In many
instances several additional functions are combined in the one fibre/yarn.
We offer special fibres for all textile applications, for use 100% or in blends with
wool, cotton and other materials, as well as for nonwovens and technical
applications.


These are accompanied by a brand that is internationally known and by quality that is
tested, both underpinned by the security of our trademark contracts.
Our raw material polyester is not only friendly to the environment in its manufacture,
but in all downstream stages of processing. All TREVIRA fibres and filaments bear the
Oeko-Tex Standard 100 Certificate.
Back to homepage
TRIPY
Faubourg de Bruxelles 320
6041 GOSSELIES
Tel: 32-(0)71347490 - Fax: 32-(0)71347399 - Mobile: 32-(0)475520114
Email: info@tripy.be - Web: www.tripy.be
Contact person: Mr Jean-Christophe SPRIMONT
The GPS for memorable trips
Tarmac-burning bikers, off-road addicts and lovers of stylish classic cars, put your trust in the
TRIPY II GPS and experience the rides of your dreams. With TRIPY, the route always takes
priority over the destination.
Back to homepage
TUNINGBOX
Ruthier 1
4950 FAYMONVILLE
Tel: 32-(0)80678372 - Fax: 32-(0)80678766 – Mobile: 32-(0)495528372
Email: info@tuningbox.com - Web: www.tuningbox.com
Contact person: Mr Didier HERMANN
Original TUNINGBOX: innovative since 1996
Power and economy for your engine
The TUNINGBOX ® unit enhances the performance of your turbo diesel engine, from 25% to
30% (power and torque) and also reduces consumption by up to 10%.
The installation is very easy; you connect a little module between the original calculator and
the injection system of your car.
TUNINGBOX ® is equipped with connectors identical to those used by the
manufacturers. This allows a fast and efficient connection without cables cutting and
resoldering. So, if you wish to take out the additional unit, you can do so by using simple
plugs. It leaves no trace on the engine, or in the computer memory of the vehicle.
By operating within the manufacturers’ tolerance limits, TUNINGBOX ® does not in any way
reduce the life span of the engine or other organs of your car.
TUNINGBOX ® is developed in a high-performance development centre and distributed in
over 30 countries.
Back to homepage
UNIVERSITY OF LIEGE – LTAS – ENGINEERING AUTOMOTIVE RESEARCH GROUP
Chemin des Chevreuils 1
4000 LIEGE
Tel: 32-(0)43669194 - Fax: 32-(0)43669159
Email: p.duysinx@ulg.ac.be - Web: www.ltas.ulg.ac.be/cmsms/
www.ingveh.ulg.ac.be/
Contact person: Mr Pierre DUYSINX
(www.ulg.ac.be/cms/c_609885/pierre-duysinx-engineer-land-vehicles)
The Aerospace and Mechanical Engineering Department at the University of Liege conducts
research in the areas of Computational and Experimental Mechanics and more particularly in
the fields of Solid Mechanics and Materials, Fluid Mechanics, Biomechanics, Energetics and
Applied Thermodynamics.
The Department is composed of 23 Faculty members and more than 100 research engineers,
doctoral and postdoctoral fellows. Its mission is threefold: Education, Research and Service.
The Department offers accredited undergraduate and graduate programs leading to
Bachelor, Master and Ph.D. degrees in Aerospace, Mechanical, Electromechanical and
Physics engineering.
Research activities encompass the broad areas of Aerospace, Aeronautics and Mechanics
with close ties with industry and international research centers.
On the service side, the facilities include a large subsonic wind-tunnel, a machine shop for
manufacturing in-house equipment and several state-of-the-art laboratories for advanced
computation, combustion, fabrication, metrology of mechanical systems, vehicle dynamics,
vibration testing, metallic and composite materials, packaging, thermodynamics and
turbomachine.
Studies on the recycling of the out-of-service vehicles (VHU); characterization and treatment
of the residues of automobile grinding (RBA)
Back to homepage
VALCOLOR
Drève Gustave Fache 17
7700 LUINGNE
Tel: 32-(0)56863300 - Fax: 32-(0)56842470
Email: info@valcolor.be - Web: www.valcolor.be
Contact person: Mr Olivier FRANCOIS
VALCOLOR SPRL is a specialist manufacturer of industrial and house painting/coating,
protection varnish, RAL aerosol paint, signal and road-line paint. The products offered by
VALCOLOR are dedicated to professionals from the Industry and Building sectors.
Here comes a non-exhaustive list of the fields of application where VALCOLOR intervenes:
Car accessories, Farm-produce industry, Food industry, Anticorrosion, Anti-graffiti, Film
applicator, Buckets, Car and truck bodies, Frameworks, Sheet metal works, Modular
structures, Containers, Tanks/cisterns/bottles, Advertising signs, Maintenance (factory),
Industrial equipment, Railway industry, Chemical industries, Industrial premises/Siding,
Machine tool and handling industry, Plastics, Office furniture, Street furniture, Engines and
pumps, Floors, Industrial sheet metal working.
VALCOLOR is a service above all:
One of VALCOLOR's strongest asset is its rapid completion time of client orders. Indeed, any
order placed before noon can be picked-up within the afternoon in reasonable quantities
(Max. 400 L).
VALCOLOR is also famous for its flexibility to meet the customer's specific needs, a
personalized service according to their technical and logistic requirements.
Thanks to this flexible structure VALCOLOR can easily meet the quantitative requirements of
the clientele and deliver from 5 liters to thousands of liters within a short lead time.
As for the delivery, you can pick up your goods at the counter (fastest way) or you may
prefer to be delivered within 24H everywhere in Belgium.
Finally, VALCOLOR offers quality insurance for all its products by choosing the best raw
materials and by its manufacturing experience.
Back to homepage
VALEO VISION BELGIQUE
Parc Industriel - Rue du Parc Industriel 31
7822 MESLIN-L'EVEQUE
Tel: 32-(0)68265211 - Fax: 32-(0)68265499
Email: alain.marlier@valeo.com - Web: www.valeo.com
Contact person: Mr Alain MARLIER
An independent industrial Group fully focused on the design, production and sale of
components, integrated systems and modules for the automotive industry, mainly for CO2
emissions reduction, VALEO ranks among the world's top automotive suppliers.
Four Business Groups and a VALEO Service aftermarket activity offer customers innovative
global solutions, in particular in their drive to reduce CO2 emissions.
VALEO has 4 Business Groups, comprising 16 Product Groups, supplying the original
equipment market and the aftermarket.


For original equipment segment, VALEO supplies all major automakers worldwide
For replacement parts and services, VALEO supplies the original equipment spares
(OES) and independent aftermarket (IAM) through its dedicated VALEO SERVICE
organization.
The 4 Business Groups are: Powertrain Systems, Thermal Systems, Comfort and Driving
Assistance Systems, and Visibility Systems.

Powertrain Systems
This Business Group develops innovative solutions to reduce fuel consumption and CO2
emissions, while maintaining driving pleasure. These solutions include a complete range of
products for the electrification and hybridization of vehicles.
The Powertrain Systems Business Group comprises five Product Groups: Electrical Systems,
Transmission Systems, Engine Management Systems, Air Management Systems, and Hybrid
and Electric Vehicle Systems.

Thermal Systems
These systems ensure greater efficiency and autonomy, longer-lasting components, as well
as greater comfort, whatever the outside temperature. The technologies developed by this
Business Group contribute to optimizing cabin comfort and to reducing energy consumption.
The Thermal Systems Business Group comprises four Product Groups: Climate Control,
Powertrain Thermal Systems, Compressors, and Front-End Modules.

Comfort and Driving Assistance Systems
These systems improve safety and driving comfort by offering easy access and enhanced
360° visibility around the vehicle, while creating an ergonomic, intuitive relationship with
one’s environment.
The Comfort and Driving Assistance Systems Business Group comprises four Product Groups:
Driving Assistance, Interior Controls, Interior Electronics, and Access Mechanisms.

Visibility Systems
These systems offer solutions for all weather and driving conditions in order to see and be
seen. The systems developed by this Business Group contribute to safety by improving
visibility of the vehicle and the driver’s visibility, while saving energy.
The Visibility Systems Business Group comprises three Product Groups: Lighting Systems,
Wiper Systems, and Wiper Motors.
Back to homepage
VANHULEN HIGH PRECISION SPRINGS
Zoning Industriel des Hauts-Sarts - Zone 2 - Rue Haute Claire 3
4040 HERSTAL
Tel: 32-(0)42899999 - Fax: 32-(0)42890009 – Mobile: 32-(0)476708084
Email: info@vanhulen.be - Web: www.vanhulen.be
Contact person: Mr Pierre SCHAAPS
Compression springs, traction springs, form springs, torsion springs, and double torsion
springs.
Induction coils, locking rings, stamping of items in single or combined toolings, by electro
erosion, laser and chemical components for prototype building and small series.
Assembling of mechanical, plastic or electronic parts in using conventional or specific
processes (tig and ion-beam welding ...).
The quality of the VANHULEN products is officially certified by standards such as ISO
9001:2008, EN 9100, and ISO/TS 16949:2009.
Back to homepage
VANWERS (ATELIERS FERNAND)
Rue Jean-Baptiste Cools 35
4000 LIEGE
Tel: 32-(0)42272684 - Fax: 32-(0)42276813
Email: robert.bouillon@vanwers.com - Web: www.vanwers.com
Contact person: Mr Robert BOUILLON
The ATELIERS F. VANWERS is a typical family company developed thanks to the hard work of
one independent. The history of the company goes back to 1946, at a moment when
FERNAND VANWERS starts to make pieces in series with only a few turning and milling
machines in premises in Wandre. In 1950, the company buys grinding machines and tools for
the construction of dies. From that moment on, the company will continue to progress on a
regular basis and this thanks to experience but also a permanent desire to closely follow the
evolution from a technical and industrial point of view.
In 1972, the company will take a decisive turn. A neighbour of ATELIERS VANWERS, who
makes rings retires. FERNAND VANWERS buys the company and in one time doubles the
production surface. And so here he is, well settled in the neighbourhood with adjacent
premises and an important production surface that goes from one street to another.
Even if ATELIERS F. VANWERS continues to make rings, the main activity of the company
remains the production of precision tools and more precisely cutting and folding dies. The
production of such pieces requires the appropriate machinery capable of grinding to the
micron. This is the reason why the company obtained the label: « Precision mechanical
workshop».
The important machine park has been replaced several times. Evolution progresses fast and
in order to continue to improve the performances, a more and more advanced technology
has to be used. The actual numeric machines that are used today mainly come from
Switzerland, Germany and England.
Today ATELIERS FERNAND VANWERS occupies a covered surface of 1837 m² and a noncovered surface of 360 m² and employs around thirty workers.
The main activities of the company are:





High precision mechanic pieces in all kinds of materials, light alloy, alloyed steel with
high resistance, titanium alloys, pieces going to diameters of 2000 mm and lengths of
4000 mm.
Precision tools and calibers.
Dies, moulds, pliers, milling machines, axes de pistons, rings and special washers
Pieces made by electro erosion, wire-cut and ploughing systems.
Pieces made in small series destined for space shuttle Ariane as well as airplane
motors.
In addition, the company has ISO9001 (ed.2000), OTAN, EN 9100 (EASE, QUALIFAS)
certifications and also takes part in aeronautics and aerospace programs like CFM56, ARIANE
5, VULCAIN, GE90, AIRBUS A380 and the aerospace project Vinci.
Back to homepage
VISIO ING CONSULT
Rue de Wavre 17
4280 HANNUT
Tel: 32-(0)19636448 – Fax: 32-(0)19636448
Email: f.gerard@visioingconsult.be - Web: www.visioingconsult.be
Contact person: Mr Frédéric GERARD
Industrial vision Vic-control®: Turnkey system integrator for product quality control and
compliance checks in production lines by means of optical and sensors systems.
Inventory management, logistics: SGW - Stock Get Way® WMS developed for medium to
large companies, with the aim to offer full traceability of products from supplier to
customer. It is a ready-made solution for stock management, order handling, shipping of
parcels and pallets and the logistic.
Research and development
Engineering and consultancy
Analysis, development and technical implementation of IT projects. Feasibility studies,
follow-up, co-ordination and final implementation of IT projects.
Back to homepage
VTC
Avenue de l'Eau Vive 2
7700 MOUSCRON
Tel: 32-(0)56554966 – Fax: 32-(0)56348662
Email: info@vtc.be - Web: www.vtc.be
Contact person: Mr Jean-Louis MATTON
Make fit out your commercial vehicle by VTC will spare you costs, will give you more space
and time, and will optimize your professionalism to your customers. A perfect arrangement
of vehicles is the reflection of your image. Your business card on the road.
Active since 1996, VTC was ceaselessly outlined through years in the developments of
commercial vehicles. By the modular character and the compatibility with all the brands, we
have a solution as well for the little as for the big vehicles.
Back to homepage
WARNY & CIE
Zone Industrielle I - Talstrasse 16-18
4780 SAINT-VITH
Tel: 32-(0)80221480 – Fax: 32-(0)80221482
Email: info@warny.com - Web: www.warny.com
Contact person: Mr Michael WARNY
From design to production: WARNY, a team to realize your projects.
WARNY produces about 4000 different parts, for the most common car types.
All kind of metal forming, steel and high-grade steel: deep-drawing, punch-pressing, cutting,
stamping, welding.
Our machinery:







mechanical and hydraulic presses up to 630 t
max size of the table 3200 mm x 2000 mm
coiling machine max width 1530 mm
welding robot - ROMAT - A310 (CLOOS)
sheet metal folding presses
guillotine shear
spot welding machines
Development and manufacture of welding and controlling gauges
Production of half-shells for silencers, catalysts and head shields
Manufacture of punch-pressing, deep-drawing and stamping tools.
2 copy frasers (max 1200 x 900)
2 CNC controlled milling machines
We work with the programs CAD Solid Works and MASTERCAM and we can read nearly all
files.
Our development department looks forward to realize your future projects.
Development, design and manufacture of tools by using newest construction technologies:
Cad Solid Works
Mastercam
Development and manufacture of welding and controlling gauges
Back to homepage
WOIT
Rue Pépin 33-35
4040 HERSTAL
Tel: 32-(0)42641522 – Fax: 32-(0)42481121 – Mobile: 32-(0)497411717
Email: info@woit.be - Web: www.woit.be
Contact person: Mr Didier MEUNIER
WOIT is a foundry that specializes in the casting of non-ferrous metals, aluminium, bronze,
copper-aluminium alloys, zamak and brass.
The company produces its own die casts and sand and shell moulds, and provides a
machining and assembling service for all metal parts.
We also provide digitally-controlled finishing services
Back to homepage